Edgar Filing: HURCO COMPANIES INC

Unassociated Document

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

x	Annual report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 for the fiscal year ended October 31, 2009 or

o	Transition report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 for the transition period from _________ to _________.

Commission File No. 0-9143

HURCO COMPANIES, INC.

(Exact name of registrant as specified in its charter)

Indiana	35-1150732
(State or other jurisdiction of	(I.R.S. Employer Identification Number)
incorporation or organization)
One Technology Way
Indianapolis, Indiana	46268
(Address of principal executive offices)	(Zip code)

Registrant’s telephone number, including area code (317) 293-5309

Securities registered pursuant to Section 12(b) of the Act:	None
Securities registered pursuant to Section 12(g) of the Act:	Common Stock, No Par Value
	(Title of Class)

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the

Securities Act. Yes o No x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or

Section 15(d). Yes o No x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months, and (2) has been subject to the filing requirements for at least the past 90 days. Yes x No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer or a non-

accelerated filer. See definition of “accelerated filer” and “large accelerated filer” in Rule 12b-2 of the Exchange Act.

Large accelerated filer o Accelerated filer x Non-accelerated filer o Smaller Reporting Company o

(Do not check if a smaller reporting company)

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the

Exchange Act). Yes o No x

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

Yes o No o

The aggregate market value of the registrant’s voting stock held by non-affiliates as of April 30, 2009 (the last day of our most recently completed second quarter) was $98,432,000.

The number of shares of the registrant’s common stock outstanding as of January 7, 2010 was 6,440,851.

DOCUMENTS INCORPORATED BY REFERENCE: Portions of the registrant’s Proxy Statement for its 2010 Annual Meeting of Shareholders (Part III).

Disclosure Concerning Forward-looking Statements

Certain statements made in this annual report on form 10-K may constitute “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. These forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause our actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. These factors include the risks identified in Item 1A.

PART I

Item1. BUSINESS

General

Hurco Companies, Inc. is an industrial technology company. We design, manufacture and sell computerized machine tools, consisting primarily of vertical machining centers (mills) and turning centers (lathes), to companies in the metal working industry through a worldwide sales, service and distribution network. Although our computer control systems and software products are proprietary, they predominantly use industry standard personal computer components. Our computer control systems and software products are primarily sold as integral components of our computerized machine tool products. As used in this report, the words “we”, “us” and “our” refer to Hurco Companies, Inc. and its consolidated subsidiaries.

Since our founding in 1968, we have been a leader in the introduction of interactive computer control systems that automate manufacturing processes and improve productivity in the metal parts manufacturing industry. We pioneered the application of microprocessor technology and conversational programming software for use in machine tools. We have concentrated on designing “user-friendly” computer control systems that can be operated by both skilled and unskilled machine tool operators and yet are capable of instructing a machine to perform complex tasks. The combination of microprocessor technology and patented interactive, conversational programming software in our computer control systems enables operators on the production floor to quickly and easily create a program for machining a particular part from a blueprint or computer aided design file and immediately begin machining that part.

Our executive offices and principal design and engineering operations are headquartered in Indianapolis, Indiana. Sales, application engineering and service subsidiaries are located in Mississauga, Canada; Shanghai and Guangzhou, China; High Wycombe, England; Paris, France; Munich, Germany; Chennai, India; Milan, Italy; Singapore; Benoni, South Africa and Bilbao, Spain, along with manufacturing operations in Taiwan and China. Products are sold through independent agents and distributors in North America, Europe and Asia. We also have direct sales forces in Canada, China, France, Germany, Italy, Poland, Singapore, South Africa, Spain, the United Kingdom and certain parts of the United States. Distribution facilities are located in Los Angeles, California, Venlo, the Netherlands, and Singapore.

Our strategy is to design, manufacture and sell a comprehensive line of computerized machine tools that incorporate our proprietary, interactive, computer control technology for the global metalworking market. Our technology is designed to enhance the machine tool user's productivity through ease of operation and higher levels of machine performance (speed, accuracy and surface finish quality). We use an open system software architecture that permits our computer control systems and software to be produced and employed using standard PC hardware. We have emphasized a “user-friendly” design that employs both interactive conversational and graphical programming software. Each year we have expanded our product offering to meet customer needs, which has led us to design and manufacture more complex machining centers with advanced capabilities. We bring a disciplined approach to strategically enter new geographic markets, as appropriate. Combined with a strong worldwide demand for machine tools, our introduction of new, technologically advanced products and expansion into new markets resulted in significant growth between the beginning of fiscal 2003 and the end of fiscal 2008. Since the beginning of fiscal 2009, that growth trend reversed as the global machine tool market was significantly impacted by the global recession.

Industry

Machine tool products are considered capital goods, which makes them part of an industry that has historically been highly cyclical.

Although, industry association data for the U.S. machine tool market is available, that market accounts for only 9% of worldwide consumption. Reports available for the U.S. machine tool market include:

United States Machine Tool Consumption – generated by the Association for Manufacturing Technology and American Machine Tool Distributor Association, this report includes metal cutting machines of all types and sizes, including segments in which we do not compete

Purchasing Manager’s Index - developed by the Institute for Supply Management and reports activity levels in U.S. manufacturing plants that purchase machine tools

Capacity Utilization of Manufacturing Companies – issued by the Federal Reserve Board

A limited amount of information for foreign markets is available, and different reporting methodologies are used by various countries. Machine tool consumption data published by Gardner Publications, Inc., calculates machine tool consumption annually by country. It is important to note that data for foreign countries is based on government reports that may lag 6 to 12 months and therefore is unreliable for forecasting purposes.

Demand for capital equipment can fluctuate significantly during periods of changing economic conditions as experienced at the beginning of fiscal 2009. Manufacturers and suppliers of capital goods, such as us, are often the first to experience these changes in demand. Additionally, since our order backlog is approximately 30 to 45 days, it is difficult to estimate demand with any reasonable certainty. Therefore, we do not have the benefit of relying on the common leading indicators that are available to many other industries for market analysis and forecasting purposes.

Products

Our core products consist of general purpose computerized machine tools for the metal cutting industry. These are, principally, vertical machining centers (mills) and turning centers (lathes), with which our proprietary software and computer control systems are fully integrated. We also produce computer control systems and related software for press brake applications that are sold as retrofit units for installation on existing or new press brake machines. Additionally, we produce and distribute software options, control upgrades, hardware accessories, and replacement parts for our machine tool product lines, and we provide operator training and support services to our customers.

The following table sets forth the contribution of each of our product groups to our total sales and service fees during each of the past three fiscal years:

Net Sales and Service Fees by Product Category
(Dollars in thousands)	Year ended October 31,
	2009				2008				2007
Continuing Products and Services
Computerized Machine Tools	$	75,213	82.7	%	$	199,238	89.0	%	$	165,832	88.2	%
Computer Control Systems and Software*		2,546	2.8	%		5,678	2.5	%		5,291	2.8	%
Service Parts		8,851	9.7	%		13,240	5.9	%		12,096	6.4	%
Service Fees		4,406	4.8	%		5,838	2.6	%		4,828	2.6	%
Total	$	91,016	100	%	$	223,994	100	%	$	188,047	100	%

*	Amounts shown do not include computer control systems sold as integrated components of computerized machine tools.

Computerized Machine Tools – Machining and Turning Centers

We design, manufacture and sell computerized machine tools equipped with a fully integrated interactive computer control system that features our WinMax® software. Our computer control system enables a machine tool operator to create complex two-dimensional or three-dimensional machining programs directly from an engineering drawing or computer aided design geometry file. An operator with little or no machine tool programming experience can successfully create a program with minimal training and begin machining the part in a short period of time. The control features an operator console with a liquid crystal display (LCD), and incorporates an upgradeable personal computer (PC) platform using a Pentium®* class processor with solid rendering graphical programming. In addition, WinMax® has a Windows®** based operating system to enable users to improve shop floor flexibility and software productivity.

Companies using computer controlled machine tools are better able to:

maximize the efficiency of their human resources

continue to expand their capability to make more advanced and complex parts from a wide range of materials using multiple processes

maintain the ability to incorporate fast moving changes in technology into their operations to keep their competitive edge

continue to integrate themselves into the global supply chain of their customers by supporting small to medium lot sizes for “just in time” initiatives

Our Windows®** based control facilitates our ability to meet these customer needs. The familiar Windows®** operating system coupled with our conversational style of program creation allows our customers’ operators to create and edit part-making programs without incurring the incremental overhead of specialized computer aided design and computer aided manufacturing programmers. With the ability to transfer most computer aided design data directly into a Hurco program, programming time becomes minutes instead of hours.

Products today are being designed to meet the demand for machining complex parts with greater part accuracies. Our proprietary controls with WinMax® software and Pentium®* processors efficiently handle the large amounts of data these complex part-making programs require, which enables our customers to create parts with superb accuracy at world-class speeds. We continue to add technology to our control design as it becomes available.

Our offering of machining centers, currently equipped with either a twin touch-screen console or a single touch-screen console, consists of the following six product lines:

VM Product Line

The VM product line consists of moderately priced vertical machining centers for the entry-level market. Their design premise of a machining center with a large work cube and a small footprint optimizes the use of available floor space. The VM line consists of five models in three sizes with X-axis (horizontal) travels of 26, 40, and 50 inches. The base prices of the VM machines range from $40,000 to $80,000.

VMX Product Line

The VMX product line consists of higher performing vertical machining centers aimed at manufacturers that require greater part accuracy. It is our flagship series of machining centers. The VMX line consists of fourteen models in seven sizes with X-axis travels of 24, 30, 40, 50, 60, 64, and 84 inches. The base prices of VMX machines range from $50,000 to $200,000.

Five-Axis Product Line

The five-axis product line is targeted at manufacturers seeking to produce complex multi-sided parts in a single setup. Machines in this product line can yield significant productivity gains for operations that previously processed each side of a part individually. Due to market demand for increased processing efficiency, we continued our focus on five-axis technology in fiscal 2009 and introduced two new five-axis machining centers. In total, we now have eight five-axis machining centers to offer customers. The base prices of the five-axis machines range from $100,000 to $250,000.

TM/TMM Product Line

Since its introduction in fiscal 2005, we have continued to expand the TM turning center (horizontal slant-bed lathe) product line. The TM series is designed for entry-level job shops and contract manufacturers seeking efficient processing of small to medium lot sizes. The TM is offered in three models with chucks of 6, 8, and 10 inches respectively. In September 2006, we further enhanced the capability of the TM turning centers with the addition of “live” or motorized tooling on the lathe turret. Designated as the TMM product line, these machines allow our customers to complete a number of secondary milling, drilling and tapping operations, while the part is still held in the chuck after the turning operations are complete. This ability to “mill/turn” or “multi-task” on the same machine in a single setup can provide significant productivity gains. We offer two TMM models with this capability. The base prices of the TM/TMM machines range from $40,000 to $100,000.

TMX Product Line

The TMX product line consists of high performance turning centers. We added one TMX model in 2009, which means we have four TMX models, three with chucks of 8 inches and one with a chuck of 10 inches. Two of the models are equipped with an additional axis and motorized live tooling, and one of those models has an additional spindle. The base prices of TMX turning centers range from $80,000 to $180,000.

Specialty Product Lines

This category includes three product series: the dual column DCX Series, the zone VTXZ Series, and the horizontal HTX Series. In 2009, we added a second machining center to the DCX Series. This 3-meter DCX32 machining center surpassed the DCX22 as the largest machining center we have ever made. The zone VTXZ machining center is designed for production flexibility. The VTXZ can work as a dual work zone machine to support continuous production or a single zone to produce long, structural parts. Both the DCX Series and VTXZ Series are designed to facilitate production of large parts and molds often required by the aerospace and energy industries. The horizontal machining center (HTX) is also included in this category as it facilitates efficient and accurate machining of complex production parts. The base prices of these machines range from $235,000 to $350,000.

*Pentium® is a registered trademark of Intel Corporation.

**Windows® is a registered trademark of Microsoft Corporation.

Computer Control Systems and Software

The following machine tool computer control systems and software products are sold directly to end-users and/or to original equipment manufacturers.

Autobend®

Autobend® computer control systems are applied to metal bending press brake machines that form parts from sheet metal and steel plate. They consist of a microprocessor-based computer control and back gauge (an automated gauging system that determines where the bend will be made). We have manufactured and sold the Autobend® product line since 1968. We currently market two models of our Autobend® computer control systems for press brake machines, in combination with six different back gauges, through distributors to end-users as retrofit units for installation on existing or new press brake machines, as well as to original equipment manufacturers and importers.

Software Products

In addition to our standard computer control features, we offer software option products for two-dimensional and three-dimensional programming. These products are sold to users of our computerized machine tools equipped with our twin touch-screen or single touch-screen consoles featuring WinMax® control software. The options include: Swept Surface, SelectSurface Finish Quality (SFQ), DXF Transfer, UltiNetTM, UltiPocketTM, Conversational Part and Tool Probing, Advanced Verification Graphics, and Simultaneous Five-Axis Contouring.

Our Swept Surface software option simplifies programming of 3D contours and significantly reduces programming time. SelectSurface Finish Quality (SFQ) lets the customer control surface finish quality and run time in one easy step.

The DXF Transfer software option can substantially increase operator productivity because it eliminates manual data entry of part features by transferring AutoCADTM drawing files directly into the our computer control or into our desktop programming software, WinMax® Desktop.

UltiNetÔ is a networking software option used by our customers to transfer part design and manufacturing information to computerized machine tools at high speeds and to network computerized machine tools within the customer's manufacturing facility.

UltiPocketTM automatically calculates the tool path around islands, eliminating the arduous task of plotting these shapes. Islands can also be rotated, scaled and repeated.

Conversational Part and Tool Probing options permit the computerized dimensional measurement of machined parts and the associated cutting tools. This “on-machine” technique improves the throughput of the measurement process when compared to traditional “off-machine” approaches.

The Advanced Verification Graphics feature significantly reduces both scrap and programming time because it provides customers with a three-dimensional solid rendering of the part, including dynamic rotation. This feature allows a customer to view the rendered part from any angle without needing to redraw it.

Simultaneous five-axis contouring software enables a five-axis machine to command motion concurrently on all axes. This allows the user to create continuous tool-paths along complex geometries with only a single machine/part setup, providing increased productivity along with the performance benefits of using shorter cutting tools. The sale of simultaneous five-axis contouring software is subject to governmental licensing.

Parts and Service

Our service organization provides installation, warranty, operator training and customer support for our products on a worldwide basis. In the United States, our principal distributors have primary responsibility for machine installation and warranty service and support for product sales. Our service organization also sells software options, computer control upgrades, accessories and replacement parts for our products. Our after-sales parts and service business strengthens our customer relationships and provides continuous information concerning the evolving requirements of end-users.

Manufacturing

Our computerized metal cutting machine tools are manufactured to our specifications primarily by our wholly owned subsidiary in Taiwan, Hurco Manufacturing Limited (HML). HML conducts final assembly operations and is supported by a network of contract suppliers of components and sub-assemblies who manufacture components for our products in accordance with our proprietary designs, quality standards and cost specifications. This has enabled us to lower our production costs, reduce our working capital per sales dollar and adjust our worldwide manufacturing capacity without significant incremental investment in capital equipment or personnel. Our manufacturing facility in Ningbo, China, focuses on the machining of castings to support HML’s production in Taiwan. In the fourth quarter of fiscal 2009, we expanded the Ningbo facility to produce VM and TM machines specifically for the Chinese market.

We have a contract manufacturing agreement for computer control systems with Hurco Automation, Ltd., a Taiwanese company in which we have a 35% ownership interest. This company produces all of our computer control systems to our specifications, sources industry standard computer components and our proprietary parts, performs final assembly and conducts test operations.

We work closely with our subsidiaries, key component suppliers and our minority-owned affiliate to ensure that their production capacity will be sufficient to meet the projected demand for our machine tool products. Many of the key components used in our machines can be sourced from multiple suppliers. However, any prolonged interruption of operations or significant reduction in the capacity or performance capability at any of our manufacturing facilities, or at any of our key component suppliers, could have a material adverse effect on our operations.

Marketing and Distribution

We sell our products through more than 100 independent agents and distributors throughout North America, Europe and Asia. Although some distributors carry competitive products, we are the primary line for the majority of our distributors globally. We also have direct sales personnel in Canada, China, France, Germany, Italy, Poland, Singapore, South Africa, Spain, the United Kingdom and certain parts of the United States, which are among the world's principal machine tool consuming markets.

Approximately 91% of the worldwide demand for computerized machine tools and computer control systems is outside the United States. In fiscal 2009, more than 70% of our revenues were from overseas customers. No single end-user or distributor of our products accounted for more than 5% of our total sales and service fees.

The end-users of our products are precision tool, die and mold manufacturers, independent metal parts manufacturers, and specialized production application or prototype departments within large manufacturing companies. Industries served include aerospace, defense, medical equipment, energy, automotive/transportation, electronics and computer equipment.

We also sell our AutobendÒ computer control systems to original equipment manufacturers of new metal fabrication machine tools who integrate them with their own products prior to the sale of those products to their own customers, to retrofitters of used metal fabrication machine tools who integrate them with those machines as part of the retrofitting operation, and to end-users who have an installed base of metal fabrication machine tools, either with or without related computer control systems.

Demand

We believe demand for our products is driven by advances in industrial technology and the related demand for automated process improvements.

Other factors affecting demand include:

the need to continuously improve productivity and shorten cycle time

an aging machine tool installed base that will require replacement with more advanced and efficient technology created by shorter product life cycles

the industrial development of emerging markets in Asia and Eastern Europe

the declining supply of skilled machinists

Demand for our products is also highly dependent upon economic conditions and the general level of business confidence, as well as such factors as production capacity utilization and changes in governmental policies regarding tariffs, corporate taxation, and other investment incentives. For additional information regarding current economic conditions and their impact on our results of operation and financial condition, refer to Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Competition

We compete with many other machine tool producers in the United States and foreign countries. Most of our competitors are larger and have greater financial resources than our company. In the United States and European metal cutting markets, major competitors include Haas Automation, Inc., Daewoo, Miltronics, Deckel Maho Gildemeister Group (DMG), Hardinge Inc. and MAG Industrial Automation Systems. There are also a large number of other foreign manufacturers, including Okuma Machinery Works Ltd., Mori Seiki Co., Ltd., Mazak and Matsuura Machinery Corporation.

We strive to compete effectively by incorporating into our products unique, patented software and other proprietary features that offer enhanced productivity, technological capabilities and ease of use. We offer our products in a range of prices and capabilities to target a broad potential market. We also believe that our competitiveness is aided by our reputation for reliability and quality, our strong international sales and distribution organization, and our extensive customer service organization.

Intellectual Property

We consider our products to be proprietary. Various features of our control systems and machine tools employ technologies covered by patents that are material to our business. We also own additional patents covering new technologies that we have acquired or developed, and that we are planning to incorporate into our control systems in the future.

Research and Development

In the fiscal years set forth below, non-capitalized research and development expenditures for new products and significant product improvements and expenditures related to software development projects that were capitalized were as follows (in thousands):

Fiscal Year	Non-capitalized research and development		Capitalized software development
2009	$	2,500	$	2,000
2008		3,000		900
2007		3,100		1,200

Employees

We had approximately 390 full-time employees at the end of fiscal 2009, none of whom were covered by a collective-bargaining agreement or represented by a union. We have experienced no employee-generated work stoppages or disruptions and we consider our employee relations to be satisfactory.

Geographic Areas

Financial information about geographic areas in which we sell our products is set forth in Note 15 of Notes to Consolidated Financial Statements.

The risks of doing business on a global basis are set forth in Item 1A. Risk Factors below.

Backlog

For information on orders and backlog, see Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Availability of Reports and Other Information

Our website is www.hurco.com. We make available on this website, free of charge, access to our annual, quarterly and current reports and other documents filed by us with the Securities and Exchange Commission (SEC) as soon as reasonably practical after the filing date. These reports can also be obtained at the SEC’s Public Reference Room at 100 F Street, NE Washington, DC 20549.

Item 1A. RISK FACTORS

In this section we describe what we believe to be the material risks related to our business. The risks and uncertainties described below or elsewhere in this report are not the only ones to which we are exposed. Additional risks and uncertainties not presently known and/or risks we currently deem immaterial may also adversely affect our business and operations. If any of the developments included in the following risks were to occur, our business, financial condition, results of operations, cash flows or prospects could be materially adversely affected.

The current global economic crisis is adversely affecting overall demand and our customers’ ability to purchase our products and services.

The recent global economic crisis and the overall decline in economic activity severely impacted banks and other lenders, limiting the ability of many businesses, including our customers, to access the credit markets. For additional information regarding current economic conditions and their impact on our results of operations and financial condition, refer to Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

The cyclical nature of our business causes fluctuations in our operating results.

The machine tool industry is highly cyclical and changes in demand can occur abruptly in the geographic markets we serve. As a result of this cyclicality, we have experienced significant fluctuations in our sales, which, in periods of reduced demand have adversely affected our results of operations and financial condition.

Our international operations pose additional risks that may adversely impact sales and earnings.

During fiscal 2009, more than 70% of our revenues were derived from sales to customers located outside the United States. In addition, our manufacturing facilities are located outside of the United States. Our international operations are subject to a number of risks, including:

trade barriers

regional economic uncertainty

differing labor regulation

governmental expropriation

domestic and foreign customs and tariffs

current and changing regulatory environments affecting the importation and exportation of products and raw materials

difficulty in obtaining distribution support

difficulty in staffing and managing widespread operations

differences in the availability and terms of financing

political instability and unrest

changes in tax regulations and rates in foreign countries

Quotas, tariffs, taxes or other trade barriers could require us to change manufacturing sources, reduce prices, increase spending on marketing or product development, withdraw from or not enter certain markets or otherwise take actions that could be adverse to us. Also, in some foreign jurisdictions, we may be subject to laws limiting the right and ability of entities organized or operating therein to pay dividends or remit earnings to affiliated companies unless specified conditions are met. These factors may adversely affect our future operating results. The vast majority of our products are shipped from our manufacturing facility in Taiwan from the Port of Taichung to three ports of destination: Los Angeles, California, Venlo, the Netherlands, and Singapore. Changes in customs requirements, as a result of national security or other constraints put upon these ports, may also have an adverse impact on our results of operations.

We depend on limited sources for our products.

Our wholly owned subsidiary in Taiwan, Hurco Manufacturing Ltd. (HML) produces the vast majority of our machine tools. Unplanned interruption in manufacturing at HML would have a material adverse effect on our results of operations and financial condition. Interruption in manufacturing at HML could result from a change in the political environment in Taiwan or a natural disaster, such as an earthquake, typhoon, or tsunami. Any interruption in service by one of our key component suppliers could also have a material adverse effect on our results of operations and financial condition.

Fluctuations in the exchange rates between the U.S. Dollar and any of several foreign currencies can increase our costs and decrease our revenues.

Our international sales divisions generate more than 70% of our revenues, which are invoiced and received in several foreign currencies, primarily the Euro and Pound Sterling. Therefore, our results of operations and financial condition are affected by fluctuations in exchange rates between these currencies and the U.S. Dollar, both for purposes of actual conversion and for financial reporting purposes. In addition, our exchange risk associated with our product purchases primarily relates to the New Taiwan Dollar. We hedge our foreign currency exposure with the purchase of forward exchange contracts. Hedge contracts only mitigate the impact of changes in foreign currency rates that occur during the term of the related hedge contract period. Refer to Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations and Note 1 of Notes to Consolidated Financial Statements for the impact of translation of foreign currencies and hedging on our consolidated financial statements.

Our competitive position and prospects for growth may be diminished if we are unable to develop and introduce new and enhanced products on a timely basis that are accepted in the market.

The machine tool industry is subject to technological change, evolving industry standards, changing customer requirements, and improvements in and expansion of product offerings. Our ability to anticipate changes in technology, industry standards, customers’ requirements and competitors’ product offerings and to develop and introduce new and enhanced products on a timely basis that are accepted in the market, will be significant factors in maintaining and improving our competitive position and growth prospects. If the technologies or standards used in our products become obsolete or fail to gain widespread commercial acceptance, our business would be materially adversely affected. Although we believe that we have the technological capabilities to remain competitive, developments by others may render our products or technologies obsolete or noncompetitive.

We compete with larger companies that have greater financial resources, and our business could be harmed by competitors’ actions.

The markets in which our products are sold are extremely competitive and highly fragmented. In marketing our products, we compete with other manufacturers in terms of quality, reliability, price, value, delivery time, service and technological characteristics. We compete with a number of U.S., European and Asian competitors, most of which are larger, have substantially greater financial resources and are supported by governmental or financial institution subsidies. While we believe our product lines compete effectively, our financial resources are limited compared to those of most of our competitors, making it challenging to remain competitive.

Fluctuations in the price of raw materials, especially steel and iron, could adversely affect our sales, costs and profitability.

We manufacture products with a high iron and steel content for which worldwide prices can change significantly. The availability and price for these and other raw materials are subject to volatility due to worldwide supply and demand forces, speculative actions, inventory levels, exchange rates, production costs and anticipated or perceived shortages. In some cases, those cost increases can be passed on to customers in the form of price increases; in other cases they cannot. If the prices of raw materials increase and we are not able to charge our customers higher prices to compensate, our results of operations would be adversely affected.

Due to future changes in technology, changes in market demand, or changes in market expectations, portions of our inventory may become obsolete or excess.

The technology within our products changes and generally new versions of machines are brought to market, in three to five year cycles. The phasing out of an old product involves estimating the amount of inventory to hold to satisfy the final demand for those machines and to satisfy future repair part needs. Based on changing customer demand and expectations of delivery times for repair parts, we may find that we have either obsolete or excess inventory on hand. Because of unforeseen future changes in technology, market demand or competition, we might have to write off unusable inventory, which would adversely affect our results of operations.

We may make acquisitions that could disrupt our operations and harm our operating results.

Although we have no current plans for any material acquisitions, we may seek to expand our product offerings or the markets we serve by acquiring other companies, product lines, technologies and personnel. Acquisitions involve numerous risks, including the following:

difficulties integrating the operations, technologies, products, and personnel of the acquired companies

diversion of management’s attention from normal daily operations of the business

potential difficulties completing projects associated with in-process research and development

difficulties entering markets in which we have no or limited prior experience, especially when competitors in such markets have stronger market positions

initial dependence on unfamiliar supply chains or relatively small supply partners

insufficient revenues to offset increased expenses associated with acquisitions

the potential loss of key employees of the acquired companies

Acquisitions may also cause us to:

issue common stock that would dilute our current shareholders’ percentage ownership

assume liabilities

record goodwill and non-amortizable intangible assets that will be subject to impairment testing on a regular basis and potential periodic impairment charges

incur amortization expenses related to certain intangible assets

incur large and immediate write-offs, and restructuring and other related expenses

become subject to litigation

Mergers and acquisitions are inherently risky. No assurance can be given that our acquisitions will be successful. Further, no assurance can be given that acquisitions will not adversely affect our business, operating results, or financial condition. Failure to manage and successfully integrate acquisitions could harm our business and operating results in a material way. Even when an acquired company has already developed and marketed products, there can be no assurance that product enhancements will be made in a timely manner or that pre-acquisition due diligence will identify all possible issues that might arise with respect to such products.

Risks related to new product development also apply to acquisitions. For additional information, please see the risk factor above entitled, “Due to future changes in technology, changes in market demand, or changes in market expectations, portions of our inventory may become obsolete or excess.”

Assets may become impaired, requiring us to record a significant charge to earnings.

We review our assets for indications of impairment when events or changes in circumstances indicate the carrying value may not be recoverable. We could be required to record a significant charge to earnings in our financial statements for the period in which any impairment of these assets is determined, which would adversely affect our results of operations for that period.

Our continued success depends on our ability to protect our intellectual property.

Our future success depends in part upon our ability to protect our intellectual property. We rely principally on nondisclosure agreements, other contractual arrangements, trade secret law, trademark registration and patents to protect our intellectual property. However, these measures may be inadequate to protect our intellectual property from infringement by others or prevent misappropriation of our proprietary rights. In addition, the laws of some foreign countries do not protect proprietary rights to the same extent as do U.S. laws. Our inability to protect our proprietary information and enforce our intellectual property rights through infringement proceedings could have a material adverse effect on our business, financial condition and results of operations.

The unplanned loss of current members of our senior management team and other key personnel may adversely affect our operating results.

The unexpected loss of senior management or other key personnel could impair our ability to carry out our business plan. We believe that our future success will depend in part on our ability to attract and retain highly skilled and qualified personnel. The loss of senior management or other key personnel may adversely affect our operating results as we incur costs to replace the departed personnel and potentially lose opportunities in the transition of important job functions.

Item 1B. UNRESOLVED STAFF COMMENTS

None.

Item 2. PROPERTIES

The following table sets forth the principal use, location, and size of each of our facilities:

Principal Uses	Locations	Square Footage
Corporate headquarters, design and engineering, product testing, sales and marketing, application engineering and customer service.	Indianapolis, Indiana, USA (1)	165,000

Manufacturing	Taichung, Taiwan	229,000
	Ningbo, China	34,700

Sales, design engineering, product testing and customer service.	Dexter, Michigan, USA	3,000

Sales, application engineering & customer service.	Mississauga, Canada High Wycombe, England	3,600 12,000
	Benoni, South Africa	2,500
	Paris and Toulouse France	11,100
	Munich, Hagen and Roedermark, Germany	26,000
	Milan and Venice, Italy	13,000
	Bilbao, Spain	3,500
	Singapore	6,300
	Shanghai, China	8,000
	Guangzhou, China	4,700
	Chennai, India	5,400
	Liegnitz, Poland	2,900
	Grand Rapids, Michigan, USA	5,000

Warehouse, distribution, sales, application engineering and customer service	Los Angeles, California, USA	13,000

(1)

Approximately 50,000 square feet is leased to a third-party under a lease, which expires October 31, 2011.

We own the Indianapolis facility and lease all other facilities. The leases have terms expiring at various dates ranging from January 2010 to May 2017. We believe that all of our facilities are well maintained and are adequate for our needs now and in the foreseeable future. We do not believe that we would experience any difficulty in replacing any of the present facilities if any of our leases were not renewed at expiration.

Item 3. LEGAL PROCEEDINGS

We are involved in various claims and lawsuits arising in the normal course of business. We do not expect any of these claims, individually or in the aggregate, to have a material adverse effect on our financial position or results of operations.

Item 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

None.

Executive Officers of the Registrant

Executive officers are elected each year by the Board of Directors at the first board meeting following the Annual Meeting of Shareholders to serve during the ensuing year and until their respective successors are elected and qualified. There are no family relationships between any of our executive officers or between any of them and any of the members of the Board of Directors.

The following information sets forth as of December 31, 2009, the name of each executive officer and his or her age, tenure as an officer, principal occupation and business experience for the last five years:

Name	Age	Position(s) with the Company
Michael Doar	54	Chairman of the Board, Chief Executive Officer and President
John G. Oblazney	41	Vice President, Secretary, Treasurer and Chief Financial Officer
Sonja K. McClelland	38	Corporate Controller, Assistant Secretary

Michael Doar was elected Chairman of the Board and Chief Executive Officer on November 14, 2001, and, upon the resignation of Jim Fabris as President, effective October 31, 2009, Mr. Doar was elected to fill that office. Mr. Doar had held various management positions with Ingersoll Milling Machine Company from 1989 until 2001. Mr. Doar has been a director of Hurco since 2000.

John G. Oblazney was elected Vice President, Secretary, Treasurer and Chief Financial Officer in September 2006. Prior to joining us, Mr. Oblazney served as the Chief Financial Officer of Carrier Corporation’s Light Commercial Business, a division of United Technologies Corporation, since December 2005. Prior to that, Mr. Oblazney served in various other financial positions with Carrier Corporation from 2000 to 2005. Prior to joining Carrier Corporation, Mr. Oblazney was employed for six years with Cooper Industries and employed for three years by an international public accounting firm.

Sonja K. McClelland has been employed by us since September 1996 and was elected Corporate Controller, Assistant Secretary in November 2004. Ms. McClelland served as Corporate Accounting Manager from September 1996 to 1999, then as Division Controller for Hurco USA from September 1999 to November 2004. Prior to joining us, Ms. McClelland was employed for three years by an international public accounting firm.

PART II

Item 5. MARKET FOR THE REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Our common stock is traded on the Nasdaq Global Select Market under the symbol “HURC”. The following table sets forth the high and low sale prices of the shares of our common stock for the periods indicated, as reported by the Nasdaq Global Select Market.

	2009				2008
Fiscal Quarter Ended:	High		Low		High		Low
January 31	$	24.68	$	11.81	$	58.68	$	30.24
April 30		16.97		8.30		52.12		33.41
July 31		19.89		12.01		49.30		23.11
October 31		20.45		15.26		38.24		16.92

On January 7, 2010, the closing price of our common stock on the Nasdaq Global Select Market was $18.30

We do not currently pay dividends on our common stock and intend to continue to retain earnings for working capital, and capital expenditures.

There were 182 holders of record of our common stock as of January 7, 2010.

During the period covered by this report, we did not sell any equity securities that were not registered under the Securities Act of 1933, as amended.

The disclosure under the caption “Equity Compensation Plan Information” is included in Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.

Item 6. SELECTED FINANCIAL DATA

The Selected Financial Data presented below has been derived from our consolidated financial statements for the years indicated and should be read in conjunction with the consolidated financial statements and related notes set forth elsewhere herein and Management’s Discussion and Analysis of Financial Condition and Results of Operations.

	Year Ended October 31
	2009			2008			2007		2006		2005
Statement of Operations Data:	(Dollars in thousands, except per share amounts)
Sales and service fees	$	91,016		$	223,994		$	188,047	$	148,517	$	125,509
Gross profit		25,828			82,617			71,082		53,325		42,558
Selling, general and administrative expenses		30,874			46,811			40,124		30,697		26,057
Operating income (loss)		(5,046	)		35,806			30,958		22,628		16,501
Other income (expense)		1,234			(1,640	)		1,742		745		(64	)
Net income (loss)		(2,321	)		22,520			20,889		15,479		16,443
Earnings (loss) per common share- diluted		(0.36	)		3.49			3.24		2.42		2.60
Weighted average common shares outstanding-diluted		6,429			6,444			6,440		6,397		6,336

	As of October 31
	2009		2008		2007		2006		2005
Balance Sheet Data:	(Dollars in thousands)
Current assets	$	118,264	$	151,312	$	139,265	$	103,434	$	73,818
Current liabilities		20,807		51,129		63,215		44,340		30,761
Working capital		97,457		100,183		76,050		59,094		43,057
Current ratio		5.7		3.0		2.2		2.3		2.4
Total assets		144,743		177,444		163,781		125,545		94,114
Non-current liabilities		3,560		2,838		2,963		5,830		4,409
Total debt		—		—		—		4,010		4,136
Shareholders’ equity		120,376		123,477		97,603		75,375		58,944

Item 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

EXECUTIVE OVERVIEW

Hurco Companies, Inc. is an industrial technology company operating in a single segment. We design and produce computerized machine tools, featuring our proprietary computer control systems and software, for sale through our own distribution network to the worldwide metal cutting market. We also provide software options, control upgrades, accessories and replacement parts for our products, as well as customer service and training support.

The following overview is intended to provide a brief explanation of the principal factors that have contributed to our financial performance. This overview is intended to be read in conjunction with the more detailed information that follows and our audited financial statements that appear elsewhere in this report.

We experienced significant growth in our sales and earnings between the beginning of fiscal 2003 and the end of fiscal 2008. The primary drivers of this growth were the strong worldwide demand for machine tools during that period, the expansion of our product line to include higher-price and higher-margin products, increased customer acceptance of our products, and the strength of our selling and manufacturing operations outside the United States. Our operational performance for fiscal 2009 was adversely affected by the recent global economic recession and its impact on our customers’ ability to attain credit combined with their cautious attitude about future growth opportunities.

The market for machine tools is international in scope. We have both significant foreign sales and foreign manufacturing operations. During fiscal 2008, more than 75% of our revenues were attributable to customers located abroad. That percentage decreased to approximately 70% in fiscal 2009, due primarily to deterioration of the European and Asian markets for machine tool products as a result of the recent global recession. We sell our products through more than 100 independent agents and distributors in countries throughout North America, Europe and Asia. We also have our own direct sales and service organizations in Canada, China, France, Germany, Italy, Poland, Singapore, South Africa, Spain, the United Kingdom, and certain areas of the United States. The vast majority of our machine tools are manufactured in Taiwan to our specifications by our wholly owned subsidiary, Hurco Manufacturing Limited (HML). Machine castings and components to support HML’s production are manufactured at our facility in Ningbo, China. We also manufacture machine tools for the Chinese market at the Ningbo plant.

Our sales to foreign customers are denominated, and payments by those customers are made, in the prevailing currencies—primarily the Euro and Pound Sterling—in the countries in which those customers are located. Our product costs are incurred and paid primarily in the New Taiwan Dollar and the U.S. Dollar. Changes in currency exchange rates may have a material effect on our operating results and consolidated balance sheets as reported under the U.S. Generally Accepted Accounting Principles. For example, when the U.S. Dollar strengthens in value relative to a foreign currency, as has been the case since the beginning of fiscal 2009, sales made, and expenses incurred, in that currency when translated to U.S. Dollars for reporting in our financial statements, are lower than would be the case when the U.S. Dollar is weaker. In our comparison of period-to-period results, we discuss the effect of currency translation on those results including the increases or decreases in those results as reported in our financial statements (which reflect translation to U.S. Dollars at exchange rates prevailing during the period covered by those financial statements) and also the effect that changes in exchange rates had on those results. For additional information on the impact of translation of foreign currencies and our hedging practices, see Note 1 of Notes to Consolidated Financial Statements.

Our high levels of foreign manufacturing and sales also subject us to cash flow risks due to fluctuating currency exchange rates. We seek to mitigate those risks through the use of various derivative instruments – principally foreign currency forward exchange contracts.

During periods of adverse economic conditions, manufacturers and suppliers of capital goods, such as our company, are often the first to experience reductions in demand, as their customers defer or eliminate investments in capital equipment. Additionally, customers who might otherwise want to purchase capital goods found it difficult to obtain financing due to disruptions in the credit markets. During fiscal 2009, these conditions had the greatest impact on our European sales region, which is the primary market for our more expensive, higher-margin machines. As a result, we experienced overall declines of 59% in sales and 62% in orders during fiscal 2009 compared to fiscal 2008. The European sales region experienced declines of 63% in sales and 65% in orders in fiscal 2009 compared to fiscal 2008.

In response to these adverse market conditions, we implemented various initiatives to reduce expenses, including management and employee pay reductions, workforce reductions, suspension of the company’s contribution to the 401(k) plan and restrictions on travel expenditures, while staying committed to our strategic plan of product innovation and penetration of developing markets. Monthly unit production levels for the third and fourth quarters of fiscal 2009 were reduced by more than 80% from fiscal 2008 levels in an effort to decrease inventories.

We believe that, notwithstanding the impact of the recent global economic recession, our company remains fundamentally stable. We have a broad product line due to our ability to keep all product development schedules intact, no outstanding debt and a strong cash position.

Results of Operations

The following table presents, for the fiscal years indicated, selected items from the Consolidated Statements of Operations expressed as a percentage of our worldwide sales and service fees and the year-to-year percentage changes in the dollar amounts of those items.

	Percentage of Revenues									Year-to-Year % Change
	2009			2008			2007			Increase (Decrease)
										’09 vs. ’08			’08 vs. ’07
Sales and service fees		100.0	%		100.0	%		100.0	%		(59.4	)%		19.1	%
Gross profit		28.4	%		36.9	%		37.8	%		(68.7	)%		16.2	%
Selling, general and administrative expenses		33.9	%		20.9	%		21.3	%		(34.0	)%		16.7	%
Operating income (loss)		(5.5	)%		16.0	%		16.5	%		(114.1	)%		15.7	%
Other income (expense)		1.4	%		(0.7	)%		0.9	%		175.2	%		(194.1	)%
Net income (loss)		(2.6	)%		10.1	%		11.1	%		(110.3	)%		7.8	%

Fiscal 2009 Compared to Fiscal 2008

Sales and Service Fees. Annual sales and service fees for fiscal 2009 were $91.0 million, a decrease of $133.0 million, or 59.4%, from fiscal 2008 as a result of the global recession. Of this decrease, $7.9 million was attributable to the unfavorable effect of a strengthening U.S. Dollar on currency translation.

Since the beginning of fiscal 2009, net sales have been materially adversely affected by the global recession as our customers deferred or eliminated investments in capital equipment. Additionally, customers who might otherwise have been willing to purchase capital goods have found it difficult to obtain financing due the contraction of the credit markets.

Net Sales and Service Fees by Geographic Region

The following table sets forth net sales and service fees by geographic region for the years ended October 31, 2009 and 2008 (in thousands):

	October 31,								Increase (Decrease)
	2009				2008				Amount			%
North America	$	25,652	28.2	%	$	48,373	21.6	%	$	(22,721	)		(47.0	)%
Europe		60,132	66.1	%		163,807	73.1	%		(103,675	)		(63.3	)%
Asia Pacific		5,232	5.7	%		11,814	5.3	%		(6,582	)		(55.7	)%
Total	$	91,016	100.0	%	$	223,994	100.0	%	$	(132,978	)		(59.4	)%

During fiscal 2009, these conditions had the greatest impact on our European sales region, the primary market for our more expensive, higher-margin machines. The European sales region accounted for 66% of sales in fiscal 2009 and 73% in fiscal 2008. In fiscal 2009, unit shipments decreased by 58% in Europe and 55% in North America and Asia from fiscal 2008 levels.

Net Sales and Service Fees by Product Category

The following table sets forth net sales and service fees by product category for the years ended October 31, 2009 and 2008 (in thousands):

	October 31,								Increase
	2009				2008				Amount			%

Computerized Machine Tools	$	75,213	82.6	%	$	199,238	88.9	%	$	(124,025	)		(62.2	)%
Service Fees, Parts and Other		15,803	17.4	%		24,756	11.1	%		(8,953	)		(36.2	)%
Total	$	91,016	100.0	%	$	223,994	100.0	%	$	(132,978	)		(59.4	)%

Sales of computerized machine tools totaled $75.2 million in fiscal 2009, a decrease of $124.0 million, or 62.2%, as a result of the impact of the global recession on the machine tool market.

Orders and Backlog. New order bookings in fiscal 2009, were $80.6 million, a decrease of $131.9 million, or 62.1%, from the prior year. This decrease was primarily driven by a decline in European orders, which were down $100.8 million, or 65%. Fiscal 2009 orders in North America decreased $23.9 million, or 51%, and orders in the Asia Pacific sales region decreased $7.2 million, or 65%. Orders for fiscal 2009 compared to fiscal 2008 were unfavorably affected by approximately $6.9 million, or 5.2%, due to changes in currency exchange rates. Unit orders decreased 60.3% in Europe, 58.0% in North America and 60.6% in the Asia Pacific region. Backlog was $6.3 million at October 31, 2009, compared to $15.7 million at October 31, 2008. We do not believe backlog is a useful measure of past performance or indicative of future performance. Backlog orders as of October 31, 2009 are expected to be fulfilled in fiscal 2010.

Gross Margin. Gross margin for fiscal 2009 was 28.4%; a decrease from the 36.9% margin realized in the corresponding 2008 period, reflecting the impact of lower sales of higher-margin VMX machines in the European sales region, the impact of fixed costs on lower sales and production volume, and competitive pricing pressures on a global basis.

Operating Expenses. Selling, general and administrative expenses were $30.9 million for fiscal 2009, a decrease of $15.9 million, or 34%, from fiscal 2008. These reductions reflect lower sales commissions, the benefit of cost reduction initiatives, and the favorable effect of a stronger U.S. Dollar in 2009 when translating foreign operating expenses to U.S. Dollars for financial reporting purposes, partially offset by severance expense of $780,000.

Operating Income (Loss). We incurred an operating loss for fiscal 2009 of $5.0 million, or (5.5%) of sales, compared to operating income of $35.8 million, or 16.0% of sales, in fiscal 2008. The loss was primarily due to the significant decline in our sales, particularly those of our higher-margin VMX machines in the European sales region. Also contributing to the loss was the impact of fixed costs on lower sales and production volume, and competitive pricing pressures on a global basis.

Other Income (Expense). The $2.9 million increase in other income for fiscal 2009 in comparison to fiscal 2008 was primarily due to net realized gains of $2.0 million from cash flow hedges of forecasted inter-company sales and purchases that became ineffective as production levels steeply declined during the fiscal year.

Provision (Benefit) for Income Taxes. The effective tax rate for fiscal 2009 was a benefit of 39.1%, compared to a provision of 34.1% for fiscal 2008. The change in the effective tax rate was primarily due to tax credits and the reversal of tax reserves due to expiring statutes of limitations.

Net Income (Loss). Net loss for fiscal 2009 was $2.3 million, or ($0.36) per diluted share, which is a decrease of $24.8 million from fiscal 2008 net income of $22.5 million, or $3.49 per diluted share.

Fiscal 2008 Compared to Fiscal 2007

Sales and Service Fees. Annual sales and service fees in fiscal 2008 were the highest in our 40-year history, totaling $224.0 million, an increase of $35.9 million, or 19.1%, over fiscal 2007. Of this increase, $22.7 million was attributable to operational growth and approximately $13.2 million was due to the favorable effect of a weakening U.S. Dollar on currency translation. Computerized machine tool sales, which also were the highest in our history, totaled $199.2 million, an increase of 20.1% from the $165.8 million recorded in 2007, primarily driven by strong customer demand in European markets during the first nine months of the fiscal year, particularly for our higher end VMX product line.

Net Sales and Service Fees by Geographic Region

The following table sets forth net sales and service fees by geographic region for the years ended October 31, 2008 and 2007 (in thousands):

	October 31,								Increase (Decrease)
	2008				2007				Amount			%
North America	$	48,373	21.6	%	$	52,133	27.7	%	$	(3,760	)		(7.2	)%
Europe		163,807	73.1	%		125,446	66.7	%		38,361			30.6	%
Asia Pacific		11,814	5.3	%		10,468	5.6	%		1,346			12.9	%
Total	$	223,994	100.0	%	$	188,047	100.0	%	$	35,947			19.1	%

In North America, sales and service fees decreased 7.2% as unit volumes decreased by 14.9% primarily in the second half of the year as a result of the global economic slowdown. This decrease in volume was partially offset by improved product mix.

European sales and service fees increased by 30.6%, which includes a favorable impact due to changing currency rates of $12.4 million, or 9.9%. Unit sales increased by 11.5% in fiscal 2008 compared to fiscal 2007 as a result of a strong European market during the first three quarters of the fiscal year and continued expansion into eastern European markets. The remaining 9.2% of growth in European sales and service fees was primarily derived by continued demand for our higher end VMX product line.

Sales and service fees in the Asia Pacific region increased by 12.9%, due to penetration into new markets along with the favorable impact of changes due to currency exchange rates of $778,000, or 7.4%.

Net Sales and Service Fees by Product Category

The following table sets forth net sales and service fees by product category for the years ended October 31, 2008 and 2007 (in thousands):

	October 31,								Increase
	2008				2007				Amount		%

Computerized Machine Tools	$	199,238	88.9	%	$	165,832	88.2	%	$	33,406		20.1	%
Service Fees, Parts and Other		24,756	11.1	%		22,215	11.8	%		2,541		11.4	%
Total	$	223,994	100.0	%	$	188,047	100.0	%	$	35,947		19.1	%

Sales of computerized machine tools totaled $199.2 million in fiscal 2008, an increase of $33.4 million, or 20.1%, primarily driven by a strong European market and continued demand for our higher end VMX product line.

Orders and Backlog. New order bookings in fiscal 2008, were $212.5 million, an increase of $13.6 million, or 6.8%, over the prior year. Orders for fiscal 2008 compared to fiscal 2007 were favorably affected by approximately $11.7 million, or 5.9%, due to changes in currency exchange rates. Unit orders increased 1.1% in Europe and decreased by 18.0% and 11.5% in North America and Asia Pacific, respectively. These order rates were significantly impacted by an overall fourth quarter decline in unit orders of 32.4%. Orders declined in all regions as our customers reacted to the sudden downturn in the markets they serve and limitations on their own ability to access the credit markets. Backlog was $15.7 million at October 31, 2008, compared to $29.4 million at October 31, 2007. We do not believe backlog is a useful measure of past performance or indicative of future performance. Backlog orders as of October 31, 2008 were fulfilled in fiscal 2009.

Gross Margin. Gross margin for fiscal 2008 was 36.9%, a decrease from the 37.8% margin realized in the corresponding 2007 period, reflecting the impact of higher material costs.

Operating Expenses. Selling, general and administrative expenses for fiscal 2008 increased $6.7 million, or 16.7%, from those of fiscal 2007 and includes the unfavorable effect of currency translation of $2.2 million, or 5.6%. The remaining increase of $4.5 million was attributable to increased global sales and marketing expenditures, which include increased expenses for trade shows, European agent sales commissions and marketing expenses for expansion of sales into emerging markets.

Operating Income. Operating income for fiscal 2008 totaled $35.8 million, or 16.0% of sales, compared to $31.0 million, or 16.5%, of sales, in fiscal 2007. The increase in operating income year-over-year primarily reflected growth in foreign sales and an improved product mix partially offset by higher material costs and operating expenses to support sales growth initiatives.

Other Income (Expense). The decrease in other income of $3.4 million for fiscal 2008 compared to fiscal 2007 was primarily due to $2.3 million of currency exchange losses on inter-company receivables and payables denominated in foreign currencies, net of gains or losses on forward exchange contracts. Included in this decrease was approximately $220,000 of net losses related to cash flow hedges of forecasted inter-company sales and purchases that were de-designated as production levels steeply declined in the fourth quarter of fiscal 2008. Additionally, fiscal 2007 included income from our equity investment in a Taiwan contract manufacturer, which was sold during the fourth quarter of that year.

Provision for Income Taxes. The effective tax rate for fiscal 2008 was 34.1%, compared to 36.2% for fiscal 2007. The reduction in the effective tax rate was primarily due to the utilization of tax credits and tax rates of international jurisdictions that were less than U.S. statutory rates.

Net Income. Net income for fiscal 2008 was $22.5 million, or $3.49 per diluted share, which is an increase of 7.8% over fiscal 2007 net income of $20.9 million, or $3.24 per diluted share.

Liquidity and Capital Resources

At October 31, 2009, we had cash and cash equivalents of $28.8 million compared to $26.4 million at October 31, 2008. Approximately 56.3% of the $28.8 million of cash and cash equivalents is denominated in U.S. Dollars. The remaining balances are denominated in the local currencies of our various foreign entities and are subject to fluctuations in currency exchange rates.

Working capital, excluding cash, was $68.7 million at October 31, 2009, compared to $73.8 million at October 31, 2008. The reduction in working capital was primarily due to reduced sales and production as a result of the lower market demand.

Capital expenditures were $3.7 million in fiscal 2009, $5.5 million in fiscal 2008, and $4.5 million in fiscal 2007. Capital expenditures were primarily for software development projects and an integrated computer system. We funded these expenditures with cash flow from operations.

At October 31, 2009, we had no debt or borrowings outstanding under any of our bank credit facilities.

We have an effective "shelf" registration statement on file with the SEC that allows us to offer and sell a variety of securities, including common stock, preferred stock, warrants, depositary shares and debt securities, up to an aggregate amount of $200.0 million, if and when authorized by the Board of Directors. At present, we have no plans to offer or sell securities.

Although we have not made any significant acquisitions in the recent past and we have no present plans for acquisitions, we continue to receive and review information on businesses and assets, including intellectual property assets, which are available for purchase.

Contractual Obligations and Commitments

The following is a table of contractual obligations and commitments as of October 31, 2009 (all amounts in thousands):

Payments Due by Period

	Total		Less than 1 Year		1-3 Years		3-5 Years		More than 5 Years
Operating Leases	$	4,780	$	1,915	$	2,002	$	863	$	—
Deferred Credits and Other		990		—		—		—		990
Total	$	5,770	$	1,915	$	2,002	$	863	$	990

In addition to the contractual obligations and commitments disclosed above, we also have a variety of other obligations for the procurement of materials and services, none of which subject us to any material non-cancelable commitments. While some of these obligations arise under long-term supply agreements, we are not committed under these agreements to accept or pay for requirements that are not needed to meet our production needs. We have no material minimum purchase commitments or “take-or-pay” type agreements or arrangements. Unrecognized tax benefits in the amount of approximately $671,000 have been excluded from the table above because we are unable to determine a reasonably reliable estimate of the timing of future payment.

We expect capital spending in fiscal 2010 to be approximately $2.4 million, which includes investments for capitalized software, capital equipment and costs to continue implementation of our integrated computer system. We will fund these commitments with cash on hand and cash generated from operations.

Off Balance Sheet Arrangements

From time to time, our subsidiaries guarantee third party payment obligations in connection with the sale of machines to customers that use financing. At October 31, 2009, 53 such guarantees were outstanding totaling approximately $2.4 million in guaranteed financing. Upon shipment, the customer has the risk of ownership. The customer does not obtain title until they have paid for the machine. We believe that the proceeds obtained from the sale of a repossessed machine would cover any payments required by the guarantee.

Critical Accounting Policies and Estimates

Our discussion and analysis of financial condition and results of operations is based upon our consolidated financial statements, which have been prepared in accordance with U.S. Generally Accepted Accounting Principles. The preparation of financial statements in conformity with those accounting principles require us to make judgments and estimates that affect the amounts reported in the consolidated financial statements and accompanying notes. Those judgments and estimates have a significant effect on the financial statements because they result primarily from the need to make estimates about the effects of matters that are inherently uncertain. Actual results could differ from those estimates. Our accounting policies, including those described below, are frequently evaluated as our judgment and estimates are based upon historical experience and on various other assumptions that are believed to be reasonable under the circumstances.

Revenue Recognition - We recognize revenue from sales of our machine tool systems upon delivery of the product to the customer, which is normally at the time of shipment, because persuasive evidence of an arrangement exists, delivery has occurred, the selling price is fixed and determinable and collectability is reasonably assured. In certain foreign locations, we retain title after shipment under a “retention of title” clause solely to protect collectability. The retention of title is similar to Uniform Commercial Code (“UCC”) filings in the United States and provides the creditor with additional rights to the machine if the customer fails to pay. Revenue recognition at the time of shipment is appropriate in this instance as long as all risks of ownership have passed to the buyer. Our computerized machine tools are general-purpose computer controlled machine tools that are typically used in stand-alone operations. Transfer of ownership and risk of loss are not contingent upon contractual customer acceptance. Prior to shipment, we test each machine to ensure the machine’s compliance with standard operating specifications as listed in our sales literature.

Depending upon geographic location, after shipment a machine may be installed at the customer’s facilities by a distributor, independent contractor or by one of our service technicians. In most instances where a machine is sold through a distributor, we have no installation involvement. If sales are direct or through sales agents, we will typically complete the machine installation, which consists of the reassembly of certain parts that were removed for shipping and the re-testing of the machine to ensure that it is performing within the standard specifications. We consider the machine installation process to be inconsequential and perfunctory.

Service fees from maintenance contracts are deferred and recognized in earnings on a pro rata basis over the term of the contract. Sales related to software products are recognized when shipped in conformity with American Institute of Certified Public Accountants’ Statement of Position 97-2. The software does not require production, modification or customization and at the time of shipment persuasive evidence of an arrangement exists, delivery has occurred, the selling price is fixed and determinable and collectability is reasonably assured.

Inventories – We determine at each balance sheet date how much, if any, of our inventory may ultimately prove to be unsalable or unsalable at its carrying cost. Reserves are established to effectively adjust the carrying value of such inventory to net realizable value. To determine the appropriate level of valuation reserves, we evaluate current stock levels in relation to historical and expected patterns of demand for all of our products. We evaluate the need for changes to valuation reserves based on market conditions, competitive offerings and other factors on a regular basis.

Income taxes - We record income taxes under FASB guidance related to accounting for income taxes. This guidance utilizes the liability method for computing deferred income taxes. Under this method, the amount of taxes currently payable or refundable are accrued and deferred tax assets and liabilities are recognized for the estimated future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax basis. Deferred tax assets are also recognized for realizable loss and tax credit carryforwards. Deferred tax assets and liabilities are measured using enacted income tax rates in each jurisdiction in effect for the year in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in income tax rates is recognized in our Consolidated Statements of Operations in the period that includes the enactment date.

The determination of our provision for income taxes requires judgment, the use of estimates and the interpretation and application of complex tax laws. Our provision for income taxes reflects a combination of income earned and taxed at the federal and state level in the U.S., as well as in various foreign jurisdictions. We have not provided for any U.S. income taxes on the undistributed earnings of our foreign subsidiaries or equity method investments based upon our determination that such earnings will be indefinitely reinvested abroad. On November 1, 2008, we adopted FASB guidance related to accounting for uncertainty in income taxes and we currently account for uncertain tax positions in accordance with the provisions of this guidance. Refer to Note 7, Income Taxes, for information related to the effect of adoption of this guidance, and the accounting for our uncertain tax positions.

As part of our financial reporting process, we must assess the likelihood that our deferred tax assets can be recovered. If recovery is not likely, the provision for taxes must be increased by recording a reserve in the form of a valuation allowance for the deferred tax assets that are estimated not to be ultimately recoverable. In the process, certain relevant criteria are evaluated including the existence of deferred tax liabilities that can be used to absorb deferred tax assets, the taxable income in prior carry-back years that can be used to absorb net operating losses and credit carry-backs, tax planning strategies, and taxable income in future years. Our judgment regarding future profitability may change due to future market conditions, changes in U.S. or foreign tax laws and other factors. These changes, if any, may require material adjustments to these deferred tax assets and an accompanying reduction or increase in net income in the period when such determinations are made.

In addition to the risks to the effective tax rate described above, the future effective tax rate reflected in forward-looking statements is based on currently effective tax laws. Significant changes in those laws could materially affect these estimates.

Capitalized Software Development Costs – Costs incurred to develop new computer software products and significant enhancements to software features of existing products are capitalized as required by FASB guidance relating to accounting for the costs of computer software to be sold, leased, or otherwise marketed, and amortized over the estimated product life of the related software. The determination as to when in the product development cycle technological feasibility has been established, and the expected product life, require judgments and estimates by management and can be affected by technological developments, innovations by competitors and changes in market conditions affecting demand. We periodically review the carrying values of these assets and make judgments as to ultimate realization considering the above-mentioned risk factors.

Derivative Financial Instruments – Critical aspects of our accounting policy for derivative financial instruments include conditions that require that critical terms of a hedging instrument are essentially the same as a hedged forecasted transaction. Another important element of our policy demands that formal documentation be maintained as required by FASB guidance relating to accounting for derivative instruments and hedging activities. Failure to comply with these conditions would result in a requirement to recognize changes in market value of hedge instruments in earnings. We routinely monitor significant estimates, assumptions, and judgments associated with derivative instruments, and compliance with formal documentation requirements.

Stock Compensation – We account for share-based compensation according to FASB guidance relating to share based payments, which requires the measurement and recognition of compensation expense for all share-based awards made to employees and directors based on estimated fair values on the grant date. This guidance requires that we estimate the fair value of share-based awards on the date of grant and recognize as expense the value of the portion of the award that is ultimately expected to vest over the requisite service period.

Item 7a. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISKS

Interest Rate Risk

We had no borrowings outstanding under our bank credit facilities at October 31, 2009 and have not borrowed from our bank credit facilities since February 2005. Note 5 of Notes to Consolidated Financial Statements sets forth the terms of our current credit facilities.

Foreign Currency Exchange Risk

In fiscal 2009, we derived more than 70% of our revenues from foreign markets. All of our computerized machine tools and computer control systems, as well as certain proprietary service parts, are sourced by our U.S.-based engineering and manufacturing division and re-invoiced to our foreign sales and service subsidiaries, primarily in their functional currencies.

Our products are sourced from foreign suppliers or built to our specifications by either our wholly owned subsidiary in Taiwan or an affiliated contract manufacturer. Our purchases are predominantly in foreign currencies and in some cases our arrangements with these suppliers include foreign currency risk sharing agreements, which reduce (but do not eliminate) the effects of currency fluctuations on product costs. The predominant portion of the exchange rate risk associated with our product purchases relates to the New Taiwan Dollar.

We enter into foreign currency forward exchange contracts from time to time to hedge the cash flow risk related to forecasted inter-company sales and purchases denominated in, or based on, foreign currencies (primarily the Euro, Pound Sterling, and New Taiwan Dollar). We also enter into foreign currency forward exchange contracts to protect against the effects of foreign currency fluctuations on receivables and payables denominated in foreign currencies. We do not speculate in the financial markets and, therefore, do not enter into these contracts for trading purposes.

Forward contracts for the sale or purchase of foreign currencies as of October 31, 2009, which are designated as cash flow hedges under Financial Accounting Standards Board’s (FASB) guidance related to accounting for derivative instruments and hedging activities were as follows:

	Notional Amount		Weighted Avg.			Contract Amount at Forward Rates in U.S. Dollars
Forward Contracts	in Foreign Currency		Forward Rate			Contract Date		October 31, 2009		Maturity Dates
Sale Contracts:
Euro		6,900,000		1.3876		$	9,574,440	$	10,149,857	Nov 2009-Oct 2010
Sterling		2,015,000		1.5819		$	3,187,529	$	3,309,601	Nov 2009-Oct 2010
Purchase Contracts:
New Taiwan Dollar		275,000,000		32.29	*	$	8,517,360	$	8,578,063	Nov 2009-Oct 2010

*NT Dollars per U.S. Dollar

Forward contracts for the sale or purchase of foreign currencies as of October 31, 2009, which were entered into to protect against the effects of foreign currency fluctuations on receivables and payables and are not designated as hedges under this guidance denominated in foreign currencies, were as follows:

						Contract Amount at Forward Rates in U.S. Dollars
Forward Contracts	Notional Amount in Foreign Currency		Weighted Avg. Forward Rate			Contract Date		October 31, 2009		Maturity Dates
Sale Contracts:
Euro		14,881,291		1.4494		$	21,568,943	$	21,909,736	Nov 2009 – Feb 2010
Pound Sterling		108,276		1.6468		$	178,309	$	177,987	Nov 2009
Canadian Dollar		278,873		0.9222		$	257,177	$	258,138	Dec 2009
Singapore Dollar		5,090,247		1.5501		$	3,283,718	$	3,630,782	Mar 2010
Purchase Contracts:
New Taiwan Dollar		11,780,000		32.34	*	$	364,255	$	361,350	Nov 2009

* NT Dollars per U.S. Dollar

We are exposed to foreign currency exchange risk related to our investment in net assets in foreign countries. To manage this risk, we entered into a forward contract on November 26, 2007 with a notional amount of €3.0 million. We designated this forward contract as a hedge of our net investment in Euro denominated assets. We selected the forward method under the FASB guidance related to the accounting for derivatives instruments and hedging activities. The forward method requires all changes in the fair value of the forward to be reported as a cumulative translation adjustment in Accumulated Other Comprehensive Loss, net of tax, in the same manner as the underlying hedged net assets. This forward contract matured on November 25, 2008 and we entered into a new forward contract for the same notional amount. As of October 31, 2009, we had a realized gain of $355,000 and an unrealized loss of $332,000, net of tax, recorded as cumulative translation adjustments in Accumulated Other Comprehensive Loss, related to these forward contracts.

Forward contracts for the sale or purchase of foreign currencies as of October 31, 2009, which are designated as net investment hedges under this guidance were as follows:

Notional

Amount

Weighted

Avg.

Contract Amount at Forward

Rates in

U.S. Dollars

Forward Contracts

in Foreign

Currency

Forward

Rate

Contract

Date

October 31,

2009

Maturity Date

Sale Contracts:

Euro

3,000,000

1.2936

3,880,800

4,417,110

Nov 2009

Management’s Annual Report on Internal Control Over Financial Reporting

To the Shareholders and

Board of Directors

of Hurco Companies, Inc.:

Management of Hurco Companies, Inc. (the “Company”), has assessed the effectiveness of internal controls over financial reporting as of October 31, 2009, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Management is responsible for these financial statements, for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting.

Because of its inherent limitations, the Company’s internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In management’s opinion, the Company’s internal controls over financial reporting as of October 31, 2009, are effective based on the criteria specified above.

Our independent registered accounting firm, Ernst & Young LLP, who also audited our consolidated financial statements, audited the effectiveness of our internal control over financial reporting. Ernst & Young has issued their attestation report, which is included in Part II, Item 8 of this Annual Report on Form 10-K.

/s/ Michael Doar

Michael Doar,

Chairman of the Board, Chief Executive Officer and President

/s/ John G. Oblazney

John G. Oblazney,

Vice President & Chief Financial Officer

/s/ Sonja K. McClelland

Sonja K. McClelland

Corporate Controller, Assistant Secretary

(Principal Accounting Officer)

Indianapolis, Indiana

January 12, 2010

Item 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

Report of Independent Registered Public Accounting Firm

To the Shareholders and

Board of Directors

of Hurco Companies, Inc.

We have audited the accompanying consolidated balance sheet of Hurco Companies, Inc. as of October 31, 2009 and the related consolidated statement of operations, changes in shareholders’ equity and cash flows for the year ended October 31, 2009. Our audit also includes the financial statement schedule listed at Item 15(a). These financial statements and schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and schedule based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audit provides a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Hurco Companies, Inc. as of October 31, 2009, and the consolidated results of their operations and their cash flows for the year ended October 31, 2009, in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related financial statement schedule, when considered in relation to the basic financial statements taken as a whole, presents fairly in all material respects the information set forth therein.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Hurco Companies, Inc.’s internal control over financial reporting as of October 31, 2009, based on the criteria established in Internal Control – Integrated Framework issued by the Commission of Sponsoring Organizations of the Treadway Commission and our report dated January 12, 2010 expressed an unqualified opinion therein.

/s/Ernst & Young LLP

Indianapolis, Indiana

January 12, 2010

Report of Independent Registered Public Accounting Firm

To the Shareholders and

Board of Directors

of Hurco Companies, Inc.

We have audited Hurco Companies, Inc.’s internal control over financial reporting as of October 31, 2009, based on criteria established in Internal Cotnrol-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). Hurco Companies, Inc.’s management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Annual Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external reporting purposes in accordance with the generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, Hurco Companies, Inc. maintained, in all material respects effective internal control over financial reporting as of October 31, 2009, based on the COSO criteria.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheet as of October 31, 2009 and the related consolidated statement of operations, changes in shareholders’ equity and cash flows for the year ended October 31, 2009 of Hurco Companies, Inc. and our report dated January 12, 2010 expressed an unqualified opinion thereon.

/s/Ernst & Young LLP

Indianapolis, Indiana

January 12, 2010

Report of Independent Registered Public Accounting Firm

To the Shareholders and

Board of Directors

of Hurco Companies, Inc.

We have audited the consolidated accompanying balance sheet of Hurco Companies, Inc. as of October 31, 2008, and the related consolidated statements of operations, changes in shareholders' equity, and cash flows for each of the two years in the period ended October 31, 2008. In connection with our audits of the consolidated financial statements, we have also audited the consolidated financial statement schedule listed in the index under Item 15 as it relates to the information for the years ended October 31, 2008 and October 31, 2007. Hurco Companies, Inc. management is responsible for these financial statements and the financial statement schedule. Our responsibility is to express an opinion on these financial statements and financial statement schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of the Company as of October 31, 2008 and the results of its operations and its cash flows for each of the two years in the period ended October 31, 2008, in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related consolidated financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

/s/Crowe Horwath LLP

Indianapolis, Indiana

January 12, 2009

HURCO COMPANIES, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

	Year Ended October 31
	2009			2008			2007
	(Dollars in thousands, except per share amounts)

Sales and service fees	$	91,016		$	223,994		$	188,047
Cost of sales and service		65,188			141,377			116,965
Gross profit		25,828			82,617			71,082
Selling, general and administrative expenses		30,874			46,811			40,124
Operating income (loss)		(5,046	)		35,806			30,958
Interest expense		35			63			201
Interest income		190			542			699
Investment income		16			465			339
Earnings (losses) from equity investments		(326	)		12			1,048
Other income (expense), net		1,389			(2,596	)		(78	)
Income (loss) before income taxes		(3,812	)		34,166			32,765
Provision (benefit) for income taxes		(1,491	)		11,646			11,876
Net income (loss)	$	(2,321	)	$	22,520		$	20,889

Earnings (loss) per common share – basic	$	(0.36	)	$	3.51		$	3.27
Weighted average common shares outstanding – basic		6,429			6,415			6,382
Earnings (loss) per common share – diluted	$	(0.36	)	$	3.49		$	3.24
Weighted average common shares outstanding – diluted		6,429			6,444			6,440

The accompanying notes are an integral part of the consolidated financial statements.

HURCO COMPANIES, INC.

CONSOLIDATED BALANCE SHEETS

		As of October 31
		2009			2008
	(Dollars in thousands, except per share amounts)
ASSETS
Current assets:
Cash and cash equivalents		$	28,782		$	26,394
Short-term investments			—			6,674
Accounts receivable, less allowance for doubtful accounts of $809 in 2009 and $678 in 2008			13,988			31,952
Refundable taxes			7,121			—
Inventories, net			60,281			66,368
Deferred income taxes and other			5,890			5,444
Derivative assets			376			12,463
Other			1,826			2,017
Total current assets			118,264			151,312

Property and equipment:
Land			782			782
Building			7,116			7,127
Machinery and equipment			14,995			14,885
Leasehold improvements			2,021			1,765
			24,914			24,559
Less accumulated depreciation and amortization			(11,802	)		(10,961	)
			13,112			13,598
Software development costs, less accumulated amortization			6,503			5,711
Investments and other assets, net			6,864			6,823
		$	144,743		$	177,444

LIABILITIES AND SHAREHOLDERS’ EQUITY
Current liabilities:
Accounts payable		$	7,920		$	26,691
Accounts payable-related parties			342			1,612
Accrued expenses and other			9,025			17,598
Accrued warranty expenses			1,286			2,536
Derivative liabilities			2,234			2,692
Total current liabilities			20,807			51,129

Non-current liabilities:
Deferred income taxes			2,570			2,056
Deferred credits and other			990			782
			3,560			2,838
Commitments and contingencies
Shareholders’ equity:
Preferred stock: no par value per share, 1,000,000 shares authorized, no shares issued			—			—
Common stock: no par value, $.10 stated value per share, 13,250,000 shares authorized, 6,440,851 and 6,420,851 shares issued and outstanding in 2009 and 2008, respectively			644			642
Additional paid-in capital			52,003			51,690
Retained earnings			69,568			71,889
Accumulated other comprehensive loss			(1,839	)		(744	)
Total shareholders’ equity			120,376			123,477
		$	144,743		$	177,444

The accompanying notes are an integral part of the consolidated financial statements.

HURCO COMPANIES, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

	Year Ended October 31
	2009			2008			2007
	(Dollars in thousands)
Cash flows from operating activities:
Net income (loss)	$	(2,321	)	$	22,520		$	20,889
Adjustments to reconcile net income (loss) to Net cash provided by (used for) operating activities:
Provision for doubtful accounts		131			(73	)		116
Deferred income tax provision		(2,824	)		1,048			1,216
Equity in (income) loss of affiliates		326			(12	)		(1,048	)
Foreign currency (gain) loss		(6,422	)		8,184			(7,602	)
Unrealized (gain) loss on derivatives		4,058			(3,886	)		429
Depreciation and amortization		3,295			3,023			2,106
Stock-based compensation		246			535			480
Change in assets and liabilities:
(Increase) decrease in accounts receivable		14,262			(6,260	)		(1,742	)
(Increase) decrease in inventories		11,409			(11,832	)		(14,116	)
Increase (decrease) in accounts payable		(20,524	)		(7,649	)		7,821
Increase (decrease) in accrued expenses		(9,610	)		3,304			6,474
Net change in derivative assets and liabilities		3,261			(2,158	)		491
Other		3,230			(6,583	)		(1,321	)
Net cash provided by (used for) operating activities		(1,483	)		161			14,193

Cash flows from investing activities:
Proceeds from sale of property and equipment		239			17			—
Purchase of property and equipment		(1,679	)		(4,580	)		(3,325	)
Purchase of investments		—			(9,100	)		(24,000	)
Sale of investments		6,674			12,100			14,000
Software development costs		(2,020	)		(934	)		(1,185	)
Other proceeds (investments)		(889	)		(80	)		1,898
Net cash provided by (used for) investing activities		2,325			(2,577	)		(12,612	)

Cash flows from financing activities:
Repayment of first mortgage		—			—			(4,010	)
Tax benefit from exercise of stock options		26			36			298
Proceeds from exercise of common stock options		43			151			186
Net cash provided by (used for) financing activities		69			187			(3,526	)

Effect of exchange rate changes on cash		1,477			(1,137	)		1,859
Net increase (decrease) in cash		2,388			(3,366	)		(86	)

Cash and cash equivalents at beginning of year		26,394			29,760			29,846

Cash and cash equivalents at end of year	$	28,782		$	26,394		$	29,760

Supplemental disclosures:
Cash paid for:
Interest	$	20		$	12		$	157
Income taxes	$	4,877		$	15,799		$	9,971

The accompanying notes are an integral part of the consolidated financial statements.

HURCO COMPANIES, INC.

CONSOLIDATED STATEMENTS OF CHANGES IN SHAREHOLDERS' EQUITY

	Common Stock
(Dollars in thousands, except Shares Issued and Outstanding)	Shares Issued & Outstanding		Amount		Additional Paid-In Capital		Retained Earnings			Accumulated Other Comprehensive Income (Loss)			Total

Balances, October 31, 2006		6,346,520	$	635	$	50,011	$	28,480		$	(3,751	)	$	75,375

Net income		—		—		—		20,889			—			20,889

Translation of foreign currency financial statements		—		—		—		—			2,568			2,568

Unrealized loss of derivative instruments, net of tax		—		—		—		—			(2,193	)		(2,193	)
Comprehensive income														21,264

Exercise of common stock options		45,700		4		182		—			—			186

Tax benefit from exercise of stock options		—		—		298		—			—			298

Stock-based compensation expense		—		—		480		—			—			480
Balances, October 31, 2007		6,392,220		639		50,971		49,369			(3,376	)		97,603

Net income		—		—		—		22,520			—			22,520

Translation of foreign currency financial statements		—		—		—		—			(3,747	)		(3,747	)

Unrealized gain of derivative instruments, net of tax		—		—		—		—			6,581			6,581

Unrealized loss on investments, net of tax		—		—		—		—			(202	)		(202	)
Comprehensive income														25,152

Exercise of common stock options		28,631		3		148		—			—			151

Tax benefit from exercise of stock options		—		—		36		—			—			36

Stock-based compensation expense		—		—		535		—			—			535
Balances, October 31, 2008		6,420,851		642	$	51,690		71,889			(744	)		123,477

Net loss		—		—		—		(2,321	)		—			(2,321	)

Translation of foreign currency financial statements		—		—		—		—			3,080			3,080

Unrealized loss of derivative instruments, net of tax		—		—		—		—			(4,377	)		(4,377	)

Reversal of unrealized loss on investments, net of tax		—		—		—		—			202			202
Comprehensive loss														(3,416	)

Exercise of common stock options		20,000		2		41		—			—			43

Tax benefit from exercise of stock options		—		—		26		—			—			26

Stock-based compensation expense		—		—		246		—			—			246
Balances, October 31, 2009		6,440,851	$	644	$	52,003	$	69,568		$	(1,839	)	$	120,376

The accompanying notes are an integral part of the consolidated financial statements.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

1. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

FASB Accounting Standards Codification – Effective for interim and annual periods ending after September 15, 2009, the FASB has defined a new hierarchy for U.S. GAAP and established the FASB Accounting Standards Codification (ASC) as the sole source for authoritative guidance to be applied by nongovernmental entities. The adoption of the ASC changes the manner in which U.S. GAAP guidance is referenced, but it does not have any impact on our financial position or results of operations.

Consolidation. The consolidated financial statements include the accounts of Hurco Companies, Inc. (an Indiana corporation) and its wholly owned and controlled subsidiaries. We have a 35% ownership interest in a Taiwan affiliate that is accounted for using the equity method. Our investment in that affiliate was approximately $2.3 million and $2.6 million as of October 31, 2009 and 2008 respectively. That investment is included in Investments and Other Assets on the accompanying Consolidated Balance Sheets. Intercompany accounts and transactions have been eliminated.

Statements of Cash Flows. We consider all highly liquid investments with a stated maturity of three months or less to be cash equivalents. Cash flows from purchases and sales of auction rate securities are classified as investing activities. Cash flows from hedges are classified consistent with the items being hedged.

Translation of Foreign Currencies. All balance sheet accounts of non-U.S. subsidiaries are translated at the exchange rate as of the end of the year and translation adjustments of foreign currency balance sheets are recorded as a component of Accumulated Other Comprehensive Loss in shareholders' equity. Income and expenses are translated at the average exchange rates during the year. Cumulative foreign currency translation adjustments as of October 31, 2009 were a net loss of $1,399,000 and are included in Accumulated Other Comprehensive Loss. Foreign currency transaction gains and losses are recorded as income or expense as incurred.

Hedging. On February 1, 2009, we adopted FASB guidance related to disclosures about derivative instruments and hedging activities. The adoption of this guidance did not have a material impact on our consolidated financial position or results of operations, but does require increased disclosure of our derivative and hedging activities, including how derivative and hedging activities affect our consolidated financial statements. These disclosures are provided below.

We are exposed to certain market risks relating to our ongoing business operations, including foreign currency risk, interest rate risk and credit risk. We manage our exposure to these and other market risks through regular operating and financing activities. Currently, the only risk that we manage through the use of derivative instruments is foreign currency risk.

We operate on a global basis and are exposed to the risk that our financial condition, results of operations and cash flows could be adversely affected by changes in foreign currency exchange rates. To reduce the potential effects of foreign exchange rate movements on our net equity investment in one of our foreign subsidiaries, gross profit and net earnings, we enter into derivative financial instruments in the form of foreign exchange forward contracts with a major financial institution. We are primarily exposed to foreign currency exchange rate risk with respect to transactions and net assets denominated in Euros, Pounds Sterling, Canadian Dollars, Singapore Dollars and New Taiwan Dollars.

We account for derivative instruments designated as hedging instruments in accordance with FASB guidance related to accounting for derivative instruments and report all derivative instruments as assets or liabilities at fair value on our consolidated balance sheet.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

Derivatives Designated as Hedging Instruments

We enter into foreign currency forward exchange contracts periodically to hedge certain forecasted inter-company sales and purchases denominated in foreign currencies (the Pound Sterling, Euro and New Taiwan Dollar). The purpose of these instruments is to mitigate the risk that the U.S. Dollar net cash inflows and outflows resulting from sales and purchases denominated in foreign currencies will be adversely affected by changes in exchange rates. These forward contracts have been designated as cash flow hedge instruments, and are recorded in the Consolidated Balance Sheets at fair value in Derivative Assets and Derivative Liabilities. The effective portion of the gains and losses resulting from the changes in the fair value of these hedge contracts are deferred in Accumulated Other Comprehensive Loss and recognized as an adjustment to Cost of Sales and Service in the period that the corresponding inventory sold that is the subject of the related hedge contract is recognized, thereby providing an offsetting economic impact against the corresponding change in the U.S. Dollar value of the inter-company sale or purchase being hedged. The ineffective portion of gains and losses resulting from the changes in the fair value of these hedge contracts is reported in Other Income (Expense) immediately. We perform quarterly assessments of hedge effectiveness by verifying and documenting the critical terms of the hedge instrument and determining that forecasted transactions have not changed significantly. We also assess on a quarterly basis whether there have been adverse developments regarding the risk of a counterparty default.

We have forward contracts outstanding as of October 31, 2009, in Euros and Pounds Sterling and New Taiwan Dollars with set maturity dates ranging from November 2009 through October 2010. The contract amount at forward rates in U.S. Dollars at October 31, 2009 for Euros and Pounds Sterling was $10.1 million and $3.3 million, respectively. The contract amount at forward rates in U.S. Dollars for New Taiwan Dollars was $8.6 million at October 31, 2009. At October 31, 2009, we had approximately $457,000 of losses, net of tax, related to cash flow hedges deferred in Accumulated Other Comprehensive Loss. Of this amount, $402,000 represents unrealized losses, net of tax, related to cash flow hedge instruments that remain subject to currency fluctuation risk. These deferred losses will be recorded as an adjustment to Cost of Sales in periods through October 2010, in which the corresponding inventory that is the subject of the related hedge contract is sold, as described above.

We are also exposed to foreign currency exchange risk related to our investment in net assets in foreign countries. To manage this risk, we entered into a forward contract on November 26, 2007 with a notional amount of €3.0 million. We designated this forward contract as a hedge of our net investment in Euro denominated assets. We selected the forward method under the FASB guidance related to the accounting for derivatives instruments and hedging activities. The forward method requires all changes in the fair value of the forward to be reported as a cumulative translation adjustment in Accumulated Other Comprehensive Loss, net of tax, in the same manner as the underlying hedged net assets. This forward contract matured on November 25, 2008 and we entered into a new forward contract for the same notional amount that is set to mature in November 2009. At October 31, 2009, we had $355,000 of realized losses and $332,000 of unrealized losses, net of tax, recorded as cumulative translation adjustments in Accumulated Other Comprehensive Loss related to these forward contracts.

Derivatives Not Designated as Hedging Instruments

We enter into foreign currency forward exchange contracts to protect against the effects of foreign currency fluctuations on receivables and payables denominated in foreign currencies. These derivative instruments are not designated as hedges under FASB guidance and, as a result, changes in their fair value are reported currently as Other Expense (Income), Net in the Consolidated Statements of Operations consistent with the transaction gain or loss on the related receivables and payables denominated in foreign currencies.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

We have forward contracts outstanding as of October 31, 2009, in Euros, Pounds Sterling, Canadian Dollars, Singapore Dollars and New Taiwan Dollars with set maturity dates ranging from November 2009 through March 2010. The contract amounts at forward rates in U.S. Dollars at October 31, 2009 for Euros, Pounds Sterling, Canadian Dollars and Singapore Dollars totaled $26.0 million. The contract amount at forward rates in U.S. Dollars for New Taiwan Dollars was $361,000 at October 31, 2009.

Fair Value of Derivative Instruments

We recognize the fair value of derivative instruments as assets and liabilities on a gross basis on our Consolidated Balance Sheets. As of October 31, 2009 and October 31, 2008, all derivative instruments were recorded at fair value on the balance sheets as follows (in thousands):

	2009			2008
	Balance Sheet	Fair		Balance Sheet	Fair
Derivatives	Location	Value		Location	Value
Designated as Hedging Instruments:
Foreign exchange forward contracts	Derivative assets	$	74	Derivative assets	$	9,733
Foreign exchange forward contracts	Derivative liabilities	$	1,246	Derivative liabilities	$	2,568

Not Designated as Hedging Instruments:
Foreign exchange forward contracts	Derivative assets	$	302	Derivative assets	$	2,730
Foreign exchange forward contracts	Derivative liabilities	$	988	Derivative liabilities	$	124

Effect of Derivative Instruments on the Consolidated Balance Sheets, Statements of Changes in Shareholders’ Equity and Statements of Operations

Derivative instruments had the following effects on our Consolidated Balance Sheets, Statements of Changes in Shareholders’ Equity and Statements of Operations, net of tax during the year ended October 31, 2009 and 2008 (in thousands):

Derivatives	Amount of Gain (Loss) Recognized in Other Comprehensive Income					Location of Gain (Loss) Reclassified from Other Comprehensive Income	Amount of Gain (Loss) Reclassified from Other Comprehensive Income
	2009			2008			2009		2008
Designated as Hedging Instruments:
(Effective Portion)
Foreign exchange forward contracts	$	(435	)	$	3,938	Cost of sales and service	$	989	$	(4,682	)

(Ineffective Portion)
Foreign exchange forward contracts		N/A			N/A	Other income (expense)	$	2,028	$	(220	)

	Location of Gain (Loss)	Amount of Gain (Loss)
Derivatives	Recognized in Operations	Recognized in Operations
		2009			2008
Not Designated as Hedging Instruments:

Foreign exchange forward contracts	Other income (expense)	$	(643	)	$	2,979

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

Inventories. Inventories are stated at the lower of cost or market, with cost determined using the first-in, first-out method. Provisions are made to reduce excess or obsolete inventories to their estimated realizable value.

Property and Equipment. Property and equipment are carried at cost. Depreciation and amortization of assets are provided primarily under the straight-line method over the shorter of the estimated useful lives or the lease terms as follows:

	Number of Years
Building	40
Machines	7-10
Shop and office equipment	3-7
Leasehold improvements	3-40

Total depreciation expense for the years ended October 31, 2009, 2008 and 2007 was $2.1 million, $1.5 million, and $1.4 million, respectively.

Revenue Recognition. We recognize revenue from sales of our products upon delivery of the products to the customers, which is normally at the time of shipment, because persuasive evidence of an arrangement exists, delivery has occurred, the selling price is fixed and determinable and collectability is reasonably assured. In certain foreign locations, we retain title after shipment under a “retention of title” clause solely to protect collectability. The retention of title is similar to UCC filings in the United States and provides the creditor with additional rights to the machine if the customer fails to pay. Revenue recognition at the time of shipment is appropriate in this instance as long as all risks of ownership have passed to the buyer. Our principal products are general-purpose computer controlled machine tools that are typically used in stand-alone operations. Transfer of ownership and risk of loss are not contingent upon contractual customer acceptance. Prior to shipment, we test each machine to ensure the machine’s compliance with standard operating specifications as listed in our sales literature.

Depending upon geographic location, after shipment a machine may be installed at the customer’s facilities by a distributor, independent contractor or Hurco service technician. In most instances where a machine is sold through a distributor, we have no installation involvement. If sales are direct or through sales agents, we will typically complete the machine installation, which consists of the reassembly of certain parts that were removed for shipping and the re-testing of the machine to ensure that it is performing within the standard specifications. We consider the machine installation process inconsequential and perfunctory. Service fees from maintenance contracts are deferred and recognized in earnings on a pro rata basis over the term of the contract.

Allowance for Doubtful Accounts. The allowance for doubtful accounts is based on our best estimate of probable credit issues and historical experience.

Software Revenue Recognition. Sales related to software products are recognized when shipped in conformity with American Institute of Certified Public Accountants’ Statement of Position 97-2. The software does not require production, modification or customization. At the time of shipment, persuasive evidence of an arrangement exists, delivery has occurred, the selling price is fixed and determinable and collectability is reasonably assured.

Product Warranty. Expected future product warranty expense is recorded when the product is sold. See Note 12 of Notes to Consolidated Financial Statements on further discussion of warranties.

Research and Development Costs. The costs associated with research and development programs for new products and significant product improvements are expensed as incurred and are included in Selling, eneral and Administrative Expenses. Research and development expenses totaled $2.5 million, $3.0 million, and $3.1 million, in fiscal 2009, 2008, and 2007, respectively.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

Costs incurred to develop computer software products and significant enhancements to software features of existing products to be sold or otherwise marketed are capitalized, after technological feasibility is established. Software development costs are amortized to Cost of Sales on a straight-line basis over the estimated product life of the related software, which ranges from three to five years. We capitalized costs of $2.0 million in 2009, $934,000 in 2008, and $1.2 million in 2007 related to software development projects. Amortization expense was $1.2 million, $1.2 million, and $702,000, for the years ended October 31, 2009, 2008, and 2007, respectively. Accumulated amortization at October 31, 2009 and 2008 was $6.1 million and $4.9 million, respectively. Estimated amortization expense for the existing amortizable intangible assets for the years ending October 31, is as follows (in thousands):

Fiscal Year	Amortization Expense
2010	$	1,170
2011		1,170
2012		711
2013		68
2014		29

Impairment of Long-Lived Assets. The Company periodically evaluates the carrying value of long-lived assets to be held and used, including property and equipment and software development costs, when events or circumstances warrant such a review. The carrying value of a long-lived asset (or group of assets) to be held and used is considered impaired when the anticipated separately identifiable undiscounted cash flows from such an asset (or group of assets) are less than the carrying value of the asset (or group of assets) in accordance with FASB guidance related to accounting for the impairment or disposal of long-lived assets.

Earnings Per Share. Basic and diluted earnings per common share are based on the weighted average number of shares of our common stock outstanding. Diluted earnings per common share give effect to shares underlying outstanding stock options using the treasury method. The dilutive number of shares for the year ended October 31, 2009, 2008 and 2007 was 0, 29,000 and 58,000, respectively.

	Three Months Ended										Twelve Months Ended
	October 31,										October 31,
(in thousands, except per share amount)	2009						2008				2009						2008

	Basic			Diluted			Basic		Diluted		Basic			Diluted			Basic		Diluted

Net income (loss)	$	(1,163	)	$	(1,163	)	$	3,422	$	3,422	$	(2,321	)	$	(2,321	)	$	20,520	$	20,520

Weighted average shares outstanding		6,441			6,441			6,415		6,415		6,429			6,429			6,415		6,415
Assumed issuances under stock options plans		—			—			—		21		—			—			—		29
		6,441			6,441			6,415		6,436		6,429			6,429			6,415		6,444
Income (loss) per common share	$	(0.18	)	$	(0.18	)	$	0.51	$	0.50	$	(0.36	)	$	(0.36	)	$	3.51	$	3.49

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

Income Taxes. We record income taxes under FASB guidance related to accounting for income taxes. This guidance utilizes the liability method for computing deferred income taxes. Under this method, the amount of taxes currently payable or refundable are accrued and deferred tax assets and liabilities are recognized for the estimated future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax basis. Deferred tax assets are also recognized for realizable loss and tax credit carryforwards. Deferred tax assets and liabilities are measured using enacted income tax rates in each jurisdiction in effect for the year in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in income tax rates is recognized in the Company’s Consolidated Statements of Operations in the period that includes the enactment date.

Estimates. The preparation of financial statements in conformity with U.S. Generally Accepted Accounting Principles requires us to make estimates and assumptions that affect the reported amounts presented and disclosed in our consolidated financial statements. Significant estimates and assumptions in these consolidated financial statements require the exercise of judgment and are used for, but not limited to, allowance for doubtful accounts, estimates of future cash flows and other assumptions associated with intangible and long-lived asset impairment tests, useful lives for depreciation and amortization, warranty programs, income taxes and deferred tax valuation allowances, lease classification, and contingencies. Due to the inherent uncertainty involved in making estimates, actual results reported in future periods may be different from these estimates.

Stock Based Compensation. We account for share-based compensation according to FASB guidance relating to share based payments, which requires the measurement and recognition of compensation expense for all share-based awards made to employees and directors based on estimated fair values on the grant date. This guidance requires that we estimate the fair value of share-based awards on the date of grant and recognize as expense the value of the portion of the award that is ultimately expected to vest over the requisite service period.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

2. BUSINESS OPERATIONS

Nature of Business. We design and manufacture computer control systems, software and computerized machine tools for sale through our own distribution system to the worldwide machine tool industry. The machine tool industry is highly cyclical and declines in demand can and will occur abruptly in the geographic markets we serve. As a result, we have recently experienced a significant decline in our sales and orders during fiscal 2009 that significantly adversely affected our results of operations.

The end market for our products consists primarily of precision tool, die and mold manufacturers, independent job shops, and specialized short-run production applications within large manufacturing operations. Industries served include: aerospace, defense, medical equipment, energy, automotive/transportation, electronics and computer industries. Our products are sold through independent agents and distributors throughout North America, Europe and Asia. We also have our own direct sales and service organizations in Canada, China, France, Germany, Italy, Poland, Singapore, South Africa, Spain, the United Kingdom, and certain areas of the United States.

Credit Risk. We sell products to customers located throughout the world. We perform ongoing credit evaluations of customers and generally do not require collateral. Allowances are maintained for potential credit losses. Concentration of credit risk with respect to trade accounts receivable is limited due to the large number of customers and their dispersion across many geographic areas. Although a significant amount of trade receivables are with distributors primarily located in the United States, no single distributor or region represents a significant concentration of credit risk.

Manufacturing Risk. Our wholly owned subsidiaries in Taiwan and China, Hurco Manufacturing Ltd. (HML) and Ningbo Hurco Manufacturing Limited (NHML), produce all of our machine tools. Any interruption in manufacturing at either of these locations would have an adverse effect on our financial operating results. Interruption in manufacturing at one of these locations could result from a change in the political environment or a natural disaster, such as an earthquake, typhoon, or tsunami. Any interruption with one of our key suppliers may also have an adverse effect on our operating results and our financial condition.

3. SHORT-TERM INVESTMENTS

As of October 31, 2008 we held $6.7 million face amount of auction rate securities, which represented indirect interest in student loan obligations and municipal bonds. These securities were intended to provide liquidity via an auction process that would reset the applicable interest rate at predetermined intervals, allowing a holder to either roll over the investment or to sell the securities at par value. We classified our auction rate securities as “available for sale” in accordance with the provisions of FASB guidance related to accounting for certain investments in debt and equity securities.

During fiscal 2008, we recorded an unrealized loss of $202,000 on our investment in these securities, net of tax, in Accumulated Other Comprehensive Loss, as we had concluded there was a temporary decline in the estimated fair value of the securities. In the first quarter of fiscal 2009, we sold all of our holdings of auction rate securities at par value and, accordingly, we reversed our previously–recorded unrealized loss on the securities. As a result, no gain or loss was recognized in our statement of operations for the year ended October 31, 2009, on the sale of the securities.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – Continued

4. INVENTORIES

Inventories as of October 31, 2009 and 2008 are summarized below (in thousands):

	2009		2008
Purchased parts and sub assemblies	$	14,961	$	13,098
Work-in-process		3,559		11,243
Finished goods		41,761		42,027
	$	60,281	$	66,368

5. DEBT AGREEMENTS

As of October 30, 2009, we amended (the "Amendment") our U.S. Credit Agreement, dated as of December 7, 2007. As amended, we have an unsecured revolving credit and letter of credit facility (the “U.S. Facility”) of $15.0 million, with maximum outstanding letters of credit under the U.S. Facility of $3.0 million. The U.S. Facility matures on December 7, 2012. The U.S. Credit Agreement also provides for a separate uncommitted demand credit facility in the amount of New Taiwan Dollars 100.0 million (the “Taiwan Facility”).

Borrowings under the U.S. Facility will bear interest at a LIBOR-based rate or a floating rate based on the prime rate, in each case, plus an applicable margin. The floating rate will not be less than a one month LIBOR-based rate plus 2.50% per annum. When our consolidated net income for the four most recently reported consecutive fiscal quarters is:

(i) equal to or greater than $0.00 (a "No Loss Four Quarter Period"), the applicable margins are determined by reference to the ratio of the total consolidated interest-bearing debt and obligations and the undrawn face amount of all letters of credit outstanding ("consolidated total indebtedness"), to consolidated EBITDA (as defined in the U.S. Credit Agreement); and

(ii) less than $0.00 (a "Net Loss Four Quarter Period"), the applicable margins are determined based on the ratio of the positive remainder, if any, of the aggregate cash and cash equivalent investments, on a

consolidated basis, minus the consolidated total indebtedness, to an amount equal to two (2) times the consolidated net loss (stated as an absolute value) for the two consecutive fiscal quarters ending at the close of such four quarter period (the "Excess Cash to Annualized Net Loss Ratio").

As amended, the U.S. Credit Agreement limits our ability to declare and pay dividends, incur additional indebtedness and make acquisitions following the occurrence of a Net Loss Four Quarter Period, which limitations remain in effect until there occurs a No Loss Four Quarter Period. The U.S. Credit Agreement also contains financial covenants including a maximum ratio of consolidated total indebtedness to total indebtedness and net worth remains applicable as of the close of the last fiscal quarter of each No Loss Four Quarter Period. For the last fiscal quarter of a Net Loss Four Quarter Period, we must achieve an Excess Cash to Annualized Net Loss Ratio of not less than 1.00 to 1.00.

We are also party to a £1.0 million revolving credit facility in the United Kingdom and a €1.5 million revolving credit facility in Germany. As of October 31, 2009, we had no debt or borrowings outstanding under our domestic or foreign credit facilities. As of October 31, 2008, we had $615,000 of outstanding letters of credit issued to non-U.S. suppliers for inventory purchase commitments. As of October 31, 2009, we had unutilized credit facilities of $21.9 million available for either direct borrowings or commercial letters of credit.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

6. FINANCIAL INSTRUMENTS

The carrying amounts for trade receivables and payables approximate their fair values. We also have financial instruments in the form of foreign currency forward exchange contracts as described in Note 1 of Notes to Consolidated Financial Statements. The U.S. Dollar equivalent notional amount of these contracts was $50.8 million and $128.2 million at October 31, 2009 and 2008, respectively. The fair value of Derivative Assets recorded on our Consolidated Balance Sheets at October 31, 2009 and 2008 was $376,000 and $12.5 million, respectively. The fair value of Derivative Liabilities recorded on our Consolidated Balance Sheets at October 31, 2009 and 2008 was $2.2 million and $2.7 million, respectively.

The future value of the foreign currency forward exchange contracts and the related currency positions are subject to offsetting market risk resulting from foreign currency exchange rate volatility. The counterparties to these contracts are substantial and creditworthy financial institutions. We do not consider either the risk of counterparty non-performance or the economic consequences of counterparty non-performance as material risks.

On November 1, 2008, we adopted FASB guidance related to fair value measurements it relates to financial assets and liabilities recorded on a recurring basis. The FASB has delayed the effective date of guidance for nonfinancial assets and liabilities, except for items that are recognized or disclosed at fair value in the financial statements on a recurring basis. We do not expect that the full adoption of this guidance will have a material impact on our consolidated financial statements.

This guidance established a three-tier fair value hierarchy, which categorizes the inputs used in measuring fair value. These tiers include: Level 1, defined as observable inputs, such as quoted prices in active markets; Level 2, defined as inputs other than quoted prices in active markets that are either directly or indirectly observable; and Level 3, defined as unobservable inputs in which little or no market data exist, therefore requiring an entity to develop its own assumptions.

In accordance with this guidance, the following table represents the fair value hierarchy for our financial assets and liabilities measured at fair value as of October 31, 2009 (in thousands):

	Level I		Level II		Level III		Total
Assets:
Derivative Assets	$	—	$	376	$	—	$	376

	Level I		Level II		Level III		Total
Liabilities:
Derivative Liabilities	$	—	$	2,234	$	—	$	2,234

Included as Level II fair value measurements are derivative assets and liabilities related to hedged and unhedged gains and losses on foreign currency forward exchange contracts entered into with a third party. We estimate the fair value of these derivatives on a recurring basis using foreign currency exchange rates obtained from active markets.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

7. INCOME TAXES

In the fiscal years set forth below, the provision (benefit) for income taxes consisted of the following:

(in thousands)	Year Ended October 31
	2009			2008			2007

Current:
U.S. taxes	$	(5,512	)	$	8,768		$	9,290
Foreign taxes		1,197			3,926			3,802
		(4,315	)		12,694			13,092
Deferred:
U.S. taxes		2,954			(1,163	)		(1,657	)
Foreign taxes		(130	)		115			441
		2,824			(1,048	)		(1,216	)
	$	(1,491	)	$	11,646		$	11,876

A comparison of income tax expense at the U.S. statutory rate of 35% in 2009, 2008 and 2007, to the Company’s effective tax rate is as follows:

Income (Loss) before income taxes (in thousands):	Year Ended October 31
	2009			2008			2007
Domestic	$	(7,097	)	$	20,856		$	20,463
Foreign		3,286			13,310			12,302
Earnings (Loss) before taxes on income	$	(3,812	)	$	34,166		$	32,765
Tax rates:
U.S. statutory rate		35.0	%		35.0	%		35.0	%
Effect of tax rate of international jurisdictions in excess of (less than) U.S. statutory rates		4.4	%		(1.9	)%		0.1	%
Valuation allowance		(2.2	)%		—			—
State income taxes		4.7	%		1.9	%		2.4	%
Permanent items		(12.5	)%		0.1	%		0.8	%
FIN48 Statute expiration		3.4	%		—			—
All other		6.3	%		(1.0	)%		(2.1	)%
Effective tax rate		39.1	%		34.1	%		36.2	%

We have not provided any U.S. income taxes on the undistributed earnings of our foreign subsidiaries or equity method investments based upon our determination that such earnings will be indefinitely reinvested. Estimated undistributed earnings of foreign investments and subsidiaries at October 31, 2009 are approximately $34.6 million. In the event these earnings are later distributed to the U.S., such distributions could result in additional U.S. tax that may be offset, at least in part by associated foreign tax credits.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

Deferred income taxes are determined based on the difference between the amounts used for financial reporting purposes and tax basis of assets and liabilities using enacted tax rates in effect for the year in which the differences are expected to reverse. Significant components of our deferred tax assets and liabilities at October 31, 2009 and 2008 were as follows (in thousands):

	October 31
	2009			2008
Deferred Tax Assets and Other:
Current:
Inter-company profit in inventory	$	3,220		$	5,575
Derivative liabilities (assets)		268			(2,477	)
Accrued inventory reserves		1,068			1,070
Accrued warranty expenses		59			148
Deferred compensation		283			264
Other accrued expenses		286			864
Foreign net operating loss carry forward		86			-
Other		706			-
		5,976			5,444
Less: Valuation allowance on foreign net operating loss carry forward		(86	)		-
Current deferred tax assets and other, net		5,890			5,444

Deferred Tax Liabilities:
Non-current:
Property and equipment and capitalized software development costs		(3,036	)		(2,717	)
Other		466			661
Non-current deferred tax liabilities, net		(2,570	)		(2,056	)

Net deferred tax asset	$	3,320		$	3,388

On November 1, 2007, we adopted FASB guidance clarifying the accounting for uncertainty in income tax positions. As a result of adoption, there was no change to beginning retained earnings. A reconciliation of the beginning and ending amount of unrecognized tax benefits, excluding the related accrual for interest or penalties, is as follows (in thousands):

	2009			2008
Balance, beginning of year	$	613		$	576
Additions based on tax positions related to the current year		15
Additions for tax positions of prior years		51			40
Reduction for tax positions of prior years		-			-
Settlements		-			-
Reductions due to statute expiration		(105	)		(3	)

Balance, end of year	$	574		$	613

We had $574,000 of unrecognized tax benefits at October 31, 2009, that if recognized, would favorably affect the effective tax rate in future periods. Any adjustments to our reserves for income taxes will be recorded as an increase or decrease to our provision for income taxes and would impact our effective tax rate.

We recognize accrued interest and penalties related to unrecognized tax benefits as components of our income tax provision. We believe there is substantial support for taking these tax benefits and therefore have estimated no tax penalties. As of October 31, 2009, the gross amount of interest accrued, reported in other liabilities, was approximately $97,000, which did not include the federal tax benefit of interest deductions.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

The statute of limitation with respect to unrecognized tax benefits will expire between July 2010 and July 2013. We anticipate a reduction of $482,000 due to statute expiration during the next fiscal year.

We or one of our subsidiaries files U.S. federal and/or state income tax returns as well as tax returns in one or more foreign jurisdictions. A summary of open tax years by major jurisdiction is presented below:

United States federal	Fiscal 2006 through the current period
Indiana	Fiscal 2006 through the current period
California	Fiscal 2005 through the current period
Germany¹	Fiscal 2005 through the current period
Taiwan	Fiscal 2004 through the current period

¹ Includes federal as well as state, provincial or similar local jurisdictions, as applicable.

8. EMPLOYEE BENEFITS

We have defined contribution plans that include a majority of our employees, under which our contributions are discretionary. The purpose of these plans is generally to provide additional financial security during retirement by providing employees with an incentive to save throughout their employment. Our contributions to the plans are based on employee contributions or compensation. As of April 1, 2009, we suspended our discretionary contributions to the plans for an indefinite period. Our contributions totaled $443,800, $877,600, and $460,200, for the fiscal years ended October 31, 2009, 2008 and 2007, respectively.

9. STOCK OPTIONS

In March 2008, we adopted the Hurco Companies, Inc. 2008 Equity Incentive Plan (the “2008 Plan”), which allows us to grant awards of stock options, Stock Appreciation Rights settled in stock (SARs), restricted shares, performance shares and performance units. The 2008 Plan replaced the 1997 Stock Option and Incentive Plan (the “1997 Plan”) which expired in March 2007. The Compensation Committee of the Board of Directors has authority to determine the officers, directors and key employees who will be granted awards; designate the number of shares subject to each award; determine the terms and conditions upon which awards will be granted; and prescribe the form and terms of award agreements. We have granted stock options under both plans which are currently outstanding. No stock option may be exercised more than ten years after the date of grant or such shorter period as the Compensation Committee may determine at the date of grant. The total number of shares of our common stock that may be issued as awards under the 2008 Plan is 750,000. The market value of a share of our common stock, for purposes of the 2008 Plan, is the closing sale price as reported by the Nasdaq Global Select Market on the date in question or, if not a trading day, on the last preceding trading date.

During fiscal 2009, 2008 and 2007, we recorded approximately $246,000, $535,000 and $480,000, respectively, of stock-based compensation expense related to grants under the plans. As of October 31, 2009, there was approximately $163,000 of total unrecognized stock-based compensation cost that we expect to recognize by the end of fiscal 2014.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – Continued

During fiscal 2009, options to purchase 20,000 shares were exercised, resulting in cash proceeds of approximately $43,000 and an additional tax benefit of approximately $26,000, compared to 28,631 shares and 45,700 shares exercised in 2008 and 2007 resulting in cash proceeds of approximately $151,000 and $186,700 for those fiscal years and additional tax benefits of approximately $36,000 and $298,000, respectively.

On April 16, 2009, the Compensation Committee granted a total of 21,000 options under the 2008 Plan to three new employees. The fair value of the options was estimated on the date of grant using a Black-Scholes valuation model with assumptions for expected volatility based on the historical volatility of our common stock of 69%, the expected term of the options, dividend yield rate of 0% and a risk-free interest rate based upon the five-year U.S. Treasury yield as of the date of grant of 1.8%. The options granted to the employees vest over a five-year period beginning one year from the date of grant. Based upon the foregoing factors, the grant date fair value of the options was determined to be $8.62 per share.

On May 28, 2008, the Compensation Committee granted fully vested options with respect to 5,000 shares under the 2008 Plan to each of two new directors. The fair value of options awarded was estimated on the date of grant using a Black-Scholes valuation model with assumptions for expected volatility based on the historical volatility of our common stock of 88%, expected term of the options, dividend yield rate of 0% and a risk-free interest rate based upon a three-year U.S. Treasury yield as of the date of grant of 2.7%. The directors’ options were granted with immediate vesting as of the date of grant. Based upon the foregoing factors, the fair value of the options was determined to be $30.71 per share.

On November 16, 2006, the Compensation Committee granted options with respect to an aggregate of 40,000 shares under the 1997 Plan to two new employees and two new directors. The fair value of options awarded was estimated on the date of grant using a Black-Scholes valuation model with assumptions for expected volatility based on the historical volatility of our common stock, expected term of the options and a risk-free interest rate based upon a three-year U.S. Treasury yield as of the date of grant. The options granted to employees vest in three equal annual installments and the directors’ options were granted with immediate vesting as of the date of grant. Based upon the foregoing factors, the fair value of the options was determined to be $22.84 and $24.97 for employees and directors, respectively.

A summary of the status of the options as of October 31, 2009, 2008 and 2007 and the related activity for the year is as follows:

	Shares Under Option			Weighted Average Exercise Price Per Share

Balance October 31, 2006		88,700		$	2.46
Granted		40,000			26.69
Cancelled		—			—
Expired		—			—
Exercised		(45,700	)	$	4.08

Balance October 31, 2007		83,000		$	13.24
Granted		10,000			35.83
Cancelled		—			—
Expired		—			—
Exercised		(28,631	)	$	5.26

Balance October 31, 2008		64,369		$	20.29
Granted		21,000			14.88
Cancelled		—			—
Expired		—			—
Exercised		(20,000	)	$	2.15

Balance October 31, 2009		65,369		$	24.11

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

The total intrinsic value of stock options exercised during the twelve months ended October 31, 2009, 2008 and 2007 was approximately $0.3 million, $0.5 million and $2.4 million respectively.

As of October 31, 2009, the total intrinsic value of outstanding stock options already vested and expected to vest and the intrinsic value of options that are outstanding and exercisable as of October 31, 2009 was $28,000. Stock options outstanding and exercisable on October 31, 2009, are as follows:

Range of Exercise Prices Per Share	Shares Under Option		Weighted Average Exercise Price Per Share		Weighted Average Remaining Contractual Life in Years
Outstanding
$ 2.15		500	$	2.15		2.1
14.88		21,000		14.88		9.5
26.69		33,869		26.69		7.0
35.83		10,000		35.83		8.6
$ 2.15 – 35.83		65,369	$	24.11		7.5
Exercisable
$ 2.15		500	$	2.15		2.1
14.88		—		14.88		—
26.69		23,869		26.69		4.7
35.83		10,000		35.83		8.6
$ 2.15 – 35.83		34,369	$	28.99		6.2

10. RELATED PARTY TRANSACTIONS

During fiscal 2007, we sold our 24% ownership interest in Quaser Machine Tools, Inc., a Taiwan contract for $2.1 million, which was approximately our carrying value. We did not recognize any material financial gain or loss as a result of this transaction, but, did recognize a tax gain on the sale of the investment that resulted in a tax liability of $740,000. Our purchases of product from this manufacturer totaled $3.4 million for the year ended October 31, 2007. Our sales of product to this manufacturer were $176,000 in fiscal 2007.

As of October 31, 2009, we owned approximately 35% of the outstanding shares of another Taiwanese-based contract manufacturer, Hurco Automation, Ltd. (HAL). HAL’s scope of activities includes the design, manufacture, sales and distribution of industrial automation products, software systems and related components, including control systems and components produced under contract for sale exclusively to us. We are accounting for this investment using the equity method. The investment of $2.3 million and $2.6 million at October 31, 2009 and 2008 is included in Investments and Other Assets, Net on the Consolidated Balance Sheets. Purchases of product from HAL amounted to $2.9 million, $10.3 million and $11.7 million in 2009, 2008 and 2007, respectively. Sales of product to HAL were $0.3 million, $2.0 million and $1.9 million for the years ended October 31, 2009, 2008 and 2007, respectively. Trade payables to HAL were $342,000 and $1.6 million at October 31, 2009 and 2008, respectively. Trade receivables from HAL were $50,000 and $296,000 at October 31, 2009 and 2008, respectively.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

Summary financial information for these two related parties is as follows:

(in thousands)	2009			2008		2007 (1)
Net Sales	$	3,710		$	11,935	$	58,053
Gross Profit		488			1,883		10,061
Operating Income (Loss)		(689	)		159		3,757
Net Income (Loss)		(1,203	)		147		3,467

Current Assets	$	6,110		$	8,658	$	36,945
Non-current Assets		1,742			2,195		10,636
Current Liabilities		1,211			3,176		18,785

(1) Financial information for Quaser Machine Tools for fiscal 2007 includes financial information through the date of sale.

11. CONTINGENCIES AND LITIGATION

12. GUARANTEES AND PRODUCT WARRANTIES

We follow FASB guidance for accounting for contingencies, relating to the guarantor’s accounting for, and disclosures of, the issuance of certain types of guarantees.

From time to time, our subsidiaries guarantee third party payment obligations in connection with the sale of certain machines to customers that use financing. At October 31, 2009, we had 53 outstanding third party guarantees totaling approximately $2.4 million in guaranteed financing. The terms of our subsidiaries guarantees are consistent with the underlying customer financing terms. Upon shipment, the customer has the risk of ownership. The customer does not obtain title until they have paid for the machine. A retention of title clause allows us to obtain the machine if the customer defaults on the lease. We believe that the proceeds obtained from the sale of a repossessed machine would cover any payments required by the guarantee. We accrue for potential liabilities when we believe a loss is probable and can be estimated.

We provide warranties on our products with respect to defects in material and workmanship. The terms of these warranties are generally one year for machines and shorter periods for service parts. We recognize a reserve with respect to this obligation at the time of product sale, with subsequent warranty claims recorded against the reserve. The amount of the warranty reserve is determined based on historical trend experience and any known warranty issues that could cause future warranty costs to differ from historical experience. A reconciliation of the changes in our warranty reserve is as follows (in thousands):

	2009			2008
Balance, beginning of year	$	2,536		$	2,449
Provision for warranties during the period		799			2,944
Charges to the accrual		(2,096	)		(2,666	)
Impact of foreign currency translation		47			(189	)
Balance, end of year	$	1,286		$	2,536

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

13. OPERATING LEASES

We lease facilities, certain equipment and vehicles under operating leases that expire at various dates through 2017. Future payments required under operating leases as of October 31, 2009, are summarized as follows (in thousands):

2010	$	1,915
2011		1,224
2012		778
2013		581
2014		282
Total	$	4,780

Lease expense for the years ended October 31, 2009, 2008, and 2007 was $3.0 million, $2.6 million, and $2.3 million, respectively.

We recorded approximately $175,000 of lease income during fiscal 2009 from leasing 50,000 square feet of our Indianapolis facility. The lease expires on October 31, 2011.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

14. QUARTERLY HIGHLIGHTS (Unaudited)

	First Quarter			Second Quarter			Third Quarter			Fourth Quarter
2009 (In thousands, except per share data)

Sales and service fees	$	28,307		$	20,489		$	19,039		$	23,181

Gross profit		8,542			5,220			5,251			6,815

Gross profit margin		30.2	%		25.5	%		27.6	%		29.4	%

Selling, general and administrative expenses		8,029			7,518			7,200			8,127

Operating income (loss)		513			(2,298	)		(1,949	)		(1,312	)

Provision (benefit) for income taxes		195			(207	)		(552	)		(927	)

Net income (loss)		354			(281	)		(1,231	)		(1,163	)

Income (loss) per common share – basic	$	0.06		$	(0.04	)	$	(0.19	)	$	(0.18	)

Income (loss) per common share – diluted	$	0.05		$	(0.04	)	$	(0.19	)	$	(0.18	)

	First Quarter			Second Quarter			Third Quarter			Fourth Quarter
2008 (In thousands, except per share data)

Sales and service fees	$	60,923		$	58,285		$	57,318		$	47,468

Gross profit		24,857			20,331			20,879			16,550

Gross profit margin		40.8	%		34.9	%		36.4	%		34.9	%

Selling, general and administrative expenses		12,376			11,676			11,829			10,930

Operating income		12,481			8,655			9,050			5,620

Provision for income taxes		4,522			3,054			2,954			1,116

Net income		7,805			5,467			5,826			3,422

Income per common share – basic	$	1.22		$	0.85		$	0.91		$	0.51

Income per common share – diluted	$	1.21		$	0.85		$	0.90		$	0.50

15. SEGMENT INFORMATION

We operate in a single segment: industrial automation equipment. We design and produce interactive computer control systems and software and computerized machine tools for sale through our own distribution network to the worldwide metal working market. We also provide software options, control upgrades, accessories and replacement parts for our products, as well as customer service and training support.

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

We sell our products through more than 100 independent agents and distributors throughout North America, Europe and Asia. Our line is the primary line for the majority of our distributors globally even though some may carry competitive products. We also have our own direct sales and service organizations in Canada, China, France, Germany, Italy, Poland, Singapore, South Africa, Spain, the United Kingdom, and certain areas of the United States, which are among the world's principal machine tool consuming countries. During fiscal 2009, no distributor accounted for more than 5% of our sales and service fees. In fiscal 2009, more than 70% of our revenues were from overseas customers and no single end-user of our products accounted for more than 5% of our total sales and service fees.

The following table sets forth the contribution of each of our product groups to our total sales and service fees during each of the past three fiscal years (in thousands):

Net Sales and Service Fees by Product Category	Year ended October 31,
	2009			2008		2007

Computerized Machine Tools		$	75,213	$	199,238	$	165,832
Computer Control Systems and Software *			2,546		5,678		5,291
Service Parts			8,851		13,240		12,096
Service Fees			4,406		5,838		4,828
Total		$	91,016	$	223,994	$	188,047

*Amounts shown do not include computer control systems and software sold as an integrated component of computerized machine systems.

The following table sets forth revenues by geographic area, based on customer location, for each of the past three fiscal years (in thousands):

Revenues by Geographic Area	Year Ended October 31
	2009		2008		2007

North America	$	25,203	$	48,087	$	50,010

Germany		26,273		81,945		58,860
United Kingdom		11,242		20,877		19,326
Italy		4,969		10,329		9,389
France		4,486		13,412		11,019
Other Europe		11,372		36,202		25,856
Total Europe		58,342		162,765		124,450

Asia		5,557		11,816		12,493
Other Foreign		1,914		1,326		1,094
Total Foreign		65,813		175,907		138,037
	$	91,016	$	223,994	$	188,047

Long-lived tangible assets, net by geographic area were (in thousands):

	As of October 31
	2009		2008
United States	$	7,942	$	8,421
Foreign countries		7,048		6,996
	$	14,990	$	15,417

HURCO COMPANIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - Continued

Net assets by geographic area were (in thousands):

	As of October 31
	2009		2008
North America	$	63,659	$	73,793
Europe		41,824		36,008
Asia		14,893		13,676
	$	120,376	$	123,477

16. NEW ACCOUNTING PRONOUNCEMENTS

In December 2007, the FASB issued guidance that changed the way in which we account for business combinations as it introduces new purchase accounting concepts, expands the use of fair value accounting related to business combinations and changes the subsequent period accounting for certain acquired assets and liabilities, and among other things, includes a substantial number of new disclosure requirements. This guidance will be applied prospectively on business combinations with acquisition dates in fiscal years beginning on or after December 15, 2008. This guidance may have a material impact on our financial statements if we make future acquisitions.

In December 2007, the FASB issued guidance that changed the accounting and reporting for minority interests, which have been recharacterized as noncontrolling interests and classified as a component of equity. This guidance required retroactive adoption of the presentation and disclosure requirements for existing minority interests. This guidance became effective for our 2009 fiscal year and interim periods within 2009. The adoption did not have a material impact on our consolidated financial statements or results of operations.

In May 2009, we adopted FASB guidance that established general standards of accounting for and disclosure of events that occur after the balance sheet date but before financial statements are issued or are available to be issued. This guidance introduced new terminology but is based on the same principles that previously existed in the auditing standards. This guidance requires disclosure of the date through which we have evaluated subsequent events and whether that date represents the date the financial statements were issued or the date the financial statements were available to be issued. We issued our financial statements by filing with the Securities Exchange Commission on January 12, 2010, for the year ended October 31, 2009 and we have evaluated subsequent events through the time of the filing.

Effective for interim and annual periods ending after September 15, 2009, the FASB has defined a new hierarchy for U.S. GAAP and established the FASB Accounting Standards Codification (ASC) as the sole source for authoritative guidance to be applied by nongovernmental entities. The adoption of the ASC changes the manner in which U.S. GAAP guidance is referenced, but it did not have any impact on our financial position or results of operations.

Item 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON

ACCOUNTING AND FINANCIAL DISCLOSURE

None.

Item 9A. CONTROLS AND PROCEDURES

Under the supervision and with the participation of management, including our Chief Executive Officer and Chief Financial Officer, we carried out an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures as of October 31, 2009, pursuant to Rule 13a-15(b) under the Securities Exchange Act of 1934, as amended. Based upon that evaluation, our management, including the Chief Executive Officer and Chief Financial Officer, concluded that our disclosure controls and procedures were effective as of the evaluation date.

There have been no changes in our internal controls over financial reporting that occurred during the fourth quarter of the fiscal year ended October 31, 2009 that have materially affected, or are reasonably likely to materially affect, our internal controls over financial reporting.

Item 9B. OTHER INFORMATION

During the fourth quarter of fiscal 2009, the Audit Committee of the Board of Directors did not engage our independent registered public accounting firm to perform any non-audit services. This disclosure is made pursuant to Section 10A(i)(2) of the Securities Exchange Act of 1934, as added by Section 202 of the Sarbanes-Oxley Act of 2002.

The following graph illustrates the cumulative total shareholder return on our common stock for the five-year period ended October 31, 2009, as compared to the Russell 2000 and a peer group consisting of traded securities for U.S. companies in the same three digit Standard Industrial Classification group as Hurco (SIC 3540-3549 – Metal Working Machinery and Equipment). The comparisons in this table are required by the SEC and are not intended to forecast or be indicative of possible future performance of our common stock.

	10/04	10/05	10/06	10/07	10/08	10/09

Hurco Companies, Inc.	100.00	124.42	181.86	398.46	157.01	110.96
Russell 2000	100.00	112.08	134.47	146.94	96.74	102.99
Peer Group - SIC Codes 3540-3549	100.00	106.59	111.11	137.94	73.10	73.45

*The stock price performance included in this graph is not necessarily indicative of future stock price performance

PART III

Item 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

The information required by this item is incorporated herein by reference to the definitive proxy statement for our 2010 annual meeting of shareholders except that the information required by Item 10 regarding our executive officers is included herein under a separate caption at the end of Part I.

Item 11. EXECUTIVE COMPENSATION

The information required by this item is incorporated herein by reference to the definitive proxy statement for our 2010 annual meeting of shareholders.

Item 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND

MANAGEMENT AND RELATED STOCKHOLDER MATTERS

Except for the information concerning equity compensation plans, the information required by this item is incorporated herein by reference to the definitive proxy statement for our 2010 annual meeting of shareholders.

Equity Compensation Plan Information

The following table gives information about our common stock that may be issued upon the exercise of options, warrants and rights under all of our existing equity compensation plans as of October 31, 2009:

Plan Category	Number of securities to be issued upon exercise of outstanding options, warrants and rights (a) (#)		Weighted-average exercise price of outstanding options, warrants and rights (b) ($)		Number of securities remaining available for future issuance under equity compensation plans (excluding securities reflected in column (a) (c) (#)
Equity compensation plans approved by security holders		65,369	$	24.11		719,000

Equity compensation plans not approved by security holders		—		—		—

Total		65,369	$	24.11		719,000

As of October 31, 2009, there were no outstanding non-qualified options that had been granted other than pursuant to a plan approved by our shareholders.

Item 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

The information required by this item is incorporated herein by reference to the definitive proxy statement for our 2010 annual meeting of shareholders.

Item 14. PRINCIPAL ACCOUNTING FEES AND SERVICES

The information required by this item is incorporated herein by reference to the definitive proxy statement for our 2010 annual meeting of shareholders.

PART IV

Item 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

(a)

Financial Statements. The following consolidated financial statements of Registrant are included herein under Item 8 of Part II:

		Page
Report of Independent Registered Public Accounting Firm – Ernst & Young LLP		28
Report of Independent Registered Public Accounting Firm – Crowe Horwath LLP		30
Consolidated Statements of Operations – years ended October 31, 2009, 2008 and 2007		31
Consolidated Balance Sheets – as of October 31, 2009 and 2008		32
Consolidated Statements of Cash Flows – years ended October 31, 2009, 2008 and 2007		33
Consolidated Statements of Changes in Shareholders’ Equity – years ended October 31, 2009, 2008 and 2007		34
Notes to Consolidated Financial Statements		35

Financial Statement Schedule. The following financial statement schedule is included in this Item.

	Page
Schedule II - Valuation and Qualifying Accounts and Reserves	57

All other financial statement schedules are omitted because they are not applicable or the required information is included in the consolidated financial statements or notes thereto.

(b)

Exhibits

Exhibits being filed with this Form 10-K or incorporated herein by reference are listed on page 58.

Schedule II - Valuation and Qualifying Accounts and Reserves

for the years ended October 31, 2009, 2008, and 2007

(Dollars in thousands)

Description	Balance at Beginning of Period		Charged to Costs and Expenses			Charged To Other Accounts		Deductions			Balance At End Of Period
Allowance for doubtful Accounts for the year ended:

October 31, 2009	$	678	$	736			—	$	605	(1)	$	809

October 31, 2008	$	751	$	(42	)		—	$	31	(2)	$	678

October 31, 2007	$	635	$	128			—	$	12	(3)	$	751

Accrued warranty expenses For the year ended:

October 31, 2009	$	2,536	$	846			—	$	2,096		$	1,286

October 31, 2008	$	2,449	$	2,755			—	$	2,666		$	2,536

October 31, 2007	$	1,926	$	2,610			—	$	2,087		$	2,449

(1) Receivable write-offs of $605,000.

(2) Receivable write-offs of $39,000, net of cash recoveries on accounts previously written off of $8,000.

(3) Receivable write-offs of $20,000, net of cash recoveries on accounts previously written off of $8,000.

EXHIBITS INDEX

Exhibits Filed. The following exhibits are filed with this report:

10.1*		Summary compensation sheet.

21		Subsidiaries of the Registrant.

23.1		Consent of Independent Registered Public Accounting Firm, Ernst & Young LLP

23.2		Consent of Independent Registered Public Accounting Firm, Crowe Horwath LLP

31.1		Certification by the Chief Executive Officer, pursuant to Rule 13a-15(b) under the Securities and Exchange Act of 1934, as amended.

31.2		Certification by the Chief Financial Officer, pursuant to Rule 13a-15(b) under the Securities and Exchange Act of 1934, as amended.

32.1		Certification by the Chief Executive Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

32.2		Certification by the Chief Financial Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

Exhibits Incorporated by Reference. The following exhibits are incorporated into this report:

3.1		Amended and Restated Articles of Incorporation of the Registrant, incorporated by reference to Exhibit 3.1 to the Registrant's Quarterly Report on Form 10-Q for the quarter ended July 31, 2000.
3.2		Amended and Restated By-Laws of the Registrant as amended through July 8, 2009, incorporated by reference to Exhibit 3.1 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended July 31, 2009.
10.2		Credit Agreement dated as of December 7, 2007, between Hurco Companies, Inc. and JP Morgan Chase Bank, N.A. incorporated by reference to Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed December 12, 2007.
10.3		First Amendment to Credit Agreement dated as of October 30, 2009, between Hurco Companies, Inc. and JP Morgan Chase Bank, N.A. incorporated by reference to Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed November 4, 2009.
10.4*		Employment Agreement between the Registrant and John G. Oblazney dated January 12, 2007, incorporated by reference to Exhibit 10.1 to the Registrant’s Annual Report on Form 10-K for the year ended October 31, 2006.

10.5*		Separation and Release Agreement between the Registrant and James D. Fabris dated October 1, 2009, incorporated by reference to Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed on October 2, 2009.
10.6*		Employment Agreement between the Registrant and Michael Doar dated November 13, 2001, incorporated by reference as Exhibit 10.2 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended January 31, 2002.
10.7*		Amended 1997 Stock Option and Incentive Plan incorporated by reference as Exhibit 10 to the Registrant’s Quarterly Report on Form 10-Q filed for the quarter ended July 31, 2005.
10.8		Hurco Companies, Inc. 2008 Equity Incentive Plan incorporated by reference to Appendix A of the Registrant’s definitive Proxy Statement on Schedule 14A filed January 28, 2008.
10.9*		Form of restated split-dollar insurance agreement incorporated by reference to Exhibit 10.2 to the Registrant’s Annual Report on Form 10-K for the year ended October 31, 2008.

*	The indicated exhibit is a management contract, compensatory plan or arrangement required to be listed by Item 601 of Regulation S-K.

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized, this 12th day of January 2010.

HURCO COMPANIES, INC.

By:		/s/ John G. Oblazney
		John G. Oblazney
		Vice-President, Secretary,
		Treasurer and
		Chief Financial Officer

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated:

Signature and Title(s)		Date

/s/ Michael Doar		January 12, 2010
Michael Doar, Chairman of the Board,
Chief Executive Officer and President
of Hurco Companies, Inc.
(Principal Executive Officer)

/s/ John G. Oblazney		January 12, 2010
John G. Oblazney
Vice-President,
Secretary, Treasurer and
Chief Financial Officer
of Hurco Companies, Inc.
(Principal Financial Officer)

/s/ Sonja K. McClelland		January 12, 2010
Sonja K. McClelland
Corporate Controller, Assistant Secretary
of Hurco Companies, Inc.
(Principal Accounting Officer)

/s/ Stephen H. Cooper		January 12, 2010
Stephen H. Cooper, Director

/s/ Robert W. Cruickshank		January 12, 2010
Robert W. Cruickshank, Director

/s/ Philip James		January 12, 2010
Philip James, Director

/s/ Michael P. Mazza		January 12, 2010
Michael P. Mazza, Director

/s/ Richard T. Niner		January 12, 2010
Richard T. Niner, Director

/s/ Charlie Rentschler		January 12, 2010
Charlie Rentschler, Director

/s/ Janaki Sivanesan		January 12, 2010
Janaki Sivanesan, Director