9.30.2013 10K


UNITED STATES SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C.   20549
____________________________________________
FORM 10-K
ý
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 FOR THE FISCAL YEAR ENDED SEPTEMBER 30, 2013
OR
o
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 FOR THE TRANSITION PERIOD FROM ____ TO ____.
 Commission File No. 0-21820
_________________________________________
KEY TECHNOLOGY, INC.
(Exact name of registrant as specified in its charter)
 
Oregon
(State or jurisdiction of incorporation or organization)
93-0822509
(I.R.S. Employer Identification No.)
150 Avery Street
Walla Walla, Washington
(Address of Principal Executive Offices)
99362
(Zip Code)
 Registrant’s telephone number, including area code:  (509) 529-2161
__________________________________________
  Securities registered pursuant to Section 12(b) of the Act:
 
Title of each class
Common Stock, no par value
Preferred Stock Purchase Right
Name of each exchange on which registered
 The NASDAQ Global Market
 Securities registered pursuant to Section 12(g) of the Act:
None
 Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
Yes  ¨ No  ý 
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.
Yes  ¨ No  ý 
Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Sections 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes  ý No  ¨ 
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes  ý No  ¨ 
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ¨ 
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company.  See the definitions of “accelerated filer,” “large accelerated filer” and “smaller reporting company” in Rule 12b-2 of Exchange Act.  (Check one):
 
Large accelerated filer o
Accelerated filer ý
Non-accelerated filer o (Do not check if a smaller reporting company.)
Smaller reporting company o
 Indicated by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    
Yes  ¨ No  ý
The aggregate market value of the Registrant's common stock held by non-affiliates on March 31, 2013 (based on the last sale price of such shares) was approximately $69,118,000.
 There were 6,281,682 shares of the Registrant's common stock outstanding on December 6, 2013.
 DOCUMENTS INCORPORATED BY REFERENCE
Parts of Registrant's Proxy Statement, dated on or about January 2, 2014, prepared in connection with the Annual Meeting of Shareholders to be held on February 5, 2014, are incorporated by reference into Part III of this Report.



KEY TECHNOLOGY, INC.
2013 ANNUAL REPORT ON FORM 10-K
TABLE OF CONTENTS

 
 
PAGE
 
 
 
 
 
 
 
 







INFORMATION CONCERNING FORWARD-LOOKING STATEMENTS

From time to time, Key Technology, Inc. (“we," "us" or "our"), through its management, may make forward-looking public statements with respect to the company regarding, among other things, expected future revenues or earnings, projections, plans, future performance, product development and commercialization, and other estimates relating to our future operations.  Forward-looking statements may be included in reports filed under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), in press releases or in oral statements made with the approval of an authorized executive officer of the company.  The words or phrases “will likely result,” “are expected to,” “intends,” “is anticipated,” “estimates,” “believes,” “projects” or similar expressions are intended to identify “forward-looking statements” within the meaning of Section 21E of the Exchange Act and Section 27A of the Securities Act of 1933, as amended, as enacted by the Private Securities Litigation Reform Act of 1995.

Forward-looking statements are subject to a number of risks and uncertainties, the occurrence of any of which could cause the price of our common stock to fluctuate significantly, making it difficult for shareholders to resell common stock at a time or price they find attractive.  We caution investors not to place undue reliance on our forward-looking statements, which speak only as to the date on which they are made.  Our actual results may differ materially from those described in the forward-looking statements as a result of various factors, including those listed below:

•
changes in general economic conditions and disruption in financial markets may adversely affect the business of our customers and our business and results of operations;
•
ongoing uncertainty and volatility in the global financial markets may adversely affect our operating results;
•
discord, conflict, and lack of compromise within and between the executive and legislative branches of the U.S. government related to federal government budgeting, taxation policies, government expenditures, and U.S. borrowing/debt ceiling limits could adversely affect our business and operating results;
•
economic conditions in the food processing industry, either globally or regionally, may adversely affect our revenues;
•
the loss of any of our significant customers could reduce our revenues and profitability;
•
significant investments in unsuccessful research and development efforts could materially adversely affect our business;
•
industry consolidation could increase competition in the food processing equipment industry;
•
we are subject to price competition that may reduce our profitability;
•
the significance of major orders could result in significant fluctuation in quarterly operating results;
•
the failure of our independent sales representatives to perform as expected would harm our net sales;
•
we have made, or may make, acquisitions, or enter into distribution agreements or similar business relationships that could disrupt our operations and harm our operating results;
•
our international operations subject us to a number of risks that could adversely affect our revenues, operating results and growth;
•
fluctuations in foreign currency exchange rates could result in unanticipated losses that could adversely affect our liquidity and results of operations;
•
advances in technology by competitors may adversely affect our sales and profitability;
•
our existing and new products may not compete successfully in either current or new markets, which would adversely affect our sales and operating results;
•
our expansion into new markets, increasingly complex projects and applications, and integrated product offerings could increase our cost of operations and reduce gross margins and profitability;
•
our inability to obtain products and components from suppliers would adversely affect our ability to manufacture and market our products;
•
our information systems, computer equipment and information databases are critical to our business operations, and any damage or disruptions could adversely affect our business and results of operations;
•
our potential inability to retain and recruit experienced management and other key personnel, or the loss of key management personnel, may adversely affect our business and prospects for growth;
•
the potential inability to protect our intellectual property, especially as we expand geographically, may adversely affect our competitive advantage;
•
intellectual property-related litigation expenses and other costs resulting from infringement claims asserted against us by third parties may adversely affect our results of operations and our customer relations;
•
our subsidiary Visys N.V. is involved in ongoing litigation that may result in an adverse outcome, and regardless of the outcome we will be forced to expend resources as a participant in the litigation;
•
our dependence on certain suppliers may leave us temporarily without adequate access to raw materials or products;
•
our operating results are seasonal and may further fluctuate due to severe weather conditions affecting the agricultural industry in various parts of the world;
•
the limited availability and possible cost fluctuations of materials used in our products could adversely affect our gross margins;

1


•
compliance with recently passed health care legislation and increases in the cost or providing health care plans to our employees may adversely affect our business;
•
our reported results may be affected adversely by the implementation of new, or changes in the interpretation of existing, accounting principles or financial reporting requirements, which could require us to incur substantial additional expenses; and
•
compliance with changing regulation of corporate governance and public disclosure will result in additional expenses to us and pose challenges for our management.

Given these uncertainties, readers are cautioned not to place undue reliance on the forward-looking statements.  We disclaim any obligation subsequently to revise or update forward-looking statements to reflect events or circumstances after the date of such statements or to reflect the occurrence of anticipated or unanticipated events.

PART I


ITEM 1.
BUSINESS.

General

Key Technology was founded in 1948 as a local producer of vegetable processing equipment.  We have evolved into a worldwide supplier of process automation solutions to the food processing industry and other industries such as tobacco and pharmaceuticals. We were incorporated in 1982 as a result of a management buyout of our predecessor organization.

We and our operating subsidiaries design, manufacture, sell and service process automation systems that process product streams of discrete pieces to improve safety and quality.  These systems integrate electro-optical automated inspection and sorting systems with process systems that include specialized conveying and preparation equipment. We provide parts and service for each of our product lines to customers throughout the world.

Net sales for the year ended September 30, 2013 were $136.8 million compared with $115.2 million for fiscal 2012 and $116.3 million for fiscal 2011.  We reported net earnings for fiscal 2013 of $4.0 million, or $0.69 per diluted share, compared with net earnings of $0.4 million, or $0.08 per diluted share, for fiscal 2012 and a net earnings of $1.5 million, or $0.27 per diluted share, for fiscal 2011.  Export and international sales for the fiscal years ended September 30, 2013, 2012 and 2011 accounted for 45%, 45% and 41% of net sales in each year, respectively.  Total assets at September 30, 2013 were $114.6 million compared to $86.4 million at September 30, 2012 and $94.4 million at September 30, 2011.

Industry Background

Food Processing Industry

Our primary market is the food processing industry where we apply our processing knowledge and application expertise to help customers improve quality, increase yield, and reduce cost. Our integrated sorting, conveying, and process automation systems are sold to small, medium and large-sized food processing companies for a range of specialized applications. Food processors generally experience thin profit margins and, therefore, are focused on increasing profitability and efficiency in their processing plants by improving the performance of their equipment and processing lines. In addition, food processors recognize the value of new technology and continue to demand innovative equipment that addresses food safety, quality, and automation to drive productivity in their plants.

Our strategy is to offer equipment solutions that reduce reliance on manual inspection and address the common food processing industry problems associated with high labor costs, availability of labor, inadequate yields, and inconsistent product quality and food safety.  In highly developed markets, including those in North America and Western Europe, the substitution of automated processes for manual labor is well underway.  Food processors in these regions typically appreciate the value of replacing manual labor with automated systems and look for systems that will help maximize yields, product quality and food safety. In developing countries, interest in automation is rising as food processors in these regions increasingly strive to compete in a global economy by improving product quality and food safety.

Within the food processing industry, the greatest opportunities for automated inspection systems have been in potatoes, vegetables, and fruits where the frequency and severity of foreign material and defects is highly variable, depending on the countless factors that affect crops.  In addition, dried fruit and tree nuts are high value products and processors increasingly demand inspection

2


and automation to increase profitability. We believe that many additional applications for our automated inspection systems exist in other food processing markets and non-food markets.

The principal potato market served by our systems is potato strips (commonly referred to as french fries in the United States).  Potato strips have historically accounted for a very large portion of the frozen potato products produced in the U.S. and, with the expansion of American-style fast food chains in other countries, this market is growing internationally.  Investment in new potato strip processing facilities has increased slightly in comparison to historical levels, but demand remains strong in North America and Europe for new systems that improve yields and enhance product quality and food safety.  Although we have successfully been diversifying into other food and non-food markets in recent years to reduce dependence on this market, potato strips remain an important market along with other potato products such as wedges, curly fries, formed products, whole potatoes and potato chips.

Other important markets within the food processing industry are fruits and vegetables, including both fresh-cut produce and processed products that may ultimately be canned or frozen for institutional and retail customers. Because foreign material and product defects plague these field-harvested products, automated sorting enhances the quality and safety of the product while improving yields and reducing labor costs.  Our principal fruit and vegetable markets are fresh, frozen, canned and dehydrated green beans, corn, carrots, peas, onions, berries, cranberries, pears and peaches, as well as ready-to-eat fresh-cut salads.

As a result of the merger with Visys NV in early 2013, we are able to offer a suite of products that address the dried fruit and nut market.  Nut processors strive to produce various products (shelled or unshelled) that are free of foreign material, extraneous vegetative matter or out-of-specification nuts to increase the value of their product.  Numerous technologies and methodologies are applied at various steps in the processing line to further increase this value.  The processor’s quality objectives are achieved with our range of digital sorting systems and, when combined with our mechanical grading systems, create an integrated product package.

We believe that selected areas of the food processing industry will continue to present opportunities for growth.  In general, food processing companies remain financially viable, but are increasingly coming under pressure to increase profitability and improve product safety while maintaining or reducing prices for their own products.  By offering equipment that increases yields, enhances product quality and food safety, and results in reduced processing costs, we believe we are well positioned to satisfy the needs of the industry.

Seasonal fluctuations in the potato, fruit, and vegetable processing industries cause us to experience some predictable seasonality of orders and shipments.  Typically, orders and shipments for this industry tend to be lower during our first two fiscal quarters of the year than during the second half of the fiscal year.  Other, less seasonal markets that are served by the company include snack, bakery, dairy, poultry, and seafood products, as well as non-food markets.

Non-food Industries – Tobacco, Pharmaceuticals and Nutraceuticals

Processors, manufacturers and packagers in several non-food industries are interested in automated inspection systems that reduce costs, increase yields, and improve product quality and safety.  Our primary non-food markets include the tobacco industry, pharmaceuticals and nutraceuticals.

The tobacco industry accounted for less than 5% of our net sales in fiscal 2013.  With systems that remove non-tobacco related material from primary processing lines and threshing lines, we help tobacco processors maximize product quality.  In 2009, we entered into an original equipment manufacturer distribution agreement with Hauni Maschinenbau AG, a leading supplier of equipment to the tobacco industry.  The agreement gives Hauni exclusive rights to market our equipment to tobacco processors worldwide and makes Key Technology the sole supplier of optical sorting equipment to Hauni for the tobacco market.

In fiscal 2013, the pharmaceutical and nutraceutical industry, which is served by our pharmaceutical product line, SYMETIX®, also represented less than 5% of our net sales.  SYMETIX’s optical inspection systems for softgels and tablets remove defects and foreign capsules and tablets from the product stream.  These systems are of interest to brand owners, product manufacturers, and contract packers looking to assure product quality while reducing labor costs.

We own a 15% minority interest in Proditec SAS. Proditec, headquartered in France, is a leading manufacturer of automated, solid dose pharmaceutical inspection systems based on machine vision technology.  We and Proditec are promoting and selling inspection solutions in the pharmaceutical and nutraceutical markets.  
 

3


Products

The following table sets forth sales by product category for the periods indicated (in thousands):

 

Fiscal Year Ended September 30,
 

2013

2012

2011
Automated inspection systems

$
59,336


43
%

$
46,586


40
%

$
52,962


46
%
Process systems                                      

50,729


37
%

44,939


39
%

40,716


35
%
Parts and service                                      

26,718


20
%

23,649


21
%

22,650


19
%
Net sales

$
136,783


100
%

$
115,174


100
%

$
116,328


100
%

Service and maintenance contracts are less than 10% of total net sales and are therefore summarized with parts and service.

The following table sets forth the percent of total gross margin contributed by each product category for the periods indicated:

 
 
Fiscal Year Ended September 30,
 
 
2013
 
2012
 
2011
Automated inspection systems                                                                                   
 
44
%
 
40
%
 
45
%
Process systems                                                                                   
 
28
%
 
28
%
 
27
%
Parts and service                                                                                   
 
28
%
 
32
%
 
28
%
Total gross margin
 
100
%
 
100
%
 
100
%

Automated Inspection Systems

Automated inspection systems are used in various applications to detect and remove defects and foreign material from the product stream and help processors improve quality and increase the value of their end product.  Key offers a sophisticated range of digital sorting systems that recognize color, size, shape, structural properties, and chemical composition to detect the widest range of visible and invisible defects.

Depending on the needs of each application, our sorters can be designed with a combination of cameras and lasers to detect and remove a wide variety of defects and foreign material, which is an important contributor to food safety. When lasers are combined with high resolution cameras for superior shape, size, and color determination, the result is a high quality product. Advanced color and shape sorting can be accomplished with monochromatic or color cameras, coupled with powerful software algorithms. In addition, BioPrint™ technology, developed by Visys, identifies defects and foreign material based on unique biological characteristics and achieves enhanced performance, even under high incoming defect loads, and detects invisible defects.

Our popular belt-fed sorters - Optyx®, Tegra®, and Manta® - are primarily used in the fresh and frozen fruit, vegetable and potato products segments. Our chute-fed sorters, including the Visys Spyder®, Visys Python, and Visys Cayman®, and the jointly developed Taurys™, are ideal for sorting nuts, dried fruits, and frozen vegetables. Our other automated inspections systems include Veo™, an optical sorter designed specifically for seed corn; Tobacco Sorter™ tobacco sorting systems used in tobacco threshing and primary processing; and ADR® automatic defect removal systems used in the potato strip industry.

We also offer automated inspection equipment for solid dose pharmaceuticals and nutraceuticals through our SYMETIX pharmaceutical product line. Available in a range of sizes, VeriSym sorting systems inspect the color, size, and shape of tablets and softgels and automatically remove defects and foreign tablets or capsules from the product stream at rates of up to 1,000,000 tablets or capsules per hour.  These inspection systems help product manufacturers and contract packers assure the quality of their finished product and are designed to replace batch processing systems historically used in this industry.  

In July 2013, we signed an exclusive licensing agreement with EVK DI Kerschhaggl GmbH and Insort GmbH to deploy chemical imaging technology (CIT®) in our products, further enhancing our potato sorting capabilities. Additionally, an exclusive distribution agreement enables us to market Insort’s chemical imaging sorters to North American and global accounts in the potato industry.


4


We have a large installed base of automated inspection systems, which we support with upgrades to extend the life of the equipment and enable customers to continue operating at peak performance as technology advances.  Upgrades often provide customers with a less capital intensive alternative to acquiring new automated inspection systems.  

Process Systems

Conveying and processing equipment are utilized worldwide throughout many industries to move and process product within a production plant.  The process systems group includes standard and custom designed equipment that conveys, dewaters, transfers, distributes, aligns, feeds, meters, separates, grades, blanches, cooks, pasteurizes, cools, cleans, washes, and polishes products. Our Smart Shaker® vibratory solutions, which include Iso-Flo®, Impulse®, and Horizon™ systems, combine gentle material handling with a wide variety of processing functions in addition to vibratory conveying.  Rotary sizing and grading systems, Turbo-Flo® steam blanchers and SYMETIX equipment for pharmaceuticals and nutraceuticals, complete our conveying and processing equipment product line.  

The mechanical sizing, sorting, separating, and grading equipment manufactured at the Company’s Redmond, Oregon facility is used in many food processing and fresh vegetable packing operations.  These rotary sizing and grading technologies can remove oversized, undersized, and small irregular-shaped pieces of product from the line or separate product into predetermined size categories.  Additionally, this equipment can remove field debris, broken pieces, seeds, juice, fines, and other targeted material.

Preparation Systems.  We design and manufacture preparation systems to prepare a wide range of food products prior to cooking, freezing, canning, or other types of processing.  Equipment in this group includes air cleaners, air coolers, vegetable metering and blending systems, and bulk handling equipment.  This equipment represents our most mature product line.  Sales of these solutions over the years have formed a customer base for sales of other of our solutions and are also establishing a new customer base in developing markets.  Preparation system revenues include a variety of third-party supplied equipment and installation services, which are sold as components of larger, integrated processing lines, for which we have assumed turn-key sales responsibility.  In addition, the process systems group includes other custom designed conveying and raw food sizing, grading, and preparation equipment.  In 2010, the Company signed an agreement with ABCO Industries to sell their thermal processing equipment through our distribution channels.

Line Solutions

Integrated Solutions. Our Integrated Solutions Group (ISG) provides integrated whole-line solutions.  From pre-engineering and project definition to plant start-up, ISG offers complete turn-key solutions that can include the integration of third-party products along with Key’s sorting, conveying, and processing systems to meet the specific needs of each application.  We leverage our industry expertise and strong engineering and project management capabilities to deliver complete integration services, all from a single source.

Parts and Service

We have a large installed base of inspection and processing systems, which generates potential business for our parts, service, and training programs.  Our PROliance™ suite of support services, parts, protection plans and training solutions, provides spare parts and post-sale field and telephone-based repair services to support our customers’ routine maintenance requirements, seasonal equipment startup and winterization processes.  Our field service personnel are geographically located around the world in locations closest to customers enabling quick response time and regional technical support.  We typically provide incidental system installation support services in the sale price of select systems, principally automated inspection systems.

RemoteMD™. RemoteMD is a real-time condition and monitoring and diagnostics analysis tool for G6 optical sorters - Manta, Optyx, and Tegra - as well as G6 ADR systems, RemoteMD proactively monitors the condition of the customer’s system, assesses the status, and alerts the customer if problems are detected. By automating detection and diagnosis, RemoteMD provides detailed information to our service technicians, which increases the first-time fix-rate, reduces in-plant service calls, speeds resolution time and enhances customer productivity. We offer three distinct levels of RemoteMD services as part of our three comprehensive protection plans - SelectPRO, PlusPRO, and PremierPRO.  Each of the three protection plans is sold via annual subscription.

Online Training. This program provides customers with an interactive multimedia curriculum covering selected optical inspection systems and vibratory conveyors.  The flexible, web-based program offers a wide variety of self-paced training modules designed for operators, maintenance personnel, sanitation crews, supervisors, and others working with this equipment.  Our Online Training Program includes modules that cover ADR hardware, Optyx hardware, Tegra hardware, G6 software, Iso-Flo vibratory conveyors, and a variety of industry compliance topics.

5


Research and Development

At September 30, 2013, our research and development department had 65 employees who conduct new product research and development and sustaining engineering for released products.  Our technical staff includes electronic, optical, mechanical and software engineers, mathematicians and technical support personnel.

In fiscal 2013, our research and development expenses were approximately $9.6 million, compared to $8.3 million in fiscal 2012 and $6.9 million in fiscal 2011.

Manufacturing

We maintain manufacturing facilities in Walla Walla, Washington; Redmond, Oregon; Beusichem, The Netherlands; and Hasselt, Belgium. Our current manufacturing facilities and our product design and manufacturing processes integrate Computer Aided Engineering (CAE), Finite Element Analysis (FEA), Computer Aided Design (CAD), Computer Aided Manufacturing (CAM) and Computer Integrated Manufacturing (CIM) technologies.  Manufacturing activities include process engineering; fabrication, welding, finishing and assembly of custom designed stainless steel systems; camera and electronics assembly; subsystem assembly; and system test and integration.  The following table provides a summary of our manufacturing locations and manufacturing floor space:

Location
Manufacturing Facility
Products/Services Produced
Walla Walla, Washington
132,000 square feet
Automated Inspection Systems
Process Systems
Parts and Service
Redmond, Oregon
17,000 square feet
Process Systems
Parts and Service
Beusichem, The Netherlands
37,000 square feet
Process Systems
Automated Inspection Systems
Parts and Service
Hasselt, Belgium
13,000 square feet
Automated Inspection Systems
Parts and Service

We manufacture certain products to Underwriters Laboratories and United States Department of Agriculture standards.  Certain of our products also comply with the Canadian Standards Association (CSA), European CE (Conformité Européene) and Electronic Testing Laboratory (ETL) safety standards.  Certain products for the pharmaceutical/nutraceutical industry are FDA 21 CFR 11-compliant and designed using GAMP4 guidelines.  Our domestic facilities were recertified to the ISO 9001:2008 standard in 2011.
 
Certain components and subassemblies included in our products are obtained from limited-source or sole-source suppliers.  We attempt to ensure that adequate supplies are available to maintain manufacturing schedules.  We may also use contract or third-party manufacturers to fulfill customer needs for ancillary products or equipment that we do not manufacture. We do not have long-term contracts with any of our suppliers. We also rely on third-party domestic and foreign suppliers for certain raw materials. Several of these suppliers are the single source of the raw material. We may be adversely affected in the event that these suppliers cease operations or if pricing terms become less favorable.
  
Sales and Marketing

We market our equipment worldwide both directly and through independent sales representatives.  Sales by independent sales representatives generally account for between 20% and 30% of our consolidated net sales.  In the United States, we operate sales offices in Walla Walla, Washington and Redmond, Oregon.  Our international sales offices are: Key Technology B.V. and Visys N.V., which provide sales and service to European, Middle Eastern, Indian, and African customers; Key Technology Australia Pty Ltd., which provide sales and service to customers primarily in Australia and New Zealand; and Productos Key Mexicana S. de R.L. de C.V., which provides sales and service to customers in Mexico, and Central and South America. We supply equipment from both product groups - automated inspection systems and process systems - to customers in our primary markets through common sales and distribution channels.  In addition, we supply parts and service through our worldwide service organization.

Sales of most exports of products manufactured in the United States for shipment into international markets, other than Europe, have been denominated in U.S. dollars.  Sales of products manufactured in Europe are typically denominated in Euros.  As we expand our operations in Australia and Latin America, transactions denominated in the local currencies of these countries may

6


increase.  In connection with our export and international sales, we are subject to the risks of conducting business internationally, including unexpected changes in regulatory requirements; fluctuations in the value of the U.S. dollar, which could increase or decrease the sales prices in local currencies of our products in international markets; tariffs and other barriers and restrictions; and the requirements of complying with a variety of international laws.  Additional information regarding domestic and international sales is set forth in Note 17 to the Company’s Consolidated Financial Statements for the fiscal year ended September 30, 2013.

During fiscal 2013, 2012 and 2011, sales to McCain Foods Limited represented approximately 11%, 10%, and 11% of total net sales, respectively. During fiscal 2013, sales to ConAgra Foods, Inc. represented 11% of total net sales.  While we believe that our relationship with these customers is satisfactory, the loss of either of these customers could have a material adverse effect on our revenues and results of operations.  Each of these customers represents a group of plants under common control.  Generally, purchasing decisions for these customers are made at the individual plant level which may diversify the concentration of risk.

Backlog

Our backlog as of September 30, 2013 and September 30, 2012 was approximately $25.2 million and $30.8 million, respectively.  We schedule production based on firm customer commitments and forecasted requirements.  We include in backlog only those customer orders for which we have accepted purchase orders, or the equivalent.

Competition

The markets for automated inspection systems and process systems are highly competitive.  We experience severe price competition across almost all our product lines.  Other important competitive factors include performance, reliability, and customer support and service.  We believe that we currently compete effectively with respect to these factors, although there can be no assurance that existing or future competitors will not introduce comparable or superior products at lower prices.  Certain of our competitors may have substantially greater financial, technical, marketing and other resources.  Other companies which sell products in certain of our markets include Heat & Control, Inc. and its subsidiaries; Tomra Systems ASA and its subsidiaries, BEST N.V. and Odenberg Inc.; Sortex Ltd.; Kiremko B.V.; Meyer Industries, Inc.; KMG Systems Ltd.; VDL Industrial Products B.V.; TNA Australia Pty. Ltd.; and BMA AG.  We have encountered additional smaller competitors entering our markets, including the introduction of potentially competing tobacco sorters into the Chinese market manufactured by Chinese companies.  As we enter new markets, we expect to encounter additional new competitors.

Patents and Trademarks

We currently hold 32 United States patents on various features of our products issued from 1994 through fiscal 2013, and 15 other national patents issued by other countries.  The first of these patents will expire in fiscal 2014.  Although we consider our patents to be important to our business, we believe these expirations will not have a significant effect on us. Of the numbers above, five patents were issued in fiscal 2013.  As of December 6, 2013, 15 United States patent applications and 37 other foreign national patent applications were pending.  We have 59 registered trademarks and six pending application for trademarks.

We also attempt to protect our trade secrets and other proprietary information through proprietary information agreements and security measures with employees, consultants and others.  The laws of certain countries in which our products are or may be manufactured or sold may not protect our products and intellectual property rights to the same extent as the laws of the United States.

Employees

At September 30, 2013, we had 602 full-time employees, including 346 in manufacturing and project engineering, 65 in research and development, 143 in marketing, sales and service, and 48 in general administration and finance.  A total of 178 employees are located outside the United States.  We also utilize temporary contract employees, which improves our ability to adjust manpower in response to changing demand for our products.  Of the total number of employees at September 30, 2013, 11 were contract employees.  None of our employees in the United States are represented by a labor union.  The employees located at our facility in Beusichem, The Netherlands are represented by the Small Metal Union.  We have never experienced a work stoppage, slowdown or strike.


7


Available Information

Our annual and quarterly reports and other filings with the United States Securities and Exchange Commission (“SEC”) are made available free of charge through the Investor Relations section of our website at www.key.net as soon as reasonably practicable after we file such material with the SEC.  The information on or that can be accessed through our website is not a part of this Annual Report on Form 10-K.


8


ITEM 1A.
RISK FACTORS.

In addition to the other information in this Annual Report on Form 10-K, the following risk factors should be considered carefully in evaluating our business because such factors may have a significant effect on our operating results and financial condition.  As a result of the risk factors set forth below and the information presented elsewhere in this Annual Report on Form 10-K, actual results could differ materially from those included in any forward-looking statements.

Adverse changes in general economic conditions and disruption in financial markets may adversely affect the business of our customers and our business and results of operations.

Our business may be affected by uncertainties and general economic conditions beyond our control that may cause customers to defer or cancel new orders and sales commitments previously made. Uncertainty about the direction and relative strength of the economy in the United States and other important markets may be sufficient reason for customers to delay, defer or cancel purchase decisions, including decisions previously made. Economic difficulties in the United States and certain international markets could cause a decrease in the overall demand for our products.

Deterioration of national and global economic conditions and disruptions in credit and other financial markets could, among other things:

•
adversely affect our expansion plans, including possible acquisitions;
•
impair the financial condition of some of our customers and suppliers, thereby increasing customer bad debts or non-performance by suppliers;
•
adversely affect our ability to fund new product development necessary to meet future customer requirements;
•
negatively affect global demand for our customers' products, particularly in the food industry, which could result in underutilization of our production facilities and a reduction of sales, operating income and cash flows;
•
negatively affect our customers' ability to obtain financing, which could result in a reduction in sales, operating income and cash flows;
•
negatively affect our return on cash and cash equivalents;
•
make it more difficult or costly for us to obtain financing for our operations or investments;
•
negatively affect the results of our risk management activities if we are required to record losses related to financial instruments or experience counterparty failure;
•
require asset write-downs; or
•
impair the financial viability of our insurers.

The ongoing uncertainty and volatility in the global financial markets may adversely affect our operating results.

Our operations and performance depend on worldwide economic conditions.  Global financial markets continue to experience disruptions, including increased volatility and diminished liquidity and credit availability.  In particular, we may be affected by the continuing uncertainties associated with the debt crisis in certain countries in the European Union and the austerity measures being implemented or contemplated by various countries in Europe.  If global economic and market conditions, or economic and financial market conditions in Europe, the United States or other key markets, remain uncertain, persist, or deteriorate further, our customers may respond by suspending, delaying or reducing their capital expenditures, which may adversely affect our cash flows and results of operations.  Furthermore, our customers may experience increased difficulty in obtaining credit to finance purchases of the Company's products.  In addition, these conditions may affect the ability of our suppliers to provide goods and materials to us on a consistent and timely basis which may adversely affect our operations.

Discord, conflict, and lack of compromise within and between the executive and legislative branches of the U.S. government related to federal government budgeting, taxation policies, government expenditures, and U.S. borrowing/debt ceiling limits could adversely affect our business and operating results.

The inability of the legislative and executive branches of the U.S. government to pass in a timely manner a federal government budget, control deficit spending, address tax revenue requirements and effectively manage short and long term U.S. government borrowing, debt ratings, and debt ceiling adjustments could negatively affect U.S. domestic and global financial markets  reducing demand by our customers for our products and services.  Similarly, if our suppliers face challenges in obtaining credit, in selling their products, or otherwise in operating their businesses, they may become unable to continue to offer the materials we purchase from them to manufacture our products. The uncertainty resulting from these conflicts could result in reductions in our revenues, increased price competition, or increased operating costs, which could adversely affect our results of operations and financial condition.

9


Adverse economic conditions in the food processing industry, either globally or regionally, may adversely affect our revenues.

The markets we serve, particularly in the food processing industry, are generally experiencing variable economic conditions. Additionally, varying consumer demand due to economic conditions or dietary trends, product supply, and excess plant capacity, most notably in the potato market, could result in reduced or deferred capital equipment purchases for our product lines. While we have reacted to these developments with applications directed toward the growing fresh vegetable and fruit industries as well as the pharmaceutical and nutraceutical industries, loss of business, particularly in the potato industry, would have a negative effect on our sales and net earnings.

The loss of any of our significant customers could reduce our revenues and profitability.

We have significant, strategic customers and we anticipate that our operating results may continue to depend on these customers for the foreseeable future. The loss of any one of those customers, or a significant decrease in the volume of products they purchase from us, could adversely affect our revenues and materially adversely affect our profitability. Any difficulty in collecting outstanding amounts due from one of those customers may also harm our operating results. In addition, sales to any particular large customer may fluctuate significantly from quarter to quarter causing fluctuations in our quarterly operating results.

Significant investments in unsuccessful research and development efforts could materially adversely affect our business.

The product solutions we offer are very complex, and we need to successfully develop new products in a global competitive environment. If we fail to accurately predict and meet future customer needs and preferences, fail to incorporate critical industry-leading technologies and solutions in our products, or fail to allocate our research and development funding to products with higher customer acceptance and growth prospects, we may find we have invested heavily in the development of products that do not lead to significant revenue. Failure to successfully develop new products may also cause existing or potential customers to choose competitors' products. Any of such events may reduce future revenues and adversely affect our competitive position. Even if we successfully innovate and develop new products and product enhancements, we may incur substantial costs in doing so, and our profitability may be reduced.

Industry consolidation could increase competition in the food processing equipment industry.

The food processing equipment industry has experienced recent consolidation. Consolidation by our competitors may enhance their production capacity, technological abilities, broaden their product lines and resources, and lower their cost structure and prices, causing us to be at a competitive disadvantage. Increased competition and our ability to respond effectively to any of these changing market conditions could result in significant price erosion, reduced revenue, lower margins, and loss of market share, any of which could adversely affect our net earnings.

We are subject to price competition that may reduce our profitability.

We face price sensitivity from customers as well as aggressive pricing by our competitors, particularly in periods of excess capacity. Recent consolidation among our primary competitors may also allow these competitors to compete more effectively on price. These conditions may require us to lower prices in order to be price-competitive. In addition, because of their purchasing volume, our larger customers can influence market participants to compete on price terms. Such customers also use their buying power to negotiate lower prices. Customers are also increasing the use of integrated supply chain sourcing solutions focused solely on immediate cost savings. If we are not able to offset resulting price reductions by improving operating efficiencies and reducing expenses, such price reductions may have an adverse effect on our profit margins and net earnings.

The significance of major orders could result in significant fluctuation in quarterly operating results.

The timing of our significant orders depends on a number of factors over which we may have little or no control, including the size and complexity of a potential transaction, the level of competition that we encounter in our selling activities and our current and potential customers' internal budgeting and approval process. As a result, we may expend significant effort over a long period of time in an attempt to obtain an order, but ultimately not obtain the order, or the order ultimately received may be smaller than anticipated. Our orders from different customers vary from quarter to quarter, and a customer with a large order in one quarter may generate significantly lower orders in subsequent quarters. Due to resulting fluctuations, we believe that quarter-to-quarter comparisons of our revenue and operating results may not be meaningful, and that these comparisons may not be an accurate indicator of our future performance.


10


The failure of our independent sales representatives to perform as expected would harm our net sales.

Sales by independent sales representatives generally account for between 20% and 30% of our consolidated net sales. If our independent sales representatives fail to market, promote and sell our products adequately, our business will be adversely affected. Our independent sales representatives could reduce or discontinue sales of our products, sell competitors product lines, or they may not devote adequate resources to selling our products in the volumes and within the time frames that we expect, either of which events could adversely affect our revenues and net earnings.

We have made, or may make, acquisitions or enter into distribution agreements or similar business relationships that could disrupt our operations and harm our operating results.

We have made, or may in the future make, acquisitions of businesses, or enter into distribution agreements or similar business relationships that offer products, services, or technologies that we believe would complement our business. These changes in our business present significant challenges and risks and there can be no assurances that we will manage these changes successfully. These changes in our business involve numerous risks, including:

•
significant potential expenditures of cash, stock, and management resources;
•
difficulty achieving the potential financial and strategic benefits of the acquisition or business relationship;
•
difficulties in integrating acquired operations or products, including the potential loss of key employees from the acquired business;
•
difficulties of integrating different technologies into products and markets due to technological challenges;
•
assumption of product liabilities, including warranty costs, for third party products;
•
increased costs due to required minimum purchase levels and commitments for payments to third parties;
•
difficulties and costs associated with evaluating and integrating the information systems and internal control systems of the acquired business;
•
impairment of assets related to goodwill and other intangible assets resulting from an acquisition, and reduction in our future operating results from amortization of intangible assets;
•
diversion of management's attention from our core business, including loss of management focus on marketplace development;
•
potential difficulties in complying with foreign regulatory requirements;
•
adverse effects on existing business relationships with suppliers and customers, including the potential loss of suppliers and customers of the acquired business;
•
assumption of liabilities, known and unknown, related to the acquired business in general, and litigation and other legal process involving the acquired business in particular, including intellectual property litigation risk;
•
entering geographic areas or distribution channels in which we have limited or no prior experience; and
•
those risks related to general economic and political conditions.

There can be no assurance that attractive acquisition opportunities will be available to us, that we will be able to obtain financing for or otherwise consummate any acquisition, or that any acquisition that we do consummate will be successful.

Our international operations subject us to a number of risks that could adversely affect our revenues, operating results and growth.

We conduct business outside the United States, which subjects us to the risks inherent in international operations. In fiscal 2013, our international sales represented approximately 45% of our consolidated net sales, compared to approximately 45% of our consolidated net sales in fiscal 2012. Risks inherent in international operations include the following:

•
unexpected changes in regulatory and certification requirements;
•
restrictive governmental actions (such as restrictions on the transfer or repatriation of funds and trade protection measures, including export duties and quotas, customs duties and tariffs, or trade barriers erected by either the United States or other countries where we do business);
•
currency restrictions and exchange rate fluctuations;
•
scrutiny of foreign tax authorities which could result in significant fines, penalties and additional taxes;
•
changes in import or export licensing requirements;
•
longer payment cycles;
•
transportation delays;
•
competitive pricing that we may experience internationally;
•
challenges in implementing cost effective operating and manufacturing strategies in varied geographic regions;
•
economic downturns, civil disturbances or political instability;

11


•
geopolitical turmoil, including terrorism or war;
•
difficulties and costs of staffing and managing geographically disparate operations;
•
changes in labor standards;
•
laws and business practices favoring local companies;
•
limitations on our ability under local law to protect our intellectual property;
•
changes in domestic and foreign tax rates and laws; and
•
difficulty in obtaining sales representatives and servicing products in foreign countries, which may adversely affect sales in those countries.

The occurrence of any of the above risks could adversely affect our revenues, operating results and growth.

Fluctuations in foreign currency exchange rates could result in unanticipated losses that could adversely affect our liquidity and results of operations.

We are exposed to foreign currency exchange rate fluctuations because a portion of our revenues, expenses, assets and liabilities are denominated in foreign currencies. Changes in foreign currency exchange rates affect our results of operations and financial position. We attempt to manage certain effects of foreign currency fluctuations by entering into short-term forward exchange contracts in situations where it is both possible and practical. In these instances, these contracts are designed to minimize specific foreign currency gains or losses, as the gains or losses on the derivative are intended to offset the losses or gains on the underlying exposure. However, these contracts do not cover our full exposure and, additionally, there is no guarantee that these forward contracts will protect against the foreign exchange fluctuations in the underlying exposure. Accordingly, we could experience foreign currency gains or losses that could have a material impact on our operating results.

Advances in technology by competitors may adversely affect our sales and profitability.

The rapidly changing needs of the markets for our products demand constant innovation. Competitors may be able to adapt or develop technologies to create or enhance product offerings that directly compete with our products. Advances in technology may also remove some barriers to market entry, enabling additional competitors to enter our markets. These innovations could cause our products to become less competitive or obsolete, and decrease our sales and profits, having a material adverse effect on our business and financial condition. There can be no assurance that we will be able to continue to develop new products to compete effectively in the future.

Our existing and new products may not compete successfully in either current or new markets, which would adversely affect our sales and operating results.

Our future success and growth is dependent upon our ability to develop, manufacture, market, and sell products and services in certain food processing markets as well as to introduce new products into other existing and potential markets. There can be no assurance we can successfully and profitably penetrate these potential markets or expand into new international markets with our current or future products. There are inherent risks in developing new technologies, entering new markets, and in our existing markets including:

•
length of time and cost for development of these technologies and markets;
•
development of the technological capability to address the requirements and performance specifications of new and existing markets;
•
our ability to manufacture our products in various geographies, which may affect our success in certain emerging markets;
•
our ability to design products for ease of manufacturability and service;
•
product reliability issues related to both new technology and adapting existing products to operate in new or rugged operating environments at customer sites; and
•
failure to meet performance specifications, which could damage the profitability and the reputation of the Company and its products.

Our expansion into new markets, increasingly complex projects and applications, and integrated product offerings could increase our cost of operations and reduce gross margins and profitability.

Our growth strategy includes expansion into new product and geographic markets, complex projects and applications, and integrated product offerings to provide turnkey solutions to customers. As a result, we may encounter new types of competition and be required to develop new sales channels. Development of such markets and turnkey solutions is likely to require sustained investment, increase our cost of sales, reduce our gross margins to the extent products purchased from others are integrated into our product offerings, and result in overall reduced profitability. We are also likely to encounter technical challenges and increased

12


costs related to the integration of products from multiple vendors, adaptation and installation of products in larger and more complex plants, ensuring product performance in more difficult operating environments, and meeting unfamiliar customer requirements and performance specifications. Despite rigorous testing and quality processes, newly-developed or enhanced products or solutions may encounter challenges during or after their initial introduction or installation. We may also encounter increased warranty costs, performance issues and liability risks from products we sell but do not manufacture.

Our inability to obtain products and components from suppliers would adversely affect our ability to manufacture and market our products.

In certain instances, we depend on original equipment manufacturers and other suppliers of components included in our products for the timely delivery of our integrated turnkey products. Such suppliers may experience problems beyond our control, which may disrupt our ability to deliver our products to our customers and damage our relationships with current and future customers. These risks may include varying lead times, supplier capacity, delayed shipments, and quality control problems. In addition, supplier pricing may change and be higher than anticipated. As a result of these and other factors, our revenues and profit margins may be adversely affected.

Our information systems, computer equipment and information databases are critical to our business operations and any damage or disruptions could adversely affect our business and results of operations.

Our operations are dependent on our ability to protect our information systems, computer equipment and information databases from systems failures. Such failures could be caused by internal or external events, such as incursions by intruders or hackers, computer viruses, failures in hardware or software, power fluctuations or cyber terrorists. The failure of these systems to perform as anticipated for any reason or any significant breach of security could disrupt our business and result in numerous adverse consequences, including reduced effectiveness and efficiency of operations, increased overhead costs and loss of important information, which could have a material adverse effect on our business and results of operations.
 
Our potential inability to retain and recruit experienced management and other key personnel, or the loss of key management personnel, may adversely affect our business and prospects for growth.

Our success depends in part on the skills and experience of our employees. The loss of services of such employees could adversely affect our business until suitable replacements can be found. In addition, our headquarters are located in Walla Walla, Washington, a small, relatively remote geographic location. As such, there may be a limited number of individuals locally with the requisite skill and experience, and we have from time-to-time experienced difficulty recruiting individuals from larger metropolitan areas.

Consequently, we may not be able to retain and recruit a sufficient number of qualified individuals on acceptable terms to maintain our business or achieve planned growth. Our success also depends, to a significant degree, upon the continued individual and collective contributions of our management team. A limited number of individuals have primary responsibility for managing our business, including our relationships with key customers. These individuals are integral to our success based on their expertise and knowledge of our business and products. The loss of the services of members of the management team and other key employees for any reason could have a material adverse effect on our business.

The potential inability to protect our intellectual property, especially as we expand geographically, may adversely affect our competitive advantage.

Our competitive position may be affected by our ability to protect our proprietary technology. We have obtained certain patents and have filed a number of patent applications. We also anticipate filing applications for protection of our future products and technology. There can be no assurance that any such patents will provide meaningful protection for our product innovations, or that the issuance of a patent will give us any material advantage over our competition in connection with any of our products. We may experience additional intellectual property risks in international markets where we may lack patent protection or experience challenges to our intellectual property. The patent laws of other countries, such as China, may differ from those of the U.S. as to the patentability of our products and processes. Moreover, the degree of protection afforded by foreign patents may be different from that of U.S. patents.


13


Intellectual property-related litigation expenses and other costs resulting from infringement claims asserted against us by third parties may adversely affect our results of operations and our customer relations.

The technologies used by us may infringe the patents or proprietary technology of others, and we have been required in the past to initiate litigation to protect our patents. There is also a trend toward aggressive, strategic enforcement of intellectual property rights. As a result, there is a risk that we would be subject to infringement claims which, regardless of validity, could:

•
be expensive, time consuming and divert management attention away from normal business operations;
•
require us to pay monetary damages or enter into non-standard royalty and licensing agreements;
•
require us to modify our product sales and development plans; or
•
require us to satisfy indemnification obligations to our customers.

Regardless of whether these claims have any merit, they can be burdensome to defend or settle and can harm our business and reputation.

Our subsidiary Visys N.V. is involved in ongoing litigation that may result in an adverse outcome. Regardless of the outcome, we will be forced to expend resources as a participant in the litigation.

Our subsidiary Visys N.V. ("Visys") is subject to certain litigation due to patent infringement and other claims made by Belgian Electronics Sorting Technologies NV (“BEST”). BEST has filed several complaints since 2006 in various Belgian courts against Visys, which we acquired on February 28, 2013. Although we believe that BEST’s claims against Visys are without merit, an unfavorable decision in any litigation involving BEST could have a material adverse effect on our profitability and financial condition. We believe that the likelihood of an outcome that materially and adversely affects us is remote, but the litigation could ultimately require us to make a financial payment to BEST, or enter into license agreements with BEST. There is no guarantee that we would be able to make such payments without adversely affecting operations, or obtain license agreements with BEST on commercially reasonable terms. In the event of an unfavorable outcome, we are also entitled to receive indemnification payments under certain circumstances from the former shareholders of Visys pursuant to the acquisition agreement, but there can be no assurance that such payments would be adequate to cover all potential damages. Finally, regardless of the outcomes of the BEST proceedings, Visys may be forced to expend significant resources defending itself, potentially affecting our profitability and financial condition. The ultimate resolution of the matters involving BEST, and the associated financial effect on us, remains uncertain.

Our dependence on certain suppliers may leave us temporarily without adequate access to raw materials or products.

We also rely on third-party domestic and foreign suppliers for certain raw materials. Several of these suppliers are the single source of the raw material. We do not have long-term contracts with any supplier. We may be adversely affected in the event that these suppliers cease operations or if pricing terms become less favorable. The loss of a key vendor may force us to purchase our necessary raw materials and components in the open market, which may not be possible or may be at higher prices, until we could secure another source. There is no assurance that the terms of any subsequent supply arrangements we may enter into would be as favorable as the supply arrangements we currently have in place. If we are unable to replace a key supplier, we may face delays in delivering finished products, which could have an adverse effect on our sales, financial performance and reputation.

Our operating results are seasonal and may further fluctuate due to severe weather conditions affecting the agricultural industry in various parts of the world.

A large portion of our customer base processes agricultural products and its demand for our products and solutions fluctuates seasonally. Consequently, we generally experience lower sales and net income in our first two fiscal quarters. As a result of these seasonal and quarterly fluctuations, comparisons of our sales and operating results between different quarters within a single fiscal year may not necessarily provide meaningful comparisons.

In addition, in the event of severe weather conditions or geological events that negatively affect the production of growers, such as prolonged droughts, serious floods or earthquakes, the food processing industry may not invest in a particular year or years in new equipment in the affected locations. As a result, our revenues, results of operations and cash flows could be materially adversely affected.


14


The limited availability and possible cost fluctuations of materials used in our products could adversely affect our gross margins.

Certain basic materials, such as stainless steel, are used extensively in our product fabrication processes. Such basic materials have, in the past, been subject to worldwide shortages or price fluctuations related to the supply of or demand for raw materials, such as nickel, which are used in their production by our suppliers. A significant increase in the price or decrease in the availability of one or more of these components, subassemblies or basic materials could adversely affect our results of operations.

Compliance with recently passed health care legislation and increases in the cost of providing health care plans to our employees may adversely affect our business.

In March 2010, Congress passed the Patient Protection and Affordable Care Act and the Health Care and Education Affordability Reconciliation Act (collectively, the "Acts"). Among other things, the Acts contain provisions that will affect employer-sponsored health care plans, impose excise taxes on certain plans, and reduce the tax benefits available to employers that receive the Medicare Part D subsidy. Nationally, the cost of providing health care plans to a company's employees has increased at annual rates in excess of inflation. There continues to be uncertainty whether the Acts will increase the cost of employee health plan coverage. Continued significant annual increases in the cost of providing employee health coverage may adversely affect our business and results of operations.

Our reported results may be affected adversely by the implementation of new, or changes in the interpretation of existing, accounting principles or financial reporting requirements, which could require us to incur substantial additional expenses.

Our financial reporting complies with the Generally Accepted Accounting Principles (“GAAP”) in the United States, and GAAP is subject to change over time. If new rules or interpretations of existing rules require us to change our financial reporting (including the adoption of international financial reporting standards in the United States), our reported results of operations and financial condition could be affected substantially by the new requirements, which could include requirements to restate historical financial statements. Our management team may need to devote significant time and financial resources to comply with evolving standards, which may lead to increased general and administrative expenses and a diversion of management time and attention from revenue-generating activities to compliance activities.

Compliance with changing regulation of corporate governance and public disclosure will result in additional expenses to us and pose challenges for our management.

Changing laws, regulations and standards relating to corporate governance and public disclosure, including the Dodd-Frank Wall Street Reform and Consumer Protection Act and the rules and regulations promulgated under that act, the Sarbanes-Oxley Act and SEC regulations, have created uncertainty for public companies and significantly increased the costs and risks associated with accessing the U.S. public markets. Our management team will need to devote significant time and our financial resources to comply with both existing and evolving standards for public companies, which will lead to increased general and administrative expenses and a diversion of management time and attention from revenue-generating activities to compliance activities.


ITEM 1B.
UNRESOLVED STAFF COMMENTS

None.


15



ITEM 2.
PROPERTIES

We own or lease the following properties:

Location
Purpose
Square Feet
Owned or Leased
Lease Expires
Renewal Period
Walla Walla, Washington
Corporate office, manufacturing, research and development, sales and marketing, administration
173,000
Owned
n/a
n/a
Walla Walla, Washington
Customer Visitor Center, equipment demonstration facility
31,500
Leased
2015
Two five-year renewal periods
Redmond, Oregon
Manufacturing, research and development, sales, administration
19,000
Leased
2022
Two five-year renewal periods
Beusichem, The Netherlands
Manufacturing, sales and marketing, administration
45,000
Leased
2015
One year
Beusichem, The Netherlands
Warehouse
11,000
Leased
2015
One year
Hasselt, Belgium
Manufacturing, sales and marketing, research and development, administration
19,500
Leased
2016
Three years

We also have leased office space for sales and service and other activities in Walla Walla, Washington; Sacramento, California; Dingley, Australia; Querétaro, Mexico; and Rotselaar and Hasselt, Belgium.

We consider all of our properties suitable for the purposes for which they are used.


ITEM 3.
LEGAL PROCEEDINGS.

 On January 27, 2006, Belgian Electronics Sorting Technologies NV ("BEST") filed a complaint in the Court of First Instance in Antwerp, Belgium against our subsidiary Visys, acquired on February 28, 2013, alleging infringement of BEST's patent on a sorting apparatus with a laser detection system. BEST seeks injunctive relief, and damages and costs aggregating approximately €12,750,000. Visys has introduced certain counterclaims and commenced related proceedings in the Netherlands alleging the invalidity of the principal patent in question. In October 2012, the invalidity claim was partially granted by the Dutch court. Oral argument is now scheduled in the Belgian proceeding for February 2014, with a possible decision expected later in 2014.

In addition, on August 17, 2007, BEST started entitlement proceedings in the Court of First Instance in Antwerp related to two patents of Visys which Visys does not currently use. This case is set for trial before the Court of Appeal of Antwerp in April 2014. On June 29, 2011, BEST commenced nearly identical entitlement proceedings in the Commercial Court of Antwerp regarding a U.S. patent of Visys that is part of the same patent family as is at issue in the entitlement proceeding set for trial in the Court of Appeal. The judge in the Commercial Court has stayed these proceedings until the decision of the Court of Appeal.

Lastly, on April 30, 2008, BEST initiated proceedings against Visys for trademark infringement and unfair competition, which proceedings have been dismissed by the Court of Appeal of Antwerp. The Belgian Supreme Court confirmed this decision, except for two claims related to unfair trade practices concerning use of meta tags and a domain name. These issues were appealed and argued before the European Court of Justice in January 2013. The European Court of Justice decided the two technical legal issues before it in July 2013 and remanded the case back to the Belgian Supreme Court for further proceedings. We currently believe the financial consequences of the remaining claims are not material.

As a result of our due diligence investigation in connection with the acquisition of Visys, we believe BEST's claims against Visys are without merit, and Visys intends to pursue its defenses in these proceedings.


16


From time-to-time, the Company is named as a defendant in other legal proceedings arising out of the normal course of its business.

ITEM 4.
MINE SAFETY DISCLOSURE.

Not Applicable.


17


PART II

 
ITEM 5.
MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.

Market Information

Shares of our common stock are quoted on The NASDAQ Global Market under the symbol “KTEC”.  The following table shows the high and low sales prices per share of our common stock, as reported on NASDAQ, by quarter for the two most recent fiscal years ending September 30, 2013:

Stock price by quarter
 
High
 
Low
Fiscal year ended September 30, 2013
 
 
 
 
First Quarter
 
$
10.71

 
$
8.19

Second Quarter
 
$
13.09

 
$
10.14

Third Quarter
 
$
16.40

 
$
12.35

Fourth Quarter
 
$
15.50

 
$
12.21

 
 
 
 
 
Fiscal year ended September 30, 2012
 
 
 
 
First Quarter
 
$
15.30

 
$
10.65

Second Quarter
 
$
15.34

 
$
12.45

Third Quarter
 
$
13.97

 
$
9.49

Fourth Quarter
 
$
10.88

 
$
7.51


We had approximately 1,476 beneficial owners of its common stock, of which 135 are of record, as of December 6, 2013.

We have not historically paid dividends on our common stock.  The board of directors presently intends to continue its policy of retaining earnings for reinvestment in our operations.

Issuer Purchases of Equity Securities

The following table provides information about purchases made by us or on our behalf during the quarter ended September 30, 2013 of equity securities registered by us under Section 12 of the Securities Exchange Act of 1934.
Period
 
Total Number of Shares Purchased(1)
 
Average Price Paid per Share
 
Total Number of Shares Purchased as Part of Publicly Announced Plans or Programs
 
Maximum Number of Shares that May Yet Be Purchased Under the Plans or Programs
July 1-31, 2013
 
810

 
$
15.18

 
—
 
 
August 1-31, 2013
 
—

 
—

 
—
 
 
September 1-30, 2013
 
796

 
$
13.80

 
—
 
 
Total
 
1,606

 
$
14.50

 
—
 
429,202(2)

(1) 
Includes shares of restricted stock surrendered to satisfy tax withholding obligations by plan participants under our employee stock incentive plans. The shares were subsequently canceled.
(2) 
We initiated a new stock repurchase program effective May 30, 2012.  We were authorized to purchase up to 500,000 shares of our common stock under the program.   The timing of any repurchases and the exact number of shares of common stock to be purchased will be determined by us and will depend on market conditions and other factors. The program does not incorporate a fixed expiration date.

18



STOCK PERFORMANCE GRAPH

COMPARISON OF FIVE-YEAR CUMULATIVE TOTAL RETURN
AMONG KEY TECHNOLOGY, INC., THE RUSSELL MICROCAP INDEX, AND PEER GROUP





 
2008

2009

2010

2011

2012

2013

 
 
 
 
 
 
 
Key Technology, Inc.
100.00

47.47

54.51

47.66

40.83

58.20

 
 
 
 
 
 
 
Russell Microcap Index
100.00

92.06

98.91

94.13

128.26

169.46

 
 
 
 
 
 
 
Peer Group
100.00

80.06

83.30

83.19

84.67

130.99

 
 
 
 
 
 
 

PEER GROUP: Cognex Corporation, Perceptron, Inc., Flir Systems, Inc., John Bean Technologies Corporation, Tomra Systems, Inc., Isra Vision AG.


19


ITEM 6.
SELECTED FINANCIAL DATA.

The selected consolidated financial information set forth below for each of the five years in the period ended September 30, 2013 has been derived from our audited consolidated financial statements.  The information below should be read in conjunction with Management’s Discussion and Analysis of Financial Condition and Results of Operations and our Consolidated Financial Statements and the Notes thereto as provided in Item 7 and Item 8, respectively, of this Annual Report on Form 10-K.

 
 
Fiscal Year Ended September 30,
 
 
2013
 
2012
 
2011
 
2010
 
2009
 
 
(in thousands, except per share data)
Statement of Operations Data:
 
 
 
 
 
 
 
 
 
 
Net sales                                                 
 
$
136,783

 
$
115,174

 
$
116,328

 
$
115,804

 
$
105,450

Cost of sales                                                 
 
90,739

 
79,339

 
78,531

 
75,651

 
66,427

Gross profit                                                 
 
46,044

 
35,835

 
37,797

 
40,153

 
39,023

Operating expenses                                                 
 
40,213

 
34,867

 
35,310

 
34,896

 
39,609

Gain (loss) on disposition of assets
 
42

 
(15
)
 
4

 
77

 
(352
)
Income (loss) from operations                                                 
 
5,873

 
953

 
2,491

 
5,334

 
(938
)
Other income (expense)                                                 
 
(460
)
 
(359
)
 
(542
)
 
(172
)
 
(431
)
Earnings (loss) from continuing operations before income taxes
 
5,413

 
594

 
1,949

 
5,162

 
(1,369
)
Income tax (benefit) expense                                                 
 
1,402

 
145

 
495

 
1,524

 
(878
)
Net earnings (loss)
 
$
4,011

 
$
449

 
$
1,454

 
$
3,638

 
$
(491
)
Earnings (loss) per share
– basic
 
$
0.69

 
$
0.08

 
$
0.27

 
$
0.69

 
$
(0.10
)
 
– diluted
 
$
0.69

 
$
0.08

 
$
0.27

 
$
0.69

 
$
(0.10
)
Cash dividends per share
 
$
—

 
$
—

 
$
—

 
$
—

 
$
—

Shares used in per share calculation
– basic
 
5,836

 
5,390

 
5,311

 
5,277

 
5,116

 
– diluted
 
5,855

 
5,399

 
5,329

 
5,293

 
5,116

Balance Sheet Data:
 
 

 
 

 
 

 
 

 
 

Cash and cash equivalents and short-term investments
 
$
17,601

 
$
23,755

 
$
28,754

 
$
29,096

 
$
18,142

Working capital                                               
 
42,338

 
44,136

 
42,484

 
41,475

 
37,033

Property, plant and equipment, net.
 
17,259

 
18,370

 
19,433

 
16,821

 
16,175

Total assets                                               
 
114,624

 
86,354

 
94,405

 
91,267

 
80,715

Current portion of long-term debt
 
871

 
364

 
345

 
333

 
319

Long-term debt, less current portion
 
5,612

 
4,833

 
5,197

 
5,542

 
5,876

Shareholders' equity                                               
 
73,125

 
59,430

 
58,774

 
56,338

 
51,457




20


ITEM 7.
MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS.

Introduction

We and our wholly-owned subsidiaries design, manufacture and sell process automation systems integrating electro-optical inspection, sorting and process systems.

We own five subsidiaries:  Key Technology Holdings USA LLC; Key Technology Australia Pty Ltd.; Productos Key Mexicana S. de R. L. de C.V.; Key Technology (Shanghai) Trading Co., Ltd.; and Key Technology Asia-Pacific Pte. Ltd.  Key Technology Holdings USA LLC owns Visys N.V. and Suplusco Holding B.V., its European subsidiary, which owns Key Technology B.V.  We manufacture products in Walla Walla, Washington; Redmond, Oregon; Beusichem, The Netherlands, and Hasselt, Belgium.

Overview

Sales increased $21.6 million, or 18.8%, to $136.8 million for the year ended September 30, 2013 compared with $115.2 million for fiscal 2012, while orders increased $18.0 million, or 16.5%, in fiscal 2013 over fiscal 2012.  We reported net earnings for fiscal 2013 of $4.0 million, or $0.69 per diluted share, compared with net earnings of $449,000, or $0.08 per diluted share, for fiscal 2012.  Net earnings increased in fiscal 2013 compared to fiscal 2012 as a result of a $10.2 million increase in gross profit, offset by higher operating expenses of $40.2 million, or 29.4% of net sales, compared to $34.9 million, or 30.3% of net sales, for fiscal 2012.  The increase in gross margins to 33.7% in fiscal 2013 from 31.1% in fiscal 2012 was due to a higher mix of higher margin automated system sales and the product mix within automated inspection systems, and more efficient factory utilization, partially offset by higher warranty and customer support costs due in part to the increase in net sales and $1.0 million of acquisition related fair value adjustments to acquired inventory.  Operating expenses increased $5.3 million, or 15.3%, in fiscal 2013 as compared to fiscal 2012 due to the acquisition of Visys, the results of which have been included since the acquisition date, February 28, 2013, higher commissions due to the increase in net sales; increased research and development expenses related to developing new technology solutions; and the increased expenses associated with amortization of intangible assets.  Other expenses were $460,000 in fiscal year 2013 compared to $359,000 in fiscal year 2012.  

Automated inspection systems sales increased 27%, process systems sales were up 13%, and parts and service sales increased 13% in fiscal 2013 compared to the prior fiscal year.  Orders for automated inspection systems increased 48%, process system orders decreased 7%, and parts and service orders increased 15% in fiscal 2013 compared to the prior fiscal year. Export and international sales for the fiscal years ended September 30, 2013, 2012 and 2011 accounted for 45%, 45% and 41% of net sales in each year, respectively.

While the Company produced significantly improved operating results in fiscal 2013, our major business still serves seasonal and cyclical industries, and it remains typical for order and backlog quantities to vary on a quarter-by-quarter basis. While we have recently seen a softening in the European region, we remain positive regarding our overall international opportunities.

Our acquisition of Visys, completed on February 28, 2013, was a critical component of our long-term strategy. Visys has brought new technology, expertise and chute-fed solutions that complement our existing product portfolio. The Visys products have enabled us to add nuts and dried fruit as a new core market as well as expand our available product offerings and solutions in the processed fruit and vegetables and potato markets. The Visys team, now fully integrated within Key, adds capabilities and skill sets that augment our already talented and experienced team.

In fiscal 2013, we focused on our five strategic imperatives, which will continue in fiscal 2014. Those five strategic imperatives are as follows:

1.
Developing and introducing new technology-leading platforms and solutions;
2.
Increasing global market share in our core markets through new products, focused regional sales strategies, and leveraging our integrated solutions capability;
3.
Expanding into new high-potential market adjacencies by leveraging new product platforms;
4.
Continuing to strengthen and develop internal capabilities and third-party partnerships necessary for industry-leading solutions; and
5.
Further strengthening a winning culture within Key Technology, driving our "innovation architecture."


21


Acquisition

Effective February 28, 2013, we completed the acquisition of Visys NV ("Visys"), a Belgian supplier of high-end digital sensor-based optical sorters. We acquired 100% of the outstanding shares of Visys for approximately $21.3 million, consisting of $13.2 million in cash, 600,000 shares of our common stock and warrants to purchase 250,000 shares of our common stock. Visys has been included in our operating results for the period from the date of acquisition. Further information regarding the acquisition of Visys is contained in Footnote 2 to our Consolidated Financial Statements as of September 30, 2013.

License and Distribution Agreements

In July 2013, we entered into an exclusive license agreement with EVK Di Kerschhaggl GmbH and Insort GmbH to deploy chemical imaging technology for potato processing applications and to integrate new hyperspectral developments into our automated inspection systems, and an exclusive distribution agreement to market Insort's complementary sorting solutions exclusively in North America and to strategic specified customers worldwide. These partnerships are expected to enhance our ability to offer high-performance digital sorting technologies in the potato industry, and facilitate our development of next-generation hyperspectral sorters for a variety of food processing applications.

Application of Critical Accounting Policies

We have identified our critical accounting policies, the application of which may materially affect our financial statements, either because of the significance of the financial statement item to which they relate, or because they require management judgment to make estimates and assumptions in measuring, at a specific point in time, events which will be settled in the future.  The critical accounting policies, judgments and estimates which management believes have the most significant effect on the financial statements are set forth below:

•
Revenue recognition
•
Allowances for doubtful accounts
•
Valuation of inventories
•
Long-lived assets
•
Allowances for warranties
•
Accounting for income taxes

Management has discussed the development, selection and related disclosures of these critical accounting estimates with the audit committee of our board of directors.

Revenue Recognition.  We recognize revenue when persuasive evidence of an arrangement exists, delivery has occurred or services have been provided, the sale price is fixed or determinable, and collectability is reasonably assured.  Additionally, we sell our goods on terms which transfer title and risk of loss at a specified location, typically shipping point, port of loading or port of discharge, depending on the final destination of the goods.  Accordingly, revenue recognition from product sales occurs when all criteria are met, including transfer of title and risk of loss, which occurs either upon shipment by us or upon receipt by customers at the location specified in the terms of sale.  Sales of system upgrades are recognized as revenue upon completion of the conversion of the customer’s existing system when this conversion occurs at the customer site.  Certain other, less frequent, equipment sales are recognized as revenue upon completion of installation at the customer site. Revenue earned from services (maintenance, installation support, and repairs) is recognized ratably over the contractual period or as the services are performed.  If any contract provides for both equipment and services (multiple deliverables), the sales price is allocated to the various elements based on the relative selling price.  Each element is then evaluated for revenue recognition based on the previously described criteria.  We typically have a very limited number of contracts with multiple deliverables and they are not material to the financial statements.  Our sales arrangements provide for no other significant post-shipment obligations.  If all conditions of revenue recognition are not met, we defer revenue recognition.  In the event of revenue deferral, the sale value is not recorded as revenue to us, accounts receivable are reduced by any related amounts owed by the customer, and the cost of the goods or services deferred is carried in inventory.  In addition, we periodically evaluate whether an allowance for sales returns is necessary.  Historically, we have experienced few sales returns.  We account for cash consideration (such as sales incentives) that are given to customers or resellers as a reduction of revenue rather than as an operating expense unless an identified benefit is received for which fair value can be reasonably estimated.  We believe that revenue recognition is a “critical accounting estimate” because our terms of sale vary significantly, and management exercises judgment in determining whether to recognize or defer revenue based on those terms.  Such judgments may materially affect net sales for any period.  Management exercises judgment within the parameters of accounting principles generally accepted in the United States of America (GAAP) in determining when contractual obligations are met, title and risk of loss are transferred, the sales price is fixed or determinable and collectability is reasonably assured.  At

22


September 30, 2013, we had invoiced $4.0 million, compared to $2.4 million at September 30, 2012, for which we have not recognized revenue.

Allowances for doubtful accounts.  We have established allowances for doubtful accounts for specifically identified, as well as anticipated, doubtful accounts based on credit profiles of customers, current economic trends, contractual terms and conditions, and customers’ historical payment patterns.  Factors that affect collectability of receivables include general economic or political factors in certain countries that affect the ability of customers to meet current obligations.  We actively manage our credit risk by utilizing an independent credit rating and reporting service, by requiring certain percentages of down payments, and by requiring secured forms of payment for customers with uncertain credit profiles or located in certain countries.  Forms of secured payment could include irrevocable letters of credit, bank guarantees, third-party leasing arrangements or EX-IM Bank guarantees, each utilizing Uniform Commercial Code filings, or the like, with governmental entities where possible.  We believe that the accounting estimate related to allowances for doubtful accounts is a “critical accounting estimate” because it requires management judgment in making assumptions relative to customer or general economic factors that are outside our control.  As of September 30, 2013, the balance sheet included allowances for doubtful accounts of $296,000 as compared to $190,000 at September 30, 2012.  Amounts charged to bad debt expense for fiscal 2013 and 2012 were $2,000 and $24,000, respectively.  Actual charges to the allowance for doubtful accounts for fiscal 2013 and 2012 were $26,000 and $84,000, respectively.  If we experience actual bad debt expense in excess of estimates, or if estimates are adversely adjusted in future periods, the carrying value of accounts receivable would decrease and charges for bad debts would increase, resulting in decreased net earnings.

Valuation of inventories.  Inventories are stated at the lower of cost or market. Our inventory includes purchased raw materials, manufactured components, purchased components, service and repair parts, work in process, finished goods and demonstration equipment.  Write downs for excess and obsolete inventories are made after periodic evaluation of historical sales, current economic trends, forecasted sales, estimated product lifecycles and estimated inventory levels.  The factors that contribute to inventory valuation risks are our purchasing practices, electronic component obsolescence, accuracy of sales and production forecasts, introduction of new products, product lifecycles and the associated product support.  We actively manage our exposure to inventory valuation risks by maintaining low safety stocks and minimum purchase lots, utilizing just in time purchasing practices, managing product end-of-life issues brought on by aging components or new product introductions, and by utilizing inventory minimization strategies such as vendor-managed inventories.  We believe that the accounting estimate related to valuation of inventories is a “critical accounting estimate” because it is susceptible to changes from period-to-period due to the requirement for management to make estimates relative to each of the underlying factors ranging from purchasing to sales to production to after-sale support.  At September 30, 2013, cumulative inventory adjustments to lower of cost or market totaled $3.5 million compared to $2.6 million as of September 30, 2012.  Amounts charged to expense to record inventory at lower of cost or market for fiscal 2013 and 2012 were $1.7 million and $1.6 million, respectively.  Actual charges to the cumulative inventory adjustments upon disposition or sale of inventory were $867,000 and $826,000 for fiscal 2013 and 2012, respectively.  If actual demand, market conditions or product lifecycles are adversely different from those estimated by management, inventory adjustments to lower market values would result in a reduction to the carrying value of inventory, an increase in inventory write-offs, and a decrease to gross margins.

Long-lived assets.  We regularly review all of our long-lived assets, including property, plant and equipment, and amortizable intangible assets, for impairment whenever events or changes in circumstances indicate that the carrying value may not be recoverable.  If the total of projected future undiscounted cash flows is less than the carrying amount of these assets, an impairment loss based on the excess of the carrying amount over the fair value of the assets is recorded.  In addition, goodwill is reviewed based on its fair value at least annually.  As of September 30, 2013, we held $40.1 million of long-lived assets, net of depreciation and amortization.  There were no material changes in our long-lived assets that would result in an adjustment of the carrying value for these assets.  Estimates of future cash flows arising from the utilization of these long-lived assets and estimated useful lives associated with the assets are critical to the assessment of recoverability and fair values. We believe that the accounting estimate related to long-lived assets is a “critical accounting estimate” because:  (1) it is susceptible to change from period-to-period due to the requirement for management to make assumptions about future sales and cost of sales generated throughout the lives of several product lines over extended periods of time, future results of operations, and market multiples used in valuation models; and (2) the potential effect that recognizing an impairment could have on the assets reported on our balance sheet and the potential material adverse effect on reported earnings or loss.  Changes in these estimates could result in a determination of asset impairment, which would result in a reduction to the carrying value and a reduction to net earnings in the affected period.

Allowances for warranties.  Our products are covered by standard warranty plans included in the price of the products ranging from 90 days to five years, depending upon the product and contractual terms of sale.  The majority of the warranty periods are for one year or less.  We establish allowances for warranties for specifically identified, as well as anticipated, warranty claims based on contractual terms, product conditions and actual warranty experience by product line.  Our products include both manufactured and purchased components and, therefore, warranty plans include third-party sourced parts which may not be covered by the third-party manufacturer’s warranty.  We actively manage our quality program by using a structured product introduction plan, process monitoring techniques utilizing statistical process controls, vendor quality metrics, and feedback loops to

23


communicate warranty claims to designers and engineers for remediation in future production.  We believe that the accounting estimate related to allowances for warranties is a “critical accounting estimate” because:  (1) it is susceptible to significant fluctuation period-to-period due to the requirement for management to make assumptions about future warranty claims relative to potential unknown issues arising in both existing and new products, which assumptions are derived from historical trends of known or resolved issues; and (2) risks associated with third-party supplied components being manufactured using processes that we do not control.  As of September 30, 2013, the balance sheet included warranty reserves of $2.7 million, while $4.2 million of warranty charges were incurred during the fiscal year then ended, compared to warranty reserves of $2.0 million as of September 30, 2012 and warranty charges of $3.6 million for the fiscal year then ended.  If our actual warranty costs are higher than estimates, future warranty plan coverages are different, or estimates are adversely adjusted in future periods, reserves for warranty expense would need to increase, warranty expense would increase and gross margins would decrease.

Accounting for income taxes.  Our provision for income taxes and the determination of the resulting deferred tax assets and liabilities involves a significant amount of management judgment.  The quarterly provision for income taxes is based partially upon estimates of pre-tax financial accounting income for the full year and is affected by various differences between financial accounting income and taxable income.  Judgment is also applied in determining whether the deferred tax assets will be realized in full or in part.  In management’s judgment, when it is more likely than not that all or some portion of specific deferred tax assets will not be realized, a valuation allowance must be established for the amount of the deferred tax assets that are determined not to be realizable.  At September 30, 2013, we had valuation reserves of approximately $180,000 for deferred tax assets for capital loss carryforwards and changes in the carrying value of our investment in Proditec, and offsetting amounts for foreign deferred tax assets and U.S. deferred tax liabilities, primarily related to net operating loss carry forwards in the foreign jurisdictions that we believe will not be utilized during the carryforward periods. During fiscal 2013, we recorded net additional valuation reserves of $2,000 related to capital loss carryforwards and $3,000 as part of the acquisition of Visys related to net operating loss carryforwards. In addition, we reversed offsetting amounts of approximately $135,000 of valuation reserves for foreign deferred tax assets and U.S. deferred tax liabilities related to the utilization of net operating loss carryforwards in Europe in fiscal 2013. As these were offsetting amounts, these changes had no effect on net earnings. During fiscal 2012, we recorded net additional valuation reserves of $5,000 related to capital loss carryforwards. In addition, we recorded offsetting amounts of approximately $2.5 million of valuation reserves for foreign deferred tax assets and U.S. deferred tax liabilities related to net operating loss carryforwards in foreign jurisdictions that we believe will not be utilized during the carryforward periods. We also reversed offsetting amounts of approximately $700,000 of valuation reserves for Chinese deferred tax assets and U.S. deferred tax liabilities related to net operating loss carry forwards that were utilized in the foreign jurisdiction. As these were all offsetting amounts, these changes had no effect on net earnings.  During fiscal 2011, we recorded $160,000 of valuation reserves related to net operating loss carryforwards in foreign jurisdictions offset by U.S. deferred tax liabilities and reversed $17,000 of valuation reserves for capital loss carryforwards that were utilized to offset capital gains on our corporate income tax return.  There were no other valuation allowances at September 30, 2013 due to anticipated utilization of all the deferred tax assets as we believe we will have sufficient taxable income to utilize these assets.  We maintain reserves for estimated tax exposures in jurisdictions of operation.  These tax jurisdictions include federal, state and various international tax jurisdictions.  Potential income tax exposures include potential challenges of various tax credits and deductions, and issues specific to state and local tax jurisdictions.  Exposures are typically settled primarily through audits within these tax jurisdictions, but can also be affected by changes in applicable tax law or other factors, which could cause our management to believe a revision of past estimates is appropriate.  At September 30, 2013, we had reserves of $126,000 for estimated tax exposures.  During fiscal 2013 and 2012, there were no significant changes in these estimates.  Management believes that an appropriate liability has been established for estimated exposures; however, actual results may differ materially from these estimates.  We believe that the accounting estimate related to income taxes is a “critical accounting estimate” because it relies on significant management judgment in making assumptions relative to temporary and permanent timing differences of tax effects, estimates of future earnings, prospective application of changing tax laws in multiple jurisdictions, and the resulting ability to utilize tax assets at those future dates.  If our operating results were to fall short of expectations, thereby affecting the likelihood of realizing the deferred tax assets, judgment would have to be applied to determine the amount of the valuation allowance required to be included in the financial statements in any given period.  Establishing or increasing a valuation allowance would reduce the carrying value of the deferred tax asset, increase tax expense and reduce net earnings.

In fiscal 2013, the existing research and development tax credit was retroactively renewed and extended to December 31, 2013.  Due to this change in tax law, the Company recorded approximately $192,000 of additional research and development credits in fiscal 2013 related to research and development expenditures incurred during fiscal 2012. The research and development credit was effective for the Company for only the first fiscal quarter of 2012 prior to its expiration date. Similarly, in fiscal 2011, an additional $72,000 of research and development credits were recorded which related to R&D expenditures in fiscal 2010.   The research and development credit expires December 31, 2013 and, as of the date of this report, has not been renewed.  


24


Comparison of Fiscal 2013 to Fiscal 2012
 
 
 
 
 
 
 
 
 
 
Fiscal Year Ended September 30,
 
 
2013
 
2012
 
Change $
 
Change %
 
 
(in thousands)
Statement of Operations Data
 
 
 
 
 
 
 
 
Net sales
 
$
136,783

 
$
115,174

 
$
21,609

 
18.8

Gross profit
 
46,044

 
35,835

 
10,209

 
28.5

Operating Expenses:
 
 

 
 

 
 

 
 

Sales and marketing
 
18,976

 
17,439

 
1,537

 
8.8

Research and development
 
9,647

 
8,343

 
1,304

 
15.6

General and administrative
 
10,594

 
9,070

 
1,524

 
16.8

Amortization
 
996

 
15

 
981

 
N/M*

Total operating expense
 
40,213

 
34,867

 
5,346

 
15.3

Gain (loss) on disposition of assets
 
42

 
(15
)
 
57

 
N/M*

Income from operations
 
5,873

 
953

 
4,920

 
516.3

Other income (expense)
 
(460
)
 
(359
)
 
(101
)
 
28.1

Income tax expense
 
1,402

 
145

 
1,257

 
866.9

Net earnings
 
$
4,011

 
$
449

 
3,562

 
793.3

Balance Sheet Data
 
 

 
 

 
 

 
 

Cash and cash equivalents
 
$
17,601

 
$
23,755

 
(6,154
)
 
(25.9
)
Accounts receivable
 
17,725

 
11,426

 
6,299

 
55.1

Inventories
 
27,921

 
23,166

 
4,755

 
20.5

Other Data (unaudited)
 
 

 
 

 
 

 
 

Orders for year ended September 30
 
126,930

 
108,976

 
17,954

 
16.5

Backlog at fiscal year end
 
25,231

 
30,810

 
(5,579
)
 
(18.1
)
* Not Meaningful
 
 
 
 
 
 
 
 

Results of Operations

Fiscal 2013 compared to Fiscal 2012

Net sales for the year ended September 30, 2013 were $136.8 million, a 19% increase from the $115.2 million reported for fiscal 2012. International sales for fiscal 2013 were 45% of net sales and 45% in the corresponding prior year period. The increase in net sales occurred most significantly in North America and Europe, partially offset by decreases in net sales in Latin America.  Sales in our automated inspection systems product line increased by 27% to $59.3 million in fiscal 2013, accounting for 43% of total revenues, compared to $46.6 million in fiscal 2012, or 40% of total revenues. The increase in automated inspection system sales was principally in the potato market, as well as other food markets, offset by decreases in the processed fruit and vegetable and fresh cut markets. The increase in automated inspection system sales occurred in the ADR, Tegra, VEO, Verisym and upgrade product lines, partially offset by decreases in Optyx, Raptor, Manta and tobacco sorter product lines.  Process systems sales in fiscal 2013 were $50.7 million a 13% increase from the $44.9 million reported for fiscal 2012.  Sales of process systems accounted for 37% of total revenues in fiscal 2013 compared to 39% in fiscal 2012.  The increase in process systems sales related primarily to vibratory products in Europe and other process system equipment, partially offset by a decrease in rotary sizing and grading systems and third-party equipment. Parts and service sales increased from the prior year by $3.1 million or 13% to $26.7 million compared to $23.6 million in fiscal 2012.  Parts and service sales represented 20% of sales in fiscal 2013 and 21% in fiscal 2012.

Orders increased 16%, or $17.9 million, to $126.9 million in fiscal 2013 from the $109.0 million of new orders received in fiscal 2012.  Backlog at September 30, 2013 decreased 18% to $25.2 million compared to the $30.8 million reported at the end of fiscal 2012.  The order mix for the more recent year changed from fiscal 2012.  For fiscal 2013, our higher margin automated inspection systems orders increased by $18.0 million, or 48%, representing 44% of order volume in fiscal 2013 compared to 34% in the prior year. This increase occurred in almost all automated product inspection lines, except for Optyx and ADR systems.  Automated inspection system orders increased in fiscal 2013 across most major markets, and most significantly in the potato market, and principally in the North American region. Orders for process systems decreased by $3.4 million, or 7%, and

25


represented 35% of order volume in fiscal 2013 compared to 44% in the prior year.  The decrease in orders for process systems occurred primarily in vibratory, rotary sizers and graders, and third-party equipment product lines, partially offset by increases in vibratory products in Europe and other process system equipment. Parts and service orders increased from the prior year by $3.4 million, or 15%, and represented 21% and 22% of orders in fiscal 2013 and fiscal 2012, respectively. Orders increased most significantly in the North American region, particularly in the potato market.

Automated inspection systems backlog was $14.2 million at the end of fiscal 2013, essentially the same as a year ago. The backlog for automatic inspection systems increased in the Manta, Tegra, tobacco sorter and Visys product lines offset by decreases in the ADR, Optyx and Raptor product lines. Backlog for process systems was down $6.0 million, or 39%, to $9.3 million at the end of fiscal 2013 compared to $15.3 million at the same time a year ago. The decrease in the backlog for process systems was primarily driven by a decrease in vibratory products, third-party equipment, and vibratory equipment in Europe. Backlog by product line at September 30, 2013 was 56% automated inspection systems, 37% process systems, and 7% parts and service, compared to 46% automated inspection systems, 50% process systems, and 4% parts and service at September 30, 2012.

Gross profit increased to $46.0 million for fiscal 2013 compared to $35.8 million in fiscal 2012, or 33.7% and 31.1% of net sales, respectively.  The principal reasons for the increase in the gross profit margin percentage were a higher mix of higher margin automated inspection system sales and the product mix within automated inspection systems and more efficient factory utilization, partially offset by higher warranty and customer support costs due in part to the increase in net sales and $1.0 million of acquisition related fair market value adjustments to acquired inventory. Gross margins are expected to be significantly lower in the first quarter of fiscal 2014 as compared to the first quarter of fiscal 2013, and gross margin percentages for the first quarter of fiscal 2014 are expected to be adversely affected by unfavorable plant utilization.

Research and development expense increased $1.3 million to $9.6 million, or 7.1% of sales, in fiscal 2013 from $8.3 million, or 7.2% of sales, in fiscal 2012.  In fiscal 2013, there was an increase in expenses related to developing new technology solutions, as well as the inclusion of the research and development expense of Visys since the acquisition date.

Sales and marketing expense in fiscal 2013 increased to $19.0 million compared to $17.4 million spent in fiscal 2012.  As a percentage of sales, sales expense decreased to 13.9% of sales in fiscal 2013 from 15.1% of sales in fiscal 2012.  The primary reasons for the sales and marketing expense increase in spending were increased net sales, higher commissions due to the increase in net sales, the inclusion of the sales and marketing expenses of Visys since the acquisition date, and increased sales incentive compensation.

General and administrative expense in fiscal 2013 was $10.6 million or 7.7% of sales for the year, compared to $9.1 million or 7.9% of sales for fiscal 2012.  The primary reason for the increase in spending were the inclusion of Visys since the acquisition date, $785,000 of acquisition related expenses, and incentive compensation expenses.

Operating expenses for the first quarter of fiscal 2014 are anticipated to decrease modestly as compared to the fourth quarter of fiscal 2013.

Other income and expense was an expense of $460,000 for fiscal 2013 compared to $359,000 of expense for fiscal 2012.  In fiscal 2013, we recognized foreign exchange losses of $146,000, net of the effects of forward contracts settled during the year, compared with exchange gains of $183,000 in fiscal 2012. In fiscal 2012, we recorded $209,000 of expense related to accumulated foreign currency translation adjustments reclassified from other comprehensive income to the results of operations.

The effective tax rate for the Company was a tax expense rate of 25.9% in fiscal 2013 compared to a tax expense rate of 24.4% in fiscal 2012. The effective tax rate in fiscal 2013 was favorably affected by the domestic production deduction and the research and development tax credit offset by other permanent deductions.  The effective tax rate for fiscal 2013 was affected by the research and development credits recorded in fiscal 2013, including $192,000 of additional research and development tax credits related to fiscal 2012 recorded in fiscal 2013 due to changes in tax law during fiscal 2013 to retroactively renew the research and development tax credit. The ratios were also affected by the relative size of individual items compared to net earnings for fiscal 2013, which was significantly higher than net earnings in fiscal 2012.   

Net earnings in fiscal 2013 were $4.0 million, or $0.69 per diluted share, compared to net earnings of $0.4 million, or $0.08 per diluted share, in fiscal 2012.  The principal reasons for the increase in earnings for fiscal 2013 compared to fiscal 2012 were higher net sales and gross profit margins, partially offset by higher operating expenses. As a result of our lower fourth quarter ending backlog and anticipated shipment schedule, the Company expects that the results of operations will be significantly lower in the first quarter of fiscal 2014 than in the first quarter of fiscal 2013.


26


Fiscal 2012 compared to Fiscal 2011

Net sales for the year ended September 30, 2012 were $115.2 million, a 1.0% decrease from the $116.3 million reported for fiscal 2011. International sales for fiscal 2012 were 45% of net sales compared to 43% in the corresponding prior year period. The decrease in net sales in North America and Europe was partially offset by increases in net sales in Latin America and the Asia Pacific regions.  Sales in our automated inspection systems product line decreased by 12% to $46.6 million in fiscal 2012, accounting for 40% of total revenues, compared to $53.0 million in fiscal 2011, or 46% of total revenues. The decrease in automated inspection system sales was due to a slow period for new capital investments, particularly in the potato market, as well as the effects of product competition. The decrease in automated inspection system sales was across most major product lines with the exception of the recently released VEO system and Manta product lines.   Process systems sales in fiscal 2012 were $44.9 million, a 10% increase from the $40.7 million reported for fiscal 2011.  Sales of process systems accounted for 39% of total revenues in fiscal 2012 compared to 35% in fiscal 2011.  The increase in process systems sales related primarily to vibratory products, rotary sizing and grading systems and third-party equipment, partially offset by a decrease in vibratory product sales in Europe. Parts and service sales increased from the prior year by $1 million or 4% to $23.6 million, compared to $22.7 million in fiscal 2011.  Parts and service sales represented 21% of sales in fiscal 2012 and 19% in fiscal 2011.

Orders decreased 7%, or $7.9 million, to $109.0 million in fiscal 2012 from the $116.8 million of new orders received in fiscal 2011.  Backlog at September 30, 2012 decreased 15% to $30.8 million compared to the $36.2 million reported at the end of fiscal 2011.  The order mix for the more recent year changed from fiscal 2011.  For fiscal 2012, our higher margin automated inspection systems orders decreased by $14.0 million, or 27%, representing 34% of order volume in fiscal 2012 compared to 44% in the prior year. This decrease occurred in almost all automated product inspection lines, except for VEO and ADR systems.  Automated inspection system orders decreased in fiscal 2012 in the processed fruit and vegetable market as fiscal 2011 included the final year of a significant three year contract with a major North American processor as well as due to the effects of product competition. Orders for process systems increased by $5.3 million, or 13%, representing 44% of order volume in fiscal 2012 compared to 36% in the prior year.  The increase in orders for process systems occurred primarily in vibratory, rotary sizers and graders, and third-party equipment product lines offset by decreases in most other product lines. Parts and service orders increased from the prior year by $835,000, or 4%, and represented 22% and 20% of orders in fiscal 2012 and fiscal 2011, respectively. Orders increased in Europe and Latin America offset by decreases in North America and the Asia-Pacific region. Order increases in the potato market were offset by decreases in processed fruit and vegetable, fresh cut and other industries. Automated inspection systems backlog decreased by $8.8 million, or 38%, to $14.2 million at the end of fiscal 2012 compared to $23.0 million at the same time a year ago. The backlog decrease for automatic inspection systems was across almost all product lines. Backlog for process systems was up $3.2 million, or 27%, to $15.3 million at the end of fiscal 2012 compared to $12.1 million at the same time a year ago. The increase in the backlog for process systems was primarily driven by an increase in vibratory products, rotary sizers and graders, and vibratory equipment in Europe, partially offset by a decrease in fresh cut products. Backlog by product line at September 30, 2012 was 46% automated inspection systems, 50% process systems, and 4% parts and service, compared to 64% automated inspection systems, 33% process systems, and 3% parts and service at September 30, 2011.

Gross profit decreased to $35.8 million for fiscal 2012 compared to $37.8 million in fiscal 2011, or 31.1% and 32.5% of net sales, respectively.  The principal reasons for the $2.0 million decrease in gross profit were a higher mix of lower margin process system sales and the product mix within automated inspection systems, continued price competition, partially offset by lower warranty and customer support costs and the effect of cost reduction initiatives.  Our growth strategy related to integrated product offerings may reduce the gross margin percentages in future periods to the extent products purchased from others are integrated into our product offerings.

Research and development expense increased $1.4 million to $8.3 million, or 7.2% of sales, in fiscal 2012 from $6.9 million, or 6.0% of sales, in fiscal 2011.  In fiscal 2012, there was an increase in expenses related to strategic initiatives for developing new technology solutions for the marketplace.

Sales and marketing expense in fiscal 2012 decreased to $17.4 million compared to $19.5 million spent in fiscal 2011.  As a percentage of sales, sales expense decreased to 15.1% of sales in fiscal 2012 from 16.7% of sales in fiscal 2011.  The primary reasons for the decrease in spending were lower internal sales and marketing personnel related costs due to cost reduction initiatives, decreased trade show and promotional costs, and lower commissions due to the decrease in net sales.

General and administrative expense in fiscal 2012 was $9.1 million and 7.9% of sales for the year, compared to $8.9 million and 7.6% of sales for fiscal 2011.  The primary reason for the increase in spending was higher expenses associated with severance and other separation charges partially offset by lower personnel costs due to cost reduction initiatives.

Other income and expense was an expense of $359,000 for fiscal 2012 compared to $542,000 of expense for fiscal 2011.  In fiscal 2012, we recognized foreign exchange gains of $183,000, net of the effects of forward contracts settled during the year,

27


compared with exchange losses of $82,000 in fiscal 2011. We recorded $209,000 of expense related to accumulated foreign currency translation adjustments reclassified from other comprehensive income to the results of operations. Other expenses were also partially offset by $51,000 in royalty income received in fiscal 2012 and lower bank charges incurred in fiscal 2012.

The effective tax rate for the Company was a tax expense rate of 24.4% in fiscal 2012 compared to a tax expense rate of 25.4% in fiscal 2011. The effective tax rate in fiscal 2012 was favorably affected by the domestic production deduction and the R&D tax credit offset by other permanent deductions such as the limitation on meals and entertainment deductions. The ratios were also affected by the relative size of individual items compared to net earnings for fiscal 2012, which was significantly lower than net earnings in fiscal 2011.  The effective tax rate for fiscal 2011 was primarily affected by the research and development credits recorded in fiscal 2011, including $72,000 of additional R&D tax credits related to fiscal 2010 recorded in fiscal 2011 due to changes in tax law during fiscal 2011 to retroactively renew the R&D tax credit.  

Net earnings in fiscal 2012 were $449,000, or $0.08 per diluted share, compared to net earnings of $1.5 million, or $0.27 per diluted share, in fiscal 2011.  The principal reasons for the decrease in earnings for fiscal 2012 compared to fiscal 2011 were lower net sales and gross profit margins, increased research and development expenses, partially offset by lower sales expenses and favorable changes in the components of other income and expense.

Liquidity and Capital Resources

Fiscal 2013

For fiscal 2013, net cash decreased by $6.2 million to $17.6 million on September 30, 2013 compared to $23.8 million on September 30, 2012.  We generated $8.8 million in cash from operating activities, used $14.0 million in investing activities and consumed $1.0 million in financing activities.

The net cash provided by operating activities during fiscal 2013 of $8.8 million included net earnings for the year of $4.0 million, non-cash expenses for depreciation and amortization of $4.9 million, non-cash share-based payments of $1.3 million, offset by increases of $3.4 million in deferred taxes due to the timing of deductions for tax purposes.  Non-cash working capital at September 30, 2013 decreased from the same time last year, providing $2.0 million of cash. The major changes in current assets and liabilities in fiscal 2013 that were sources of cash were a $3.7 million reduction of inventory due to lower backlog and inventory requirements, and a $3.7 million increase in accrued payroll liabilities due to the timing of payroll and timing of payments for increased commissions and increased sales and other incentive compensation, and a $0.9 million increase in customer support and warranty costs accrued due to the increase in net sales. These sources of cash were partially offset by increases in accounts receivable of $5.5 million due to the timing of shipments during the last fiscal quarter of 2013 and related timing of collections, decreases in customer deposits of $1.1 million related to the decreased backlog at fiscal year end, the timing of orders received in the last fiscal quarter of 2013 and related timing of customer down payments received. The changes in working capital in fiscal 2013 reflects normal variations in our operations.

Cash used in investing activities totaled $14.0 million during fiscal 2013, which primarily consisted of $13.2 million of cash used for the acquisition of Visys, net of cash of $1.6 million acquired in the transaction, and capital expenditures of $2.5 million.  Capital expenditures were primarily for manufacturing equipment, leasehold improvements, and information systems software and equipment.

Cash used in financing activities totaled $1.0 million in fiscal 2013, which included payments on long-term debt of $697,000 associated with our mortgage on our headquarters facility, $240,000 for exchanges of shares for statutory tax withholding, and $30,000 of cash used for repurchases of our common stock, offset by $95,000 of proceeds from the issuance of common stock for option exercises and employee stock purchases.

Our domestic credit facility provides for a variable-rate revolving credit line of up to $15 million and a credit sub-facility of $6 million for standby letters of credit of which up to €3.0 million ($4.1 million) is available to our Netherlands facility.  The credit facility matures on September 30, 2014.  The credit facility bears interest, at our option, at either the bank’s prime rate or the British Bankers Association LIBOR Rate (“BBA LIBOR”) using a tiered structure depending upon our achievement of a specified financial ratio.  Our prime rate option will be either the bank’s prime rate or prime less 0.25% per annum.  Our BBA LIBOR option will be either BBA LIBOR plus 1.75% or 1.50% per annum.  At September 30, 2013, the interest rate would have been 1.68% based on the lowest of the available alternative rates.  The credit facility is secured by all U.S. accounts receivable, inventory and equipment and fixtures.  The loan agreement also provided for a 15-year term loan in the amount of $6.4 million of which $4.8 million was outstanding at September 30, 2013.  The term loan provided for a mortgage on our Avery Street headquarters’ land and building located in Walla Walla, Washington.  The term loan bears interest at the BBA LIBOR rate plus 1.40% and matures on January 2, 2024.  We have also simultaneously entered into an interest rate swap agreement with the lender

28


to fix the interest rate at 4.27%.  The credit facilities contain covenants which require operating within a funded debt to EBITDA ratio, a fixed charge coverage ratio and minimum working capital levels.  The loan agreement permits capital expenditures up to a certain level, and contains customary default and acceleration provisions.  The credit facilities also restrict acquisitions, incurrence of additional indebtedness and lease expenditures above certain levels without the prior consent of the lender. In fiscal 2013, the relevant loan agreement was amended to permit the acquisition of Visys.  At September 30, 2013, we had no borrowings outstanding under the credit facility and $548.000 in standby letters of credit.  At September 30, 2013, we were in compliance with our loan covenants.  At September 30, 2012, we had no borrowings outstanding under the credit facility and $250,000 in standby letters of credit.

Our credit accommodation with a commercial bank in the Netherlands provides a credit facility for our European subsidiary.  This credit accommodation totals €1.75 million ($2.4 million) and includes an operating line of the lesser of €250,000 ($338,000) or the available borrowing base, which is based on varying percentages of eligible accounts receivable and inventories, and a bank guarantee facility of €1.5 million ($2 million).  The operating line and bank guarantee facility are secured by all of the subsidiary’s personal property.  The credit facility bears interest at the bank’s prime rate, with a minimum of 3.00%, plus 1.75%.  At September 30, 2013, the interest rate was 5.95%.  The credit accommodation contains a covenant which requires the maintenance of minimum tangible net worth levels at the subsidiary.  At September 30, 2013, we were in compliance with our loan covenants.  At September 30, 2013, we had no borrowings under this facility and had received bank guarantees of €502,000 ($679,000) under the bank guarantee facility.  The credit facility allows overages on the bank guarantee facility.  Any overages reduce the available borrowings under the operating line.  At September 30, 2012, we had no borrowings under this facility and had received bank guarantees of €152,000 ($196,000).

Our Belgian subsidiary's credit accommodation with a commercial bank in Belgium provides a credit facility for our Belgian subsidiary. This credit accommodation totals €2.7 million ($3.7 million) and includes an operating line of €800,000 ($1.1 million), a bank guarantee facility of €500,000 ($0.7 million), and loan agreement provisions of €1.4 million ($1.9 million). The operating line and bank guarantee facility are secured by all of the subsidiary's current assets. The Belgian operating line bears interest at the bank's prime rate, plus 1.25%. At September 30, 2013, the interest rate was 9.75%. At September 30, 2013, the subsidiary had no borrowings under the operating line. At September 30, 2013, the subsidiary had various loans outstanding under the loan agreement provision totaling €1.1 million ($1.5 million). The fixed interest rates on these loans ranged from 2.91% to 3.98%. The loans mature between February 2014 and November 2017. The credit accommodation contains a covenant which requires the maintenance of a minimum tangible net worth and debt to EBITDA ratio levels at the subsidiary measured as of December 31 of each fiscal year. At December 31, 2012, the subsidiary was in compliance with the tangible net worth covenant. At June 30, 2013, the subsidiary had no bank guarantees under the bank guarantee facility. Additionally, the subsidiary had a subordinated loan with another European lender of €130,000 ($176,000). The loan has a fixed interest rate of 4.99% and matures in March 2016.

We anticipate that current cash balances, ongoing cash flows from operations and borrowing capacity under currently available operating credit lines will be sufficient to fund our operating needs for the foreseeable future.  Cash used for operating activities was $8.8 million in fiscal 2013, and cash provided by (used in) operating activities was $(1.3) million and $5.8 million in fiscal years 2012 and 2011, respectively.  We had no material commitments for capital expenditures at September 30, 2013.

Prior Years - Fiscal 2012 and 2011

For fiscal 2012, net cash decreased by $5.0 million to $23.8 million on September 30, 2012 compared to September 30, 2011.  We used $1.1 million in cash from operating activities, used $2.6 million in investing activities and consumed $1.3 million in financing activities.

The net cash used by operating activities during fiscal 2012 of $1.1 million included net earnings for the year of $449,000, non-cash expenses for depreciation and amortization of $3.7 million, non-cash share-based payments of $1.2 million, and increases of $73,000 in deferred taxes.  Non-cash working capital at September 30, 2012 decreased from the same time last year, resulting in the use of $6.4 million of cash. The major changes in current assets and liabilities in fiscal 2012 were increases in accounts receivable of $2.7 million due to the timing of shipments during the last fiscal quarter of 2012 and related timing of collections, decreases in customer deposits of $5.5 million related to the decreased backlog at fiscal year end, the timing of orders received in the last fiscal quarter of 2012 and related timing of customer down payments received, and reductions in accounts payable of $706,000 due to reduced purchases as a result of the lower backlog and current inventory levels. These uses of cash were partially offset by a $887,000 reduction of inventory due to the lower backlog and inventory requirements, reductions of $880,000 of income taxes receivable related to net cash refunded during the period due to net operating loss carrybacks and $1.1 million reduction in prepaid expenses and other assets due to reduced vendor deposits and VAT receivables. The changes in working capital in fiscal 2012 reflects normal variations in our operations.


29


Cash used in investing activities totaled $2.6 million during fiscal 2012, which primarily consisted of capital expenditures of $2.6 million.  Capital expenditures were primarily for manufacturing equipment and information systems software and equipment.

Cash used in financing activities totaled $1.3 million in fiscal 2012, which included payments on long-term debt of $345,000 associated with our mortgage on our headquarters facility, $205,000 for exchanges of shares for statutory tax withholding, and $710,000 of cash used for repurchases of our common stock, offset by $94,000 of proceeds from the issuance of common stock for option exercises and employee stock purchases.

For fiscal 2011, net cash decreased by $342,000, or 1%, to $28.8 million on September 30, 2011 compared to September 30, 2010.  We provided $5.8 million in cash from operating activities, used $5.5 million in investing activities and consumed $588,000 in financing activities.

The net cash provided by operating activities during fiscal 2011 of $5.8 million included net earnings for the year of $1.5 million, non-cash expenses for depreciation and amortization of $2.9 million, non-cash share-based payments of $1.4 million, and increases of $1.7 million in deferred taxes.  Non-cash working capital at September 30, 2011 increased from the same time last year, resulting in $1.5 million of cash used in operating activities. Decreases in trade receivables and accounts payable due to lower sales in the fourth quarter compared to the prior year, and increases in customer deposits due to a higher backlog and timing of customer payments and shipments, were offset by increases in inventory due to delayed customer shipments, increases in income tax receivables, and decreases in accrued payroll and other liabilities.

Cash used in investing activities totaled $5.5 million during fiscal 2011, which primarily consisted of capital expenditures of $5.6 million.  Capital expenditures included costs associated with our new Innovation Center, corporate headquarters facility repairs, manufacturing equipment, and information systems software and equipment.

Cash used in financing activities totaled $588,000 in fiscal 2011, which included payments on long-term debt of $333,000 associated with our mortgage on our headquarters facility, and $416,000 for exchanges of shares for statutory withholding, offset by $147,000 of proceeds from the issuance of common stock for option exercises and employee stock purchases.

Contractual Obligations

Our continuing contractual obligations and commercial commitments existing on September 30, 2013 are as follows:

 
 
 
 
Payments due by period (in thousands)
Contractual Obligations(1)
 
Total
 
Less than 1 year
 
1 – 3 years
 
4 – 5 years
 
After 5 years
Long-term debt
 
$
6,483

 
$
871

 
$
1,652

 
$
1,197

 
$
2,763

Interest on long-term debt (2)
 
1,301

 
264

 
420

 
283

 
334

Operating leases
 
3,970

 
1,162

 
1,239

 
569

 
1,000

Purchase obligations(3)
 
2,148

 
2,148

 
—

 
—

 
—

Total contractual cash obligations
 
$
13,902

 
$
4,445

 
$
3,311

 
$
2,049

 
$
4,097


(1) 
We also have $126,000 of contractual obligations related to uncertain tax positions for which the timing and amount of payment cannot be reasonably estimated due to the nature of the uncertainties and the unpredictability of jurisdictional examinations in relation to the statute of limitations.

(2) 
Includes the effect of the interest-rate swap agreement that fixes the interest rate at 4.27%.

(3) 
Purchase obligations are commitments to purchase certain materials and supplies which will be used in the ordinary course of business.

At September 30, 2013, we had standby letters of credit totaling $1.2 million, which includes secured bank guarantees under our domestic and European credit facilities and domestic letters of credit securing certain self-insurance contracts.  If we fail to meet our contractual obligations, these bank guarantees and letters of credit may become liabilities of the Company.  We have no off-balance sheet arrangements or transactions, or arrangements or relationships with “special purpose entities.”


30


ITEM 7A.
QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.

Foreign Currency Exchange Risk.  We have assessed our exposure to market risks for our financial instruments and have determined that our exposures to such risks are generally limited to those affected by the value of the U.S. dollar compared to the Euro and to a lesser extent the Australian dollar, Mexican peso, and Singapore dollar.

The terms of sales to European customers are typically denominated in Euros.  We expect that our standard terms of sale to international customers, other than those in Europe, will continue to be denominated in U.S. dollars, although as we expand our operations in Australia and Latin America, transactions denominated in the local currencies of these countries may increase.  As of September 30, 2013, management estimates that a 10% change in foreign exchange rates would affect net earnings before taxes by approximately $38,000 on an annual basis as a result of the conversion to U.S. dollars of cash, accounts receivable, loans to foreign subsidiaries, and sales or other contracts denominated in foreign currencies.  These changes would positively affect net earnings if the U.S. dollar weakens on world markets and negatively affect net earnings if the U.S. dollar strengthens on world markets. We assess our currency exchange risk and may enter into forward contracts to minimize such risk.  At September 30, 2013, we held a 30-day forward contract for €2.0 million ($2.7 million).

As of September 30, 2013, the Euro gained approximately 5% in value against the U.S. dollar compared to its value at September 30, 2012.  During the twelve-month period ended September 30, 2013, changes in the value of the Euro against the U.S. dollar ranged between a 5% gain and a 1% loss as compared to the value at September 30, 2012.  Most other relevant foreign currencies lost in value against the U.S. dollar during fiscal 2013.  The effect of these fluctuations on our operations and financial results in fiscal 2013 were:

•
Translation adjustments of $587,000, net of income tax, were recognized as a component of comprehensive income as a result of converting the Euro denominated balance sheets of Key Technology B.V. and Suplusco Holding B.V. and Visys N.V. into U.S. dollars, and to a lesser extent, the Australian dollar balance sheets of Key Technology Australia Pty Ltd., the Peso balance sheet of Productos Key Mexicana, and the Singapore dollar balance sheet of Key Technology Asia-Pacific Pte. Ltd.

•
Foreign exchange losses of $146,000, net of the effects of forward contracts settled during the year, were recognized in the other income and expense section of the consolidated statement of operations as a result of conversion of Euro and other foreign currency denominated receivables, intercompany loans, and cash carried on the balance sheet of the U.S. operations, as well as the result of the conversion of other non-functional currency receivables, payables and cash carried on the balance sheets of the European, Australian, Singapore and Mexican operations.

When the U.S. dollar weakens on the world markets, our market and economic outlook for international sales could be favorably affected as products sold to international customers become relatively less expensive to those customers.  Conversely, a relatively stronger U.S. dollar makes our U.S.-manufactured goods more expensive to international customers when denominated in U.S. dollars or potentially less profitable to us when denominated in a foreign currency.  On the other hand, materials or components imported into the U.S. may be less expensive.  Our Netherlands-based subsidiary transacts business primarily in Euros and does not have significant exports to the U.S, but does import a significant portion of its products from its U.S.-based parent company. Our Belgian-based subsidiary also transacts business primarily in Euros and is expected to have significant exports to the U.S.-based parent Company.

Interest Rate Risk.  Under our domestic credit facilities, we may borrow at either (a) the lender’s prime rate or prime less 25 basis points or (b) at BBA LIBOR plus 175 or 150 basis points depending on our achievement of a specified financial ratio.  Our Netherlands subsidiary may borrow on our Netherlands credit facility at the lenders prime rate plus 175 basis points. Our Belgian subsidiary may borrow on our Belgian credit facility at the lender's prime rate plus 1.25%.  At September 30, 2013, we had no borrowings under these arrangements.  During the year ended September 30, 2013, interest rates applicable to these variable rate credit facilities ranged from 1.68% to 9.75%.  At September 30, 2013, the rate was 1.68% on its domestic credit facility and 5.95% on our Netherlands credit facility and 9.75% on our Belgian credit facility based on the lowest of the available alternative rates.  Our mortgage on our headquarters facility bears interest at the BBA LIBOR plus 140 basis points, but we simultaneously entered into an interest rate swap agreement with the lender to fix the interest rate a 4.27%. Long-term fixed borrowings at our Belgian subsidiary bear interest rates ranging from 2.91% to 4.99%.  As of September 30, 2013, management estimate that a 100 basis point change in these interest rates would not affect net income before taxes because we had no borrowings outstanding under our variable interest rate credit facilities and the interest rate swap effectively converts our variable rate mortgage to a fixed rate mortgage.

31


ITEM 8.
FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA.

Title
Page

Report of Independent Registered Public Accounting Firm
33

Report of Independent Registered Public Accounting Firm
34

Consolidated Balance Sheets at September 30, 2013 and 2012
35

Consolidated Statements of Operations for the three years ended September 30, 2013
37

Consolidated Statements of Comprehensive Income for the three years ended September 30, 2013
38

Consolidated Statements of Shareholders' Equity for the three years ended September 30, 2013
39

Consolidated Statements of Cash Flows for the three years ended September 30, 2013
40

Notes to Consolidated Financial Statements
42

Supplementary Data
62


32



REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM


Board of Directors and Shareholders
Key Technology, Inc.

We have audited the accompanying consolidated balance sheets of Key Technology, Inc. (an Oregon corporation) and subsidiaries (the “Company”) as of September 30, 2013 and 2012, and the related consolidated statements of operations, statements of comprehensive income, changes in shareholders’ equity, and cash flows for each of the three years in the period ended September 30, 2013. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Key Technology, Inc. and subsidiaries as of September 30, 2013 and 2012, and the results of their operations and their cash flows for each of the three years in the period ended September 30, 2013 in conformity with accounting principles generally accepted in the United States of America.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company’s internal control over financial reporting as of September 30, 2013, based on criteria established in Internal Control-Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated December 13, 2013 expressed an unqualified opinion.


/s/ GRANT THORNTON LLP

Seattle, Washington
December 13, 2013


33



REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
 
Board of Directors and Shareholders
Key Technology, Inc.
We have audited the internal control over financial reporting of Key Technology, Inc. and subsidiaries’ (the “Company”) as of September 30, 2013, based on criteria established in Internal Control-Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Annual Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of September 30, 2013, based on criteria established in Internal Control-Integrated Framework (1992) issued by COSO.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated financial statements of the Company as of and for the year ended September 30, 2013, and our report dated December 13, 2013, expressed an unqualified opinion on these consolidated financial statements.

/s/ GRANT THORNTON LLP

Seattle, Washington
December 13, 2013


34


KEY TECHNOLOGY, INC. AND SUBSIDIARIES
 
 
 
 
CONSOLIDATED BALANCE SHEETS
 
 
 
 
SEPTEMBER 30, 2013 AND 2012
 
 
 
 
(In thousands)
 
 
 
 
 
 
2013
 
2012
ASSETS
 
 
 
 
CURRENT ASSETS:
 
 
 
 
Cash and cash equivalents
 
$
17,601

 
$
23,755

Trade accounts receivable, net of allowance for doubtful accounts of $296 and $190,
 
17,725

 
11,426

respectively
 
 
 
 
Inventories
 
27,921

 
23,166

Deferred income taxes
 
5,034

 
2,854

Income tax receivable
 
86

 
327

Prepaid expenses and other assets
 
4,206

 
2,665

Total current assets
 
72,573

 
64,193

PROPERTY, PLANT AND EQUIPMENT, Net
 
17,259

 
18,370

DEFERRED INCOME TAXES
 
760

 
—

INTANGIBLES, Net
 
10,982

 
36

INVESTMENT IN PRODITEC
 
1,148

 
1,153

GOODWILL
 
11,821

 
2,524

OTHER ASSETS
 
81

 
79

TOTAL
 
$
114,624

 
$
86,355

See notes to consolidated financial statements.
 
 
 
(Continued)


35


KEY TECHNOLOGY, INC. AND SUBSIDIARIES
 
 
 
 
CONSOLIDATED BALANCE SHEETS
 
 
 
 
SEPTEMBER 30, 2013 AND 2012
 
 
 
 
(In thousands, except shares)
 
 
 
 
 
 
2013
 
2012
LIABILITIES AND SHAREHOLDERS' EQUITY
 
 
 
 
CURRENT LIABILITIES:
 
 
 
 
Accounts payable
 
$
6,669

 
$
4,550

Accrued payroll liabilities and commissions
 
9,440

 
5,194

Customers' deposits
 
6,048

 
5,213

Accrued customer support and warranty costs
 
3,301

 
2,263

Income tax payable
 
430

 
2

Current portion of long-term debt
 
871

 
364

Customer purchase plans
 
1,731

 
956

Other accrued liabilities
 
1,745

 
1,515

Total current liabilities
 
30,235

 
20,057

LONG-TERM DEBT
 
5,612

 
4,833

DEFERRED INCOME TAXES
 
5,226

 
1,434

OTHER LONG TERM LIABILITIES
 
426

 
601

COMMITMENTS AND CONTINGENCIES
 


 


SHAREHOLDERS' EQUITY:
 
 
 
 
Preferred stock-no par value; 5,000,000 shares authorized; none issued and outstanding
 
—

 
—

Common stock-no par value; 45,000,000 shares authorized; 6,168,654 and 5,312,145 issued and outstanding at September 30, 2013 and 2012, respectively
 
30,086

 
21,806

Warrants, no par value; 250,000 issued and outstanding at September 30, 2013
 
665

 
—

Retained earnings
 
41,677

 
37,682

Accumulated other comprehensive income (loss)
 
697

 
(58
)
Total shareholders' equity
 
73,125

 
59,430

TOTAL
 
$
114,624

 
$
86,355

See notes to consolidated financial statements.
 
 
 
(Concluded)


36


KEY TECHNOLOGY, INC. AND SUBSIDIARIES
 
 
 
 
 
 
CONSOLIDATED STATEMENTS OF OPERATIONS
 
 
 
 
 
 
THREE YEARS ENDED SEPTEMBER 30, 2013
 
 
 
 
 
 
(In thousands, except per share data)
 
 
 
 
 
 
 
 
2013
 
2012
 
2011
NET SALES
 
$
136,783

 
$
115,174

 
$
116,328

COST OF SALES
 
90,739

 
79,339

 
78,531

Gross profit
 
46,044

 
35,835

 
37,797

OPERATING EXPENSES:
 
 
 
 
 
 
Sales and marketing
 
18,976

 
17,439

 
19,474

Research and development
 
9,647

 
8,343

 
6,939

General and administrative
 
10,594

 
9,070

 
8,882

Amortization of intangibles
 
996

 
15

 
15

Total operating expenses
 
40,213

 
34,867

 
35,310

GAIN (LOSS) ON DISPOSITION OF ASSETS
 
42

 
(15
)
 
4

INCOME FROM OPERATIONS
 
5,873

 
953

 
2,491

OTHER INCOME (EXPENSE):
 
 
 
 
 
 
Royalty income
 
52

 
51

 
—

Interest income
 
27

 
22

 
20

Interest expense
 
(277
)
 
(264
)
 
(261
)
Reclassification from Other comprehensive income
 
—

 
(209
)
 
—

Foreign exchange gain (loss)
 
(146
)
 
183

 
(82
)
Other, net
 
(116
)
 
(142
)
 
(219
)
Total other income (expense)-net
 
(460
)
 
(359
)
 
(542
)
Earnings before income taxes
 
5,413

 
594

 
1,949

Income tax expense
 
1,402

 
145

 
495

Net earnings
 
$
4,011

 
$
449

 
$
1,454

EARNINGS PER SHARE - Basic
 
$
0.69

 
$
0.08

 
$
0.27

EARNINGS PER SHARE - Diluted
 
$
0.69

 
$
0.08

 
$
0.27

SHARES USED IN PER SHARE CALCULATION - Basic
 
5,836

 
5,390

 
5,311

SHARES USED IN PER SHARE CALCULATION - Diluted
 
5,855

 
5,399

 
5,329

See notes to consolidated financial statements.
 
 
 
 
 
 

37



KEY TECHNOLOGY, INC. AND SUBSIDIARIES
 
 
 
 
 
 
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
 
 
 
 
 
 
THREE YEARS ENDED SEPTEMBER 30, 2013
 
 
 
 
 
 
(Dollars in thousands)
 
 
 
 
 
 
 









2013

2012

2011



Net earnings

$
4,011


$
449


$
1,454

Other comprehensive income (loss):






Foreign currency translation adjustment

890


(202
)

(108
)
Unrealized changes in fair value of derivatives

254


(102
)

(120
)
Reclassification adjustment for foreign currency translation included in net earnings

—


209


—

Income tax (expense) benefit related to items of comprehensive income (loss)

(389
)

32


78

Total comprehensive income

$
4,766


$
386


$
1,304








See notes to consolidated financial statements.
 
 
 
 
 
 


38


KEY TECHNOLOGY, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF SHAREHOLDERS' EQUITY
THREE YEARS ENDED SEPTEMBER 30, 2013
(Dollars in thousands)
 
 
Common Stock
 
 
 
 
 
 
 
 
 
 
Shares
 
Amount
 
Warrants
 
Retained Earnings
 
Accumulated Other Comprehensive Income (Loss)
 
Total
Balance at September 30, 2010
 
5,297,312

 
$
20,006

 
$
—

 
$
36,177

 
$
155

 
$
56,338

Net earnings
 
—

 
—

 
—

 
1,454

 
—

 
1,454

Comprehensive income - foreign currency translation adjustment, net of tax benefit of $37
 
—

 
—

 
—

 
—

 
(71
)
 
(71
)
Unrealized changes in value of derivatives, net of tax benefit of $41
 
—

 
—

 
—

 
—

 
(79
)
 
(79
)
Tax benefits from share-based payments
 
—

 
14

 
—

 
—

 
—

 
14

Share based payments
 
—

 
1,387

 
—

 
—

 
—

 
1,387

Issuance of stock upon exercise of stock options
 
5,000

 
40

 
—

 
—

 
—

 
40

Issuance of stock for Employee Stock Purchase Plan
 
8,269

 
107

 
—

 
—

 
—

 
107

Stock grants - performance-based
 
60,212

 
—

 
—

 
—

 
—

 
—

Stock grants - employment-based
 
53,470

 
—

 
—

 
—

 
—

 
—

Restricted stock surrendered in payment of taxes
 
(26,919
)
 
(416
)
 
—

 
—

 
—

 
(416
)
Stock forfeitures and retirements
 
(60,094
)
 
—

 
—

 
—

 
—

 
—

Balance at September 30, 2011
 
5,337,250

 
21,138

 
—

 
37,631

 
5

 
58,774

Net earnings
 
—

 
—

 
—

 
449

 
—

 
449

Comprehensive income - foreign currency translation adjustment, net of tax benefit of $69
 
—

 
—

 
—

 
—

 
(133
)
 
(133
)
Reclassification adjustment for foreign currency translation included in net earnings, net of tax of $71

—


—


—


—


138


138

Unrealized changes in value of derivatives, net of tax benefit of $34
 
—

 
—

 
—

 
—

 
(68
)
 
(68
)
Tax benefits from share-based payments
 
—

 
(103
)
 
—

 
—

 
—

 
(103
)
Share based payments
 
—

 
1,194

 
—

 
—

 
—

 
1,194

Issuance of stock upon exercise of stock options
 
9,056

 
13

 
—

 
—

 
—

 
13

Issuance of stock for Employee Stock Purchase Plan
 
8,417

 
81

 
—

 
—

 
—

 
81

Stock buyback
 
(70,853
)
 
(312
)
 
—

 
(398
)
 
 
 
(710
)
Stock grants - performance-based
 
92,910

 
—

 
—

 
—

 
—

 
—

Stock grants - employment-based
 
95,805

 
—

 
—

 
—

 
—

 
—

Restricted stock surrendered in payment of taxes
 
(19,127
)
 
(205
)
 
—

 
—

 
—

 
(205
)
Stock forfeitures and retirements
 
(141,313
)
 
—

 
—

 
—

 
—

 
—

Balance at September 30, 2012
 
5,312,145

 
21,806

 
—

 
37,682

 
(58
)
 
59,430

Net earnings
 
—

 
—

 
—

 
4,011

 

 
4,011

Comprehensive income - foreign currency translation adjustment, net of tax expense of $303
 
—

 
—

 
—

 
—

 
587

 
587

Unrealized changes in value of derivatives, net of tax expense of $86
 
—

 
—

 
—

 
—

 
168

 
168

Tax benefits from share-based payments
 
—

 
(60
)
 
—

 
—

 
—

 
(60
)
Share based payments
 
—

 
1,298

 
—

 
—

 
—

 
1,298

Issuance of stock upon exercise of stock options
 
10,000

 
28

 
—

 
—

 
—

 
28

Issuance of stock for Employee Stock Purchase Plan
 
6,257

 
67

 
—

 
—

 
—

 
67

Issuance of stock for acquisition, net of issuance costs of $126

600,000


7,201


—


—


—


7,201

Issuance of warrants (250,000) for acquisition, net of issuance costs of $62

—


—


665


—


—


665

Stock buyback
 
(3,288
)
 
(14
)
 
—

 
(16
)
 
—

 
(30
)
Stock grants - performance-based
 
178,163

 
—

 
—

 
—

 
—

 
—

Stock grants - employment-based
 
103,026

 
—

 
—

 
—

 
—

 
—

Restricted stock surrendered in payment of taxes
 
(24,187
)
 
(240
)
 
—

 
—

 
—

 
(240
)
Stock forfeitures and retirements
 
(13,462
)
 
—

 
—

 
—

 
—

 
—

Balance at September 30, 2013
 
6,168,654

 
$
30,086

 
$
665

 
$
41,677

 
$
697

 
$
73,125

See notes to consolidated financial statements.
 
 
 
 
 
 
 
 
 
 
 
 

39



KEY TECHNOLOGY, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
THREE YEARS ENDED SEPTEMBER 30, 2013
 
 
 
 
 
 
(In thousands)
 
 
 
 
 
 
 
 
2013
 
2012
 
2011
CASH FLOWS FROM OPERATING ACTIVITIES:
 
 
 
 
 
 
Net earnings
 
$
4,011

 
$
449

 
$
1,454

Adjustments to reconcile net earnings to net cash provided by (used in) operating activities:
 
 

 
 

 
 
Reclassification from Other comprehensive income
 
—

 
209

 
—

(Gain) loss on disposition of assets
 
(42
)
 
15

 
(4
)
Foreign currency exchange (gain) loss
 
146

 
(183
)
 
82

Depreciation and amortization
 
4,868

 
3,654

 
2,944

Share based payments
 
1,276

 
1,182

 
1,407

Excess tax benefit from share based payments
 
(40
)
 
(55
)
 
(76
)
Deferred income taxes
 
(3,421
)
 
(73
)
 
1,674

Deferred rent
 
(5
)
 
(33
)
 
(66
)
Bad debt expense
 
2

 
24

 
(126
)
Changes in assets and liabilities:
 
 

 
 

 
 
Trade accounts receivable
 
(5,511
)
 
(2,671
)
 
4,351

Inventories
 
3,665

 
887

 
(3,463
)
Prepaid expenses and other current assets
 
(628
)
 
1,124

 
(233
)
Income taxes receivable
 
241

 
880

 
(1,016
)
Patents

(135
)

—

 
—

Accounts payable
 
(123
)
 
(706
)
 
(1,155
)
Accrued payroll liabilities and commissions
 
3,698

 
(221
)
 
(1,078
)
Accrued customer support and warranty costs
 
863

 
(459
)
 
367

Income taxes payable
 
367

 
70

 
(620
)
Other accrued liabilities
 
556

 
137

 
(1,284
)
Customers' deposits
 
(1,090
)
 
(5,505
)
 
2,614

Other
 
71

 
13

 
(22
)
Cash provided by (used in) operating activities
 
8,769

 
(1,262
)
 
5,750

CASH FLOWS FROM INVESTING ACTIVITIES:
 
 

 
 

 
 
Proceeds from sale of property
 
77

 
8

 
42

Purchases of property, plant, and equipment
 
(2,468
)
 
(2,600
)
 
(5,588
)
Cash paid for the acquisition of Visys, net of cash acquired
 
(11,607
)

—


—

Cash used in investing activities
 
(13,998
)
 
(2,592
)
 
(5,546
)
See notes to consolidated financial statements.
 
 
 
(Continued)
 

40


KEY TECHNOLOGY, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
 
 
 
 
 
 
THREE YEARS ENDED SEPTEMBER 30, 2013
 
 
 
 
 
 
(In thousands)
 
 
 
 
 
 
 
 
2013
 
2012
 
2011
CASH FLOWS FROM FINANCING ACTIVITIES:
 
 

 
 

 
 
Payments on long-term debt
 
(697
)
 
(345
)
 
(333
)
Proceeds from issuance of common stock
 
95

 
94

 
147

Stock buyback
 
(30
)
 
(710
)
 
—

Issuance costs of stock and warrants

(188
)

—

 
—

Excess tax benefits from share based payments
 
40

 
55

 
76

Exchange of shares for statutory withholding
 
(240
)
 
(205
)
 
(416
)
Cash used in financing activities
 
(1,020
)
 
(1,111
)
 
(526
)
EFFECT OF EXCHANGE RATE CHANGES ON CASH
 
95

 
(34
)
 
(20
)
NET DECREASE IN CASH AND CASH EQUIVALENTS
 
(6,154
)
 
(4,999
)
 
(342
)
CASH AND CASH EQUIVALENTS, BEGINNING OF YEAR
 
23,755

 
28,754

 
29,096

CASH AND CASH EQUIVALENTS, END OF YEAR
 
$
17,601

 
$
23,755

 
$
28,754

SUPPLEMENTAL DISCLOSURES OF CASH FLOW
 
 

 
 

 
 
INFORMATION:
 
 

 
 

 
 
Cash paid during the period for interest
 
$
275

 
$
278

 
$
264

Cash paid (refunded) during the period for income taxes
 
$
4,179

 
$
(705
)
 
$
481

 
 
 
 
 
 
 
SUPPLEMENTAL DISCLOSURE OF NONCASH
 
 
 
 
 
 
         FINANCING ACTIVITIES:
 
 
 
 
 
 
Common stock issued for acquisition

$
7,325


$
—

 
$
—

Warrants issued for acquisition

$
727


$
—

 
$
—

 
 
 
 
 
 
 
See notes to consolidated financial statements.
 
 
 
 
 
(Concluded)





41


KEY TECHNOLOGY, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
THREE YEARS ENDED SEPTEMBER 30, 2013
1.
THE COMPANY AND SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES
 
Key Technology, Inc. and its wholly-owned subsidiaries (the “Company”) design, manufacture, sell and service process automation systems that integrate electro-optical inspection and sorting systems with process systems that include specialized conveying and product preparation equipment.  The consolidated financial statements include the accounts of Key Technology, Inc. and its wholly-owned subsidiaries:  Key Technology Holdings USA LLC; Productos Key Mexicana S. de R. L. de C.V.; Key Technology (Shanghai) Trading Co. Ltd.; Key Technology Asia-Pacific Pte. Ltd.; and Key Technology Australia Pty Ltd.  Suplusco Holding B.V. is a wholly-owned European subsidiary of Key Technology Holdings USA LLC that includes the accounts of Key Technology B.V. and Visys N.V.  All significant intercompany accounts and transactions have been eliminated.
 
Revenue Recognition—The Company recognizes revenue when persuasive evidence of an arrangement exists, delivery has occurred or services have been provided, the sale price is fixed or determinable, and collectability is reasonably assured.  Additionally, the Company sells its goods on terms which transfer title and risk of loss at a specified location, typically shipping point, port of loading or port of discharge, depending on the final destination of the goods.  Accordingly, revenue recognition from product sales occurs when all criteria are met, including transfer of title and risk of loss, which occurs either upon shipment by the Company or upon receipt by customers at the location specified in the terms of sale.  Sales of system upgrades are recognized as revenue upon completion of the conversion of the customer’s existing system when this conversion occurs at the customer site.  Certain other, less frequent, equipment sales are recognized as revenue upon completion of installation at the customer site. Revenue earned from services (maintenance, installation support, and repairs) is recognized ratably over the contractual period or as the services are performed.  If any contract provides for both equipment and services (multiple deliverables), the sales price is allocated to the various elements based on the relative selling price.  Each element is then evaluated for revenue recognition based on the previously described criteria.  The Company typically has a very limited number of contracts with multiple deliverables and they are not material to the financial statements.  The Company’s sales arrangements provide for no other significant post-shipment obligations.  If all conditions of revenue recognition are not met, the Company defers revenue recognition.  In the event of revenue deferral, the sale value is not recorded as revenue to the Company, accounts receivable are reduced by any related amounts owed by the customer, and the cost of the goods or services deferred is carried in inventory.  In addition, the Company periodically evaluates whether an allowance for sales returns is necessary.  Historically, the Company has experienced few sales returns.  If the Company believes there are potential sales returns, the Company would provide any necessary provision against sales.  The Company accounts for cash consideration (such as sales incentives) that are given to customers or resellers as a reduction of revenue rather than as an operating expense unless an identified benefit is received for which fair value can be reasonably estimated.  Upon receipt of an order, the Company generally receives a deposit which is recorded as customers’ deposits.  The Company makes periodic evaluations of the creditworthiness of its customers and generally does not require collateral.  An allowance for credit losses is provided based upon historical experience and anticipated losses.  The Company records revenues net of any taxes, such as sales tax, which are passed through to the customer.
 
Cash and Cash Equivalents—The Company considers all highly liquid investments with original maturities of 90 days or less at date of acquisition to be cash equivalents.  Accounts at each institution regularly exceed Federal Deposit Insurance Corporation insurance coverage.  The Company has not experienced any losses in such accounts. 
 
Inventories are stated at the lower of cost (first-in, first-out method) or market.
 

42


Property, Plant and Equipment are recorded at cost and depreciated over estimated useful lives on the straight-line basis, and depreciation commences at the time assets are placed in service.  Leasehold improvements are amortized over the lesser of useful life or the term of the applicable lease using the straight-line method.  The range of useful lives for fixed assets is as follows:
 
Years
 
 
Buildings and improvements
7 to 40
Manufacturing equipment
3 to 10
Office equipment, furniture and fixtures
3 to 7
Computer equipment and software
3 to 7

Goodwill and Other Intangibles—The Company has only one reporting unit, and the estimated fair value of the Company approximates the market value of the Company.  The Company performed its annual assessment on July 31, 2013 and determined that there has been no impairment of goodwill due to the fair value of the reporting unit exceeding its carrying amount.  The fair value of the Company was calculated based on the market capitalization of the Company as of July 31, 2013.
 
Other intangibles are amortized over the estimated useful lives of the related assets, which are between 3 to 16 years.  Management periodically evaluates the recoverability of other intangibles based upon current and anticipated results of operations and undiscounted future cash flows.  Amortization of other intangibles was $996,000, $15,000, and $15,000 for the years ended September 30, 2013, 2012, and 2011, respectively (see Note 2).
 
Product Warranties—The Company provides a warranty on its products ranging from 90 days to five years following the date of shipment, the majority of which are for periods of one year or less.  Management establishes allowances for warranty costs based upon the types of products shipped and product warranty experience.  The provision for warranty costs is charged to cost of sales at the time of sale, and it is periodically assessed for adequacy based on changes in these factors.
 
A reconciliation of the changes in the Company’s allowances for warranties is as follows (in thousands):
 
 
 
2013
 
2012
Beginning Balance
 
$
2,030

 
$
2,423

Warranty costs incurred
 
(4,194
)
 
(3,639
)
Warranty expense accrued
 
4,741

 
3,276

Balance acquired in acquisition

107


—

Translation adjustments
 
52

 
(30
)
Ending balance
 
$
2,736

 
$
2,030


Research and Development—Expenditures for research and development are expensed when incurred.
 
Foreign Currency Translation—Assets and liabilities denominated in a foreign currency are translated to U.S. dollars at the exchange rate on the balance sheet date.  Translation adjustments are shown as part of accumulated other comprehensive income (loss).  Revenues, costs, and expenses are translated using an average rate.  Realized and unrealized foreign currency transaction gains and losses are included in the consolidated statement of operations.
 
Impairment of Long-Lived Assets—The Company regularly reviews all of its long-lived assets, including property, plant and equipment, and amortizable intangible assets, for impairment whenever events or changes in circumstances indicate that the carrying value may not be recoverable.  If the total of future undiscounted cash flows is less than the carrying amount of these assets, an impairment loss, if any, based on the excess of the carrying amount over the fair value of the assets, is recorded. There were no events during the period that indicated the carrying value of long-lived assets may be impaired.
 

43


Estimates—The preparation of financial statements in conformity with accounting principles generally accepted in the United States requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and reported amounts of revenues and expenses during the reporting period.  Actual results could differ from those estimates.

Termination Costs—In fiscal 2012, the Company announced certain cost reduction initiatives. As a result, the Company incurred approximately $800,000 in costs related to the reduction in force, the majority of which relates to one-time termination benefits. In addition, the Company incurred approximately $500,000 of other employment separation charges during fiscal 2012. Approximately $1.0 million and $300,000 of these costs were expensed as operating expenses and costs of goods sold, respectively, in fiscal 2012.
 
Financial Instruments—The carrying value of the Company’s cash and cash equivalents, accounts receivable, accounts payable, accrued payroll liabilities and commissions, accrued customer support and warranty costs, and other accrued liabilities approximates their estimated fair values due to the short maturities of those instruments.
 
Derivative Financial Instruments—The Company recognizes all derivatives on the balance sheet at fair value.  The Company enters into such instruments only with financial institutions of good standing, and the total credit exposure related to non-performance by those institutions is not material to the operations of the Company.
 
Earnings Per Share—Basic earnings per share (“EPS”) is computed by dividing net earnings available to common shareholders by the weighted average number of shares outstanding for the period.  Diluted EPS is computed by dividing net earnings available to common shareholders by the weighted average common stock and common stock equivalent shares outstanding during each period using the treasury stock method for employee stock option plans, warrants and service-based stock awards.  The calculation of the basic and diluted EPS from continuing operations is as follows (in thousands except per share data):
 
 
 
For the year ended September 30, 2013
 
 
Earnings
 
Shares
 
Per-Share Amount
Basic EPS:
 
 
 
 
 
 
Net earnings available to common shareholders
 
$
4,011

 
5,836

 
$
0.69

Effect of dilutive securities:
 
 
 
 
 
 
Common stock options
 
—

 
5

 
 
  Warrants



14



Diluted EPS:
 
 
 
 
 
 
Net earnings available to common shareholders plus assumed conversions
 
$
4,011

 
5,855

 
$
0.69


 
 
For the year ended September 30, 2012
 
 
Earnings
 
Shares
 
Per-Share Amount
Basic EPS:
 
 
 
 
 
 
Net earnings available to common shareholders
 
$
449

 
5,390

 
$
0.08

Effect of dilutive securities:
 
 
 
 
 
 
Common stock options
 
—

 
9

 
 
Diluted EPS:
 
 
 
 
 
 
Net earnings available to common shareholders plus assumed conversions
 
$
449

 
5,399

 
$
0.08



44


 
 
For the year ended September 30, 2011
 
 
Earnings
 
Shares
 
Per-Share Amount
Basic EPS:
 
 
 
 
 
 
Net earnings available to common shareholders
 
$
1,454

 
5,311

 
$
0.27

Effect of dilutive securities:
 
 
 
 
 
 
Common stock options
 
—

 
18

 
 
Diluted EPS:
 
 
 
 
 
 
Net earnings available to common shareholders plus assumed conversions
 
$
1,454

 
5,329

 
$
0.27


The weighted average number of diluted shares does not include potential common shares which are anti-dilutive.  The following potential common shares were not included in the calculation of diluted EPS as they were anti-dilutive:
 
 
 
For the year ended September 30,
 
 
2013
 
2012
 
2011
Common shares from:
 
 
 
 
 
 
Assumed exercise of stock options
 
10,000

 
10,000

 
—

       Warrants

—


—


—


The options expire on dates beginning in February 2014 through February 2015.  The restrictions on stock grants may lapse between October 2013 and August 2016. The warrants expire in March 2016.
 
Comprehensive Income (loss)—In fiscal 2012, the Company reclassified losses of $209,000 for accumulated currency translation adjustments from Other Comprehensive income to the results of operations in Other income (expense).This reclassification was related to an operational restructuring where the Company announced that it believed it could most effectively address the China market through its existing distributor and representative partnerships. Operations related to the China market would continue through these sales channels and internal sales functions in the United States. In fiscal 2012, as part of the implementation of this decision, the Company closed its small China sales office operating as a wholly-owned foreign subsidiary, Key Technology (Shanghai) Trading Co. Ltd., which resulted in the liquidation of the assets and liabilities of the foreign subsidiary.
 
Share-Based Compensation—The Company measures the cost of share-based payments based on the grant-date fair value of the award.  The cost is recognized as expense over the requisite service period required in exchange for the award.  No compensation cost is recognized for awards where the requisite service period is not completed.  For awards with a performance condition, compensation cost is only recognized if the performance condition is probable of being achieved.
 
Accounting for Income Taxes—Deferred income taxes are provided for the effects of temporary differences arising from differences in the reporting of revenues and expenses for financial statement and for income tax purposes under the asset and liability method using currently enacted tax rates. The Company recognizes the financial statement benefit of a tax position only after determining that the relevant tax authority would more likely than not sustain the position following an audit. For tax positions meeting the more-likely-than-not threshold, the amount recognized in the financial statements is the largest benefit that has a greater than 50% likelihood of being realized upon ultimate settlement with the relevant tax authority.

Reclassifications—Certain reclassifications, which were not material to the financial statements, have been made to prior year amounts to conform to the current year presentation.
 

45


2.
ACQUISITION

Effective February 28, 2013, the Company acquired all the outstanding stock of Visys N.V., a privately-held Belgian company. Accordingly, the results of operations for Visys N.V. have been included in the accompanying consolidated financial statements from that date forward. The acquisition was made for the purpose of acquiring and developing next-generation technologies and expanding our product offerings consistent with our strategic growth initiatives.

Fair Value of Consideration - Consideration for the acquisition consisted of the following (at fair value):

 
 
Amount
 
 
(in thousands)
Cash
 
$
13,200

Common shares of the Company issued (600,000 shares)
 
7,326

Warrants issued (250,000)
 
728

Total
 
$
21,254


Fair value of the Company's common shares issued was determined on the basis of the closing market price on the date of the closing of the acquisition. The fair value of the warrants was determined with a Black-Scholes valuation model using the current stock price at the acquisition date, time until expiration, a 34% volatility rate and a 0.36% risk-free interest rate. The warrants may be exercised within three years after the date of issue at a price per share of $11.78 as stated in the acquisition agreement. One-half of the warrants may be exercised following the first anniversary of the closing date and the other half following the second anniversary of the closing date. The warrants may be exercised for cash or on a cashless basis.

The following table summarizes the estimated fair values of the assets acquired and liabilities assumed at the acquisition date.

 
 
Amount
 
 
(in thousands)
Cash
 
$
1,593

Accounts receivable
 
668

Inventory
 
8,250

Property and equipment
 
299

Other assets
 
848

Intangible assets (identifiable)
 
11,400

Current liabilities, including current portion of long term debt
 
(5,609
)
Long term debt
 
(1,372
)
Deferred taxes
 
(3,794
)
Total identifiable net assets
 
12,283

Goodwill
 
8,971

 
 
$
21,254


Goodwill - Goodwill in the amount of $9.0 million was recognized in the acquisition of Visys N.V. and is attributable to the benefits expected to arise after the acquisition, including additional distribution and market penetration, which can be leveraged from the combined product portfolios. None of the total amount of goodwill recognized is expected to be deductible for income tax purposes.

The fair value of accounts receivables acquired was $668,000 with the gross contractual amount being $790,000. The fair value of the $1.9 million of debt assumed in the acquisition approximates its carrying value.


46


The fair value of inventory acquired includes an increase of $1.8 million related to the fair value adjustment of the acquisition date inventory.

Identified intangible assets acquired includes:
 
 
Amount
 
Average Life
 
 
(in thousands)
 
(Years)
Developed technology
 
$
5,000

 
8
Patents
 
3,300

 
16
Non-compete agreements
 
1,600

 
3
Trade name
 
1,000

 
8
Customer relationships
 
500

 
4
 
 
$
11,400

 
 

The identifiable intangible assets of $11.4 million are subject to a weighted-average useful life of approximately 9.4 years.

Pro forma Information - The amounts of Visys N.V. net sales and the net loss included in the consolidated income statement from the date of acquisition for fiscal 2013 was $5.0 million and $2.2 million, respectively. The following consolidated pro forma information is based on the assumption that the acquisition occurred on October 1, 2011 (in thousands except per share data).

 
 
 
 
 
 
 
Year Ended September 30,
 
 
2013
 
2012
Net sales
 
$
141,549

 
$
124,342

Net earnings (loss)
 
$
4,685

 
$
(1,170
)
Pro forma net earnings (loss) per share
 
$
0.77

 
$
(0.20
)
Pro forma weighted average shares outstanding
 
6,185

 
5,999


Pro forma net earnings was adjusted to exclude $785,000 of acquisition-related costs incurred in the period ending September 30, 2013 and $883,000 of non-recurring expenses related to the fair value adjustment of acquired inventory for the period ending September 30, 2013.

Acquisition-Related Costs - Costs related to the acquisition, which include legal, accounting and valuation fees, in the amount of $785,000 have been charged directly to operations and are included in Operating expenses as General and Administrative expenses in the 2013 consolidated statement of operations for the year ended September 30, 2013. The Company also recognized $188,000 in costs associated with issuing the common stock and warrants issued as consideration in the acquisition. Those costs were deducted from the recognized proceeds of issuance within shareholders' equity.

Litigation - The acquired company is subject to litigation proceedings in Belgium and the Netherlands for alleged patent infringement and unfair competition claims seeking damages for lost profits, procedural costs and other damages. The cumulative amount of claims is approximately €12.75 million. As a result of our due diligence investigation in connection with the acquisition of Visys, the Company believes the claims are without merit and intends to pursue its defenses in these proceedings. As a result, no provision has been recorded for these claims.


47


3.
GOODWILL AND OTHER INTANGIBLE ASSETS

 As of September 30, 2013, the Company had the following intangible assets (in thousands):
 
 
 
Cost
 
Net Book Value
 
Amortization Life (Years)
Patents and developed technologies
 
$
18,985

 
$
8,244

 
3 to 16

Trademarks and trade names
 
1,036

 
960

 
8

Customer relationships
 
518

 
442

 
4

Non-compete agreements
 
1,649

 
1,336

 
3

 
 
 
 
 
 
 

 
$
22,188

 
$
10,982

 


Amortization expense for the next five fiscal years is expected to be approximately:
 
Year Ended September 30,
(In thousands)
 
 
2014
$
1,741

2015
1,733

2016
1,369

2017
1,044

2018
991

Thereafter
4,104

Total
$
10,982


As of September 30, 2013, the Company had $11.8 million of goodwill which is not being amortized.  Other than the acquired goodwill in fiscal 2013, there were no changes to goodwill during the fiscal years ended September 30, 2013 and 2012.

4.
TRADE ACCOUNTS RECEIVABLE
 Trade accounts receivable consist of the following (in thousands):
 
 
 
September 30,
 
 
2013
 
2012
Trade accounts receivable
 
$
18,021

 
$
11,616

Allowance for doubtful accounts
 
(296
)
 
(190
)
Total trade accounts receivable, net
 
$
17,725

 
$
11,426


Amounts charged to bad debt expense for fiscal 2013, 2012, and 2011 were $2,000, $24,000, and $(126,000), respectively.  Actual charges to the allowance for doubtful accounts for fiscal 2013, 2012, and 2011 were $26,000, $84,000, and $65,000, respectively.
 


48



5.         INVENTORIES
 
Inventories consist of the following (in thousands):
 
 
September 30,
 
 
2013
 
2012
Purchased components and raw materials
 
$
10,657

 
$
8,659

Work-in-process and sub-assemblies
 
7,802

 
8,656

Finished goods
 
9,462

 
5,851

Total inventories
 
$
27,921

 
$
23,166


At September 30, 2013 and 2012, respectively, cumulative inventory adjustments to lower of cost or market totaled $3.5 million and $2.6 million.  Amounts charged to expense to record inventory at lower of cost or market were $1.7 million for fiscal 2013, $1.6 million for fiscal 2012, and $1.3 million for fiscal 2011.  Actual charges to the cumulative inventory adjustments upon disposition or sale of inventory were $0.9 million, $0.8 million, and $1.1 million for fiscal 2013, 2012, and 2011, respectively.

6.
PROPERTY, PLANT AND EQUIPMENT
 
Property, plant and equipment consist of the following (in thousands):

 
 
September 30,
 
 
2013
 
2012
Land and land improvements
 
$
2,571

 
$
2,555

Buildings and improvements
 
9,161

 
8,721

Manufacturing equipment
 
12,969

 
12,580

Computer equipment and software
 
18,299

 
16,440

Office equipment, furniture and fixtures
 
2,475

 
2,272

Construction in progress
 
40

 
561

 
 
45,515

 
43,129

Accumulated depreciation
 
(28,256
)
 
(24,759
)
Total property, plant and equipment, net
 
$
17,259

 
$
18,370


Depreciation expense was $3.9 million, $3.6 million, and $2.9 million for fiscal 2013, 2012, and 2011, respectively.


7.
INVESTMENT IN PRODITEC
 
In fiscal 2009, the Company acquired a 15% minority interest in Proditec SAS, a French manufacturer of automated, solid dose pharmaceutical inspection systems for approximately $1.5 million.  The Company has certain tag along rights related to any capital changes at Proditec and may sell its shares to any third party subject to Proditec’s by-laws and right of pre-emption by Proditec.  This investment is being accounted for under the cost method of accounting. In fiscal 2013 and 2012, the Company received $6,000 and $25,000, respectively, in dividends from Proditec which reduced the cost of the Company's investment.
 

49


As of September 30, 2013, the investment had a carrying value of approximately $1.1 million and the fair value of the Company’s investment in Proditec was not estimated as there were no events or changes in circumstances that may have a significant adverse effect on the fair value of the investment, and the Company’s management determined that it was not practicable to estimate the fair value of the investment.  Further, there are no quoted market prices for the Company’s investment, and sufficient information is not readily available for the Company to utilize a valuation model to determine its fair value without incurring excessive costs relative to the materiality of the investment.  The Company’s cost method investment is evaluated for potential other-than-temporary impairment on at least a quarterly basis, or when an event or change in circumstances has occurred that may have a significant adverse effect on the fair value of the investment.
 
8.
FINANCING AGREEMENTS
 
The Company’s domestic credit facility provides a revolving line of credit to the Company in the maximum principal amount of $15,000,000 and a credit sub-facility of up to $6,000,000 for standby letters of credit of which up to €3.0 million ($4.1 million) is available to our Netherlands facility.  The revolving line of credit matures on September 30, 2014.  The credit facility bears interest, at the Company’s option, at either the bank’s prime rate or the British Bankers Association LIBOR Rate (“BBA LIBOR”) using a tiered structure depending upon the Company’s achievement of a specified financial ratio.  The Company’s prime rate option will be either the bank’s prime rate or prime less 0.25% per annum.  The Company’s BBA LIBOR option will be either BBA LIBOR plus 1.75% or 1.50% per annum.  At September 30, 2013, the interest rate would have been 1.68% based on the lowest of the available alternative rates.  The revolving line of credit is secured by all U.S. accounts receivable, inventory, equipment, and fixtures.  At September 30, 2013 and 2012, the Company had no outstanding borrowings under the revolving line of credit and $548,000 and $250,000, respectively, in standby letters of credit.
 
The loan agreement also provided for a 15-year term loan in the amount of $6.4 million of which $4.8 million was outstanding as of September 30, 2013.  The term loan provides for a mortgage on the Company’s Avery Street headquarters land and building located in Walla Walla, Washington.  The term loan bears interest at the BBA LIBOR rate plus 1.40% and matures on January 2, 2024.  The Company has also simultaneously entered into an interest rate swap agreement with the lender to fix the interest rate at 4.27%.
 
The credit facilities contain covenants which require operating within a funded debt to EBITDA ratio, a fixed charge coverage ratio and minimum working capital levels.  The loan agreement permits capital expenditures up to a certain level, and contains customary default and acceleration provisions.  The credit facilities also restrict acquisitions, incurrence of additional indebtedness and lease expenditures above certain levels without the prior consent of the lender.  In fiscal 2013, the relevant loan agreement was amended to permit the acquisition of Visys N.V. At September 30, 2013, the Company was in compliance with its loan covenants.

The Company’s credit accommodation with a commercial bank in The Netherlands provides a credit facility for its European subsidiary.  This credit accommodation totals €1.75 million ($2.4 million) and includes an operating line of the lesser of €250,000 ($338,000) or the available borrowing base, which is based on varying percentages of eligible accounts receivable and inventories, and a bank guarantee facility of €1.5 million ($2 million).  The operating line and bank guarantee facility are secured by all of the subsidiary’s personal property.  The credit facility bears interest at the bank’s prime rate, with a minimum of 3.00%, plus 1.75%.  At September 30, 2013, the interest rate was 5.95%.  At September 30, 2013, the Company had no borrowings under this facility and had received bank guarantees of €502,000 ($679,000) under the bank guarantee facility.  The credit accommodation contains a covenant which requires the maintenance of minimum tangible net worth levels at the subsidiary measured as of September 30 of each fiscal year.  At September 30, 2013, the Company was in compliance with the tangible net worth covenant.  At September 30, 2012, the Company had no borrowings under this facility and had received bank guarantees of €152,000 ($196,000) under the bank guarantee facility.  The credit facility allows overages on the bank guarantee facility.  Any overages reduce the available borrowings from the operating line. 

The Company's Belgian subsidiary's credit accommodation with a commercial bank in Belgium provides a credit facility for its Belgian subsidiary. This credit accommodation totals €2.7 million ($3.7 million) and includes an operating line of €800,000 ($1.1 million), a bank guarantee facility of €500,000 ($0.7 million), and loan agreement provisions of €1.4 million ($1.9 million). The operating line and bank guarantee facility are secured by all of the subsidiary's current assets.The Belgian operating line bears interest at the bank's prime rate, plus 1.25%. At September 30, 2013, the interest rate was 9.75%. At September 30, 2013, the subsidiary had no borrowings under the operating line. At September 30, 2013, the subsidiary had various loans outstanding under the loan agreement provision totaling €1.1 million ($1.5 million). The fixed interest rates on these loans ranged from 2.91% to 3.98%. The loans mature between February 2014 and November

50


2017. The credit accommodation contains a covenant which requires the maintenance of a minimum tangible net worth and debt to EBITDA ratio levels at the subsidiary measured as of December 31 of each fiscal year. At December 31, 2012, the subsidiary was in compliance with the bank covenants. At September 30, 2013, the subsidiary had no bank guarantees under the bank guarantee facility. Additionally, the subsidiary had a subordinated loan with another European lender of €130,000 ($176,000). The loan has a fixed interest rate of 4.99% and matures in March 2016.

Principal payments on long-term debt are as follows:
Year Ended September 30,
(In thousands)
2014
$
871

2015
832

2016
820

2017
712

2018
486

Thereafter
2,762

Total
$
6,483


Based on the borrowing rates currently available to the Company for loans with similar terms and maturities, the fair value of long-term debt at September 30, 2013 approximates its carrying value.

9.
DERIVATIVE INSTRUMENTS

The Company uses derivative instruments as risk management tools but does not use derivative instruments for trading or speculative purposes.  Derivatives used for interest rate swap hedging purposes are designated and effective as a cash flow hedge of the identified risk exposure related to the Company’s variable rate mortgage at the inception of the contract.  A hedge is deemed effective if changes in the fair value of the derivative contract are highly correlated with changes in the underlying hedged item at inception of the hedge and over the life of the hedge contract.  To the extent the interest rate swap is effective, changes in the fair value will be recognized in Other Comprehensive Income over the term of the derivative contract.  To the extent the interest rate swap is not effective, changes in the fair value will be recognized in earnings.
 
At September 30, 2013, the Company had an interest rate swap with a notional amount of $4.8 million that effectively fixes the interest rate on its LIBOR-based variable rate mortgage at 4.27%.  At September 30, 2013, the fair value of the swap agreement recorded as a liability in Other long-term liabilities on the Consolidated Balance Sheet was $247,000.  There were no gains or losses recognized as part of net earnings in the Consolidated Statement of Operations related to the swap agreement during the fiscal year ended September 30, 2013, as the interest rate swap was highly effective as a cash flow hedge.  Consequently, changes in the fair value of the interest rate swap of $254,000 during fiscal 2013 were recorded as part of Other Comprehensive Income in the Equity section of the Company’s Consolidated Balance Sheet.  During fiscal 2013, the Company recorded $135,000 as interest expense related to the interest rate swap reflecting actual interest payments and settlements on the interest rate swap.  The interest rate swap matures in January 2024.
 
At September 30, 2013, the Company had a one-month undesignated forward exchange contract for €2.0 million ($2.7 million).  Forward exchange contracts are used to manage the Company’s foreign currency exchange risk related to its ongoing operations.  Net foreign currency losses of $180,000 were recorded for forward exchange contracts in the year ended September 30, 2013 in Other income (expense) on the Company’s Consolidated Statement of Operations.  The losses on the Company’s forward exchange contracts are generally offset by gains recorded on the underlying assets or liabilities held in foreign currencies.  At September 30, 2013, the Company had liabilities of $46,000 for settlements under these forward contracts in Other accrued liabilities on the Company’s Consolidated Balance Sheet.  At September 30, 2012, the Company had liabilities of $252,000 under these forward contracts in Other accrued liabilities on the Company’s Consolidated Balance Sheet.


51


10.
FAIR VALUE MEASUREMENTS
 
Fair value measurements are classified under the following hierarchy:

•
Level 1 – Quoted prices for identical instruments in active markets.
•
Level 2 – Quoted prices for similar instruments in active markets; quoted prices for identical or similar instruments in markets that are not active; and model-derived valuations in which all significant inputs or significant value-drivers are observable in active markets.
•
Level 3 – Model-derived valuations in which one or more significant inputs or significant value-drivers are unobservable.

When available, the Company uses quoted market prices to determine fair value and classifies such measurements within Level 1.  In some cases where market prices are not available, the Company makes use of observable market-based inputs to calculate fair value, in which case the measurements are classified within Level 2.  If quoted or observable market processes are not available, fair value is based upon internally developed models that use, where possible, current market-based parameters such as interest rates, yield curves and currency rates.  These measurements are classified within
Level 3.
 
Derivative financial instruments
 
Interest rate swap agreements are measured on a recurring basis based on quoted prices for similar financial instruments and other observable inputs which approximate fair value.  The fair value of foreign currency forward contracts is based on the differential between contract price and the market-based forward rate.
 
The following table presents the Company’s assets and liabilities that are measured and recorded at fair value on a recurring basis consistent with the fair value hierarchy provisions.
 
 
 
Fair Value Measurements at September 30, 2013,
(in thousands)
Description
 
Level 1
 
Level 2
 
Level 3
 
Total Assets/Liabilities at Fair Value
Derivatives:
 
 
 
 
 
 
 
 
Interest rate swap
 
—

 
$
(247
)
 
—

 
$
(247
)
Forward exchange contracts
 
—

 
—

 
—

 
—


At September 30, 2013, the Company had long-term debt of approximately $6.5 million.  The Company’s long-term debt is recorded at historical cost, and the Company has not elected to fair value such financial instruments.  The estimated fair value of the debt approximated its carrying value based on the borrowing rates currently available to the Company for loans with similar terms and maturities.
 
Fair value estimates are made at a specific point in time based on relevant market information and information about the financial instrument.  These estimates are subjective in nature and involve uncertainties and matters of significant judgment and, therefore, cannot be determined with precision.  Forward exchange contracts had a fair value of zero at the reporting date, as these contracts were entered into as of that date.  Changes in assumptions could significantly affect these estimates.
 
At September 30, 2013, the Company’s minority interest in Proditec SAS had a carrying value of approximately $1.1 million.  This investment is being accounted for under the cost method.  The fair value of the Company’s investment in Proditec was not estimated as there were no events or changes in circumstances that may have had a significant adverse effect on the fair value of the investment, and the Company’s management determined that it was not practicable to estimate the fair value of the investment.  Further, there are not quoted market prices for the Company’s investment, and sufficient information is not readily available for the Company to utilize a valuation model to determine its fair value without incurring excessive costs relative to the materiality of the investment.  The Company’s cost method investment

52


is evaluated for potential other-than-temporary impairment on at least a quarterly basis, or when an event or change in circumstances has occurred that may have a significant adverse effect on the fair value of the investment.

11.
LEASES
 
The Company has a leased sales facility in Washington State.  The lease expires in 2015, with two five year renewal options.  The Company has the option to purchase the facility at any time over the rental period for $1.5 million declining to $1.4 million during the remaining lease term.  The Company has a leased operating facility in Oregon the lease on which expires in 2022, with two five-year renewal options.  The Company has leased an operating facility in The Netherlands under a lease that expires in 2015, with a one-year renewal option, and a leased warehouse facility which expires in 2015. The Company has a leased operating facility in Belgium under a lease which expires in 2016, with a three-year renewal option. The Company also has leased office space for sales and service and other activities in Australia, Mexico, and Belgium, and other leased facilities in Walla Walla.  The Company also has leased vehicles, primarily in international locations.
 
Rental expense is recognized on a straight-line basis over the term of the lease.  Rental expense for the Company’s operating leases referred to above was $1.3 million for the year ended September 30, 2013, $1.2 million for the year ended September 30, 2012, and $1.2 million for the year ended September 30, 2011.
 
The following is a schedule of future minimum rental payments required under operating leases and future rental expense (in thousands):

Year Ending September 30,
 
Rental Payments
 
Rental Expense
2014
 
$
1,162

 
$
1,176

2015
 
791

 
802

2016
 
448

 
456

2017
 
286

 
290

2018
 
283

 
283

Thereafter
 
1,000

 
952

Total
 
$
3,970

 
$
3,959


12.
CONTRACTUAL GUARANTEES AND INDEMNITIES

 Intellectual property and general contractual indemnities
 
The Company, in the normal course of business, provides specific, limited indemnification to its customers for liability and damages related to intellectual property rights.  In addition, the Company may enter into contracts with customers where it has agreed to indemnify the customer for personal injury or property damage caused by the Company’s products and services. Indemnification is typically limited to replacement of the items or the actual price of the products and services.  The Company maintains product liability insurance as well as errors and omissions insurance, which may provide a source of recovery in the event of an indemnification claim, but does not maintain insurance coverage for claims related to intellectual property rights.
 
Historically, any amounts payable under these indemnifications have not had a material effect on the Company’s business, financial condition, results of operations, or cash flows. The Company has not recorded any provision for future obligations under these indemnifications.  If the Company determines it is probable that a loss has occurred under these indemnifications, then any such reasonably estimable loss would be recognized.

Director and officer indemnities
 
The Company has entered into indemnification agreements with its directors and certain executive officers which require the Company to indemnify such individuals against certain expenses, judgments and fines in third-party and derivative proceedings.  The Company may recover, under certain circumstances, some of the expenses and liabilities that arise in connection with such indemnifications under the terms of its directors’ and officers’ insurance policies.  The Company has not recorded any provision for future obligations under these indemnification agreements.

53


 
Bank guarantees and letters of credit
 
At September 30, 2013, the Company had standby letters of credit totaling $1.2 million, which includes secured bank guarantees under the Company's domestic and European credit facilities. If the Company fails to meet its contractual obligations, these bank guarantees and letters of credit may become liabilities of the Company.  This amount consists of approximately (i) $548,000 of outstanding performance guarantees secured by bank guarantees under the Company's domestic credit facility, (ii) $679,000 of outstanding performance guarantees secured by bank guarantees under the Company's Netherlands subsidiary’s credit facility, and (iii) no outstanding performance guarantees secured by bank guarantees under the Company's Belgian subsidiary's credit facility.  Bank guarantees arise when the Company collects customer deposits prior to order fulfillment.  The customer deposits received are recorded as current liabilities on the Company's balance sheet.  The bank guarantees repayment of the customer deposit in the event an order is not completed.  The bank guarantee is canceled upon shipment and transfer of title.  These bank guarantees arise in the normal course of the Company's business and are not deemed to expose the Company to any significant risks since they are satisfied as part of the design and manufacturing process.

13.
INCOME TAXES
 
The provision for income taxes from continuing operations consists of the following (in thousands):

 
 
Year Ended Year Ended September 30,
 
 
2013
 
2012
 
2011
Current:
 
 
 
 
 
 
Federal
 
$
4,381

 
$
255

 
$
(1,271
)
Foreign
 
14

 
10

 
57

State
 
387

 
35

 
(30
)
 
 
4,782

 
300

 
(1,244
)
Deferred:
 
 
 
 
 
 
Federal
 
(2,180
)
 
(101
)
 
2,758

Foreign
 
(1,092
)
 
(48
)
 
(1,060
)
State
 
(110
)
 
(11
)
 
58

 
 
(3,382
)
 
(160
)
 
1,756

Valuation reserves:
 
 
 
 
 
 
Federal
 
137

 
(1,749
)
 
(177
)
Foreign
 
(135
)
 
1,754

 
161

State
 
—

 
—

 
(1
)
 
 
2

 
5

 
(17
)
Total income tax expense
 
$
1,402

 
$
145

 
$
495


The Company accounts for its deferred tax assets and liabilities, including excess tax benefits of share-based payments, based on the tax ordering of deductions to be used on its tax returns.  The tax effects of temporary differences that give rise to significant portions of deferred tax assets and deferred tax liabilities are as follows (in thousands):

54


 
 
September 30,
 
 
2013
 
2012
Deferred tax asset:
 
 
 
 
Reserves and accruals
 
$
4,807

 
$
2,836

Tax benefits of share-based payments
 
704

 
754

NOL and other carry forwards
 
878

 
88

Unrealized changes in value of derivatives to equity
 
84

 
34

Deferred tax liability:
 
 
 
 
Accumulated depreciation
 
(1,437
)
 
(2,037
)
Intangible assets
 
(4,025
)
 
(253
)
Translation adjustment to equity
 
(443
)
 
(2
)
Net deferred tax asset
 
$
568

 
$
1,420

Net deferred tax:
 
 
 
 
Current asset
 
$
5,034

 
$
2,854

Long-term asset
 
760

 
—

Long-term liability
 
(5,226
)
 
(1,434
)
Net deferred tax asset
 
$
568

 
$
1,420


At September 30, 2013, the Company had valuation reserves of approximately $180,000 for deferred tax assets for capital loss carry forwards and changes in the carrying value of its investment in Proditec, and offsetting amounts for foreign deferred tax assets and U.S. deferred tax liabilities, primarily related to net operating loss carry forwards in the foreign jurisdictions that the Company believes will not be utilized during the carryforward period. During fiscal 2013, the Company recorded net additional valuation reserves of $2,000 related to capital loss carryforwards and $3,000 as part of the acquisition of Visys related to net operating loss carryforwards. In addition, the Company reversed offsetting amounts of approximately $135,000 of valuation reserves for foreign deferred tax assets and U.S. deferred tax liabilities related to the utilization of net operating loss carryforwards in Europe in fiscal 2013. As these were offsetting amounts, these changes had no effect on net earnings.  

During fiscal 2012, the Company recorded net additional valuation reserves of $5,000 related to capital loss carryforwards. In addition, the Company recorded offsetting amounts of approximately $2.5 million of valuation reserves for foreign deferred tax assets and U.S. deferred tax liabilities related to net operating loss carryforwards in foreign jurisdictions that the Company believes will not be utilized during the carryforward periods. The Company also reversed offsetting amounts of approximately $700,000 of valuation reserves for Chinese deferred tax assets and U.S. deferred tax liabilities related to net operating loss carryforwards that were utilized in the foreign jurisdiction. As these were all offsetting amounts, these changes had no effect on net earnings.   There were no other valuation allowances at September 30, 2013 due to anticipated utilization of all the deferred tax assets as the Company believes it will have sufficient taxable income to utilize these assets.
 
During fiscal 2011, the Company recorded $160,000 of valuation reserves related to net operating loss carryforwards in foreign jurisdictions offset by U.S. deferred tax liabilities and reversed $17,000 of valuation reserves for capital loss carryforwards that were utilized to offset capital gains on its corporate income tax return.  
 

55


Income tax expense is computed at rates different than statutory rates.  The reconciliation between effective and statutory rates is as follows:
 
 
Year Ended September 30,
 
 
2013
 
2012
 
2011
Statutory rates
 
34.0
 %
 
34.0
 %
 
34.0
 %
Increase (reduction) in income taxes resulting from:
 
 
 
 
 
 
Domestic production deduction
 
(6.5
)%
 
(7.5
)%
 
—
 %
Research and development credit
 
(6.2
)%
 
(13.3
)%
 
(12.6
)%
Changes in tax law, R&D credit
 
(3.5
)%
 
—
 %
 
(3.7
)%
State income taxes, net of federal benefit
 
3.4
 %
 
2.7
 %
 
0.9
 %
Rate differential, surtax on taxable income levels

0.8
 %

—
 %

—
 %
Differences in foreign rates

0.1
 %

—
 %

—
 %
Non-deductible acquisition costs

2.5
 %

—
 %

—
 %
Tax exempt interest
 
—
 %
 
—
 %
 
(0.1
)%
Valuation reserve-capital losses
 
—
 %
 
(0.7
)%
 
(0.8
)%
Valuation reserve-Proditec
 
—
 %
 
1.5
 %
 
—
 %
Meals and entertainment deduction limitation
 
1.2
 %
 
9.6
 %
 
3.6
 %
Non-deductible stock compensation
 
0.1
 %
 
0.8
 %
 
0.3
 %
Loss of permanent deductions due to NOL carryback
 
—
 %
 
—
 %
 
3.8
 %
Other permanent differences
 
—
 %
 
(2.7
)%
 
—
 %
Income tax combined effective rate
 
25.9
 %
 
24.4
 %
 
25.4
 %
 
In fiscal 2013, the existing research and development tax credit was retroactively renewed and extended to December 31, 2013.  Due to this change in tax law, the Company recorded approximately $192,000 of additional research and development credits in fiscal 2013 related to research and development expenditures incurred during fiscal 2012. The research and development credit was effective for the Company for only the first fiscal quarter of 2012 prior to its expiration date. Similarly, in fiscal 2011, an additional $72,000 of research and development credits were recorded which related to research and development expenditures in fiscal 2010.   The research and development credit expires December 31, 2013 and, as of the date of this report, has not been renewed.  
 
A reconciliation of the beginning and ending amount of unrecognized tax benefits is as follows (in thousands):

Balance at October 1, 2012
$
72

Additions based on tax positions related to the current period
57

Additions for tax positions of prior period
—

Reductions for tax positions of prior periods
(3
)
Settlements
—

Balance at September 30, 2013
$
126

 
As of September 30, 2013, the amount of unrecognized tax benefits, which if recognized would favorably affect the Company’s effective tax rate, is $126,000.
 
The Company is subject to income taxes in the U.S. federal jurisdiction and various state and foreign jurisdictions.  Tax regulations within each jurisdiction are subject to the interpretation of the related tax laws and regulations and require significant judgment to apply.   The Company is generally no longer subject to U.S. federal, state and local, or non-U.S. income tax examinations by tax authorities for the years before 2008.
 
The Company is not currently under examination by any U.S. federal or state jurisdictions, or foreign jurisdictions, and there are no expected material changes in the unrecognized tax benefit liability within the next twelve months.  While it is often difficult to predict the final outcome or the timing of resolution of any particular uncertain tax positions, the Company believes its recorded liabilities for income taxes represent the most probable outcome.  The Company adjusts these liabilities in light of changing facts and circumstances.

56



The Company recognizes interest accrued related to unrecognized tax benefits in interest expense and penalties in other income and expense for all periods presented.    As of September 30, 2013 and 2012, the Company had accrued $42,000 and $28,000, respectively, for possible interest and penalties.
 
14.
SHARE-BASED COMPENSATION PLANS

At September 30, 2013, the Company had three share-based compensation plans, which are shareholder-approved, as described below.  The Company issues new shares of common stock for exercises and awards under these plans and non-employee awards.
 
Share-based compensation costs charged against income are as follows (in thousands):
 
 
 
Year Ended September 30,
 
 
2013
 
2012
 
2011
Cost of goods sold
 
$200
 
$126
 
$108
Operating expenses
 
1,076
 
1,056
 
1,299
Total share-based compensation expense
 
1,276
 
1,182
 
1,407
Income tax benefit
 
455
 
420
 
500
 
Approximately $21,000, $11,000, and $12,000 of share-based compensation expense remained capitalized in inventory as of September 30, 2013, 2012, and 2011, respectively.
 
As of September 30, 2013, the total unrecognized compensation cost related to these plans was $2.0 million and was comprised of: $1.9 million related to service-based stock awards that is expected to be recognized over a weighted-average period of 2.09 years and $78,000 related to performance-based stock awards that are expected to be recognized over the weighted-average period of 1.55 years.
 
Employees’ Stock Incentive Plans—Under the 2010 Equity Incentive Plan and the 2003 Restated Employees’ Stock Incentive Plan (the “Incentive Plans”), eligible employees may receive restricted stock, incentive stock options or non-qualified stock options. The restrictions on restricted stock awards lapse based on employment-based or performance-based measures.  Options have a contractual term of 10 years and the option exercise price is the fair market value of the underlying stock at the date of grant. At September 30, 2013, the total number of shares reserved for issuance under the Incentive Plans was 672,474, of which 220,193 were available for grant.

Incentive Stock Options—A summary of option activity under the Incentive Plan as of September 30, 2013 and the year then ended is presented below:

Options
 
Number of Shares
 
Weighted-Average Exercise Price
 
Weighted-Average Remaining Contractual Term
 
Aggregate Intrinsic Value ($000)
Outstanding at October 1, 2012
 
35,000

 
$
10.41

 
—

 
—

Granted
 
—

 
—

 
—

 
—

Exercised
 
(10,000
)
 
$
5.62

 
—

 
—

Forfeited or expired
 
—

 
—

 
—

 
—

Outstanding at September 30, 2013
 
25,000

 
$
12.32

 
0.85

 
$
55

Exercisable at September 30, 2013
 
25,000

 
$
12.32

 
0.85

 
$
55

 
There were no options granted in fiscal 2013, 2012, or 2011.  The total intrinsic value of options exercised during the years ended September 30, 2013, 2012, and 2011 was $66,000, $108,000, and $44,000, respectively.  No shares vested in fiscal 2013, 2012 or 2011.

57


 
As of September 30, 2013, there was no unrecognized compensation cost related to stock options granted under the Incentive Plans.
 
Service-Based Stock Awards—Under the Incentive Plans, the Company may award service-based stock grants to selected executives and other key employees the lapse of the restrictions on which is contingent upon meeting the required service period, generally two or three years, and in the case of certain executives, in increments over a three-year period, or in the case of members of the Board of Directors, one year.  The fair value of these grants is based on the closing fair market value at the grant date.  The restrictions on the grants lapse at the end of the required service period.  Stock compensation expense is recognized based on the grant date fair value of the stock over the vesting period.
 
The summary of activity for service-based stock awards as of September 30, 2013, and changes during the year then ended, is presented below:
Service-Based Stock Awards
 
Number of Shares
 
Weighted-Average Grant Date Fair Value per Share
Non-vested balance at October 1, 2012
 
186,497

 
$
13.92

Granted
 
178,163

 
$
11.65

Vested
 
(103,565
)
 
$
12.76

Forfeited
 
(8,860
)
 
$
11.84

Non-vested and expected to vest balance at September 30, 2013
 
252,235

 
$
12.86

 
The number of shares granted in fiscal 2013 that vest in one year or less was 49,294, vest in two years was 32,873, and vest in three years was 95,996.  The total fair value of shares vested in fiscal 2013, 2012, and 2011 was $1.5 million, $0.9 million, and $1.6 million, respectively.  As of September 30, 2013, there was $1.9 million of total unrecognized compensation cost related to service-based stock awards that is expected to be recognized over a weighted-average period of 2.09 years.  In fiscal 2012, the Company granted 95,805 shares of service-based awards with a weighted average grant date fair value of $13.06.  In fiscal 2011, the Company granted 53,470 shares of service-based awards with a weighted average grant date fair value of $17.89.

Employee Performance-Based Stock Awards—In fiscal 2013, the Company awarded performance-based stock grants to selected executives. The lapse of restrictions on the awards is contingent on achievement of performance-based objectives as determined by the Compensation and Management Development Committee of the Board of Directors over a three-year period ending September 30, 2015. In fiscal 2012, the Company awarded performance-based stock grants to selected executives.  The lapse of restrictions on some of the awards is contingent on achievement of performance-based objectives as determined by the Compensation and Management Development Committee of the Board of Directors over a three-year period ending September 30, 2014.  In fiscal 2011, the Company awarded performance-based stock grants to selected executives.  The lapse of restrictions on some of the awards was contingent on achievement of performance-based objectives as determined by the Compensation and Management Development Committee of the Board of Directors for the fiscal year ended September 30, 2011 and for others over a three-year period ended September 30, 2013. 
 
Compensation expense is recognized over the period the employee performs related services based on the estimated number of shares expected to vest at the grant date fair value and if it is probable that the performance goal will be achieved.  If the performance goals are not met or the service period is not fulfilled, no compensation cost is recognized and any recognized compensation cost will be reversed.
 

58


A summary of the activity for performance-based stock awards as of September 30, 2013, and changes during the year then ended, is presented below:
Performance-Based Stock Awards
 
Number of Shares
 
Weighted-Average Grant Date Fair Value per Share
Non-vested balance at October 1, 2012
 
76,622

 
$
13.00

Granted
 
103,026

 
$
14.67

Vested
 
—

 
$
—

Forfeited
 
(4,602
)
 
$
14.67

Non-vested balance at September 30, 2013
 
175,046

 
$
13.94

 
The total fair value of shares that vested in fiscal 2013, 2012, and 2011 was $0, $0, and $245,000, respectively.  The Company estimates it is less than probable that the performance based objectives will be achieved on all but 5,304 shares related to these awards and, therefore, no compensation cost is expected to be recognized on these awards. As of September 30, 2013, there was $78,000 of total unrecognized compensation cost related to the performance-based stock awards, where it is probable the performance based objectives will be achieved, that is expected to be recognized over a weighted-average period of 1.55 years.  In fiscal 2012, the Company granted 92,910 shares of performance based awards with a grant date fair value of $11.20.  In fiscal 2011, the Company granted 60,212 shares of performance-based awards with a grant date fair value of $17.37.
 
Employee Stock Purchase Plan—Most employees are eligible to participate in the Company’s Employee Stock Purchase Plan (the “Purchase Plan”).  Shares are not available to employees who already own 5% or more of the Company’s stock.  Employees can withhold, by payroll deductions, up to 5% of their regular compensation to purchase shares at a purchase price of 85% of the fair market value of the common stock on the purchase date.  There were 500,000 shares reserved for purchase under the Purchase Plan of which 357,769 remained available at September 30, 2013.

During the years ended September 30, 2013, 2012, and 2011, the Company issued 6,257, 8,417, and 8,269 shares, respectively, under the Purchase Plan and recorded compensation cost based on the 15% discount from market price paid by the employees.
 
Cash received from option exercises and employee stock purchase plan purchases was $95,000, $94,000, and $147,000 for the years ended September 30, 2013, 2012 and 2011, respectively.  The tax benefit to be realized for the tax deductions from option exercises and restricted shares vesting under the share-based payment arrangements was $453,000, $392,000, and $642,000 for the years ended September 30, 2013, 2012 and 2011, respectively.

15.
STOCK REPURCHASE PROGRAM

The Company initiated a stock repurchase program effective May 30, 2012 to repurchase up to 500,000 shares of its common stock.  The Company retires the shares upon repurchase and the new program replaces the prior stock repurchase program which has been terminated.  The timing of any repurchases and the exact number of shares to be purchased will be determined by the Company and will depend on market conditions and other factors. The program does not incorporate a fixed expiration date. In fiscal 2013, the Company purchased and retired 3,288 shares at an average price of $9.20 per share. In fiscal 2012, the Company purchased and retired 67,509 shares at an average price of $9.83 per share. Included in the 2012 amount was the repurchase of 25,000 shares of Common Stock from a former executive under the terms of a separation agreement. The shares were purchased at an average price of $9.88 per share based on the daily closing price of the Company's Common Stock on The NASDAQ Global Market less $0.03 per share. The total purchase price paid was approximately $247,000. The aggregate purchase price of the shares repurchased under the program has been reflected as a reduction in shareholders' equity.   There were no open-market repurchases in fiscal 2011.  


59


16.
EMPLOYEE BENEFIT PLANS

The Company has a 401(k) profit sharing plan which covers substantially all United States employees.  The Company matches 50% of employee contributions for a maximum match of 4% of each participating employee’s compensation.  The matching contributions were temporarily suspended in March 2009 and reinstated during fiscal 2010.  The Company contributed $632,000, $676,000, and $651,000 in matching funds to the plan for the years ended September 30, 2013, 2012 and 2011, respectively.

17.
SEGMENT INFORMATION

The Company’s business units serve customers in its primary market—the food processing and agricultural products industry—through common sales and distribution channels.  Therefore, the Company reports on one segment.  The following table summarizes information about products and services (in thousands).

 
 
Year Ended September 30,
 
 
2013
 
2012
 
2011
Net sales by product category:
 
 
 
 
 
 
Automated inspection systems
 
$
59,336

 
$
46,586

 
$
52,962

Process systems
 
50,729

 
44,940

 
40,716

Parts and service
 
26,718

 
23,648

 
22,650

Total net sales by product category
 
$
136,783

 
$
115,174

 
$
116,328

 
Net sales for service were less than 10% of total net sales for the years ended September 30, 2013, 2012, and 2011, respectively, and is therefore summarized with parts and service.  Upgrades of automated inspection systems are included with automated inspection systems.

The following table summarizes certain information about geographic areas (in thousands):
 
 
 
Year Ended September 30,
 
 
2013
 
2012
 
2011
Net sales:
 
 
 
 
 
 
Domestic
 
$
75,423

 
$
63,831

 
$
68,986

International
 
61,360

 
51,343

 
47,342

Total net sales
 
$
136,783

 
$
115,174

 
$
116,328

Long-lived assets:
 
 
 
 
 
 
Domestic
 
$
17,812

 
$
19,387

 


International
 
23,446

 
2,698

 


Total long-lived assets
 
$
41,258

 
$
22,085

 


 
There was one customer that accounted for greater than 10% of net sales during fiscal 2013 , 2012 and 2011. There was one additional customer that individually accounted for 10% of net sales during fiscal 2013.  No single country outside the United States accounted for more than 10% of net sales in 2013, 2012 or 2011.  Location of the customer is the basis for the categorization of net sales.

60


18.
CONTINGENCIES AND COMMITTMENTS

On January 27, 2006, Belgian Electronics Sorting Technologies NV ("BEST") filed a complaint in the Court of First Instance in Antwerp, Belgium against our subsidiary Visys, acquired on February 28, 2013, alleging infringement of BEST's patent on a sorting apparatus with a laser detection system. BEST seeks injunctive relief, and damages and costs aggregating approximately €12,750,000. Visys has introduced certain counterclaims and commenced related proceedings in the Netherlands alleging the invalidity of the principal patent in question. In October 2012, the invalidity claim was partially granted by the Dutch court. Oral argument is now scheduled in the Belgian proceeding for February 2014, with a possible decision expected later in 2014.

In addition, on August 17, 2007, BEST started entitlement proceedings in the Court of First Instance in Antwerp related to two patents of Visys which Visys does not currently use. This case is set for trial before the Court of Appeal of Antwerp in April 2014. On June 29, 2011, BEST commenced nearly identical entitlement proceedings in the Commercial Court of Antwerp regarding a U.S. patent of Visys that is part of the same patent family as is at issue in the entitlement proceeding set for trial in the Court of Appeal. The judge in the Commercial Court has stayed these proceedings until the decision of the Court of Appeal.

Lastly, on April 30, 2008, BEST initiated proceedings against Visys for trademark infringement and unfair competition, which proceedings have been dismissed by the Court of Appeal of Antwerp. The Belgian Supreme Court confirmed this decision, except for two claims related to unfair trade practices concerning use of meta tags and a domain name. These issues were appealed and argued before the European Court of Justice in January 2013. The European Court of Justice decided the two technical legal issues before it in July 2013 and remanded the case back to the Belgian Supreme Court for further proceedings. We currently believe the financial consequences of the remaining claims are not material.

As a result of our due diligence investigation in connection with the acquisition of Visys, we believe BEST's claims against Visys are without merit, and Visys intends to pursue its defenses in these proceedings.


61




* * * * * *
SUPPLEMENTARY DATA
QUARTERLY FINANCIAL INFORMATION (Unaudited)
 
The following is a summary of operating results by quarter for the years ended September 30, 2013 and 2012 (in thousands, except per share data):

2013 Quarter Ended
 
December 31
 
March 31
 
June 30
 
September 30
 
Total
Net sales
 
$
19,854

 
$
35,486

 
$
39,433

 
$
42,012

 
$
136,783

Gross profit
 
6,484

 
12,813

 
13,302

 
13,447

 
46,044

Net earnings (loss)
 
(874
)
 
2,146

 
1,444

 
1,295

 
4,011

Net earnings (loss) per share - basic
 
$
(0.16
)
 
$
0.38

 
$
0.23

 
$
0.21

 
$
0.69

Net earnings (loss) per share - diluted
 
$
(0.16
)
 
$
0.38

 
$
0.23

 
$
0.21

 
$
0.69

2012 Quarter Ended
 
December 31
 
March 31
 
June 30
 
September 30
 
Total
Net sales
 
$
25,972

 
$
27,249

 
$
34,620

 
$
27,334

 
$
115,174

Gross profit
 
8,561

 
7,917

 
10,457

 
8,901

 
35,835

Net earnings (loss)
 
(243
)
 
(726
)
 
264

 
1,154

 
449

Net earnings (loss) per share - basic
 
$
(0.05
)
 
$
(0.13
)
 
$
0.05

 
$
0.22

 
$
0.08

Net earnings (loss) per share - diluted
 
$
(0.05
)
 
$
(0.13
)
 
$
0.05

 
$
0.22

 
$
0.08


Note:  Annual totals may not agree to the summarization of quarterly information due to insignificant rounding and the required calculation conventions.

* * * * * *



62


ITEM 9.
CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE.

None.

ITEM 9A.
CONTROLS AND PROCEDURES.

Evaluation of Disclosure Controls and Procedures

Our management, with the participation of our President and Chief Executive Officer and Vice President and Chief Financial Officer, conducted an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures, as required by Exchange Act Rule 13a-15.  Based on that evaluation, the President and Chief Executive Officer and Vice President and Chief Financial Officer have concluded that, as of the end of the period covered by this report, our disclosure controls and procedures were effective to ensure that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified by the SEC’s rules and forms and such information is accumulated and communicated to management as appropriate to allow timely decisions regarding required disclosures.

Management’s Report on Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting.  Our internal control over financial reporting is a process designed under the supervision of our President and Chief Executive Officer and Vice President and Chief Financial Officer to provide reasonable assurance regarding the reliability of financial reporting and the preparation of our financial statements for external reporting in accordance with accounting principles generally accepted in the United States of America.  Management evaluates the effectiveness of our internal control over financial reporting using the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in “Internal Control – Integrated Framework (1992).”  Management, under the supervision and with the participation of our President and Chief Executive Officer and Vice President and Chief Financial Officer, assessed the effectiveness of the design and operation of our internal control over financial reporting as of September 30, 2013 and concluded that our internal control over financial reporting was effective.

Attestation Report of the Company’s Independent Registered Public Accounting Firm

Our independent registered public accounting firm, Grant Thornton LLP, has audited the effectiveness of our internal control over financial reporting as of September 30, 2013, and has issued an attestation report expressing an unqualified opinion on our internal control over financial reporting which appears in this Annual Report on Form 10-K.

Changes in Internal Controls

There were no changes in our internal control over financial reporting identified in connection with the evaluation referred to above that occurred during the fourth quarter of the fiscal year ended September 30, 2013 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Limitations on the Effectiveness of Controls

We believe that a control system, no matter how well designed and operated, cannot provide absolute assurance that the objectives of the control system are met, and no evaluation of controls can provide absolute assurance that all controls issues and instances of fraud, if any, within a Company have been detected.  Our disclosure controls and procedures are designed to provide reasonable assurance of achieving their objectives, and our President and Chief Executive Officer and Vice President and Chief Financial Officer have concluded that such controls and procedures are effective at the “reasonable assurance” level.

63


PART III

ITEM 10.
DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNACE.

There is hereby incorporated by reference the information under the captions “Information About Key’s Board of Directors,” “Election of Directors,” “Section 16(a) Beneficial Ownership Reporting Compliance” and “Report of the Audit Committee of the Board of Directors” in our definitive Proxy Statement to be filed pursuant to Regulation 14A, which Proxy Statement is expected to be filed with the Securities and Exchange Commission within 120 days after the end of our fiscal year ended September 30, 2013.

ITEM 11.
EXECUTIVE COMPENSATION.

There is hereby incorporated by reference the information under the captions “Compensation Discussion and Analysis,” "Compensation Committee Interlocks and Insider Participation," “Compensation and Management Development Committee Report” and “Executive Compensation” in our definitive Proxy Statement to be filed pursuant to Regulation 14A, which Proxy Statement is expected to be filed with the Securities and Exchange Commission within 120 days after the end of our fiscal year ended September 30, 2013.

ITEM 12.
SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS.

There is hereby incorporated by reference the information under the caption “Principal Shareholders” and "Executive Compensation Plan Information" in our definitive Proxy Statement to be filed pursuant to Regulation 14A, which Proxy Statement is expected to be filed with the Securities and Exchange Commission within 120 days after the end of our fiscal year ended September 30, 2013.

ITEM 13.
CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE.

There is hereby incorporated by reference the information under the caption “Information About Key’s Board of Directors” in our definitive Proxy Statement to be filed pursuant to Regulation 14A, which Proxy Statement is expected to be filed with the Securities and Exchange Commission within 120 days after the end of our fiscal year ended September 30, 2013.

ITEM 14.
PRINCIPAL ACCOUNTANT FEES AND SERVICES.

There is hereby incorporated by reference the information under the caption “Audit Committee Report and Other Related Matters” in our definitive Proxy Statement to be filed pursuant to Regulation 14A, which Proxy Statement is expected to be filed with the Securities and Exchange Commission within 120 days after the end of our fiscal year ended September 30, 2013.


64


PART IV

ITEM 15.
EXHIBITS AND FINANCIAL STATEMENT SCHEDULES.
PAGE
(a)
The following documents are filed as part of this report:

1.      Financial Statements:
 
Reference is made to Part II, Item 8, for a listing of required financial statements filed with this report
32

 
2.      Financial Statement Schedules:

 
Financial statement schedules are omitted because they are not applicable or the required information is included in the accompanying consolidated financial statements or notes thereto.

3.      Exhibits:

(3)
Articles of Incorporation and Bylaws
(3.1)
Registrant’s Restated Articles of Incorporation of Key Technology, Inc. (as of May 6, 2008) (filed as Exhibit 3.1 to the Form 10-Q filed with the Securities and Exchange Commission on May 9, 2008 and incorporated herein by reference)
(3.2)
Registrant’s Amended and Restated Bylaws (as amended through May 13, 2009)
(4)
Instruments defining the rights of security holders, including indentures
(4.1)
Registrant’s Second Amended and Restated Rights Agreement, dated as of November 13, 2007, between the Registrant and American Stock Transfer & Trust Company (filed as Exhibit 10.1 to the Form 8-K filed with the Securities and Exchange Commission on November 19, 2007 and incorporated herein by reference)
(10)
Material contracts
(10.1)*
Restated 1996 Employee Stock Purchase Plan (including Amendment No. 1) (filed as Exhibit 10.1 to the Form 10-Q filed with the Securities and Exchange Commission on May 12, 2006 and incorporated herein by reference)
(10.2)*
2003 Restated Employees’ Stock Incentive Plan (as approved by the shareholders of the Company on February 6, 2008) (filed as Exhibit 10.1 to the Form 8-K filed with the Securities and Exchange Commission on April 28, 2008 and incorporated herein by reference)
(10.3)
Loan Agreement, dated December 10, 2008, between Registrant and Bank of America, N.A. (filed as Exhibit 10.1 to the Form 8-K filed with the Securities and Exchange Commission on December 22, 2008 and incorporated herein by reference)
(10.4)
Amendment No. 1 to Loan Agreement, dated February 16, 2009, between Registrant and Bank of America, N.A. (filed as Exhibit 10.9 to the Form 10-K filed with the Securities and Exchange Commission on December 11, 2009 and incorporated herein by reference)
(10.5)
Amendment No. 2 to Loan Agreement, dated September 30, 2009, between Registrant and Bank of America, N.A. (filed as Exhibit 10.1 to the Form 8-K filed with the Securities and Exchange Commission on October 9, 2009 and  incorporated herein by reference)

65


(10.6)*
Form of Restricted Stock Bonus Agreement (Continued Employment Vesting) (filed as Exhibit 10.11 to the Form 10-K filed with the Securities and Exchange Commission on December 11, 2009 and incorporated herein by reference)
(10.7)*
Form of Restricted Stock Bonus Agreement (Performance Vesting) (filed as Exhibit 10.12 to the Form 10-K filed with the Securities and Exchange Commission on December 11, 2009 and incorporated herein by reference)
(10.8)*
Form of Restricted Stock Bonus Agreement (Three-Year Performance Vesting) (filed as Exhibit 10.13 to the Form 10-K filed with the Securities and Exchange Commission on December 11, 2009 and incorporated herein by reference)
(10.9)*
2010 Equity Incentive Plan (as approved by the shareholders of the Company on February 11, 2011) (filed as Appendix A to the Company’s Proxy Statement on Schedule 14A filed with the Securities and Exchange Commission on January 3, 2011 and incorporated herein by reference)
(10.10)
Credit Agreement effective December 23, 2010 between Registrant and ABN AMRO Bank N.V. dated January 31, 2011 (filed as Exhibit 10.1 to the Form 10-Q filed with the Securities and Exchange Commission on February 9, 2011 and incorporated herein by reference)
(10.11)
Amendment No. 3 to Loan Agreement, dated September 30, 2009, between Registrant and Bank of America, N.A. (filed as Exhibit 10.1 to the Form 8-K filed with the Securities and Exchange Commission on April 29, 2011 and incorporated herein by reference)
(10.12)
Share Purchase Agreement dated February 24, 2013 between Key Technology, Inc., Key Technology Holdings USA LLC and Visys N.V. (filed as Exhibit 10.1 to the Form 8-K filed with the Securities and Exchange Commission on February 24, 2013 and incorporated herein by reference)
(10.13)
Amendment No. 4 to Loan Agreement, dated February 12, 2013, between Registrant and Bank of America, N.A. (filed as Exhibit 10.1 to the Form 10-Q filed with the Securities and Exchange Commission on May 9, 2013 and incorporated herein by reference)
(10.14)
Credit Agreement between Visys NV and KBC Bank NV, dated October 7, 2004 (filed as Exhibit 10.2 to the Form 10-Q filed with the Securities and Exchange Commission on May 9, 2013 and incorporated herein by reference)
(10.15)
Amendment No. 5 to Loan Agreement, dated May 28, 2013, between Registrant and Bank of America, N.A. (filed as Exhibit 10.1 to the Form 10-Q filed with the Securities and Exchange Commission on August 9, 2013 and incorporated herein by reference)

(14)
Registrant’s amended Code of Business Conduct and Ethics, dated November 19, 2008 (filed as Exhibit 14.1 to the Form 8-K filed with the Securities and Exchange Commission on November 21, 2008 and incorporated herein by reference)
(21)
List of Subsidiaries
(23.1)
Consent of Independent Registered Public Accounting Firm
(31.1)
Certification pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
(31.2)
Certification pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
(32.1)
Certification pursuant to 18 U.S.C. Section 1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
(32.2)
Certification pursuant to 18 U.S.C. Section 1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

66


(101)
The following materials from Key Technology, Inc.’s Annual Report on Form 10-K for the year ended September 30, 2013, formatted in XBRL (eXtensible Business Reporting Language); (i) Consolidated Balance Sheets at September 30, 2013 and September 30, 2012, (ii) Consolidated Statements of Operations for the three years ended September 30, 2013, (iii) Consolidated Statements of Comprehensive Income for the three years ended September 30, 2013; (iv)  Consolidated Statements of Shareholders’ Equity for the three years ended September 30, 2013, (v) Consolidated Statements of Cash Flows for the three years ended September 30, 2013, and (vi) Notes to Consolidated Financial Statements for the three years ended September 30, 2013.**
       _______________________________________________
 
* Management contract or compensatory plan or arrangement.

**Pursuant to Rule 406T of Regulation S-T, the Interactive Data Files in Exhibit 101 hereto are deemed not filed or part of a registration statement or prospectus for purposes of Sections 11 or 12 of the Securities Act of 1933, as amended, are deemed not filed for purposes of Section 18 of the Securities Exchange Act of 1934, as amended, and otherwise are not subject to liability under those sections.


67


SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.


 
KEY TECHNOLOGY, INC.
 
 
 
 
By:
/s/  John J. Ehren
 
 
John J. Ehren
 
 
President and Chief Executive Officer
 
 
(Principal Executive Officer)

 
By:
/s/  Jeffrey T. Siegal
 
 
Jeffrey T. Siegal
 
 
Vice President and Chief Financial Officer
 
 
(Principal Financial and Accounting Officer)


December 13, 2013


Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.


/s/  Charles H. Stonecipher
 
December 13, 2013
Charles H. Stonecipher, Chairman
 
 
 
 
 
/s/  John E. Pelo
 
December 13, 2013
John E. Pelo, Director
 
 
 
 
 
/s/  Richard Lawrence
 
December 13, 2013
Richard Lawrence, Director
 
 
 
 
 
/s/  Michael L. Shannon
 
December 13, 2013
Michael L. Shannon, Director
 
 
 
 
 
/s/  Donald A. Washburn
 
December 13, 2013
Donald A. Washburn, Director
 
 
 
 
 
/s/  John J. Ehren
 
December 13, 2013
John J. Ehren, Director
 
 
 
 
 
/s/  Frank L. A. Zwerts
 
December 13, 2013
Frank L. A. Zwerts, Director
 
 


68


KEY TECHNOLOGY, INC.
 
FORM 10-K
INDEX OF ATTACHED EXHIBITS

EXHIBIT
NUMBER
21
List of Subsidiaries
23.1
Consent of Independent Registered Public Accounting Firm
31.1
Certification pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
31.2
Certification pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
32.1
Certification pursuant to 18 U.S. C. Section 1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
32.2
Certification pursuant to 18 U.S. C. Section 1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
101
The following materials from Key Technology, Inc.’s Annual Report on Form 10-K for the year ended September 30, 2013, formatted in XBRL (eXtensible Business Reporting Language); (i) Consolidated Balance Sheets at September 30, 2013 and September 30, 2012, (ii) Consolidated Statements of Operations for the three years ended September 30, 2013, (iii) Consolidated Statements of Comprehensive Income for the three years ended September 30, 2013, (iv)  Consolidated Statements of Shareholders’ Equity for the three years ended September 30, 2013, (v) Consolidated Statements of Cash Flows for the three years ended September 30, 2013, and (vi) Notes to Consolidated Financial Statements for the three years ended September 30, 2013.*
 
*Pursuant to Rule 406T of Regulation S-T, the Interactive Data Files on Exhibit 101 hereto are deemed not filed or part of a registration statement or prospectus for purposes of Sections 11 or 12 of the Securities Act of 1933, as amended, are deemed not filed for purposes of Section 18 of the Securities Exchange Act of 1934, as amended, and otherwise are not subject to liability under those sections.


69