UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

Form 10-K

 

 

Commission file number 0-3134

PARK-OHIO HOLDINGS CORP.

(Exact name of registrant as specified in its charter)

 

 

 

Registrant’s telephone number, including area code: (440) 947-2000

Securities registered pursuant to Section 12(b) of the Act:

 

 

Securities registered pursuant to Section 12(g) of the Act:

None

Park-Ohio Holdings Corp. is a successor issuer to Park-Ohio Industries, Inc.

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes o     No þ

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  Yes o     No þ

 

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes þ     No o

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes o     No o

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  o

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

 

 

Indicate by check mark whether the registrant is a shell company (as defined in Exchange Act Rule 12b-2).  Yes o     No þ

 

Aggregate market value of the registrant’s Common Stock held by non-affiliates of the registrant: Approximately $117,004,900, based on the closing price of $14.39 per share of the registrant’s Common Stock on June 30, 2010.

 

Number of shares outstanding of the registrant’s Common Stock, par value $1.00 per share, as of February 28, 2011: 11,837,678.

 

DOCUMENTS INCORPORATED BY REFERENCE

 

Portions of the registrant’s definitive proxy statement for the Annual Meeting of Shareholders to be held on May 26, 2011 are incorporated by reference into Part III of this Form 10-K.

 

 

PARK-OHIO HOLDINGS CORP.

FORM 10-K ANNUAL REPORT
FOR THE FISCAL YEAR ENDED DECEMBER 31, 2010

TABLE OF CONTENTS

 

 

 

Overview

 

Park-Ohio Holdings Corp. (“Holdings”) was incorporated as an Ohio corporation in 1998. Holdings, primarily through the subsidiaries owned by its direct subsidiary, Park-Ohio Industries, Inc. (“Park-Ohio”), is an industrial supply chain logistics and diversified manufacturing business operating in three segments: Supply Technologies, Aluminum Products and Manufactured Products.

 

References herein to “we” or “the Company” include, where applicable, Holdings, Park-Ohio and Holdings’ other direct and indirect subsidiaries.

 

Supply Technologies provides our customers with Total Supply Management^tm services for a broad range of high-volume, specialty production components. Our Aluminum Products business manufactures cast and machined aluminum components, and our Manufactured Products business is a major manufacturer of highly-engineered industrial products. Our businesses serve large, industrial original equipment manufacturers (“OEMs”) in a variety of industrial sectors, including the automotive and vehicle parts, heavy-duty truck, industrial equipment, steel, rail, electrical distribution and controls, aerospace and defense, oil and gas, power sports/fitness equipment, HVAC, electrical components, appliance and semiconductor equipment industries. As of December 31, 2010 we employed approximately 3,200 persons.

 

The following table summarizes the key attributes of each of our business segments:

 

Supply Technologies

 

Our Supply Technologies business provides our customers with Total Supply Management^tm, a proactive solutions approach that manages the efficiencies of every aspect of supplying production parts and materials to our customers’ manufacturing floor, from strategic planning to program implementation. Total Supply Management^tm includes such services as engineering and design support, part usage and cost analysis, supplier selection, quality assurance, bar coding, product packaging and tracking, just-in-time and point-of-use delivery, electronic billing services and ongoing technical support. We operate 49 logistics service centers in the United States, Mexico, Canada, Puerto Rico, Scotland, Ireland, Hungary, China, Taiwan, Singapore and India, as well as production sourcing and support centers in Asia. Through our supply chain management programs, we supply more than 190,000 globally-sourced production components, many of which are specialized and customized to meet individual customers’ needs.

 

Products and Services.  Total Supply Management^tm provides our customers with an expert partner in strategic planning, global sourcing, technical services, parts and materials, logistics, distribution and inventory management of production components. Some production components are characterized by low per unit supplier prices relative to the indirect costs of supplier management, quality assurance, inventory management and delivery to the production line. In addition, Supply Technologies delivers an increasingly broad range of higher-cost production components including valves, electro-mechanical hardware, fittings, steering components and many others. Applications engineering specialists and the direct sales force work closely with the engineering staff of OEM customers to recommend the appropriate production components for a new product or to suggest alternative components that reduce overall production costs, streamline assembly or enhance the appearance or performance of the end product. As an additional service, Supply Technologies recently began providing spare parts and aftermarket products to end users of its customers’ products.

 

Total Supply Management^tm services are typically provided to customers pursuant to sole-source arrangements. We believe our services distinguish us from traditional buy/sell distributors, as well as manufacturers who supply products directly to customers, because we outsource our customers’ high-volume production components supply chain management, providing processes customized to each customer’s needs and replacing numerous current suppliers with a sole-source relationship. Our highly-developed, customized, information systems provide transparency and flexibility through the complete supply chain. This enables our customers to: (1) significantly reduce the direct and indirect cost of production component processes by outsourcing internal purchasing, quality assurance and inventory fulfillment responsibilities; (2) reduce the amount of working capital invested in inventory and floor space; (3) reduce component costs through purchasing efficiencies, including bulk buying and supplier consolidation; and (4) receive technical expertise in production component selection and design and engineering. Our sole-source arrangements foster long-term, entrenched supply relationships with our customers and, as a result, the average tenure of service for our top 50 Supply Technologies clients exceeds six years. Supply Technologies’ remaining sales are generated through the wholesale supply of industrial products to other manufacturers and distributors pursuant to master or authorized distributor relationships.

 

The Supply Technologies segment also engineers and manufactures precision cold formed and cold extruded products, including locknuts, SPAC^® nuts and wheel hardware, which are principally used in applications where controlled tightening is required due to high vibration. Supply Technologies produces both standard items and specialty products to customer specifications, which are used in large volumes by customers in the automotive, heavy-duty truck and rail industries.

 

Markets and Customers.  For the year ended December 31, 2010, approximately 83% of Supply Technologies’ net sales were to domestic customers. Remaining sales were primarily to manufacturing facilities of large, multinational customers located in Canada, Mexico, Europe and Asia. Total Supply Management^tm services and production components are used extensively in a variety of industries, and demand is generally related to the state of the economy and to the overall level of manufacturing activity.

 

Supply Technologies markets and sells its services to over 6,100 customers domestically and internationally. The principal markets served by Supply Technologies are the heavy-duty truck, automotive

and vehicle parts, electrical distribution and controls, consumer electronics, power sports/fitness equipment, recreational vehicles, HVAC, agricultural and construction equipment, semiconductor equipment, aerospace and defense, and appliance industries. The five largest customers, within which Supply Technologies sells through sole-source contracts to multiple operating divisions or locations, accounted for approximately 26% and 24% of the sales of Supply Technologies for 2010 and 2009, respectively. The loss of any two of its top five customers could have a material adverse effect on the results of operations and financial conditions of this segment.

 

The Company evaluated its long-lived assets to determine whether the carrying amount of such assets was recoverable in accordance with accounting guidance by comparing the carrying amount to the sum of the undiscounted cash flows expected to result from the use and eventual disposition of the assets. If the carrying value of the assets exceeded the expected cash flows, the Company estimated the fair value of these assets to determine whether an impairment existed. The Company recorded restructuring and asset impairment charges of $4.0 million during the fourth quarter of 2009. See Note O to the consolidated financial statements included elsewhere herein.

 

Competition.  A limited number of companies compete with Supply Technologies to provide supply management services for production parts and materials. Supply Technologies competes in North America, Mexico, Europe and Asia, primarily on the basis of its Total Supply Management^tm services, including engineering and design support, part usage and cost analysis, supplier selection, quality assurance, bar coding, product packaging and tracking, just-in-time and point-of-use delivery, electronic billing services and ongoing technical support, and its geographic reach, extensive product selection, price and reputation for high service levels. Numerous North American and foreign companies compete with Supply Technologies in manufacturing cold-formed and cold-extruded products.

 

Recent Developments.  During the third quarter of 2010, Supply Technologies completed the acquisition of certain assets and assumed specific liabilities relating to the Assembly Components Systems (“ACS”) business of Lawson Products, Inc. for $16.0 million in cash and a $2.2 million subordinated promissory note payable in equal quarterly installments over three years. ACS is a provider of supply chain management solutions for a broad range of production components through its service centers throughout North America. The Company recorded a gain of $2.2 million representing the excess of the aggregate fair value of purchased net assets over the purchase price. See Note C to the consolidated financial statements included elsewhere herein.

 

Aluminum Products

 

We believe that we are one of the few aluminum component suppliers that has the capability to provide a wide range of high-volume, high-quality products utilizing a broad range of processes, including gravity and low pressure permanent mold, die-cast and lost-foam, as well as emerging alternative casting technologies. Our ability to offer our customers this comprehensive range of capabilities at a low cost provides us with a competitive advantage. We produce our aluminum components at six manufacturing facilities in Ohio, Indiana and Georgia.

 

Products and Services.  Our Aluminum Products business casts and machines aluminum engine, transmission, brake, suspension and other components for automotive, agricultural equipment, construction equipment, heavy-duty truck and marine equipment OEMs, primarily on a sole-source basis. Aluminum Products’ principal products include front engine covers, cooling modules, control arms, knuckles, pump housings, clutch retainers and pistons, master cylinders, pinion housings, oil pans and flywheel spacers. In addition, we also provide value-added services such as design engineering, machining and part assembly. Although these parts are lightweight, they possess high durability and integrity characteristics even under extreme pressure and temperature conditions.

 

Demand by automotive OEMs for aluminum castings has increased in recent years as they have sought lighter alternatives to steel and iron, primarily to increase fuel efficiency without compromising structural integrity. We believe that this replacement trend will continue as end-users and the regulatory environment require greater fuel efficiency.

Markets and Customers.  The five largest customers, within which Aluminum Products sells to multiple operating divisions through sole-source contracts, accounted for approximately 57% of Aluminum Products sales for 2010 and 2009. The loss of any one of these customers could have a material adverse effect on the results of operations and financial condition of this segment.

 

Competition.  Aluminum Products competes principally on the basis of its ability to: (1) engineer and manufacture high-quality, cost-effective, machined castings utilizing multiple casting technologies in large volumes; (2) provide timely delivery; and (3) retain the manufacturing flexibility necessary to quickly adjust to the needs of its customers. There are few domestic companies with aluminum casting capabilities able to meet the customers’ stringent quality and service standards and lean manufacturing techniques. As one of these suppliers, Aluminum Products is well-positioned to benefit as customers continue to consolidate their supplier base.

 

Recent Developments.  On September 30, 2010, the Company entered a Bill of Sale with Rome Die Casting LLC (“Rome”), a producer of aluminum high pressure die castings, pursuant to which Rome agreed to transfer to the Company substantially all of its assets in exchange for approximately $7.5 million of notes receivable due from Rome held by the Company.

 

Manufactured Products

 

Our Manufactured Products segment operates a diverse group of niche manufacturing businesses that design and manufacture a broad range of highly-engineered products, including induction heating and melting systems, pipe threading systems, rubber products and forged and machined products. We manufacture these products in twelve domestic facilities and ten international facilities in Canada, Mexico, the United Kingdom, Belgium, Germany, China and Japan.

 

Products and Services.  Our induction heating and melting business utilizes proprietary technology and specializes in the engineering, construction, service and repair of induction heating and melting systems, primarily for the ferrous and non-ferrous metals, silicon, coatings, forging, foundry, automotive and construction equipment industries. Our induction heating and melting systems are engineered and built to customer specifications and are used primarily for melting, heating, and surface hardening of metals and curing of coatings. Approximately 51% of our induction heating and melting systems’ revenues are derived from the sale of replacement parts and provision of field service, primarily for the installed base of our own products. Our pipe threading business serves the oil and gas industry. We also engineer and install mechanical forging presses, sell spare parts and provide field service for the large existing base of mechanical forging presses and hammers in North America. We machine, induction harden and surface finish crankshafts and camshafts, used primarily in locomotives. We forge aerospace and defense structural components such as landing gears and struts, as well as rail products such as railcar center plates and draft lugs. We manufacture injection mold rubber and silicone products, including wire harnesses, shock and vibration mounts, spark plug boots and nipples and general sealing gaskets.

 

Markets and Customers.  We sell induction heating and other capital equipment to component manufacturers and OEMs in the ferrous and non-ferrous metals, silicon, coatings, forging, foundry, automotive, truck, construction equipment and oil and gas industries. We sell forged and machined products to locomotive manufacturers, machining companies and sub-assemblers who finish aerospace and defense products for OEMs, and railcar builders and maintenance providers. We sell rubber products primarily to sub-assemblers in the automotive, food processing and consumer appliance industries.

 

During the fourth quarter of 2009, the Company evaluated its long-lived assets at one of its forging units to determine whether the carrying amount of such assets was recoverable in accordance with accounting guidance by comparing the carrying amount to the sum of undiscounted cash flows expected to result from the use and eventual disposition of the assets and recorded restructuring and asset impairment charges of $3.0 million in 2009. See Note O to the consolidated financial statements included elsewhere herein.

Competition.  We compete with small- to medium-sized domestic and international equipment manufacturers on the basis of service capability, ability to meet customer specifications, delivery performance and engineering expertise. We compete domestically and internationally with small- to medium- sized forging and machining businesses on the basis of product quality and precision. We compete with other domestic small- to medium-sized manufacturers of injection molded rubber and silicone products primarily on the basis of price and product quality.

 

Recent Developments.  On December 31, 2010, the Company through its subsidiary, Ajax Tocco Magnethermic, acquired the assets and the related induction heating intellectual property of ABP Induction’s U.S. heating business operating as Pillar Induction (“Pillar”) for $9.9 million in cash. Pillar provides complete turnkey automated induction power systems and aftermarket parts and service to a worldwide market.

 

Sales and Marketing

 

Supply Technologies markets its products and services in the United States, Mexico, Canada, Western and Eastern Europe and East and South Asia primarily through its direct sales force, which is assisted by applications engineers who provide the technical expertise necessary to assist the engineering staff of OEM customers in designing new products and improving existing products. Aluminum Products primarily markets and sells its products in North America through internal sales personnel and independent sales representatives. Manufactured Products primarily markets and sells its products in North America through both internal sales personnel and independent sales representatives. Induction heating and pipe threading equipment is also marketed and sold in Europe, Asia, Latin America and Africa through both internal sales personnel and independent sales representatives. In some instances, the internal engineering staff assists in the sales and marketing effort through joint design and applications-engineering efforts with major customers.

 

Raw Materials and Suppliers

 

Supply Technologies purchases substantially all of its production components from third-party suppliers. Supply Technologies has multiple sources of supply for its components. An increasing portion of Supply Technologies’ production components are purchased from suppliers in foreign countries, primarily Canada, Taiwan, China, South Korea, Singapore, India and multiple European countries. We are dependent upon the ability of such suppliers to meet stringent quality and performance standards and to conform to delivery schedules. Aluminum Products and Manufactured Products purchase substantially all of their raw materials, principally metals and certain component parts incorporated into their products, from third-party suppliers and manufacturers. Most raw materials required by Aluminum Products and Manufactured Products are commodity products available from several domestic suppliers. Management believes that raw materials and component parts other than certain specialty products are available from alternative sources.

 

Backlog

 

Management believes that backlog is not a meaningful measure for Supply Technologies, as a majority of Supply Technologies’ customers require just-in-time delivery of production components. Management believes that Aluminum Products’ backlog as of any particular date is not a meaningful measure of sales for any future period as a significant portion of sales are on a release or firm order basis. The backlog of Manufactured Products’ orders believed to be firm as of December 31, 2010 was $174.4 million compared with $178.8 million as of December 31, 2009. Approximately $20.0 million of the backlog as of December 31, 2010 is scheduled to be shipped after 2011. The remainder is scheduled to be shipped in 2011.

 

Environmental, Health and Safety Regulations

 

We are subject to numerous federal, state and local laws and regulations designed to protect public health and the environment, particularly with regard to discharges and emissions, as well as handling,

storage, treatment and disposal, of various substances and wastes. Our failure to comply with applicable environmental laws and regulations and permit requirements could result in civil and criminal fines or penalties or enforcement actions, including regulatory or judicial orders enjoining or curtailing operations or requiring corrective measures. Pursuant to certain environmental laws, owners or operators of facilities may be liable for the costs of response or other corrective actions for contamination identified at or emanating from current or former locations, without regard to whether the owner or operator knew of, or was responsible for, the presence of any such contamination, and for related damages to natural resources. Additionally, persons who arrange for the disposal or treatment of hazardous substances or materials may be liable for costs of response at sites where they are located, whether or not the site is owned or operated by such person.

 

From time to time, we have incurred, and are presently incurring, costs and obligations for correcting environmental noncompliance and remediating environmental conditions at certain of our properties. In general, we have not experienced difficulty in complying with environmental laws in the past, and compliance with environmental laws has not had a material adverse effect on our financial condition, liquidity and results of operations. Our capital expenditures on environmental control facilities were not material during the past five years and such expenditures are not expected to be material to us in the foreseeable future.

 

We are currently, and may in the future, be required to incur costs relating to the investigation or remediation of property, including property where we have disposed of our waste, and for addressing environmental conditions. For instance, we have been identified as a potentially responsible party at third-party sites under the Comprehensive Environmental Response, Compensation and Liability Act of 1980, as amended, or comparable state laws, which provide for strict and, under certain circumstances, joint and several liability. We are participating in the cost of certain clean-up efforts at several of these sites. The availability of third-party payments or insurance for environmental remediation activities is subject to risks associated with the willingness and ability of the third party to make payments. However, our share of such costs has not been material and, based on available information, we do not expect our exposure at any of these locations to have a material adverse effect on our results of operations, liquidity or financial condition.

 

Information as to Industry Segment Reporting and Geographic Areas

 

The information contained in note B to the consolidated financial statements included elsewhere herein relating to (1) net sales, income before income taxes, identifiable assets and other information by industry segment and (2) net sales and assets by geographic region for the years ended December 31, 2010, 2009 and 2008 is incorporated herein by reference.

 

Recent Developments

 

The information contained in Note C, Note D and Note O to the consolidated financial statements included elsewhere herein is incorporated herein by reference.

 

Available Information

 

We file annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and other information, including amendments to these reports, with the Securities and Exchange Commission (“SEC”). The public can obtain copies of these materials by visiting the SEC’s Public Reference Room at 100 F Street, NE, Washington, D.C. 20549, by calling the SEC at 1-800-SEC-0330, or by accessing the SEC’s website at http://www.sec.gov. In addition, as soon as reasonably practicable after such materials are filed with or furnished to the SEC, we make such materials available on our website at http://www.pkoh.com. The information on our website is not a part of this annual report on Form 10-K.

 

The following are certain risk factors that could affect our business, results of operations and financial condition. These risks are not the only ones we face. If any of the following risks occur, our business, results of operations or financial condition could be adversely affected.

 

Adverse credit market conditions may significantly affect our access to capital, cost of capital and ability to meet liquidity needs.

 

Disruptions, uncertainty or volatility in the credit markets may adversely impact our ability to access credit already arranged and the availability and cost of credit to us in the future. These market conditions may limit our ability to replace, in a timely manner, maturing liabilities and access the capital necessary to grow and maintain our business. Accordingly, we may be forced to delay raising capital or pay unattractive interest rates, which could increase our interest expense, decrease our profitability and significantly reduce our financial flexibility. Longer-term disruptions in the capital and credit markets as a result of uncertainty, changing or increased regulation, reduced alternatives or failures of significant financial institutions could adversely affect our access to liquidity needed for our business. Any disruption could require us to take measures to conserve cash until the markets stabilize or until alternative credit arrangements or other funding for our business needs can be arranged. Such measures could include deferring capital expenditures and reducing or eliminating future share repurchases or other discretionary uses of cash. Overall, our results of operations, financial condition and cash flows could be materially adversely affected by disruptions in the credit markets.

 

The recent global financial crisis may have significant effects on our customers and suppliers that would result in material adverse effects on our business and operating results.

 

The recent global financial crisis, which included, among other things, significant reductions in available capital and liquidity from banks and other providers of credit, substantial reductions and fluctuations in equity and currency values worldwide, and concerns that the worldwide economy may enter into a prolonged recessionary period, may materially adversely affect our customers’ access to capital or willingness to spend capital on our products or their ability to pay for products that they will order or have already ordered from us. In addition, the recent global financial crisis may materially adversely affect our suppliers’ access to capital and liquidity with which to maintain their inventories, production levels and product quality, which could cause them to raise prices or lower production levels.

 

These potential effects of the recent global financial crisis are difficult to forecast and mitigate. As a consequence, our operating results for a particular period are difficult to predict, and, therefore, prior results are not necessarily indicative of results to be expected in future periods. Any of the foregoing effects could have a material adverse effect on our business, results of operations and financial condition.

 

The recent global financial crisis may have significant effects on our customers that would result in our inability to borrow or to meet our debt service coverage ratio in our revolving credit facility.

 

As of December 31, 2010, we were in compliance with our debt service coverage ratio covenant and other covenants contained in our revolving credit facility. While we expect to remain in compliance throughout 2011, declines in demand in the automotive industry and in sales volumes could adversely impact our ability to remain in compliance with certain of these financial covenants. Additionally, to the extent our customers are adversely affected by the decline in the economy in general, they may not be able to pay their accounts payable to us on a timely basis or at all, which would make the accounts receivable ineligible for purposes of the revolving credit facility and could reduce our borrowing base and our ability to borrow.

The industries in which we operate are cyclical and are affected by the economy in general.

 

We sell products to customers in industries that experience cyclicality (expectancy of recurring periods of economic growth and slowdown) in demand for products and may experience substantial increases and decreases in business volume throughout economic cycles. Industries we serve, including the automotive and vehicle parts, heavy-duty truck, industrial equipment, steel, rail, electrical distribution and controls, aerospace and defense, power sports/fitness equipment, HVAC, electrical components, appliance and semiconductor equipment industries, are affected by consumer spending, general economic conditions and the impact of international trade. A downturn in any of the industries we serve could have a material adverse effect on our financial condition, liquidity and results of operations.

 

Because a significant portion of our sales is to the automotive and heavy-duty truck industries, a decrease in the demand of these industries or the loss of any of our major customers in these industries could adversely affect our financial health.

 

Demand for certain of our products is affected by, among other things, the relative strength or weakness of the automotive and heavy-duty truck industries. The domestic automotive and heavy-duty truck industries are highly cyclical and may be adversely affected by international competition. In addition, the automotive and heavy-duty truck industries are significantly unionized and subject to work slowdowns and stoppages resulting from labor disputes. We derived 24% and 5% of our net sales during the year ended December 31, 2010 from the automobile and heavy-duty truck industries, respectively. Dramatically lower global automotive sales have resulted in lower demand for our products. Further economic decline that results in a reduction in automotive sales and production by our customers could have a material adverse effect on our business, results of operations and financial condition.

 

The loss of a portion of business to any of our major automotive or heavy-duty truck customers could have a material adverse effect on our financial condition, cash flow and results of operations. We cannot assure you that we will maintain or improve our relationships in these industries or that we will continue to supply these customers at current levels.

 

Our Supply Technologies customers are generally not contractually obligated to purchase products and services from us.

 

Most of the products and services are provided to our Supply Technologies customers under purchase orders as opposed to long-term contracts. When we do enter into long-term contracts with our customers, many of them only establish pricing terms and do not obligate our Supply Technologies customers to buy required minimum amounts from us or to buy from us exclusively. Accordingly, many of our Supply Technologies customers may decrease the amount of products and services that they purchase from us or even stop purchasing from us altogether, either of which could have a material adverse effect on our net sales and profitability.

 

We are dependent on key customers.

 

We rely on several key customers. For the year ended December 31, 2010, our ten largest customers accounted for approximately 27% of our net sales. Many of our customers place orders for products on an as-needed basis and operate in cyclical industries and, as a result, their order levels have varied from period to period in the past and may vary significantly in the future. Due to competitive issues, we have lost key customers in the past and may again in the future. Customer orders are dependent upon their markets and may be subject to delays or cancellations. As a result of dependence on our key customers, we could experience a material adverse effect on our business and results of operations if any of the following were to occur:

 

 

 

If any of our key customers become insolvent or file for bankruptcy, our ability to recover accounts receivable from that customer would be adversely affected and any payments we received in the preference period prior to a bankruptcy filing may be potentially recoverable, which could adversely impact our results of operations.

 

During 2009, Chrysler’s U.S. operations, General Motor’s U.S. operations and Metaldyne Corporation filed for bankruptcy protection under Chapter 11 of the United States Bankruptcy Code. The Company has collected substantially all amounts that were due from Chrysler and General Motors as of the dates of the respective bankruptcy filings and as such there was no charge to earnings as a result of these bankruptcies. The account receivable from Metaldyne at the time of the bankruptcy was $4.2 million. The Company recorded a $4.2 million charge to reserve for the collection of the account receivable when Metaldyne announced it had completed the sale of substantially all of its assets to MD Investors Corporation, effectively making no payments to its unsecured creditors, including us.

 

We operate in highly competitive industries.

 

The markets in which all three of our segments sell their products are highly competitive. Some of our competitors are large companies that have greater financial resources than we have. We believe that the principal competitive factors for our Supply Technologies segment are an approach reflecting long-term business partnership and reliability, sourced product quality and conformity to customer specifications, timeliness of delivery, price and design and engineering capabilities. We believe that the principal competitive factors for our Aluminum Products and Manufactured Products segments are product quality and conformity to customer specifications, design and engineering capabilities, product development, timeliness of delivery and price. The rapidly evolving nature of the markets in which we compete may attract new entrants as they perceive opportunities, and our competitors may foresee the course of market development more accurately than we do. In addition, our competitors may develop products that are superior to our products or may adapt more quickly than we do to new technologies or evolving customer requirements.

 

We expect competitive pressures in our markets to remain strong. These pressures arise from existing competitors, other companies that may enter our existing or future markets and, in some cases, our customers, which may decide to internally produce items we sell. We cannot assure you that we will be able to compete successfully with our competitors. Failure to compete successfully could have a material adverse effect on our financial condition, liquidity and results of operations.

 

The loss of key executives could adversely impact us.

 

Our success depends upon the efforts, abilities and expertise of our executive officers and other senior managers, including Edward Crawford, our Chairman and Chief Executive Officer, and Matthew Crawford, our President and Chief Operating Officer, as well as the president of each of our operating units. An event of default occurs under our revolving credit facility if Messrs. E. Crawford and M. Crawford or certain of their related parties own in the aggregate less than 15% of our outstanding common stock, and if at such time neither Mr. E. Crawford nor Mr. M. Crawford holds the office of chairman, chief executive officer or president. The loss of the services of Messrs. E. Crawford and M. Crawford, senior and executive officers, and/or other key individuals could have a material adverse effect on our financial condition, liquidity and results of operations.

 

We may encounter difficulty in expanding our business through targeted acquisitions.

 

We have pursued, and may continue to pursue, targeted acquisition opportunities that we believe would complement our business. We cannot assure you that we will be successful in consummating any acquisitions.

Any targeted acquisitions will be accompanied by the risks commonly encountered in acquisitions of businesses. We may not successfully overcome these risks or any other problems encountered in connection with any of our acquisitions, including the possible inability to integrate an acquired business’ operations, IT technologies, services and products into our business, diversion of management’s attention, the assumption of unknown liabilities, increases in our indebtedness, the failure to achieve the strategic objectives of those acquisitions and other unanticipated problems, some or all of which could materially and adversely affect us. The process of integrating operations could cause an interruption of, or loss of momentum in, our activities. Any delays or difficulties encountered in connection with any acquisition and the integration of our operations could have a material adverse effect on our business, results of operations, financial condition or prospects of our business.

 

Our Supply Technologies business depends upon third parties for substantially all of our component parts.

 

Our Supply Technologies business purchases substantially all of its component parts from third-party suppliers and manufacturers. As such, it is subject to the risk of price fluctuations and periodic delays in the delivery of component parts. Failure by suppliers to continue to supply us with these component parts on commercially reasonable terms, or at all, could have a material adverse effect on us. We depend upon the ability of these suppliers, among other things, to meet stringent performance and quality specifications and to conform to delivery schedules. Failure by third-party suppliers to comply with these and other requirements could have a material adverse effect on our financial condition, liquidity and results of operations.

 

The raw materials used in our production processes and by our suppliers of component parts are subject to price and supply fluctuations that could increase our costs of production and adversely affect our results of operations.

 

Our supply of raw materials for our Aluminum Products and Manufactured Products businesses could be interrupted for a variety of reasons, including availability and pricing. Prices for raw materials necessary for production have fluctuated significantly in the past and significant increases could adversely affect our results of operations and profit margins. While we generally attempt to pass along increased raw materials prices to our customers in the form of price increases, there may be a time delay between the increased raw materials prices and our ability to increase the price of our products, or we may be unable to increase the prices of our products due to pricing pressure or other factors.

 

Our suppliers of component parts, particularly in our Supply Technologies business, may significantly and quickly increase their prices in response to increases in costs of the raw materials, such as steel, that they use to manufacture our component parts. We may not be able to increase our prices commensurate with our increased costs. Consequently, our results of operations and financial condition may be materially adversely affected.

 

The energy costs involved in our production processes and transportation are subject to fluctuations that are beyond our control and could significantly increase our costs of production.

 

Our manufacturing process and the transportation of raw materials, components and finished goods are energy intensive. Our manufacturing processes are dependent on adequate supplies of electricity and natural gas. A substantial increase in the cost of transportation fuel, natural gas or electricity could have a material adverse effect on our margins. We may experience higher than anticipated gas costs in the future, which could adversely affect our results of operations. In addition, a disruption or curtailment in supply could have a material adverse effect on our production and sales levels.

Potential product liability risks exist from the products that we sell.

 

Our businesses expose us to potential product liability risks that are inherent in the design, manufacture and sale of our products and products of third-party vendors that we use or resell. While we currently maintain what we believe to be suitable and adequate product liability insurance, we cannot assure you that we will be able to maintain our insurance on acceptable terms or that our insurance will provide adequate protection against potential liabilities. In the event of a claim against us, a lack of sufficient insurance coverage could have a material adverse effect on our financial condition, liquidity and results of operations. Moreover, even if we maintain adequate insurance, any successful claim could have a material adverse effect on our financial condition, liquidity and results of operations.

 

Some of our employees belong to labor unions, and strikes or work stoppages could adversely affect our operations.

 

As of December 31, 2010, we were a party to seven collective bargaining agreements with various labor unions that covered approximately 385 full-time employees. Our inability to negotiate acceptable contracts with these unions could result in, among other things, strikes, work stoppages or other slowdowns by the affected workers and increased operating costs as a result of higher wages or benefits paid to union members. If the unionized workers were to engage in a strike, work stoppage or other slowdown, or other employees were to become unionized, we could experience a significant disruption of our operations and higher ongoing labor costs, which could have a material adverse effect on our business, financial condition and results of operations.

 

We operate and source internationally, which exposes us to the risks of doing business abroad.

 

Our operations are subject to the risks of doing business abroad, including the following:

 

 

In addition, we could be adversely affected by violations of the FCPA and similar worldwide anti-bribery laws. The FCPA and similar anti-bribery laws in other jurisdictions generally prohibit companies and their intermediaries from making improper payments to non-U.S. officials for the purpose of obtaining or retaining business. Our policies mandate compliance with these anti-bribery laws. We operate in many parts of the world that have experienced governmental corruption to some degree and, in certain circumstances, strict compliance with anti-bribery laws may conflict with local customs and practices.

We cannot assure you that our internal controls and procedures always will protect us from the reckless or criminal acts committed by our employees or agents. If we are found to be liable for FCPA violations (either due to our own acts or our inadvertence or due to the acts or inadvertence of others), we could suffer from criminal or civil penalties or other sanctions, which could have a material adverse effect on our business.

 

Any of the events enumerated above could have an adverse effect on our operations in the future by reducing the demand for our products and services, decreasing the prices at which we can sell our products or otherwise having an adverse effect on our business, financial condition or results of operations. We cannot assure you that we will continue to operate in compliance with applicable customs, currency exchange control regulations, transfer pricing regulations or any other laws or regulations to which we may be subject. We also cannot assure you that these laws will not be modified.

 

Unexpected delays in the shipment of large, long-lead industrial equipment could adversely affect our results of operations in the period in which shipment was anticipated.

 

Long-lead industrial equipment contracts are a significant and growing part of our business. We primarily use the percentage of completion method to account for these contracts. Nevertheless, under this method, a large proportion of revenues and earnings on such contracts are recognized close to shipment of the equipment. Unanticipated shipment delays on large contracts could postpone recognition of revenue and earnings into future periods. Accordingly, if shipment was anticipated in the fourth quarter of a year, unanticipated shipment delays could adversely affect results of operations in that year.

 

We are subject to significant environmental, health and safety laws and regulations and related compliance expenditures and liabilities.

 

Our businesses are subject to many foreign, federal, state and local environmental, health and safety laws and regulations, particularly with respect to the use, handling, treatment, storage, discharge and disposal of substances and hazardous wastes used or generated in our manufacturing processes. Compliance with these laws and regulations is a significant factor in our business. We have incurred and expect to continue to incur significant expenditures to comply with applicable environmental laws and regulations. Our failure to comply with applicable environmental laws and regulations and permit requirements could result in civil or criminal fines or penalties or enforcement actions, including regulatory or judicial orders enjoining or curtailing operations or requiring corrective measures, installation of pollution control equipment or remedial actions.

 

We are currently, and may in the future be, required to incur costs relating to the investigation or remediation of property, including property where we have disposed of our waste, and for addressing environmental conditions. Some environmental laws and regulations impose liability and responsibility on present and former owners, operators or users of facilities and sites for contamination at such facilities and sites without regard to causation or knowledge of contamination. In addition, we occasionally evaluate various alternatives with respect to our facilities, including possible dispositions or closures. Investigations undertaken in connection with these activities may lead to discoveries of contamination that must be remediated, and closures of facilities may trigger compliance requirements that are not applicable to operating facilities. Consequently, we cannot assure you that existing or future circumstances, the development of new facts or the failure of third parties to address contamination at current or former facilities or properties will not require significant expenditures by us.

 

We expect to continue to be subject to increasingly stringent environmental and health and safety laws and regulations. It is difficult to predict the future interpretation and development of environmental and health and safety laws and regulations or their impact on our future earnings and operations. We anticipate that compliance will continue to require increased capital expenditures and operating costs. Any increase in these costs, or unanticipated liabilities arising for example out of discovery of previously unknown conditions or more aggressive enforcement actions, could adversely affect our results of

operations, and there is no assurance that they will not exceed our reserves or have a material adverse effect on our financial condition.

 

If our information systems fail, our business will be materially affected.

 

We believe that our information systems are an integral part of the Supply Technologies segment and, to a lesser extent, the Aluminum Products and Manufactured Products segments. We depend on our information systems to process orders, manage inventory and accounts receivable collections, purchase products, maintain cost-effective operations, route and re-route orders and provide superior service to our customers. We cannot assure you that a disruption in the operation of our information systems used by Supply Technologies, including the failure of the supply chain management software to function properly, or those used by Aluminum Products and Manufactured Products will not occur. Any such disruption could have a material adverse effect on our financial condition, liquidity and results of operations.

 

Operating problems in our business may materially adversely affect our financial condition and results of operations.

 

We are subject to the usual hazards associated with manufacturing and the related storage and transportation of raw materials, products and waste, including explosions, fires, leaks, discharges, inclement weather, natural disasters, mechanical failure, unscheduled downtime and transportation interruption or calamities. The occurrence of material operating problems at our facilities may have a material adverse effect on our operations as a whole, both during and after the period of operational difficulties.

 

Changes in accounting standards or inaccurate estimates or assumptions in the application of accounting policies could adversely affect our financial results.

 

Our accounting policies and methods are fundamental to how we record and report our financial condition and results of operations. Some of these polices require use of estimates and assumptions that may affect the reported value of our assets or liabilities and financial results and are critical because they require management to make difficult, subjective, and complex judgments about matters that are inherently uncertain. Those who set and interpret the accounting standards (such as the Financial Accounting Standards Board, the Securities and Exchange Commission, and our independent registered public accounting firm) may amend or even reverse their previous interpretations or positions on how these standards should be applied. These changes can be hard to predict and can materially impact how we record and report our financial condition and results of operations. In some cases, we could be required to apply a new or revised standard retroactively, resulting in the restatement of prior period financial statements. For a further discussion of some of our critical accounting policies and standards and recent changes, see Critical Accounting Policies and Estimates in Management’s Discussion and Analysis of Financial Condition and Results of Operations and Note A to the consolidated financial statements included elsewhere herein.

 

Our Chairman of the Board and Chief Executive Officer and our President and Chief Operating Officer collectively beneficially own a significant portion of our outstanding common stock and their interests may conflict with yours.

 

As of February 25, 2011, Edward Crawford, our Chairman of the Board and Chief Executive Officer, and Matthew Crawford, our President and Chief Operating Officer, collectively beneficially owned approximately 27% of our common stock. Mr. E. Crawford is Mr. M. Crawford’s father. Their interests could conflict with your interests. For example, if we encounter financial difficulties or are unable to pay our debts as they mature, the interests of Messrs. E. Crawford and M. Crawford may conflict with your interests as a shareholder.

 

None.

 

 

As of December 31, 2010, our operations included numerous manufacturing and supply chain logistics services facilities located in 24 states in the United States and in Puerto Rico, as well as in Asia, Canada, Europe and Mexico. Approximately 87% of the available square footage was located in the United States. Approximately 43% of the available square footage was owned. In 2010, approximately 30% of the available domestic square footage was used by the Supply Technologies segment, 47% was used by the Manufactured Products segment and 23% was used by the Aluminum Products segment. Approximately 54% of the available foreign square footage was used by the Supply Technologies segment and 46% was used by the Manufactured Products segment. In the opinion of management, our facilities are generally well maintained and are suitable and adequate for their intended uses.

 

The following table provides information relative to our principal facilities as of December 31, 2010.

 

 

 

 

 

 

We are subject to various pending and threatened lawsuits in which claims for monetary damages are asserted in the ordinary course of business. While any litigation involves an element of uncertainty, in the opinion of management, liabilities, if any, arising from currently pending or threatened litigation are not expected to have a material adverse effect on our financial condition, liquidity or results of operations.

 

At December 31, 2010, we were a co-defendant in approximately 260 cases asserting claims on behalf of approximately 1,230 plaintiffs alleging personal injury as a result of exposure to asbestos. These asbestos cases generally relate to production and sale of asbestos-containing products and allege various theories of liability, including negligence, gross negligence and strict liability and seek compensatory and, in some cases, punitive damages.

 

In every asbestos case in which we are named as a party, the complaints are filed against multiple named defendants. In substantially all of the asbestos cases, the plaintiffs either claim damages in excess of a specified amount, typically a minimum amount sufficient to establish jurisdiction of the court in which the case was filed (jurisdictional minimums generally range from $25,000 to $75,000), or do not specify the monetary damages sought. To the extent that any specific amount of damages is sought, the amount applies to claims against all named defendants.

 

There are only five asbestos cases, involving 25 plaintiffs, that plead specified damages. In each of the five cases, the plaintiff is seeking compensatory and punitive damages based on a variety of potentially alternative causes of action. In three cases, the plaintiff has alleged compensatory damages in the amount of $3.0 million for four separate causes of action and $1.0 million for another cause of action and punitive damages in the amount of $10.0 million. In the fourth case, the plaintiff has alleged against each named defendant, compensatory and punitive damages, each in the amount of $10.0 million for seven separate causes of action. In the fifth case, the plaintiff has alleged compensatory damages in the amount of $20.0 million for three separate causes of action and $5.0 million for another cause of action and punitive damages in the amount of $20.0 million.

 

Historically, we have been dismissed from asbestos cases on the basis that the plaintiff incorrectly sued one of our subsidiaries or because the plaintiff failed to identify any asbestos-containing product manufactured or sold by us or our subsidiaries. We intend to vigorously defend these asbestos cases and believe we will continue to be successful in being dismissed from such cases. However, it is not possible to predict the ultimate outcome of asbestos-related lawsuits, claims and proceedings due to the unpredictable nature of personal injury litigation. Despite this uncertainty, and although our results of operations and cash flows for a particular period could be adversely affected by asbestos-related lawsuits, claims and proceedings, management believes that the ultimate resolution of these matters will not have a material adverse effect on our financial condition, liquidity or results of operations. Among the factors management considered in reaching this conclusion were: (a) our historical success in being dismissed from these types of lawsuits on the bases mentioned above; (b) many cases have been improperly filed against one of our subsidiaries; (c) in many cases the plaintiffs have been unable to establish any causal relationship to us or our products or premises; (d) in many cases, the plaintiffs have been unable to demonstrate that they have suffered any identifiable injury or compensable loss at all, that any injuries that they have incurred did in fact result from alleged exposure to asbestos; and (e) the complaints assert claims against multiple defendants and, in most cases, the damages alleged are not attributed to individual defendants. Additionally, we do not believe that the amounts claimed in any of the asbestos cases are meaningful indicators of our potential exposure because the amounts claimed typically bear no relation to the extent of the plaintiff’s injury, if any.

Our cost of defending these lawsuits has not been material to date and, based upon available information, our management does not expect its future costs for asbestos-related lawsuits to have a material adverse effect on our results of operations, liquidity or financial position.

 

 

 

 

Information with respect to the executive officers of the Company as of March 8, 2011 is as follows:

 

 

Mr. E. Crawford has been a director and our Chairman of the Board and Chief Executive Officer since 1992. He has also served as the Chairman of Crawford Group, Inc., a management company for a group of manufacturing companies, since 1964.

 

Mr. M. Crawford has been President and Chief Operating Officer since 2003 and joined us in 1995 as Assistant Secretary and Corporate Counsel. He was also our Senior Vice President from 2001 to 2003. Mr. M. Crawford became one of our directors in August 1997 and has served as President of Crawford Group, Inc. since 1995. Mr. E. Crawford is the father of Mr. M. Crawford.

 

Mr. Rutherford has been Vice President and Chief Financial Officer since joining us in July 2008. From 2007 until his employment with us, Mr. Rutherford served as Senior Vice President, Chief Financial Officer of UAP Holding Corp., an independent distributor of agricultural inputs and professional non-crop products. Mr. Rutherford previously served as President and Chief Executive Officer of Lesco, Inc., a provider of professional turf care products and a division of John Deere & Co., from 2005 to 2007, and as Lesco’s Chief Financial Officer from 2002 to 2005. From 1998 to 2002, he was the Senior Vice President, Treasurer and Chief Financial Officer of OfficeMax, Inc., an office products company. Prior to joining Office Max, he spent fourteen years with the accounting firm Arthur Andersen & Co.

 

Mr. Vilsack has been Secretary and General Counsel since joining us in 2002. From 1999 until his employment with us, Mr. Vilsack was engaged in the private practice of law. From 1997 to 1999, Mr. Vilsack was Vice President, General Counsel and Secretary of Medusa Corporation, a manufacturer of Portland cement, and prior to that he was Vice President, General Counsel and Secretary of Figgie International Inc., a manufacturing conglomerate.

 

Mr. Fogarty has been Director of Corporate Development since 1997 and served as Director of Finance from 1995 to 1997.

 

 

The Company’s common stock, par value $1.00 per share, trades on the Nasdaq Global Select Market under the symbol “PKOH”. The table below presents the high and low sales prices of the common stock during the periods presented. No dividends were paid during the five years ended December 31, 2010. There is no present intention to pay dividends. Additionally, the terms of the Company’s revolving credit facility and the indenture governing the Company’s 8.375% senior subordinated notes restrict the Company’s ability to pay dividends.

 

Quarterly Common Stock Price Ranges

 

 

The number of shareholders of record for the Company’s common stock as of February 25, 2011 was 588.

 

Issuer Purchases of Equity Securities

 

Set forth below is information regarding the Company’s stock repurchases during the fourth quarter of the fiscal year ended December 31, 2010.

 

 

 

 

 

(Dollars in thousands, except per share data)

 

 

 

 

 

 

 

No dividends were paid during the five years ended December 31, 2010.

 

Our consolidated financial statements include the accounts of Park-Ohio Holdings Corp. and its subsidiaries. All significant intercompany transactions have been eliminated in consolidation. The historical financial information discussed below is not directly comparable on a year-to-year basis, primarily due to a goodwill impairment charge in 2008, recording of a tax valuation allowance in 2008, restructuring and unusual charges in 2010, 2009 and 2008 and acquisitions in 2010 and 2008.

 

Executive Overview

 

We are an industrial Total Supply Management^tm and diversified manufacturing business, operating in three segments: Supply Technologies, Aluminum Products and Manufactured Products. Our Supply Technologies business provides our customers with Total Supply Management^tm, a proactive solutions approach that manages the efficiencies of every aspect of supplying production parts and materials to our customers’ manufacturing floor, from strategic planning to program implementation. Total Supply Management^tm includes such services as engineering and design support, part usage and cost analysis, supplier selection, quality assurance, bar coding, product packaging and tracking, just-in-time and point-of-use delivery, electronic billing services and ongoing technical support. The principal customers of Supply Technologies are in the heavy-duty truck, automotive and vehicle parts, electrical distribution and controls, consumer electronics, power sports/fitness equipment, HVAC, agricultural and construction equipment, semiconductor equipment, plumbing, aerospace and defense, and appliance industries. Aluminum Products casts and machines aluminum engine, transmission, brake, suspension and other components such as pump housings, clutch retainers/pistons, control arms, knuckles, master cylinders, pinion housings, brake calipers, oil pans and flywheel spacers for automotive, agricultural equipment, construction equipment, heavy-duty truck and marine equipment OEMs, primarily on a sole-source basis. Aluminum Products also provides value-added services such as design and engineering and assembly. Manufactured Products operates a diverse group of niche manufacturing businesses that design and manufacture a broad range of highly-engineered products including induction heating and melting systems, pipe threading systems, industrial oven systems, injection molded rubber components, and forged and machined products. Manufactured Products also produces and provides services and spare parts for the equipment it manufactures. The principal customers of Manufactured Products are OEMs, sub-assemblers and end users in the steel, coatings, forging, foundry, heavy-duty truck, construction equipment, bottling, automotive, oil and gas, rail and locomotive manufacturing and aerospace and defense industries. Sales, earnings and other relevant financial data for these three segments are provided in Note B to the consolidated financial statements, included elsewhere herein.

 

The domestic and international automotive markets were significantly impacted in 2008, which adversely affected our business units serving those markets. During the third quarter of 2008, the Company recorded asset impairment charges associated with the related volume declines and volatility in the automotive markets. The charges were composed of $.6 million of inventory impairment included in Cost of Products Sold and $17.5 million for impairment of property and equipment and other long-term assets. See Note O to the consolidated financial statements included elsewhere herein.

 

During the fourth quarter of 2008, the Company recorded a non-cash goodwill impairment charge of $95.8 million and restructuring and asset impairment charges of $13.4 million associated with the decision to exit its relationship with its largest customer, Navistar, along with the general economic downturn. The charges were composed of $5.0 million of inventory impairment included in Cost of Products Sold and $8.4 million for impairment of property and equipment, loss on disposal of a foreign subsidiary and severance costs. Impairment charges were offset by a gain of $.6 million recorded in the Aluminum Products segment relating to the sale of certain facilities that were previously written off.

 

During the fourth quarter of 2009, the Company recorded $7.0 million of asset impairment charges associated with general weakness in the economy including the railroad industry. The charges were

composed of $1.8 million of inventory impairment included in Cost of Products Sold and $5.2 million for impairment of property and equipment

 

In 2009, the Company recorded a gain of $6.3 million on the purchase of $15.2 million principal amount of Park-Ohio Industries, Inc. 8.375% senior subordinated notes due 2014 (the “8.375% Notes”). In 2008, the Company recorded a gain of $6.2 million on the purchase of $11.0 million principal amount of the 8.375% Notes.

 

During the third quarter of 2010, Supply Technologies completed the acquisition of certain assets and assumed specific liabilities relating to the ACS business of Lawson Products, Inc. for $16.0 million in cash and a $2.2 million subordinated promissory note payable in equal quarterly installments over three years. ACS is a provider of supply chain management solutions for a broad range of production components through its service centers throughout North America. The Company recorded a gain of $2.2 million representing the excess of the aggregate fair value of purchased net assets over the purchase price. See Note C to the consolidated financial statements included elsewhere herein.

 

On September 30, 2010, the Company entered a Bill of Sale with Rome Die Casting LLC (“Rome”), a producer of aluminum high pressure die castings, pursuant to which Rome agreed to transfer to the Company substantially all of its assets in exchange for approximately $7.5 million of notes receivable due from Rome held by the Company.

 

On December 31, 2010, the Company through its subsidiary, Ajax Tocco Magnethermic, acquired the assets and the related induction heating intellectual property of ABP Induction’s United States heating business operating as Pillar Induction (“Pillar”) for $9.9 million in cash. Pillar provides complete turnkey automated induction power systems and aftermarket parts and service to a worldwide market.

 

On March 8, 2010 and subsequently on August 31, 2010, we amended our revolving credit facility to, among other things, extend its maturity to April 30, 2014 and reduce the loan commitment from $270.0 million to $210.0 million, which amount includes the borrowing under a term loan A that is secured by real estate and machinery and equipment, and an unsecured term loan B. See Note G to the consolidated financial statements included elsewhere herein.

 

During the third quarter of 2010, the Company recorded an asset impairment charge of $3.5 million related to the writedown of one of its investments.

 

Approximately 24% of the Company’s consolidated net sales are to the automotive markets. In 2009, the Company recorded a charge of $4.2 million to fully reserve for the account receivable from Metaldyne resulting from its bankruptcy.

 

Results of Operations

 

2010 versus 2009

 

Net Sales by Segment:

 

 

Consolidated net sales increased $112.5 million to $813.5 million compared to $701.0 million in 2009 as the Company experienced volume increases in each segment. Supply Technologies sales increased 22% primarily due to volume increases in the heavy-duty truck industry, automotive, semi-conductor, power sports, HVAC, agricultural and construction equipment industries. In addition, there were $16.9 million of

sales resulting from the acquisition of the ACS business. These additions were offset by declines in the lawn and garden and medical industries. Aluminum Products sales increased 29% as volumes increased to customers in the auto industry along with additional sales from new contracts. In addition, there were $7.0 million of sales resulting from the acquisition of the Rome business. Manufactured Products sales increased 3% primarily from increases in the capital equipment and rubber products business units partially offset by declining volume in the forged and machined products business unit because of volume declines in the railroad industry. Approximately 24% of the Company’s consolidated net sales are to the automotive markets. Net sales to the automotive markets as a percentage of sales by segment were approximately 15%, 77% and 8% for the Supply Technologies, Aluminum Products and Manufactured Products Segments, respectively for the year ended December 31, 2010.

 

Cost of Products Sold & Gross Profit:

 

 

Cost of products sold increased $82.2 million in 2010 to $679.4 million compared to $597.2 million in 2009, primarily due to increases in sales volume, while gross margin increased to 16.5% in 2010 from 14.8% in the same period of 2009.

 

Supply Technologies and Aluminum Products gross margin increased resulting from volume increases while gross margin in the Manufactured Products segment remained essentially unchanged from the prior year.

 

Selling, General & Administrative (“SG&A”) Expenses:

 

 

Consolidated SG&A expenses increased $4.0 million to $91.8 million in 2010 compared to $87.8 million in 2009 representing a 120 basis point decrease in SG&A expenses as a percent of sales. SG&A expenses increased on a dollar basis in 2010 compared to 2009 primarily due to an increase in salaries and benefits levels resulting from restoration to 2008 salary levels along with a bonus accrual offset by a $4.2 million charge in 2009 for a reserve for an account receivable from a customer in bankruptcy and an increase in pension income.

 

Interest Expense:

 

 

Interest expense increased $.6 million in 2010 compared to 2009, primarily due to a higher average borrowing rate during 2010, offset by lower average borrowings. The decrease in average borrowings in

2010 resulted primarily from earnings and the reduction in working capital requirements. The higher average borrowing rate in 2010 was due primarily to increased interest rates under our revolving credit facility compared to 2009.

 

Impairment Charges:

 

During 2010, the Company reviewed one of its investments and determined there was diminution in value and therefore recorded an asset impairment charge of $3.5 million.

 

During 2009, the Company recorded asset impairment charges totaling $5.2 million associated with general weakness in the economy, including the railroad industry.

 

During 2008, the Company recorded goodwill impairment charges of $95.8 million. The Company also recorded asset impairment charges of $25.3 million associated with the volume declines and volatility in the automotive markets, loss from the disposal of a foreign subsidiary and restructuring expenses associated with the Company’s exit from its relationship with its largest customer, Navistar, along with realignment of its distribution network.

 

Gain on Purchase of 8.375% Senior Subordinated Notes:

 

In 2009, the Company recorded a gain of $6.3 million on the purchase for $8.9 million of $15.2 million aggregate principal amount of the 8.375% Notes due in 2014.

 

In 2008, the Company purchased $11.0 million aggregate principal amount of the 8.375% Notes for $4.7 million. After writing off $.1 million of deferred financing costs, the Company recorded a net gain of $6.2 million. The 8.375% Notes were not contributed to Park-Ohio Industries, Inc. in 2008 but were held by Holdings. During the fourth quarter of 2009, these notes were sold to a wholly-owned foreign subsidiary of Park-Ohio Industries, Inc.

 

Income Taxes:

 

 

The Company released $5.8 million of the valuation allowance attributable to continuing operations in 2010 compared to $1.8 million in 2009. In the fourth quarter of 2008, the Company recorded a $33.6 million valuation allowance against its net U.S. and certain foreign deferred tax assets. As of December 31, 2010 and 2009, the Company determined that it was not more likely than not that its net U.S. and certain foreign deferred tax assets would be realized.

 

The provision for income taxes was $2.0 million in 2010 compared to $(.8) million in 2009. The effective income tax rate was 11.6% in 2010, compared to 13% in 2009.

 

The Company’s net operating loss carryforward precluded the payment of most federal income taxes in both 2010 and 2009, and should similarly preclude such payments in 2011. At December 31, 2010, the Company had net operating loss carryforwards for federal income tax purposes of approximately $24.7 million, which will expire between 2023 and 2029.

2009 versus 2008

 

Net Sales by Segment:

 

 

Consolidated net sales declined $367.8 million to $701.0 million compared to $1,068.8 million in 2008 as the Company experienced volume declines in each segment resulting from the challenging global economic downturn. Supply Technologies sales decreased 37% primarily due to volume reductions in the heavy-duty truck industry, of which $83.0 million resulted from the Company’s decision to exit its relationship with its largest customer in the fourth quarter of 2008. The remaining sales reductions were due to the overall declining demand from customers in most end-markets partially offset by the addition of new customers. Aluminum Products sales decreased 29% as the general decline in auto industry sales volumes exceeded additional sales from new contracts starting production ramp-up. Manufactured Products sales decreased 33% primarily from the declining business environment in each of its business reporting units. Approximately 20% of the Company’s consolidated net sales are to the automotive markets. Net sales to the automotive markets as a percentage of sales by segment were approximately 8%, 83% and 5% for the Supply Technologies, Aluminum Products and Manufactured Products Segments, respectively for the year ended December 31, 2009.

 

Cost of Products Sold & Gross Profit:

 

 

Cost of products sold decreased $322.1 million in 2009 to $597.2 million compared to $919.3 million in 2008, primarily due to reduction in sales volume, while gross margin increased to 14.8% in 2009 from 14.0% in the same period of 2008.

 

Supply Technologies gross margin remained unchanged from the prior year, as increased product profitability improvements were offset by volume declines. Aluminum Products gross margin increased primarily due to cost cutting measures, a plant closure and improved efficiencies at another plant location. Gross margin in the Manufactured Products segment remained essentially unchanged from the prior year.

 

S, G & A Expenses:

 

Consolidated SG&A expenses decreased $17.7 million to $87.8 million in 2009 compared to $105.5 million in 2008 representing a 260 basis point increase in SG&A expenses as a percent of sales. SG&A expenses decreased on a dollar basis in 2009 compared to 2008 primarily due to employee workforce reductions, salary cuts, suspension of the Company’s voluntary contribution to its 401(k) defined contribution plan, less business travel and a reduction in volume of business offset by a reduction in pension income. SG&A expenses benefited in 2009 from a reduction of $3.6 million resulting from a second quarter change in our vacation benefit, which is now earned throughout the calendar year rather than earned in full at the beginning of the year, but was offset by a $4.2 million charge to fully reserve for an account receivable from a customer in bankruptcy.

 

Interest Expense:

 

 

Interest expense decreased $4.7 million in 2009 compared to 2008, primarily due to a lower average borrowing rate during 2009, lower average borrowings and the effect of the purchase of the 8.375% Notes. The decrease in average borrowings in 2009 resulted primarily from the reduction in working capital requirements. The lower average borrowing rate in 2009 was due primarily to decreased interest rates under our revolving credit facility compared to 2008.

 

Impairment Charges:

 

During 2009, the Company recorded asset impairment charges totaling $5.2 million associated with general weakness in the economy, including the railroad industry.

 

During 2008, the Company recorded goodwill impairment charges of $95.8 million. The Company also recorded asset impairment charges of $25.3 million associated with the volume declines and volatility in the automotive markets, loss from the disposal of a foreign subsidiary and restructuring expenses associated with the Company’s exit from its relationship with its largest customer, Navistar, along with realignment of its distribution network.

 

Gain on Purchase of 8.375% Senior Subordinated Notes:

 

In 2009, the Company recorded a gain of $6.3 million on the purchase for $8.9 million of $15.2 million aggregate principal amount of the 8.375% Notes due in 2014.

 

In 2008, the Company purchased $11.0 million aggregate principal amount of the 8.375% Notes for $4.7 million. After writing off $.1 million of deferred financing costs, the Company recorded a net gain of $6.2 million. The 8.375% Notes were not contributed to Park-Ohio Industries, Inc. in 2008 but were held by Holdings. During the fourth quarter of 2009, these notes were sold to a wholly-owned foreign subsidiary of Park-Ohio Industries, Inc.

Income Taxes:

 

 

In the fourth quarter of 2009, the Company released $1.8 million of the valuation allowance attributable to continuing operations. In the fourth quarter of 2008, the Company recorded a $33.6 million valuation allowance against its net U.S. and certain foreign deferred tax assets. As of December 31, 2009 and 2008, the Company determined that it was not more likely than not that its net U.S. and certain foreign deferred tax assets would be realized.

 

The provision for income taxes was $(.8) million in 2009 compared to $21.0 million in 2008. The effective income tax rate was 13% in 2009, compared to (21)% in 2008.

 

The Company’s net operating loss carryforward precluded the payment of most federal income taxes in 2010, 2009 and 2008. At December 31, 2009, the Company had net operating loss carryforwards for federal income tax purposes of approximately $38.5 million, which will expire between 2022 and 2029.

 

Liquidity and Sources of Capital

 

Our liquidity needs are primarily for working capital and capital expenditures. Our primary sources of liquidity have been funds provided by operations and funds available from existing bank credit arrangements and the sale of our senior subordinated notes. In 2003, we entered into a revolving credit facility with a group of banks which, as subsequently amended, matures at April 30, 2014 and, as amended, currently provides for availability of up to $170 million subject to an asset-based formula. We have the option to increase the availability under the revolving loan portion of the credit facility by $25.0 million. The revolving credit facility is secured by substantially all our assets in the United States and Canada. Borrowings from this revolving credit facility will be used for general corporate purposes.

 

On March 8, 2010 and subsequently on August 31, 2010, the revolving credit facility was amended to, among other things, extend its maturity date to April 30, 2014, reduce the loan commitment from $270.0 million to $210.0 million which includes a term loan A for $28.0 million ($25.9 million outstanding at December 31, 2010) that is secured by real estate and machinery and equipment and an unsecured term loan B for $12.0 million ($8.4 million outstanding at December 31, 2010). Amounts borrowed under the revolving credit facility may be borrowed at either (i) LIBOR plus 2.25% to 3.25% or (ii) the bank’s prime lending rate minus .25 to plus .75%, at the Company’s election. The LIBOR-based interest rate is dependent on the Company’s debt service coverage ratio, as defined in the revolving credit facility. Under the revolving credit facility, a detailed borrowing base formula provides borrowing availability to the Company based on percentages of eligible accounts receivable and inventory. Interest on the term loan A is at either (i) LIBOR plus 3.25% to 4.25% or (ii) the bank’s prime lending rate plus .75% to 1.75%, at the Company’s election. Interest on the term loan B is at either (i) LIBOR plus 5.25% to 6.25% or (ii) the bank’s prime lending rate plus 3.25% to 4.25%, at the Company’s election. The term loan A is amortized based on a ten-year schedule with the balance due at maturity. The term loan B is amortized over a two-year period plus 50% of debt service coverage excess capped at $3.5 million.

 

As of December 31, 2010, the Company had $124.5 million outstanding under the revolving credit facility, and approximately $44.6 million of unused borrowing availability.

 

Current financial resources (working capital and available bank borrowing arrangements) and anticipated funds from operations are expected to be adequate to meet current cash requirements for at least the next twelve months. The future availability of bank borrowings under the revolving loan

portion of the credit facility is based on the Company’s ability to meet a debt service ratio covenant, which could be materially impacted by negative economic trends. Failure to meet the debt service ratio could materially impact the availability and interest rate of future borrowings.

 

In 2009, the Company purchased $15.2 million aggregate principal amount of the 8.375% Notes for $8.9 million. After writing off $.1 million of deferred financing costs, the Company recorded a net gain of $6.3 million.

 

The Company may from time to time seek to refinance, retire or purchase its outstanding debt through cash purchases and/or exchanges for equity securities, in open market purchases, privately negotiated transactions or otherwise. It may also repurchase shares of its outstanding common stock. Any such actions will depend on prevailing market conditions, our liquidity requirements, contractual restrictions and other factors. The amounts involved may be material.

 

Disruptions, uncertainty or volatility in the credit markets may adversely impact the availability of credit already arranged and the availability and cost of credit in the future. These market conditions may limit the Company’s ability to replace, in a timely manner, maturing liabilities and access the capital necessary to grow and maintain its business. Accordingly, the Company may be forced to delay raising capital or pay unattractive interest rates, which could increase its interest expense, decrease its profitability and significantly reduce its financial flexibility.

 

At December 31, 2010, the Company’s debt service coverage ratio was 2.0, and, therefore, it was in compliance with the debt service ratio covenant contained in the revolving credit facility. The Company was also in compliance with the other covenants contained in the revolving credit facility as of December 31, 2010. The debt service coverage ratio is calculated at the end of each fiscal quarter and is based on the most recently ended four fiscal quarters of consolidated EBITDA minus cash taxes paid, minus unfunded capital expenditures, plus cash tax refunds to consolidated debt charges which are consolidated cash interest expense plus scheduled principal payments on indebtedness plus scheduled reductions in our term debt as defined in the revolving credit facility. The debt service coverage ratio must be greater than 1.0 and not less than 1.1 for any two consecutive fiscal quarters. While we expect to remain in compliance throughout 2011. Declines in sales volumes in 2011 could adversely impact our ability to remain in compliance with certain of these financial covenants. Additionally, to the extent our customers are adversely affected by declines in the economy is general, they may not be able to pay their accounts payable to us on a timely basis or at all, which would make the accounts receivable ineligible for purposes of the revolving credit facility and could reduce our borrowing base and our ability to borrow under such facility. We expect to remain in compliance throughout 2011.

 

The ratio of current assets to current liabilities was 2.28 at December 31, 2010 versus 2.75 at December 31, 2009. Working capital decreased by $3.5 million to $219.2 million at December 31, 2010 from $222.7 million at December 31, 2009. Accounts receivable increased $21.8 million to $126.4 million in 2010 from $104.6 million in 2009. Inventory increased by $10.4 million in 2010 to $192.5 million from $182.1 million in 2009 while accrued expenses increased by $20.3 million to $59.5 million in 2010 from $39.1 in 2009 and accounts payable increased $20.6 million to $95.7 million in 2010 from $75.1 million in 2009.

 

During 2010, the Company provided $67.1 million from operating activities as compared to providing $43.9 million in 2009. The increase in cash provision of $23.2 million was primarily the result of net income of $15.2 million in 2010 compared to a net loss of $5.2 million in 2009 (a change of $20.4 million) and net working capital decreases of $33.7 million in 2010 compared to $30.7 million in 2009 offset by a reduction in depreciation and amortization of $1.8 million in 2010 compared to 2009. During 2010, the Company also invested $4.0 million in capital expenditures and made acquisitions for $25.9 million in cash. These activities, plus cash interest and tax payments of $24.5 million, a reduction in borrowings of $19.9 million, purchase of treasury stock of $1.1 million and debt issue costs of $4.1 million resulted in an increase of cash of $12.2 million in 2010.

During 2009, the Company provided $43.9 million from operating activities as compared to providing $8.5 million in 2008. The increase in cash provision of $35.4 million was primarily the result of a decrease in net operating assets in 2009 compared to an increase in 2008 ($30.7 million compared to $(9.6) million, respectively) and a decrease in net loss of $114.6 million. The decrease in net loss was partially offset by approximately $5.2 million of noncash restructuring and impairment charges in 2009. During 2009, the Company also invested $5.6 million in capital expenditures, reduced its bank and other debt by $34.4 million, and purchased $.2 million of its common stock.

 

Off-Balance Sheet Arrangements

 

We do not have off-balance sheet arrangements, financing or other relationships with unconsolidated entities or other persons. There are occasions whereupon we enter into forward contracts on foreign currencies, primarily the euro, purely for the purpose of hedging exposure to changes in the value of accounts receivable in those currencies against the U.S. dollar. At December 31, 2010, none were outstanding. We currently have no other derivative instruments.

 

The following table summarizes our principal contractual obligations and other commercial commitments over various future periods as of December 31, 2010:

 

 

 

 

The table above excludes the liability for unrecognized income tax benefits disclosed in Note H to the consolidated financial statements included elsewhere herein, since the Company cannot predict with reasonable reliability, the timing of potential cash settlements with the respective taxing authorities.

 

We expect that funds provided by operations plus available borrowings under our revolving credit facility to be adequate to meet our cash requirements for at least the next twelve months.

 

Critical Accounting Policies and Estimates

 

Preparation of financial statements in conformity with U.S. generally accepted accounting principles requires management to make certain estimates and assumptions which affect amounts reported in our consolidated financial statements. Management has made their best estimates and judgments of certain amounts included in the financial statements, giving due consideration to materiality. We do not believe that there is great likelihood that materially different amounts would be reported under different conditions or using different assumptions related to the accounting policies described below. However,

application of these accounting policies involves the exercise of judgment and use of assumptions as to future uncertainties and, as a result, actual results could differ from these estimates.

 

Revenue Recognition:  The Company recognizes revenue, other than from long-term contracts, when title is transferred to the customer, typically upon shipment. Revenue from long-term contracts (approximately 11% of consolidated revenue) is accounted for under the percentage of completion method, and recognized on the basis of the percentage each contract’s cost to date bears to the total estimated contract cost. Revenue earned on contracts in process in excess of billings is classified in other current assets in the accompanying consolidated balance sheet. The Company’s revenue recognition policies are in accordance with the SEC’s Staff Accounting Bulletin (“SAB”) No. 104, “Revenue Recognition.”

 

Allowance for Doubtful Accounts:  Accounts receivable have been reduced by an allowance for amounts that may become uncollectible in the future. Allowances are developed by the individual operating units based on historical losses, adjusting for economic conditions. Our policy is to identify and reserve for specific collectibility concerns based on customers’ financial condition and payment history. The establishment of reserves requires the use of judgment and assumptions regarding the potential for losses on receivable balances.

 

Allowance for Obsolete and Slow Moving Inventory:  Inventories are stated at the lower of cost or market value and have been reduced by an allowance for obsolete and slow-moving inventories. The estimated allowance is based on management’s review of inventories on hand with minimal sales activity, which is compared to estimated future usage and sales. Inventories identified by management as slow-moving or obsolete are reserved for based on estimated selling prices less disposal costs. Though we consider these allowances adequate and proper, changes in economic conditions in specific markets in which we operate could have a material effect on reserve allowances required.

 

Impairment of Long-Lived Assets:  In accordance with Accounting Standards Codification (“ASC”) 360, “Property, Plant and Equipment”, management performs impairment tests of long-lived assets, including property and equipment, whenever an event occurs or circumstances change that indicate that the carrying value may not be recoverable or the useful life of the asset has changed. We reviewed our long-lived assets for indicators of impairment such as a decision to idle certain facilities and consolidate certain operations, a current-period operating or cash flow loss or a forecast that demonstrates continuing losses associated with the use of a long-lived asset and the expectation that, more likely than not, a long-lived asset will be sold or otherwise disposed of significantly before the end of its previously estimated useful life. When we identified impairment indicators, we determined whether the carrying amount of our long-lived assets was recoverable by comparing the carrying value to the sum of the undiscounted cash flows expected to result from the use and eventual disposition of the assets. We considered whether impairments existed at the lowest level of independent identifiable cash flows within a reporting unit (for example, plant location, program level or asset level). If the carrying value of the assets exceeded the expected cash flows, the Company estimated the fair value of these assets by using appraisals or recent selling experience in selling similar assets or for certain assets with reasonably predicable cash flows by performing discounted cash flow analysis using the same discount rate used as the weighted average cost of capital in the respective goodwill impairment analysis to estimate fair value when market information wasn’t available to determine whether an impairment existed. Certain assets were abandoned and written down to scrap or appraised value. During 2008, the Company recorded asset impairment charges of approximately $23.0 million, of which approximately $13.8 million was determined based on appraisals or scrap value and approximately $9.2 million was based on discounted cash flow analysis. The impact of a one percentage point change in the discount rate used in performing the discounted cash flow analysis would have been less than $1.0 million with respect to the asset impairment charges. In 2009, the Company recorded $7.0 million of asset impairment charges of which $5.2 million was based on appraisals and $1.8 million was based on other valuation methods. See Note O to the consolidated financial statements included elsewhere herein.

Restructuring:  We recognize costs in accordance with ASC 420, “Exit or Disposal Cost Obligations”. Detailed contemporaneous documentation is maintained and updated on a quarterly basis to ensure that accruals are properly supported. If management determines that there is a change in the estimate, the accruals are adjusted to reflect the changes.

 

Goodwill:  As required by ASC 350, “Intangibles — Goodwill and Other” (“ASC 350”), management performs impairment testing of goodwill at least annually as of October 1 of each year or more frequently if impairment indicators arise.

 

In accordance with ASC 350, management tests goodwill for impairment at the reporting unit level. A reporting unit is a reportable operating segment pursuant to ASC 280 “Segment Reporting”, or one level below the reportable operating segment (component level) as determined by the availability of discrete financial information that is regularly reviewed by operating segment management or an aggregate of component levels of a reportable operating segment having similar economic characteristics. Prior to our 2008 impairment analysis, we had four reporting units with recorded goodwill including Supply Technologies (included in the Supply Technologies Segment) with $64.6 million of goodwill, Engineered Specialty Products (included in the Supply Technology Segment) with $14.7 million of goodwill, Aluminum Products with $16.5 million of goodwill and Capital Equipment (included in the Manufactured Products segment) with $4.1 million of goodwill. At the time of goodwill impairment testing, management determined fair value of the reporting units through the use of a discounted cash flow valuation model incorporating discount rates commensurate with the risks involved for each reporting unit. If the calculated fair value is less than the carrying value, impairment of the reporting unit may exist. The use of a discounted cash flow valuation model to determine estimated fair value is common practice in impairment testing in the absence of available domestic and international transactional market evidence to determine the fair value. The key assumptions used in the discounted cash flow valuation model for impairment testing include discount rates, growth rates, cash flow projections and terminal value rates. Discount rates are set by using the weighted average cost of capital (“WACC”) methodology. The WACC methodology considers market and industry data as well as company-specific risk factors for each reporting unity in determining the appropriate discount rates to be used. The discount rate utilized for each reporting unit, which ranged from 12% to 18%, is indicative of the return an investor would expect to receive for investing in such a business. Operational management, considering industry and company-specific historical and projected data, develops growth rates and cash flow projections for each reporting unit. Terminal value rate determination follows common methodology of capturing the present value of perpetual cash flow estimates beyond the last projected period assuming a constant WACC and low long-term growth rates. The projections developed for the 2008 impairment test reflected managements’ view considering the significant market downturn during the fourth quarter of 2008. As an indicator that each reporting unit has been valued appropriately through the use of the discounted cash flow model, the aggregate fair value of all reporting units is reconciled to the market capitalization of the Company, which had a significant decline in the fourth quarter of 2008. We completed the annual impairment tests as of October 1, 2008 and updated these tests, as necessary, as of December 31, 2008. We concluded that all of the goodwill in three of the reporting units for a total of $95.8 million was impaired and written off in the fourth quarter of 2008. At December 31, 2008 the Company had remaining goodwill of $4.1 million in the Capital Equipment reporting unit. We completed the annual impairment tests as of October 1, 2009 and 2010 and concluded that no goodwill impairment existed. On September 30, 2010, the Company completed the acquisition of Rome and recorded goodwill of $4.6 million in the Aluminum Products reporting unit. On December 31, 2010, the Company completed the acquisition of Pillar and recorded additional goodwill of $.6 million in the Capital Equipment reporting unit.

 

Income Taxes:  In accordance with ASC 740, “Income Taxes” (“ASC 740”), the Company accounts for income taxes under the asset and liability method, whereby deferred tax assets and liabilities are determined based on temporary differences between the financial reporting and the tax bases of assets and liabilities and are measured using the currently enacted tax rates. Specifically, we measure gross deferred tax assets for deductible temporary differences and carryforwards, such as operating losses and

tax credits, using the applicable enacted tax rates and apply the more likely than not measurement criterion.

 

ASC 740 provides that future realization of the tax benefit of an existing deductible temporary difference or carryforward ultimately depends on the existence of sufficient taxable income of the appropriate character within the carryback, carryforward period available under the tax law. The Company analyzed the four possible sources of taxable income as set forth in ASC 740 and concluded that the only relevant sources of taxable income is the reversal of its existing taxable temporary differences. The Company reviewed the projected timing of the reversal of its taxable temporary differences and determined that such reversals will offset the Company’s deferred tax assets prior to their expiration. Accordingly, a valuation reserve was established against the Company’s domestic deferred tax assets net of its deferred tax liabilities (taxable temporary differences). See Note H to the consolidated financial statements included elsewhere herein.

 

Pension and Other Postretirement Benefit Plans:  We and our subsidiaries have pension plans, principally noncontributory defined benefit or noncontributory defined contribution plans and postretirement benefit plans covering substantially all employees. The measurement of liabilities related to these plans is based on management’s assumptions related to future events, including interest rates, return on pension plan assets, rate of compensation increases, and health care cost trends. Pension plan asset performance in the future will directly impact our net income. We have evaluated our pension and other postretirement benefit assumptions, considering current trends in interest rates and market conditions and believe our assumptions are appropriate.

 

Stock-Based Compensation:

 

ASC 718, “Compensation-Stock Compensation,” requires that the cost resulting from all share-based payment transactions be recognized in the financial statements and establishes a fair-value measurement objective in determining the value of such a cost and was effective as of January 1, 2006. The Company recorded expense related to stock-based compensation in 2010, 2009 and 2008 of $1.7 million, $2.4 million and $2.1 million (before tax), respectively.

 

Recent Accounting Pronouncements

 

Financial Accounting Standards Board (“FASB”) Accounting Standard Codification (“ASC”) Update (“ASU”) No. 2010-06 “Improving Disclosure about Fair Value Measurements”, requires enhanced disclosures about recurring and nonrecurring fair-value measurements including significant transfers in and out of Level 1 and Level 2 fair-value measurements and information on purchases, sales, issuances and settlements on a gross basis of Level 3 fair-value measurements. ASU No. 2010-06 was adopted January 1, 2010, except for the requirement to separately disclose purchases, sales, issuances and settlements of recurring Level 3 fair value measurements, which is effective January 1, 2011.

 

In October 2009, the FASB issued ASU No. 2009-13, “Multiple-Deliverable Revenue Arrangements,” which amends ASC Topic 605, “Revenue Recognition.” ASU No. 2009-13 amends the ASC to eliminate the residual method of allocation for multiple-deliverable revenue arrangements, and requires that arrangement consideration be allocated at the inception of an arrangement to all deliverables using the relative selling price method. The ASU also establishes a selling price hierarchy for determining the selling price of a deliverable, which includes: (1) vendor-specific objective evidence if available, (2) third-party evidence if vendor-specific objective evidence is not available, and (3) estimated selling price if neither vendor-specific nor third-party evidence is available. Additionally, ASU No. 2009-13 expands the disclosure requirements related to a vendor’s multiple-deliverable revenue arrangements. The Company is currently evaluating the potential impact, if any, of the adoption of this guidance on its Consolidated Financial Statements, which is effective for the Company on January 1, 2011.

 

In June 2009, the FASB issued guidance as codified in ASC 810-10, “Consolidation of Variable Interest Entities” (previously Statement of Financial Accounting Standards (“SFAS”) No. 167, “Amendments to FASB Interpretation No. 46(R)”). This guidance is intended to improve financial reporting by providing

additional guidance to companies involved with variable interest entities (“VIEs”) and by requiring additional disclosures about a company’s involvement with variable interest entities. This guidance is generally effective for annual periods beginning after November 15, 2009 and for interim periods within that first annual reporting period. The adoption of this guidance did not have a material impact on the financial statements of the Company.

 

Environmental

 

We have been identified as a potentially responsible party at third-party sites under the Comprehensive Environmental Response, Compensation and Liability Act of 1980, as amended, or comparable state laws, which provide for strict and, under certain circumstances, joint and several liability. We are participating in the cost of certain clean-up efforts at several of these sites. However, our share of such costs has not been material and based on available information, our management does not expect our exposure at any of these locations to have a material adverse effect on our results of operations, liquidity or financial condition.

 

We have been named as one of many defendants in a number of asbestos-related personal injury lawsuits. Our cost of defending such lawsuits has not been material to date and, based upon available information, our management does not expect our future costs for asbestos-related lawsuits to have a material adverse effect on our results of operations, liquidity or financial condition. We caution, however, that inherent in management’s estimates of our exposure are expected trends in claims severity, frequency and other factors that may materially vary as claims are filed and settled or otherwise resolved.

 

Seasonality; Variability of Operating Results

 

The timing of orders placed by our customers has varied with, among other factors, orders for customers’ finished goods, customer production schedules, competitive conditions and general economic conditions. The variability of the level and timing of orders has, from time to time, resulted in significant periodic and quarterly fluctuations in the operations of our business units. Such variability is particularly evident at the capital equipment businesses, included in the Manufactured Products segment, which typically ship a few large systems per year.

 

Forward-Looking Statements

 

This annual report on Form 10-K contains certain statements that are “forward-looking statements” within the meaning of Section 27A of the Securities Act and Section 21E of the Exchange Act. The words “believes”, “anticipates”, “plans”, “expects”, “intends”, “estimates” and similar expressions are intended to identify forward-looking statements. These forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause our actual results, performance and achievements, or industry results, to be materially different from any future results, performance or achievements expressed or implied by such forward looking statements. These factors include, but are not limited to the following: our substantial indebtedness; continuation of the current negative global economic environment; general business conditions and competitive factors, including pricing pressures and product innovation; demand for our products and services; raw material availability and pricing; component part availability and pricing; changes in our relationships with customers and suppliers; the financial condition of our customers, including the impact of any bankruptcies; our ability to successfully integrate recent and future acquisitions into existing operations; changes in general domestic economic conditions such as inflation rates, interest rates, tax rates, unemployment rates, higher labor and healthcare costs, recessions and changing government policies, laws and regulations, including the uncertainties related to the recent global financial crisis; adverse impacts to us, our suppliers and customers from acts of terrorism or hostilities; our ability to meet various covenants, including financial covenants, contained in the agreements governing our indebtedness; disruptions, uncertainties or volatility in the credit markets that may limit our access to capital; increasingly stringent domestic and foreign governmental regulations, including those affecting the environment; inherent uncertainties involved in assessing our potential liability for environmental remediation-related activities; the outcome of pending

and future litigation and other claims; our dependence on the automotive and heavy-duty truck industries, which are highly cyclical; the dependence of the automotive industry on consumer spending, which could be lower due to the effects of the current financial crisis; our ability to negotiate contracts with labor unions; our dependence on key management; our dependence on information systems; and the risk factors we describe under “Item 1A. Risk Factors”. Any forward-looking statement speaks only as of the date on which such statement is made, and we undertake no obligation to update any forward-looking statement, whether as a result of new information, future events or otherwise, except as required by law. In light of these and other uncertainties, the inclusion of a forward-looking statement herein should not be regarded as a representation by us that our plans and objectives will be achieved.

 

 

We are exposed to market risk including changes in interest rates. We are subject to interest rate risk on our floating rate revolving credit facility, which consisted of borrowings of $124.5 million at December 31, 2010. A 100 basis point increase in the interest rate would have resulted in an increase in interest expense of approximately $1.2 million for the year ended December 31, 2010.

 

Our foreign subsidiaries generally conduct business in local currencies. During 2010, we recorded an unfavorable foreign currency translation adjustment of $.7 million related to net assets located outside the United States. This foreign currency translation adjustment resulted primarily from weakening of the U.S. dollar. Our foreign operations are also subject to other customary risks of operating in a global environment, such as unstable political situations, the effect of local laws and taxes, tariff increases and regulations and requirements for export licenses, the potential imposition of trade or foreign exchange restrictions and transportation delays.

 

Our largest exposures to commodity prices relate to steel and natural gas prices, which have fluctuated widely in recent years. We do not have any commodity swap agreements, forward purchase or hedge contracts for steel but have entered into forward purchase contracts for a portion of our anticipated natural gas usage in 2011.

 

 

Index to Consolidated Financial Statements and Supplementary Financial Data

 

 

The Board of Directors and Shareholders of Park-Ohio Holdings Corp.

 

We have audited the accompanying consolidated balance sheets of Park-Ohio Holdings Corp. and subsidiaries as of December 31, 2010 and 2009, and the related consolidated statements of operations, shareholders’ equity and cash flows for each of the three years in the period ended December 31, 2010. Our audits also included the financial statement schedule listed in the Index at Item 15(a). These financial statements and schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and schedule based on our audits.

 

We conducted our audits in accordance with standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

 

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Park-Ohio Holdings Corp. and subsidiaries at December 31, 2010 and 2009 and the consolidated results of their operations and their cash flows for each of the three years in the period ended December 31, 2010 in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related financial statement schedule, when considered in relation to the basic financial statements taken as a whole, presents fairly in all material respects the information set forth therein.

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Park-Ohio Holdings Corp. and subsidiaries internal control over financial reporting as of December 31, 2010, based on criteria established in the Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated March 8, 2011 expressed an unqualified opinion thereon.

 

 

Cleveland, Ohio

March 8, 2011

 

The Board of Directors and Shareholders of Park-Ohio Holdings Corp.

 

We have audited Park-Ohio Holding Corp. and subsidiaries’ internal control over financial reporting as of December 31, 2010, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). Park-Ohio Holdings Corp. and subsidiaries’ management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.

 

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

 

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that: (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

In our opinion, Park-Ohio Holdings Corp. and subsidiaries maintained, in all material respects, effective internal control over financial reporting as of December 31, 2010, based on the COSO criteria.

 

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Park-Ohio Holdings Corp. and subsidiaries as of December 31, 2010 and 2009, and the related consolidated statements of operations, shareholders’ equity, and cash flows for each of the three years in the period ended December 31, 2010 of Park-Ohio Holdings Corp. and subsidiaries and our report dated March 8, 2011 expressed an unqualified opinion thereon.

 

 

Cleveland, Ohio

March 8, 2011

Park-Ohio Holdings Corp. and Subsidiaries

 

Consolidated Balance Sheets

 

 

 

See notes to consolidated financial statements.

Park-Ohio Holdings Corp. and Subsidiaries

 

Consolidated Statements of Operations

 

 

See notes to consolidated financial statements.

Park-Ohio Holdings Corp. and Subsidiaries

 

Consolidated Statements of Shareholders’ Equity