UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, DC 20549

FORM 10‑K

 

Commission file number: 001‑36182

Xencor, Inc.

(Exact Name of Registrant as Specified in its Charter)

 

(626) 305‑5900

(Registrant’s Telephone Number, Including Area Code)

Securities registered pursuant to Section 12(b) of the Act:

 

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well‑known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐   No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes ☐   No ☒

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒   No ☐

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S‑T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ☒  No ☐

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S‑K is not contained herein, and will not be contained, to the best of the registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10‑K or any amendment to this Form 10‑K. ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non‑accelerated filer or a smaller reporting company. See definitions of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b‑2 of the Exchange Act.

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b‑2 of the Securities Exchange Act of 1934). Yes ☐   No ☒

The aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold as of June 30, 2015 was $490,431,477

The number of outstanding shares of the registrant’s common stock, par value $0.01 per share, as of February 26, 2016 was 40,582,039.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s proxy statement to be filed with the Securities and Exchange Commission pursuant to Regulation 14A in connection with the registrant’s 2016 Annual Meeting of Stockholders, which will be filed subsequent to the date hereof, are incorporated by reference into Part III of this Form 10‑K. Such proxy statement will be filed with the Securities and Exchange Commission not later than 120 days following the end of the registrant’s fiscal year ended December 31, 2015.

 

 

Xencor, Inc.

FORM 10‑K

For the Fiscal Year Ended December 31, 2015

Table of Contents

 

The Xencor logo is a trademark of Xencor, Inc. XmAb, PDA and Protein Design Automation are also registered trademarks of Xencor. All other product and company names are trademarks of their respective companies.

PART I

Forward‑Looking Statements

This Annual Report on Form 10‑K or this Annual Report, may contain “forward‑looking statements” within the meaning of the federal securities laws made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. We have based these forward‑looking statements largely on our current expectations and projections about future events and financial trends affecting the financial condition of our business. Forward‑looking statements should not be read as a guarantee of future performance or results, and will not necessarily be accurate indications of the times at, or by, which such performance or results will be achieved. Forward‑looking statements are based on information available at the time those statements are made and/or management’s good faith belief as of that time with respect to future events, and are subject to risks and uncertainties that could cause actual performance or results to differ materially from those expressed in or suggested by the forward‑looking statements. Our actual results could differ materially from those anticipated in these forward‑looking statements as a result of various factors, including those set forth below under Part I, Item 1A, “Risk Factors” in this Annual Report. These statements, which represent our current expectations or beliefs concerning various future events, may contain words such as “may,” “will,” “expect,” “anticipate,” “intend,” “plan,” “believe,” “estimate” or other words indicating future results. Such statements may include, but are not limited to, statements concerning the following:

Given these uncertainties, you should not place undue reliance on these forward‑looking statements. These forward‑looking statements represent our estimates and assumptions only as of the date of this Annual Report on Form 10‑K and, except as required by law, we undertake no obligation to update or revise publicly any forward‑looking statements, whether as a result of new information, future events or otherwise after the date of this Annual Report on Form 10‑K. We qualify all of our forward‑looking statements by these cautionary statements.

Item 1.  Business.

Our Business

We are  a clinical‑stage biopharmaceutical company focused on discovering and developing engineered monoclonal antibody therapeutics to treat severe and life‑threatening diseases with unmet medical needs. We use our proprietary XmAb® technology platform to create next‑generation antibody product candidates designed to treat autoimmune and allergic diseases, cancer and other conditions. In contrast to conventional approaches to antibody design, which focus on the portion of antibodies that interact with target antigens, we focus on the portion of the antibody that interacts with multiple segments of the immune system and controls antibody structure. This portion, referred to as the Fc domain, is constant and interchangeable among antibodies. Our engineered Fc domains, the XmAb technology, can be readily substituted for natural Fc domains.

We believe our Fc domains enhance antibody performance by, for example, increasing immune inhibitory activity, improving cytotoxicity, extending circulating half‑life or stabilizing novel antibody structures, while maintaining 99.5% identity in structure and sequence to natural antibodies. By improving over natural antibody function, we believe that our XmAb‑engineered antibodies offer innovative approaches to treating disease and potential clinical advantages over other treatments.  The newest aspect of our platform is the XmAb bispecific Fc domains, which enable the rapid design and simplified development of antibodies that bind two or more antigens simultaneously.  Bispecifics are a rapidly emerging area of biotherapeutics development, particularly in immuno-oncology, and we have used our XmAb bispecific Fc domains as a robust scaffold for a pipeline of new bispecific oncology candidates that recruit immune cells against tumors.

We have two wholly owned, clinical stage product candidates, XmAb5871, which is being developed for autoimmune disease and XmAb7195, which is being developed for asthma and allergic diseases.  We also have two wholly owned oncology product candidates expected to start clinical trials in 2016, XmAb14045 for the treatment of acute myeloid leukemia and XmAb13676 for B-cell malignancy.  These product candidates all use XmAb Fc domains to confer enhanced antibody functionality. 

Our business strategy is based on the plug‑and‑play nature of the XmAb technology, allowing us to create new antibody drug candidates for our internal development or licensing, or to selectively license access to one or more of our XmAb technologies to pharmaceutical or biotechnology companies to use in developing their own proprietary antibodies with improved properties.  These licensing transactions provide us with multiple revenue streams that help fund development of our wholly owned product candidates and usually require limited resources or efforts from us.  There are currently nine antibody product candidates in clinical trials that have been engineered with XmAb technology, including seven candidates being advanced by licensees and development partners.

Our protein engineering capabilities allow us to continue to expand the functionality of the XmAb technology platform to identify new protein enhancements and create new antibody drug candidates with improved properties. The most recent addition to our technology, heterodimer Fc domains, enable the creation of bispecific drug candidates, which are antibodies that are engineered to bind two targets simultaneously. The core of our bispecific programs is a novel Fc domain that is a robust and portable scaffold for two, or potentially more, different antigen binding domains. Our Fc domain technology is designed to maintain full-length antibody properties in a bispecific antibody, potentially enabling stable molecules with favorable in vivo half-life and allowing for the use of standard antibody production methods.  These bispecific Fc domains are being used to rapidly generate a broad array of novel drug candidates for our own pipeline and for our partners.

We were founded in 1997 based on protein engineering technology developed by our co-founders Bassil Dahiyat, Ph.D. and Stephen Mayo, Ph.D. at the California Institute of Technology. We began our first therapeutic monoclonal antibody engineering and discovery programs in 2002 and entered into our first XmAb technology license in 2004.

Our Wholly-Owned Compounds

Our XmAb technology has created a suite of wholly owned compounds: two XmAb compounds that are currently in clinical trials and two XmAb bispecific compounds that we plan to begin clinical trials in 2016. Additional earlier-stage compounds are in development by us as well.

Compounds Wholly-Owned by Xencor

 

XmAb5871 uses our XmAb Immune Inhibitor Fc Domain and targets B cells, an important component of the immune system. We believe that XmAb5871 has the potential to address a key unmet need in autoimmune therapies due to its combination of potent B-cell inhibition without B-cell depletion.

In June 2015, we announced results from a Phase 1b/2a  placebo-controlled trial of XmAb5871 in patients with rheumatoid arthritis (RA).  The results indicated that XmAb5871 was safe and generally well tolerated.  Although the trial was not designed to observe a statistically significant difference in efficacy results between XmAb5871 and placebo treated patients, sufficient efficacy trends were seen to warrant continued clinical development of XmAb5871 in autoimmune indications. A numerically increased proportion of patients with improvements across several measurements of disease activity were observed in the XmAb5871 treated groups compared to placebo.  

We are currently enrolling two Phase 2 trials for XmAb5871, one in IgG4-Related Disease (IgG4-RD) and a trial in Systemic Lupus Erythematosus (SLE or Lupus). We also intend to initiate a Phase 1 trial with a subcutaneous formulation of XmAb5871 in 2016.

IgG4-RD: we are currently enrolling a Phase 2 open-label pilot study of XmAb5871 for IgG4-RD. The current trial design is to enroll approximately 24 patients with scheduled treatment up to 24 weeks. The primary objective of the study is to evaluate the effect of every other week IV administration of XmAb5871 using the recently reported IgG4-RD Responder Index in patients with active IgG4-RD. Secondary objectives are to determine the safety and tolerability profile and to characterize the pharmacokinetics (PK) and immunogenicity of every other week IV administration of XmAb5871.  IgG4-RD is a rare fibro-inflammatory autoimmune disorder that we estimate impacts up to 40,000 patients in the United States. IgG4-RD affects multiple organ systems and is characterized by the distinct microscopic appearance of disease organs, including dense presence of IgG4-positive plasma cells that is required for diagnosis. This objective diagnostic criterion is atypical for autoimmune diseases and offers advantages for accurately identifying patients. There are currently no approved therapies for this newly recognized disorder and corticosteroids are the current standard of care.

Systemic Lupus Erythematosus (SLE): we are also enrolling a Phase 2 randomized, double blinded, placebo-controlled study of XmAb5871in SLE.  This trial is designed to assess the effect of XmAb5871 on SLE disease activity in a shorter timeframe and using fewer patients compared to standard SLE trials, and XmAb5871 is the first newly developed agent being assessed with this novel trial design.  The trial design calls for treating patients with moderate to severe, non-organ threatening SLE with XmAb5871 (or placebo) after their lupus disease activity has improved with a short course of intra-muscular (IM) steroid therapy. Background, potentially confounding, immunosuppressant medications will be stopped. In this double-blinded placebo-controlled study, the ability of XmAb5871 to maintain the improvement in disease activity after IM steroid therapy and in the absence of immunosuppressant medication will be assessed.  Historically, SLE trial designs generally add new medications to the many already taken by the patient, and hence display a discernible treatment effect only when restricted to the sickest patients.  The trial will enroll approximately 90 subjects, 1:1 randomized to XmAb5871 or placebo, for up to 24 weeks.

The unmet need in lupus remains high for the estimated 240,000 Americans with a lupus diagnosis. Lupus is a serious and potentially fatal disease that mainly affects women. It is an autoimmune disease that affects many parts of the body, including the joints, skin, kidneys, heart, lungs, blood vessels and brain. Patients are often subject to

prolonged use of systemic corticosteroids and potent immunosuppressive agents with significant short and long term side effects. Current biologic treatments are limited by their modest efficacy or safety risks.  Because B cells play a significant role in SLE pathogenesis, we believe that XmAb5871is a potential treatment.  In addition to data from the Phase 1b/2a trial in RA, we have published ex vivo results showing XmAb5871 inhibition of SLE patient B cell activation and humoral immunity supporting the investigation of XmAb5871 as a potential SLE therapy. 

XmAb7195 uses our Immune Inhibitor Fc Domain and is being developed for the treatment of severe asthma and allergic diseases. XmAb 7195 is designed to reduce blood serum levels of IgE, which mediates allergic responses and allergic disease. In January 2015, we reported top-line interim data from Part 1 of the Phase 1a trial of XmAb7195, in which healthy volunteers received a single dose.  Data showed rapid reduction of free IgE levels to below the limit of detection in 90% of treated subjects, including those treated at the lowest dose evaluated of 0.3 mg/kg, with parallel reductions in total IgE. Two subjects with high pre-dose IgE levels (above 400 IU/mL) were treated with XmAb7195, one each at 0.75 mg/kg and 3.0 mg/kg doses, and both had reduction of free IgE levels to below the limit of detection lasting for at least one week.    A dose limiting toxicity of transient, asymptomatic thrombocytopenia (low blood platelet count) was observed at the 3.0 mg/kg dose. The decrease in platelet count was transient with a minimum by 24 hours post-dose, recovery starting by 48 hours post-dose and near full platelet count recovery by study Day 8 in all cases, at which time serum drug concentrations still exceeded levels that eliminate detectable IgE.   Moderate urticaria (hives) was reported in a total of seven XmAb7195 treated subjects with an apparent correlation of dose with frequency of occurrence. In all cases regardless of dose, the signs/symptoms of urticaria were mild, non-diffuse and easily treated with oral antihistamine, and the study drug infusions were continued to completion without worsening of symptoms. In 2015, we continued the Phase 1a trial of XmAb7195, treating subjects with high baseline IgE levels, and in June 2015, we announced an expansion of the trial, adding cohorts of subjects that receive two doses of XmAb7195. The new part of this trial will allow Xencor to examine IgE reduction and the safety of XmAb7195 after a second infusion. Complete data from this study are expected in the first half of 2016. We also plan on initiating a multi-dose Phase 1 trial for XmAb7195 with a subcutaneous formulation in healthy volunteers. 

XmAb14045 uses our XmAb bispecific Fc technology that allows us to create dual-antigen targeting molecules. We plan to initiate clinical trials for XmAb14045, our first bispecific oncology candidate, for the treatment of acute myeloid leukemia (AML) in 2016.  XmAb14045 targets CD123, an antigen on AML cells and leukemic stem cells, and CD3, an activating receptor on T cells.  The trial will be a Phase 1, open-label, multiple-dose, dose escalation study to assess safety, tolerability and preliminary anti-tumor activity in AML.

XmAb13676 is our second bispecific oncology candidate and is expected to enter clinical trials in 2016.   It targets CD20, an antigen on B-cell tumors, and CD3 for the treatment of B-cell malignancies and is a tumor-targeted antibody that contains both a tumor antigen binding domain (CD20) and a cytotoxic T-cell binding domain (CD3).  The trial will be a Phase 1, open-label, multiple-dose, dose escalation study to assess safety, tolerability and preliminary anti-tumor activity in B-cell malignancies. 

Our Out-licensed Compounds

 

In addition to our wholly-owned compounds in clinical development, we have used our XmAb technology to create antibody compounds which have been licensed to other pharmaceutical and biotechnology companies for further development.  These licensed compounds do not require additional development effort by us as they advance into development by our partners.  If successful, these candidates will generate additional milestone payments and royalties to support our internal development efforts. These include XmAb5574/MOR208 (now MOR208) licensed to MorphoSys AG (MorphoSys), and XmAb13551, a bispecific CD38 x CD3 preclinical candidate, which we developed and licensed to Amgen Inc. (Amgen).

 

Xencor Out-licensed Compounds

 

 

MOR208 is an antibody drug candidate originally created by us and developed through a Phase 1 clinical trial.  It incorporates our XmAb Cytotoxic Fc Domain. Pursuant to a Collaboration and License Agreement (MorphoSys Agreement) with MorphoSys AG (MorphoSys) in June 2010, this compound is being developed by MorphoSys for the treatment of blood‑based cancers. 

MorphoSys is currently conducting Phase 2 clinical trials of MOR208 in patients with non-Hodgkin lymphomas (NHL) and chronic lymphocytic leukemia (CLL). MorphoSys has indicated that it has received fast track designation from the U.S. Food and Drug Administration (FDA) for targeting diffuse large B-cell lymphoma (DLBCL) and has announced that they intend to initiate a Phase 3 trial for this indication in 2017.   

Under the terms of the MorphoSys Agreement, we received a $13 million upfront payment and $3 million for development milestone payments in 2013. If certain developmental, regulatory and sales milestones are achieved, we are also eligible to receive up to an additional $299 million in milestone payments which are comprised as follows: $62.0 million in clinical development milestones, $187 million in regulatory approval milestones and $50 million of aggregate milestone payments for the achievement of certain product sale goals. If licensed products are commercialized, we are also entitled to receive tiered royalties in the high single‑digit to low‑teen percent range. 

The term of this agreement will continue until all of MorphoSys’ royalty payment obligations have expired unless terminated earlier.  

XmAb13551 (CD38 x CD3) is a preclinical drug candidate originally created by us and licensed to Amgen in September 2015.  It is being developed for the treatment of multiple myeloma. Xmab13551 incorporates our bispecific XmAb Fc domain and binds both the tumor antigen CD38 and a cytotoxic T-cell domain, CD3. Amgen has assumed all responsibility for further development.

Amgen licensed the worldwide development rights to XmAb 13551 as part of a September 2015 Research and License Agreement (Amgen Agreement).  We received a $45 million upfront payment and will be eligible to receive up to $355 million in milestone payments for XmAb 13551 and tiered high single to low double-digit royalties on global net sales of approved products.  Pursuant to the Amgen Agreement, Xencor will also apply its bispecific technology to five specific Amgen provided antibodies (Amgen Discovery Programs). Amgen will assume all preclinical and clinical development for each of the Amgen Discovery Program compounds that Xencor delivers to them. We will be eligible to receive up to $260.5 million in milestone payments for each Amgen Discovery Program and tiered mid to high single-digit royalties on global net sales of approved products.

The Amgen Agreement will continue on a product-by-product basis until the later of (i) the date on which a product candidate is no longer covered by certain intellectual property rights and (ii) a defined term from the first commercial sale of a product candidate. Amgen may terminate the Amgen Agreement on a program-by-program basis with prior written notice. Either party may also terminate the agreement with written notice upon the bankruptcy of or material breach by the other party, if such breach has not been cured within a defined period of receiving such notice.  We may terminate the agreement in the event of certain litigation between the parties. In the event of a termination of the CD38 and CD3 program, the rights to such program shall revert to us and Amgen will be eligible to receive tiered single digit sales royalties on the sale of products developed by us from such program.

Our Out-Licensed Technology

We selectively license our XmAb technology to other companies for use in their own internal development candidates and to potentially make next-generation improvements to their marketed products.  These licenses generally require little or no development effort by us and provide us with cash to fund our own research and development programs.  These agreements typically provide the licensee with specific rights to use one or more of our Fc technologies to be applied to their proprietary antibodies or targets. The licensee is generally responsible for all development, of any resulting product candidate. As part of these agreements, we are generally entitled to receive upfront fees, annual licensing fees, potential milestone payments and royalties on the sales of any resulting products. In connection with our collaboration with Novo Nordisk, we also received research and development funding. 

 

There are currently eight programs in development with our partners. The most advanced programs are with Alexion and CSL-Janssen, which both entered into Phase 2 stage of development in 2015.

 

Xencor Technology Licenses

 

 

 

 

Amgen

 

In September 2015, we entered into the Amgen Agreement, providing an exclusive license to our internally developed XmAb 13551 and licenses to our bispecific technology for the five proprietary Amgen Discovery Programs discussed above in Xencor Out-Licensed Compounds.

 

Alexion

In January 2013, we entered into an Option and License agreement (Alexion Agreement) with Alexion Pharmaceuticals, Inc. (Alexion), to make and use our Xtend technology against six different target programs during a five‑year research term. Alexion is responsible for conducting all research and development activities under the agreement at its own expense. In addition, we granted to Alexion an exclusive option, on a target‑by‑target basis, to obtain exclusive commercial licenses to any of the six programs.

In March 2015 we received a $500,000 milestone payment related to the achievement of a clinical development milestone with an undisclosed molecule to be used against an undisclosed target. In November 2015, Alexion exercised an option for a commercial license on an undisclosed molecule and we received a $4 million option fee. In the fourth quarter of 2015, Alexion achieved a further development milestone for an undisclosed compound and we received a $3 million milestone payment.

Absent early termination, the term of the Alexion Agreement will continue until the expiration of Alexion’s royalty payment obligations. Either party may terminate the Alexion Agreement for a material breach by the other party if such breach remains uncured for 60 days, or 30 days in the case of a non-payment breach. Alexion may terminate the agreement without cause on a target‑by‑target basis upon 90 days’ advance written notice to us.

CSL-Janssen

In February 2009, we entered into a Research License and Commercialization Agreement (the 2009 Agreement) with CSL Limited (CSL). Under the 2009 Agreement, we provided CSL with a research license to our Fc Cytotoxic technology and up to five commercial options. We received an upfront payment of $750,000 and annual license fee of $250,000 during the five year research term.  In May 2013, we entered into an amendment to the 2009 Agreement with CSL, which eliminated a contingent milestone payment requirement and reduced the royalty rate on net sales for the licensed product CSL362. The amendment provided for a payment upon signing of $2.5 million.

 

In 2013 CSL sublicensed CSL362 (now called JNJ-5602 2473) to Janssen Biotech Inc. (Janssen Biotech). In August 2015, CSL, through its sublicensee, Janssen Biotech, initiated a Phase 2 clinical trial for CSL362. As a result of the Phase 2 clinical trial initiation, we received a milestone payment of $2.5 million.

 

CSL

 

In March 2013 we entered into a second non-exclusive agreement (2013 Agreement) with CSL for a license to apply our Xtend technology to one of their compounds for which we received an upfront payment of $500,000. In March 2015, CSL notified us they were terminating the 2013 Agreement. 

 

Novo Nordisk

 

In December 2014, we entered into a Collaboration and License agreement (Novo Agreement) with Novo Nordisk A/S (Novo). Under the terms of the Novo Agreement we granted Novo a research license to use certain of our technologies including our bispecific, Immune Inhibitor, Xtend and other technologies during a two-year research term. We will provide research support for four full time employees (FTE’s) in collaboration with Novo to apply our technologies to Novo provided targets to identify compounds with improved properties. Novo has an option to extend the research term for another twelve months upon written notice to us and payment of another year of research funding. At the end of the research term, Novo will have a commercial license to develop and commercialize any new targets identified during the research term.

 

We received an upfront payment of $2.5 million and are receiving FTE funding of $1.6 million per year.

 

Boehringer Ingelheim

 

In February 2007, we entered into a research and option agreement (BI Agreement) with Boehringer Ingelheim International GmbH (BI) .Under the terms of the BI Agreement we provided a research license to our Cytotoxic XmAb technology and options to non-commercial licenses. BI elected to take options to two licenses and there are currently two compounds in Phase 1 clinical trials. 

 

Merck

 

In July 2013, we entered into a License agreement (Merck Agreement) with Merck Sharp & Dohme Corp (Merck). Under the terms of the Merck Agreement, we provided Merck with a non-exclusive commercial license to certain patent rights to our Fc domains to apply to one of their compounds.

 

We received an upfront payment of $1 million and are receiving annual maintenance fees of $100,000. In 2014 Merck initiated a Phase 1 trial and we received a $500,000 milestone.

 

 

NIH

In January 2016, we announced that the National Institutes of Health (NIH) has initiated a Phase 1 clinical trial of VRC01LS, a therapeutic antibody for the treatment of HIV that uses our Xtend antibody half-life extension technology.  VRC01LS is a humanized monoclonal antibody targeted to the CD4 binding site of HIV-1. VRC01LS is a modification of the VRC01 monoclonal antibody, which demonstrated a suppression of HIV viral load in a Phase 1 trial conducted by NIH. VRC01LS includes our Xtend technology in order to enhance antibody half-life and stability.  NIH has not entered into an agreement with us for this technology.

Our Strategy

Our goal is to become a leading biopharmaceutical company focused on developing and commercializing engineered monoclonal antibodies to treat severe and life-threatening diseases with unmet medical needs. Key elements

of our strategy are to:

 

 

Our XmAb Technology Platform

Our XmAb Fc domain technology is a platform of antibody components that enable the creation of therapeutic antibody candidates that have novel interactions with the human immune and antibody regulation systems. We developed the XmAb technology platform from a systematic effort to engineer the Fc domain of antibodies to manipulate its interactions with a variety of its natural receptors. We used our patented screening technology, consisting of algorithms and computer models of the three-dimensional structure of the Fc domain, to focus on, from the vast number of possibilities, manageable sets of possible amino acid changes that result in small modifications to the Fc domain structure which effect significant changes in antibody function and performance.

We have identified a set of Fc domains, each of which is engineered to have a specific function based on its Fc receptor binding profile, including:

In addition, we have engineered XmAb Fc domains with other properties, including rapid antigen clearance, antibody stability and multiple-antigen specificity (heterodimer). Each XmAb Fc domain consists of a naturally occurring Fc domain with a small number of amino acid changes, usually two that we found to be critical for modulating interactions with the desired Fc receptors or manipulating Fc structural organization. With such limited modifications of the natural Fc domain, XmAb‑engineered antibodies are typically over 99.5% identical in structure and sequence to natural antibodies, simplifying product development yet enhancing function. In contrast to other engineering approaches for next-generation antibodies, we believe this conservative design allows our engineered antibodies to retain the beneficial stability, pharmacokinetics, and ease of discovery of natural antibodies, as well as to allow well-validated methods for antibody manufacturing. We believe we can thereby avoid the problems many new antibody platforms have had in production and drug stability. 

 

XmAb Bispecific Domain technology

Bispecific antibodies are designed with two different variable domains to elicit biological effects that require simultaneous binding to two targets.  Previously, industry efforts at bispecific antibody design have generally been frustrated by poor molecular stability, difficulties in production and short in vivo half-life.   Our XmAb® Bispecific Fc Domain technology is designed to maintain full-length antibody properties in a bispecific antibody, potentially enabling stable molecules with favorable in vivo half-life and allowing for the use of standard antibody production methods.  These bispecific Fc domains are used to generate a broad array of novel drug candidates.

We have created Fc variants that form heterodimeric Fc domains that enable the creation of bispecific antibodies which bind to a different antigen with each of their Fv domains. We have focused our initial bispecific candidate discovery work on building a pipeline of bispecific antibodies that bind both CD3 and a tumor antigen in order to recruit cytotoxic T cells to the tumor cell. Because of the Fc domain, these bispecific antibodies retain the long half-life and ease of production typical of standard antibodies.

We intend to initiate Phase 1 clinical trials with our initial bispecific drug candidates, XmAb14045 and XmAb13676 in 2016. In 2015, we licensed to Amgen XmAb13551 and also the application of our bispecific technology to five Amgen proprietary molecules under the Amgen Agreement.

XmAb Immune Inhibitor Fc Domain technology

FcγRIIb is an inhibitory receptor that is expressed on B cells and other cells. FcγRIIb, when engaged by Fc domains, signals inside the cell to block immune response activation pathways, for example the B‑cell receptor pathway that activates in response to antigen recognition and ultimately results in the production of antibodies to antigen. We have focused on this role as an important negative feedback regulator of the B‑cell response, where its biology is well‑validated. Its expression and signaling characteristics have made it a difficult target for monoclonal antibodies, as targeting it by itself does not trigger its inhibitory properties. FcγRIIb must be associated with other specific partner proteins on the cell surface to activate its inhibitory properties. We have circumvented this problem by discovering variants of the Fc domain with enhanced binding to FcγRIIb and designed the Fv domain to target a B‑cell protein. This coupling of the two target proteins, in some cases, will trigger the inhibitory properties of FcγRIIb.

We have discovered a series of FcγRIIb immune inhibitor Fc variants with increased binding affinity to FcγRIIb of up to 400‑fold. The high affinity variant has two amino acid substitutions in the Fc domain and has been applied to create our first immune inhibitor product development candidate XmAb5871. We have also applied this high affinity Immune Inhibitor Fc Domain to our immune inhibitor development candidate, XmAb7195.

XmAb Cytotoxic Fc Domain technology

Our XmAb Cytotoxic Fc Domain technology consists of a series of variant Fc domains that improve binding to the activating Fcγ receptors. This binding improvement drives increased antibody‑dependent cell cytotoxicity (ADCC), a primary mechanism of antibody cytotoxicity. The lead Fc variant used in nearly all of our Cytotoxic Fc Domain antibody candidates is an Fc domain with two amino acid substitutions that increase affinity for FcγRIIIa, the activating receptor expressed on natural killer (NK) cells, by approximately 40‑fold. NK cells are cytotoxic lymphocytes of the innate immune system and play a major role in elimination of tumor cells and virally infected cells. Our XmAb Cytotoxic Fc Domain also increases affinity for FcγRIIa by approximately five‑fold, with potential for recruitment of other important effector cells such as macrophages, which play a role in both innate and adaptive immunity by engulfing and digesting foreign material.

Several partners and licensees are using our Cytotoxic Fc Domain in their oncology antibodies, including four programs currently in clinical trials; two programs currently in Phase 2 and two programs currently in Phase 1.

XmAb Xtend Fc Domain technology

Our XmAb Xtend Fc Domain technology consists of Fc domains designed to increase binding affinity to the receptor FcRn. FcRn is present inside lysosomes in endothelial cells lining the blood vessels and functions to rescue antibodies from the degradation that makes most proteins short‑lived in circulation. As a result of interactions with FcRn, all antibodies have half‑lives ranging from a few days to a few weeks, allowing less frequent dosing for antibody drugs than most other biologics. We have engineered a series of Fc variants that increase binding of the Fc domain to FcRn to enhance FcRn‑mediated rescue and thereby increase circulating half‑life. Our lead XmAb Xtend Fc Domain has two amino acid substitutions and has shown up to three‑fold increases of in vivo half‑life for a number of different antibodies in monkey models.

We believe extension of half‑life can be exploited to improve therapeutic antibody performance in several ways including:

There are currently two compounds that incorporate our XmAb Xtend technology in clinical trials including Alexion which achieved a clinical development milestone in 2015 with an undisclosed molecule to be used against an undisclosed target. 

Additional XmAb Fc Domains

We continue to design Fc domain variants and have identified improved functions in addition to those described above. Our goal is to remain at the forefront of antibody engineering by using our expertise in Fc domain engineering to create new functions for use in antibody therapeutics. We have Fc variants that improve complement‑dependent cytotoxicity. Other Fc variants have been engineered to eliminate binding to all Fcγ receptors, thereby creating Fc domains that have no cytotoxic effector function at all. Such domains have important use in therapeutics where no effector function is desired.

Our Research and Development Pipeline

We have used our various Fc platforms and antibody optimization capabilities to produce a growing pipeline of development candidates. These include XmAb Immune Inhibitor Fc Domain candidates designed to remove target antigens from circulation and multiple oncology candidates using our CD3 bispecific platform. We will continue to progress these candidates as additional options for clinical development by us or as out‑licensing opportunities.  We also from time to time in-license antibody technologies and compounds from other companies which we believe may allow us to create potential product candidates by incorporating our XmAb technology.  These in-licenses may require us to pay up-front fees, development and commercial milestone payments and if commercial products are approved, royalties.

Market Opportunity

 

XmAb5817:  We are currently pursuing XmAb5871development for IgG4-RD, a newly designated disorder and SLE.  IgG4-RD is a rare fibro-inflammatory autoimmune disorder that we estimate impacts approximately 40,000 patients in the United States.  IgG4-RD affects multiple organ systems and we believe is characterized by the distinct microscopic appearance of diseased organs, including the presence of IgG4-positive plasmablast cells that is required for diagnosis.  There are currently no approved therapies for IgG4-RD and glucocorticoids (hormone steroids) are the current standard of care treatment.

 

The unmet need in SLE remains high for the estimated 240,000 Americans with a lupus diagnosis. Lupus is a serious and potentially fatal disease that mainly affects women. It is an autoimmune disease that affects many parts of the body, including the joints, skin, kidneys, heart, lungs, blood vessels and brain. Patients are often subject to prolonged use of systemic corticosteroids and potent immunosuppressive agents with significant short and long term side effects.   Current biologic treatments are limited by their modest efficacy or safety risks.  Because B cells play a significant role in SLE pathogenesis, we believe that XmAb5871is a potential treatment.  In addition to data from the Phase 1b/2a trial in RA, we have published ex vivo results showing XmAb5871 inhibition of SLE patient B cell activation and humoral immunity supporting the investigation of XmAb5871 as a potential SLE therapy.  

XmAb7195: The potential indication for which we are currently pursuing XmAb7195 development is allergic asthma.  According to the CDC, asthma affects approximately one in 12 Americans, more than half of asthma sufferers have at least one attack each year and thousands of people die from asthma attacks each year. Disease severities cover a wide range, and the treatment landscape is multi-tiered for asthma patients. Patients with mild and moderate asthma are

generally well controlled with inhaled corticosteroids and long-acting beta agonists. However, a small percentage of the estimated 25 million asthma patients in the United States have severe asthma and are refractory to high-dose combination therapy. This severe population is commonly treated with oral corticosteroids, which are associated with a host of undesirable side effects and are often insufficient to control the disease.

XmAb14045 and XmAb13676:  Our initial two bispecific candidates are targeted toward oncology to treat cancer. Cancer is a broad group of diseases in which cells divide and grow in an uncontrolled fashion, forming malignancies that can invade other parts of the body.  Cancer is the second leading cause of death in the United States. The American Cancer Society estimates that in 2016 there will be approximately 1.7 million new cases of cancer and approximately 595,000 deaths from cancer. The National Institutes of Health estimates that based on growth and aging of the U.S. population, medical expenditures for cancer in the year 2020 are projected to reach at least $158 billion (in 2010 dollars). B-cell cancers include lymphomas such as NHL and leukemias such as CLL and ALL. Collectively, lymphomas and leukemias represent about three and five percent, respectively, of all cancers diagnosed in the United States. The National Cancer Institute estimates that over 20,000 new cases of AML and over 26,000 new cases of multiple myeloma were reported in the United States in 2015.

Intellectual Property

The foundation for our XmAb technology and our product candidates and partnering is the generation and protection of intellectual property for novel antibody therapeutics. We combine proprietary computational methods for amino acid sequence design with laboratory generation and testing of new antibody compositions. Our design and engineering team prospectively assesses, with patent counsel, the competitive landscape with the goal of building broad patent positions and avoiding third-party intellectual property.

As a pioneer in Fc domain engineering, we systematically scanned the structure of the Fc domain to discover Fc variants. We have filed patent applications relating to thousands of specific Fc domain variants with experimental data on specific improvements of immune function, pharmacokinetics, structural stability and novel structural constructs. We have filed additional patent applications derived from these applications as we discover new properties of the Fc variants and as new business opportunities arise. We continually seek to expand the intellectual property coverage of our technology and candidates, and invest in discovering new Fc domain technologies and antibody product candidates.

Our patent estate, on a worldwide basis, includes over 200 issued patents and pending patent applications which we own or for which we have a fully-paid exclusive license, with claims directed to XmAb Fc domains, all of our clinical and preclinical stage antibodies and our computational protein design methods, called the PDA, protein design platform. We also have a large number of issued patents and pending patent applications with claims directed specifically to our XmAb technology and candidates.  Our XmAb Fc domain, patents and patent applications, with claims directed to their incorporation into antibodies, Fc domain engineering and compositions of matter are expected to expire in the United States between 2023 and 2031. Our three lead product candidates are covered by issued U.S. composition of matter patents relating to both the XmAb Fc domains and the individual product candidates. The composition of matter patents relating to our lead product candidates are expected to expire in the United States between 2027 and 2030, two of which relate to XmAb5871 and two of which relate to XmAb7195. The composition of matter patents relating to our XmAb bispecific technology and patent candidates expire beginning in 2033 and 2034. 

In addition to patent protection, we rely on trade secret protection and know-how to expand our proprietary position around our technology and other discoveries and inventions that we consider important to our business. We seek to protect this intellectual property in part by entering into confidentiality agreements with our employees, consultants, scientific advisors, clinical investigators and other contractors and also by requiring our employees, commercial contractors and certain consultants and investigators, to enter into invention assignment agreements that grant us ownership of certain discoveries or inventions made by them.

Further, we seek trademark protection in the United States and in certain other jurisdictions where available and when we deem appropriate. We have obtained registrations for the Xencor trademark, as well as certain other trademarks, which we use in connection with our pharmaceutical research and development services and our clinical-stage products, including XmAb, PDA and Protein Design Automation. We currently have registrations for Xencor and PDA in the

United States, Australia, Canada, the European Community and Japan, for Protein Design Automation in the United States, Australia, Canada and the European Community, and for XmAb in the United States, Australia and the European Community.

Manufacturing

We are able to internally manufacture the quantities of our product candidates required for relatively short preclinical animal studies. We believe that this allows us to accelerate the drug development process by not having to rely on third parties for all of our manufacturing needs.  We have adopted a manufacturing strategy of contracting with third parties in accordance with cGMP for the manufacture of drug substance and product, including XmAb5871, XmAb7195 and our first two bispecific development candidates, XmAb14045 and XmAb13676. Additional contract manufacturers are used to fill, label, package and distribute investigational drug products. This allows us to maintain a more flexible infrastructure while focusing our expertise on developing our products. XmAb5871and XmAb7195 are produced by mammalian cell culture of a Chinese hamster ovary cell line that expresses the antibody, followed by multiple purification and filtration steps typical of those used for monoclonal antibodies. We do not have any long term manufacturing agreements in place and will ultimately depend on contract manufacturers for the manufacture of our products for commercial sale, as well as for process development.  We are currently in the process of developing subcutaneous formulations for XmAb5871 and XmAb7195 with third party contract manufacturers.

Development and Manufacturing and Cell Line Sale Agreements with Catalent

In September 2005, we entered into a development and manufacturing services agreement (the Catalent Manufacturing Agreement) with Catalent Pharma Solutions LLC (Catalent). Under the terms of the agreement, Catalent will, from time to time, provide development and manufacturing services for us. They are currently manufacturing drug substance for our XmAb5871 and XmAb7195 development programs.

We have also entered into separate cell line sale agreements (Cell Line Agreements) for the XmAb5871 and XmAb7195 cell lines. Catalent manufactured the cell lines for the XmAb5871 and XmAb7195 programs using their proprietary GPEx® technology. Under the Catalent Manufacturing Agreement, we have an unrestricted license to the GPEx cell lines provided that Catalent is manufacturing drug substance material from the cell line. The Cell Line Agreements allow us to transfer the manufacturing processes for either XmAb5871 or XmAb7195 to a third party manufacturer. 

Upon transfer of the XmAb5817 or XmAb7195 cell line to a third party manufacturer, we will be required to make payments to Catalent based upon the achievement of certain development and regulatory milestones and will also pay royalties based on a percentage of net sales for products that are derived from or utilize the GPEx Cell Line. The royalty percentages under each Cell Line Agreement is less than 1.0%.

We have the unilateral right to terminate the Catalent Agreement upon 30 days written notice to Catalent. Absent early termination, the agreement will remain in effect. If we terminate the agreement without cause or if Catalent terminates the agreement for our material breach of the agreement, our ownership rights in the cell line will automatically terminate, and title will revert to Catalent.

Boehringer Ingelheim International GmBH

In February 2012, we entered into a collaboration agreement with Boehringer Ingelheim International GmbH (BI) for the establishment of certain manufacturing processes and the production of our next generation monoclonal anti‑TNF antibody for use in our preclinical and Phase 1 clinical development. Under the terms of the agreement, we are required to use commercially reasonable efforts to complete Phase 1 clinical testing of the product and to find a licensing partner for the further development and commercialization of the antibody into a therapeutic product.

We will be required to pay for services performed and products provided by BI under the agreement pursuant to project plans entered into from time to time. In addition, we are required to reimburse BI for all out‑of‑pocket expenses, including the cost of raw materials, incurred in connection with the project plan. BI has agreed to delay all payments due

to them under the agreement, including an annual interest rate which is a low double digit percentage, until (A) in the case where we have entered into a license agreement with a third party, the later of (1) the effective date of such license agreement or (2) the earlier of (i) completion of the clinical summary report for a Phase 1 clinical trial of the product or (ii) February 10, 2017 or (B) in the case where we decide to continue to develop the product on our own, on or before five years from the earlier of (i) completion of the clinical summary report for a Phase 1 clinical trial of the product or (ii) February 10, 2017. Any payments due by us in the situation described in clause (A) of the preceding sentence will be made in installments each of which will be limited to a maximum percentage of any licensing revenue that we receive under the applicable third‑party license. We are not obligated to pay BI any or all of the amounts owed under the agreement, including interest payments if we: (a) are not able to further develop the product for technical or scientific reasons or (b) do not decide to proceed with the further development of the product without a business partner and are unable to enter into a partnership agreement within an agreed upon period of time after Phase 1 clinical development.

Absent early termination, the agreement will terminate upon completion of all projects set forth in the agreement. Either party may terminate the agreement upon 180 days prior written notice to the other party if such party will not be able to carry out the project contemplated by the agreement for scientific, technical or business reasons.

KBI Biopharma, Inc.

In July 2014, we entered into a master services agreement (KBI Agreement) with KBI Biopharma, Inc. (KBI). We have engaged KBI under the KBI Agreement for process development, clinical scale-up, analytical method development, formulation development and other services related to drug substance and drug product for our first two bispecific development candidates, XmAb14045 and XmAb13676,  in accordance with  cGMP regulations. For each bispecific program we have entered into a separate agreement with the terms and conditions of services and payment. The KBI Agreement is for a three year term but is automatically extended on an annual basis until the services are completed.  The KBI Agreement may be terminated by either party for a breach that is not remedied within thirty days after notice or sixty days after notice of the existence of an uncurable scientific or technical issue that renders KBI unable to render services under the KBI Agreement, by after sixty day notice, or in the event of a bankruptcy of a party.  For termination other than a material breach by KBI, we must pay for all services conducted prior to the termination and to wind down the activities.

Competition

We compete in an industry that is characterized by rapidly advancing technologies, intense competition and a strong emphasis on proprietary products. Our competitors include pharmaceutical companies, biotechnology companies, academic institutions and other research organizations. We compete with these parties for promising targets for antibody‑based therapeutics, new technology for optimizing antibodies and in recruiting highly qualified personnel. Many competitors and potential competitors have substantially greater scientific, research and product development capabilities as well as greater financial, marketing and sales and human resources than we do. In addition, many specialized biotechnology firms have formed collaborations with large, established companies to support the research, development and commercialization of products that may be competitive with ours. Accordingly, our competitors may be more successful than we may be in developing, commercializing and achieving widespread market acceptance. In addition, our competitors’ products may be more effective or more effectively marketed and sold than any treatment we or our development partners may commercialize and may render our product candidates obsolete or noncompetitive before we can recover the expenses related to developing and commercializing any of our product candidates.

Competition in autoimmune disease drug development is intense and includes multiple monoclonal antibodies, other biologics and small molecules approved for the treatment of autoimmune diseases, many of which are being developed or marketed by large multinational pharmaceutical companies. Benlysta is currently the only monoclonal antibody that we are aware of that is approved for the treatment of lupus, although we believe that Rituxan is prescribed, off label, for this indication. In addition, other pharmaceutical companies have monoclonal antibodies or other biologics in clinical development for the treatment of autoimmune diseases. There are currently no approved therapies for IgG4-related disease, a newly recognized disorder, and glucocorticoids are the current standard of care.

Many companies have approved therapies or are developing drugs for the treatment of asthma including multinational pharmaceutical companies. Monoclonal antibody drug development has primarily focused on allergic asthma. Xolair is currently the only monoclonal antibody that we are aware of that is approved for the treatment of severe asthma. In addition, we are aware that Novartis and Genentech each have an antibody targeting IgE in clinical development for asthma. Other monoclonal antibodies in development target cytokines such as IL‑13, IL‑4, IL‑5, IL‑9, GM‑CSF or their receptors. Although these drugs function differently from our products, if successfully developed, these drugs will compete in the asthma market. We are not aware of any companies developing drugs that target FcγRIIb for the treatment of asthma.

Competition in blood cancer drug development is intense, with more than 250 compounds in clinical trials by large multinational pharmaceutical companies and Rituxan is just one of many monoclonal antibodies approved for the treatment of NHL or other blood cancers. In addition, we are aware of a number of other companies with development stage programs that may compete with the drug candidates we and our licenses are developing in the future. We anticipate that we will face intense and increasing competition as new treatments enter the market and advanced technologies become available.

Regulatory Overview

Our business and operations are subject to a variety of U.S. federal, state and local and foreign supranational, national, provincial and municipal laws, regulations and trade practices. The FDA and comparable regulatory authorities in state and local jurisdictions and in other countries impose substantial and burdensome requirements upon companies involved in the clinical development, manufacture, marketing and distribution of drugs and biologics. These agencies and other federal, state and local entities regulate research and development activities and the testing, manufacture, quality control, safety, effectiveness, labeling, storage, recordkeeping, approval, advertising and promotion and export and import of our product candidates.

U.S. Government Regulation

U.S. Drug Development Process

In the United States, the FDA regulates drugs and biologic products under the Federal Food, Drug and Cosmetic Act (FDCA), its implementing regulations and other laws, including, in the case of biologics, the Public Health Service Act. Our antibody product candidates are subject to regulation by the FDA as a biologic. Biologics require the submission of a Biologics License Application (BLA) to the FDA and approval of the BLA by the FDA before marketing in the United States. The process of obtaining regulatory approvals for commercial sale and distribution and the subsequent compliance with applicable federal, state, local and foreign statutes and regulations require the expenditure of substantial time and financial resources. Failure to comply with the applicable requirements at any time during the product development process, approval process or after approval, may subject an applicant to administrative or judicial civil or criminal sanctions. These sanctions could include the FDA’s refusal to approve pending applications, license suspension or revocation, withdrawal of an approval, imposition of a clinical hold on clinical trials, warning letters, product recalls, product seizures, total or partial suspension of production or distribution, injunctions, fines, refusals of government contracts, restitution, disgorgement or civil and/or criminal penalties. The process required by the FDA before a biologic may be marketed in the United States generally involves the following:

Before testing any compounds with potential therapeutic value in humans, the product candidate enters the preclinical testing stage. Preclinical tests include laboratory evaluations of product chemistry, stability and formulation, as well as animal studies to assess the potential toxicity and activity of the product candidate. Clinical trials involve the administration of the product candidate to human patients under the supervision of qualified investigators, generally physicians not employed by or under the clinical trial sponsor’s control. Clinical trials are conducted under protocols detailing, among other things, the objectives of the clinical trial, dosing procedures, subject selection and exclusion criteria and the parameters to be used to monitor subject safety and effectiveness:

Concurrent with clinical trials, companies usually complete additional animal studies and must also develop additional information about the chemistry and physical characteristics of the biologic and finalize a process for manufacturing the product in commercial quantities in accordance with cGMP requirements.

U.S. Review and Approval Processes

The results of product development, preclinical studies and clinical trials, along with descriptions of the manufacturing process, analytical tests, proposed labeling and other relevant information are submitted to the FDA in the form of a BLA requesting approval to market the product for one or more specified indications.

If the FDA determines that the BLA is substantially complete it will accept the BLA for filing.  This process generally takes eight months to a year but in some cases may take much longer.

The FDA reviews the BLA to determine, among other things, whether the proposed product is safe and effective for its intended use, and whether the product is being manufactured in accordance with cGMP to assure and

preserve the product’s identity, strength, quality and purity and it may inspect the manufacturing facilities to assure cGMP compliance and clinical sites used during the clinical trials to assure cGMP compliance. During the approval process, the FDA also will determine whether a risk evaluation and mitigation strategy (REMS) is necessary to assure the safe use of the product. If the FDA concludes a REMS is needed, the sponsor of the BLA must submit a proposed REMS prior to approval. A REMS can substantially increase the costs of obtaining approval. In addition, under the Pediatric Research Equity Act, or PREA, a BLA or supplement to a BLA must contain data that are adequate to assess the safety and effectiveness of the product for the claimed indications in all relevant pediatric subpopulations, and to support dosing and administration for each pediatric subpopulation for which the product is safe and effective. The FDA may, on its own initiative or at the request of the applicant, grant deferrals for submission of some or all pediatric data until after approval of the product for use in adults, or full or partial waivers from the pediatric data requirements.

The FDA will issue a complete response letter describing deficiencies in the BLA and recommend actions if the agency decides not to approve the BLA. The applicant will have to address all of the deficiencies which could take substantial time to address.

If the product receives regulatory approval, the approval may be significantly limited to specific diseases and dosages or the indications for use may otherwise be limited, and may require that certain contraindications, warnings or precautions be included in the product labeling. In addition, the FDA may require post marketing studies, sometimes referred to as Phase 4 testing, which involves clinical trials designed to further assess drug safety and effectiveness and may require testing and surveillance programs to monitor the safety of approved products that have been commercialized.

Post‑Approval Requirements

Any biologic products for which we or our collaborators receive FDA approvals are subject to continuing regulation by the FDA, including, among other things, cGMP compliance for product manufacture, record‑keeping requirements, reporting of adverse experiences with the product, providing the FDA with updated safety and efficacy information, product sampling and distribution requirements, complying with certain electronic records and signature requirements and complying with FDA promotion and advertising requirements, which include, among others, restrictions on direct‑to‑consumer advertising, promoting biologics for uses or in patient populations that are not described in the product’s approved labeling (known as “off‑label use”), industry‑sponsored scientific and educational activities and promotional activities involving the internet. Failure to comply with these or other FDA requirements can subject a manufacturer to possible legal or regulatory action, such as product reclass, warning letters, suspension of manufacturing, seizure of product, injunctive action, mandated corrective advertising or communications with healthcare professionals, possible civil or criminal penalties or other negative consequences, including adverse publicity.

U.S. Patent Term Restoration and Marketing Exclusivity

Depending upon the timing, duration and specifics of the FDA approval of any of our biologic product candidates,  we may apply for limited patent term extension under the Drug Price Competition and Patent Term Restoration Act of 1984, commonly referred to as the Hatch-Waxman Amendments.  The Hatch‑Waxman Amendments permit a patent restoration term of up to five years for one patent per product as compensation for patent term lost during product development and the FDA regulatory review process of that product. The U.S. Patent and Trademark Office, in consultation with the FDA, reviews and approves the application for any patent term extension or restoration.

Market exclusivity provisions under the FDCA can also delay the submission or the approval of certain applications of other companies seeking to reference another company’s BLA. Specifically, the Biologics Price Competition and Innovation Act (BPCIA) established an abbreviated pathway for the approval of biosimilar and interchangeable biological products generally not earlier than 12 years after the original BLA approval, although it can be shortened to four years if the biosimilar contains certification of patent invalidity or non-infringement to one of the patents listed with the FDA by the innovator BLA holders. The abbreviated regulatory pathway establishes legal authority for the FDA to review and approve biosimilar biologics, including the possible designation of a biosimilar as “interchangeable” based on their similarity to existing brand product.

U.S. Foreign Corrupt Practices Act

The U.S. Foreign Corrupt Practices Act, to which we are subject, prohibits corporations and individuals from engaging in certain activities to obtain or retain business or to influence a person working in an official capacity. It is illegal to pay, offer to pay or authorize the payment of anything of value to any foreign government official, government staff member, political party or political candidate in an attempt to obtain or retain business or to otherwise influence a person working in an official capacity.

Pharmaceutical Coverage, Pricing and Reimbursement

The cost of pharmaceuticals continues to generate substantial governmental and third‑party payor interest. We expect that the pharmaceutical industry will experience pricing pressures due to the trend toward managed healthcare, the increasing influence of managed care organizations and additional legislative proposals. Significant uncertainty exists and will continue to exist as to the coverage and reimbursement status of any product candidate for which we obtain regulatory approval. In the United States and markets in other countries, sales of any product for which we receive regulatory approval for commercial sale will depend in part on the availability of coverage and adequate reimbursement from third party payors. Third-party payors include government payor programs at the federal and state levels, including Medicare and Medicaid, managed care providers, private health insurers and other organizations. Third‑party payors are increasingly challenging the price and examining the medical necessity and cost‑effectiveness of medical products and services, in addition to their safety and efficacy. Formulary placement by third-party payors is very competitive and can lead to lower prices and may effectively restrict patient access to our drugs. We may need to conduct expensive pharmacoeconomic studies in order to demonstrate the medical necessity and cost-effectiveness of our products, in addition to the costs required to obtain the FDA approvals. Our product candidates may not be considered medically necessary or cost-effective.

The U.S. government, state legislatures and foreign governments have shown significant interest in implementing cost containment programs to limit the growth of government-paid healthcare costs, including price controls, restrictions on reimbursement and requirements for substitution of generic products for branded prescription drugs. Different pricing and reimbursement schemes exist in other countries. In the European Community, governments influence the price of pharmaceutical products through their pricing and reimbursement rules and control of national healthcare systems that fund a large part of the cost of those products to consumers. The downward pressure on healthcare costs in general, and particularly prescription drugs, has become very intense. As a result, increasingly high barriers are being erected to the entry of new products. In addition, in some countries, cross‑border imports from low‑priced markets exert a commercial pressure on pricing within a country. There can be no assurance that any country that has price controls or reimbursement limitations for drug products will allow favorable reimbursement and pricing arrangements for any of our products.

Healthcare Reform

In the United States and foreign jurisdictions, there have been and will continue to be a number of legislative and regulatory proposals to change the healthcare system in ways that could affect our ability to sell our product candidates profitably, once they are approved for sale. Among policy makers and payors in the United States and elsewhere, there is significant interest in promoting changes in healthcare systems with the stated goals of containing healthcare costs, improving quality and/or expanding access. In the United States, the pharmaceutical industry has been a particular focus of these efforts and has been significantly affected by major legislative initiatives.

Additional new laws may result in additional reductions in Medicare and other healthcare funding, which could have a material adverse effect on our customers and accordingly, our financial operations.

Other Healthcare Laws and Compliance Requirements

In the United States, the research, manufacturing, distribution, sale and promotion of drug products and medical devices are potentially subject to regulation by various federal, state and local authorities in addition to the FDA, including CMS, other divisions of HHS (e.g., the Office of Inspector General), the U.S. Department of Justice, state Attorneys General, and other state and local government agencies. For example, sales, marketing and

scientific/educational grant programs must comply with fraud and abuse laws such as the federal Anti‑Kickback Statute, as amended, the federal False Claims Act, as amended, and similar state laws. Pricing and rebate programs must comply with the Medicaid Drug Rebate Program requirements of the Omnibus Budget Reconciliation Act of 1990, as amended, and the Veterans Health Care Act of 1992, as amended. If products are made available to authorized users of the Federal Supply Schedule of the General Services Administration, additional laws and requirements apply. All of these activities are also potentially subject to federal and state consumer protection and unfair competition laws.

The federal Anti‑Kickback Statute prohibits any person, including a prescription drug manufacturer (or a party acting on its behalf), from knowingly and willfully soliciting, receiving, offering or providing remuneration, directly or indirectly, to induce or reward either the referral of an individual, or the furnishing, recommending or arranging for a good or service, for which payment may be made under a federal healthcare program such as the Medicare and Medicaid programs. The federal False Claims Act imposes liability on any person or entity that, among other things, knowingly presents or causes to be presented, a false or fraudulent claim for payment by a federal healthcare program. The qui tam provisions of the False Claims Act allow a private individual to bring civil actions on behalf of the federal government alleging that the defendant has submitted a false claim to the federal government, and to share in any monetary recovery. In recent years, the number of suits brought by private individuals has increased dramatically. In addition, various states have enacted anti-kickback statues and false claims laws analogous to the False Claims Act. Also, the Health Insurance Portability and Accountability Act of 1996 (HIPAA) created several new federal crimes, including healthcare fraud, and false statements relating to the delivery of or payments for healthcare benefits, items or services.  HIPAA and its implementing regulations also established uniform federal standards for certain “covered entities” (healthcare providers, health plans and healthcare clearinghouses) governing the conduct of certain electronic healthcare transactions and protecting the security and privacy of protected health information.

Because of the breadth of these laws and the narrowness of available statutory and regulatory exemptions, it is possible that some of our business activities could be subject to challenge under one or more of such laws. If our operations are found to be in violation of any of the federal and state laws described above or any other governmental regulations that apply to us, we may be subject to penalties, including criminal and significant civil monetary penalties, damages, fines, imprisonment, exclusion from participation in government healthcare programs, injunctions, recall or seizure of products, total or partial suspension of production, denial or withdrawal of pre‑marketing product approvals, private “qui tam” actions brought by individual whistleblowers in the name of the government or refusal to allow us to enter into supply contracts, including government contracts, and the curtailment or restructuring of our operations, any of which could adversely affect our ability to operate our business and our results of operations.

Europe / Rest of World Government Regulation

In addition to regulations in the United States, we, and our collaborators, will be subject to a variety of regulations in other jurisdictions governing, among other things, clinical trials and any commercial sales, marketing and distribution of our products, similar or more stringent than the U.S. laws.

Whether or not we, or our collaborators, obtain FDA approval for a product, we must obtain the requisite approvals from regulatory authorities in foreign countries prior to the commencement of clinical trials or marketing of the product in those countries. The requirements and process governing the conduct of clinical trials, product licensing, pricing and reimbursement vary from country to country. In addition, we and our collaborators may be subject to foreign laws and regulations and other compliance requirements, including, without limitation, anti‑kickback laws, false claims laws and other fraud and abuse laws, as well as laws and regulations requiring transparency of pricing and marketing information and governing the privacy and security of health information, such as the European Union’s Directive 95/₄₆ on the Protection of Individuals with regard to the Processing of Personal Data.

If we, or our collaborators, fail to comply with applicable foreign regulatory requirements, we may be subject to, among other things, fines, suspension or withdrawal of regulatory approvals, product recalls, seizure of products, operating restrictions and criminal prosecution.

Employees

As of December 31, 2015, we had 53 employees, 52 of whom were full‑time,  20 of whom hold Ph.D. or M.D. degrees, 38 of whom were engaged in research and development activities and 15 of whom were engaged in business development, finance, information systems, facilities, human resources or administrative support. None of our employees are represented by any collective bargaining unit. We believe that we maintain good relations with our employees.

About Xencor

We were incorporated in California in August 1997 under the name Xencor. In September 2004, we reincorporated in the state of Delaware under the name Xencor, Inc. Our principal offices are located at 111 West Lemon Avenue, Monrovia, CA 91016, and our telephone number (626) 305‑5900. Our website address is www.xencor.com. Our website and the information contained on, or that can be accessed through, the website will not be deemed to be incorporated by reference in, and are not considered part of, this Annual Report on Form 10‑K. Our Annual Reports on Form 10‑K, Quarterly Reports on Form 10‑Q, Current Reports on Form 8‑K and amendments to reports filed or furnished pursuant to Section 13(a) and 15(d) of the Securities Exchange Act of 1934, as amended, are available free of charge of the Investor Relations portion of our web site at www.xencor.com as soon as reasonably practical after we electronically file such material with, or furnish it to, the Securities and Exchange Commission (SEC).

We have a single operating segment and substantially all of our operating assets are located in the United States. For information regarding our revenue and research and development expenses for the last three fiscal years, see Item 7, ‘Management’s Discussion and Analysis of Financial Conditions and Results of Operations.”

Unless the context requires otherwise references to “Xencor”, “we”, “us”, and “our” refer to Xencor, Inc.

Item 1A.  Risk Factors.

Except for the historical information contained herein or incorporated by reference, this Annual Report and the information incorporated by reference contains forward‑looking statements that involve risks and uncertainties. These statements include projections about our accounting and finances, plans and objectives for the future, future operating and economic performance and other statements regarding future performance. These statements are not guarantees of future performance or events. Our actual results may differ materially from those discussed here. Factors that could cause or contribute to differences in our actual results include those discussed in the following section, as well as those discussed in Part II, Item 7 entitled “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and elsewhere throughout this Annual Report and in any other documents incorporated by reference into this Annual Report. You should consider carefully the following risk factors, together with all of the other information included or incorporated in this Annual Report. Each of these risk factors, either alone or taken together, could adversely affect our business, operating results and financial condition, as well as adversely affect the value of an investment in our common stock. There may be additional risks that we do not presently know of or that we currently believe are immaterial which could also impair our business and financial position.

Risks Relating to Our Business and to the Discovery, Development and Regulatory Approval of Our Product Candidates

We have incurred significant losses since our inception and anticipate that we will continue to incur significant losses for the foreseeable future.

We are a clinical‑stage biopharmaceutical company. To date, we have financed our operations primarily through equity and debt financings and our research and licensing agreements and have incurred significant operating losses since our inception in 1997. Our net loss for the years ended December 31, 2015, 2014 and 2013 respectively, was $17.6, 16.4 million and $60.3 million (including a $48.6 million loss on settlement of convertible notes). As of December 31, 2015 we had an accumulated deficit of $261.6 million. Such losses are expected to increase in the future as we execute our plan to continue our discovery, research and development activities, including the ongoing and

planned clinical development of our antibody product candidates, and incur the additional costs of operating as a public company. We are unable to predict the extent of any future losses or when we will become profitable, if ever. Even if we do achieve profitability, we may not be able to sustain or increase profitability on an ongoing basis which would adversely affect our business, prospects, financial condition and results of operations.

Biopharmaceutical product development is a highly speculative undertaking and involves a substantial degree of uncertainty. We have never generated any revenue from product sales and may never be profitable.

We have devoted substantially all of our financial resources and efforts to developing our proprietary XmAb technology platform, identifying potential product candidates and conducting preclinical studies and clinical trials. We and our partners are still in the early stages of developing our product candidates, and we have not completed development of any products. Our revenue to date has been primarily revenue from the license of our proprietary XmAb technology platform for the development of product candidates by others or revenue from our partners. Our ability to generate revenue and achieve profitability depends in large part on our ability, alone or with partners, to achieve milestones and to successfully complete the development of, obtain the necessary regulatory approvals for, and commercialize, product candidates. We do not anticipate generating revenues from sales of products for the foreseeable future. Our ability to generate future revenues from product sales depends heavily on our and our partners’ success in:

Because of the numerous risks and uncertainties associated with biologic product development, we are unable to predict the timing or amount of increased expenses and when we will be able to achieve or maintain profitability, if ever. In addition, our expenses could increase beyond expectations if we are required by the U.S. Food and Drug Administration (FDA), or foreign regulatory agencies, to perform studies and trials in addition to those that we currently anticipate, or if there are any delays in our or our partners completing clinical trials or the development of any of our product candidates. If one or more of the product candidates that we independently develop is approved for commercial sale, we anticipate incurring significant costs associated with commercializing such product candidates. Even if we or our partners are able to generate revenues from the sale of any approved products, we may not become profitable and may need to obtain additional funding to continue operations, which may not be available to us on favorable terms, if at all. Even if we do achieve profitability, we may not be able to sustain or increase profitability on a quarterly or annual

basis. Our failure to become and remain profitable would depress the value of our company and could impair our ability to raise capital, expand our business, maintain our research and development efforts, diversify our product offerings or even continue our operations. A decline in the value of our company could also cause you to lose all or part of your investment.

We will require additional financing and may be unable to raise sufficient capital, which could lead us to delay, reduce or abandon research and development programs or commercialization.

As of December 31, 2015, we had $193.3 million in cash, cash equivalents and marketable securities. We expect our expenses to increase in connection with our ongoing development activities, including additional clinical trials of XmAb5871 and XmAb7195, and, continued development of our bispecific drug candidates including our initial development candidates, XmAb14045 and XmAb13676, and other research activities. Identifying potential product candidates and conducting preclinical testing and clinical trials are time‑consuming, expensive and uncertain processes that take years to complete, and we or our partners may never generate the necessary data or results required to obtain regulatory approval and achieve product sales. In addition, our product candidates, if approved, may not achieve commercial success.

Our commercial revenues, if any, will be derived from sales of products that we do not expect to be commercially available for many years, if at all. If we obtain regulatory approval for any of our product candidates, we expect to incur significant commercialization expenses related to product manufacturing, marketing, sales and distribution. Accordingly, we will need to obtain substantial additional funding in connection with our continuing operations. If we are unable to raise capital when needed or on attractive terms, we could be forced to delay, reduce or eliminate our research and development programs or any future commercialization efforts.

We believe our existing cash, together with interest thereon, will be sufficient to fund our operations through the end of 2019. However, changing circumstances or inaccurate estimates by us may cause us to use capital significantly faster than we currently anticipate, and we may need to spend more money than currently expected because of circumstances beyond our control. For example, our planned clinical trials for XmAb5871, XmAb7195,XmAb14045, XmAb13676 or clinical trials for other drug candidates may encounter technical, enrollment or other issues that could cause our development costs to increase more than we expect. We do not have sufficient cash to complete the clinical development of any of our product candidates and will require additional funding in order to complete the development activities required for regulatory approval of XmAb5871,  XmAb7195, XmAb14045, or XmAb13676 or any other future product candidates that we develop independently. Because successful development of our product candidates is uncertain, we are unable to estimate the actual funds we will require to complete research and development and commercialize our product candidates. Adequate additional financing may not be available to us on acceptable terms, or at all. In addition, we may seek additional capital due to favorable market conditions or strategic considerations; even if we believe we have sufficient funds for our current or future operating plans. If we are unable to raise capital when needed or on attractive terms, we could be forced to delay, reduce or eliminate our research and development programs or any future commercialization efforts.

The development and commercialization of biologic products is subject to extensive regulation, and we may not obtain regulatory approvals for any of our product candidates.

The clinical development, manufacturing, labeling, packaging, storage, recordkeeping, advertising, promotion, export, import, marketing and distribution and other possible activities relating to XmAb5871, XmAb7195, XmAb14045 and XmAb13676, our current lead antibody product candidates, as well as any other antibody product candidate that we may develop in the future, are subject to extensive regulation in the United States as biologics. Biologics require the submission of a Biologics License Application (BLA) to the FDA and we are not permitted to market any product candidate in the United States until we obtain approval from the FDA of a BLA for that product. A BLA must be supported by extensive clinical and preclinical data, as well as extensive information regarding chemistry, manufacturing and controls (CMC) sufficient to demonstrate the safety, purity, potency and effectiveness of the applicable product candidate to the satisfaction of the FDA.

Regulatory approval of a BLA is not guaranteed, and the approval process is an expensive and uncertain process that may take several years. The FDA and foreign regulatory entities also have substantial discretion in the approval process. The number and types of preclinical studies and clinical trials that will be required for BLA approval varies depending on the product candidate, the disease or the condition that the product candidate is designed to target and the regulations applicable to any particular product candidate. Despite the time and expense associated with preclinical studies and clinical trials, failure can occur at any stage, and we could encounter problems that require us to repeat or perform additional preclinical studies or clinical trials or generate additional CMC data. The FDA and similar foreign authorities could delay, limit or deny approval of a product candidate for many reasons, including because they:

Generally, public concern regarding the safety of drug and biologic products could delay or limit our ability to obtain regulatory approval, result in the inclusion of unfavorable information in our labeling, or require us to undertake other activities that may entail additional costs.

We have not submitted an application for approval or obtained FDA approval for any product. This lack of experience may impede our ability to obtain FDA approval in a timely manner, if at all, for our product candidates.

To market any biologics outside of the United States, we and current or future collaborators must comply with numerous and varying regulatory and compliance related requirements of other countries. Approval procedures vary among countries and can involve additional product testing and additional administrative review periods, including obtaining reimbursement and pricing approval in select markets. The time required to obtain approval in other countries might differ from that required to obtain FDA approval. The regulatory approval process in other countries may include all of the risks associated with FDA approval as well as additional, presently unanticipated, risks. Regulatory approval in one country does not ensure regulatory approval in another, but a failure or delay in obtaining regulatory approval in one country may negatively impact the regulatory process in others, including the risk that our product candidates may not be approved for all indications requested and that such approval may be subject to limitations on the indicated uses for which the drug may be marketed. Certain countries have a very difficult reimbursement environment and we may not obtain reimbursement or pricing approval, if required, in all countries where we expect to market a product, or we may obtain reimbursement approval at a level that would make marketing a product in certain countries not viable.

If we experience delays in obtaining approval or if we fail to obtain approval of our product candidates, the commercial prospects for our product candidates may be harmed and our ability to generate revenues will be materially impaired which would adversely affect our business, prospects, financial condition and results of operations.

Even if we receive regulatory approval for any of our product candidates, we will be subject to ongoing regulatory obligations and continued regulatory review, which may result in significant additional expense. Additionally, our product candidates, if approved, could be subject to labeling and other restrictions and market withdrawal and we may be subject to penalties if we fail to comply with regulatory requirements or experience unanticipated problems with our products.

Any regulatory approvals that we or our partners receive for our product candidates may also be subject to limitations on the approved indicated uses for which the product may be marketed or to the conditions of approval, or contain requirements for potentially costly post‑marketing testing, including Phase 4 clinical trials, and surveillance to monitor the safety and efficacy of the product candidate. In addition, if the FDA or a comparable foreign regulatory authority approves any of our product candidates, the manufacturing processes, labeling, packaging, distribution, adverse event reporting, storage, advertising, promotion, import, export and recordkeeping for the product will be subject to extensive and ongoing regulatory requirements. These requirements include submissions of safety and other post‑marketing information and reports, registration, as well as continued compliance with current good manufacturing practices (cGMPs), and current good clinical practices (cGCPs), for any clinical trials that we conduct post‑approval. Later discovery of previously unknown problems with a product, including adverse events of unanticipated severity or frequency, undesirable side effects caused by the product, problems encountered by our third‑party manufacturers or manufacturing processes, or failure to comply with regulatory requirements, either before or after product approval, may result in, among other things:

Additionally if any of our product candidates receives marketing approval, the FDA could require us to adopt a Risk Evaluation and Mitigation Strategy (REMS) to ensure that the benefits of the therapy outweigh its risks, which may include, among other things, a medication guide outlining the risks for distribution to patients and a communication plan to health care practitioners.

Any of these events could prevent us from achieving or maintaining market acceptance of the product or the particular product candidate at issue and could significantly harm our business, prospects, financial condition and results of operations.

The FDA’s policies may change and additional government regulations may be enacted that could prevent, limit or delay regulatory approval of our product candidates. We cannot predict the likelihood, nature or extent of government regulation that may arise from future legislation or administrative action, either in the United States or abroad. If we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or

policies, or if we are not able to maintain regulatory compliance, we may lose any marketing approval that we may have obtained and we may not achieve or sustain profitability, which would adversely affect our business, prospects, financial condition and results of operations.

If we experience delays or difficulties in the enrollment of patients in clinical trials, our receipt of necessary regulatory approvals could be delayed or prevented.

We may not be able to initiate or continue clinical trials for our product candidates if we are unable to locate and enroll a sufficient number of eligible patients to participate in these trials as required by the FDA or similar regulatory authorities outside the United States. In addition, some of our competitors have ongoing clinical trials for product candidates that treat the same indications as our product candidates, and patients who would otherwise be eligible for our clinical trials may instead enroll in clinical trials of our competitors’ product candidates.

Patient enrollment is affected by other factors including:

Our inability to enroll a sufficient number of patients for any of our clinical trials could result in significant delays and could require us to abandon one or more clinical trials altogether. Enrollment delays in our clinical trials may result in increased development costs for our product candidates and in delays to commercially launching our product candidates, if approved, which would cause the value of our company to decline and limit our ability to obtain additional financing.

The manufacture of biopharmaceutical products, including XmAb‑engineered antibodies, is complex and manufacturers often encounter difficulties in production. If we or any of our third‑party manufacturers encounter any loss of our master cell banks or if any of our third‑party manufacturers encounter other difficulties, or otherwise fail to comply with their contractual obligations, our ability to provide product candidates for clinical trials or our products to patients, once approved, the development or commercialization of our product candidates could be delayed or stopped.

The manufacture of biopharmaceutical products is complex and requires significant expertise and capital investment, including the development of advanced manufacturing techniques and process controls. We and our contract manufacturers must comply with cGMP regulations and guidelines. Manufacturers of biopharmaceutical products often encounter difficulties in production, particularly in scaling up and validating initial production and contamination. These problems include difficulties with production costs and yields, quality control, including stability of the product, quality assurance testing, operator error, shortages of qualified personnel, as well as compliance with strictly enforced federal, state and foreign regulations. Furthermore, if microbial, viral or other contaminations are discovered in our products or in the manufacturing facilities in which our products are made, such manufacturing facilities may need to be closed for an extended period of time to investigate and remedy the contamination.

All of our XmAb engineered antibodies are manufactured by starting with cells which are stored in a cell bank. We have one master cell bank for each antibody manufactured in accordance with cGMP and multiple working cell banks and believe we would have adequate backup should any cell bank be lost in a catastrophic event. However, it is possible that we could lose multiple cell banks and have our manufacturing severely impacted by the need to replace the cell banks.

We cannot assure you that any stability or other issues relating to the manufacture of any of our product candidates or products will not occur in the future. Additionally, our manufacturer may experience manufacturing difficulties due to resource constraints or as a result of labor disputes or unstable political environments. If our manufacturers were to encounter any of these difficulties, or otherwise fail to comply with their contractual obligations, our ability to provide any product candidates to patients in clinical trials and products to patients, once approved, would be jeopardized. Any delay or interruption in the supply of clinical trial supplies could delay the completion of clinical trials, increase the costs associated with maintaining clinical trial programs and, depending upon the period of delay, require us to commence new clinical trials at additional expense or terminate clinical trials completely. Any adverse developments affecting clinical or commercial manufacturing of our product candidates or products may result in shipment delays, inventory shortages, lot failures, product withdrawals or recalls, or other interruptions in the supply of our product candidates or products. We may also have to take inventory write‑offs and incur other charges and expenses for product candidates or products that fail to meet specifications, undertake costly remediation efforts or seek more costly manufacturing alternatives. Accordingly, failures or difficulties faced at any level of our supply chain could materially adversely affect our business and delay or impede the development and commercialization of any of our product candidates or products and could have a material adverse effect on our business, prospects, financial condition and results of operations.

Adverse side effects or other safety risks associated with our product candidates could delay or preclude approval, cause us to suspend or discontinue clinical trials, abandon product candidates, limit the commercial profile of an approved label, or result in significant negative consequences following marketing approval, if any.

Undesirable side effects caused by our product candidates could result in the delay, suspension or termination of clinical trials by us, our collaborators, the FDA or other regulatory authorities for a number of reasons. If we elect or are required to delay, suspend or terminate any clinical trial of any product candidates that we develop, the commercial prospects of such product candidates will be harmed and our ability to generate product revenues from any of these product candidates will be delayed or eliminated. Serious adverse events observed in clinical trials could hinder or prevent market acceptance of the product candidate at issue. Any of these occurrences may harm our business, prospects, financial condition and results of operations significantly.

In our Phase 1b/2a clinical trial of XmAb5871, for example, some subjects reported mild to moderate gastrointestinal toxicities (nausea, vomiting and diarrhea). Other treatment related adverse events experienced in more than two XmAb5871-treated patients were pyrexia (fever) and headache. Treatment related serious adverse events occurred in two patients that received XmAb5871: infusion related reaction and venous thrombosis. Further, interim analysis in our Phase 1a clinical trial of XmAb7195 resulted in subjects having urticaria and dose limiting thrombocytopenia. If these or other side effects cause excessive discomfort, safety risks or reduction in acceptable dosage, then the development and commercialization of XmAb5871 or XmAb7195 could suffer significant negative consequences. We cannot predict if additional types of adverse events or more serious adverse events will be observed in future clinical trials of XmAb5871, XmAb7195 or any future product candidate.

In addition, we observed detectable levels of immunogenicity, or the creation by the immune system of anti‑XmAb5871 antibodies, in 44% of subjects receiving XmAb5871 in the Phase 1a clinical trial. While a common occurrence for antibody therapies, immunogenicity to XmAb5871 or any of our other product candidates could neutralize the therapeutic effects of XmAb5871 or such other candidates and/or alter their pharmacokinetics, which could have a material adverse effect on the effectiveness of our product candidates and on our ability to commercialize them.

We may not be successful in our efforts to use and expand our XmAb technology platform to build a pipeline of product candidates and develop marketable products.

We are using our proprietary XmAb technology platform to develop engineered antibodies, with an initial focus on four properties: immune inhibition, cytotoxicity, extended half‑life and most recently, heterodimeric Fc domains enabling molecules with dual target binding. This platform has led to our lead product candidates, XmAb5871 and XmAb7195 and our initial bispecific development candidates,  XmAb14045 and XmAb13676, as well as the other programs that utilize our technology and that are being developed by our partners and licensees. While we believe our preclinical and clinical data to date, together with our established partnerships, has validated our platform to a degree, we are at a very early stage of development and our platform has not yet, and may never lead to, approved or marketable therapeutic antibody products. Even if we are successful in continuing to build our pipeline, the potential product candidates that we identify may not be suitable for clinical development, including as a result of their harmful side effects, limited efficacy or other characteristics that indicate that they are unlikely to be products that will receive marketing approval and achieve market acceptance. If we do not successfully develop and commercialize product candidates based upon our technological approach, we may not be able to obtain product or partnership revenues in future periods, which would adversely affect our business, prospects, financial condition and results of operations.

We face significant competition from other biotechnology and pharmaceutical companies and our operating results will suffer if we fail to compete effectively.

The biotechnology and pharmaceutical industries are intensely competitive. We have competitors both in the United States and internationally, including major multinational pharmaceutical companies, biotechnology companies, universities and other research institutions. Many of our competitors have substantially greater financial, technical and other resources, such as larger research and development staff and experienced marketing and manufacturing organizations and well‑established sales forces. Competition may increase further as a result of advances in the commercial applicability of technologies and greater availability of capital for investment in these industries. Our competitors may succeed in developing, acquiring or licensing on an exclusive basis, drug products that are more effective or less costly than any product candidate that we are currently developing or that we may develop.

We face intense competition in autoimmune disease drug development from multiple monoclonal antibodies, other biologics and small molecules approved for the treatment of autoimmune diseases many of which are being developed or marketed by large multinational pharmaceutical companies. GlaxoSmithKline’s Benlysta (belimumab) is currently the only monoclonal antibody that we are aware of that is approved for the treatment of lupus although we believe that Biogen Idec/Genentech’s Rituxan (rituximab) is prescribed, off label, for this indication. In addition, these and other pharmaceutical companies have monoclonal antibodies or other biologics in clinical development for the treatment of autoimmune diseases.

Many companies have approved therapies or are developing drugs for the treatment of asthma including multinational pharmaceutical companies such as GlaxoSmithKline, Roche/Genentech, Novartis AG and AstraZeneca plc. Xolair is currently the only monoclonal antibody that we are aware of that is approved for the treatment of severe asthma.

Competition in blood cancer drug development is intense, with more than 250 compounds in clinical trials by large multinational pharmaceutical companies and Rituxan is just one of many monoclonal antibodies approved for the treatment of non‑Hodgkin lymphomas or other blood cancers. Both Roche and Regeneron Pharmaceuticals have bispecific CD20 drug candidates in Phase 1 of development and there are many other companies developing their own bispecific platform technologies and drug candidates. CSL-Janssen has a CD123 that is currently in Phase 2.

Our ability to compete successfully will depend largely on our ability to leverage our experience in drug discovery and development to:

The availability and price of our competitors’ products could limit the demand, and the price we are able to charge, for any of our product candidates, if approved. We will not achieve our business plan if acceptance is inhibited by price competition or the reluctance of physicians to switch from existing drug products to our products, or if physicians switch to other new drug products or choose to reserve our products for use in limited circumstances.

Established biopharmaceutical companies may invest heavily to accelerate discovery and development of products that could make our product candidates less competitive. In addition, any new product that competes with an approved product must demonstrate compelling advantages in efficacy, convenience, tolerability and safety in order to overcome price competition and to be commercially successful. Accordingly, our competitors may succeed in obtaining patent protection, receiving FDA approval or discovering, developing and commercializing medicines before we do, which would have a material adverse impact on our business. We will not be able to successfully commercialize our product candidates without establishing sales and marketing capabilities internally or through collaborators.

Risks Relating to Our Dependence on Third Parties

Our existing partnerships are important to our business, and future partnerships may also be important to us. If we are unable to maintain any of these partnerships, or if these partnerships are not successful, our business could be adversely affected.

Because developing biologics products, conducting clinical trials, obtaining regulatory approval, establishing manufacturing capabilities and marketing approved products are expensive, we have entered into partnerships, and may seek to enter into additional partnerships, with companies that have more resources and experience than us, and we may become dependent upon the establishment and successful implementation of partnership agreements.

Our partnership and license agreements include those we have announced with Amgen, MorphoSys, Novo Nordisk, CSL and others. These partnerships and license agreements also have provided us with important funding for our development programs, and we expect to receive additional funding under these partnerships in the future. Our existing partnerships, and any future partnerships we enter into, may pose a number of risks, including the following:

If our partnerships and license agreements do not result in the successful development and commercialization of products or if one of our collaborators terminates its agreement with us, we may not receive any future research and development funding or milestone or royalty payments under the arrangement. If we do not receive the funding we expect under these arrangements, our continued development of our product candidates could be delayed and we may need additional resources to develop additional product candidates. All of the risks described in these risk factors relating to product development, regulatory approval and commercialization described in this Annual Report also apply to the activities of our collaborators and there can be no assurance that our partnerships and license agreements will produce positive results or successful products on a timely basis or at all.

Our partnership agreements generally grant our collaborators exclusive rights under certain of our intellectual property, and may therefore preclude us from entering into partnerships with others relating to the same or similar compounds, indications or diseases. In addition, partnership agreements may place restrictions or additional obligations on our ability to license additional compounds in different indications, diseases or geographical locations. If we fail to comply with or breach any provision of a partnership agreement, a collaborator may have the right to terminate, in whole or in part, such agreement or to seek damages. Many of our collaborators also have the right to terminate the partnership agreement for convenience. If a partnership agreement is terminated, in whole or in part, we may be unable to continue the development and commercialization of the applicable product candidates, and even if we are able to do so, such efforts may be delayed and result in additional costs.

There is no assurance that a collaborator who is acquired by a third party would not attempt to change certain contract provisions that could negatively affect our partnership. The acquiring company may also not accept the terms or assignment of our contracts and may seek to terminate the agreements. Any one of our partners could breach covenants, restrictions and/or sub‑license agreement provisions leading us into disputes and potential breaches of our agreements with other partners.

We may in the future determine to partner with additional pharmaceutical and biotechnology companies for development and potential commercialization of therapeutic products. We face significant competition in seeking appropriate collaborators. Our ability to reach a definitive agreement for a partnership will depend, among other things, upon our assessment of the collaborator’s resources and expertise, the terms and conditions of the proposed partnership and the proposed collaborator’s evaluation of a number of factors. If we elect to fund and undertake development or commercialization activities on our own, we may need to obtain additional expertise and additional capital, which may not be available to us on acceptable terms or at all. If we fail to enter into partnerships and do not have sufficient funds or expertise to undertake the necessary development and commercialization activities, we may not be able to further develop our product candidates or bring them to market or continue to develop our product platform and our business, prospects, financial condition and results of operations may be materially and adversely affected.

We rely upon third‑party contractors and service providers for the execution of most aspects of our development programs. Failure of these collaborators to provide services of a suitable quality and within acceptable timeframes may cause the delay or failure of our development programs.

We outsource certain functions, tests and services to contract research organizations (CROs), medical institutions and collaborators as well as outsourcing manufacturing to collaborators and/or contract manufacturers, and we rely on third parties for quality assurance, clinical monitoring, clinical data management and regulatory expertise. We also have engaged, and may in the future engage, a CRO to run all aspects of a clinical trial on our behalf. There is no assurance that such individuals or organizations will be able to provide the functions, tests, biologic supply or services as agreed upon or in a quality fashion and we could suffer significant delays in the development of our products or processes.

In some cases there may be only one or few providers of such services, including clinical data management or manufacturing services. In addition, the cost of such services could be significantly increased over time. We rely on third parties and collaborators as mentioned above to enroll qualified patients and conduct, supervise and monitor our clinical trials. Our reliance on these third parties and collaborators for clinical development activities reduces our control over these activities. Our reliance on these parties, however, does not relieve us of our regulatory responsibilities, including ensuring that our clinical trials are conducted in accordance with GCP regulations and the investigational plan and protocols contained in the regulatory agency applications. In addition, these third parties may not complete activities on schedule or may not manufacture under GMP conditions. Preclinical or clinical studies may not be performed or completed in accordance with Good Laboratory Practices (GLP) regulatory requirements or our trial design. If these third parties or collaborators do not successfully carry out their contractual duties or meet expected deadlines, obtaining regulatory approval for manufacturing and commercialization of our product candidates may be delayed or prevented. We rely substantially on third‑party data managers for our clinical trial data. There is no assurance that these third parties will not make errors in the design, management or retention of our data or data systems. There is no assurance these third parties will pass FDA or regulatory audits, which could delay or prohibit regulatory approval.

We rely on third parties to manufacture supplies of our preclinical and clinical product candidates. The development of such candidates could be stopped or delayed if any such third party fails to provide us with sufficient quantities of product or fails to do so at acceptable quality levels or prices or fails to maintain or achieve satisfactory regulatory compliance.

We do not currently have nor do we plan to acquire the infrastructure or capability internally to manufacture our clinical drug supplies for use in the conduct of our clinical trials, and we lack the resources and the capability to manufacture any clinical candidates on a clinical scale. Instead, we rely on our third‑party manufacturing partners, Catalent for the production of XmAb5871 and XmAb7195 and third parties for fill and testing services. We rely on KBI for the production of our bispecific development candidates, XmAb14045and XmAb13676.  Any of our contract manufacturers may not perform as agreed, may be unable to comply with cGMP requirements and with FDA, state and foreign regulatory requirements or may terminate their respective agreements with us.

In addition, manufacturers are subject to ongoing periodic unannounced inspection by the FDA and other governmental authorities to ensure strict compliance with government regulations. We do not control the manufacturing processes of either Catalent or KBI and are currently completely dependent on each of Catalent and KBI for the

production of XmAb5871, XmAb7195, XmAb14045 and XmAb13676 in accordance with cGMP, which include, among other things, quality control, quality assurance and the maintenance of records and documentation. If we were to experience an unexpected loss of supply, we could experience delays in our planned clinical trials, as Catalent or KBI would need to manufacture additional clinical drug supply and would need sufficient lead time to schedule a manufacturing slot. While there are other potential suppliers of clinical supplies of our biologics, the long transition periods necessary to switch manufacturers for any of XmAb5871, XmAb7195, XmAb14045 or XmAb13676 would significantly delay our clinical trials and the commercialization of such products, if approved.

We intend to rely on third parties to manufacture commercial supplies of our product candidate. If we are unable to enter into commercial supply agreements with third‑party suppliers or if any such third‑party supplier fails to provide us with sufficient quantities or fails to comply with regulatory requirements, commercialization of such products could be delayed or stopped.

We do not currently have nor do we plan to acquire the infrastructure or capability internally to manufacture our products on a commercial scale. Although we have entered into agreements for the manufacture of clinical supplies of XmAb5871, XmAb7195, XmAb14045 and XmAb13676, we have not entered into a commercial supply agreement with either Catalent or KBI and neither has demonstrated that it will be capable of manufacturing XmAb5871, XmAb7195, XmAb14045 or XmAb13676 on a large commercial scale. We expect to move manufacturing services to another contract manufacturing organization to support late‑stage clinical trials for XmAb5871 as well as commercial supplies. We might be unable to identify manufacturers for late stage clinical trials or commercial supply on acceptable terms or at all. A change to the manufacturing process for XmAb5871 or any of our product candidates would cause us to incur significant costs and to devote significant efforts to implement such a change. Additionally, the late‑stage clinical development and commercialization of XmAb5871 or other product candidates by us or our collaborators may be delayed as a result, which would materially and adversely affect our business.

If our third‑party manufacturers cannot successfully manufacture material that conforms to our specifications and the applicable regulatory authorities’ strict regulatory requirements, or pass regulatory inspection, they will not be able to secure or maintain regulatory approval for the manufacturing facilities. In addition, we have no control over the ability of any third‑party manufacturer to maintain adequate quality control, quality assurance and qualified personnel. The facilities used by our third‑party manufacturers to manufacture XmAb5871, XmAb7195, XmAb14045, XmAb13676 and any other potential product candidates that we may develop in the future must be approved by the applicable regulatory authorities, including the FDA, pursuant to inspections that will be conducted after we submit our BLA to the FDA. In addition, manufacturers are subject to ongoing periodic unannounced inspection by the FDA and other governmental authorities to ensure strict compliance with government regulations. If the FDA or any other applicable regulatory authorities do not approve these facilities for the manufacture of our products or if they withdraw any such approval in the future, or if our suppliers or third‑party manufacturer decide they no longer want to supply our biologics or manufacture our products, we may need to find alternative manufacturing facilities, which would significantly impact our ability to market our products and our business, prospects, financial condition and results of operations may be materially and adversely affected.

Risks Relating to Our Intellectual Property

If we are unable to obtain, maintain and enforce intellectual property protection covering our products, others may be able to make, use or sell products substantially the same as ours, which could adversely affect our ability to compete in the market.

Our commercial success depends, in part, on our ability to obtain, maintain and enforce patents, trade secrets, trademarks and other intellectual property rights and to operate without having third parties infringe, misappropriate or circumvent the rights that we own or license. If we are unable to obtain, maintain and enforce intellectual property protection covering our products, others may be able to make, use or sell products that are substantially the same as ours without incurring the sizeable development and licensing costs that we have incurred, which would adversely affect our ability to compete in the market. As of December 31, 2015, we held over 200 of issued patents and pending patent applications. We file patent applications in the United States, Canada, Japan, Europe and other major markets either directly or via the Patent Cooperation Treaty. Our ability to stop third parties from making, using, selling, offering to sell

or importing our product candidates is dependent upon the extent to which we have rights under valid and enforceable patents or trade secrets that cover these activities. However, the patent positions of biopharmaceutical companies, including ours, can be highly uncertain and involve complex legal and factual questions for which important legal principles remain unresolved. No consistent policy regarding the breadth of claims allowed in patents in these fields has emerged to date in the United States. The U.S. patent laws have recently changed, there have been changes regarding how patent laws are interpreted, and the U.S. Patent and Trademark Office (the PTO) has also implemented changes to the patent system. Some of these changes are currently being litigated, and we cannot accurately determine the outcome of any such proceedings or predict future changes in the interpretation of patent laws or changes to patent laws which might be enacted into law. Those changes may materially affect our patents, our ability to obtain patents or the patents and applications of our collaborators and licensors. The patent situation in the biopharmaceutical industry outside the United States is even more uncertain. Therefore, there is no assurance that our pending patent applications will result in the issuance of patents or that we will develop additional proprietary products which are patentable. Moreover, patents issued or to be issued to us may not provide us with any competitive advantage. Our patent position is subject to numerous additional risks, including the following:

Any of these factors could hurt our ability to gain full patent protection for our products. Registered trademarks and trademark applications in the United States and other countries are subject to similar risks as described above for patents and patent applications, in addition to the risks described below.

Many of our product development partnership agreements are complex and may call for licensing or cross‑licensing of potentially blocking patents, know‑how or intellectual property. Due to the potential overlap of data, know‑how and intellectual property rights there can be no assurance that one of our collaborators will not dispute our right to use, license or distribute data, know‑how or other intellectual property rights, and this may potentially lead to disputes, liability or termination of a program. There are no assurances that our actions or the actions of our collaborators would not lead to disputes or cause us to default with other collaborators. For example, we may become involved in disputes with our collaborators relating to the ownership of intellectual property developed in the course of the partnership. We also cannot be certain that a collaborator will not challenge the validity or enforceability of the patents we license.

We cannot be certain that any country’s patent and/or trademark office will not implement new rules which could seriously affect how we draft, file, prosecute and/or maintain patents, trademarks and patent and trademark applications. We cannot be certain that increasing costs for drafting, filing, prosecuting and maintaining patents, trademarks and patent and trademark applications will not restrict our ability to file for patent protection. For example, we may elect not to seek patent protection in certain jurisdictions or for certain inventions in order to save costs. We may be forced to abandon or return the rights to specific patents due to a lack of financial resources.

We currently rely, and may in the future rely, on certain intellectual property rights licensed from third parties to protect our technology. In particular, we have licensed and sublicensed certain intellectual property relating to our Xtend technology from a third party. Under our license, we have no right to control patent prosecution of this intellectual property or to enforce the patents, and as such the licensed rights may not be adequately maintained by the licensors. The termination of this or other licenses could also prevent us from commercializing product candidates covered by the licensed intellectual property.

Furthermore, the research resulting in the in‑licensed patents was developed in the course of research funded by the U.S. government. As a result, the U.S. government may have certain rights (“march‑in rights”) to intellectual property embodied in our Xtend products. Government rights in certain inventions developed under a government‑funded program include a non‑exclusive, non‑transferable, irrevocable worldwide license to use inventions for any governmental purpose. Circumstances that trigger march‑in rights include, for example, failure to take, within a reasonable time, effective steps to achieve practical application of the invention in a field of use, failure to satisfy the health and safety needs of the public and failure to meet requirements of public use specified by federal regulations. Federal law requires any licensor of an invention that was partially funded by the federal government to obtain a covenant from any exclusive licensee to manufacture products using the invention substantially in the United States. The U.S. government also has the right to use and disclose, without limitation, scientific data relating to licensed technology

that was developed in whole or in part at government expense. The government funding agency can elect to exercise these march‑in rights on their own initiative or at the request of a third party. It is also possible that we might knowingly or unknowingly in-license additional technology that is subject to U.S. government march-in rights.

We intend to file applications for trademark registrations in connection with our product candidates in various jurisdictions, including the United States. No assurance can be given that any of our trademark applications will be registered in the United States or elsewhere, or that the use of any registered or unregistered trademarks will confer a competitive advantage in the marketplace. Furthermore, even if we are successful in our trademark registrations, the FDA and regulatory authorities in other countries have their own process for drug nomenclature and their own views concerning appropriate proprietary names. No assurance can be given that the FDA or any other regulatory authority will approve of any of our trademarks or will not request reconsideration of one of our trademarks at some time in the future. The loss, abandonment, or cancellation of any of our trademarks or trademark applications could negatively affect the success of the product candidates to which they relate.

If we are not able to prevent disclosure of our trade secrets and other proprietary information, the value of our technology and products could be significantly diminished.

We rely on trade secret protection to protect our interests in proprietary know‑how and in processes for which patents are difficult to obtain or enforce. We may not be able to protect our trade secrets adequately. We have a policy of requiring our consultants, advisors and collaborators to enter into confidentiality agreements and our employees to enter into invention, non‑disclosure and non‑compete agreements. However, no assurance can be given that we have entered into appropriate agreements with all parties that have had access to our trade secrets, know‑how or other proprietary information. There is also no assurance that such agreements will provide for a meaningful protection of our trade secrets, know‑how or other proprietary information in the event of any unauthorized use or disclosure of information. Furthermore, we cannot provide assurance that any of our employees, consultants, contract personnel, or collaborators, either accidentally or through willful misconduct, will not cause serious damage to our programs and/or our strategy, for example by disclosing important trade secrets, know‑how or proprietary information to our competitors. It is also possible that our trade secrets, know‑how or other proprietary information could be obtained by third parties as a result of breaches of our physical or electronic security systems. Any disclosure of confidential data into the public domain or to third parties could allow our competitors to learn our trade secrets and use the information in competition against us. In addition, others may independently discover our trade secrets and proprietary information. Any action to enforce our rights is likely to be time consuming and expensive, and may ultimately be unsuccessful, or may result in a remedy that is not commercially valuable. These risks are accentuated in foreign countries where laws or law enforcement practices may not protect proprietary rights as fully as in the United States or Europe. Any unauthorized disclosure of our trade secrets or proprietary information could harm our competitive position.

We may be required to reduce the scope of our intellectual property due to third‑party intellectual property claims.

Our competitors may have filed, and may in the future file, patent applications covering technology similar to ours. Any such patent application may have priority over our patent applications, which could further require us to obtain rights to issued patents covering such technologies. If another party has filed a U.S. patent application on inventions similar to ours that claims priority to an application filed prior to March 16, 2013, we may have to participate in an interference proceeding declared by the PTO to determine priority of invention in the United States. The costs of these proceedings could be substantial, and it is possible that such efforts would be unsuccessful if, unbeknownst to us, the other party had independently arrived at the same or similar invention prior to our own invention, resulting in a loss of our U.S. patent position with respect to such inventions. In addition, changes enacted on March 15, 2013 to the U.S. patent laws under the America Invents Act resulted in the United States changing from a “first to invent” country to a “first to file” country. As a result, we may lose the ability to obtain a patent if a third party files with the PTO first and could become involved in proceedings before the PTO to resolve disputes related to inventorship. We may also become involved in similar proceedings in other jurisdictions.

Furthermore, recent changes in U.S. patent law under the America Invents Act allows for post‑issuance challenges to U.S. patents, including ex parte reexaminations, inter parte reviews and post‑grant oppositions. There is significant uncertainty as to how the new laws will be applied and if our U.S. patents are challenged using such

procedures, we may not prevail, possibly resulting in altered or diminished claim scope or loss of patent rights altogether. Similarly, some countries, notably members of the European Union, also have post grant opposition proceedings that can result in changes in scope and/or cancellation of patent claims.

Our products could infringe patents and other property rights of others, which may result in costly litigation and, if we are not successful, could cause us to pay substantial damages or limit our ability to commercialize our products, which could have a material adverse effect on our business.

Our commercial success depends upon our ability, and the ability of our collaborators, to develop, manufacture, market and sell our product candidates and use our proprietary technologies without infringing the patents and other proprietary rights of third parties. There is considerable intellectual property litigation in the biotechnology and pharmaceutical industries. For example, we are aware of issued U.S. patents and patent applications owned by Genentech that may relate to and claim components of certain of our product candidates, including XmAb5871, XmAb7195 and XmAb5574/MOR208 or their manufacture. We believe that these patents and patent applications will expire in the United States in 2020 and 2021, respectively, but it is possible that the terms could be extended, for example, as a result of patent term restoration to compensate for regulatory delays. While we believe that our current development of these candidates currently falls into the “safe harbor” of non‑infringement under 35 U.S.C. §271(e)(1), this protection terminates upon commercialization. In addition, there can be no assurance that our interpretation of this statutory exemption would be upheld. Furthermore, while we believe that claims in these patents are either invalid or not infringed, we cannot assure you that if we were sued for infringement of these patents that we would prevail. In order to successfully challenge the validity of any issued U.S. patent, we would need to overcome a presumption of validity. This burden is a high one requiring us to present clear and convincing evidence as to the invalidity of such claims. There is no assurance that a court would find these claims to be invalid or not infringed.

In addition, as the biopharmaceutical industry expands and more patents are issued, the risk increases that there may be patents issued to third parties that relate to our products and technology of which we are not aware or that we must challenge to continue our operations as currently contemplated. Our products may infringe or may be alleged to infringe these patents. Because some patent applications in the United States may be maintained in secrecy until the patents are issued, because patent applications in the United States and many foreign jurisdictions are typically not published until eighteen months after filing and because publications in the scientific literature often lag behind actual discoveries, we cannot be certain that others have not filed patents that may cover our technologies, our product candidates or their use. Additionally, pending patent applications which have been published can, subject to certain limitations, be later amended in a manner that could cover our technologies, our products or the use of our products. We may become party to, or threatened with, future adversarial proceedings or litigation regarding intellectual property rights with respect to our products and technology. Third parties may assert infringement claims against us based on existing patents or patents that may be granted in the future.

If we are sued for patent infringement, we would need to demonstrate that our products or methods either do not infringe the patent claims of the relevant patent or that the patent claims are invalid, and we may not be able to do this. Proving invalidity is difficult. For example, in the United States, proving invalidity requires a showing of clear and convincing evidence to overcome the presumption of validity enjoyed by issued patents. Even if we are successful in these proceedings, we may incur substantial costs and divert management’s time and attention in pursuing these proceedings, which could have a material adverse effect on us.

Any such claims are likely to be expensive to defend, and some of our competitors may be able to sustain the costs of complex patent litigation more effectively than we can because they have substantially greater resources.

If we are found to infringe a third party’s intellectual property rights, we could be required to obtain a license from such third party to continue developing and marketing our products and technology. We may also elect to enter into such a license in order to settle litigation or in order to resolve disputes prior to litigation. However, we may not be able to obtain any required license on commercially reasonable terms or at all. Even if we were able to obtain a license, it could be non‑exclusive, thereby giving our competitors access to the same technologies licensed to us, and could require us to make substantial royalty payments. We could also be forced, including by court order, to cease commercializing the infringing technology or product. In addition, we could be found liable for monetary damages, including treble damages and attorneys’ fees if we are found to have willfully infringed a patent. A finding of infringement could prevent

us from commercializing our product candidates or force us to cease some of our business operations, which could materially harm our business. Claims that we have misappropriated the confidential information or trade secrets of third parties could have a similar negative impact on our business.

Our intellectual property may be infringed upon by a third party.

Third parties may infringe one or more of our issued patents or trademarks. We cannot predict if, when or where a third party may infringe one or more of our issued patents or trademarks. To counter infringement, we may be required to file infringement claims, which can be expensive and time consuming. There is no assurance that we would be successful in a court of law in proving that a third party is infringing one or more of our issued patents or trademarks. Any claims we assert against perceived infringers could also provoke these parties to assert counterclaims against us, alleging that we infringe their intellectual property. In addition, in a patent infringement proceeding, a court may decide that a patent of ours is invalid or unenforceable, in whole or in part, construe the patent’s claims narrowly and/or refuse to stop the other party from using the technology at issue on the grounds that our patents do not cover the technology in question, any of which may adversely affect our business. Even if we are successful in proving in a court of law that a third party is infringing one or more of our issued patents or trademarks there can be no assurance that we would be successful in halting their infringing activities, for example, through a permanent injunction, or that we would be fully or even partially financially compensated for any harm to our business. We may be forced to enter into a license or other agreement with the infringing third party at terms less profitable or otherwise commercially acceptable to us than if the license or agreement were negotiated under conditions between those of a willing licensee and a willing licensor. We may not become aware of a third‑party infringer within legal timeframes for compensation or at all, thereby possibly losing the ability to be compensated for any harm to our business. Such a third party may be operating in a foreign country where the infringer is difficult to locate and/or the intellectual property laws may be more difficult to enforce. Some third‑party infringers may be able to sustain the costs of complex infringement litigation more effectively than we can because they have substantially greater resources. Any inability to stop third‑party infringement could result in loss in market share of some of our products or even lead to a delay, reduction and/or inhibition of the development, manufacture or sale of certain products by us. There is no assurance that a product produced and sold by a third‑party infringer would meet our or other regulatory standards or would be safe for use. Such third‑party infringer products could irreparably harm the reputation of our products thereby resulting in substantial loss in market share and profits.

We may be subject to claims that our employees, consultants or independent contractors have wrongfully used or disclosed confidential information of third parties.

We employ individuals who were previously employed at other biotechnology or pharmaceutical companies. We may be subject to claims that we or our employees, consultants or independent contractors have inadvertently or otherwise used or disclosed confidential information of our employees’ former employers or other third parties. We may also be subject to claims that former employers or other third parties have an ownership interest in our patents. Litigation may be necessary to defend against these claims. There is no guarantee of success in defending these claims, and if we do not prevail, we could be required to pay substantial damages and could lose rights to important intellectual property. Even if we are successful, litigation could result in substantial cost and be a distraction to our management and other employees.

Risks Related to Employee Matters and Managing Growth and Other Risks Related to Our Business

We are subject to competition for our skilled personnel and may experience challenges in identifying and retaining key personnel that could impair our ability to conduct and grow our operations effectively.

Our future success depends on our ability to retain our executive officers and to attract, retain and motivate qualified personnel. If we are not successful in attracting and retaining highly qualified personnel, we may not be able to successfully implement our business strategy. Although we have not experienced problems attracting and retaining highly qualified personnel in the recent past, our industry has experienced a high rate of turnover of management personnel in recent years. Our ability to compete in the highly competitive biotechnology and pharmaceuticals industries depends upon our ability to attract and retain highly qualified management, scientific and medical personnel. We are highly dependent on our current management team, whose services are critical to the successful implementation of our product candidate development and regulatory strategies. In order to induce valuable employees to continue their employment with us, we have provided stock options that vest over time. The value to employees of stock options that

vest over time is significantly affected by movements in our stock price that are beyond our control, and may at any time be insufficient to counteract more lucrative offers from other companies.

Despite our efforts to retain valuable employees, members of our management team may terminate their employment with us at any time, with or without notice. Further, we do not maintain “key person” insurance for any of our executives or other employees. The loss of the services of any of our executive officers and our inability to find suitable replacements could harm our business, financial condition, prospects and ability to achieve the successful development or commercialization of our product candidates. Our success also depends on our ability to continue to attract, retain and motivate highly skilled scientific and medical personnel at all levels.

We may experience growth in the number of our employees and the scope of our operations, especially in clinical development. This growth will place a significant strain on our management, operations and financial resources, and we may have difficulty managing this future potential growth. Moreover, no assurance can be provided that we will be able to attract new employees to assist in our growth. Many of the other biotech and pharmaceutical companies and academic institutions that we compete against for qualified personnel have greater financial and other resources, different risk profiles and a longer history in the industry than we do. We also may employ consultants or part‑time and contract employees. There can be no assurance that these individuals are retainable. While we have been able to attract and retain skilled and experienced personnel and consultants in the past, no assurance can be given that we will be able to do so in the future.

We may become subject to the risk of product liability claims.

We face an inherent risk of product liability as a result of the clinical testing of our product candidates and will face an even greater risk if we or our partners commercialize any products. Human therapeutic products involve the risk of product liability claims and associated adverse publicity. Currently, the principal risks we face relate to patients in our clinical trials, who may suffer unintended consequences. Claims might be made by patients, healthcare providers or pharmaceutical companies or others. For example, we may be sued if any product we develop allegedly causes injury or is found to be otherwise unsuitable during clinical testing, manufacturing, marketing or sale. Any such product liability claims may include allegations of defects in manufacturing, defects in design, a failure to warn of dangers inherent in the product, negligence, strict liability and a breach of warranties. Claims could also be asserted under state consumer protection acts. If we cannot successfully defend ourselves against product liability claims, we may incur substantial liabilities or be required to limit commercialization of our product candidates, if approved. Even successful defense would require significant financial and management resources. Regardless of the merits or eventual outcome, liability claims may result in:

We may not have or be able to obtain or maintain sufficient and affordable insurance coverage to cover product liability claims, and without sufficient coverage any claim brought against us could have a materially adverse effect on our business, financial condition or results of operations. We run clinical trials through investigators that could be negligent through no fault of our own and which could affect patients, cause potential liability claims against us and result in delayed or stopped clinical trials. We are required by contractual obligations to indemnify collaborators, partners, third‑party contractors, clinical investigators and institutions. These indemnifications could result in a material impact due to product liability claims against us and/or these groups. We currently carry at least $10.0 million in product liability insurance, which we believe is appropriate for our current clinical trials. Although we maintain such insurance, any claim that may be brought against us could result in a court judgment or settlement in an amount that is not covered, in whole or in part, by our insurance or that is in excess of the limits of our insurance coverage. Our insurance policies also have various exclusions, and we may be subject to a product liability claim for which we have no coverage. We will have to pay any amounts awarded by a court or negotiated in a settlement that exceed our coverage limitations or that are not covered by our insurance, and we may not have, or be able to obtain, sufficient capital to pay such amounts. We may also need to expand our insurance coverage as our business grows or if any of our product candidates is commercialized. We may not be able to maintain or increase insurance coverage at a reasonable cost or in an amount adequate to satisfy any liability that may arise.

Our employees may engage in misconduct or other improper activities, including noncompliance with regulatory standards and requirements and insider trading.

We are exposed to the risk of employee fraud or other misconduct. Misconduct by employees could include intentional failures to comply with FDA regulations, to provide accurate information to the FDA, to comply with manufacturing standards we have established, to comply with federal and state healthcare fraud and abuse laws and regulations, or to report financial information or data accurately or disclose unauthorized activities to us. In particular, sales, marketing and business arrangements in the healthcare industry are subject to extensive laws and regulations intended to prevent fraud, misconduct, kickbacks, self‑dealing and other abusive practices. These laws and regulations may restrict or prohibit a wide range of pricing, discounting, marketing and promotion, sales commission, customer incentive programs and other business arrangements. Employee misconduct could also involve the improper use of information obtained in the course of clinical trials, which could result in regulatory sanctions and serious harm to our reputation. We have adopted a Code of Business Conduct and Ethics, but it is not always possible to identify and deter employee misconduct, and the precautions we take to detect and prevent this activity may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to be in compliance with such laws or regulations. If any such actions are instituted against us, and we are not successful in defending ourselves or asserting our rights, those actions could have a significant impact on our business, including the imposition of significant fines or other sanctions, and our reputation.

In addition, during the course of our operations our directors, executives, and employees may have access to material, nonpublic information regarding our business, our results of operations, or potential transactions we are considering. We may not be able to prevent a director, executive, or employee from trading in our common stock on the basis of, or while having access to, material, nonpublic information. If a director, executive, or employee was to be investigated or an action was to be brought against a director, executive, or employee for insider trading, it could have a negative impact on our reputation and our stock price. Such a claim, with or without merit, could also result in substantial expenditures of time and money, and divert attention of our management team from other tasks important to the success of our business.

We may be vulnerable to disruption, damage and financial obligation as a result of system failures.

Despite the implementation of security measures, any of the internal computer systems belonging to us, our collaborators or our third‑party service providers are vulnerable to damage from computer viruses, unauthorized access, natural disasters, terrorism, war and telecommunication and electrical failure. Any system failure, accident or security breach that causes interruptions in our own, in collaborators’ or in third‑party service vendors’ operations could result in a material disruption of our drug discovery and development programs. For example, the loss of clinical trial data from completed or future clinical trials could result in delays in our or our partners’ regulatory approval efforts and significantly increase our costs in order to recover or reproduce the lost data. To the extent that any disruption or security

breach results in a loss or damage to our data or applications, or inappropriate disclosure of confidential or proprietary information, we may incur liability as a result, our drug discovery programs and competitive position may be adversely affected and the further development of our product candidates may be delayed. Furthermore, we may incur additional costs to remedy the damages caused by these disruptions or security breaches.

Our business involves the controlled use of hazardous materials and as such we are subject to environmental and occupational safety laws. Continued compliance with these laws may incur substantial costs and failure to maintain compliance could result in liability for damages that may exceed our resources.

Our research, manufacturing and development processes, and those of our third‑party contractors and partners, involve the controlled use of hazardous materials. We and our manufacturers are subject to federal, state and local laws and regulations governing the use, manufacture, storage, handling and disposal of such materials and certain waste products. Our operations involve the use of hazardous and flammable materials, including chemicals and biological materials. Our operations also produce hazardous waste products. The risk of accidental contamination or injury from these materials cannot be completely eliminated. In the event of such an accident, we could be held liable for any damages that result, and any such liability could exceed our resources. We are not insured against this type of liability. We may be required to incur significant costs to comply with environmental laws and regulations in the future, and our operations, business or assets may be materially adversely affected by current or future environmental laws or regulations or any liability thereunder.

Risks Related to Ownership of Our Common Stock

The market price of our common stock is likely to be highly volatile, and you could lose all or part of your investment.

Prior to our recently completed initial public offering, there was no public market for our common stock. The trading price of our common stock is likely to be volatile. Since our IPO, the trading price of our common stock has ranged from a low of approximately $5.75 to a high of approximately $24.82. Our stock price could be subject to wide fluctuations in response to a variety of factors, including the following:

In addition, the stock market in general, and the NASDAQ Global Market and biotechnology companies in particular, have experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of these companies. Broad market and industry factors may negatively affect the market price of our common stock, regardless of our actual operating performance.

In the past, securities class action litigation has often been brought against a company following a decline in the market price of its securities. This risk is especially relevant for us because biopharmaceutical companies have experienced significant stock price volatility in recent years. If we face such litigation, it could result in substantial costs and a diversion of management’s attention and resources, which could harm our business.

Our principal stockholders, directors and management own a significant percentage of our stock and will be able to exert significant control over matters subject to stockholder approval.

Based on information available to us as of December 31, 2015 our executive officers, directors, 5% stockholders and their affiliates beneficially owned, as a group, approximately 44% of our voting stock. Further John S. Stafford III, a former director of the Company, beneficially owns approximately 17.9%  of our voting stock and his family members beneficially own approximately an additional 8.2%  of our voting stock.

Therefore, our officers, directors and 5% stockholders and their affiliates, including Mr. Stafford, will have the ability to influence us through this ownership position and so long as they continue to beneficially own a significant amount of our outstanding voting stock. These stockholders may be able to determine all matters requiring stockholder approval and this concentration of ownership may deprive other stockholders from realizing the true value of our common stock. For example, these stockholders, acting together, may be able to control elections of directors, amendments of our organizational documents, or approval of any merger, sale of assets, or other major corporate transaction. This may prevent or discourage unsolicited acquisition proposals, offers for our common stock or other transactions or arrangements that you may believe are in your best interest as one of our stockholders.

We are an “emerging growth company,” and we cannot be certain if the reduced reporting requirements applicable to emerging growth companies will make our common stock less attractive to investors.

We are an “emerging growth company,” as defined in the JOBS Act. For as long as we continue to be an emerging growth company, we may take advantage of exemptions from various reporting requirements that are applicable to other public companies that are not “emerging growth companies,” including:

We will remain an emerging growth company until the earlier of (1) December 31, 2018, (2) the last day of the fiscal year (a)  in which we have total annual gross revenue of at least $1 billion, or (b) in which we are deemed to be a large accelerated filer, which means the market value of our common stock that is held by non‑affiliates exceeds $700 million as of the prior June 30th, and (3) the date on which we have issued more than $1 billion in non‑convertible debt during the prior three‑year period.

Under the JOBS Act, emerging growth companies can also delay adopting new or revised accounting standards until such time as those standards apply to private companies. We have irrevocably elected not to avail ourselves of this exemption from new or revised accounting standards and, therefore, will be subject to the same new or revised accounting standards as other public companies that are not emerging growth companies.

We cannot predict if investors will find our common stock less attractive because we are an emerging growth company. If some investors find our common stock less attractive as a result, there may be a less active trading market for our common stock and our stock price may be more volatile.

Raising additional funds through debt or equity financing may be dilutive or restrict our operations and raising funds through licensing may require us to relinquish rights to our technology or product candidates.

To the extent that additional capital is raised through the sale of equity or convertible debt securities, the issuance of those securities could result in substantial dilution for our current stockholders and the terms may include liquidation or other preferences that adversely affect the rights of our current stockholders. Existing stockholders may not agree with our financing plans or the terms of such financings. Moreover, the incurrence of debt financing could result in a substantial portion of our operating cash flow being dedicated to the payment of principal and interest on such indebtedness and could impose restrictions on our operations. Debt financing and preferred equity financing, if available, may involve agreements that include covenants limiting or restricting our ability to take specific actions, such as incurring additional debt, making capital expenditures or declaring dividends. In addition, if we raise additional funds through product development partnerships and licensing arrangements, it may be necessary to relinquish potentially valuable rights to our products or proprietary technologies, or grant licenses on terms that are not favorable to us. If we are unable to obtain additional funding on required timelines, we may be required to (1) seek collaborators for one or more of our product candidates at an earlier stage than otherwise would be desirable or on terms that are less favorable than might otherwise be available; (2) relinquish or license on unfavorable terms our rights to technologies or product candidates that we otherwise would seek to develop or commercialize ourselves; or (3) significantly curtail one or more of our research or development programs or cease operations altogether. Additional funding may not be available to us on acceptable terms, or at all.

The clinical development stage of our operations may make it difficult for you to evaluate the success of our business to date and to assess our future viability.

Our operations to date have been limited to organizing and staffing our company, business planning, raising capital, developing our proprietary XmAb technology platform, identifying potential product candidates, and conducting preclinical studies and clinical trials. We have or are currently conducting early phase clinical trials for XmAb5871 and XmAb7195, but have not completed any late stage clinical trials for these or any other product candidate. We have not yet demonstrated our ability to successfully complete any pivotal clinical trials, obtain regulatory approvals, manufacture a commercial scale product, or arrange for a third party to do so on our behalf, or conduct sales and marketing activities

necessary for successful product commercialization. Consequently, any predictions you make about our future success or viability may not be as accurate as they could be if we were further advanced in development of our product candidates.

In addition, we may encounter unforeseen expenses, difficulties, complications, delays and other known and unknown factors. We will need to transition at some point from a company with a research and development focus to a company capable of supporting commercial activities. We may not be successful in such a transition.

We expect our financial condition and operating results to continue to fluctuate significantly from quarter to quarter and year to year due to a variety of factors, many of which are beyond our control. Accordingly, you should not rely upon the results of any quarterly or annual periods as indications of future operating performance.

If our internal control over financial reporting is not effective, we may not be able to accurately report our financial results or file our periodic reports in a timely manner, which may cause investors to lose confidence in our reported financial information and may lead to a decline in our stock price.

Effective internal control over financial reporting is necessary for us to provide reliable financial reports in a timely manner. For example, in connection with the audit of our financial statements for the year ended December 31, 2013, we concluded that there were a material weakness and significant deficiencies in our internal control over financial reporting. Although we have remediated the weakness and the significant deficiencies that were identified, if we fail to adequately staff our accounting and finance function to address the additional demands that will be placed upon us as a public company,  including the requirements of the Sarbanes‑Oxley Act of 2002, or fail to maintain adequate internal control over financial reporting, any new or recurring material weakness could prevent our management from concluding our internal control over financial reporting is effective and impair our ability to prevent material misstatements in our financial statements, which could cause our business to suffer.

Sales of a substantial number of shares of our common stock by our existing stockholders in the public market could cause our stock price to fall.

If our existing stockholders sell, or indicate an intention to sell, substantial amounts of our common stock in the public market, the trading price of our common stock could decline. In addition a substantial number of shares of common stock are subject to outstanding options that are or will become eligible for sale in the public market to the extent permitted by the provisions of various vesting schedules. If these additional shares of common stock are sold, or if it is perceived that they will be sold, in the public market, the trading price of our common stock could decline.

The holders of 7,780,621 shares of our common stock, or approximately 19.2% of our total outstanding common stock as of December 31, 2015, will be entitled to rights with respect to the registration of their shares under the Securities Act. Registration of these shares under the Securities Act would result in the shares becoming freely tradable without restriction under the Securities Act, except for shares held by affiliates, as defined in Rule 144 under the Securities Act. Any sales of securities by these stockholders could have a material adverse effect on the trading price of our common stock.

Future sales and issuances of our common stock or rights to purchase common stock, including pursuant to our equity incentive plans, could result in additional dilution of the percentage ownership of our stockholders and could cause our stock price to fall.

We expect that significant additional capital will be needed in the future to continue our planned operations. To the extent we raise additional capital by issuing equity securities, our stockholders may experience substantial dilution. We may sell common stock, convertible securities or other equity securities in one or more transactions at prices and in a manner we determine from time to time. If we sell common stock, convertible securities or other equity securities in more than one transaction, investors may be materially diluted by subsequent sales. These sales may also result in material dilution to our existing stockholders, and new investors could gain rights superior to our existing stockholders.

Pursuant to our 2013 equity incentive plan (2013 plan), our management is authorized to grant stock options and other equity‑based awards to our employees, directors and consultants. The number of shares available for future

grant under the 2013 plan will automatically increase each year by 4% of all shares of our capital stock outstanding as of December 31 of the prior calendar year, subject to the ability of our Board of Directors to take action to reduce the size of the increase in any given year. Generally, we plan to register the increased number of shares available for issuance under the 2013 plan each year. If our Board of Directors elects to increase the number of shares available for future grant by the maximum amount each year, our stockholders may experience additional dilution, which could cause our stock price to fall.

Our ability to use our net operating loss carryforwards and certain other tax attributes may be limited.

Under Section 382 of the Internal Revenue Code of 1986, as amended, if a corporation undergoes an “ownership change,” generally defined as a greater than 50% change (by value) in its equity ownership over a three‑year period, the corporation’s ability to use its pre‑change net operating loss carryforwards and other pre‑change tax attributes (such as research tax credits) to offset its post‑change income may be limited. Upon analysis, we believe that we triggered “ownership change” as a result of the sale of stock in connection with our IPO in December 2013 and our net operating loss and tax credit carryforwards have been limited as a result. The limitation of our tax credits and our net operating loss carryforwards could potentially result in increased future tax liability to us.

We may also experience ownership changes in the future as a result of future offerings and other subsequent shifts in our stock ownership. As a result, if we earn net taxable income, our ability to use our pre‑change net operating loss carryforwards to offset United States federal taxable income may be subject to limitations, which could potentially result in increased future tax liability to us.

We do not intend to pay dividends on our common stock so any returns will be limited to the value of our stock.

We have never declared or paid any cash dividend on our common stock. We currently anticipate that we will retain future earnings for the development, operation and expansion of our business and do not anticipate declaring or paying any cash dividends for the foreseeable future. Any return to stockholders will therefore be limited to the appreciation of their stock.

Provisions in our amended and restated certificate of incorporation and bylaws, as well as provisions of Delaware law, could make it more difficult for a third party to acquire us or increase the cost of acquiring us, even if doing so would benefit our stockholders or remove our current management.

Some provisions of our charter documents and Delaware law may have anti‑takeover effects that could discourage an acquisition of us by others, even if an acquisition would be beneficial to our stockholders and may prevent attempts by our stockholders to replace or remove our current management. These provisions include:

These provisions may frustrate or prevent any attempts by our stockholders to replace or remove our current management by making it more difficult for stockholders to replace members of our Board of Directors, which is responsible for appointing the members of our management. In addition, we are subject to Section 203 of the Delaware General Corporation Law, which generally prohibits a Delaware corporation from engaging in any of a broad range of business combinations with an interested stockholder for a period of three years following the date on which the

stockholder became an interested stockholder, unless such transactions are approved by our Board of Directors. This provision could have the effect of delaying or preventing a change of control, whether or not it is desired by or beneficial to our stockholders. Further, other provisions of Delaware law may also discourage, delay or prevent someone from acquiring us or merging with us. Any provision of our certificate of incorporation or bylaws or Delaware law that has the effect of delaying or deterring a change in control could limit the opportunity for our stockholders to receive a premium for their shares of our common stock, and could also affect the price that some investors are willing to pay for our common stock.

Requirements associated with being a public reporting company will continue to increase our costs significantly, as well as divert significant company resources and management attention.

We have only been subject to the reporting requirements of the Exchange Act and the other rules and regulations of the Securities and Exchange Commission (SEC) since December 2013. We are working with our legal, independent accounting, and financial advisors to identify those areas in which changes should be made to our financial and management control systems to manage our growth and our obligations as a public reporting company. These areas include corporate governance, corporate control, disclosure controls and procedures, and financial reporting and accounting systems. We have made, and will continue to make, changes in these and other areas. Compliance with the various reporting and other requirements applicable to public reporting companies will require considerable time, attention of management, and financial resources. In addition, the changes we make may not be sufficient to allow us to satisfy our obligations as a public reporting company on a timely basis.

Further, the listing requirements of The NASDAQ Global Market require that we satisfy certain corporate governance requirements relating to director independence, distributing annual and interim reports, stockholder meetings, approvals and voting, soliciting proxies, conflicts of interest and a code of conduct. Our management and other personnel will need to devote a substantial amount of time to ensure that we comply with all of these requirements. Moreover, the reporting requirements, rules and regulations will increase our legal and financial compliance costs and will make some activities more time‑consuming and costly. These reporting requirements, rules and regulations, coupled with the increase in potential litigation exposure associated with being a public company, could also make it more difficult for us to attract and retain qualified persons to serve on our board of directors or board committees or to serve as executive officers, or to obtain certain types of insurance, including directors’ and officers’ insurance, on acceptable terms.

In addition, being a public company could make it more difficult or more costly for us to obtain certain types of insurance, including directors’ and officers’ liability insurance, and we may be forced to accept reduced policy limits and coverage or incur substantially higher costs to obtain the same or similar coverage. The impact of these events could also make it more difficult for us to attract and retain qualified persons to serve on our board of directors, our board committees or as executive officers.

Any changes we make to comply with these obligations may not be sufficient to allow us to satisfy our obligations as a public company on a timely basis, or at all.

Item 1B.  Unresolved Staff Comments.

Not applicable.

Item 2.  Properties.

Our principal laboratory and administrative facilities are located in Monrovia, California, which is located in the greater Los Angeles region. We currently lease approximately 24,000 square feet of laboratory and office space in Monrovia, California under a lease that expires June 2020, subject to our right to extend for an additional five years at then market rates. In addition we lease office space in San Diego, California. We believe that our existing facilities are adequate to meet our current needs, and that suitable additional alternative spaces will be available in the future on commercially reasonable terms.

Item 3. Legal Proceedings.

On March  3, 2015, a verified class action complaint, captioned DePinto v. John S. Stafford, et al., C.A. No. 10742, was filed in the Court of Chancery of the State of Delaware against certain of the Company's current and former directors alleging cause of action for Breach of Fiduciary Duty and Invalidity of Director and Stockholder Consents.  In general, the complaint alleged that the plaintiff and the class he seeks to represent were shareholders of the Company during the recapitalization and certain related transactions that the Company underwent in 2013 and that the defendants breached their fiduciary duties in the course of approving that series of transactions. It also challenged as invalid certain corporate acts taken in the 2013 time period. On June 10, 2015, the Company filed a Verified Petition for Relief under Del. C. Section 205 (the 205 Petition) related to the corporate acts challenged in the complaint. The defendants filed an answer to the class action complaint on June 22, 2015. On July 9, 2015, the Court consolidated the 205 Petition with the class action, joined the Company as a defendant and ordered it to file the claims in the 205 Petition as counter-claims in the class action, which the Company has done.

On August 11, 2015, the Company filed a Motion for Leave to File an Amended Counter-Claim, along with the proposed Amended Counter-Claim and related documents. On October 5, 2015, the parties filed a Stipulation of Partial Settlement and related documents disclosing a settlement of the invalidity claims addressed in the complaint, the counter-claim and the proposed amended counter-claim including a request by plaintiff's counsel for reimbursement of legal fees up to $950,000. On October 7, 2015, Xencor filed the Amended Counter-Claim and the related documents. On December 14, 2015, the Court entered an Order and Partial Final Judgement approving the settlement of the invalidity claims, validating each corporate act challenged in the complaint, dismissing with prejudice Count II of the complaint (the invalidity claims) and granting plaintiff’s counsel a fee award of $950,000.

Item 4. Mine Safety Disclosures.

Not applicable.

PART II

Item 5.  Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Market Information

Our common stock began trading on The NASDAQ Global Market on December 3, 2013 under the symbol “XNCR.” Prior to such time, there was no public market for our common stock. The following table sets forth the high and low sales prices per share of our common stock as reported on The NASDAQ Global Market for the period indicated. On February 29, 2016, the closing price for our common stock as reported on the NASDAQ Global Market

was $11.00. The following table sets forth the high and low sales prices per share of our common stock as reported on the NASDAQ Global Market for the periods indicated. 

:Holders of Record

As of February 29, 2016, we had 40,582,039 shares of common stock outstanding held by approximately 446 stockholders of record. The actual number of stockholders is greater than this number of record holders, and includes stockholders who are beneficial owners, but whose shares are held in street name by brokers and other nominees. This number of holders of record also does not include stockholders whose shares may be held in trust by other entities.

Dividend Policy

We have never declared or paid any cash dividends on our common stock. We currently intend to retain all available funds and any future earnings to support our operations and finance the growth and development of our business. We do not intend to pay cash dividends on our common stock for the foreseeable future. Any future determination related to our dividend policy will be made at the discretion of our board of directors and will depend upon, among other factors, our results of operations, financial condition, capital requirements, contractual restrictions, business prospects and other factors our board of directors may deem relevant.

Securities Authorized for Issuance Under Equity Compensation Plans

Information about our equity compensation plans is incorporated herein by reference to Item 12 of Part III of this Annual Report.

Performance Graph

The following graph shows a comparison from December 31, 2014 through December 31, 2015 of the cumulative total return for our common stock, the NASDAQ Biotechnology Index (NBI) and the NASDAQ Composite Index (CCMP). The graph assumes an initial investment of $100 on December 31, 2014 and assumes reinvestment of the

full amount of all dividends, if any. The comparisons in the graph are not intended to forecast or be indicative of possible future performance of our common stock.

The performance graph shall not be deemed to be incorporated by reference by means of any general statement incorporating by reference this Form 10‑K into any filing under the Securities Act of 1933, as amended or the Exchange Act, except to the extent that we specifically incorporate such information by reference, and shall not otherwise be deemed filed under such acts.

Recent Sales of Unregistered Securities

There were no sales of unregistered securities during the year ended December 31, 2015.

Use of Proceeds

On December 2, 2013, we commenced our initial public offering (IPO) pursuant to a registration statement on Form S‑1 (File No. 333‑191689) that was declared effective by the SEC on December 3, 2013 and that registered an aggregate of 14,639,500 shares of our common stock for sale to the public at a price of $5.50 per share and an aggregate offering price of $80,517,250. The net offering proceeds to us, after deducting underwriting discounts and commissions and offering costs, were approximately $72.5 million.

In March 2015, we completed the sale of 8,625,000 shares of common stock which included shares we issued pursuant to our underwriters’ exercise of their over-allotment option pursuant to a follow-on offering. We received net proceeds of $115.2 million, after underwriting discounts, commissions and estimated offering expenses.

As of December 31, 2015, we have invested the net proceeds from our IPO in money market and corporate and government securities. We have used and intend to continue to use the net proceeds of our IPO to fund the clinical development of XmAb5871 and XmAb7195, the preclinical development of XmAb14045 and XmAb13676 product candidate discovery, technology development, patent prosecution activities, working capital and other general corporate purposes. The amounts and timing of our actual expenditures depend on numerous factors, including the ongoing status of and results from clinical trials and other studies, as well as any strategic partnerships that we may enter into with third parties for our drug candidates and any unforeseen cash needs. As a result, we retain broad discretion over the allocation of the net proceeds from our IPO and the concurrent private placement and could spend the proceeds in ways that do not improve our results of operations or enhance the value of our stock.

Purchases of Equity Securities by the Issuer and Affiliated Purchasers

None.

Item 6.  Selected Financial Data.

The selected financial data set forth below is derived from our audited financial statements and may not be indicative of future operating results. The following selected financial data should be read in conjunction with the financial statements and notes thereto and Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” included elsewhere in this Annual Report. The selected financial data in this section are not intended to replace our financial statements and the related notes. Our historical results are not necessarily indicative of our future results. Amounts are in thousands, except per share amounts.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Item 7.  Management’s Discussion and Analysis of Financial Condition and Results of Operations.

You should read the following discussion and analysis together with “Item 6. Selected Financial Data” and our financial statements and related notes included elsewhere in this Annual Report. The following discussion contains forward‑looking statements that involve risks and uncertainties. Our actual results could differ materially from those expressed or implied in any forward‑looking statements as a result of various factors, including those set forth under the caption “Item 1A. Risk Factors.”

Overview

We are a clinical‑stage biopharmaceutical company focused on discovering and developing engineered monoclonal antibodies to treat severe and life‑threatening diseases with unmet medical needs. We use our proprietary XmAb technology platform to create next‑generation antibody product candidates designed to treat autoimmune and allergic diseases, cancer and other conditions. In contrast to conventional approaches to antibody design, which focus on the portion of antibodies that interact with target antigens, we focus on the portion of the antibody that interacts with multiple segments of the immune system and controls antibody structure. This portion, referred to as the Fc domain, is constant and interchangeable among antibodies. Our engineered Fc domains, the XmAb technology, can be readily substituted for natural Fc domains. We believe our Fc domains enhance antibody performance by, for example, increasing immune inhibitory activity, improving cytotoxicity or extending circulating half‑life or stabilizing novel antibody structures, while maintaining 99.5% identity in structure and sequence to natural antibodies. The newest aspect of our platform is the XmAb bispecific Fc domains, which enable the rapid design and simplified development of antibodies that bind two or more antigens simultaneously.  By improving over natural antibody function, we believe that our XmAb‑engineered antibodies offer innovative approaches to treating disease and potential clinical advantages over other treatments.

Our business strategy is based on the plug‑and‑play nature of the XmAb technology, allowing us to create new antibody drug candidates for our internal development or licensing, or to selectively license access to one or more of our XmAb technologies to pharmaceutical or biotechnology companies to use in developing their own proprietary antibodies with improved properties.  These licensing transactions provide us with multiple revenue streams that help fund development of our wholly-owned product candidates and usually require limited resources or efforts from Xencor.