Use these links to rapidly review the document
TABLE OF CONTENTS
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

Table of Contents

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

Form 10-K

Commission file number: 000-24085

AXT, INC.
(Exact name of registrant as specified in its charter)

Registrant's telephone number, including area code: (510) 683-5900
Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:
None

         Indicate by checkmark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act o Yes ý No

         Indicate by checkmark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. o Yes ý No

         Indicate by checkmark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15 (d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. ý Yes o No

         Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). o Yes o No

         Indicate by checkmark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ý

         Indicate by checkmark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of "large accelerated filer," "accelerated filer," and "smaller reporting company" in Rule 12b-2 of the Act. (Check one):

         Indicate by checkmark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). o Yes ý No

         The aggregate market value of the voting stock held by non-affiliates of the registrant, based upon the closing sale price of the common stock on June 30, 2009 as reported on the Nasdaq Global Market, was approximately $32,225,971. Shares of common stock held by each officer, director and by each person who owns 5% or more of the outstanding common stock have been excluded in that such persons may be deemed to be affiliates. This determination of affiliate status is not a conclusive determination for other purposes.

         As of February 25, 2010, 30,880,515 shares, $0.001 par value, of the registrant's common stock were outstanding.

         DOCUMENTS INCORPORATED BY REFERENCE

         Portions of the definitive proxy statement for the registrant's 2010 annual meeting of stockholders to be filed with the Commission pursuant to Regulation 14A not later than 120 days after the end of the fiscal year covered by this form are incorporated by reference into Part III of this Form 10-K report. Except for those portions specifically incorporated by reference herein, such document shall not be deemed to be filed with the Commission as part of this Form 10-K.

---

Table of Contents

TABLE OF CONTENTS

1

---

Table of Contents

PART I

        This Annual Report (including the following section regarding Management's Discussion and Analysis of Financial Condition and Results of Operations) contains forward-looking statements regarding our business, financial condition, results of operations and prospects. Words such as "expects," "anticipates," "intends," "plans," "believes," "seeks," "estimates" and similar expressions or variations of such words are intended to identify forward-looking statements, but are not the exclusive means of identifying forward-looking statements in this Annual Report. Additionally, statements concerning future matters such as industry trend, the development of new products, enhancements or technologies, sales levels, expense levels and other statements regarding matters that are not historical are forward-looking statements.

        Although forward-looking statements in this Annual Report reflect the good faith judgment of our management, such statements can only be based on facts and factors currently known by us. Consequently, forward-looking statements are inherently subject to risks and uncertainties and actual results and outcomes may differ materially from the results and outcomes discussed in or anticipated by the forward-looking statements. Factors that could cause or contribute to such differences in results and outcomes include without limitation those discussed under the heading "Risk Factors" in Item 1A below, as well as those discussed elsewhere in this Annual Report. Readers are urged not to place undue reliance on these forward-looking statements, which speak only as of the date of this Annual Report. We undertake no obligation to revise or update any forward-looking statements in order to reflect any event or circumstance that may arise after the date of this Annual Report. Readers are urged to carefully review and consider the various disclosures made in this Annual Report, which attempt to advise interested parties of the risks and factors that may affect our business, financial condition, results of operations and prospects.

Item 1.    Business

        AXT, Inc. ("AXT", "we," "us," and "our" refer to AXT, Inc. and all of its subsidiaries) is a leading developer and producer of high-performance compound and single element semiconductor substrates, including substrates made from gallium arsenide (GaAs), indium phosphide (InP) and germanium (Ge). We currently sell the following substrate products in the sizes and for the applications indicated:

        We manufacture all of our semiconductor substrates using our proprietary vertical gradient freeze (VGF) technology. Most of our revenue is from sales of GaAs substrates. We manufacture all of our products in the People's Republic of China (PRC or China), which generally has favorable costs for facilities and labor compared to comparable facilities in the United States, Europe or Japan. We also have five joint ventures in China that provide us favorable pricing, reliable supply and shorter lead-times for raw materials central to our final manufactured products. We consolidate, for accounting

2

---

Table of Contents

purposes, three of these joint ventures and have equity interests of 25% in each of the other two. We use our direct sales force in the United States and independent sales representatives in Europe and Asia to market our substrates. Our ten largest customers for 2009 were: Arima Optoelectronics Corporation, Avago Technologies Manufacturing (Singapore) Pte. Ltd., AZUR Space Solar Power GmbH, the IQE group, Osram Opto Semiconductors GmbH, Picogiga International SAS, Sumika Electronic Materials, Inc., Sumitomo Chemical Co., Ltd., Visual Photonics Epitaxy Co., Ltd., and Xiamen Sanan Optoelectronics Co., Ltd. As the demand for compound semiconductor substrates is expected to increase, we believe that we are well-positioned to leverage our PRC-based manufacturing capabilities and access to favorably priced raw materials to increase our market share.

        On March 17, 2009, our then-chief executive officer Dr. Philip C.S. Yin resigned as chairman of our Board and as chief executive officer. On July 20, 2009, the Board appointed Dr. Morris S. Young as chief executive officer. Dr. Young continues to serve as a member of the Board of Directors of the Company but is no longer eligible for compensation for his services as a director but instead would be paid compensation as disclosed on the Current Report on Form 8-K filed by the Company with the Securities and Exchange Commission on July 20, 2009. On October 29, 2009, we announced three executive promotions. Raymond A. Low, formerly AXT's vice president, corporate controller and acting chief financial officer, was appointed vice president and chief financial officer. Davis Zhang, formerly AXT's president of joint venture operations, was appointed president of AXT China Operations, with responsibility for managing and developing AXT's joint venture operations, as well as assisting the chief executive officer with the management of AXT's manufacturing facilities in China. Robert G. Ochrym, formerly AXT's vice president of business development, was appointed vice president of business development, strategic sales and marketing. His responsibilities include sales for the North American East Coast and Europe, and together with John J. Cerilli, vice president of global sales and marketing, maximizing customer support around the world. He will also be responsible for developing sales and marketing strategies, major sale contract negotiations, major market identification and other strategic sales and marketing functions. These executive promotions were disclosed on the Current Report on Form 8-K filed by the Company with the Securities and Exchange Commission on October 30, 2009.

        On March 28, 2008, we completed the sale of our Fremont, California facility and received net proceeds of approximately $5.1 million after deducting commissions and selling expenses. On July 1, 2008, we exercised our right to redeem the taxable variable rate revenue bond and repaid all outstanding indebtedness and accrued interest under the terms of the revenue bond of approximately $6.4 million. Accordingly, all of our remaining obligations under the revenue bond have terminated and the related restricted deposits have been released. In September 2008, we obtained an express line of credit from our bank and drew down $3 million and classified the same amount as restricted deposits as of December 31, 2008. The proceeds from the express line of credit were used in operations. In the fourth quarter of 2009 we paid down the $3 million line of credit. As of December 31, 2009, we had available cash, cash equivalents and short-term investments of $35.4 million.

        We were incorporated in California in December 1986 and reincorporated in Delaware in May 1998. We changed our name from American Xtal Technology, Inc. to AXT, Inc. in July 2000. Our principal corporate office is located at 4281 Technology Drive, Fremont, California 94538, and our telephone number at this address is (510) 683-5900.

Industry Background

        Certain electronic and opto-electronic applications have performance requirements that exceed the capabilities of conventional silicon substrates and often require high-performance compound or single element substrates. Examples of higher performance non-silicon based substrates include GaAs, InP, gallium nitride (GaN), silicon carbide (SiC) and Ge.

3

---

Table of Contents

        For example, power amplifiers and radio frequency integrated circuits for wireless handsets and other wireless devices are made with semi-insulating GaAs substrates. Semi-conducting GaAs substrates are used to create opto-electronic products including high brightness light emitting diodes (HBLEDs) which are often used to backlight wireless handsets and liquid crystal display (LCD) TVs and for automotive and general illumination applications. InP is a high performance semiconductor substrate used in broadband and fiber optic applications. Ge substrates are used in emerging applications such as solar cells for space and terrestrial photovoltaic applications.

        Our business and operating results depend in significant part upon capital expenditures of semiconductor designers and manufacturers, which in turn depend upon the current and anticipated market demand for products incorporating semiconductors from these designers and manufacturers. Our business also depends in part on worldwide economic conditions. Following the severe recession in the United States and in other key international economies that began during the fourth quarter of 2008, we began to see improvement in the demand environment for our products worldwide in the second half of 2009 that contributed to our strengthening revenue results.

        As we move into 2010, there continue to be areas of opportunity for our business. One of the most interesting is the projected growth of smart phones and other sophisticated Internet-connected devices, such as netbooks, that support more advanced features and access to new web-based applications and services. In addition to improving sales of these products, the benefit to AXT from the sales of more feature-rich, sophisticated devices is that they require a greater content of gallium arsenide in order to meet the speed and functionality requirements that consumers have come to expect. Even with the steep decline in spending associated with 2G legacy networks, carriers continue to invest in 3G, 3G+ and 4G in order to remain competitive and attract new subscribers. This network upgrade enables full performance capability of the video, gaming and Internet browsing capabilities of these next generation handsets and wireless devices and is driving increases in wireless subscribers in key geographic areas around the world as well as a compelling upgrade cycle for new devices. Since 2006, we have more than tripled our 6-inch gallium arsenide capacity in order to meet this increasing demand for our products and we plan to continue to expand as new qualifications and growing demand require greater production volume.

        The LED market is experiencing growth in a broad range of applications, such as backlighting, signage, general illumination and automotive. LED-based products are becoming increasingly common as the technology offers benefits in terms of cost, efficiency and performance over older technologies. AXT has historically focused its efforts in the high-end market and while we plan to continue to do so, we are also exploring opportunities to participate in the lower-end market as well. This market is geared today towards novelty products and is therefore very margin constrained. However, volumes are high and growing rapidly. In the future, we believe that this market will provide the entry into general illumination applications, as these applications will need lower cost LED devices in order to gain critical mass. Significant product development is underway from industry leaders to create affordable LED-based light bulbs and we believe it will be important to have a presence in this market as it develops.

        The concentrator photovoltaic (CPV) market for germanium is also continuing to grow, albeit from a smaller base. Growth in the global solar industry is expected in 2010 as there is increasing interest in the replacement of fossil fuel resources with sustainable alternatives such as solar power and solar modules and a renewed interest in renewable energy technology, particularly in the United States and Europe. At the same time, we believe that improvements in conversion efficiency for germanium are occurring, which we believe will enable this technology to become more affordable and therefore, more widely utilized, in the future.

4

---

Table of Contents

The AXT Advantage

        We believe that we benefit from the following advantages:

•

Low-cost manufacturing operation in the PRC.  Since 2004, we have manufactured all of our products in China, which generally has favorable costs for facilities and labor compared to comparable facilities in the United States or Europe. As of December 31, 2009, approximately 1,063 of our 1,091 employees (including employees at our consolidated joint ventures) are in China. Our primary competitors have their manufacturing operations in Germany or Japan.



•

Favorable access to raw materials.  Our joint ventures provide us favorable pricing, reliable supply and shorter lead-times for raw materials central to our final manufactured products. These materials include gallium, arsenic, germanium, germanium dioxide, paralytic boron nitride crucibles and boron oxide. As a result, we believe that our joint ventures will enable us to meet potential increases in demand from our customers by providing a more stable supply of raw materials at lower prices.



•

Flexible manufacturing infrastructure.  Our total manufacturing space in China is approximately 190,000 square feet, 160,000 square feet of which we currently use. We believe that our competitors typically purchase crystal growing furnaces from original equipment manufacturers. In contrast, we design and build our own VGF crystal growing furnaces, which we believe should allow us to increase our production capacity more quickly and cost effectively.

        Given these advantages, we believe that, when the worldwide economies begin to improves, the demand for compound semiconductor substrates may again increase. Once demand begins to recover, we believe that we are well-positioned to leverage our PRC-based manufacturing capabilities and access to favorably priced raw materials to begin to increase our market share.

Strategy

        Our goal is to become the leading worldwide supplier of high-performance compound and single element semiconductor substrates. Key elements of our strategy include:

        Continue to provide customers high and consistent quality products and service.    We seek to improve our manufacturing processes continually in order to meet and exceed our customers' high product quality standards, ensure on-time delivery of our products and optimize the cost of ownership. We expect to continue to improve our manufacturing processes in 2010 by adding some additional equipment, automating additional processes, and streamlining performance. In addition, we plan to continue to enhance our support functions, including service and applications engineering.

        Increase market share.    We intend to leverage our product quality, competitive pricing and lead times both to establish relationships with new customers and to increase our market share with current customers in the integrated circuits for wireless devices and HBLED markets. We also intend to explore opportunities to participate in the low-end LED market, where volumes are high and growing rapidly.

        Flexible capacity to meet customers' increasing demand for substrates.    Since 2006, we have tripled our 6-inch semi-insulating gallium arsenide substrate capacity in order to scale with increasing demand. As we enter 2010, we are seeing increasing demand for all sizes of our GaAs substrates and are reviewing our GaAs substrate capacity in order to make appropriate adjustments. In 2010 we expect to build out our remaining 30,000 sq ft production space in Beijing. We will also begin designing a new manufacturing building for future expansions.

        In 2009, we experienced a noticeable increase in demand for our Ge substrates due to improving economic conditions as well as new customer qualifications. As a result, we increased our Ge substrate

5

---

Table of Contents

capacity in the fourth quarter of 2009 and will closely follow future demand increases and adjust our production capacity accordingly.

        Establish leadership in emerging substrate applications.    We intend to expand our served markets by exploring new opportunities for our substrates and we continue to work with our customers to enhance our substrate product offering. For example in collaboration with a major satellite solar cell customer, we found that our VGF-grown Ge substrates had better surface quality and stronger mechanical strength than our competitor's Czochralski-grown Ge substrate. Better material quality can translate to better device performance and/or better yield for our customers. We are also working on the development of a 6" Ge substrate because the larger usable area in a 6-inch wafer over a 4-inch wafer will substantially reduce the cost of Ge solar cell manufacturing, which is essential for commercial adoption of Ge solar cell technology for terrestrial applications.

        Technology enhancements.    We continue to focus on technology development in the areas of VGF technology enhancement. We are working to increase the VGF ingot length and improve our single crystal yield rate. We also continue to improve our wafer processing technologies to give us better yield, lower production costs and better quality and performance for our customers.

Technology

        There are basically three technologies for crystal growth in our business: Vertical Gradient Freeze (VGF), Liquid Encapsulated Czochralski (LEC), and Czochralski (CZ). Our core technologies include our proprietary VGF technique used to produce high quality crystals that are processed into compound substrates, and the technologies of our joint venture companies, which enable us to manufacture a range of products that are used in the manufacture of compound semiconductor substrates or can be sold as raw materials to third parties.

        Our VGF technique is designed to control the crystal-growth process with minimal temperature variation and is the current technique we use to produce our GaAs, InP and Ge substrates. Unlike traditional techniques, our VGF technique places the hot compound melt above the cool crystal, and minimizes the temperature gradient between the crystal and the melt which reduces the turbulence at the interface of the melt and the solid crystal. In comparison, in the LEC technique the melt and crystal are inverted, there is a higher temperature gradient between the melt and the crystal, and more turbulence at the interface of the melt and solid crystal. These aspects of the VGF technique enable us to grow crystals that have a relatively low defect density and high uniformity. The crystal and the

6

---

Table of Contents

resulting substrate are mechanically strong, resulting in lower breakage rates during a customer's manufacturing process. Since the temperature gradient is controlled electronically rather than by physical movement, the sensitive crystal is not disturbed as it may be during some competitors' VGF-like growth processes. In addition, the melt and growing crystal are contained in a closed chamber, which isolates the crystal from the outside environment to reduce potential contamination. This substrate isolation allows for more precise control of the gallium-to-arsenic ratio, resulting in better consistency and uniformity of the crystals.

        Although we are exploring the use of other methods to control the crystal-growth process, including the CZ and LEC methods for select applications, for our traditional GaAs substrates, our VGF technique offers several benefits for producing our GaAs substrates when compared to traditional crystal growing technologies. The Horizontal Bridgman (HB) technique is the traditional method for producing semi-conducting GaAs substrates for opto-electronic applications, but because of the techniques used to hold the GaAs melt, the HB technique cannot be used cost-effectively to produce substrates greater than three inches in diameter. In addition, the HB technique houses the GaAs melt in a quartz container during the growth process, which can contaminate the GaAs melt with silicon impurities, making it unsuitable for producing semi-insulating GaAs substrates.

        Our VGF technique also offers advantages over the LEC technique for producing semi-insulating GaAs substrates for wireless applications. Unlike the VGF technique, the LEC technique can result in greater turbulence in the melt, and at a temperature gradient that is significantly higher than the VGF technique, which can cause LEC-grown crystals to have a higher dislocation density than VGF-grown crystals, resulting in a higher rate of breakage during the device manufacturing process. However, the LEC technique can be useful for GaAs semi-conducting substrates since the LED application specifications and requirements are less stringent than those of wireless applications.

Products

        We design, develop, manufacture and distribute high-performance semiconductor substrates. We make semi-insulating GaAs substrates used in applications such as amplifiers and switches for wireless devices, and semi-conducting GaAs substrates used to create opto-electronic products including HBLEDs, which are often used to backlight wireless handsets and LCD TVs and for automotive and general illumination applications. InP is a high performance semiconductor substrate used in broadband and fiber optic applications. Ge substrates are used in emerging applications such as triple junction solar cells for space and terrestrial photovoltaic applications and for optical applications.

        The table below sets forth our products and selected applications:

        Substrates.    We currently sell compound substrates manufactured from GaAs and InP, as well as single-element substrates manufactured from Ge. We supply GaAs substrates in two-, three-, four-, five-

7

---

Table of Contents

and six-inch diameters. We manufacture InP substrates in two-, three-and four-inch diameters, and Ge substrates in two- and four-inch diameters.

        Materials.    We participate in five joint ventures in China that sell raw materials used by us in substrate manufacturing and by others. These joint ventures produce products including 99.99% pure gallium (4N Ga), high purity gallium, arsenic, and germanium, germanium dioxide, paralytic boron nitride (pBN) crucibles, and boron oxide (B2O3). In 2009 and 2008, sales of raw materials by these joint ventures to third parties were approximately $6.4 million and $17.2 million, respectively.

        The primary costs of manufacturing compound semiconductor substrates are labor, raw materials and manufacturing equipment such as crystal growing furnaces. Accordingly, substrate manufacturers, including AXT, are continuing to shift production to larger wafers to reduce manufacturing costs.

Customers

        We sell our compound semiconductor substrates and materials worldwide. Our top revenue producing customers in 2009 by revenue were:

        Historically, we have sold a significant portion of our products in any particular period to a limited number of customers. IQE Group (IQE, Inc., IQE RF, LLC, IQE (Europe) Limited, MBE Technology Pte. Ltd.) represented 15% of our revenue for the year ended December 31, 2009. One customer represented greater than 10% of revenue for the year ended December 31, 2008, at 19%, and only one customer represented greater than 10% of revenue for the year ended December 31, 2007 at 12%. Our top five customers represented 41% of our revenue for the year ended December 31, 2009, 46% of our revenue for the year ended December 31, 2008, and 40% of our revenue for the year ended December 31, 2007. We expect that sales to a small number of customers will continue to comprise a significant portion of our revenue in the future.

        There were three third party customers for our raw materials that accounted for greater than 10% of revenue from raw materials sales at 18%, 13% and 11% for the year ended December 31, 2009, and two third party customers for our raw materials that accounted for greater than 10% of revenue from raw materials sales at 28% and 16% for the year ended December 31, 2008 and three third party customers for our raw materials that accounted for greater than 10% of revenue from raw materials sales at 22%, 14% and 13% for the year ended December 31, 2007. Our joint ventures are a key strategic benefit for us as they give us a strong competitive advantage of allowing our customers to work with one supplier for all their substrate and raw material requirements. Our raw materials customers include chemical companies; additionally, we sell raw materials to some of our competitors of our substrate business.

Manufacturing, Raw Materials and Supplies

        We believe that our operating results reflect our manufacturing efficiency and high product yields and we continually emphasize quality and process control throughout our manufacturing operations. We manufacture all of our products at our facilities in Beijing, China, which generally has favorable costs for facilities and labor compared to manufacturing in the United States. We believe that our capital

8

---

Table of Contents

investment and subsequent operating costs are lower for our manufacturing facilities in China relative to the U.S. Although some of our manufacturing operations are fully automated and computer monitored or controlled, enhancing reliability and yield, we expect to continue to improve our processes and increase the number of automated processes in 2010. We use proprietary equipment in our substrate manufacturing operations to protect our intellectual property and control the timing and pace of capacity additions. All of our manufacturing facilities are ISO 9001 or 9002 certified. In January 2006, our Beijing facility successfully passed the ISO 14001 certification audit.

        We have five joint ventures in China that provide us favorable pricing, reliable supply and shorter lead-times for raw materials central to our manufactured products including gallium, arsenic, germanium, germanium dioxide, pyrolitic boron nitride crucibles, and boron oxide. We believe that these joint ventures and investments will be advantageous in procuring materials to support our growth and cost management goals. In addition, we purchase supply parts, components and raw materials from several other domestic and international suppliers. We depend on a single or limited number of suppliers for certain critical materials used in the production of our substrates, such as quartz tubing, and polishing solutions. We generally purchase these materials through standard purchase orders and not pursuant to long-term supply contracts. Although we seek to maintain sufficient inventory levels of certain materials to guard against interruptions in supply and to meet our near term needs, and have to date been able to obtain sufficient supplies of materials in a timely manner in the future we may experience shortages of certain key materials, such as gallium.

        Our five joint ventures include three companies that are included in our consolidated financial statements as consolidated entities: Beijing JiYa Semiconductor Material Co., Ltd. (JiYa), Nanjing Jin Mei Gallium Co., Ltd. (Jin Mei), and Beijing BoYu Semiconductor Vessel Craftwork Technology Co., Ltd (BoYu). Our ownership in JiYa is 46%. We continue to consolidate JiYa as we have significant influence in management and have a majority control of the board. Our chief executive officer is chairman of the board, while our vice president of production, our China vice president of administration and our president of AXT China operations are also members of the board. Our ownership of Jin Mei is 83%. We continue to consolidate Jin Mei as we have significant influence in management and have a majority control of the board. Our chief executive officer is chairman of the board, while our China vice president of administration and our president of AXT China operations are also members of the board. We have significant influence over management of BoYu, have a controlling financial interest of 70%, and have a majority control of the board. Our chief executive officer is chairman of the board, while our China vice president of administration and our president of AXT China operations are also members of the board.

        Although we have representation on the boards of directors of each of these companies, the daily operations of each of these companies are managed by local management and not by us. Decisions concerning their respective short term strategy and operations, any capacity expansion and annual capital expenditures, and decisions concerning sales of finished product, are made by local management without input from us.

        JiYa is housed in and receives services from an affiliated aluminum plant and has in the past had to source finished products from another independent third party supplier in order to meet customer supply obligations when operations of its affiliated aluminum plant have been suspended or curtailed, resulting in a loss of supplies to the joint venture. In addition, even when capacity has been fully utilized, JiYa has had to source finished products from an independent third party supplier when demand has exceeded the joint venture's capacity, and will continue to source finished products from this independent third party supplier if it experiences supply shortages or if customer demand again exceeds its capacity.

        The investment balances for the other two joint ventures are accounted for under the equity method are included in other assets in the consolidated balance sheets and totaled $4.2 million and

9

---

Table of Contents

$3.7 million as of December 31, 2009 and 2008, respectively. We own 25% of the ownership interests in each of these companies.

Sales and Marketing

        We advertise in trade publications, distribute promotional materials, conduct marketing and sales programs, and participate in industry trade shows and conferences in order to raise market awareness of our products.

        We sell our substrate products directly to customers through our direct sales force in the U.S. and through independent sales representatives in France, Germany, Japan, South Korea, Taiwan and the United Kingdom. Our direct sales force is knowledgeable in the use of compound and single-element substrates. Our applications engineers work with customers during all stages of the substrate manufacturing process, from developing the precise composition of the substrate through manufacturing and processing the substrate to the customer's specifications. We believe that maintaining a close relationship with customers and providing them with ongoing engineering support improves customer satisfaction and will provide us with a competitive advantage in selling other substrates to our customers.

        International Sales.    International sales are an important part of our business. Sales to customers outside North America (primarily United States) accounted for 81% of our revenue in 2009, 74% of our revenue in 2008, and 80% of our revenue in 2007. The primary markets for sales of our substrate products outside of the United States are to customers located in Asia and Western Europe.

        We also sell through our joint ventures raw materials including 4N, 6N, and 7N gallium, boron oxide, germanium, arsenic, germanium dioxide, paralytic boron nitride crucibles used in crystal growth and parts for MBE (Molecular Beam Epitaxy). Our joint ventures are a key strategic benefit for us as they give us a strong competitive advantage of allowing our customers to work with one supplier for all their substrate and raw material requirements. Our joint ventures have their own separate sale forces where they also sell direct to their own customers in addition to their supply of raw materials to us.

Research and Development

        To maintain and improve our competitive position, we focus our research and development efforts on designing new proprietary processes and products, improving the performance of existing products and reducing manufacturing costs. We have assembled a multi-disciplinary team of skilled scientists, engineers and technicians to meet our research and development objectives.

        Our current substrate research and development activities focus on continued development and enhancement of GaAs, InP and Ge substrates, including haze reduction, improved yield, enhanced surface and electrical characteristics and uniformity, greater substrate strength and increased crystal length. During 2008 and 2009, we continued to focus research and development resources to reduce surface quality problems we experienced with our GaAs and InP substrates for some customers, particularly related to surface morphology. We continue to work on issues related to surface quality, and expect that research and development in this area will continue in 2010.

        Research and development expenses were $1.6 million in 2009, compared with $2.2 million in 2008 and $1.7 million in 2007. We expect our rate of expenditure on research and development costs in 2010 to increase as we continue to improve on processes and also develop 6" Ge wafers. Research and development at our joint ventures has been minimal.

Competition

        The semiconductor substrate industry is characterized by rapid technological change and price erosion, as well as intense foreign and domestic competition. We believe we currently have a leading

10

---

Table of Contents

position in the market for GaAs substrates for HBLED applications primarily as a result of our expertise in VGF technology, overall product quality, response times and prices. However, we face actual and potential competition from a number of established domestic and international companies who may have advantages not available to us including substantially greater financial, technical and marketing resources; greater name recognition; and more established relationships in the industry and may utilize these advantages to expand their product offerings more quickly, adapt to new or emerging technologies and changes in customer requirements more quickly, and devote greater resources to the marketing and sale of their products.

        We believe that the primary competitive factors in the markets in which our substrate products compete are:

•

quality;



•

price;



•

performance;



•

meeting customer specifications; and



•

customer support and satisfaction.

        Our ability to compete in target markets also depends on factors such as:

•

the timing and success of the development and introduction of new products and product features by us and our competitors;



•

the availability of adequate sources of raw materials;



•

protection of our products by effective use of intellectual property laws; and



•

general economic conditions.

        A compound semiconductor substrate customer typically has two or three substrates suppliers that it has qualified for the production of its products. These qualified suppliers must meet industry-standard specifications for quality, on-time delivery and customer support. Once a substrate supplier has qualified with a customer, price, consistent quality and current and future product delivery lead times become the most important competitive factors. A supplier that cannot meet customers' current lead times or that a customer perceives will not be able to meet future demand and provide consistent quality can lose current market share. Our primary competition in the market for compound semiconductor substrates includes China Crystal Technologies, Freiberger Compound Materials, Japan Energy, Mitsubishi Chemical Corporation, and Sumitomo Electric Industries. We believe that at least two of our competitors are shipping high volumes of GaAs substrates manufactured using a technique similar to our VGF technique. In addition, as a result of quality problems that we have experienced, we believe that some customers have allocated some of their requirements for VGF grown substrates across more competitors and we believe that we may have lost revenue and market share as a result of these customer decisions. In addition, we also face competition from compound semiconductor device manufacturers that produce substrates for their own internal use, including Hitachi, and from companies such as IBM that are actively developing alternative compound semiconductor materials.

        We are the only compound semiconductor substrate supplier to offer a full suite of raw materials and we believe that it gives us a strong competitive advantage in our marketplace.

Protection of our Intellectual Property

        Our success and the competitive position of our VGF technique depend on our ability to maintain trade secrets and other intellectual property protections. We rely on a combination of patents, trademark and trade secret laws, non-disclosure agreements and other intellectual property protection

11

---

Table of Contents

methods to protect our proprietary technology. We believe that, due to the rapid pace of technological innovation in the markets for our products, our ability to establish and maintain a position of technology leadership depends as much on the skills of our development personnel as upon the legal protections afforded our existing technologies. To protect our trade secrets, we take certain measures to ensure their secrecy, such as executing non-disclosure agreements with our employees, customers and suppliers. However, reliance on trade secrets is only an effective business practice insofar as trade secrets remain undisclosed and a proprietary product or process is not reverse engineered or independently developed.

        To date, we have been issued six patents that relate to our VGF products and processes, three (3) in the U.S., two (2) in Japan and one (1) in China, which expire in 2016 (1st U.S.), 2017 (1st JP), 2018 (CN), 2021 (2nd JP), 2022 (2nd U.S.), 2027 (3rd U.S.). We have eight (8) U.S. patent applications pending and nineteen (19) foreign patent applications pending (including applications in Patent Cooperation Treaty ("PCT") and national stage processes) in Europe, Canada, China, Japan and South Korea, which are based on our US patents and/or pertain to our VGF-related wafer manufacturing processes.

        In the normal course of business, we periodically receive and make inquiries regarding possible patent infringement. In dealing with such inquiries, it may become necessary or useful for us to obtain or grant licenses or other rights. However, there can be no assurance that such licenses or rights will be available to us on commercially reasonable terms. If we are not able to resolve or settle claims, obtain necessary licenses on commercially reasonable terms and/or successfully prosecute or defend our position, our business, financial condition and results of operations could be materially and adversely affected.

Environmental Regulations

        We are subject to federal, state and local environmental laws and regulations, including laws in China as well as the U.S. These laws, rules and regulations govern the use, storage, discharge and disposal of hazardous chemicals during manufacturing, research and development and sales demonstrations. We maintain a number of environmental, health and safety programs that are primarily preventive in nature. As part of these programs, we regularly monitor ongoing compliance. If we fail to comply with applicable regulations, we could be subject to substantial liability for clean-up efforts, personal injury and fines or suspension or cessation of our operations.

Employees

        As of December 31, 2009, we had 1,091 employees, of whom 867 were principally engaged in manufacturing, 131 in sales and administration, and 93 in research and development. Of these employees, 28 were located in the U.S., and 1,063 in China. As of December 31, 2008, we had 1,120 employees including employees of our consolidated joint ventures, of whom 902 were principally engaged in manufacturing, 125 in sales and administration, and 93 in research and development. Of these employees, 39 are located in the U.S., and 1,081 in China.

        Some of our employees in China are represented by a union, but we have never experienced a work stoppage. We consider our relations with our employees to be good.

Geographical Information

        Please see Note 14 of our Notes to Consolidated Financial Statements for information regarding our foreign operations, and see "Risks related to international aspects of our business" under Item 1A. Risk Factors for further information on risks attendant to our foreign operations and dependence.

12

---

Table of Contents

Available Information

        Our principal executive offices are located at 4281 Technology Drive, Fremont, CA 94538, and our main telephone number at this address is (510) 683-5900. The public may read and copy any material we file with the Securities and Exchange Commission, or SEC, at the SEC's Public Reference Room at 100 F Street, N.E., Washington D.C., 20549. The public may obtain information on the operations of the Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC maintains an Internet site http://www.sec.gov that contains reports, proxy and information statements and other information regarding issuers that file electronically with the SEC.

        Our web site is www.axt.com. We make available, free of charge, on or through our web site, our annual, quarterly and current reports, and any amendments to those reports as soon as reasonably practicable after those reports are filed with the SEC. The information on our web site does not constitute a part of this Annual Report on Form 10-K and is not incorporated herein.

13

---

Table of Contents

Item 1A.    Risk Factors

        For ease of reference, we have divided these risks and uncertainties into the following general categories:

•

Risks related to our general business;



•

Risks related to international aspects of our business;



•

Risks related to our financial results and capital structure;



•

Risks related to our intellectual property; and



•

Risks related to compliance and other legal matters.

Risks Related to Our General Business

Current global economic conditions may have an impact on our business and financial condition in ways that we currently cannot predict.

        Our operations and financial results depend on worldwide economic conditions and their impact on levels of business spending, which have deteriorated significantly in many countries and regions and may remain depressed for the foreseeable future. Uncertainties in the financial and credit markets have caused our customers to postpone deliveries of ordered systems and placement of new orders. Continued uncertainties may reduce future sales of our products and services. The revenue growth and profitability of our business depends on the overall demand for our substrates, and we are particularly dependent on the market conditions for the wireless, solid-state illumination, fiber optics and telecommunications industries. Because our sales are primarily to major corporate customers whose businesses fluctuate with general economic and business conditions, a softening of demand for products that use our substrates, caused by a weakening economy, may result in decreased revenue. Customers may find themselves facing excess inventory from earlier purchases, and may defer or reconsider purchasing products due to the downturn in their business and in the general economy. If the current market conditions continue to deteriorate, we may experience increased collection times and greater write-offs, either of which could have a material adverse effect on our cash flow.

        In addition, the tightening of credit markets and concerns regarding the availability of credit may make it more difficult for our customers to raise capital, whether debt or equity, to finance their purchases of capital equipment, including the products we sell. Delays in our customers' ability to obtain such financing, or the unavailability of such financing, would adversely affect our product sales and revenues and therefore harm our business and operating results. We cannot predict the timing, duration of or effect on our business of the economic slowdown or the timing or strength of a subsequent recovery.

Ongoing financial market volatility and adverse changes in the domestic and global economic environment could have a significant adverse impact on our business, financial condition and operating results.

        Our business and operating results have been significantly impacted by general economic conditions in 2008 and 2009, and we could experience significant adverse effects if there is any further decline in worldwide markets and overall economic difficulties. The U.S. and global economy has experienced a significant downturn due to the effects of the credit market crisis, slower economic activity and a generally negative economic outlook, a decrease in consumer and business confidence and liquidity concerns. Global market and economic conditions continue to be volatile. The possible duration and severity of this adverse economic cycle is unknown. Although the Company remains well-capitalized and has not suffered any liquidity issues as a result of these recent events, the cost and availability of funds may be adversely affected by illiquid credit markets. Continued turbulence in U.S. and international markets and economies may adversely affect the Company's liquidity, financial

14

---

Table of Contents

condition and profitability. Another severe or prolonged economic downturn could result in a variety of risks to our business, including:

•

increased volatility in our stock price;



•

increased volatility in foreign currency exchange rates;



•

delays in, or curtailment of, purchasing decisions by our customers or potential customers either as a result of overall economic uncertainty or as a result of their inability to access the liquidity necessary to engage in purchasing initiatives;



•

increased credit risk associated with our customers or potential customers, particularly those that may operate in industries most affected by the economic downturn, such as financial services; and



•

impairment of our intangible or other assets.

        We have experienced and expect to continue to experience delays in customer purchasing decisions or disruptions in normal volume of customer orders that we believe are in part due to the uncertainties in the global economy and an adverse impact on consumer spending. To the extent that the current economic downturn worsens or persists, or any of the above risks occur, our business and operating results could be significantly and adversely affected.

The average selling prices of our products may decline over relatively short periods, which may reduce our gross margins.

        The market for our products is characterized by declining average selling prices resulting from factors such as increased competition, overcapacity, the introduction of new products and decreased sales of products incorporating our products and average selling prices for our products may decline over relatively short time periods. We have in the past experienced, and in the future may experience, substantial period-to-period fluctuations in operating results due to declining average selling prices. On average, we have experienced average selling price declines over the course of the last twelve months of anywhere from approximately 5 to 20% per year depending on the product. It is also possible for the pace of average selling price declines to accelerate beyond these levels for certain products in a commoditizing market. We anticipate that average selling prices will decrease in the future in response to the current difficult economic environment, product introductions by competitors or us, or by other factors, including pricing pressures from significant customers. When our average selling prices decline, our gross profits decline unless we are able to sell more products or reduce the cost to manufacture our products. We generally attempt to combat average selling price declines by improving yields, manufacturing efficiency and working to reduce the costs of our raw materials and of manufacturing our products. We have in the past and may in the future experience declining sales prices, which could negatively impact our revenues, gross profits and financial results. We therefore need to sell our current products in increasing volumes to offset any decline in their average selling prices, and introduce new products, which we may not be able to do, or do on a timely basis.

        We may be unable to reduce the cost of our products sufficiently to enable us to compete with others. Our cost reduction efforts may not allow us to keep pace with competitive pricing pressures and could adversely affect our margins. In order to remain competitive, we must continually reduce the cost of manufacturing our products through design and engineering changes. We cannot assure you that any changes effected by us will result in sufficient cost reductions to allow us to reduce the price of our products to remain competitive or improve our gross margins.

15

---

Table of Contents

Shifts in our product mix may result in declines in gross margins.

        Our gross profit margins vary among our product families, and are generally higher on our larger diameter wafers. In addition, historically our gross margins have been higher on our raw materials sales. Accordingly, our overall gross margins have fluctuated from period to period as a result of shifts in product mix, the introduction of new products, decreases in average selling prices for products and our ability to reduce product costs, and these fluctuations are expected to continue in the future.

        We do not control the prices at which our joint venture companies sell their raw materials products to other third parties. However, as we consolidate the results of three of these companies with our own, any reduction in their gross margins could have a significant, adverse impact on our overall gross margins. One or more of our joint venture companies has in the past and may in the future sell raw materials at significantly reduced prices in order to gain volume sales, or sales to new customers. In such an event, our gross margin may be adversely impacted. In addition, one of our joint venture companies has in the past been subject to capacity constraints requiring it to source product from other third party suppliers in order to meet customer demand, resulting in decreased gross margin and adversely impacting our gross margin. This joint venture may in the future continue to experience such capacity restraints, causing our gross margin, and consequently our operating results, to be adversely impacted.

The cyclical nature of the semiconductor industry may limit our ability to maintain or increase net sales and operating results during industry downturns.

        The semiconductor industry is highly cyclical and periodically experiences significant economic downturns characterized by diminished product demand, resulting in production overcapacity and excess inventory in the markets we serve. A downturn can result in lower unit volumes and rapid erosion of average selling prices. The semiconductor industry has experienced significant downturns, often in connection with, or in anticipation of, maturing product cycles of both semiconductor companies' and their customers' products or a decline in general economic conditions. We have experienced these conditions in our business in the past, including most recently in 2009, and may experience renewed, and possibly more severe and prolonged, downturns in the future as a result of such cyclical changes. This may reduce our results of operations and the value of our business.

        Our continuing business depends in significant part upon manufacturers of electronic and opto-electronic compound semiconductor devices, as well as the current and anticipated market demand for these devices and products using these devices. As a supplier to the compound semiconductor industry, we are subject to the business cycles that characterize the industry. The timing, length and volatility of these cycles are difficult to predict. The compound semiconductor industry has historically been cyclical because of sudden changes in demand, the amount of manufacturing capacity and changes in the technology employed in compound semiconductors. The rate of changes in demand, including end demand, is high, and the effect of these changes upon us occurs quickly, exacerbating the volatility of these cycles. These changes have affected the timing and amounts of customers' purchases and investments in new technology. These industry cycles create pressure on our revenue, gross margin and net income (loss).

        The industry has in the past experienced periods of oversupply that result in significantly reduced demand and prices for compound semiconductor devices and components, including our products, both as a result of general economic changes and overcapacity. When these periods occur and our operating results and financial condition are adversely affected, oversupply creates pressure on our revenue, gross margins and net income (loss). Inventory buildups in telecommunications products and slower than expected sales of computer equipment resulted in overcapacity and led to reduced sales by our customers, and therefore reduced purchases of our products. During periods of weak demand such as those experienced historically, customers typically reduce purchases, delay delivery of products and/or

16

---

Table of Contents

cancel orders of component parts such as our products. Increased price competition has resulted, causing pressure on our net sales, gross margin and net income (loss). We experienced cancellations, price reductions, delays and push-outs of orders, which have resulted in reduced revenue. If the economic downturn continues, further order cancellations, reductions in order size or delays in orders could occur and would materially adversely affect our business and results of operations. Actions to reduce our costs, such as those we have recently taken, may be insufficient to align our structure with prevailing business conditions. We may be required to undertake additional cost-cutting measures, and may be unable to invest in marketing, research and development and engineering at the levels we believe are necessary to maintain our competitive position. Our failure to make these investments could seriously harm our business.

        We base our planned operating expenses in part on our expectations of future revenue, and a significant portion of our expenses is relatively fixed in the short term. If revenue for a particular quarter is lower than we expect, we likely will be unable to proportionately reduce our operating expenses for that quarter, which would harm our operating results for that quarter.

We depend on high utilization of our manufacturing capacity.

        An important factor in our success is the extent to which we are able to utilize the available capacity in our Beijing facility. As many of our costs are fixed, a reduction in capacity utilization, as well as changes in other factors such as reduced yield or unfavorable product mix, could reduce our profit margins and adversely affect our operating results. A number of factors and circumstances may reduce utilization rates, including periods of industry overcapacity, low levels of customer orders, operating inefficiencies, mechanical failures and disruption of operations due to expansion, power interruptions, fire, flood or other natural disasters or calamities.

The Chinese Government has previously imposed manufacturing restrictions that, if imposed again in the future on our facilities, could materially and adversely impact our results of operations and our financial condition.

        The Chinese government has in the past imposed restrictions on manufacturing facilities, such as the restrictions imposed on polluting factories for the 2008 Olympics and Paralympics, including a shut down of material transportation and power plants to clean the air. If, in the future, restrictions are imposed on our operations, our ability to meet customer demand or supply current or new orders would be significantly impacted. Customers could then be required to purchase product from our competitors, causing our competitors to take market share from us, and could result in our customers supplying future needs from our competitors. Restrictions on material transport could limit our ability to transport our product, and could result in bottlenecks at shipping ports, limiting our ability to deliver products to our customers. During periods of such restrictions, we may increase our stock of critical materials (such as arsenic, gallium, and other chemicals) for use during the period that these restrictions are likely to last, which will increase our use of cash and increase in inventory level, such as occurred during 2008. Any of these restrictions could materially and adversely impact our results of operations and our financial condition.

Defects in our products could diminish demand for our products.

        Our products are complex and may contain defects. We have experienced quality control problems with many of our products, which caused customers to return products to us, reduce orders for our products, or both. Although our quality has improved, resulting in some increases in product sales, we believe that we continue to experience some reduction in orders as a result of our prior product quality problems. If we continue to experience quality control problems, or experience these or other problems in new products, customers may cancel or reduce orders or purchase products from our competitors, we may be unable to maintain or increase sales to our customers and sales of our products could

17

---

Table of Contents

decline. Defects in our products could cause us to incur higher manufacturing costs and suffer product returns and additional service expenses, all of which could adversely impact our operating results.

        If new products developed by us contain defects when released, our customers may be dissatisfied and we may suffer negative publicity or customer claims against us, lose sales or experience delays in market acceptance of our new products.

The loss of one or more of our key substrate customers would significantly hurt our operating results.

        A small number of substrate customers have historically accounted for a substantial portion of our total revenue. Our top five customers represented 41% of revenue for the year ended December 31, 2009, 46% of revenue for the year ended December 31, 2008, and 40% of revenue for the year ended December 31, 2007. We expect that a significant portion of our future revenue will continue to be derived from a limited number of substrate customers. Most of our customers are not obligated to purchase a specified quantity of our products or to provide us with binding forecasts of product purchases. In addition, our customers may reduce, delay or cancel orders at any time without any significant penalty. In the past, we have experienced slower bookings, significant push-outs and cancellation of orders from customers. If we lose a major customer or if a customer cancels, reduces or delays orders, our revenue would decline. In addition, customers that have accounted for significant revenue in the past may not continue to generate revenue for us in any future period. Any delay in scheduled shipments of our products could cause revenue to fall below our expectations and the expectations of market analysts or investors, causing our stock price to decline.

Our results of operations may suffer if we do not effectively manage our inventory.

        We must manage our inventory of component parts, work-in-process and finished goods effectively to meet changing customer requirements, while keeping inventory costs down and improving gross margins. Some of our products and supplies have in the past and may in the future become obsolete while in inventory due to changing customer specifications, or become excess inventory due to decreased demand for our products and an inability to sell the inventory within a foreseeable period. Furthermore, if current costs of production increase or sales prices drop below the standard prices at which we value inventory, we may need to take a charge for a reduction in inventory values. We have in the past had to take inventory valuation and impairment charges. Any future unexpected changes in demand or increases in costs of production that cause us to take additional charges for un-saleable, obsolete or excess inventory, or to reduce inventory values, could adversely affect our results of operations.

If we have low product yields, the shipment of our products may be delayed and our operating results may be adversely impacted.

        Our products are manufactured using complex technologies, and the number of usable substrates we produce can fluctuate as a result of many factors, including:

•

impurities in the materials used;



•

contamination of the manufacturing environment;



•

substrate breakage;



•

equipment failure, power outages or variations in the manufacturing process; and



•

performance of personnel involved in the manufacturing process.

        If our yields decrease, our revenue could decline if we are unable to produce needed product on time. At the same time, our manufacturing costs could remain fixed, or could increase. We have experienced product shipment delays and difficulties in achieving acceptable yields on both new and

18

---

Table of Contents

older products, and delays and poor yields have adversely affected our operating results. We may experience similar problems in the future and we cannot predict when they may occur or their severity. In particular, many of our manufacturing processes are new and are still being refined, which can result in lower yields.

        If our manufacturing processes result in defects in our products making them unfit for use by our customers, our products would be rejected, resulting in compensation costs paid to our customers, and possible disqualification. This could lead to revenue loss and market share loss.

If we do not successfully develop new products to respond to rapidly changing customer requirements, our ability to generate revenue, obtain new customers, and retain existing customers may suffer.

        Our success depends on our ability to offer new products and product features that incorporate leading technology and respond to technological advances. In addition, our new products must meet customer needs and compete effectively on quality, price and performance. The life cycles of our products are difficult to predict because the markets for our products are characterized by rapid technological change, changing customer needs and evolving industry standards. If our competitors introduce products employing new technologies or performance characteristics, our existing products could become obsolete and unmarketable. During the past three years, we have seen our competitors selling more substrates manufactured using a crystal growth technology similar to ours, which has eroded our technological differentiation. Other companies, including TriQuint Semiconductors, are actively developing substrate materials that could be used to manufacture devices that could provide the same high-performance, low-power capabilities as GaAs- and InP-based devices at competitive prices. If these substrate materials or VGF-derived products are successfully developed and semiconductor device manufacturers adopt them, demand for our GaAs substrates could decline and our revenue could suffer.

        The development of new products can be a highly complex process, and we may experience delays in developing and introducing new products. Any significant delays could cause us to fail to timely introduce and gain market acceptance of new products. Further, the costs involved in researching, developing and engineering new products could be greater than anticipated. If we fail to offer new products or product enhancements or fail to achieve higher quality products, we may not generate sufficient revenue to offset our development costs and other expenses or meet our customers' requirements.

Intense competition in the markets for our products could prevent us from increasing revenue and sustaining profitability.

        The markets for our products are intensely competitive. We face competition for our substrate products from other manufacturers of substrates, such as Freiberger Compound Materials, Hitachi Cable and Sumitomo Electric, from semiconductor device manufacturers that produce substrates for their own use, and from companies, such as TriQuint Semiconductors, that are actively developing alternative materials to GaAs and marketing semiconductor devices using these alternative materials. We believe that at least two of our major competitors are shipping high volumes of GaAs substrates manufactured using a technique similar to our VGF technique. Other competitors may develop and begin using similar technology. If we are unable to compete effectively, our revenue may not increase and we may be unable to remain profitable on a quarterly basis. We face many competitors that have a number of significant advantages over us, including:

•

greater experience in the business;



•

more manufacturing experience;



•

extensive intellectual property;

19

---

Table of Contents

•

broader name recognition; and



•

significantly greater financial, technical and marketing resources.

        Our competitors could develop new or enhanced products that are more effective than our products are.

        The level and intensity of competition has increased over the past year and we expect competition to continue to increase in the future. Competitive pressures caused by the current economic conditions have resulted in reductions in the prices of our products, and continued or increased competition could reduce our market share, require us to further reduce the prices of our products, affect our ability to recover costs and result in reduced gross margins.

        In addition, new competitors have and may continue to emerge, such as a small crystal growing company established by a former employee of ours in China that is supplying ingots to the market. While new competitors such as this company currently do not appear to be fully competitive, competition from sources such as this could increase, particularly if these competitors are able to obtain large capital investments.

Demand for our products may decrease if our customers experience difficulty manufacturing, marketing or selling their products.

        Our products are used as components in our customers' products. Accordingly, demand for our products is subject to factors affecting the ability of our customers to introduce and market their products successfully, including:

•

the competition our customers face in their particular industries;



•

the technical, manufacturing, sales and marketing and management capabilities of our customers;



•

the financial and other resources of our customers; and



•

the inability of our customers to sell their products if they infringe third-party intellectual property rights.

        If demand for the end-user applications for which our products are used decreases, or our customers are unable to develop, market and sell their products, demand for our products will decrease.

The financial condition of our customers may affect their ability to pay amounts owed to us.

        Many of our customers are facing business downturns that have reduced their cash balances and their prospects. We frequently allow our customers extended payment terms after shipping products to them. Subsequent to our shipping a product, some customers have been unable to make payments when due, reducing our cash balances and causing us to incur charges to allow for a possibility that some accounts might not be paid. Customers may also be forced to file for bankruptcy. If our customers do not pay their accounts when due, we will be required to incur charges that would reduce our earnings.

We purchase critical raw materials and parts for our equipment from single or limited sources, and could lose sales if these sources fail to fill our needs.

        We depend on a limited number of suppliers for certain raw materials, components and equipment used in manufacturing our products, including key materials such as quartz tubing, polishing solutions and paralytic boron nitride. Although several of these raw materials are purchased from suppliers in which we hold an ownership interest, we generally purchase these materials through standard purchase

20

---

Table of Contents

orders and not pursuant to long-term supply contracts and no supplier guarantees supply of raw materials or equipment to us. If we lose any of our key suppliers, our manufacturing efforts could be significantly hampered and we could be prevented from timely producing and delivering products to our customers. Prior to investing in our raw material joint ventures, we sometimes experienced delays obtaining critical raw materials and spare parts, including gallium, due to shortages of these materials and could experience such delays again in the future due to shortages of materials and may be unable to obtain an adequate supply of materials. These shortages and delays could result in higher materials costs and cause us to delay or reduce production of our products. If we have to delay or reduce production, we could fail to meet customer delivery schedules and our revenue and operating results could suffer.

We have made and may continue to make strategic investments in raw materials suppliers, which may not be successful and may result in the loss of all or part of our investment.

        We have made investments through our five joint ventures in raw material suppliers in China, which provide us with opportunities to gain supplies of key raw materials that are important to our substrate business. These affiliates each have a market beyond that provided by us. We do not have influence over all of these companies, each of which is located in China, and in some we have made only a strategic, minority investment. We may not be successful in achieving the financial, technological or commercial advantage upon which any given investment is premised, and we could end up losing all or part of our investment.

Our substrate products have a long qualification cycle that makes it difficult to plan our expenses and forecast our results.

        Customers typically place orders with us for our substrate products three months to a year or more after our initial contact with them. The sale of our products may be subject to delays due to our customers' lengthy internal budgeting, approval and evaluation processes. During this time, we may incur substantial expenses and expend sales, marketing and management efforts while the customers evaluate our products. These expenditures may not result in sales of our products. If we do not achieve anticipated sales in a period as expected, we may experience an unplanned shortfall in our revenue. As a result, we may not be able to cover expenses, causing our operating results to vary. In addition, if a customer decides not to incorporate our products into its initial design, we may not have another opportunity to sell products to this customer for many months or even years. In the current competitive and economic climate, the average sales cycle for our products has lengthened even further and is expected to continue to make it difficult to forecast our future sales accurately. We anticipate that sales of any future substrate products will also have lengthy sales cycles and will, therefore, be subject to risks substantially similar to those inherent in the lengthy sales cycles of our current substrate products.

Problems incurred by our joint ventures or venture partners could result in a material adverse impact on our financial condition or results of operations.

        We have invested in five joint venture operations in China that produce products including 99.99% pure gallium (4N Ga), high purity gallium, arsenic, germanium, germanium dioxide, paralytic boron nitride (pBN) crucibles and boron oxide. We purchase a portion of the materials produced by these ventures for our use and sell the remainder of their production to third parties. Our ownership interest in these entities ranges from 25% to 83%. We consolidate the three joint ventures in which we own a majority or controlling financial interest and employ equity accounting for the two joint ventures in which we have a 25% interest. Several of these ventures occupy space within larger facilities owned and/or operated by one of the other venture partners. Several of these venture partners are engaged in other manufacturing activities at or near the same facility. In some facilities, we share access to certain functions, including water, hazardous waste treatment or air quality treatment. If any of our joint

21

---

Table of Contents

venture partners in any of these five ventures experiences problems with its operations, disruptions of our joint venture operations could result, having a material adverse effect on the financial condition and results of operation of our joint ventures, and correspondingly on our financial condition or results of operations. For example, during 2008, our gallium joint venture in China, which is housed in and receives services from an affiliated aluminum plant, ceased production for five weeks during the fourth quarter of 2008 as a result of supply shortage from the aluminum plant which had reduced production and halted operations due to dropping aluminum prices in the second half of 2008. Accordingly, in order to meet customer supply obligations, our joint venture had to source finished products from another independent third party supplier, resulting in low gross margin for the quarter. Our joint venture may in the future continue to experience shortages in supply from the aluminum plant, requiring it to again source finished products from a third party, adversely impacting our gross margins.

        In addition, if any of our joint ventures or venture partners with which our joint ventures share facilities is deemed to have violated applicable laws, rules or regulations governing the use, storage, discharge or disposal of hazardous chemicals during manufacturing, research and development, or sales demonstrations, the operations of our joint ventures could be adversely affected and we could be subject to substantial liability for clean-up efforts, personal injury and fines or suspension or cessation of our joint venture operations as a result of the actions of the joint ventures or other venture partners. Employees working for our joint ventures or any of the other venture partners could bring litigation against us as a result of actions taken at the joint venture or venture partner facilities, even though we are not directly controlling the operations, including actions for exposure to chemicals or other hazardous materials at the facilities of our joint ventures or the facilities of any venture partner that are shared by our joint ventures. While we would expect to defend ourselves vigorously in any litigation that is brought against us, litigation is inherently uncertain and it is possible that our business, financial condition, results of operations or cash flows could be affected. Even if we are not deemed responsible for the actions of the joint ventures or venture partners, litigation could be costly, time consuming to defend and divert management attention; in addition, pursuit of us could occur if we are deemed to be the most financially viable of the partners.

        Going forward, we believe that investing in additional joint ventures will be important to remaining competitive in our marketplace and ensuring a supply of critical raw materials. However, we may not be able to identify complementary joint venture opportunities or, even once opportunities are identified, we may not be able to reach agreement on the terms of the venture with the other venture partners. Additional joint ventures could cause us to incur contingent liabilities or other expenses, any of which could adversely affect our financial condition and operating results.

        Since all of our joint venture activity is expected to occur in China, these activities could subject us to a number of risks associated with conducting operations internationally, including:

•

difficulties in managing geographically disparate operations;



•

difficulties in enforcing agreements through non-U.S. legal systems;



•

unexpected changes in regulatory requirements that may limit our ability to export the venture products or sell into particular jurisdictions or impose multiple conflicting tax laws and regulations;



•

political and economic instability, civil unrest or war;



•

terrorist activities that impact international commerce;



•

difficulties in protecting our intellectual property rights, particularly in countries where the laws and practices do not protect proprietary rights to as great an extent as do the laws and practices of the United States;

22

---

Table of Contents

•

changing laws and policies affecting economic liberalization, foreign investment, currency convertibility or exchange rates, taxation or employment; and



•

nationalization of foreign-owned assets, including intellectual property.

The effect of terrorist threats and actions on the general economy could decrease our revenue.

        The United States continues to be on alert for terrorist activity. The potential near- and long-term impact terrorist activities may have in regards to our suppliers, customers and markets for our products and the U.S. economy is uncertain. There may be embargos of ports or products, or destruction of shipments or our facilities, or attacks that affect our personnel. There may be other potentially adverse effects on our operating results due to a significant event that we cannot foresee. Since we perform all of our manufacturing operations in China, and a significant portion of our customers are located outside of the United States, terrorist activity or threats against U.S.-owned enterprise are a particular concern to us.

If any of our facilities is damaged by occurrences such as fire, explosion, or natural disaster, we might not be able to manufacture our products.

        The ongoing operation of our manufacturing and production facilities in China is critical to our ability to meet demand for our products. If we are not able to use all or a significant portion of our facilities for prolonged periods for any reason, we would not be able to manufacture products for our customers. For example, a fire or explosion caused by our use of combustible chemicals and high temperatures during our manufacturing processes could render some or all of our facilities inoperable for an indefinite period of time. Actions outside of our control, such as earthquakes or other natural disasters, could also damage our facilities, rendering them inoperable. If we are unable to operate our facilities and manufacture our products, we would lose customers and revenue and our business would be harmed.

Risks Related to International Aspects of Our Business

Changes in tariffs, import restrictions, export restrictions or other trade barriers may reduce gross margins.

        We may incur increases in costs due to changes in tariffs, import or export restrictions, or other trade barriers, or unexpected changes in regulatory requirements, any of which could reduce our gross margins. For example, in 2006, tax authorities in the PRC changed the treatment of refunds of value-added taxes that companies pay when they purchase certain raw materials, including gallium and arsenic. The cumulative effect is that our PRC joint venture companies no longer receive a refund of value-added tax for exports of gallium or arsenic, including certain shipments to our wholly-owned PRC subsidiary that are treated as exports under PRC tax regulations. Given the relatively fluid regulatory environment in the PRC, there could be additional tax or other regulatory changes in the future. Any such changes could directly and materially adversely impact our financial results and general business condition.

Our operating results depend in large part on continued customer acceptance of our substrate products manufactured in China and continued improvements in product quality.

        We manufacture all of our products in China, and source most of our raw materials in China. Accordingly, we continue to seek customer qualification of our China-manufactured products. In addition, we have in the past experienced quality problems with our China-manufactured products. Our previous quality problems caused us to lose market share to our competitors, as some customers reduced their orders from us until our surface quality was as good and consistent as that offered by competitors and customers allocated their requirements for compound semiconductor substrates across more competitors. We have continued to experience some issues relating to haze reduction. If we are

23

---

Table of Contents

unable to continue to achieve customer qualifications for our products, or if continue to experience quality problems, customers may not increase purchases of our products, our China facility will become underutilized, and we will be unable to achieve expected revenue growth. We may again lose sales of our products to competitors and experience loss of market share. If we are unable to recover and retain our market share, we may be unable to grow our business.

We derive a significant portion of our revenue from international sales, and our ability to sustain and increase our international sales involves significant risks.

        Our revenue growth depends in part on the expansion of our international sales and operations. International sales represented 81%, 74% and 80% of our total revenue for the years ended December 31, 2009, 2008 and 2007, respectively. We expect that sales to customers outside the U.S., particularly sales to customers in Asia, will continue to represent a significant portion of our revenue.

        Currently, an increasing percentage of our sales is to customers headquartered in Asia. All of our manufacturing facilities and some of our suppliers are also located outside the U.S. Managing our overseas operations presents challenges, including periodic regional economic downturns, trade balance issues, varying business conditions and demands, political instability, variations in enforcement of intellectual property and contract rights in different jurisdictions, differences in the ability to develop relationships with suppliers and other local businesses, changes in U.S. and international laws and regulations including U.S. export restrictions, fluctuations in interest and currency exchange rates, the ability to provide sufficient levels of technical support in different locations, cultural differences, shipping delays and terrorist acts or acts of war, among other risks. Many of these challenges are present in China, which represents a large potential market for semiconductor devices and where we anticipate significant opportunity for growth. Global uncertainties with respect to: (i) economic growth rates in various countries; (ii) sustainability of demand for electronics products; (iii) capital spending by semiconductor manufacturers; (iv) price weakness for certain semiconductor devices; and (v) political instability in regions where we have operations may also affect our business, financial condition and results of operations.

        Our dependence on international sales involves a number of risks, including:

•

changes in tariffs, import restrictions, export restrictions, or other trade barriers;



•

unexpected changes in regulatory requirements;



•

longer periods to collect accounts receivable;



•

changes in export license requirements;



•

political and economic instability;



•

unexpected changes in diplomatic and trade relationships; and



•

foreign exchange rate fluctuations.

        Our sales are denominated in U.S. dollars, except for sales to our Japanese and some Taiwanese customers, which are denominated in Japanese yen. Thus, increases in the value of the U.S. dollar could increase the price of our products in non-U.S. markets and make our products more expensive than competitors' products in these markets.

        Also, denominating some sales in Japanese yen subjects us to fluctuations in the exchange rates between the U.S. dollar and the Japanese yen. The functional currency of our Chinese subsidiary and joint ventures is the local currency. We incur transaction gains or losses resulting from consolidation of expenses incurred in local currencies for these entities, as well as in translation of the assets and liabilities of their assets at each balance sheet date. If we do not effectively manage the risks associated with international sales, our revenue, cash flows and financial condition could be adversely affected.

24

---

Table of Contents

If there are power shortages in the PRC, we may have to temporarily close our China operations, which would adversely impact our ability to manufacture our products and meet customer orders, and would result in reduced revenue.

        In the past, the Chinese government has faced a power shortage resulting in power demand outstripping supply in peak periods. Instability in electrical supply in past years has caused sporadic outages among residential and commercial consumers causing the Chinese government to implement tough measures to ease the energy shortage, and as a result, we closed most of our operations for a week in late July 2004 in conformance with this policy.

        In 2006 we were able to switch the electrical supply for our manufacturing facility onto the same power grid as that used by vital PRC government services such as hospitals and police. However, if even despite this switch, further problems with power shortages occur in the future, and we are required to make temporary closures of our subsidiary and joint venture operations, we may be unable to manufacture our products, and would then be unable to meet customer orders except from inventory on hand. As a result, our revenue could be adversely impacted, and our relationships with our customers could suffer, impacting our ability to generate future revenue. In addition, if power is shut off at our Beijing subsidiary at any time, either voluntarily or as a result of unplanned brownouts, during certain phases of our manufacturing process including our crystal growth phase, the work in process may be ruined and rendered unusable, causing us to incur expense that will not be covered by revenue, and negatively impacting our cost of revenue and gross margins.

Changes in China's political, social and economic environment may affect our financial performance.

        Our financial performance may be affected by changes in China's political, social and economic environment. The role of the Chinese central and local governments in the Chinese economy is significant. Chinese policies toward economic liberalization, and laws and policies affecting technology companies, foreign investment, currency exchange rates and other matters could change, resulting in greater restrictions on our ability to do business and operate our manufacturing facilities in China. Any imposition of surcharges or any increase in Chinese tax rates or reduction or elimination of Chinese tax benefits could hurt our operating results. The Chinese government could revoke, terminate or suspend our license for national security and similar reasons without compensation to us. If the government of China were to take any of these actions, we would be prevented from conducting all or part of our business. Any failure on our part to comply with governmental regulations could result in the loss of our ability to manufacture our products in China.

An outbreak of contagious disease such as Severe Acute Respiratory Syndrome (SARS) or the Avian Flu may adversely impact our manufacturing operations and some of our key suppliers and customers.

        Any reoccurrence of SARS or an outbreak of a contagious disease, such as Avian Flu may cause us to temporarily close our manufacturing operations. Similarly, if one of our key suppliers is required to close for an extended period, we might not have enough raw material inventory to continue manufacturing operations. In addition, while we possess management skills among our China staff that enable us to maintain our manufacturing operations with minimal on-site supervision from our U.S.-based staff, our business could also be harmed if travel to or from Asia and the United States is restricted or inadvisable. None of our substrate competitors is as dependent on manufacturing facilities in China as we are. If our manufacturing operations were closed for a significant period, we could lose revenue and market share during that period, which would depress our financial performance and could be difficult to recapture. Finally, if one of our key customers is required to close for an extended period, we might not be able to ship product to them, our revenue would decline and our financial performance would suffer.

25

---

Table of Contents

Risks Related to Our Financial Results and Capital Structure

Our common stock may be delisted from The Nasdaq Global Market, which could negatively impact the price of our common stock and our ability to access the capital markets.

        Our common stock is listed on The Nasdaq Global Market. The bid price of our common stock has recently closed below the $1.00 minimum per share bid price required for continued inclusion on The Nasdaq Global Market under Marketplace Rule 5450(a). If the bid price of our common stock remains below $1.00 per share for thirty consecutive business days, we could be subject to delisting from the Nasdaq Global Market.

        Any delisting from The Nasdaq Global Market could have an adverse effect on our business and on the trading of our common stock. If a delisting of our common stock were to occur, our common stock would trade on the OTC Bulletin Board or on the "pink sheets" maintained by the National Quotation Bureau, Inc. Such alternatives are generally considered to be less efficient markets, and our stock price, as well as the liquidity of our common stock, may be adversely impacted as a result. Delisting from The Nasdaq Global Market could also have other negative results, including the potential loss of confidence by suppliers and employees, the loss of institutional investor interest and fewer business development opportunities, as well as the loss of liquidity for our stockholders.

If we fail to manage periodic contractions, we may utilize our cash balances, resulting in the decline of our existing cash, cash equivalents and investment balances.

        We anticipate that our existing cash resources will fund our operations and purchases of capital equipment, as well as provide adequate working capital for the next twelve months. However, our liquidity is affected by many factors including, among others, the extent to which we pursue additional capital expenditures, the level of our production, and other factors related to the uncertainties of the industry and global economies. If we fail to manage our contractions successfully we may draw down our cash reserves, which would adversely affect our operating results and financial condition, reduce our value and possibly impinge our ability to raise debt and equity funding in the future, at a time when we might be required to raise additional cash. Accordingly, there can be no assurance that events in the future will not require us to seek additional capital or, if required, that such capital would be available on terms acceptable to us, if at all. As part of our effort to reduce costs, we may lose key staff, production resources and technology that we will need to grow when end markets recover. These events could reduce our ability to grow profitably as markets recover.

Unpredictable fluctuations in our operating results could disappoint analysts or our investors, which could cause our stock price to decline.

        We have experienced and may continue to experience significant fluctuations in our revenue and earnings. Our quarterly and annual revenue and operating results have varied significantly in the past and may vary significantly in the future due to a number of factors, including:

•

our ability to develop, manufacture and deliver high quality products in a timely and cost-effective manner;



•

decline in general economic conditions or downturns in the industry in which we compete;



•

fluctuations in demand for our products;



•

expansion of our manufacturing capacity;



•

expansion of our operations in China;



•

limited availability and increased cost of raw materials;

26

---

Table of Contents

•

the volume and timing of orders from our customers, and cancellations, push-outs and delays of customer orders once made;



•

fluctuation of our manufacturing yields;



•

decreases in the prices of our or our competitors' products;



•

costs incurred in connection with any future acquisitions of businesses or technologies; and



•

increases in our expenses, including expenses for research and development.

        Due to these factors, we believe that period-to-period comparisons of our operating results may not be meaningful indicators of our future performance.

        A substantial percentage of our operating expenses are fixed in the short term, and we may be unable to adjust spending to compensate for an unexpected shortfall in revenue. As a result, any delay in generating revenue could cause our operating results to be below the expectations of market analysts or investors, which could also cause our stock price to fall.

We have adopted certain anti-takeover measures that may make it more difficult for a third party to acquire us.

        Our board of directors has the authority to issue up to 2,000,000 shares of preferred stock and to determine the price, rights, preferences and privileges of those shares without any further vote or action by the stockholders. The rights of the holders of common stock will be subject to, and may be adversely affected by, the rights of the holders of any preferred stock that may be issued in the future. The issuance of shares of preferred stock could have the effect of making it more difficult for a third party to acquire a majority of our outstanding voting stock. We have no present intention to issue additional shares of preferred stock.

        We have adopted a preferred stock purchase rights plan intended to guard against certain takeover tactics. The adoption of this plan was not in response to any proposal to acquire us, and the board is not aware of any such effort. The existence of this plan could also have the effect of making it more difficult for a third party to acquire a majority of our outstanding voting stock.

        In addition, provisions in our amended and restated certificate of incorporation and amended and restated bylaws may have the effect of delaying or preventing a merger, acquisition or change of control, or changes in our management, which could adversely affect the market price of our common stock. The following are some examples of these provisions:

•

the division of our board of directors into three separate classes, each with three-year terms;



•

the right of our board to elect a director to fill a space created by a board vacancy or the expansion of the board;



•

the ability of our board to alter our amended and restated bylaws; and



•

the requirement that only our board or the holders of at least 10% of our outstanding shares may call a special meeting of our stockholders.

        Furthermore, because we are incorporated in Delaware, we are subject to the provisions of Section 203 of the Delaware General Corporation Law. These provisions prohibit us from engaging in any business combination with any interested stockholder (a stockholder who owns 15% or more of our outstanding voting stock) for a period of three years following the time that such stockholder became an interested stockholder, unless:

•

66²/3% of the shares of voting stock not owned by the interested stockholder approve the merger or combination, or

27

---

Table of Contents

•

the board of directors approves the merger or combination or the transaction which resulted in the stockholder becoming an interested stockholder.

Risks Related to Our Intellectual Property

Intellectual property infringement claims may be costly to resolve and could divert management attention.

        Other companies may hold or obtain patents on inventions or may otherwise claim proprietary rights to technology necessary to our business. The markets in which we compete are comprised of competitors that in some cases hold substantial patent portfolios covering aspects of products that could be similar to ours. We could become subject to claims that we are infringing patent, trademark, copyright or other proprietary rights of others. For example, we have in the past been involved in two separate lawsuits alleging patent infringement, and could in the future be involved in similar litigation.

If we are unable to protect our intellectual property, we may lose valuable assets or incur costly litigation.

        We rely on a combination of patents, copyrights, trademark and trade secret laws, non-disclosure agreements and other intellectual property protection methods to protect our proprietary technology. However, we believe that, due to the rapid pace of technological innovation in the markets for our products, our ability to establish and maintain a position of technology leadership also depends on the skills of our development personnel. Despite our efforts to protect our intellectual property, third parties can develop products or processes similar to ours. Our means of protecting our proprietary rights may not be adequate, and our competitors may independently develop similar technology, duplicate our products or design around our patents. We believe that at least two of our competitors have begun to ship GaAs substrates produced using a process similar to our VGF technique. Our competitors may also develop and patent improvements to the VGF technology upon which we rely, and thus may limit any exclusivity we enjoy by virtue of our patents or trade secrets.

        It is possible that pending or future United States or foreign patent applications made by us will not be approved, that our issued patents will not protect our intellectual property, or that third parties will challenge the ownership rights or the validity of our patents. In addition, the laws of some foreign countries may not protect our proprietary rights to as great an extent as do the laws of the United States and it may be more difficult to monitor the use of our intellectual property. Our competitors may be able to legitimately ascertain non-patented proprietary technology embedded in our systems. If this occurs, we may not be able to prevent the development of technology substantially similar to ours.

        We may have to resort to costly litigation to enforce our intellectual property rights, to protect our trade secrets or know-how or to determine their scope, validity or enforceability. Enforcing or defending our proprietary technology is expensive, could cause us to divert resources and may not prove successful. Our protective measures may prove inadequate to protect our proprietary rights, and if we fail to enforce or protect our rights, we could lose valuable assets.

        For example, we are currently in negotiations to renew a cross-license entered into with Sumitomo Electric Industries, Ltd. in Japan in connection with the settlement of prior litigation. There can be no assurance that the cross-license that expired on December 31, 2008 will be renewed, or on terms acceptable to us.

Risks Related to Compliance and Other Legal Matters

We need to continue to improve or implement our systems, procedures and controls.

        The shift of our manufacturing operations to China and growth of our business has placed and continues to place a significant strain on our operations and management resources. We have upgraded our inventory control systems, but continue to rely on certain manual processes in our operations and

28

---

Table of Contents

in connection with consolidation of our financial results. If we fail to manage these changes effectively, our operations may be disrupted.

        To manage our business effectively, we may need to implement additional and improved management information systems, further develop our operating, administrative, financial and accounting systems and controls, add experienced senior level managers, and maintain close coordination among our executive, engineering, accounting, marketing, sales and operations organizations.

We are subject to internal control evaluations and attestation requirements of Section 404 of the Sarbanes-Oxley Act.

        Pursuant to Section 404 of the Sarbanes-Oxley Act of 2002, we must include in our Annual Report on Form 10-K a report of management on the effectiveness of our internal control over financial reporting. Ongoing compliance with this requirement is complex, costly and time-consuming. If: (1) we fail to maintain effective internal control over financial reporting; or (2) our management does not timely assess the adequacy of such internal control, we could be subject to regulatory sanctions and the public's perception of us may be adversely impacted.

If we fail to comply with environmental and safety regulations, we may be subject to significant fines or forced to cease our operations; in addition, we could be subject to suits for personal injuries caused by hazardous materials.

        We are subject to federal, state and local environmental and safety laws and regulations in all of our operating locations, including laws and regulations of China, such as laws and regulations related to the development, manufacture and use of our products, the operation of our facilities, and the use of our real property. These laws and regulations govern the use, storage, discharge and disposal of hazardous chemicals during manufacturing, research and development, and sales demonstrations. If we fail to comply with applicable regulations, we could be subject to substantial liability for clean-up efforts, personal injury and fines or suspension or be forced to cease our operations, and/or suspend or terminate the development, manufacture or use of certain of our products, the use of our facilities, or the use of our real property, each of which could have a material adverse effect on our business, financial condition and results of operations.

        We have in the past been the subject of claims made by the California Occupational Safety and Health Administration, or Cal-OSHA, in an investigation primarily regarding impermissible levels of potentially hazardous materials in certain areas of our manufacturing facility in Fremont, California. We were also previously the target of press allegations and correspondence purportedly on behalf of current and/or former employees concerning our environmental compliance programs and exposure of our employees to hazardous materials. In addition, a complaint was previously filed against us and two current officers, alleging personal injury, general negligence, intentional tort, wage loss and other damages, including punitive damages, as a result of exposure of plaintiffs to high levels of gallium arsenide in gallium arsenide wafers, and methanol. Other current and/or former employees could bring litigation against us in the future. Although we have put in place engineering, administrative and personnel protective equipment programs to address these issues, our ability to expand or continue to operate our present locations could be restricted or we could be required to acquire costly remediation equipment or incur other significant expenses if we were found liable for failure to comply with environmental and safety regulations. Existing or future changes in laws or regulations in the United States and China may require us to incur significant expenditures or liabilities, or may restrict our operations. In addition, our employees could be exposed to chemicals or other hazardous materials at our facilities and we may be subject to lawsuits seeking damages for wrongful death or personal injuries allegedly caused by exposure to chemicals or hazardous materials at our facilities.

29

---

Table of Contents

        Litigation is inherently uncertain and while we would expect to defend ourselves vigorously, it is possible that our business, financial condition, results of operations or cash flows could be affected in any particular period by litigation pending and any additional litigation brought against us. In addition, future litigation could divert management's attention from our business and operations, causing our business and financial results to suffer. We could incur defense or settlement costs in excess of the insurance covering these litigation matters, or that could result in significant judgments against us or cause us to incur costly settlements, in excess of our insurance limits.

Item 1B.    Unresolved Staff Comments

        None.

30

---

Table of Contents

Item 2.    Properties

        Our principal properties as of February 28, 2010 are as follows:

        We consider each facility to be in good operating condition and adequate for its present use, and believe that each facility has sufficient plant capacity to meet its current and anticipated operating requirements.

31

---

Table of Contents

Item 3.    Legal Proceedings

        From time to time we may be involved in judicial or administrative proceedings concerning matters arising in the ordinary course of business. We do not expect that any of these matters, individually or in the aggregate, will have a material adverse effect on our business, financial condition, cash flows or results of operation.

Item 4.    Reserved

        None.

32

---

Table of Contents

PART II

Item 5.    Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

        Our common stock has been trading publicly on the NASDAQ Global Market (NASDAQ) under the symbol "AXTI" since May 20, 1998, the date we consummated our initial public offering. The following table sets forth the range of high and low sales prices of the common stock for the periods indicated, as reported by NASDAQ.

        As of December 31, 2009, there were 86 holders of record of our common stock. Because many shares of AXT's common stock are held by brokers and other institutions on behalf of stockholders, we are unable to estimate the total number of beneficial owners of our common stock.

        We have never paid or declared any cash dividends on our common stock and do not anticipate paying cash dividends in the foreseeable future. Dividends accrue on our outstanding Series A preferred stock at the rate of $0.20 per annum per share of Series A preferred stock. The 883,000 shares of $0.001 par value Series A preferred stock issued and outstanding as of December 31, 2009 and 2008 respectively, valued at $3,532,000 are non-voting and non-convertible preferred stock with a 5.0% cumulative annual dividend rate payable when declared by the board of directors, and $4 per share liquidation preference over common stock, and must be paid before any distribution is made to common stockholders. These preferred shares were issued to Lyte Optronics, Inc. stockholders in connection with the completion of our acquisition of Lyte Optronics, Inc. on May 28, 1999.

Issuer Purchases of Equity Securities

        During the years ended December 31, 2009 and 2008, we did not repurchase any shares of our common stock.

33

---

Table of Contents

Comparison of Stockholder Return

        Set forth below is a line graph comparing the annual percentage change in the cumulative total return to the stockholders of the Company on our common stock with the CRSP Total Return Index for the Nasdaq Stock Market (U.S. Companies) and the Nasdaq Electronic Components Index for the period commencing December 31, 2004, and ending December 31, 2009.

COMPARISON OF 5 YEAR CUMULATIVE TOTAL RETURN*
Among AXT, Inc., The NASDAQ Composite Index
And The NASDAQ Electronic Components Index

*

$100 invested on 12/31/04 in stock & index—including reinvestment of dividends.
Fiscal year ending December 31.

34

---

Table of Contents

Item 6.    Selected Consolidated Financial Data

        The following selected consolidated financial data is derived from and should be read in conjunction with our consolidated financial statements and related notes set forth in Item 8 below, and in our previously filed reports on Form 10-K. See also Item 7. "Management's Discussion and Analysis of Financial Condition and Results of Operations" for further information relating to items reflecting our results of operations and financial condition.

35

---

Table of Contents

---

*

Primarily the United States.

---

NM:

percentage not meaningful