i

PART I

MicroVision, Inc. is a pioneer in laser beam scanning (LBS) technology that we market under our brand name PicoP®. We have developed our proprietary PicoP® scanning technology that can be adopted by our customers to create high-resolution miniature projection and three-dimensional sensing and image capture solutions. PicoP® scanning technology is based on our patented expertise in micro-electrical mechanical systems (MEMS), laser diodes, opto-mechanics, and electronics and how those elements are packaged into a small form factor, low power scanning engine that can display, interact and sense, depending on the needs of the application. For display, the engine can project a high-quality image on any surface (pico projection), a windshield (head-up display or HUD), or a retina (augmented reality or AR). For sensing, we use infrared (IR) lasers to capture three-dimensional data in the form of a point cloud. Interactivity uses the 3D sensing function and the display function to project an image that the user can then interact with as one would a touch screen.

We have licensed our patented PicoP® scanning technology to other companies for incorporation into their scanning engines for projection. We sell our licensees key components needed to produce their laser scanning engines and/or license our technology in exchange for a royalty fee for each scanning engine they sell. Companies to whom we license our PicoP® scanning technology are typically original design manufacturers (ODMs) or original equipment manufacturers (OEMs) who are in the business of making components or products ready for sale to end users. To date, we have primarily focused on the consumer electronics market, however, we believe that our LBS technology creates a platform that can support multiple applications and markets including enterprise, medical, industrial and automotive.

In November 2016, we announced a growth strategy for 2017 and beyond that includes selling LBS engines to ODMs and OEMs in addition to our strategy of licensing LBS technology to licensees to offer their own solutions. We plan to offer three scanning engines to support a wide array of applications: a small form factor display engine for consumer products, an interactive display engine for smart Internet of Things (IoT) products, and a mid-range light detection and ranging (LiDAR) engine for autonomous vehicles, industrial products and robotics.

While we are optimistic about our technology and the potential for future revenues, we have incurred substantial losses since inception and we expect to incur a significant loss during the fiscal year ending December 31, 2017.

MicroVision, Inc. was founded in 1993 as a Washington corporation and reincorporated in 2003 under the laws of the State of Delaware. Our headquarters is located at 6244 185th Avenue NE, Suite 100, Redmond, Washington 98052, and our telephone number is (425) 936-6847.

Our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and all amendments to those reports are available free-of-charge from the investor page of our website, accessible at www.microvision.com, as soon as reasonably practicable after such material is electronically filed with the Securities and Exchange Commission (SEC). Copies of these filings may also be obtained by visiting the Public Reference Room of the SEC at 100 F Street NE, Washington, D.C. 20549, or by calling the SEC directly at 1-800-SEC-0330 (1-800-732-0330). In addition, the SEC maintains a website, www.sec.gov, which contains current, quarterly and annual reports, proxy and information statements and other information regarding issuers that file electronically.

1

Technology

Our patented PicoP® scanning technology combines a MEMS scanning mirror, laser diode light sources, electronics, and optics that are controlled using our proprietary system control algorithms. The bi-directional MEMS scanning mirror is a key component of our technology platform and is one of our core competencies. We also have patents for two mirror MEMS solutions. Our most recent MEMS design is a silicon device with a one millimeter mirror at the center. This mirror is connected to small flexures that allow it to oscillate vertically and horizontally to capture (sensing) or reproduce (display) an image pixel-by-pixel. Scanning engines with our technology can operate in three modes: display only, display and sensing combined, and sensing only. For applications that include a projected display, our PicoP® scanning technology creates a brilliant, full color, high-contrast, uniform image over the entire field-of-view from a small and thin engine with low power consumption. For 3D scanning applications, our engine is also small, high resolution, and low power with the low lag and low persistence features that are important for such applications. We believe that our proprietary technology offers significant advantages over traditional display and 3D sensing systems. Depending on the specific product application, these advantages may include:

• Ability to perform projection and three-dimensional sensing and image capture from a single device;
• Leveraging our custom MEMS and application-specific integrated circuits (ASICS) components across multiple engine types for economies of scale;
• Focus-free operation;
• HD resolution;
• Low power requirements to enable battery operated devices and applications;
• Large screen size up to 200 inches from short distances;
• Small and thin engine size;
• 80,000:1 contrast ratio with true black;
• High-brightness, high-dynamic range, and brightness uniformity;
• Rich, saturated color reproduction;
• Short throw projection with multi-mode operation for table top and wall mode;
• 3D sensing as a touch interface or point cloud;
• Real-time interactive capture of moving targets;
• Dynamic, programmable resolution and frame rate 3D scanning; and
• Expandable 90, 180, 270 and 360 degree coverage for LiDAR applications.

In addition to these advantages, an overarching benefit of our PicoP® scanning technology is its ability to offer a key combination of lumens per-watt per-cubic centimeter: in essence, more lumens at lower power in a smaller form factor. Competing technologies may offer more lumens in total but not in as small and power efficient design as our PicoP® scanning technology. This combination is of particular importance for small, portable devices operated by battery. Equally important for consumer ease-of-use and for mobile projection applications is the focus-free attribute of our PicoP® scanning technology.

Our business strategy is to commercialize our PicoP® scanning technology by enabling ODMs and OEMs to produce end-user products via three go-to-market paths:

• Design and sell LBS engines directly to ODMs and OEMs to incorporate inside their products;
• License our LBS technology and sell key components to ODMs and OEMs to create their own scanning engines; and
• License LBS technology to ODMs and OEMs who developed their own key components.

By providing these options, we permit ODMs and OEMs to integrate and embed our technology across a broad range of display and 3D sensing product applications in the way that best matches their technical capabilities and timelines for bringing their products to market. We create product concept reference designs to enable ODMs and OEMs to develop and rapidly build products that capitalize on the benefits of our PicoP® scanning technology for many of the applications we promote for our technology. We are also developing value-added features intended to help our customers differentiate their potential products.

2

We pursue cooperative marketing and development relationships with suppliers and other companies interested in growing the LBS market to extend the reach of our team and strengthen our position in the market. In 2016, we announced a co-marketing relationship with ST Microelectronics that includes joint sales and marketing activities for LBS solutions.

The key elements of our business strategy include the following:

• Continue to improve the performance of our PicoP® scanning technology platform by advancing the key application attributes such as higher brightness for displays, lower power, smaller size, and greater accuracy and longer distances for 3D sensing;
• Develop value-added features and applications that complement our core technology;
• Partner with ODMs and OEMs to help them develop scanning engines based on our technology or to select an engine to purchase from our offerings, and to help them integrate the engines into their products;
• Support ODMs and supply partners to ensure availability of high quality scanning engines in quantities to support the consumer electronics market;
• Supply scanning engines for ODMs and OEMs who opt to buy rather than build engines as licensees for their products;
• Supply key scanning engine components for products being developed by ODMs and OEMs who license our PicoP® scanning technology and/or license rights to ODMs and OEMs to produce such components;
• Partner with other companies that are interested in growing the LBS market to cooperatively promote our solutions and develop solutions for future products and capabilities where appropriate; and
• Maintain a position of LBS leadership with our intellectual property around our PicoP® scanning technology.

Our PicoP® scanning technology platform strategy is focused on addressing four primary market segments:

• Pico projection/interactive pico projection;
• 3D sensing for automotive and industrial applications;
• Augmented/Virtual Reality (AR/VR); and
• Head up displays (HUD) for automobiles.

We see pico projection, interactive pico projection and short range 3D sensing as the most promising applications for our technology in the near to mid-term. We expect AR/VR and HUD to be mid to long-term opportunities. We have concentrated on pico projection over the past several years and, in 2016, we announced plans for other engine solutions for interactive pico projection and 3D sensing. We also began a development program in late 2016 with a leading technology company for an advanced driver assistance system (ADAS) proof-of-concept demonstrator. We believe AR and VR eyewear displays can also benefit from our technology, and we are actively exploring these opportunities. In 2016, we were engaged by another leading technology company to develop a proof-of-concept demonstrator for an AR application. In the automotive HUD market, we have supported customer evaluations for an LBS HUD.

In pico projection, our goal is to enable a large screen viewing experience produced by a small projector for mobile devices such as smartphones, tablets and other consumer electronics products. The scanning engine can either be embedded in the mobile device directly or in a small standalone companion product that is paired with the mobile device wirelessly or via a protocol such as HDMI. These potential products would allow users to watch digital videos, play games, and display images and other data onto a variety of surfaces, freeing users from the limitations of a small screen. Products that incorporate our PicoP® scanning technology have been announced and brought to market by our licensees and their customers in 2016.

We believe combining interactivity with projection can enable a whole new category of smart IoT products. Our engine, which combines interactivity and projection in a single, integrated module supports time-of-flight (ToF) 3D sensing, can act as a touch interface with the projected image, mimicking the experience users are accustomed to with a smartphone of tablet touchscreen.

For the automotive market, an engine using our PicoP® scanning technology could be combined with other components and systems to form a HUD system to be embedded into a vehicle or integrated into a portable, standalone aftermarket HUD. We have produced prototypes that demonstrate the ability of PicoP® scanning technology to project high-resolution virtual images in the driver's field-of-view, providing the driver with a variety of information related to the vehicle's operation. The small form factor display engine we plan to offer in 2017 is well suited to aftermarket HUD products.

3

We have also begun to investigate opportunities to apply our technology to emerging applications for in-car connectivity and infotainment systems and our mid-range LiDAR engine can be integrated into autonomous vehicles and vehicle ADAS applications for 3D special measurement and navigation assistance.

Another possible application area for our PicoP® scanning technology that we have refocused on in the past year is eyewear displays, also known as AR and VR. We have a long history with this application, and the eyewear ecosystem has progressed to a point where we see future growth opportunities. We are in the exploratory phases with prospective customers in identifying which AR and VR applications offer the most promise for our technology inside their future products.

In addition to display and projection applications, our PicoP® scanning technology has the ability to capture and sense three-dimensional information. We believe there are market opportunities to use our technology to capture images and sense objects. There are multiple methods of performing 3D image capture and sensing using our LBS technology. The first we plan to commercialize is time of flight (ToF), which we are incorporating into our interactive display engine as well as our mid-range LiDAR engine. In addition to the automotive applications discussed above, the mid-range LiDAR engine could enable machine vision for robots, drones, industrial vehicles, and applications.

In 2015 and 2016, our revenue was primarily derived from the sale of our proprietary components and license and royalty fees for PicoP® scanning technology. The key components we offer for inclusion in an LBS engine are our MEMS and ASICs. Our licensees can purchase none, some, or all of the key components we offer depending on their capability and desire to manufacture them and the terms of the licensing agreement.

Our planned 2017 engine product offerings are targeted to a wide variety of ODMs and OEMs for multiple applications, and they consist of:

• A small form factor, high definition display engine for applications where form factor and flexibility of product design are required;
• An interactive display engine that integrates display and 3D sensing to allow the user to interact with projected images; and
• A mid-range LiDAR engine for autonomous, industrial products and robotics.

We began delivering samples of the display engine to customers in December 2016 and expect to be ready for mass production with that engine in the second quarter of 2017. For the interactive display engine, we expect to begin delivering engine samples in the second quarter of 2017 with mass production readiness in the third quarter. We anticipate having samples of the mid-range LiDAR engine in the second half of 2017 and be mass production ready in the first half of 2018.

In addition to product sales and license and royalty fees, we generate revenue from engineering services for custom development and support services for our customers. Historically, our engineering services from collaborative research and development and contract agreements have been a significant portion of our total revenue. In 2015, we transitioned our business to focus more to product sales and royalty revenue, and engineering services has become a smaller part of our business. We expect product sales and royalty revenue to be a significant portion of our total revenue in the future.

We believe our research and development efforts have earned us a leadership position in the field of LBS technology and applications as applied to consumer electronics, automotive and other markets. Our ability to attract customers and grow revenue will depend on our ability to maintain our LBS technology leadership, to continually improve performance, reduce costs, reduce the size of component parts and scanning engines, and to increase the number of applications and products enabled by our PicoP® scanning technology.

Our research and development team is located in Redmond, Washington and as of December 31, 2016, was comprised of 49 engineering and technical staff in optics, computer vision, software engineering, electrical engineering, and MEMS design.

4

Sales and Marketing

Our sales and marketing approach is account based, business-to-business targeting of ODMs and OEMs. We license our PicoP® scanning technology and sell components used in the production of scanning engines to our licensees and sell scanning engines to our customers. Our customers are typically companies that want to buy or build LBS engines for incorporation into their products. We also engage end product manufacturers and retailers in our target markets to educate them about product opportunities based on our PicoP® scanning technology.

We currently have sales and business development representatives based in the United States and several parts of Asia, focused on business development in the Americas, Europe and Asia. Our sales and business development representatives are supported by a technical sales engineering team that assists customers during the "design win" and "design in" cycles. The technical sales engineering team operates from Redmond, Washington, Taiwan and Japan. Our marketing team is located in Redmond, Washington. We engage potential customers directly, participate in trade shows, use social media, and maintain a website and cooperate on co-marketing activities with key partners.

We currently use contract manufacturers to produce the products we sell. Our products include scanning engines as well as components that are integral to a scanning engine incorporating our PicoP® scanning technology and include MEMS and ASICs that incorporate our designs and are produced to order by semiconductor foundries.

In addition to our business of licensing technology and selling components, beginning in 2017, we expect our product offerings to include scanning engine products manufactured by a contract manufacturer based on our proprietary design.

Our manufacturing is not currently subject to seasonal variations as our shipments have been relatively small and are in the early stages of product introduction. In the future, depending on our customers' product mix, we may be affected by seasonal fluctuations which could affect working capital demands.

We provide forecasts that allow our contract manufacturers to stock component parts and other materials and plan capacity. Our contract manufacturers procure raw materials in volumes consistent with our forecasts, manufacture and/or assemble the products and perform tests according to our specifications. Products are either shipped to our customers or shipped to our Redmond, Washington headquarters to be inventoried as finished goods. We procure some specific components and either sell them or consign them to our contract manufacturers. We hold some inventories of these components. Our contract manufacturers procure additional raw materials we do not own when the finished goods are completed by our contract manufacturer. Title to the products transfers from our contract manufacturers to us and then to our customers upon shipment from the manufacturer. If raw materials are unused, or the products are not sold within specified periods of time, we may incur carrying charges or obsolete material charges for component parts that our contract manufacturers purchased to build products to meet our forecasts or customer orders.

Many of the raw materials used in our components are standard to the consumer electronics industry. Our MEMS, MEMS die, and ASICs are currently manufactured to our specifications by separate single-source suppliers.

We work with third party independent experts in the field of laser safety to assist in meeting safety specifications. In addition, we monitor developments in the area of permissible laser exposure limits as established by International Electrotechnical Commission (IEC) and others. Independent experts have concluded that laser exposure to the eye resulting from use of LBS devices under normal operating conditions would be below the calculated maximum permissible exposure level set by the IEC.

The information display and 3D sensing industries are highly competitive. Potential products incorporating our PicoP® scanning technology, including any LBS engines we develop, will compete with manufacturers of established technologies, such as flat panel display devices, as well as companies developing new display and 3D sensing technologies.

5

Our competitors include companies such as Texas Instruments, Intel, Syndiant, Velodyne, Quanargy, Innoluce, Opus, Mirrorcle, Maradin, Himax, Pioneer, Sony (LCOS) and others, some of which have much greater financial, technical and other resources than us. Many of our competitors are currently developing alternative miniature display and 3D sensing technologies. Our competitors may succeed in developing innovative technologies and products that could render our technology or our proposed products commercially infeasible or technologically obsolete.

Pico projectors are a class of miniaturized projectors that are generally handheld, battery operated, mobile projectors. Most of the competing projectors currently on the market are either liquid crystal on silicon (LCOS) panel solutions or Texas Instruments' DLP™ display technology primarily using light-emitting diode (LED) light sources. Each of these projection solutions can create images of varying resolution, brightness, image quality, battery life, and ease-of-use.

The information display and 3D sensing industries have been characterized by rapid and significant technological advances. Our PicoP® scanning technology platform and potential products may not remain competitive with such advances, and we may not have sufficient funds to invest in new technologies, products or processes. Although we believe our technology platform and proposed products could deliver images of a substantially higher quality and resolution from a smaller form factor device than those of commercially available LCOS and DLP based display products, manufacturers of competing technologies may develop further improvements to screen display technology that could reduce or eliminate the anticipated advantages of our proposed products.

3D sensing is a new market for us and we believe we are developing products that will have cost and performance benefits over what competitors may offer. However, manufacturers of competing technologies may develop further improvements to size of their modules, performance for mid-range LiDAR and lower costs that could reduce or eliminate the anticipated advantages of our proposed products.

We create intellectual property from three sources: internal research and development activities, technology acquisitions, and performance on development contracts. The inventions covered by our patent applications generally relate to systems controls in our PicoP® scanning technology, component miniaturization, power reduction, feature enhancements, specific implementation of various system components, and design elements to facilitate mass production. Protecting these key-enabling technologies and components is a fundamental aspect of our strategy to penetrate diverse markets with unique products. As such, we intend to continue to develop our portfolio of proprietary and patented LBS technologies at the system, component, and process levels.

We believe our extensive patent portfolio is the largest, broadest, and earliest filed LBS technology portfolio and includes applications such as automotive HUD, augmented reality, range finding, portable media devices, image capture, and projection applications. We have over 500 issued patents, pending patents and licensed patents worldwide.

Since our inception in 1993, we have acquired under license agreements exclusive rights to various LBS technologies, including, among others, rights related to the ability to superimpose images on the user's field-of-view with a retinal display, and rights related to the design and fabrication of micro-miniature devices using semiconductor fabrication techniques. In some cases, the licensors have retained limited, non-commercial rights with respect to the technology, including the right to use the technology for non-commercial research and for instructional purposes.

Our ability to compete effectively in the information display and 3D sensing markets may depend, in part, on our ability and the ability of our licensors to maintain the proprietary nature of these technologies.

We also rely on unpatented proprietary technology. To protect our rights in these areas, we require all employees, and where appropriate, contractors, consultants, advisors and collaborators, to enter into confidentiality and non-compete agreements. There can be no assurance, however, that these agreements will provide meaningful protection for our trade secrets, know-how or other proprietary information in the event of any unauthorized use, misappropriation or disclosure of such trade secrets, know-how or other proprietary information.

We have registered the name "PicoP®" and "MicroVision®" with the United States Patent and Trademark Office.

6

Employees

As of February 27, 2017, we had 81 full-time employees. None of our employees are represented by a labor union.

We have had substantial losses since our inception. We cannot assure you that we will ever become or remain profitable.

• As of December 31, 2016, we had an accumulated deficit of $499.8 million.
• We incurred consolidated net losses of $450.7 million from inception through 2013, $18.1 million in 2014, $14.5 million in 2015, and $16.5 million in 2016.

The likelihood of our success must be considered in light of the expenses, difficulties and delays frequently encountered by companies formed to develop and commercialize new technologies. In particular, our operations to date have focused primarily on research and development of our PicoP® scanning technology platform and development of demonstration units. We are unable to accurately estimate future revenues and operating expenses based upon historical performance.

We cannot be certain that we will succeed in obtaining additional development revenue or commercializing our technology or products. In light of these factors, we expect to continue to incur significant losses and negative cash flow at least through 2017 and likely thereafter. We cannot be certain that we will achieve positive cash flow at any time in the future.

Based on our current operating plan, and without additional proceeds from the sale of shares under our existing Common Stock Purchase Agreement or At-the-Market (ATM) facility discussed in Note 8 to our financial statements, we anticipate that we have sufficient cash and cash equivalents to fund our operations into the third quarter of 2017. We will require additional capital to fund our operating plan past that time. We plan to obtain additional capital through the issuance of equity or debt securities, product sales and/or licensing activities.

Our ability to raise proceeds from the sale of shares under our Common Stock Purchase Agreement is subject to limitations and conditions, including a $1.00 minimum stock price. In addition, pursuant to the Common Stock Purchase Agreement, we agreed that we will not enter into any "variable rate" transactions with any third party from the date of the Purchase Agreement until the expiration of the twenty-four month period following the date of the Purchase Agreement, subject to certain exceptions, which could limit our ability to raise capital through certain sales of equity. In connection with our December 2016 underwritten public offering, we also agreed in the underwriting agreement not to issue shares pursuant to the Common Stock Purchase Agreement, or any other arrangement with Lincoln Park Capital Fund, LLC (Lincoln Park), for a period of six months from the date thereof without the consent of the underwriter.

7

We are introducing new technology into an emerging market which creates significant uncertainty about our ability to accurately project revenue, costs and cash flows. Our capital requirements will depend on many factors, including, but not limited to, the rate at which ODMs and OEMs introduce products incorporating our PicoP® scanning technology and the market acceptance and competitive position of such products. If revenues are less than we anticipate, if the mix of revenues and the associated margins varies from anticipated amounts or if expenses exceed the amounts budgeted, we may require additional capital earlier than expected to fund our operations. In addition, our operating plan provides for the development of strategic relationships with suppliers of components, products and systems, and equipment manufacturers that may require additional investments by us.

Additional capital may not be available to us or, if available, may not be available on terms acceptable to us or on a timely basis. Raising additional capital may involve issuing securities with rights and preferences that are senior to our common stock and may dilute the value of our current shareholders' shares. If adequate capital resources are not available on a timely basis, we may consider limiting our operations substantially. This limitation of operations could include reducing investments in our production capabilities or research and development projects, staff, operating costs, and capital expenditures. Reducing operations may jeopardize our ability to achieve our business goals or satisfy our customer requirements.

We rely on single or limited-source suppliers to manufacture our products, including our MEMS die in wafer form. The lead time to establish a relationship with a new or alternative contract manufacturer(s) or foundry is a time-consuming process, as our unique technology may require significant manufacturing process adaptation to achieve full manufacturing capacity. Accordingly, we may be unable to establish a relationship with new or alternative contract manufacturers in the short-term, or at all, at prices or on other terms that are acceptable to us.

Changes in our supply chain may result in increased cost and delay and may subject us to risks and uncertainties regarding, but not limited to, product warranty, product liability and quality control standards. The loss of any single or limited-source supplier, the failure of any of these suppliers to perform as expected or the disruption in the supply chain of components from these suppliers could cause significant delays in product deliveries, which may result in lost revenues and damaged customer relationships. To the extent that we are not able to establish a relationship with a new or alternative contract manufacturer(s) or foundry in a timely manner, we may be unable to meet contract or production milestones, which could have a material adverse effect on our financial condition, results of operations and cash flows.

Our success will depend, in part, on our ability to provide our components and future products in commercial quantities at competitive prices and on schedule. Accordingly, we will be required to obtain access, through business partners or contract manufacturers, to manufacturing capacity and processes for the commercial production of our expected future products.

We are dependent on third parties in order to develop, manufacture, sell and market products incorporating our PicoP® scanning technology, scanning engines, and the scanning engine components.

Our business strategy for commercializing our technology in products incorporating PicoP® scanning technology includes entering into development, manufacturing, sales and marketing arrangements with ODMs, OEMs and other third parties. These arrangements reduce our level of control over production and distribution and may subject us to risks and uncertainties regarding, but not limited to, product warranty, product liability and quality control standards.

8

We cannot be certain that we will be able to negotiate arrangements on acceptable terms, if at all, or that these arrangements will be successful in yielding commercially viable products. If we cannot establish these arrangements, we would require additional capital to undertake such activities on our own and would require extensive manufacturing, sales and marketing expertise that we do not currently possess and that may be difficult to obtain.

In addition, we could encounter significant delays in introducing our PicoP® scanning technology or find that the development, manufacture or sale of products incorporating our technology would not be feasible. To the extent that we enter into development, manufacturing, sales and marketing or other arrangements, our revenues will depend upon the performance of third parties. We cannot be certain that any such arrangements will be successful.

We cannot be certain that our technology platform or products incorporating our PicoP® scanning technology will achieve market acceptance. If our technology platform or products incorporating our technology do not achieve market acceptance, our revenues may not grow.

Our success will depend in part on customer acceptance of our PicoP® scanning technology. Our technology may not be accepted by manufacturers who use display and 3D sensing technologies in their products, by systems integrators, ODMs, and OEMs who incorporate the scanning engine components into their products or by end users of these products. To be accepted, our PicoP® scanning technology must meet the expectations of our current and potential customers in the consumer electronics, automotive, and other markets. If our technology platform or products incorporating our PicoP® scanning technology do not achieve market acceptance, we may not be able to continue to develop our technology.

Future products incorporating our PicoP® scanning technology and scanning engines are dependent on advances in technology by other companies.

Our PicoP® scanning technology will continue to rely on technologies, such as laser diode light sources and other components that are developed and produced by other companies. The commercial success of certain future products incorporating our PicoP® scanning technology will depend, in part, on advances in these and other technologies by other companies. We may, from time to time, contract with and support companies developing key technologies in order to accelerate the development of them for our or our customers' specific uses. There are no guarantees that such activities will result in useful technologies or products that will be profitable.

In 2016, one commercial customer accounted for $13.5 million in revenue, representing 91% of our total revenue. In 2015, the same commercial customer accounted for $9.0 million in revenue, representing 98% of our total revenue. In 2014, the same single commercial customer accounted for $2.0 million in revenue, representing 58% of our total revenue. A second commercial customer in 2014 accounted for $577,000 in revenue, representing 17% of our total revenue. Our customers take time to obtain, and the loss of a significant customer could negatively affect our revenue. Our quarterly operating results may vary significantly based upon:

• Market acceptance of products incorporating our PicoP® scanning technology;
• Changes in evaluations and recommendations by any securities analysts following our stock or our industry generally;
• Announcements by other companies in our industry;
• Changes in business or regulatory conditions;
• Announcements or implementation by our competitors of technological innovations or new products;
• The status of particular development programs and the timing of performance under specific development agreements;
• Economic and stock market conditions; or
• Other factors unrelated to our company or industry.

In one or more future quarters, our results of operations may fall below the expectations of securities analysts and investors and the trading price of our common stock may decline as a consequence. In addition, following periods of volatility in the market price of a company's securities, shareholders often have instituted securities class action litigation against that company.

9

If we become involved in a class action suit, it could divert the attention of management and, if adversely determined, could require us to pay substantial damages.

Our backlog of open orders totaled $942,000 as of December 31, 2016. We or our customers may be unable to meet the performance requirements and obligations under open orders or agreements, including performance specifications or delivery dates, required by such purchase orders or agreements.  Furthermore, our customers may be unable or unwilling to perform their obligations thereunder on a timely basis, or at all if, among other reasons, our products and technologies do not achieve market acceptance, our customers' products and technologies do not achieve market acceptance or our customers otherwise fail to achieve their operating goals.  To the extent we are unable to perform under such purchase orders or agreements or to the extent customers are unable or unwilling to perform, our operating results and cash flows could be adversely affected.

Our common stock is listed on The NASDAQ Global Market. To maintain our listing on this market, we must meet NASDAQ's listing maintenance standards. If we are unable to continue to meet NASDAQ's listing maintenance standards for any reason, our common stock could be delisted from The NASDAQ Global Market. If our common stock were delisted, we likely would seek to list our common stock on The NASDAQ Capital Market, the American Stock Exchange or on a regional stock exchange. Listing on such other market or exchange could reduce the liquidity of our common stock. If our common stock were not listed on The NASDAQ Capital Market or an exchange, trading of our common stock would be conducted in the Over-the- Counter (OTC) market on an electronic bulletin board established for unlisted securities or directly through market makers in our common stock. If our common stock were to trade in the OTC market, an investor would find it more difficult to dispose of, or to obtain accurate quotations for the price of, the common stock.

A delisting from The NASDAQ Global Market and failure to obtain listing on another market or exchange would subject our common stock to so-called penny stock rules that impose additional sales practice and market-making requirements on broker-dealers who sell or make a market in such securities. Consequently, removal from The NASDAQ Global Market and failure to obtain listing on another market or exchange could affect the ability or willingness of broker-dealers to sell or make a market in our common stock and the ability of purchasers of our common stock to sell their securities in the secondary market.

On February 27, 2017, the closing price of our common stock was $1.71 per share.

Our products and potential products incorporating our PicoP® scanning technology will compete with established manufacturers of existing products and companies developing new technologies. Many of our competitors have substantially greater financial, technical and other resources than we have. Because of their greater resources, our competitors may develop products or technologies that may be superior to our own. The introduction of superior competing products or technologies could result in reduced revenues, lower margins or loss of market share, any of which could reduce the value of our business.

The information display and 3D sensing industries have been characterized by rapidly changing technology, accelerated product obsolescence and continuously evolving industry standards. Our success will depend upon our ability to further develop our PicoP® scanning technology platform and to cost effectively introduce new products and features in a timely manner to meet evolving customer requirements and compete with competitors' product advances. We may not succeed in these efforts due to:

• Delays in product development;
• Lack of market acceptance for our technology or products incorporating our PicoP® scanning technology; or
• Lack of funds to invest in product research, development and marketing.

10

The occurrence of any of the above factors could result in decreased revenues, market share and value of our business.

We are aware of several patents held by third parties that relate to certain aspects of light scanning displays and 3D sensing products. These patents could be used as a basis to challenge the validity, limit the scope or limit our ability to obtain additional or broader patent rights of our patents or patents we have licensed. A successful challenge to the validity of our patents or patents we have licensed could limit our ability to commercialize our technology or products incorporating our PicoP® scanning technology and, consequently, materially reduce our revenues. Moreover, we cannot be certain that patent holders or other third parties will not claim infringement by us with respect to current and future technology. Because U.S. patent applications are held and examined in secrecy, it is also possible that presently pending U.S. applications will eventually be issued with claims that will be infringed by our products or our technology.

The defense and prosecution of a patent suit would be costly and time-consuming, even if the outcome were ultimately favorable to us. An adverse outcome in the defense of a patent suit could subject us to significant costs, require others and us to cease selling products incorporating our technology, require us to cease licensing our technology or require disputed rights to be licensed from third parties. Such licenses, if available, would increase our operating expenses. Moreover, if claims of infringement are asserted against our future co-development partners or customers, those partners or customers may seek indemnification from us for any damages or expenses they incur.

Our ability to successfully offer products incorporating PicoP® scanning technology and implement our business plan in a rapidly evolving market requires an effective planning and management process. The growth in business and relationships with customers and other third parties has placed, and will continue to place, a significant strain on our management systems and resources. We will need to continue to improve our financial and managerial controls, reporting systems and procedures, and will need to continue to train and manage our work force.

We incur significant costs related to procuring components and increasing our production capabilities to manufacture our products. We may experience delays, cost overruns or other unexpected costs associated with an increase in production. If we are unsuccessful in our efforts to reduce and control our manufacturing, supply chain and operating costs and keep costs aligned with the levels of revenues we generate, our business and financial condition could suffer.

Our technology and products incorporating our PicoP® scanning technology may be subject to future environmental, health and safety regulations that could increase our development and production costs.

Our technology and products incorporating our PicoP® scanning technology could become subject to future environmental, health and safety regulations or amendments that could negatively impact our ability to commercialize our technology and products incorporating our PicoP® scanning technology. Compliance with any such new regulations would likely increase the cost to develop and produce products incorporating our PicoP® scanning technology, and violations may result in fines, penalties or suspension of production. If we become subject to any environmental, health, or safety laws or regulations that require us to cease or significantly change our operations to comply, our business, financial condition and operating results could be adversely affected.

11

Our operating results may be adversely impacted by worldwide political and economic uncertainties and specific conditions in the markets we address.

In the recent past, general worldwide economic conditions have experienced a downturn due to slower economic activity, concerns about inflation, increased energy costs, decreased consumer confidence, reduced corporate profits and capital spending, and adverse business conditions. Any continuation or worsening of the current global economic and financial conditions could materially adversely affect: (i) our ability to raise, or the cost of, needed capital, (ii) demand for our current and future products, and (iii) our ability to commercialize products. We cannot predict the timing, strength, or duration of any economic slowdown or subsequent economic recovery, worldwide, regionally or in the display industry.

We currently use foreign contract manufacturers and plan to continue to use foreign contract manufacturers to manufacture current and future products, where appropriate. These international operations are subject to inherent risks, which may adversely affect us, including, but not limited to:

• Political and economic instability;
• High levels of inflation, historically the case in a number of countries in Asia;
• Burdens and costs of compliance with a variety of foreign laws, regulations and sanctions;
• Foreign taxes and duties;
• Changes in tariff rates or other trade, tax or monetary policies; and
• Changes or volatility in currency exchange rates and interest rates.

A major catastrophe, such as an earthquake, monsoon, flood or other natural disaster, labor strike, or work stoppage at our contract manufacturers' facilities, our suppliers, or our customers, could result in a prolonged interruption of our business. A disruption resulting from any one of these events could cause significant delays in product shipments and the loss of sales and customers, which could have a material adverse effect on our financial condition, results of operations, and cash flows.

Intellectual property protection for our products, processes and technology is important and uncertain. If we do not obtain effective intellectual property protection for our products, processes and technology, we may be subject to increased competition. Our commercial success will depend, in part, on our ability and the ability of our licensors, to maintain the proprietary nature of our PicoP® scanning technology and other key technologies by securing valid and enforceable patents and effectively maintaining unpatented technology as trade secrets.

We protect our proprietary PicoP® scanning technology by seeking to obtain United States and foreign patents in our name, or licenses to third party patents, related to proprietary technology, inventions, and improvements that may be important to the development of our business. However, our patent position and the patent position of our licensors involve complex legal and factual questions. The standards that the United States Patent and Trademark Office and its foreign counterparts use to grant patents are not always applied predictably or uniformly and can change.

Additionally, the scope of patents are subject to interpretation by courts and their validity can be subject to challenges and defenses, including challenges and defenses based on the existence of prior art. Consequently, we cannot be certain as to the extent to which we will be able to obtain patents for our new products and technology or the extent to which the patents that we already own or license from others, protect our products and technology. Reduction in scope of protection or invalidation of our licensed or owned patents, or our inability to obtain new patents, may enable other companies to develop products that compete directly with ours on the basis of the same or similar technology.

12

We also rely on the law of trade secrets to protect unpatented know-how and technology to maintain our competitive position. We try to protect this know-how and technology by limiting access to the trade secrets to those of our employees, contractors and partners, with a need-to-know such information and by entering into confidentiality agreements with parties that have access to it, such as our employees, consultants and business partners. Any of these parties could breach the agreements and disclose our trade secrets or confidential information, or our competitors might learn of the information in some other way. If any trade secret not protected by a patent were to be disclosed to or independently developed by a competitor, our competitive position could be negatively affected.

We could be subject to product liability claims if any of the product applications are alleged to be defective or cause harmful effects. For example, because some of the scanning engines incorporating our PicoP® scanning technology could scan a low power beam of colored light into the user's eye, the testing, manufacture, marketing and sale of these products involve an inherent risk that product liability claims will be asserted against us.

Additionally, any misuse of our technology or products incorporating our PicoP® scanning technology by end users or third parties that obtain access to our technology, could result in negative publicity and could harm our brand and reputation. Product liability claims or other claims related to our products or our technology, regardless of their outcome, could require us to spend significant time and money in litigation, divert management time and attention, require us to pay significant damages, harm our reputation or hinder acceptance of our products. Any successful product liability claim may prevent us from obtaining adequate product liability insurance in the future on commercially desirable or reasonable terms. An inability to obtain sufficient insurance coverage at an acceptable cost or otherwise to protect against potential product liability claims could prevent or inhibit the commercialization of our products and our PicoP® scanning technology.

Our contracts and collaborative research and development agreements have long sales cycles that involve numerous steps including determining the product application, exploring the technical feasibility of a proposed product, evaluating the costs of manufacturing a product or qualifying a new or alternative contract manufacturer for production. Our long sales cycle, which can last several years, makes it difficult to predict the quarter in which revenue recognition will occur. Delays in entering into contracts and collaborative research and development agreements could cause significant variability in our revenues and operating results for any particular period.

Our contracts and collaborative research and development agreements, including without limitation, those discussed in this document, are exploratory in nature and are intended to develop new types of products for new applications. Our efforts may prove unsuccessful and these relationships may not result in the development of any product or any products that will be profitable.

We rely on information technology systems to process, transmit, store, and protect electronic data between our employees, our customers and our suppliers. Our systems are vulnerable to damage or interruptions due to events beyond our control, including, but are not limited to, natural disasters, power loss, telecommunications failures, computer viruses, hacking, or other cyber security issues. Our system redundancy may be inadequate and our disaster recovery planning may be ineffective or insufficient to account for all eventualities. Additionally, we maintain insurance coverage to address certain aspects of cyber risks. Such insurance coverage may be insufficient to cover all losses or all claims that may arise, should such an event occur.

13

Loss of any of our key personnel could have a negative effect on the operation of our business.

Our success depends on our executive officers and other key personnel and on the ability to attract and retain qualified new personnel. Achievement of our business objectives will require substantial additional expertise in the areas of sales and marketing, research and product development and manufacturing. Competition for qualified personnel in these fields is intense, and the inability to attract and retain additional highly skilled personnel, or the loss of key personnel, could hinder our ability to compete effectively in the information display and 3D sensing markets and adversely affect our business strategy execution and results of operations.

None.

We currently lease approximately 23,900 square feet of combined use office, laboratory and manufacturing space at our corporate headquarters in Redmond, Washington. The 65 month lease expires in January 2019.

On March 31, 2014, Asia Optical Co., Inc., a supplier pursuant to an agreement entered into in 2008, filed a complaint for arbitration with the American Arbitration Association claiming that we ordered products from them and failed to take delivery of and pay for such products. The relief sought in the complaint is $3.6 million plus attorneys' fees, interest and arbitration costs. We contest the claim and are defending against it. An adverse outcome of these proceedings could materially and adversely affect our financial condition. At this stage, we cannot predict the likelihood of an unfavorable outcome or the range of potential loss.

We are also subject to various claims and pending or threatened lawsuits in the normal course of business. We are not currently party to any other legal proceedings that we believe are reasonably possible to have a material adverse effect on our financial position, results of operations or cash flows.

Not applicable.

Executive officers are appointed by our Board of Directors and hold office until their successors are elected and duly qualified. The following persons serve as executive officers of MicroVision, Inc.:

Alexander Y. Tokman, age 55, has served as President, Chief Executive Officer and Director of MicroVision since January 2006. Mr. Tokman served as MicroVision's President and Chief Operating Officer from July 2005 to January 2006. Mr. Tokman joined MicroVision after a ten-year tenure at GE Healthcare, a subsidiary of General Electric, where he led several global businesses, most recently as General Manager of its Global Molecular Imaging and Radiopharmacy multi-technology business unit from 2003 to 2005. Prior to that, between 1995 and 2003, Mr. Tokman served in various cross-functional and cross-business leadership roles at GE where he led the definition and commercialization of several medical modalities product segments including PET/CT, which added over $500 million of revenue growth to the company within the first three years of its commercial introduction. Mr. Tokman is a certified Six Sigma and Design for Six Sigma (DFSS) Black Belt and Master Black Belt and as one of GE's Six Sigma pioneers, he drove the quality culture change across GE Healthcare in the late 1990s. From November 1989 to March 1995, Mr. Tokman served as new technologies programs lead and the head of the I&RD office at Tracor Applied Sciences, a subsidiary of then Tracor, Inc. Mr. Tokman holds a B.S. and an M.S. in electrical engineering from the University of Massachusetts, Dartmouth.

Stephen P. Holt, age 54, joined MicroVision in April 2013 as Chief Financial Officer. Prior to MicroVision, from May 2007 to May 2012, he served as Chief Financial Officer of PixelOptics, where he played a lead role in bringing the company's first electronic focusing eyewear product to market. At this venture capital-backed start-up, Mr. Holt raised capital and negotiated strategic partner agreements to license technology in addition to implementing policies and procedures to create an infrastructure capable of supporting rapid growth while maintaining a strong internal control environment. From March 2006 to April 2007, he was the Chief Financial Officer of Interstate Distributors, a trucking and transportation services company.

14

From December 2003 to March 2006, he was the Chief Financial Officer of a group of companies consisting of Activelight, Boxlight, Cinelight and Projector Wholesale Supply. These companies were value-added resellers and distributors of audio-visual and projection equipment. Mr. Holt, a Certified Management Accountant, holds a B.S. from California State University, Chico and an M.B.A. from Santa Clara University.

David J. Westgor, age 63, was appointed Vice President, General Counsel and Secretary in November 2013, after serving as General Counsel since December 2012 and Deputy General Counsel since June 2007. In his current role, Mr. Westgor oversees the legal department, advises the Board of Directors and executive team on corporate governance matters, and provides support for the company's business activities. Before joining MicroVision, Mr. Westgor was Senior Counsel at Medtronic Physio-Control, where he had primary responsibility for the legal affairs of its medical and informatics business units. Mr. Westgor graduated from Loyola Law School and practiced in the Los Angeles office of Pillsbury Winthrop. He moved to the Seattle area to become in-house counsel at Advanced Radio Telecom, a broadband telecommunications company. Mr. Westgor holds a B.A. from St. Olaf College and an M.F.A. degree from the Art Institute of Chicago.

Dale E. Zimmerman, age 57, has served as Vice President of Research and Development since June 2012 and as Director of Systems Engineering from June 2011 to May 2012. Prior to MicroVision, from February 2006 to December 2008, he served as Vice President of Product Strategy of Silicon Image, a company specializing in high speed serial interface solutions for HDTV, PC and storage products. From 1996 to 2006, he served as General Manager of DLP TV for Texas Instruments, where he played an important role in launching the first conference room projectors, home theater projectors, and HDTVs. His teams have received many awards, including three Emmys and CES Innovation Best of Show. He holds both a B.S. and an M.S. degree in electrical and electronics engineering from Massachusetts Institute of Technology (MIT) and a second M.S. in electrical engineering from Stanford University.

Our common stock began trading publicly on August 27, 1996. Our common stock trades on The NASDAQ Global Market under the ticker symbol "MVIS." We have never declared or paid cash dividends on our common stock. We currently anticipate that we will retain all future earnings to fund the operations of our business and do not anticipate paying dividends on the common stock in the foreseeable future.

As of February 27, 2017, there were approximately 112 holders of record of 68,122,000 shares of common stock outstanding. As many of our shares of common stock are held by brokerages and institutions on behalf of shareholders, we are unable to estimate the total number of beneficial holders of our common stock represented by these record holders.

15

ITEM 6. SELECTED FINANCIAL DATA

A summary of selected financial data as of and for the five years ended December 31, 2016 is set forth below. It should be read in conjunction with our consolidated financial statements and related notes appearing elsewhere in this Annual Report on Form 10-K.

Our business strategy is to commercialize our PicoP® scanning technology by enabling ODMs and OEMs to produce end-user products via three go-to-market paths:

1. Design and sell LBS engines directly to ODMs and OEMs to incorporate inside their products;
2. License our LBS technology and sell key components to ODMs and OEMs to create their own scanning engines; and
3. License LBS technology to ODMs and OEMs who developed their own key components.

In 2014, our revenue was primarily derived from engineering services from collaborative research and development and contract agreements. In 2015 and 2016, our revenue was primarily generated from product sales and royalty revenue, and engineering services has become a smaller part of our business. We expect product sales to be a significant portion of our total revenue in the future.

In 2016, 87% of our revenue was generated from product sales, less than 1% was generated from performance on contracts for prototype units, 7% was generated from a prorated portion of the $8.0 million upfront payment, and 5% was generated from ongoing per unit royalties. Sony Corporation (Sony) accounted for 91% of our total revenue in 2016.

In 2015, 70% of our revenue was generated from product sales, 17% was generated from performance on support services contracts, 10% was generated from a prorated portion of the $8.0 million upfront payment, and 3% was generated from ongoing per unit royalties. Sony accounted for 98% of our total revenue in 2015.

In 2014, 49% of our revenue was generated from performance on collaborative research and development agreements, 40% was generated from performance on contracts to deliver customized prototype units, 10% was generated from product sales, and 1% was generated from ongoing per unit royalties. Sony accounted for 58% of our total revenue and a worldwide logistics company accounted for 17% of our total revenue in 2014.

We have incurred substantial losses since inception and expect to incur a significant loss during the fiscal year ending December 31, 2017. We have funded operations to date primarily through the sale of common stock, convertible preferred stock, warrants, the issuance of convertible debt and, to a lesser extent, from development contract revenues, product sales and licensing activities. There can be no assurance that additional capital will be available or that, if available, it will be available on terms acceptable to us on a timely basis. We cannot be certain that we will succeed in commercializing our technology or products. These factors raise substantial doubt regarding our ability to continue as a going concern.

16

These financial statements were prepared assuming we will continue as a going concern and do not include any adjustments that might be necessary should we be unable to continue as a going concern.

Our discussion and analysis of our financial condition and results of operations are based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires us to make estimates and judgments that materially affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent liabilities. We evaluate our estimates on a continuous basis. We base our estimates on historical data, terms of existing contracts, our evaluation of trends in the information display and 3D sensing industries, information provided by our current and prospective customers and strategic partners, information available from other outside sources and on various other assumptions we believe to be reasonable under the circumstances. The results form the basis for making judgments regarding the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

We believe the following key accounting policies require significant judgments and estimates used in the preparation of our consolidated financial statements.

We recognize revenue when: (i) persuasive evidence of an arrangement exists, (ii) delivery has occurred and there are no uncertainties regarding customer acceptance, (iii) fees are fixed or determinable, and (iv) collection is reasonably assured.

We generate revenue from many sources and activities. We enter into arrangements that can include various combinations of product sales, services, and licensing activities. For multiple- element arrangements, we use a hierarchy to determine the contract consideration to be used for allocating revenue to deliverables: (i) vendor-specific objective evidence of fair value (VSOE), (ii) third party evidence of selling price (TPE), and (iii) best estimate of selling price. To date, our revenue sources can be classified as: product revenue, royalty revenue, contract revenue, or development revenue.

Our product sales generally include acceptance provisions. We recognize product revenue upon acceptance of the product by the customer or expiration of the contractual acceptance period, after which there are no rights of return. No estimates are made for product returns because revenue is recognized upon expiration of the contractual acceptance period.

We recognize revenue on upfront license fees over the expected time frame that we provide services or have ongoing obligations under the agreement. Ongoing per unit royalties are recognized when reported by our customer to us on a quarterly basis. Currently, we recognize revenue for ongoing per unit royalties one quarter in arrears when reported by our customer, representing when such amounts are fixed and determinable, and all other revenue recognition criteria are met.

Our contract revenue in a particular period is dependent upon when we enter into a contract, the value of the contracts we have entered into, and the availability of technical resources to perform work on the contracts.

We recognize contract revenue related to the sale of prototype units and evaluation kits upon acceptance of the deliverables by the customer or expiration of the contractual acceptance period, after which there are no rights of return.

17

We recognize contract revenue on long-term, cost plus fixed fee, and fixed price contracts using the percentage-of-completion method. Under the percentage-of-completion method, revenue is recognized as work progresses on the contract. The percentage-of-completion method relies on estimates of total expected contract revenue and costs. At the end of each period, we estimate the labor, material and other costs required to complete the contract using data provided by our technical team, project managers, vendors, outside consultants and others and compare these to costs incurred to date.

Recognized revenues are subject to amendments for actual costs incurred. Amendments to revenue and costs to complete estimates are recognized in the period in which the facts become known. In the future, amendments to estimates could significantly impact recognized revenue in any one reporting period. If we are unable to estimate costs on a contract, revenue is recognized using the completed-contract method. Under the completed-contract method, revenue and contract costs are deferred and both are recognized when all deliverables are completed.

We evaluate the performance criteria and terms of our collaborative research and development agreements to determine whether revenue should be recognized under a performance-based method or milestone method. Significant items covered in our evaluation include the following:

• The nature of our obligation under the agreement;
• Whether provisions leading to variable revenues exist;
• Whether any payments are refundable;
• Whether the deliverables should be treated as a single unit of accounting or separated into multiple units;
• Whether substantive milestones exist;
• Whether milestone payments are commensurate with either our level of effort or the increase in value of the customer's rights; and
• Whether a licensing agreement exists.

At the end of each period, we evaluate total estimated costs for each agreement. Amendments to the estimated costs are recognized in the period in which the facts become known. Any related costs for work performed under collaborative research and development agreements are expensed in the periods incurred and included in the Statement of Operations in research and development expense.

In March 2015, we signed a license agreement as part of a multiple-element arrangement with Sony for our PicoP® scanning technology. The license agreement granted Sony a non-exclusive license to manufacture and sell scanning engines that use our PicoP® scanning technology.

For multiple-element arrangements, we use a hierarchy to determine the contract consideration to be used for allocating revenue to deliverables: (i) vendor-specific objective evidence of fair value (VSOE), (ii) third party evidence of selling price (TPE) and (iii) best estimate of selling price. Because VSOE and TPE do not exist for the March 2015 agreement, we have allocated the contract consideration based on our best estimate.

Under the terms of this multiple-element arrangement, we received an $8.0 million upfront payment in March 2015 and we will receive a per unit royalty for each display module sold by Sony containing our PicoP® scanning technology. We recognize revenue on the initial $8.0 million payment on a straight-line basis within royalty revenues on the statement of operations, over a period of eight years which is the expected time frame that we will provide services under the agreement. Ongoing per unit royalties are reported by Sony to us on a quarterly basis. Currently, we recognize revenue for ongoing per unit royalties one quarter in arrears when reported by Sony, representing when such amounts are fixed and determinable, and all other revenue recognition criteria are met. Products delivered under multiple-element arrangements will be recognized upon acceptance of the deliverables by the customer or the expiration of the contractual acceptance period, after which there are no rights of return.

18

Intangible assets

Our intangible assets consist exclusively of purchased patents. The patents are amortized using the straight-line method over their estimated period of benefit, ranging from one to seventeen years. We evaluate the recoverability of intangible assets periodically by taking into account events or circumstances that may warrant revised estimates of useful lives or that indicate the asset may be impaired. We compare the projected undiscounted net cash flows associated with the related intangible assets or group of assets over their remaining lives against their respective carrying amounts. Measurement of an impairment loss for our intangible assets is based on the difference between the fair value of the asset and its carrying value.

Inventory valuation

Inventory is computed using the first-in, first-out (FIFO) method and is stated at the lower of cost and net realizable value. We make judgments and estimates to value our inventory and make adjustments to its carrying value. We review several factors in determining the market value of our inventory including: evaluating the replacement cost of the raw materials, the net realizable value of the finished goods, and the likelihood of obsolescence. If we do not achieve our targeted sales prices, if market conditions for our components or products were to decline, or if we do not achieve our sales forecast, additional reductions in the carrying value of the inventory would be required.

We provide a warranty on scanning engines and components incorporating our PicoP® scanning technology, and we accrue warranty reserves at the time revenue is recognized. Warranty reserves include management's best estimate of the projected costs to repair or to replace any items under warranty based upon the actual units of revenue recognized in the period. We review our reserves each period to ensure that our accruals are adequate in meeting expected future warranty obligations, and we will adjust our estimates as needed. These estimates are inherently uncertain and changes to our historical or projected experience may cause material changes to our warranty reserves in the future.

We issue share-based compensation to employees in the form of stock options and restricted stock units (RSUs). We account for the share-based awards by recognizing the fair value of share-based compensation expense on a straight-line basis over the service period of the award, net of estimated forfeitures. The fair value of stock options is estimated on the grant date using the Black-Scholes option pricing model. The fair value of RSUs is determined by the closing price of our common stock on the grant date. Changes in estimated inputs or using other option valuation methods may result in materially different option values and share-based compensation expense.

Significant judgment is required in evaluating our tax position and in determining our provision for income taxes, our deferred tax assets and liabilities and any valuation allowance recorded against our net deferred tax assets. We record a valuation allowance when necessary to reduce deferred tax assets to the amount expected to be realized. Based on our history of losses since inception, the available objective evidence creates sufficient uncertainty regarding the realizability of the deferred tax assets. Our actual tax exposure may differ from our estimates and any such differences may impact income our tax expense in the period in which such determination is made.

The key accounting policies described above are not intended to be a comprehensive list of all of our accounting policies. In many cases, the accounting treatment of a particular transaction is specifically dictated by generally accepted accounting principles, with no need for us to apply judgment or make estimates. There are also areas in which our judgment in selecting any available alternative would not produce a materially different result to our consolidated financial statements. Additional information about our accounting policies, and other disclosures required by generally accepted accounting principles, are set forth in the notes to our consolidated financial statements.

Inflation has not had a material impact on our revenues or income from continuing operations over the three most recent fiscal years.

19

Results of Operations

Product revenue is revenue from sales of our products, which are MEMS and ASICS. Product revenue was higher during the year ended December 31, 2016, compared to the same period in 2015, due to higher product sales to Sony as part of continued shipments of orders we received during 2015 and 2014 totaling $14.6 million and $3.8 million, respectively, for key components to be integrated into display modules it manufactures and sells. During 2016, we completed delivery of all outstanding orders from Sony and the backlog of product orders at December 31, 2016 was zero compared to $11.0 million at December 31, 2015.

Royalty revenue is revenue derived from license agreements to our PicoP® scanning technology. Royalty revenue was higher during the year ended December 31, 2016, compared to the same period in 2015, as a result of higher royalty payments we received from Sony for display modules it sold.

During the year ended December 31, 2016, we recognized $801,000 from ongoing per unit royalties, and $1.0 million from a prorated portion of the $8.0 million upfront payment. During the year ended December 31, 2015, we recognized $316,000 from ongoing per unit royalties, and $849,000 from a prorated portion of the $8.0 million upfront payment. At December 31, 2016, remaining unrecognized upfront license fees are included in current and long-term deferred revenues, amounting to $999,000 and $5.1 million, respectively. At December 31, 2015, unrecognized upfront license fees are included in current and long-term deferred revenues, amounting to $1.0 million and $6.1 million, respectively.

Contract revenue includes revenue from support service contracts and the sale of prototype units and evaluation kits based on our PicoP® scanning engine. In June 2015, we recognized the full contract value of $1.5 million in revenue having completed all deliverables and obligations under an agreement to provide support services to Sony for the production readiness, initial production and market launch for display modules incorporating our PicoP® scanning technology.

The contract backlog, including orders for prototype units and evaluation kits, at December 31, 2016 was $942,000 compared to $45,000 at December 31, 2015, and is scheduled for completion during the next twelve months.

20

Cost of product revenue includes the direct and allocated indirect costs of products sold to customers. Cost of product revenue can fluctuate significantly from period to period, depending on the volume and product mix and the level of manufacturing overhead expense. Cost of product revenue as a percentage of net product revenue decreased during the year ended December 31, 2016, compared to 2015, driven primarily by a significant increase in product deliveries to Sony.

During the year ended December 31, 2016, we expensed approximately $1.1 million of manufacturing overhead associated with production capacity in excess of production requirements, compared to $873,000 in 2015. Additionally, during the year ended December 31, 2016, we recorded a provision for scrap of $187,000 compared to $287,000 in 2015.

Cost of contract revenue includes both the direct and allocated indirect costs of performing on contracts and producing prototype units and evaluation kits based on our PicoP® scanning engines. The decrease in cost of contract revenue for the year ended December 31, 2016, compared to 2015, was primarily attributed to reduced contract activity compared to the prior year.

Research and development expense consists of compensation related costs of employees and contractors engaged in internal research and product development activities, direct material to support development programs, laboratory operations, outsourced development and processing work, and other operating expenses. We assign our research and development resources based on the business opportunity of the available projects, the skill mix of the resources available and the contractual commitments we have made to our customers.

The increase in research and development expense during the year ended December 31, 2016, compared to 2015, was attributable to the allocation of resources to internal research and development activities that were previously designated to a commercial contract in prior periods in addition to higher costs related to subcontractors and increased personnel-related compensation and benefits expenses.

We believe that a substantial level of continuing research and development expense will be required to further develop our PicoP® scanning technology.

Sales, marketing, general and administrative expense includes compensation and support costs for marketing, sales, management and administrative staff, and for other general and administrative costs, including legal and accounting services, consultants and other operating expenses.

21

Gain on sale of previously reserved inventory includes the sales of excess component inventory for discontinued products that was fully reserved in prior periods. The activity during the years ended December 31, 2016 and 2015 was primarily the sale of previously reserved excess component inventory.

Product revenue was higher during the year ended December 31, 2015, than the same period in 2014, due to higher product sales to Sony as part of continued shipments of orders we received during 2015 and 2014 totaling $14.6 million and $3.8 million, respectively, for key components to be integrated into display modules it manufactures and sells. The backlog of product orders at December 31, 2015 was $11.0 million compared to $3.6 million at December 31, 2014. All backlog at December 31, 2015 was fulfilled during 2016.

Royalty revenue was higher during the year ended December 31, 2015, compared to the same period in 2014, as a result of the prorated revenue that was recognized from the $8.0 million upfront license fee we received from Sony in March 2015 and ongoing per unit royalties on display modules it sells.

During the year ended December 31, 2015, we recognized $316,000 from ongoing per unit royalties, and $849,000 from a prorated portion of the $8.0 million upfront payment. During the year ended December 31, 2014, we recognized $40,000 from ongoing per unit royalties.

During the year ended December 31, 2015, we recognized the full contract value of $1.5 million in revenue, having completed all deliverables and obligations under the agreement. During the year ended December 31, 2014, our contract revenue included the delivery of prototype units to customers in the automotive and consumer electronics industries, as well as the delivery of customized scanning engines to a worldwide logistics company during the third quarter of that year.

The contract backlog, including orders for prototype units and evaluation kits, at December 31, 2015 was $45,000 compared to $1.5 million at December 31, 2014.

Development revenue

In March 2013, we entered into a $4.6 million collaborative research and development agreement with Sony to incorporate our PicoP® scanning technology into a display module that could enable a variety of new products. As of September 30, 2014, we had completed all deliverables and obligations under the collaborative research and development agreement and had recognized the full contract value of $4.6 million. Based on the terms of this agreement, we recognized development revenue as work progressed on the agreement and as our customer accepted the deliverables using a proportional method based on the lesser of the cumulative proportion of total estimated costs to be incurred under the agreement versus the cash payments received plus outstanding billings for work accepted by the customer.

22

Cost of product revenue

Cost of product revenue was higher during the year ended December 31, 2015, than the same period in 2014, as a result of higher volume of product sales to Sony.

The decrease in cost of contract revenue during the year ended December 31, 2015 was primarily attributed to reduced contract activity compared to the prior year.

Sales, marketing, general and administrative expense

The increase in sales, marketing, general and administrative expense during the year ended December 31, 2015, compared to 2014, was primarily attributed to increased business development payroll costs and higher outsourced professional and contract services costs.

The activity during the years ended December 31, 2015 and 2014 was primarily the sale of previously reserved excess component inventory.

In February 2014, we issued 3.7 million shares of our common stock under the exchange provisions of our then-outstanding warrants. During the year ended December 31, 2014, we recorded a loss of $5.0 million on the exchange as the fair market value of the common stock issued was greater than the obligation recorded due to an increase in our stock price from December 31, 2013 to the date the warrants were exchanged.

23

Income taxes

No provision for income taxes has been recorded because we have experienced net losses from inception through December 31, 2016. At December 31, 2016, we had net operating loss carryforwards of approximately $371.6 million for federal income tax reporting purposes. In addition, we have research and development tax credits of $7.0 million. The net operating loss carryforwards and research and development credits available to offset future taxable income, if any, will expire in varying amounts from 2018 to 2036, if not previously used.

In addition to the tax benefits above, we have $310,000 of capital loss carryforwards that are scheduled to expire in 2017. In certain circumstances, as specified in the Internal Revenue Code, a 50% or more ownership change by certain combinations of our shareholders during any three year period would result in a limitation on our ability to use a portion of our net operating loss carryforwards.

We recognize interest accrued and penalties related to unrecognized tax benefits in tax expense. We did not have any unrecognized tax benefits at December 31, 2016 or at December 31, 2015.

We have incurred significant losses since inception. We have funded operations to date primarily through the sale of common stock, convertible preferred stock, warrants, the issuance of convertible debt and, to a lesser extent, from development contract revenues, product sales, and licensing activities. At December 31, 2016, we had $15.1 million in cash and cash equivalents.

Based on our current operating plan, and without additional proceeds from the sale of shares under our existing Common Stock Purchase Agreement or ATM facility discussed in Note 8, we anticipate that we have sufficient cash and cash equivalents to fund our operations into the third quarter of 2017. We will require additional capital to fund our operating plan past that time. We plan to obtain additional capital through the issuance of equity or debt securities, product sales and/or licensing activities. There can be no assurance that additional capital will be available or that, if available, it will be available on terms acceptable to us on a timely basis. If adequate capital resources are not available on a timely basis, we intend to consider limiting our operations substantially. This limitation of operations could include reducing our planned investment in development projects, staff, operating costs, capital expenditures and investments in research and development. Our ability to raise proceeds from the sale of shares under our Common Stock Purchase Agreement is subject to limitations and conditions, including a $1.00 minimum stock price. In connection with our December 2016 underwritten public offering, we also agreed in the underwriting agreement not to issue shares pursuant to the Common Stock Purchase Agreement, or any other arrangement with Lincoln Park, for a period of six months from the date thereof without the consent of the underwriter.

These factors raise substantial doubt regarding our ability to continue as a going concern. These financial statements were prepared assuming we will continue as a going concern and do not include any adjustments that might be necessary should we be unable to continue as a going concern.

Cash used in operating activities totaled $14.8 million during 2016, compared to $5.8 million in 2015, and $13.0 million in 2014. The change in cash flows from operating activities in 2015 primarily reflects an $8.0 million upfront payment we received under the terms of the license agreement with Sony for our PicoP® scanning technology. Cash used in operating activities resulted primarily from cash used to fund our net loss, after adjusting for non-cash charges such as realized gains and losses on warrant exchange, share-based compensation, depreciation and amortization charges and changes in operating assets and liabilities.

Cash used in investing activities totaled $891,000 in 2016, compared to $1.1 million in 2015, and $173,000 in 2014. Purchases of property and equipment totaled $895,000 in 2016, compared to $1.1 million in 2015, and $207,000 in 2014. We received proceeds totaling $4,000 from the sale of property and equipment during 2016. There was no activity in the sale of property and equipment during 2015, compared to sales proceeds of $34,000 in 2014.

24

Financing activities

Cash provided by financing activities totaled $23.0 million in 2016, compared to $6.5 million in 2015, and $16.1 million in 2014. Principal payments under capital leases and long-term debt was $15,000 in 2016, zero in 2015, and $15,000 in 2014.

The following is a list of our financing activities during 2016, 2015 and 2014.

• In December 2016, we raised approximately $2.1 million before issuance costs of approximately $18,000 through a registered direct offering of 2.0 million shares of our common stock.
• In December 2016, we raised approximately $13.0 million before issuance costs of approximately $1.2 million through an underwritten public offering of approximately 12.1 million shares of our common stock.
• In September 2016, we entered into a Common Stock Purchase Agreement with Lincoln Park Capital Fund, LLC (Lincoln Park) granting us the right to sell shares of our common stock having an aggregate value of up to $17.0 million. Under the terms of the agreement, Lincoln Park made an initial purchase of $2.0 million in shares of common stock at a purchase price of $1.50 per share. Subject to various limitations and conditions set forth in the agreement, including a $1.00 minimum stock price, we may sell up to an additional $15.0 million in shares of common stock, from time to time, at our sole discretion to Lincoln Park over a twenty-four month period beginning September 2016. In consideration for entering into the agreement, we issued 522,556 shares of common stock, having a value of $721,000 based on the closing stock price on the date of grant, to Lincoln Park as a commitment fee. We incurred an additional $133,000 in issuance costs. As of December 31, 2016, $15.0 million in shares of common stock remain available under our Common Stock Purchase Agreement.
• In March 2016, we raised approximately $6.9 million before issuance costs of approximately $650,000 through an underwritten public offering of approximately 4.1 million shares of our common stock. The offering included the exercise in full of the underwriter's option to purchase up to an additional 529,411 shares of our common stock.
• In May 2015, we entered into an ATM agreement with Meyers Associates, L.P. Under the terms of the agreement, we may, from time to time, at our discretion, offer and sell shares of our common stock having an aggregate value of up to $6.0 million. As of December 31, 2016, we have received gross proceeds of approximately $3.1 million before issuance costs of approximately $109,000 from the sale of 1.2 million shares of our common stock.
• During the year ended December 31, 2015, we received approximately $3.3 million from the exercise of warrants to purchase 1.5 million shares of our common stock, which warrants were issued in connection with earlier financing transactions.
• During the three months ended March 31, 2015, we received gross proceeds of $1.0 million as part of an ATM agreement we entered into with Meyers Associates, L.P. in June 2014. We have completed sales under this agreement, having received total proceeds of approximately $4.5 million before issuance costs of approximately $206,000 from the sale of 2.0 million shares of our common stock.
• In March 2014, we raised approximately $13.9 million before issuance costs of approximately $1.0 million through an underwritten public offering of 7.2 million shares of our common stock and warrants to purchase 2.1 million shares of our common stock.

Our capital requirements will depend on many factors, including, but not limited to, the rate at which ODMs and OEMs introduce products incorporating our PicoP® scanning technology and the market acceptance and competitive position of such products. Our ability to raise capital will depend on numerous factors, including the following:

• Market acceptance of products incorporating our PicoP® scanning technology;
• Changes in evaluations and recommendations by any securities analysts following our stock or our industry generally;
• Announcements by other companies in our industry;
• Changes in business or regulatory conditions;
• Announcements or implementation by our competitors of technological innovations or new products;
• The status of particular development programs and the timing of performance under specific development agreements;
• Economic and stock market conditions;
• The cost of filing, prosecuting, defending and enforcing any patent claims and other intellectual property rights;
• Our ability to establish cooperative development, joint venture and licensing arrangements; or
• Other factors unrelated to our company or industry.

25

If we are successful in establishing ODM or OEM co-development and joint venture arrangements, we expect our partners to fund certain non-recurring engineering costs for technology development and/or for product development. Nevertheless, we expect our capital requirements to remain high as we expand our activities and operations with the objective of commercializing our PicoP® scanning technology.

The following table lists our contractual obligations as of December 31, 2016 (in thousands):

See Note 2, "Summary of significant accounting policies," in the Notes to the consolidated financial statements found in Part II, Item 8 of this Form 10-K.

As of December 31, 2016, all of our cash and cash equivalents have variable interest rates. Therefore, we believe our exposure to market and interest rate risks is not material.

Our investment policy generally directs that the investment managers should select investments to achieve the following goals: principal preservation, adequate liquidity, and return. As of December 31, 2016, our cash and cash equivalents are comprised of short-term highly rated money market savings accounts. The values of cash and cash equivalents as of December 31, 2016, are as follows (in thousands):

Our major contract and collaborative research and development agreements, product sales, and licensing activity payments are currently made in U.S. dollars. However, in the future we may enter into contracts or collaborative research and development agreements in foreign currencies that may subject us to foreign exchange rate risk. We have entered into purchase orders and supply agreements in foreign currencies in the past and may enter into such arrangements, from time to time, in the future. We believe our exposure to currency fluctuations related to these arrangements is not material. We may enter into foreign currency hedges to offset material exposure to currency fluctuations when we can adequately determine the timing and amounts of the exposure.

26

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

27

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Shareholders of
MicroVision, Inc.

We have audited the accompanying consolidated balance sheets of MicroVision, Inc. (the "Company") as of December 31, 2016, and the related consolidated statements of operations, shareholders' equity (deficit), and cash flows for each of the three years in the period ended December 31, 2016. Our audits also included the financial statement schedule listed in the Index at Item 15(A). These consolidated financial statements and financial statement schedule are the responsibility of the Company's management. Our responsibility is to express an opinion on these consolidated financial statements and financial statement schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the consolidated financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall consolidated financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the consolidated financial position of MicroVision, Inc. as of December 31, 2016 and 2015, and the consolidated results of its operations and its cash flows for each of the three years in the period ended December 31, 2016, in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, such financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

The accompanying consolidated financial statements have been prepared assuming the Company will continue as a going concern. As discussed in Note 1 to the consolidated financial statements, the Company has incurred losses from operations and has an accumulated deficit, which raises substantial doubt about its ability to continue as a going concern. Management's plans regarding these matters are also described in Note 1. The consolidated financial statements do not include any adjustments that might result from the outcome of this uncertainty.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), MicroVision, Inc.'s internal control over financial reporting as of December 31, 2016, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated March 6, 2017 expressed an unqualified opinion thereon.

/s/ Moss Adams LLP

Seattle, Washington
March 6, 2017

28

MicroVision, Inc.
Consolidated Balance Sheets
(In thousands)

29

MicroVision, Inc.
Consolidated Statements of Operations
(In thousands, except per share data)

30

MicroVision, Inc.
Consolidated Statements of Shareholders' Equity (Deficit)
(In thousands)

31

MicroVision, Inc.
Consolidated Statements of Cash Flows
(In thousands)