Form 10-K

2011

 

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

 

FORM 10-K

 

x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the fiscal year ended December 31, 2011

      Commission file number 1-4119

OR

 

¨ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from              to             

 

 

NUCOR CORPORATION

(Exact name of registrant as specified in its charter)

 

Delaware   13-1860817

(State or other jurisdiction of

Incorporation or organization)

 

(I.R.S. Employer

Identification No.)

1915 Rexford Road, Charlotte, North Carolina   28211
(Address of principal executive offices)   (Zip Code)

Registrant’s telephone number, including area code:(704) 366-7000

Securities registered pursuant to Section 12(b) of the Act:

 

Title of each class

 

Name of each exchange on which registered

Common stock, par value $0.40 per share   New York Stock Exchange

Securities registered pursuant to Section 12(g) of the Act:

None

 

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  x    No  ¨

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in the definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

 

Large accelerated filer   x    Accelerated filer   ¨
Non-accelerated filer   ¨    Smaller reporting company   ¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  x

Aggregate market value of common stock held by non-affiliates was approximately $13.09 billion based upon the closing sales price of the registrant’s common stock on the last day of our most recently completed second fiscal quarter, July 2, 2011.

316,887,937 shares of common stock were outstanding at February 17, 2012.

 

 

Documents incorporated by reference include: Portions of 2011 Annual Report (Parts I, II and IV), and Notice of 2012 Annual Meeting of Stockholders and Proxy Statement (Part III) to be filed within 120 days after Nucor’s fiscal year end.

 

 

 


Nucor Corporation

Table of Contents

 

PART I        
   Item 1      Business    1
   Item 1A      Risk Factors    8
   Item 1B      Unresolved Staff Comments    13
   Item 2      Properties    14
   Item 3      Legal Proceedings    15
   Item 4      Mine Safety Disclosures    15
   Executive Officers of the Registrant    16
PART II        
   Item 5      Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities    18
   Item 6      Selected Financial Data    18
   Item 7      Management’s Discussion and Analysis of Financial Condition and Results of Operations    18
   Item 7A      Quantitative and Qualitative Disclosures about Market Risk    18
   Item 8      Financial Statements and Supplementary Data    19
   Item 9      Changes in and Disagreements with Accountants on Accounting and Financial Disclosure    19
   Item 9A      Controls and Procedures    20
   Item 9B      Other Information    20
PART III        
   Item 10      Directors, Executive Officers and Corporate Governance    20
   Item 11      Executive Compensation    20
   Item 12      Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters    21
   Item 13      Certain Relationships and Related Transactions, and Director Independence    21
   Item 14      Principal Accountant Fees and Services    21
PART IV        
   Item 15      Exhibits and Financial Statement Schedules    21
SIGNATURES    26
Index to Financial Statement Schedule    28

 

i


PART I

 

Item 1. Business

Overview

Nucor Corporation and its affiliates (“Nucor” or the “Company”) manufacture steel and steel products. The Company also produces direct reduced iron (“DRI”) for use in the Company’s steel mills. Through The David J. Joseph Company and its affiliates (“DJJ”), which the Company acquired in 2008, the Company also processes ferrous and nonferrous metals and brokers ferrous and nonferrous metals, pig iron, hot briquetted iron (“HBI”) and DRI. Most of the Company’s operating facilities and customers are located in North America, but increasingly, Nucor is doing business outside of North America as well. The Company’s operations include several international trading companies that buy and sell steel and steel products manufactured by the Company and others.

Nucor is North America’s largest recycler, using scrap steel as the primary raw material in producing steel and steel products. In 2011, we recycled approximately 19.7 million tons of scrap steel.

General Development of our Business in Recent Years

Nucor has employed a multi-pronged growth strategy in recent years that allows for flexibility and the ability to capitalize on growth opportunities as they arise. The five prongs of that growth strategy are: (1) optimizing existing operations, (2) executing on our raw materials strategy, (3) growing through developing greenfield projects that capitalize on new technologies and unique marketplace opportunities, (4) acquiring other companies that will strengthen Nucor’s position as North America’s most diversified producer of steel and steel products and (5) growing internationally with an emphasis on leveraging strategic partnerships and new technologies.

Optimizing our existing operations has primarily involved targeting a significant portion of our capital expenditures each year on projects that enhance productivity and efficiency as well as allow us to produce products that move us up the value chain at our existing facilities. The heat treat line at our Hertford County, North Carolina mill became operational in 2010, which has allowed Nucor to grow its presence in higher margin products where higher strength and abrasion resistance is required. The heat treat line has also allowed us to improve the product mix allocation between our two plate mills and four sheet mills to improve margins at those facilities. Nucor has announced plans to spend approximately $290 million for projects at our Tennessee, Nebraska, and South Carolina bar mills that will expand Nucor’s special bar quality (“SBQ”) and wire rod capacity by one million tons. The projects, which we project will be completed by the end of 2013, will allow us to meet the needs of our engineered bar customers in the attractive automotive, energy, heavy truck and heavy equipment markets. Other planned value-added projects at existing operations include a vacuum degasser at our Hickman, Arkansas mill and a new mill stand and other modifications that will allow us to produce wider and lighter gauge hot-rolled steel at our Berkeley, South Carolina mill.

Executing on our raw materials strategy involves putting the pieces into place to meet our goal of controlling between six and seven million tons of annual capacity in high quality scrap substitutes. We have begun construction on our 2,500,000 tons-per-year DRI facility in St. James Parish, Louisiana. The majority of the equipment for this $750 million project will begin arriving in 2012, and start-up is currently projected to be in mid-2013. Between our existing DRI plant in Trinidad, which we have expanded to increase the annual capacity from 1,800,000 to 2,000,000 metric tons, and our facility in St. James Parish, Louisiana, we will be approximately two-thirds of the way towards that goal.

 

1


Growing through greenfield projects has included the construction of our SBQ steel mill in Memphis, Tennessee, which we completed in 2009. We also began commercial production in 2009 at a new facility in Blytheville, Arkansas, which uses breakthrough Castrip® technology to strip cast molten steel into near final shape and thickness with minimal hot or cold rolling. This allows for lower investment and operating costs and reduces the environmental impact of producing steel.

The pace at which we have been acquiring other companies slowed dramatically in late 2008, but in the preceding four years we completed numerous acquisitions. Since late 2006 our annual capacity to produce downstream value-added products has more than doubled to over 4.6 million tons through acquisitions of a steel decking producer, fabricators of rebar, cold finished bars and steel grating, a manufacturer of metal buildings and a wire mesh fabricator. The acquisition of DJJ in the spring of 2008 was a key part of our strategy to better manage the supply of ferrous scrap metal, the primary raw material used by our electric arc furnace steel mills.

In 2010, we entered into an agreement with Mitsui & Co. (U.S.A.) to form NuMit LLC, in which we own a 50% economic and voting interest. NuMit LLC owns 100% of the equity interest in Steel Technologies LLC, which operates 25 sheet processing facilities located throughout the United States, Canada and Mexico.

In 2008 we grew internationally by entering into a joint investment with Duferco S.A., Duferdofin Nucor S.r.l., which operates a one million tons-per-year steel melt shop with a bloom billet caster in Brescia, Italy and three rolling mills located throughout Italy. The customers for the products produced by Duferdofin Nucor S.r.l. are primarily steel service centers and distributors located both in Italy and throughout Europe.

Segments

Nucor reports its results in three segments: steel mills, steel products and raw materials. Net sales to external customers, intercompany sales, depreciation expense, amortization expense, earnings (loss) before income taxes and noncontrolling interests, assets and capital expenditures by segment for each of the three fiscal years in the three-year period ended December 31, 2011 are set forth in Note 22 of the Notes to Consolidated Financial Statements included in Nucor’s 2011 Annual Report, which is hereby incorporated by reference. The steel mills are Nucor’s dominant segment representing approximately 70% of the Company’s sales to external customers in the fiscal year ended December 31, 2011.

Principal Products Produced

In the steel mills segment, Nucor produces sheet steel (hot and cold-rolled), plate steel, structural steel (wide-flange beams, beam blanks and sheet piling) and bar steel (blooms, billets, concrete reinforcing bar, merchant bar and SBQ). Nucor manufactures steel principally from scrap steel and scrap steel substitutes using electric arc furnaces, continuous casting and automated rolling mills. In the steel products segment, Nucor produces steel joists and joist girders, steel deck, fabricated concrete reinforcing steel, cold finished steel, steel fasteners, metal building systems, light gauge steel framing, steel grating and expanded metal, and wire and wire mesh. In the raw materials segment, the Company produces DRI; brokers ferrous and nonferrous metals, pig iron, HBI and DRI; supplies ferro-alloys; and processes ferrous and nonferrous scrap metal.

 

2


Markets and Marketing

The steel mills segment sells its products primarily to steel service centers, fabricators and manufacturers located throughout the United States, Canada, Mexico and, increasingly, elsewhere in the world. Nucor produces hot-rolled and cold-rolled sheet steel in standard grades and to customers’ specifications while maintaining inventories to fulfill anticipated orders. In 2011, approximately 50% of our sheet steel sales were to contract customers, while steel contract sales outside of our sheet operations are not significant. The proportion of tons sold to contract customers depends on a variety of factors. These factors include our consideration of current and future market conditions, our strategy to appropriately balance spot and contract tons to maximize profitability, our desire to sustain a diversified customer base, and our end-use customers’ perceptions about future market conditions. These sheet sales contracts permit price adjustments to reflect changes in prevailing raw material costs and typically have terms ranging from six to twelve months. The balance of our sheet steel sales was in the spot market at prevailing prices at the time of sale.

Our plate, structural, reinforcing and merchant bar steel come in standard sizes and grades, whereby we maintain inventory levels to meet our customers’ expected orders. In addition, our bar mill group manufactures hot-rolled SBQ products to exacting specifications primarily servicing the automotive, energy, agricultural, heavy equipment and transportation sectors. Almost all of our plate, structural, and bar steel sales occur in the spot market at prevailing market prices.

In 2011, approximately 86% of the production by our steel mills segment was sold to external customers. The balance of the steel mill segment’s production went to our downstream joist, deck, rebar fabrication, fastener, metal buildings and cold finish operations.

In the steel products segment, we sell steel joists and joist girders, and steel deck to general contractors and fabricators located throughout the United States. We make these products to the customers’ specifications and do not maintain inventories of these finished steel products. The majority of these contracts are firm, fixed-price contracts that are in most cases competitively bid against other suppliers. Longer term supply contracts may permit us to adjust our prices to reflect changes in prevailing raw materials costs. We sell fabricated reinforcing products only on a construction contract bid basis. These products are used by contractors in constructing highways, bridges, reservoirs, utilities, hospitals, schools, airports, stadiums and high-rise buildings. We manufacture cold finished steel, steel fasteners, steel grating, wire and wire mesh in standard sizes and maintain inventories of these products to fulfill anticipated orders. We sell cold finished steel and steel fasteners primarily to distributors and manufacturers located throughout the United States and Canada.

We market products from the steel mills and steel products segments mainly through in-house sales forces. The markets for these products are tied to capital and durable goods spending and are affected by changes in general economic conditions.

In the raw materials segment, the Company processes ferrous and nonferrous scrap metal for use in Nucor’s steel mills and for sale to various domestic and international external customers. The Company also brokers ferrous and nonferrous metals and scrap substitutes, supplies ferro-alloys, and provides transportation, material handling and other services to users of scrap metals. The primary external customers for ferrous scrap are electric arc furnace steel mills and foundries that use ferrous scrap as a raw material in their manufacturing process. External customers purchasing nonferrous scrap metal include aluminum can producers, secondary aluminum smelters, steel mills and other processors and consumers of various nonferrous metals. We market scrap metal products and related services to our external customers through in-house sales forces. In 2011, approximately 12% of the ferrous and nonferrous metals and scrap substitutes tons processed and sold by the raw materials segment were sold to external customers.

 

3


The Company’s other operations include international trading companies that buy and sell steel and steel products that Nucor and other steel producers have manufactured.

Backlog

In the steel mills segment, Nucor’s backlog of orders was approximately $1.80 billion and $1.64 billion at December 31, 2011 and 2010, respectively. Nucor’s backlog of orders in the steel products segment was approximately $1.11 billion and $1.02 billion at December 31, 2011 and 2010, respectively. Order backlogs for the steel mills segment include orders attributable to Nucor’s downstream businesses. The majority of these orders will be filled within one year. Order backlog within our raw materials segment is not significant because the majority of the raw materials that segment produces are used by internal divisions.

Sources and Availability of Raw Materials

The primary raw materials for our steel mills segment are ferrous scrap and scrap substitutes such as pig iron, DRI and HBI. On average, it takes approximately 1.1 tons of scrap and scrap substitutes to produce a ton of steel. As of December 31, 2011, DJJ operated over 60 scrap yards, and the Company’s annual scrap processing capability was approaching five million tons. DJJ acquires ferrous scrap from numerous sources including manufacturers of products made from steel, industrial plants, scrap dealers, peddlers, auto wreckers and demolition firms. We purchase pig iron as needed from a variety of sources. Nucor operates a DRI plant in Trinidad with a capacity of 1,800,000 metric tons of DRI annually. An expansion project has now increased the capacity to 2,000,000 metric tons annually. The primary raw material for our DRI facility in Trinidad is iron ore, which we purchase from various international suppliers. A second DRI facility in Louisiana with an annual capacity of 2,500,000 tons is under construction. This Louisiana DRI facility is the first phase of a multi-phase plan that may include an additional DRI facility, a coke plant, a blast furnace, a pellet plant and a steel mill.

In 2010, Nucor entered into an agreement with a natural gas exploration and production firm that involves drilling and completing onshore natural gas wells in U.S.-based proven reserves over a seven-year period that began in June 2010. Natural gas generated by this working interest drilling program is being sold to offset our exposure to the volatility of the price of gas consumed by our Louisiana DRI facility. Revenues from natural gas generated by this working interest drilling program are a small but increasing amount, and all natural gas is being sold to outside parties.

The primary raw material for our steel products segment is steel produced by Nucor’s steel mills.

DJJ generally purchases ferrous and nonferrous scrap for sale to external customers from the same variety of sources it purchases ferrous scrap for use as a raw material in Nucor’s steel mills. DJJ does not purchase a significant amount of scrap metal from a single source or from a limited number of major sources. The availability and price of ferrous scrap are affected by changes in the global supply and demand for steel and steel products. Ferrous scrap and scrap substitutes are our single largest cost of products sold. A key part of our business strategy is to control a significant portion of the supply of high quality metallics needed to operate our steel mills.

 

4


Energy Consumption and Costs

Our steel mills are large consumers of electricity and natural gas. Our DRI facility in Trinidad is, and the DRI facility we are currently constructing in Louisiana will be, large consumers of natural gas. Consequently, we use a variety of strategies to manage our exposure to price risk of natural gas, including cash flow hedges and a working interest agreement with a leading natural gas production firm to drill on-shore natural gas wells in the United States.

Historically, manufacturers in the United States have benefitted from relatively stable and competitive energy costs that have allowed them to compete on an equal footing in the increasingly global marketplace. The availability and prices of electricity and natural gas are influenced today, however, by many factors including changes in supply and demand, advances in drilling technology and increasingly, by changes in public policy relating to energy production and use. Because energy is such a significant cost of products sold for Nucor, we are continually striving to make our operations in all three of our business segments more energy efficient. We also closely monitor developments in public policy relating to energy production and consumption. When appropriate, we work to shape those developments in ways that we believe will allow us to continue to be a competitive producer of steel and steel products in an increasingly competitive global market place.

Competition

We compete in a variety of steel and metal markets, including markets for finished steel products, unfinished steel products, and raw materials. These markets are highly competitive with many domestic and foreign firms participating, and, as a result of this highly competitive environment, we find that we primarily compete on price and service.

Our electric-arc furnace steel mills face many different forms of competition, including integrated steel producers (who use iron ore converted into liquid form in a blast furnace as their basic raw material instead of scrap steel), other electric-arc furnace mills, foreign imports and alternative materials. Our unfinished and finished steel products face domestic competition from both integrated steel producers and other electric-arc furnace mills. Large integrated steel producers have the ability to manufacture a wide variety of products but face significantly higher energy costs and are often burdened with higher capital and fixed operating costs. Electric-arc furnace mill producers such as Nucor are sensitive to increases in scrap prices but tend to have lower capital and fixed operating costs compared with integrated steel producers.

Recently we have experienced increased competition in the U.S. sheet steel market stemming from significant capacity increases. Since the beginning of 2010, domestic sheet capacity has increased by approximately 5,000,000 tons as a result of the opening of a new sheet facility in Alabama, capacity additions at existing sheet mills, and the reopening of a previously shuttered sheet mill in Maryland.

Competition from foreign steel and steel product producers presents unique challenges for us. Imported steel and steel products often benefit from government subsidies, either directly or indirectly through government-owned enterprises or government-owned or controlled financial institutions. Foreign imports accounted for approximately 22% of the U.S. steel market in 2011. In particular, competition from steel imported from China, which accounts for more than 40% of the steel produced annually in the world, is a major challenge. Chinese producers, many of which are government-owned in whole or in part, continue to benefit from their government’s manipulation of foreign currency exchange rates and from the receipt of government subsidies, which allows them to sell their products below cost. These distorting trade practices are not only widely recognized as being unfair but also have been challenged

 

5


successfully in some recent instances as violating world trade rules. Examples of successful challenges include the imposition of antidumping duty orders on imports of line pipe, oil country tubular goods, rebar, cut-to-length plate and hot rolled sheet from China.

China’s unfair trade practices seriously undermine the ability of the Company and other domestic producers to compete on price when left unchallenged. That country’s artificially lowered production costs have significantly contributed to the exodus of manufacturing jobs from the United States. When such a flight occurs, Nucor’s customer base is diminished, thereby providing us with fewer opportunities to supply steel to those shuttered businesses. Rigorous trade law enforcement is critical to our ability to maintain our competitive position against foreign producers that engage in unlawful trade practices. Nucor has been active in calling on policymakers to enforce global trade agreements and address the jobs crisis in the United States. Numerous downstream consumers of steel are also taking action against unfairly traded Chinese imports, as demonstrated by recently filed cases on steel wheels and wind towers from China.

We also experience competition from other materials. Depending on our customers’ end use of our products, there are sometimes other materials, such as concrete, aluminum, plastics, composites and wood that compete with our steel products. When the price of steel relative to other raw materials rises, these alternatives become more attractive to our customers.

Competition in our scrap and raw materials business is also vigorous. The scrap metals market consists of many firms and is highly fragmented. Firms typically compete on price and geographic proximity to the sources of scrap metal.

Environmental Laws and Regulations

Our business operations are subject to numerous federal, state and local laws and regulations intended to protect the environment. The principal federal environmental laws include the Clean Air Act (“CAA”) that regulates air emissions; the Clean Water Act (“CWA”) that regulates water discharges; the Resource Conservation and Recovery Act (“RCRA”) that addresses solid and hazardous waste treatment, storage and disposal; and the Comprehensive Environmental Response, Compensation and Liability Act (“CERCLA”) that governs releases of, and remediation of sites contaminated by, hazardous substances. The states in which our operations are located also have state laws and regulations that are patterned on these and other federal laws.

We believe that we are in substantial compliance with the provisions of all federal and state environmental laws and regulations applicable to our business operations. Both federal and state laws and regulations are becoming increasingly stringent however, making compliance with them increasingly expensive and burdensome. In many instances the total costs of compliance are not readily quantifiable because compliance is so engrained in our operating philosophy that these costs are simply considered part of our standard operating procedures.

The United States Environmental Protection Agency (“USEPA”) has proposed or promulgated many new national ambient air quality standards and toxic air emissions rules for which it has not yet issued guidance or compliance deadlines. While we begin immediately to plan for compliance with such standards and rules, we cannot fully assess their impact on our operations until the guidance has been fully developed and issued and compliance deadlines have been established. In other cases where environmental regulations are proposed or promulgated that may regulate previously unregulated aspects of our operations, it is impossible for us to fully determine the impact of these regulations until protracted legal challenges have been concluded and USEPA or other regulatory agencies have developed and issued

 

6


technical guidance. Despite this atmosphere of regulatory uncertainty, at this time we do not believe that compliance with these new environmental regulations will have a material adverse effect on our results of operations, cash flows or financial condition.

The CAA imposes stringent limits on air emissions with a federally mandated operating permit program administered by the states with civil and criminal enforcement sanctions. Each of our steel mills is required to operate in compliance with its permit or potentially incur sanctions for failing to do so. The DRI facility we are constructing in Louisiana was permitted under the CAA in January 2011. This permit included an evaluation and determination of Best Available Control Technology (“BACT”) for USEPA’s new “Greenhouse Gasses” (“GHGs”) rule. Because of the size of our steelmaking operations, they are also subject to these new GHG regulations and will be required to do GHG BACT evaluations if their permits are modified in the future. There is still a great deal of uncertainty and very little guidance from USEPA as to what is or may be considered GHG BACT for steelmaking operations. Our operations are properly permitted, and we will not need to make these determinations unless and until their permits are modified. Based on current guidance, we do not expect these requirements to have a material adverse effect on our results of operations, cash flows or financial condition.

Nucor uses electric arc furnaces (“EAF”) to recycle scrap metal into new steel products. These EAFs use electricity as their primary source of energy. As the new GHG regulations, air toxics rules and other new environmental regulations are imposed on electric utilities, it is reasonable to expect that the cost of electricity produced by these utilities will increase. See Item 1A “Risk Factors” for more information about the potential impact of GHG regulations on Nucor’s business.

The CWA regulates water discharges and withdrawals. Nucor maintains discharge and withdrawal permits as appropriate at its facilities under the national pollutant discharge elimination system program of the CWA and conducts its operations in compliance with those permits. Nucor also maintains permits from local governments for the discharge of water into publicly owned treatment works where available.

RCRA establishes standards for the management of solid and hazardous wastes. RCRA also addresses the environmental impact of contamination from waste disposal activities and from recycling of and storage of most wastes. While Nucor believes it is in substantial compliance with these regulations, past waste disposal activities that were legal when conducted but now may pose a contamination threat are periodically discovered. These and off-site properties that USEPA has determined are contaminated, for which Nucor may be potentially responsible at some level, are quickly evaluated and corrected. While Nucor has conducted and is in the final stages of completing some cleanups under RCRA, these liabilities are either already identified and being resolved or have been fully resolved and Nucor is in receipt of no further action letters from the appropriate regulatory agency.

Because Nucor long ago implemented environmental practices that have resulted in the responsible disposal of waste materials, Nucor is also not presently considered a major contributor to any major cleanups under CERCLA for which Nucor has been named a potentially responsible party. Nucor continually evaluates these types of potential liabilities and, if appropriate, maintains reserves sufficient to remediate the identified liabilities. Under RCRA, private citizens may also bring an action against the operator of a regulated facility for potential damages and payment of cleanup costs. Nucor is confident that its system of internal evaluation and due diligence has sufficiently identified these types of potential liabilities so that compliance with these regulations will not have a material adverse effect on our results of operations, cash flows or financial condition beyond that already reflected in the reserves established for them.

 

7


The primary raw material of Nucor’s steelmaking operations is scrap metal. The process of recycling scrap metal brings with it many contaminants such as paint, zinc, chrome and other metals that produce air emissions which are captured in Nucor emission control equipment. This filtrant (EAF dust) is classified as a listed hazardous waste under the RCRA. Because these contaminants contain valuable metals, this filtrant is recycled to recover those metals. Nucor sends all but a small fraction of the EAF dust it produces to recycling facilities that recover the zinc, lead, chrome and other valuable metals from this dust. By recycling this material, Nucor is not only acting in a sustainable, responsible manner but is also substantially limiting its potential for future liability under both CERCLA and RCRA.

Nucor operates an aggressive and sustainable environmental program that incorporates the concept of individual employee as well as management responsibility for environmental performance. All of Nucor’s steelmaking operations are ISO 14001 certified. Achieving ISO 14001 certification means that each of Nucor’s steel mills has put an environmental management system in place with measurable targets and objectives, such as reducing the use of oil and grease and minimizing electricity use, and has implemented site-wide recycling programs. These environmental management systems make environmental commitment each Nucor teammate’s responsibility. Nucor’s environmental program maintains a high level of training, commitment, outreach and visibility.

Capital expenditures at our facilities that are associated with environmental regulation compliance for 2012 and 2013 are estimated to be less than $100 million per year.

Employees

Nucor has a simple, streamlined organizational structure to allow our employees to make quick decisions and be innovative. Our organization is highly decentralized, with most day-to-day operating decisions made by our division general managers and their staff. Less than 100 employees are located in our executive office. The majority of Nucor’s 20,800 employees are not represented by labor unions.

Available Information

Nucor’s annual report on Form 10-K, quarterly reports on Form 10-Q, Current Reports on Form 8-K, and all amendments to these reports, are available on our website at www.nucor.com, as soon as reasonably practicable after Nucor files these reports electronically with, or furnishes them to, the Securities and Exchange Commission (“SEC”). Except as otherwise stated in these reports, the information contained on our website or available by hyperlink from our website is not incorporated into this Annual Report on Form 10-K or other documents we file with, or furnish to, the SEC.

 

Item 1A. Risk Factors

Many of the factors that affect our business and operations involve risk and uncertainty. The factors described below are some of the risks that could materially negatively affect our business, financial condition and results of operations.

Recovery from the global recession and credit crisis has and likely will continue to adversely affect our business.

The sluggish pace of the recovery from the deep global recession that began in the United States in December 2007 and officially ended in June 2009 is continuing to have an adverse effect on demand for our products and consequently the results of our operations, financial condition and cash flows. In addition, uncertainties in Europe regarding the financial sector and sovereign debt and the potential impact on banks in other regions of the world will continue to weigh on global and domestic growth.

 

8


Although domestic credit markets have largely stabilized from the height of the financial crisis in the fourth quarter of 2008 and the first half of 2009, the effects of the financial crisis continue to present additional risks to us, our customers and suppliers. In particular, there is no guarantee that the credit markets or liquidity will not once again be restricted. Additionally, stricter lending standards have made it more difficult for some firms to access the credit markets. Although we believe we have adequate access to several sources of contractually committed borrowings and other available credit facilities, these risks could temporarily restrict our ability to borrow money on acceptable terms in the credit markets and potentially could affect our ability to draw on our credit facility. In addition, restricted access to the credit markets is also continuing to make it difficult or, in some cases, impossible for our customers to borrow money to fund their operations. Lack of, or limited access to, capital would adversely affect our customers’ ability to purchase our products or, in some cases, to pay for our products on a timely basis.

Long-term unemployment for those unemployed for more than six months remains at historically high levels and the housing market and non-residential construction market remain depressed. High unemployment and a weak housing market have an impact on downstream demand for many of our products. Additionally, non-residential construction, including publicly financed state and municipal projects, has slowed significantly due to overcapacity of commercial properties and the reluctance of state and local governments to borrow to spend on capital projects when faced with stagnant or declining tax revenues and increased operating costs.

Our industry is cyclical and both recessions and prolonged periods of slow economic growth could have a material adverse effect on our business.

Demand for most of our products is cyclical in nature and sensitive to general economic conditions. Our business supports cyclical industries such as the commercial construction, energy, appliance and automotive industries. As a result, downturns in the United States economy or any of these industries could materially adversely affect our results of operations, financial condition and cash flows. The global economic recession of 2008/2009 and subsequent anemic economic recovery period, coupled with the lingering effects of the global financial and credit market disruptions, have had a historic negative impact on the steel industry and Nucor. These events contributed to an unprecedented decline in pricing for steel and steel products, weak end-markets and continued depressed demand, resulting in extraordinary volatility in our financial results since the last up-cycle. In 2009, we reported a net loss of $293.6 million, the first in the Company’s history. We returned to profitability in 2010 and 2011, reporting net income of $134.1 million and $778.2 million, respectively. However, the economic outlook remains uncertain both in the United States and globally. While we believe that the long-term prospects for the steel industry remain bright, we are unable to predict the duration of the depressed economic conditions that are contributing to reduced demand for our products. Future economic downturns or a prolonged slow-growth or stagnant economy could materially adversely affect our business, results of operations, financial condition and cash flows.

Overcapacity in the global steel industry could increase the level of steel imports, which may negatively affect our business, results of operations and cash flows.

Global steelmaking capacity exceeds global consumption of steel products. During periods of global economic weakness this overcapacity is amplified because of weaker global demand. This excess capacity often results in manufacturers in certain countries exporting significant amounts of steel and steel products at prices that are at or below their costs of production. In some countries the steel industry is subsidized or owned in whole or in part by the government, giving imported steel from those countries certain cost advantages. These imports, which are also affected by demand in the domestic market,

 

9


international currency conversion rates and domestic and international government actions, can result in downward pressure on steel prices, which could materially adversely affect our business, results of operations, financial condition and cash flows.

In particular, steel production in China, the world’s largest producer and consumer of steel, currently exceeds Chinese demand and in recent years the production growth rate has exceeded the growth rate of demand. This rising overcapacity in China has the potential to result in a further increase in imports of low-priced, unfairly traded steel and steel products to the United States that could put our steel products at a competitive disadvantage. A continuation of this unbalanced growth trend or a significant decrease in China’s rate of economic expansion could result in increasing steel exports from China.

The recent addition of new capacity and expansion or restarting of existing sheet steel production in the United States has exacerbated this issue domestically as well as globally.

Competition from other producers, imports or alternative materials may have a material adverse effect on our business.

We face strong competition from other steel producers and imports that compete with our products on price and service. The steel markets are highly competitive and a number of firms, domestic and foreign, participate in the steel and raw materials markets. Depending on a variety of factors, including raw materials, energy, labor and capital costs, government control of currency exchange rates and government subsidies of foreign steel producers, our business may be materially adversely affected by competitive forces.

In many applications, steel competes with other materials, such as concrete, aluminum, composites, plastic and wood. Increased use of these materials in substitution for steel products could have a material adverse effect on prices and demand for our steel products.

In 2011, automobile producers began taking steps towards complying with new Corporate Average Fuel Economy (“CAFE”) mileage requirements for new cars and light trucks that they produce. As automobile producers work to produce vehicles in compliance with these new standards, they may reduce the amount of steel in cars and trucks to improve fuel economy, thereby reducing demand for steel and resulting in further over-supply of steel in North America.

The results of our operations are sensitive to volatility in steel prices and the cost of raw materials, particularly scrap steel.

We rely to an extent on outside vendors to supply us with raw materials, including both scrap and scrap substitutes, that are critical to the manufacture of our products. Although we have vertically integrated our business by constructing our DRI facility in Trinidad and acquiring DJJ, we still must purchase most of our primary raw material, steel scrap, from numerous other sources located throughout the United States. Although we believe that the supply of scrap and scrap substitutes is adequate to operate our facilities, purchase prices of these critical raw materials are volatile and are influenced by changes in scrap exports in response to changes in the scrap demands of our global competitors. At any given time, we may be unable to obtain an adequate supply of these critical raw materials with price and other terms acceptable to us. The availability and prices of raw materials may also be negatively affected by new laws and regulations, allocation by suppliers, interruptions in production, accidents or natural disasters, changes in exchange rates, worldwide price fluctuations, and the availability and cost of transportation. Many countries that export steel into our markets restrict the export of scrap, protecting the supply chain of some foreign competitors. This trade practice creates artificial competitive advantage for foreign producers that could limit our ability to compete in the U.S. market.

 

10


If our suppliers increase the prices of our critical raw materials, we may not have alternative sources of supply. In addition, to the extent that we have quoted prices to our customers and accepted customer orders for our products prior to purchasing necessary raw materials, we may be unable to raise the price of our products to cover all or part of the increased cost of the raw materials, although we have successfully used a raw material surcharge in the steel mills segment since 2004. Also, if we are unable to obtain adequate and timely deliveries of our required raw materials, we may be unable to timely manufacture sufficient quantities of our products. This could cause us to lose sales, incur additional costs and suffer harm to our reputation.

Changes in the availability and cost of electricity and natural gas are subject to volatile market conditions that could adversely affect our business.

Our steel mills are large consumers of electricity and natural gas. In addition, our DRI facility is also a large consumer of natural gas. We rely upon third parties for our supply of energy resources consumed in the manufacture of our products. The prices for and availability of electricity, natural gas, oil and other energy resources are subject to volatile market conditions. These market conditions often are affected by weather, political and economic factors beyond our control, and we may be unable to raise the price of our products to cover increased energy costs. Disruptions in the supply of our energy resources could temporarily impair our ability to manufacture our products for our customers. Increases in our energy costs resulting from regulations that are not applicable across the entire steel market could materially adversely affect our business, results of operations, financial condition and cash flows.

Our steelmaking processes, and the manufacturing processes of many of our suppliers and customers, are energy intensive and generate carbon dioxide and other GHGs, and regulation of GHGs, through new regulations or legislation in an onerous form, could have a material adverse impact on our results of operations, financial condition and cash flows.

Carbon is an essential raw material in Nucor’s production processes. As a carbon steel producer, Nucor will be increasingly affected both directly and indirectly as GHG regulations are further implemented. Because Nucor’s steelmaking operations are subject to most of these new GHG regulations, we have already begun to feel the impact in the permit modification and reporting processes. Both GHG regulations and recently promulgated National Ambient Air Quality Standards (“NAAQS”), which are more restrictive than previous standards, make it significantly more difficult to obtain new permits and to modify existing permits. These same regulations have indirectly increased the costs to manufacture our products as they have increased the cost of energy, primarily electricity, which we use extensively in the steelmaking process. The discovery of new natural gas reserves utilizing the practice of horizontal drilling and “fracking” is dampening some of this indirect impact, as some utilities switch fuels to natural gas from coal thereby reducing their emissions significantly. To the extent that these regulations cause an increase in the cost of energy, they will have an impact on Nucor’s ability to compete.

The USEPA continues to press forward with new regulations that control GHG and other NAAQS pollutants. Most of these and other related regulations are already, or we expect will shortly be, challenged in court. Until all proposed GHG emission regulations are adopted in final form and all legal challenges to them, including the authority of the USEPA to adopt them, have been resolved, however, we cannot reliably estimate their impact on our financial condition, operating performance or ability to compete. Because some foreign steel producers will not be subject to these same indirect cost increases, our products could be at a further competitive disadvantage. In addition to increased costs of production, we could also incur costs to defend and resolve legal claims and other litigation related to GHG regulations and the alleged impact of our operations on climate change.

 

11


Environmental compliance and remediation could result in substantially increased costs and materially adversely impact our competitive position.

Our operations are subject to numerous federal, state and local laws and regulations relating to protection of the environment, and we, accordingly, make provision in our financial statements for the estimated costs of compliance. These laws are becoming increasingly stringent, resulting in inherent uncertainties in these estimates. To the extent that competitors, particularly foreign steel producers and manufacturers of competitive products, are not required to incur equivalent costs, our competitive position could be materially adversely impacted.

We plan to continue to implement our acquisition strategy and may encounter difficulties in integrating businesses we acquire.

We plan to continue to seek attractive opportunities to acquire businesses, enter into joint ventures and make other investments that are complementary to our existing strengths. Realizing the anticipated benefits of acquisitions or other transactions will depend on our ability to operate these businesses and integrate them with our operations and to cooperate with our strategic partners. Our business, results of operations, financial condition and cash flows could be materially adversely affected if we are unable to successfully integrate these businesses.

In addition, we may enter into joint ventures or acquisitions located outside the U.S., which may be adversely affected by foreign currency fluctuations, changes in economic conditions and changes in local government regulations and policies.

Our operations are subject to business interruptions and casualty losses.

The steelmaking business is subject to numerous inherent risks, particularly unplanned events such as explosions, fires, other accidents, natural or man-made disasters, acts of terrorism, inclement weather and transportation interruptions. While our insurance coverage could offset losses relating to some of those types of events, our results of operations and cash flows could be adversely impacted to the extent any such losses are not covered by our insurance.

Our business requires substantial capital investment and maintenance expenditures, and our capital resources may not be adequate to provide for all of our cash requirements.

Our operations are capital intensive. For the five-year period ended December 31, 2011, our total capital expenditures, excluding acquisitions, were approximately $2.73 billion. Our business also requires substantial expenditures for routine maintenance. Although we expect requirements for our business needs, including the funding of capital expenditures, debt service for financings and any contingencies, will be financed by internally generated funds or from borrowings under our $1.5 billion unsecured revolving credit facility, we cannot assure you that this will be the case. Additional acquisitions could require financing from external sources.

Changes in foreign currency may adversely affect our financial results.

Because of our international expansion efforts, we are increasingly exposed to changes in foreign exchange rates. Generally, each of our foreign operations both produces and sells in its local currency, limiting our exposure to foreign currency transactions. We monitor our exposures and, from time to time, may use forward currency contracts to hedge certain forecasted currency transactions. In addition to potential transaction losses, our reported results of operations and financial position could be negatively affected by exchange rates when the activities and balances of our foreign operations are translated into U.S. dollars for financial reporting purposes.

 

12


The accounting treatment of equity method investments, goodwill and other long-lived assets could result in future asset impairments, which would reduce our earnings.

We periodically test our equity method investments, goodwill and other long-lived assets to determine whether their estimated fair value is less than their value recorded on our balance sheet. The results of this testing for potential impairment may be adversely affected by the continuing uncertain market conditions for the steel industry, as well as changes in interest rates and general economic conditions. If we determine that the fair value of any of these long-lived assets is less than the value recorded on our balance sheet, we would likely incur a non-cash impairment loss that will negatively impact our results of operations.

Tax increases and changes in tax rules could adversely affect our financial results.

The steel industry and our business are sensitive to changes in taxes. As a company based in the U.S., Nucor is more exposed to the effects of changes in U.S. tax laws than some of our major competitors. Our provision for income taxes and cash tax liability in the future could be adversely affected by changes in U.S. tax laws. Potential changes that would adversely affect us include, but are not limited to, repealing LIFO (last-in, first-out treatment of inventory) and decreasing the ability of U.S. companies to receive a tax credit for foreign taxes paid or to defer the U.S. deduction of expenses in connection with investments made in other countries.

 

Item 1B. Unresolved Staff Comments

None.

 

13


Item 2. Properties

We own all of our principal operating facilities. These facilities, by segment, are as follows:

 

Location

   Approximate
square footage
of facilities
    

Principal products

Steel mills:

     

Blytheville, Arkansas

     2,550,000       Steel shapes, flat-rolled steel

Berkeley County, South Carolina

     2,160,000       Flat-rolled steel, steel shapes

Decatur, Alabama

     2,000,000       Flat-rolled steel

Crawfordsville, Indiana

     1,880,000       Flat-rolled steel

Norfolk, Nebraska

     1,440,000       Steel shapes

Hickman, Arkansas

     1,420,000       Flat-rolled steel

Plymouth, Utah

     1,190,000       Steel shapes

Hertford County, North Carolina

     1,100,000       Steel plate

Jewett, Texas

     1,080,000       Steel shapes

Darlington, South Carolina

     940,000       Steel shapes

Seattle, Washington

     640,000       Steel shapes

Memphis, Tennessee

     520,000       Steel shapes

Auburn, New York

     450,000       Steel shapes

Marion, Ohio

     440,000       Steel shapes

Kankakee, Illinois

     430,000       Steel shapes

Kingman, Arizona

     380,000       Steel shapes

Tuscaloosa, Alabama

     370,000       Steel plate

Jackson, Mississippi

     370,000       Steel shapes

Birmingham, Alabama

     280,000       Steel shapes

Wallingford, Connecticut

     240,000       Steel shapes

Steel products:

     

Norfolk, Nebraska

     1,080,000       Joists, deck, cold finished bar

Brigham City, Utah

     730,000       Joists, cold finished bar

Grapeland, Texas

     680,000       Joists, deck

St. Joe, Indiana

     550,000       Joists, deck

Chemung, New York

     550,000       Joists, deck

Florence, South Carolina

     540,000       Joists, deck

Fort Payne, Alabama

     470,000       Joists, deck

Raw materials:

     

Point Lisas, Trinidad

     2,040,000       Direct reduced iron

Our steel mills segment also includes a distribution center in Pompano Beach, Florida.

In the steel products segment, we have 84 additional operating facilities in 39 states and 28 operating facilities in Canada. Our affiliate, Harris Steel, also operates multiple sales offices in Canada and certain other foreign locations.

In the raw materials segment, DJJ has 68 operating facilities in 15 states along with multiple brokerage offices in the U.S. and certain other foreign locations.

 

14


During 2011, the average utilization rates of all operating facilities in the steel mills, steel products and raw materials segments were approximately 74%, 57% and 70% of production capacity, respectively.

We also own our principal executive office in Charlotte, North Carolina.

 

Item 3. Legal Proceedings

Nucor has been named, along with other major steel producers, as a co-defendant in several related antitrust class-action complaints filed by Standard Iron Works and other steel purchasers in the United States District Court for the Northern District of Illinois. The plaintiffs allege that from January 2005 to the present eight steel manufacturers, including Nucor, engaged in anticompetitive activities with respect to the production and sale of steel. The plaintiffs seek monetary and other relief. Although we believe the plaintiffs’ claims are without merit and will vigorously defend against them, we cannot at this time predict the outcome of this litigation or estimate the range of Nucor’s potential exposure.

In the course of normal compliance evaluation in 2008 at our steel mill in Marion, Ohio, we discovered and self-disclosed to the Ohio Environmental Protection Agency (the “Ohio EPA”) that the facility had failed to properly permit modifications to its power supply. The Ohio EPA has since issued notices of violation for this incident and ancillary issues arising from it. The Ohio EPA has assessed a civil penalty that will not have a material adverse effect on our consolidated financial condition or results of operations. We expect to settle this matter in 2012.

Nucor is involved in various other judicial and administrative proceedings as both plaintiff and defendant, arising in the ordinary course of business. Nucor does not believe that any such proceedings (including matters relating to contracts, torts, taxes, warranties and insurance) will have a material adverse effect on its business, operating results, financial condition or cash flows.

 

Item 4. Mine Safety Disclosures

Not applicable.

 

15


Executive Officers of the Registrant

James R. Darsey (56) – Mr. Darsey has been an Executive Vice President of Nucor since September 2010. He was promoted to Vice President in 1996 and to President of the Vulcraft/Verco Group in 2007. He was General Manager of Nucor Steel, Jewett, Texas from 1999 to 2007; General Manager of Vulcraft, Grapeland, Texas from 1995 to 1999; Engineering Manager of Vulcraft, Grapeland, Texas from 1987 to 1995; and Engineering Manager of Vulcraft, Brigham City, Utah from 1986 to 1987. He began his Nucor career in 1979 as a Design Engineer at Vulcraft, Grapeland, Texas.

Daniel R. DiMicco (61) – Mr. DiMicco has been a director of Nucor since 2000 and was elected Chairman in 2006. Mr. DiMicco has served as Nucor’s Chief Executive Officer since 2000 and served as Vice Chairman from 2001 to 2006. He also served as President from 2000 to 2010. He was an Executive Vice President of Nucor from 1999 to 2000 and Vice President from 1992 to 1999, serving as General Manager of Nucor-Yamato Steel Company. Mr. DiMicco began his career with Nucor in 1982 at Nucor Steel, Plymouth, Utah.

John J. Ferriola (59) – Mr. Ferriola has been President and Chief Operating Officer and a member of the Board of Directors since January 2011. He was the Chief Operating Officer of Steelmaking Operations from 2007 to 2010. Mr. Ferriola previously served as an Executive Vice President of Nucor from 2002 to 2007 and was a Vice President from 1996 to 2001. He was General Manager of Nucor Steel, Crawfordsville, Indiana from 1998 to 2001; General Manager of Nucor Steel, Norfolk, Nebraska from 1995 to 1998; General Manager of Vulcraft, Grapeland, Texas in 1995; and Manager of Maintenance and Engineering at Nucor Steel, Jewett, Texas from 1992 to 1995.

James D. Frias (55) – Mr. Frias has been Chief Financial Officer, Treasurer and Executive Vice President since January 2010. He was a Vice President of Nucor from 2006 to 2009. Mr. Frias previously served as Corporate Controller from 2001 to 2009; Controller of Nucor Steel, Crawfordsville, Indiana from 1994 to 2001; and Controller of Nucor Building Systems, Waterloo, Indiana from 1991 to 1994.

Keith B. Grass (55) – Mr. Grass is an Executive Vice President of Nucor and serves as President and Chief Executive Officer of DJJ. From January 2000 until Nucor acquired DJJ in February 2008, he served as the President and Chief Executive Officer of DJJ. Before he assumed that position with DJJ, Mr. Grass held the following positions with the same company: President and Chief Operating Officer of the Metal Recycling Division during 1999; President of the International Division from 1996 to 1998; Vice President of Trading from 1992 to 1996; District Manager of the Chicago trading office from 1988 to 1992; District Manager of the Detroit office from 1986 to 1988; and District Manager of the Omaha office from 1985 to 1986. Mr. Grass began his career as a brokerage representative in DJJ’s Chicago office in 1978.

Ladd R. Hall (55) – Mr. Hall has been an Executive Vice President of Nucor since September 2007 and was Vice President and General Manager of Nucor Steel, Berkeley County, South Carolina from 2000 to 2007; Vice President and General Manager of Nucor Steel, Darlington, South Carolina from 1998 to 2000; Vice President of Vulcraft, Brigham City, Utah from 1994 to 1998 and General Manager there from 1993 to 1994; General Manager of Vulcraft, Grapeland, Texas in 1993; Sales Manager of Vulcraft, Brigham City, Utah from 1988 to 1993; and Inside Sales at Nucor Steel Plymouth, Utah from 1981 to 1988.

Hamilton Lott, Jr. (62) – Mr. Lott has been an Executive Vice President of Nucor since September 1999 and was a Vice President from 1988 to 1999. He was General Manager of Vulcraft, Florence, South

 

16


Carolina from 1993 to 1999; General Manager of Vulcraft, Grapeland, Texas from 1987 to 1993; Sales Manager of Vulcraft, St. Joe, Indiana from January 1987 to May 1987 and Engineering Manager there from 1982 to 1986. Mr. Lott began his career with Nucor as Design Engineer at Vulcraft, Florence, South Carolina in 1975.

R. Joseph Stratman (55) – Mr. Stratman has been an Executive Vice President of Nucor since September 2007 and was Vice President and General Manager of Nucor-Yamato Steel Company from 1999 to 2007. He was Vice President of Nucor Steel, Norfolk, Nebraska in 1999 and General Manager there from 1998 to 1999; Controller of Nucor-Yamato Steel Company from 1991 to 1998; and Controller of Nucor Building Systems, Waterloo, Indiana from 1989 to 1991.

 

17


PART II

 

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Nucor has increased its base cash dividend every year since the Company began paying dividends in 1973. Nucor paid a total dividend of $1.45 per share in 2011 compared with $1.44 per share in 2010. In December 2011, the board of directors increased the base quarterly cash dividend on Nucor’s common stock to $0.365 per share from $0.3625 per share. In February 2012, the board of directors declared Nucor’s 156th consecutive quarterly cash dividend of $0.365 per share payable on May 11, 2012 to stockholders of record on March 30, 2012.

Additional information regarding the market for Nucor’s common stock, quarterly market price ranges, the number of stockholders and dividend payments is incorporated by reference to Nucor’s 2011 Annual Report, page 68.

 

Item 6. Selected Financial Data

Historical financial information is incorporated by reference to Nucor’s 2011 Annual Report, page 39.

 

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

Information required by this item is incorporated by reference to Nucor’s 2011 Annual Report, page 2 (Forward-looking Statements) and pages 20 through 35.

 

Item 7A. Quantitative and Qualitative Disclosures about Market Risk

In the ordinary course of business, Nucor is exposed to a variety of market risks. We continually monitor these risks and develop appropriate strategies to manage them.

Interest Rate Risk – Nucor manages interest rate risk by using a combination of variable-rate and fixed-rate debt. At December 31, 2011, 24% of Nucor’s long-term debt was in industrial revenue bonds that have variable interest rates that are adjusted weekly or annually. The remaining 76% of Nucor’s debt is at fixed rates. Future changes in interest rates are not expected to significantly impact earnings. Nucor also makes use of interest rate swaps to manage net exposure to interest rate changes. As of December 31, 2011, there were no such contracts outstanding. Nucor’s investment practice is to invest in securities that are highly liquid with short maturities. As a result, we do not expect changes in interest rates to have a significant impact on the value of our investment securities.

Commodity Price Risk – In the ordinary course of business, Nucor is exposed to market risk for price fluctuations of raw materials and energy, principally scrap steel, other ferrous and nonferrous metals, alloys and natural gas. We attempt to negotiate the best prices for our raw materials and energy requirements and to obtain prices for our steel products that match market price movements in response to supply and demand. Nucor utilizes a raw material surcharge as a component of pricing steel to facilitate the passing through of increased costs of scrap steel and other raw materials. In periods of stable demand for our products, our surcharge mechanism has worked effectively to reduce the normal time lag in passing through higher raw material costs so that we can maintain our gross margins. When demand for and cost of raw materials is lower, however, the surcharge impacts our sales prices to a lesser extent.

 

18


Nucor also uses derivative financial instruments to hedge a portion of our exposure to price risk related to natural gas purchases used in the production process and to hedge a portion of our scrap, aluminum and copper purchases and sales. Gains and losses from derivatives designated as hedges are deferred in accumulated other comprehensive income (loss) on the consolidated balance sheets and recognized into earnings in the same period as the underlying physical transaction. At December 31, 2011, accumulated other comprehensive income (loss) included $40.3 million in unrealized net-of-tax losses for the fair value of these derivative instruments. Changes in the fair values of derivatives not designated as hedges are recognized in earnings each period. The following table presents the negative effect on pre-tax earnings of a hypothetical change in the fair value of derivative instruments outstanding at December 31, 2011, due to an assumed 10% and 25% change in the market price of each of the indicated commodities (in thousands):

 

Commodity Derivative

   10% Change      25% Change  

Natural gas

   $ 1,100       $ 2,700   

Aluminum

     3,030         7,576   

Copper

     300         750   

Any resulting changes in fair value would be recorded as adjustments to other comprehensive income (loss), net of tax, or recognized in net earnings, as appropriate. These hypothetical losses would be partially offset by the benefit of lower prices paid or higher prices received for the physical commodities.

Foreign Currency Risk – Nucor is exposed to foreign currency risk through its operations in Canada, Europe, Trinidad and Australia. We periodically use derivative contracts to mitigate the risk of currency fluctuations. Open foreign currency derivative contracts at December 31, 2011 and 2010 were insignificant.

 

Item 8. Financial Statements and Supplementary Data

Information required by this item is incorporated by reference to Nucor’s 2011 Annual Report, pages 40 through 64.

 

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

None.

 

19


Item 9A. Controls and Procedures

Evaluation of Disclosure Controls and Procedures – As of the end of the period covered by this report, the Company carried out an evaluation, under the supervision and with the participation of the Company’s management, including the Company’s Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of the Company’s disclosure controls and procedures. Based upon that evaluation, the Chief Executive Officer and Chief Financial Officer concluded that the Company’s disclosure controls and procedures were effective as of the evaluation date.

Changes in Internal Control Over Financial Reporting – There were no changes in our internal control over financial reporting during the quarter ended December 31, 2011 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Report on Internal Control Over Financial Reporting – Management’s report on internal control over financial reporting required by Section 404 of the Sarbanes-Oxley Act of 2002 and the attestation report of PricewaterhouseCoopers LLP, an independent registered public accounting firm, on the effectiveness of Nucor’s internal control over financial reporting as of December 31, 2011 are incorporated by reference to Nucor’s 2011 Annual Report, pages 40 and 41.

 

Item 9B. Other Information

None.

PART III

 

Item 10. Directors, Executive Officers and Corporate Governance

The information required by this Item about Nucor’s executive officers is contained in Part I, Item 1 of this Form 10-K. The other information required by this Item is contained in the sections of Nucor’s Notice of 2012 Annual Meeting of Stockholders and Proxy Statement (the “Proxy Statement”) captioned Election of Directors, Section 16(a) Beneficial Ownership Reporting Compliance and Corporate Governance and Board of Directors, which sections are incorporated by reference.

Nucor has adopted a Code of Ethics for Senior Financial Professionals (“Code of Ethics”) that applies to the Company’s Chief Executive Officer, Chief Financial Officer, Corporate Controller and other senior financial professionals, as well as Corporate Governance Principles for our Board of Directors and charters for our board committees. These documents are publicly available on our website, www.nucor.com. If we make any substantive amendments to the Code of Ethics or grant any waiver, including any implicit waiver, from a provision of the Code of Ethics, we will disclose the nature of such amendment or waiver on our website.

 

Item 11. Executive Compensation

The information required by this item is included under the headings Compensation Discussion and Analysis, Corporate Governance and Board of Directors, Report of the Compensation and Executive Development Committee in Nucor’s Proxy Statement and is incorporated herein by reference.

 

20


Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

Information required by this item with respect to security ownership of certain beneficial owners and management is incorporated by reference to Nucor’s Proxy Statement under the heading Security Ownership of Management and Certain Beneficial Owners.

The information regarding the number of securities issuable under equity compensation plans and the related weighted average exercise price is incorporated by reference to the Proxy Statement under the heading Equity Compensation Plan Information.

 

Item 13. Certain Relationships and Related Transactions, and Director Independence

Information required by this item is incorporated by reference to Nucor’s Proxy Statement under the heading Corporate Governance and Board of Directors.

 

Item 14. Principal Accountant Fees and Services

Information about the fees in 2011 and 2010 for professional services rendered by our independent registered public accounting firm is incorporated by reference to Nucor’s Proxy Statement under the heading Fees Paid to Independent Registered Public Accounting Firm. The description of our audit committee’s policy on pre-approval of audit and permissible non-audit services of our independent registered public accounting firm is also incorporated by reference from the same section of the Proxy Statement.

PART IV

 

Item 15. Exhibits and Financial Statement Schedules

Financial Statements:

The following consolidated financial statements and the report of independent registered public accounting firm are incorporated by reference to Nucor’s 2011 Annual Report, pages 40 through 64:

 

   

Management’s Report on Internal Control Over Financial Reporting

 

   

Report of Independent Registered Public Accounting Firm

 

   

Consolidated Balance Sheets - December 31, 2011 and 2010

 

   

Consolidated Statements of Earnings - Years ended December 31, 2011, 2010 and 2009

 

   

Consolidated Statements of Stockholders’ Equity - Years ended December 31, 2011, 2010 and 2009

 

   

Consolidated Statements of Cash Flows - Years ended December 31, 2011, 2010 and 2009

 

   

Notes to Consolidated Financial Statements

 

21


Financial Statement Schedules:

The following financial statement schedule is included in this report as indicated:

 

     Page  

Report of Independent Registered Public Accounting Firm on Financial Statement Schedule

         29   

Schedule II – Valuation and Qualifying Accounts – Years ended December 31, 2011, 2010 and 2009

         30   

All other schedules are omitted because they are not required, not applicable, or the information is furnished in the consolidated financial statements or notes.

 

22


Exhibits:

 

3   Restated Certificate of Incorporation (incorporated by reference to Form 8-K filed September 14, 2010)
3(i)   By-Laws as amended and restated September 7, 2011 (incorporated by reference to Form 8-K filed September 9, 2011)
4   Indenture, dated as of January 12, 1999, between Nucor Corporation and The Bank of New York Mellon (formerly known as The Bank of New York), as trustee (incorporated by reference to Form S-4 filed December 13, 2002)
4(i)   Second Supplemental Indenture, dated as of October 1, 2002, between Nucor Corporation and The Bank of New York Mellon (formerly known as The Bank of New York), as trustee (incorporated by reference to Form S-4 filed December 13, 2002)
4(ii)   Third Supplemental Indenture, dated as of December 3, 2007, between Nucor Corporation and The Bank of New York Mellon (formerly known as The Bank of New York), as trustee (incorporated by reference to Form 8-K filed December 4, 2007)
4(iii)   Fourth Supplemental Indenture, dated as of June 2, 2008, between Nucor Corporation and The Bank of New York Mellon (formerly known as The Bank of New York), as trustee (incorporated by reference to Form 8-K filed June 3, 2008)
4(iv)   Fifth Supplemental Indenture, dated as of September 21, 2010, between Nucor Corporation and The Bank of New York Mellon (formerly known as The Bank of New York), as trustee (incorporated by reference to Form 8-K filed September 21, 2010)
4(v)   Form of 4.875% Notes due October 2012 (included in Exhibit 4(i) above) (incorporated by reference to Form S-4 filed December 13, 2002)
4(vi)   Form of 5.00% Notes due December 2012 (included in Exhibit 4(ii) above) (incorporated by reference to Form 8-K filed December 4, 2007)
4(vii)   Form of 5.75% Notes due December 2017 (included in Exhibit 4(ii) above) (incorporated by reference to Form 8-K filed December 4, 2007)
4(viii)   Form of 6.40% Notes due December 2037 (included in Exhibit 4(ii) above) (incorporated by reference to Form 8-K filed December 4, 2007)
4(ix)   Form of 5.00% Notes due June 2013 (included in Exhibit 4(iii) above) (incorporated by reference to Form 8-K filed June 3, 2008)
4(x)   Form of 5.85% Notes due June 2018 (included in Exhibit 4(iii) above) (incorporated by reference to Form 8-K filed June 3, 2008)
4(xi)   Form of 4.125% Notes due September 2022 (included in Exhibit 4(iv) above) (incorporated by reference to Form 8-K filed September 21, 2010)
10   2003 Key Employees Incentive Stock Option Plan (as amended through Amendment 2003-1) (incorporated by reference to Form 10-Q for quarter ended October 4, 2003) (1)
10(i)   Non-Employee Director Equity Plan (incorporated by reference to Form 10-K for year ended December 31, 2000) (1)
10(ii)   2005 Stock Option and Award Plan (incorporated by reference to Form 8-K filed May 17, 2005) (1)
10(iii)   2005 Stock Option and Award Plan, Amendment No. 1 (incorporated by reference to Form 10-Q for quarter ended September 29, 2007) (1)
10(iv)   2010 Stock Option and Award Plan (incorporated by reference to Form 10-Q for quarter ended July 3, 2010) (1)
10(v)   Form of Restricted Stock Unit Award Agreement – time-vested awards (incorporated by reference to Form 10-K for year ended December 31, 2005) (1)
10(vi)   Form of Restricted Stock Unit Award Agreement – retirement-vested awards (incorporated by reference to Form 10-K for year ended December 31, 2005) (1)

 

23


10(vii)   Form of Restricted Stock Unit Award Agreement for Non-Employee Directors (incorporated by reference to Form 10-Q for quarter ended April 1, 2006) (1)
10(viii)   Form of Award Agreement for Stock Option Granted in 2010 (incorporated by reference to Form 10-Q for quarter ended October 2, 2010) (1)
10(ix)   Form of Award Agreement for Annual Stock Option Grants (incorporated by reference to Form 10-Q for quarter ended July 2, 2011) (1)
10(x)   Employment Agreement of Daniel R. DiMicco (incorporated by reference to Form 10-Q for quarter ended June 30, 2001) (1)
10(xi)   Amendment to Employment Agreement of Daniel R. DiMicco (incorporated by reference to Form 10-K for year ended December 31, 2007) (1)
10(xii)   Employment Agreement of James D. Frias (incorporated by reference to Form 10-K for year ended December 31, 2009) (1)
10(xiii)   Employment Agreement of Hamilton Lott, Jr. (incorporated by reference to Form 10-Q for quarter ended June 30, 2001) (1)
10(xiv)   Amendment to Employment Agreement of Hamilton Lott, Jr. (incorporated by reference to Form 10-K for year ended December 31, 2007) (1)
10(xv)   Employment Agreement of John J. Ferriola (incorporated by reference to Form 10-K for year ended December 31, 2001) (1)
10(xvi)   Amendment to Employment Agreement of John J. Ferriola (incorporated by reference to Form 10-K for year ended December 31, 2007) (1)
10(xvii)   Employment Agreement of Ladd R. Hall (incorporated by reference to Form 10-Q for quarter ended September 29, 2007) (1)
10(xviii)   Employment Agreement of R. Joseph Stratman (incorporated by reference to Form 10-Q for quarter ended September 29, 2007) (1)
10(xix)*   Employment Agreement of Keith B. Grass (1)
10(xx)   Employment Agreement of James R. Darsey (incorporated by reference to Form 10-K for year ended December 31, 2010) (1)
10(xxi)   Severance Plan for Senior Officers and General Managers as Amended and Restated Effective February 18, 2009 (incorporated by reference to Form 10-Q for quarter ended April 4, 2009) (1)
10(xxii)   Senior Officers Annual Incentive Plan As Amended and Restated Effective February 18, 2009 (incorporated by reference to Form 10-Q for quarter ended April 4, 2009) (1)
10(xxiii)   Senior Officers Long-Term Incentive Plan As Amended and Restated Effective February 18, 2009 (incorporated by reference to Form 10-Q for quarter ended April 4, 2009) (1)
10(xxiv)   Senior Officers Long-Term Incentive Plan Amendment No. 1 Adopted May 13, 2010 (incorporated by reference to Form 10-Q for quarter ended July 3, 2010) (1)
10(xxv)   Underwriting Agreement dated September 16, 2010 among Nucor Corporation, Banc of America Securities LLC, Citigroup Capital Markets Inc. and J.P. Morgan Securities, Inc. (incorporated by reference to Form 8-K filed September 21, 2010)
12*   Computation of Ratio of Earnings to Fixed Charges
13*   2011 Annual Report (portions incorporated by reference)
21*   Subsidiaries
23*   Consent of Independent Registered Public Accounting Firm
24   Power of attorney (included on signature page)
31*   Certification of Principal Executive Officer Pursuant to Rule 13a-14(a)/15d-14(a), as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
31(i)*   Certification of Principal Financial Officer Pursuant to Rule 13a-14(a)/15d-14(a), as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
32*  

Certification of Principal Executive Officer Pursuant to 18 U.S.C. Section 1350, as Adopted

Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

 

24


32(i)*   Certification of Principal Financial Officer Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
101*   Nucor Corporation Annual Report on Form 10-K for the fiscal year ended December 31, 2011, formatted in XBRL (Extensible Business Reporting Language): (i) the Consolidated Statements of Earnings, (ii) the Consolidated Balance Sheets, (iii) the Consolidated Statements of Cash Flows, (iv) the Consolidated Statements of Stockholders’ Equity, and (v) the Notes to Consolidated Financial Statements.

 

* Filed herewith.
(1) Indicates a management contract or compensatory plan or arrangement.

 

25


SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

NUCOR CORPORATION
  By:  

/s/ Daniel R. DiMicco

    Daniel R. DiMicco
    Chairman and Chief Executive Officer
  Dated: February 28, 2012

POWER OF ATTORNEY

KNOW ALL PERSON BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints James D. Frias and A. Rae Eagle, or any of them, his or her attorney-in-fact, for such person in any and all capacities, to sign any amendments to this report and to file the same, with exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that either of said attorney-in-fact, or substitute or substitutes, may do or cause to be done by virtue hereof.

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

 

/s/ Daniel R. DiMicco

       

/s/ Peter C. Browning

Daniel R. DiMicco

Chairman and Chief Executive Officer

     

Peter C. Browning

Lead Director

/s/ James D. Frias

       

/s/ Clayton C. Daley, Jr.

James D. Frias

Chief Financial Officer, Treasurer and Executive Vice President

(Principal Financial Officer)

     

Clayton C. Daley, Jr.

Director

/s/ Michael D. Keller

       

/s/ John J. Ferriola

Michael D. Keller

Vice President and Corporate Controller

(Principal Accounting Officer)

     

John J. Ferriola

Director, President and Chief Operating Officer

       

/s/ Harvey B. Gantt

       

Harvey B. Gantt

Director

       

/s/ Victoria F. Haynes

       

Victoria F. Haynes

Director

 

26


       

/s/ James D. Hlavacek

       

James D. Hlavacek

Director

       

/s/ Bernard L. Kasriel

       

Bernard L. Kasriel

Director

       

/s/ Christopher J. Kearney

       

Christopher J. Kearney

Director

       

/s/ John H. Walker

       

John H. Walker

Director

Dated: February 28, 2012

 

27


NUCOR CORPORATION

Index to Financial Statement Schedule

 

     Page  

Report of Independent Registered Public Accounting Firm on Financial Statement Schedule

         29   

Schedule II – Valuation and Qualifying Accounts – Years ended December 31, 2011, 2010 and 2009

         30   

 

28


Report of Independent Registered Public Accounting Firm on Financial Statement Schedule

To the Board of Directors and Stockholders of

Nucor Corporation:

Our audits of the consolidated financial statements and of the effectiveness of internal control over financial reporting referred to in our report dated February 28, 2012 appearing in the 2011 Annual Report to Stockholders of Nucor Corporation (which report and consolidated financial statements are incorporated by reference in this Annual Report on Form 10-K) also included an audit of the financial statement schedule listed in Item 15 of this Form 10-K. In our opinion, this financial statement schedule presents fairly, in all material respects, the information set forth therein when read in conjunction with the related consolidated financial statements.

/s/ PricewaterhouseCoopers LLP

Charlotte, North Carolina

February 28, 2012

 

29


NUCOR CORPORATION

Financial Statement Schedule

SCHEDULE II – VALUATION AND QUALIFYING ACCOUNTS (in thousands)

 

Description

   Balance at
beginning of
Year
     Additions
charged to

costs and
expenses
     Deductions     Balance at
end of year
 

Year ended December 31, 2011 LIFO Reserve

   $ 620,414       $ 142,762       $ —        $ 763,176   

Year ended December 31, 2010 LIFO Reserve

   $ 456,448       $ 163,966       $ —        $ 620,414   

Year ended December 31, 2009 LIFO Reserve

   $ 923,362       $ —         ($ 466,914   $ 456,448   

 

30


NUCOR CORPORATION

List of Exhibits to Form 10-K – December 31, 2011

 

Exhibit
No.

 

Description of Exhibit

10(xix)   Employment Agreement of Keith B. Grass
12   Computation of Ratio of Earnings to Fixed Charges
13   2011 Annual Report (portions incorporated by reference)
21   Subsidiaries
23   Consent of Independent Registered Public Accounting Firm
31   Certification of Principal Executive Officer Pursuant to Rule 13a-14(a)/15d-14(a), as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
31(i)   Certification of Principal Financial Officer Pursuant to Rule 13a-14(a)/15d-14(a), as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
32   Certification of Principal Executive Officer Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
32(i)   Certification of Principal Financial Officer Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
101   Nucor Corporation Annual Report on Form 10-K for the fiscal year ended December 31, 2011, formatted in XBRL (Extensible Business Reporting Language): (i) the Consolidated Statements of Earnings, (ii) the Consolidated Balance Sheets, (iii) the Consolidated Statements of Cash Flows, (iv) the Consolidated Statements of Stockholders’ Equity, and (v) the Notes to Consolidated Financial Statements.

 

31