Microsemi Collaborates with HMS Industrial Networks AB to Introduce Highly Secure Anybus CompactCom 40 Industrial Protocol Solutions

ALISO VIEJO, Calif., Sept. 16, 2015 /PRNewswire/ -- Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, and HMS Industrial Networks (HMSN.ST), a leading supplier of communications technology for industrial automation, announced the availability of HMS's Anybus CompactCom 40-series products for industrial Ethernet solutions based on Microsemi's SmartFusion2 system-on-chip (SoC) field programmable gate array (FPGA) device. The highly secure device offers customers lower total cost of ownership and accelerated time-to-market with low power and secure industrial Ethernet protocol conversion solutions on a single SmartFusion2 FPGA platform.

Microsemi Corporation

"We welcome HMS as an ecosystem provider and are pleased HMS Industrial Networks has successfully leveraged the industry-leading features of Microsemi's SmartFusion2 SoC FPGA, including its reliability, security, low power, compact form factor and high levels of integration into a variety of its unique industrial Ethernet devices," said Jason Chiang, senior marketing manager at Microsemi. "The high value of our technology is demonstrated by the increased adoption of SmartFusion2 with partners and customers seeking to contain their total cost of ownership by implementing, for example, support for multiple industrial Ethernet standards on one FPGA platform with unique security features."

HMS's Anybus CompactCom 40-series products offer hardware solutions specifically designed for factory automation applications including programmable logic controllers (PLCs), motor drives, motion drive control and safety modules, as well as other applications for industrial customers. HMS products are available in chip, brick and module product offerings, allowing customers to avoid designing ASSP/ASIC-specific boards for each industrial Ethernet standard. Customers can use HMS's CompactCom 40-series and program Microsemi's FPGA to the desired industrial Ethernet protocol standards with the intellectual property (IP) and software stack for the ARM® Cortex-M3 microcontroller in SmartFusion2.

Collaborations between Microsemi and ecosystem solutions providers like HMS align well with Microsemi's commitment to the growing industrial Ethernet market. Microsemi's highly secure SmartFusion2 SoC FPGA offers layered hardware and software solutions to protect the IP, platform, manufacturing flow and data layer according to a customer's specific needs. The low power FPGA architecture also enables use of the device in compact solutions such as the Anybus CompactCom 40-series products from HMS. Should customers need to connect their industrial Ethernet boards to a larger network, Microsemi offers Ethernet switches and PHYs, Power-over-Ethernet (PoE) integrated circuits (ICs) and midspan products to complement HMS's industrial Ethernet solutions.

"Our Anybus CompactCom 40-series products benefit from the flexibility of using SmartFusion2 technology when designing the NP40 that is the core in the Anybus CompactCom, enabling support of multiple industrial Ethernet protocols on a single FPGA platform and accelerating time-to-market while lowering total cost of ownership for our customers," said Christian Bergdahl, product marketing manager at HMS Industrial Networks. "We were able to leverage on SmartFusion2's advantages when designing the NP40 into scalable, reprogrammable, low power and secure industrial Ethernet solutions with a simple purchase model—allowing us to continue bringing our customers the latest industrial connectivity technology for embedded solutions."

According to HMS Industrial Networks' internal analysis, although serial fieldbus protocols still dominate industrial networking today, industrial Ethernet is growing at a rate of 17 percent per annum—more than double the fieldbus growth rate. This growth allows HMS Industrial Networks and Microsemi to continue developing products catering to the specific needs of this expanding market opportunity.

HMS Industrial Networks is now offering its Anybus CompactCom 40-series products to its customers. For more information on the company's solutions leveraging Microsemi's SmartFusion2 technology, visit http://www.microsemi.com/products/fpga-soc/design-resources/partners/hms-industrial-networks and http://www.anybus.com/products/abcc40.shtml.  For more information on Microsemi's industrial Ethernet networking solutions, visit http://www.microsemi.com/applications/industrial/industrial-ethernet.

About Microsemi's SmartFusion2 SoC FPGAs
SmartFusion2 SoC FPGAs integrate inherently reliable flash-based FPGA fabric, a 166 megahertz (MHz) ARM Cortex-M3 processor, advanced security processing accelerators, DSP blocks, SRAM, eNVM and industry-required high performance communication interfaces, all on a single chip. Microsemi's SmartFusion2 SoC FPGAs are designed to address fundamental requirements for advanced security, high reliability and low power in critical communications, industrial, defense, aviation and medical applications.

About HMS Networks AB
HMS Networks AB (publ) is a world-leading supplier of communication technology for industrial automation. Sales amounted to SEK 589 million in 2014. Over 90% of these sales were to customers located outside Sweden. All development and the major portion of manufacturing are carried out at the head office in Halmstad and at the Technology Center in Ravensburg. Sales offices are located in Japan, China, Germany, Denmark, India, UK, USA, Italy and France. HMS has 370 employees and produces network interface cards and products to interconnect different networks under the trademark Anybus® and IXXAT® and products for Remote Management under the trademark Netbiter®. HMS is listed on NASDAQ-OMX Nordic Exchange in Stockholm in the category Mid Cap, Information Technology.

About Microsemi
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for communications, defense & security, aerospace and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete components; security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, Calif, and has approximately 3,600 employees globally. Learn more at www.microsemi.com.

Microsemi and the Microsemi logo are registered trademarks or service marks of Microsemi Corporation and/or its affiliates. Third-party trademarks and service marks mentioned herein are the property of their respective owners.

"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Any statements set forth in this news release that are not entirely historical and factual in nature, including without limitation statements to the availability of HMS's Anybus CompactCom 40-series products for industrial Ethernet solutions based on Microsemi's SmartFusion2 SoC FPGA device, and the potential effect of the foregoing on future business, are forward-looking statements. These forward-looking statements are based on our current expectations and are inherently subject to risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. The potential risks and uncertainties include, but are not limited to, such factors as rapidly changing technology and product obsolescence, potential cost increases, variations in customer order preferences, weakness or competitive pricing environment of the marketplace, uncertain demand for and acceptance of the company's products, adverse circumstances in any of our end markets, results of in-process or planned development or marketing and promotional campaigns, difficulties foreseeing future demand, potential non-realization of expected orders or non-realization of backlog, product returns, product liability, and other potential unexpected business and economic conditions or adverse changes in current or expected industry conditions, difficulties and costs of protecting patents and other proprietary rights, inventory obsolescence and difficulties regarding customer qualification of products. In addition to these factors and any other factors mentioned elsewhere in this news release, the reader should refer as well to the factors, uncertainties or risks identified in the company's most recent Form 10-K and all subsequent Form 10-Q reports filed by Microsemi with the SEC. Additional risk factors may be identified from time to time in Microsemi's future filings. The forward-looking statements included in this release speak only as of the date hereof, and Microsemi does not undertake any obligation to update these forward-looking statements to reflect subsequent events or circumstances.

Logo - http://photos.prnewswire.com/prnh/20110909/MM66070LOGO

To view the original version on PR Newswire, visit:http://www.prnewswire.com/news-releases/microsemi-collaborates-with-hms-industrial-networks-ab-to-introduce-highly-secure-anybus-compactcom-40-industrial-protocol-solutions-300143381.html

SOURCE Microsemi Corporation

Data & News supplied by www.cloudquote.io
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.