UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-K

 

For the fiscal year ended December 31, 2017

or

For the transition period from            to           .

Commission file number: 002-25577

 

DIODES INCORPORATED

(Exact name of registrant as specified in its charter)

 

 

Registrant’s telephone number, including area code: (972) 987-3900

Securities registered pursuant to Section 12(b) of the Act:

 

Securities registered pursuant to Section 12(g) of the Act:

None

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes    ☑  No  ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ☐    No  ☑

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ☑    No  ☐

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ☑    No  ☐

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act:

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.    ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes  ☐    No  ☑

The aggregate market value of the 38,032,787 shares of Common Stock held by non-affiliates of the registrant, based on the closing price of $18.79 per share of the Common Stock on the Nasdaq Global Select Market on June 30, 2017, the last business day of the registrant’s most recently completed second fiscal quarter, was approximately $714,636,068.

The number of shares of the registrant’s Common Stock outstanding as of February 9, 2018 was 49,140,136.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s definitive proxy statement to be filed with the United States Securities and Exchange Commission (“SEC”) pursuant to Regulation 14A in connection with the 2018 annual meeting of stockholders are incorporated by reference into Part III of this Annual Report. The proxy statement will be filed with the SEC not later than 120 days after the registrant’s fiscal year ended December 31, 2017.

 

 

 

---

 

TABLE OF CONTENTS

 

 

 

 

---

PART I

 

Item 1.Business.

GENERAL

Diodes Incorporated and its subsidiaries (collectively, the “Company” or “we” or “our”) is a leading global manufacturer and supplier of high-quality application specific standard products within the broad discrete, logic, analog and mixed-signal semiconductor markets. Diodes serves the consumer electronics, computing, communications, industrial, and automotive markets. Diodes’ products include diodes, rectifiers, transistors, MOSFETs, protection devices, function-specific arrays, logic, amplifiers and comparators, Hall-effect and temperature sensors, power management devices, including LED drivers, AC-DC converters and controllers, DC-DC switching and linear voltage regulators, and voltage references along with special function devices, such as USB power switches, load switches, voltage supervisors, and motor controllers. Diodes’ corporate headquarters and Americas’ sales office are located in Plano, Texas and Milpitas, California. Design, marketing, and engineering centers are located in Plano; Milpitas; Taipei, Taiwan; Taoyuan City, Taiwan; Zhubei City, Taiwan; Manchester, England; and Neuhaus, Germany. Diodes’ wafer fabrication facilities are located in Manchester and Shanghai, China. Diodes has assembly and test facilities located in Shanghai, Jinan, Chengdu, and Yangzhou, China, as well as in Hong Kong, China, Neuhaus and Taipei. Additional engineering, sales, warehouse, and logistics offices are located in Taipei; Hong Kong; Manchester; Shanghai; Shenzhen, China; Seongnam-si, South Korea; and Munich, Germany, with support offices throughout the world. We were incorporated in 1959 in California and reincorporated in Delaware in 1968.

We design, manufacture and market these semiconductors for diverse end-use applications. Semiconductors, which provide electronic signal amplification and switching functions, are basic building-blocks that are incorporated into almost every electronic device. We believe that our focus on application-specific standard products utilizing innovative, highly efficient packaging and cost-effective process technologies, coupled with our collaborative, customer-focused product development, gives us a meaningful competitive advantage relative to other semiconductor companies.

Our product portfolio addresses the design needs of advanced electronic equipment, including high-volume consumer electronic devices such as digital media players, smartphones, tablets, notebook computers, flat-panel displays, mobile handsets, digital cameras and set-top boxes. We believe that we have particular strength in designing innovative, highly power efficient semiconductors in miniature packaging for applications with a critical need to minimize product size while maximizing power density and overall performance, and at a lower cost than alternative solutions. Our product line includes over 25,000 products, and we shipped approximately 46 billion units, 41 billion units, and 40 billion units in 2017, 2016 and 2015, respectively. From 2012 to 2017, our net sales grew from $633.8 million to $1.1 billion, representing a compound annual growth rate of greater than 10%.

BUSINESS OUTLOOK

During 2017, we achieved our goal of $1.0 billion in annual revenue.  During 2017, we announced new goals for 2025 that include revenue of $2.5 billion with gross margin of 40%, representing gross profit of $1.0 billion. Acquisitions remain a key part of our growth strategy to reach our revenue goal. We have a solid pipeline of designs and expanded customer relationships across all regions and product lines. The success of our business depends on, among other factors, the strength of the global economy and the stability of the financial markets, our customers’ demand for our products, the ability of our customers to meet their payment obligations, the likelihood of customers not canceling or deferring existing orders, and the strength of consumers’ demand for items containing our products in the end-markets we serve. We believe the long-term outlook for our business remains generally favorable despite the uncertainties in the global economy as we continue to execute on the strategy that has proven successful for us over the years. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations - Business Outlook” in Part II, Item 7 and “Risk Factors – The success of our business depends on the strength of the global economy and the stability of the financial markets, and any weaknesses in these areas may have a material adverse effect on our net sales, operating results and financial condition.” in Part I, Item 1A of this Annual Report for additional information.  

SEGMENT INFORMATION AND ENTERPRISE-WIDE DISCLOSURES

For financial reporting purposes, we operate in a single segment, standard semiconductor products, through our various design, manufacturing and distribution facilities. We sell product primarily through our operations in Asia, North America and Europe. See Note 15 of “Notes to Consolidated Financial Statements” of this Annual Report for addition information.

OUR INDUSTRY

Semiconductors are critical components used in the manufacture of a broad range of electronic products and systems. Since the invention of the transistor in 1948, continuous improvements in semiconductor processes and design technologies have led to smaller, more complex and more reliable devices at a lower cost per function. The availability of low-cost semiconductors, together with

- 1 -

---

increased customer demand for sophisticated electronic systems, has led to the proliferation of semiconductors in diverse end-use applications.

OUR COMPETITIVE STRENGTHS

We believe our competitive strengths include the following:

Flexible, scalable and cost-effective manufacturing – Our manufacturing operations are a core element of our success, and we have designed our manufacturing base to allow us to respond quickly to changes in demand trends in the end-markets we serve. For example, we have structured our assembly and test facilities to enable us to rapidly and efficiently add capacity and adjust product mix to meet shifts in customer demand and overall market trends. In 2011, we established an additional manufacturing facility for semiconductor assembly and test in Chengdu, China, which became fully production capable during the second half of 2015. Additionally, the Shanghai and Chengdu locations of our manufacturing operations provide us with access to a workforce at a relatively low overall cost base while enabling us to better serve our leading customers, many of which are located in Asia. See “Risk Factors—During times of difficult market conditions, our fixed costs combined with lower net sales and lower profit margins may have a negative impact on our business, operating results and financial condition.” in Part I, Item 1A of this Annual Report for additional information.

Integrated packaging expertise – Our expertise in designing and manufacturing innovative and proprietary packaging solutions enables us to package a variety of different device functions into an assortment of packages ranging from miniature chip-scale packaging to packages that integrate multiple separate discrete and/or analog chips into a single semiconductor product called an array. Our ability to design and manufacture multi-chip semiconductor solutions as well as advanced integrated devices provides our customers with products of equivalent functionality with fewer individual parts, and at lower overall cost, than alternative products. This combination of integration, functionality and miniaturization makes our products well suited for high-volume consumer electronic devices such as LED televisions, LCD panels, set-top boxes and consumer portables such as smartphones, tablets and notebooks.

Broad customer base and diverse end-markets – Our customers are comprised of leading OEMs as well as major EMS providers. Overall, we serve over 375 direct customers worldwide and tens of thousands of additional customers through our 122 distributors. Our products are ultimately used in end-products in a number of markets served by our broad customer base, which we believe makes us less susceptible to market fluctuations driven by either specific customers or specific end-user applications.  

Customer focused product development – Effective collaboration with our customers and a commitment to customer service are essential elements of our business. We believe focusing on dependable delivery and support tailored to specific end-user applications has fostered deep customer relationships and created a key competitive advantage for us in the highly fragmented discrete, logic and analog semiconductor marketplace. We believe our close relationships with our customers have provided us with keener insight into our customers’ product needs. This results in a stronger demand for our product designs and often provides us with insight into additional opportunities for new design wins in our customers’ products. See “Risk Factors - We are and will continue to be under continuous pressure from our customers and competitors to reduce the price of our products, which could adversely affect our growth and profit margins” in Part I, Item 1A of this Annual Report for additional information.

Management experience – The members of our executive team average over 30 years of industry experience, and the length of their service has created significant institutional insight into our markets, our customers and our operations. See “Risk Factors—We may fail to attract or retain the qualified technical, sales, marketing, finance and management/executive personnel required to operate our business successfully, which could adversely affect  our business, operating results and financial condition.” in Part I, Item 1A of this Annual Report for additional information.

OUR STRATEGY

Our strategy is to continue to enhance our position as a leading global designer, manufacturer and supplier of high-quality application-specific standard semiconductor products, utilizing our innovative and cost-effective assembly and test (packaging) technology and leveraging our process expertise and design excellence to achieve above-market growth in profitability.

The principal elements of our strategy include the following:

Continue to rapidly introduce innovative discrete, logic and analog semiconductor products – We intend to maintain our rapid pace of new product introductions, especially for high-volume, high-growth applications with short design cycles, such as LCD and LED televisions and panels, set-top boxes, portables such as smartphones, tablets and notebooks along with other consumer electronics and computing devices, as well as added emphasis on products for the LED lighting market and the industrial and automotive markets. During 2017, we continued to achieve many significant new design wins at OEMs. Although a design win from a customer does not necessarily guarantee future sales to that customer, we believe that continued introduction of new and well-defined product solutions is critically important in maintaining and extending our market share in the highly competitive semiconductor

- 2 -

---

marketplace. See “Risk Factors – Obsolete inventories as a result of changes in demand for our products and change in life cycles of our products could adversely affect our business, operating results and financial condition.” in Part I, Item 1A of this Annual Report for additional information.

Expand our available market opportunities – We believe we have many paths to increasing our addressable market opportunity. From a product perspective, we intend to continue expanding our product portfolio by developing derivative and enhanced performance devices that target adjacent markets and end-equipment. We will continue to cultivate new and emerging customers within our targeted markets, further increasing our already broad customer base. As we focus on new customers, we try to expand our product portfolio penetration within these new, as well as existing, customers. As we expand our extensive range of high power efficiency and small form factor packages, we plan to introduce new and existing product functions in these new packages to allow an even greater market range.

Maintain intense customer focus – We intend to continue to strengthen and deepen our customer relationships. We believe that continued focus on customer service is important and will help to increase our net sales, operating performance and market share. To accomplish this, we intend to continue to closely collaborate with our customers to design products that meet their specific needs. A critical element of this strategy is to further reduce our design cycle time in order to quickly provide our customers with innovative products. Additionally, to support our customer-focused strategy, we continue to expand our sales force and field application engineers, particularly in Asia and Europe, during periods of growth. See “Risk Factors – We are and will continue to be under continuous pressure from our customers and competitors to reduce the price of our products, which could adversely affect our growth and profit margins.” in Part I, Item 1A of this Annual Report for additional information.

Enhance cost competitiveness – A key element of our success is our overall low-cost manufacturing base. While we believe our manufacturing facilities are among the most efficient in the industry, we will continue to refine our proprietary manufacturing processes and technology to achieve additional cost efficiencies. In 2011, we commenced the expansion of our capacity further by establishing an additional manufacturing facility for semiconductor assembly and test in Chengdu, China, that became fully production capable in the second half of 2015.

Pursue selective strategic acquisitions – As part of our strategy to expand our semiconductor product offerings and to maximize our market opportunities, we may acquire technologies, product lines or companies in order to enhance our product portfolio and accelerate our new product offerings. In 2015, we acquired Pericom Semiconductor Corporation. Pericom designs, develops and markets high-performance ICs and FCPs used in many of today’s advanced electronic systems. ICs include functions that support the connectivity, timing and signal conditioning of high-speed parallel and serial protocols that transfer data among a system’s microprocessor, memory and various peripherals, such as displays and monitors, and between interconnected systems. FCPs are electronic components that provide frequency references such as crystals and oscillators for computer, communication and consumer electronic products. Analog, digital and mixed-signal ICs, together with FCPs enable higher system bandwidth and signal quality, resulting in better operating reliability and signal integrity, and lower overall system cost in applications such as notebook computers, servers, network switches and routers, storage area networks, digital TVs, cell phones, GPS and digital media players.

See “Risk Factors – Part of our growth strategy involves identifying and acquiring companies. We may be unable to identify suitable acquisition candidates or consummate desired acquisitions and, if we do make any acquisitions, we may be unable to successfully integrate any acquired companies with our operations, which could adversely affect our business, operating results and financial condition” in Part I, Item 1A and Note 19 of “Notes to Consolidated Financial Statements” of this Annual Report for additional information.

OUR PRODUCTS

Our product portfolio includes over 25,000 products that are designed for use in high-volume consumer electronic devices such as LCD and LED televisions and LCD panels, set-top boxes and consumer portables such as smartphones, tablets and notebooks. Our focus is on low pin count semiconductor devices with one or more active and/or passive components. We target and serve end-equipment markets that we believe have larger volumes than other end-market segments served by the overall semiconductor industry.

Our broad product line includes:

- 3 -

---

The following table lists the end-markets, some of the applications in which our products are used, and the percentage of net sales for each end-market for the last three years:

 

PRODUCT PACKAGING

Our device packaging technology includes a wide variety of innovative surface-mounted packages. Our focus on the development of smaller, more thermally efficient, and increasingly-integrated packaging, is a critical component of our product development. We provide a comprehensive offering of miniature high power density packaging, enabling us to fit our components into smaller and more efficient packages, while maintaining the same device functionality and power handling capabilities. Smaller packaging provides a reduction in the height, weight and board space required for our components.  Our products are well suited for battery-powered, hand-held and wireless consumer electronic applications and high-volume consumer electronic devices such as LCD and LED televisions and LCD panels, set-top boxes and consumer portables such as smartphones, tablets and notebooks.

CUSTOMERS

We serve over 375 direct customers worldwide, including major OEMs and EMS providers. Additionally, we have approximately 122 distributor customers worldwide, through which we indirectly serve tens of thousands of customers. Our customers include: (i) leading OEMs in a broad range of industries, such as Continental AG, Delta Electronics, Honeywell, Osram, Phillips, Arris, Emerson, Hella, LG Electronics, Lenovo, Quanta Computer, Seagate, Sagem Communication, and Samsung Electronics; (ii) leading EMS providers, such as Celestica, Flextronics, Hon Hai Precision Industry, Inventec, Jabil Circuit, and Sanmina-SCI, who build end-market products incorporating our semiconductors for companies such as Google, GoPro, Cisco, Dell, EMC, Intel, Microsoft, Thompson, and Roche Diagnostics; and (iii) leading distributors such as Arrow, Avnet, Future Electronics, Rutronic, Yosun Industrial, DigiKey, and Zenitron.

For the years 2017, 2016 and 2015, our OEM and EMS customers together accounted for 32%, 35% and 33%, respectively, of our net sales. One customer accounted for 10% or more of our net sales in 2017, but not 10% of our outstanding accounts receivable at December 31, 2017.  No customers accounted for 10% or more of our net sales in 2016 or 2015. In addition, for information concerning our business with related parties, see “Business - Certain Relationships and Related Party Transactions.”

We believe that our close relationships with our customers have provided us with deeper insight into our customers’ product needs. In addition to seeking to expand relationships with our existing customers, our strategy is to pursue new customers and diversify our customer base by focusing on leading global consumer electronics companies and their EMS providers and distributors. See “Risk Factors – Our customers require our products to undergo a lengthy and expensive qualification process without any assurance of product sales and may demand to audit our operations from time to time.  A failure to qualify a product or a negative

- 4 -

---

audit finding could adversely affect our net sales, operating results and financial condition.” in Part I, Item 1A of this Annual Report for additional information.

We generally warrant that products sold to our customers will, at the time of shipment, be free from defects in workmanship and materials and conform to our approved specifications. Subject to certain exceptions, our standard warranty extends for a period of one year from the date of shipment. Warranty expense has not been significant. Generally, our customers may cancel orders on short notice without incurring a penalty. See “Risk Factors – Our customer orders are subject to cancellation or modification usually with no penalty. High volumes of order cancellation or reduction in quantities ordered could adversely affect our net sales, operating results and financial condition” in Part I, Item 1A of this Annual Report for additional information.

Many of our customers are based in Asia or have manufacturing facilities in Asia. Net sales by country consist of sales to customers in that country based on the country to which products are shipped. We report net sales based on “shipped to” customer locations as we believe this best represents where our customers’ business activities occur. The table below sets forth net sales by country.  “All others” represents countries with less than 3% of total net sales each.

SALES AND MARKETING

We market and sell our products worldwide through a combination of direct sales and marketing personnel, independent sales representatives and distributors. We have direct sales personnel in the U.S., the U.K., France, Germany, Korea, Hong Kong, Taiwan and China. We also have independent sales representatives in the U.S., Asia, and Europe. In addition, we have distributors in the U.S., Asia, and Europe.

As of December 31, 2017, our direct global sales and marketing organization consisted of approximately 366 employees operating out of 14 offices. We have sales and marketing offices or representatives in Taipei, Taiwan; Shanghai and Shenzhen, China; Gyeonggi, South Korea; and Munich, Germany; and we have regional sales offices in the U.S. As of December 31, 2017, we also had approximately 18 independent sales representative firms marketing our products.

Our marketing group focuses on our product strategy, product development roadmap, new product introduction process, demand assessment and competitive analysis. Our marketing programs include participation in industry tradeshows, technical conferences and technology seminars, sales training and public relations. The marketing group works closely with our sales and research and development teams to align our product development roadmap. The marketing group coordinates its efforts with our product development, operations and sales groups, as well as with our customers, sales representatives and distributors. We support our customers through our global field application engineering and customer support organizations.

Our website, www.diodes.com, features an extensive online product catalog with advanced search capabilities. This, coupled with a comprehensive competitor cross-reference search, facilitates quick and thorough product selection.  Our website also provides easy access to our worldwide sales contacts and customer support and incorporates a distributor-inventory check to provide component inventory availability.

MANUFACTURING OPERATIONS AND FACILITIES

We operate two assembly and test facilities located in Shanghai, China, one in Chengdu, China and one in Neuhaus, Germany. We have two 150mm wafer fabrication facilities located in Shanghai and one 150mm wafer fabrication facility located in Oldham, U.K.  One of our Shanghai facilities has completed qualification on the production of 200mm wafers.

During the fourth quarter of 2017 we shut down our wafer manufacturing facility located in Lee’s Summit, MO. (“KFAB”) and transferred those manufacturing activities to our wafer fabrication facilities located in Oldham and Shanghai or to outside foundries.  Total costs to shut down KFAB were approximately $10.1 million.  We will continue to recognize costs associated with the KFAB

- 5 -

---

shutdown through March 2018.  Because of lower costs and improved utilization of our internal wafer fabrication facilities we expect our annual pretax savings to be approximately $10 million to $15 million, beginning in 2018.

In 2010, we announced an investment agreement with the Management Committee of the Chengdu Hi-Tech Industrial Development Zone (the “CDHT”). Under this agreement, we formed an entity with a Chinese partner, Chengdu Ya Guang Electronic Company Limited (“Ya Guang”), to establish a semiconductor assembly and test manufacturing facility in Chengdu, China. In December 2016, we increased our investment and currently own approximately 98% of the entity. The CDHT granted the entity a 50-year land lease, provides corporate and employee tax incentives, tax refunds, subsidies and other financial support. This is a long-term, multi-year project that will provide us additional capacity as needed. As of December 31, 2017, we have invested approximately $157.2 million, primarily for infrastructure, buildings and equipment related capital expenditures.

For the years ending December 31, 2017 and 2016, our total capital expenditures were approximately $125.2 million and $52.2 million, respectively. The majority of our capital expenditures are in China.

Our manufacturing processes use many raw materials, including silicon wafers, aluminum and copper lead frames, gold and copper wire and other metals, molding compounds and various chemicals and gases. We also rely on equipment and finished product suppliers.  We are continuously evaluating our raw material costs in order to reduce our consumption while protecting and maintaining product performance. We have no material agreements with any of our suppliers that impose minimum or continuing supply obligations. From time to time, suppliers may extend lead-times, limit supplies or increase prices due to capacity constraints or other factors. Although we believe that supplies of the raw materials we use are currently and will continue to be available, shortages could occur in various essential materials due to interruption of supply or increased demand in the industry. See “Risk Factors – We depend on third-party suppliers for timely deliveries of raw materials, manufacturing services, product and process development, parts and equipment, as well as finished products from other manufacturers, and our reputation with customers, operating results and financial condition could be adversely affected if we are unable to obtain adequate supplies in a timely manner.” in Part I, Item 1A of this Annual Report for additional information.

Our corporate headquarters is located in a facility we own in Plano, Texas. We also lease or own properties around the world for use as sales and administrative offices, research and development centers, manufacturing facilities, warehouses and logistics centers. The size or location of these properties can change from time to time based on our business requirements. See “Properties” in Part I, Item 2 of this Annual Report for additional information.

BACKLOG

The amount of backlog to be shipped during any period is dependent upon various factors, and orders are subject to cancellation or modification, usually with no penalty to the customer. Orders are generally booked from one month to greater than twelve months in advance of delivery. The rate of booking of new orders can vary significantly from month to month. We, and the industry as a whole, continue to experience a trend towards shorter customer-requested lead-times, and we expect this trend to continue. The amount of backlog at any date depends upon various factors, including the timing of the receipt of orders, fluctuations in orders of existing product lines, and the introduction of any new lines. Accordingly, we believe that the amount of our backlog at any date is not an accurate measure of our future sales. We strive to maintain proper inventory levels to support our customers’ just-in-time order expectations.  Our backlog of orders, based on expected ship date, was $407.4 million at December 31, 2017 and $175.7 million at December 31, 2016.

PATENTS, TRADEMARKS AND LICENSES

Historically, patents and trademarks have not been material to our operations, but we expect them to become more important, particularly as they relate to our miniature and power efficient packaging technologies.

Our initial product patent portfolio was primarily composed of discrete technologies. In the late 1990s, our engineers began to research and develop innovative packaging technologies, which produced several important breakthroughs and patents, such as the PowerDI^® series of packaging technology to foster our growth in the semiconductor industry.

We acquired Anachip Corp., a fabless semiconductor company, in 2006, which initiated our presence in the analog product market with a portfolio of standard linear and low dropout regulator products, among others.

Through our acquisition of the assets of APD Semiconductor, Inc. in 2006, we acquired the SBR® patents and trademark. SBR® is a state-of-the-art integrated circuit wafer processing technology, which is able to integrate and improve the benefits of the two existing rectifier technologies into a single device. The creation of a finite conduction cellular IC, combined with inherent design uniformity, has allowed manufacturing costs to be kept competitive with the existing power device technology, and thus has produced a breakthrough in rectifier technology.

- 6 -

---

PowerDI and SBR are registered trademarks of Diodes Incorporated

In 2008, we acquired Zetex, which subsequently increased our available discrete and analog technologies with patents and trademarks for bipolar transistors and power management products such as LED drivers. LED drivers support a wide range of applications for automotive, safety and security, architecture, and portable lighting and are highly efficient and cost-effective.

In 2012, we acquired PAM, a provider of advanced analog and high-voltage power ICs. PAM’s product portfolio includes Class D audio amplifiers, DC-DC converters and LED backlighting drivers, which has strengthened our position as a global provider of high-quality and high-efficiency, space-saving analog products by expanding our product portfolio with innovative “filter-less” digital audio amplifiers, application-specific power management ICs, as well as high-performance LED drivers and DC-DC converters.

In 2013, we acquired BCD, a leading supplier of standard linear and power management devices. BCD has a product portfolio that includes AC/DC and DC/DC solutions for chargers and power adapters. BCD’s established presence in Asia, with a particularly strong local market position in China, offers us even greater participation in the consumer electronics, computing and communications end-markets.  

In 2015, we acquired Pericom. Pericom designs, develops and markets high-performance ICs and FCPs used in many of today’s advanced electronic systems. ICs include functions that support the connectivity, timing and signal conditioning of high-speed parallel and serial protocols that transfer data among a system’s microprocessor, memory and various peripherals, such as displays and monitors, and between interconnected systems. FCPs are electronic components that provide frequency references such as crystals and oscillators for computer, communication and consumer electronic products. Pericom’s analog, digital and mixed-signal ICs, together with our FCPs enable higher system bandwidth and signal quality, resulting in better operating reliability and signal integrity, and lower overall system cost in applications such as notebook computers, servers, network switches and routers, storage area networks, digital TVs, cell phones, GPS and digital media players.

Currently, our licensing of patents to other companies is not material. We do, however, license certain product technology from other companies, but we do not consider licensed technology royalties to be material. We believe the duration and other terms of the licenses are appropriate for our current needs. See “Risk Factors – We may be subject to claims of infringement of third-party intellectual property rights or demands that we license third-party technology, which could result in significant expense, reduction in our intellectual property rights and a negative impact on our business, operating results and financial condition.” in Part I, Item 1A of this Annual Report for additional information.

COMPETITION

Numerous semiconductor manufacturers and distributors serve the discrete, logic and analog semiconductor components market, making competition intense. Some of our larger competitors include Infineon Technologies A.G., Nexperia, formerly the Standard Products business of NXP Semiconductors N.V., ON Semiconductor Corporation, Rohm Electronics USA, LLC, Toshiba Corporation and Vishay Intertechnology, Inc., many of which have greater financial, marketing, distribution, brand name recognition, research and development, manufacturing and other resources. Accordingly, we from time to time may reposition product lines or decrease prices, which may affect our sales of, and profit margins on, such product lines. The price, features, availability and quality of the products, and our ability to design products and deliver customer service in keeping with the customers’ needs, determine the competitiveness of our products. We believe that our product focus, packaging expertise and our flexibility and ability to quickly adapt to customer needs affords us competitive advantages. See “Risk Factors – The semiconductor business is highly competitive, and increased competition may harm our business, operating results and financial condition.” in Part I, Item 1A of this Annual Report for additional information.

ENGINEERING AND RESEARCH AND DEVELOPMENT

Our engineering and research and development groups consist of applications, circuit design, and product development engineers who assist in determining the direction of our future product lines. One of their key functions is to work closely with market-leading customers to further refine, expand and improve our product portfolio within our target product types and packages. In addition, customer requirements and acceptance of new package types are assessed and new, higher-density and more energy-efficient packages are developed to satisfy customers’ needs.

Product development engineers work directly with our semiconductor circuit design and layout engineers to develop and design products that match our customers’ requirements. We have the capability to capture the customers’ electrical and packaging requirements and translate those requirements into product specifications which can then be designed and manufactured to support customers’ end-system applications.

- 7 -

---

For the years ended December 31, 2017, 2016 and 2015, our investment in research and development activities was approximately $77.9 million, $69.9 million and $57.0 million, respectively, or approximately 7% of net sales for each of the three years.

EMPLOYEES

As of December 31, 2017, we employed 8,586 employees (including approximately 926 temporary labor or independent contractors).  7,868 of our employees were in Asia, 249 were in the U.S. and 469 were in Europe. None of our employees in Asia or the U.S. are subject to a collective bargaining agreement, but a majority of our employees in Europe is covered by local labor agreements. We consider our relations with our employees to be satisfactory. See “Risk Factors – We may fail to attract or retain the qualified technical, sales, marketing, finance and management/executive personnel required to operate our business successfully, which could adversely affect our business, operating results and financial condition.” in Part I, Item 1A of this Annual Report for additional information.

ENVIRONMENTAL MATTERS

We are subject to a variety of U.S. federal, state, local and foreign governmental laws, rules and regulations related to the use, storage, handling, discharge or disposal of certain toxic, volatile or otherwise hazardous chemicals used in our manufacturing process in China and the U.K. where our wafer fabrication facilities are located, and in China, Taiwan and Germany where our assembly and test facilities are located. Any of these regulations could require us to acquire equipment or to incur substantial other costs to comply with environmental regulations or remediate problems. For the years ended December 31, 2017, 2016 and 2015, our capital expenditures for environmental controls have not been material. As of December 31, 2017, there were no known environmental claims or recorded liabilities. See “Risk Factors – We are subject to many environmental laws and regulations that could result in significant expenses and could adversely affect our business, operating results and financial condition.” in Part I, Item 1A of this Annual Report for additional information.

CERTAIN RELATIONSHIPS AND RELATED PARTY TRANSACTIONS

We conduct business with two related companies: Lite-On Semiconductor Corporation and its subsidiaries and affiliates (collectively, “LSC”), and Nuvoton Technology Corporation and its subsidiaries and affiliates (collectively, “Nuvoton”). LSC owned approximately 16% of our outstanding Common Stock as of December 31, 2017. We conduct business with a significant company, Keylink International (B.V.I.) Inc. and its subsidiaries and affiliates (collectively, “Keylink”).  Keylink is our 5% partner in our two Shanghai assembly and test facilities.  In addition, Ya Guang is our 2% partner in one of our Chengdu assembly and test facilities and our 5% partner in our other Chengdu assembly and test facility; however, we have no material transactions with Ya Guang.

Raymond Soong, the Chairman of the Board of Directors, is also the Chairman of LSC and the Chairman of Lite-On Technology Corporation (“LTC”), a significant shareholder of LSC. C.H. Chen, our former President and Chief Executive Officer and currently the Vice Chairman of the Board of Directors, is also Vice Chairman of LSC and a board member of LTC. Dr. Keh-Shew Lu, a member of our Board of Directors and our President and Chief Executive Officer, is also a board member of Nuvoton. In addition, L.P. Hsu, a former member of our Board of Directors, is also a consultant to LTC and a supervisor of the board of Nuvoton.

The Audit Committee of the Board of Directors reviews all related party transactions for potential conflict of interest situations on an ongoing basis. We believe that all related party transactions are on terms no less favorable to us than would be obtained from unaffiliated third parties. For more information concerning our relationships with LSC, Keylink and Nuvoton, see “Risk Factors – One of our external suppliers is also a related party. The loss of this supplier could harm our business, operating results and financial condition.” in Part I, Item 1A and Note 14 of “Notes to Consolidated Financial Statements” of this Annual Report for additional information.

SEASONALITY

Historically, our net sales have been affected by the cyclical nature of the semiconductor industry.   In addition, our net sales have been subject to some seasonal variation with weaker net sales in the first and fourth calendar quarters. See Note 20 (unaudited) of “Notes to Consolidated Financial Statements” of this Annual Report for additional information on our quarterly results.

AVAILABLE INFORMATION

Our website address is http://www.diodes.com. We make available, free of charge through our website, our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, proxy statements, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act as soon as reasonably practicable after such material is electronically filed with or furnished to the Securities and Exchange Commission (the “SEC”).

- 8 -

---

Our filings may also be read and copied at the SEC’s Public Reference Room at 100 F Street NE, Room 1580 Washington, D.C. 20549. Information on the operation of the Public Reference Room may be obtained by calling the SEC at 1-800-SEC-0330. The SEC also maintains a website (http://www.sec.gov) that contains reports, proxy and information statements, and other information regarding issuers that file with the SEC.

Our website also provides investors access to financial and corporate governance information including our corporate governance guidelines, Code of Business Conduct, whistleblower hotline, and press releases. The contents of our website are not incorporated by reference into this Annual Report on Form 10-K.

Cautionary Statement for Purposes of the “Safe Harbor” Provision of the Private Securities Litigation Reform Act of 1995

Many of the statements, included in this Annual Report on Form 10-K, contain forward-looking statements and information relating to our company. We generally identify forward-looking statements by the use of terminology such as “may,” “will,” “could,” “should,” “potential,” “continue,” “expect,” “intend,” “plan,” “estimate,” “anticipate,” “believe,” “project,” or similar phrases or the negatives of such terms. We base these statements on our beliefs as well as assumptions we made using information currently available to us. Such statements are subject to risks, uncertainties and assumptions, including those identified in “Risk Factors,” as well as other matters not yet known to us or not currently considered material by us. Should one or more of these risks or uncertainties materialize, or should underlying assumptions prove incorrect, actual results may vary materially from those anticipated, estimated or projected. Given these risks and uncertainties, prospective investors are cautioned not to place undue reliance on such forward-looking statements. Forward-looking statements do not guarantee future performance and should not be considered as statements of fact.

You should not unduly rely on these forward-looking statements, which speak only as of the date of this Annual Report on Form 10-K.  Unless required by law, we undertake no obligation to publicly update or revise any forward-looking statements to reflect new information or future events or otherwise. The Private Securities Litigation Reform Act of 1995 (the “Act”) provides certain “safe harbor” provisions for forward-looking statements. All forward-looking statements, made on this Annual Report on Form 10-K, are made pursuant to the Act.

 

Item 1A.  Risk Factors.

Investing in our Common Stock involves a high degree of risk. You should carefully consider the following risks and other information in this report before you decide to buy our Common Stock. Our business, financial condition or operating results may suffer if any of the following risks are realized. Additional risks and uncertainties not currently known to us may also adversely affect our business, financial condition or operating results. If any of these risks or uncertainties occurs, the trading price of our Common Stock could decline and you could lose part or all of your investment.

RISKS RELATED TO OUR BUSINESS

The success of our business depends on the strength of the global economy and the stability of the financial markets, and any weaknesses in these areas may have a material adverse effect on our net sales, operating results and financial condition.

Weaknesses in the global economy and financial markets can lead to lower consumer discretionary spending and demand for items that incorporate our products in the consumer electronics, computing, industrial, communications and the automotive sectors. A decline in end-user demand can affect our customers’ demand for our products, the ability of our customers to meet their payment obligations and the likelihood of customers canceling or deferring existing orders. Our net sales, operating results and financial condition could be negatively affected by such actions.

During times of difficult market conditions, our fixed costs combined with lower net sales and lower profit margins may have a negative impact on our business, operating results and financial condition.

The semiconductor industry is characterized by high fixed costs. Notwithstanding our utilization of third-party manufacturing capacity, most of our production requirements are met by our own manufacturing facilities. In difficult economic environments, we could be faced with a decline in the utilization rates of our manufacturing facilities due to decreases in product demand. During such periods, our manufacturing facilities do not operate at full capacity and the costs associated with this excess capacity are expensed immediately and not capitalized into inventory. When our utilization rates decline to abnormally low production levels, we generally experience lower gross margins. The market conditions in the future may adversely affect our utilization rates and consequently our future gross margins, and this, in turn, could have a material negative impact on our business, operating results and financial condition.

- 9 -

---

Downturns in the highly cyclical semiconductor industry or changes in end-market demand could adversely affect our operating results and financial condition.

The semiconductor industry is highly cyclical, and periodically experiences significant economic downturns characterized by diminished product demand, production overcapacity and excess inventory, which can result in rapid erosion in average selling prices. From time to time, the semiconductor industry experiences order cancellations and reduced demand for products, resulting in significant net sales declines, due to excess inventories at end-equipment manufacturers and general economic conditions, especially in the technology sector. The market for semiconductors may experience renewed, and possibly more severe and prolonged downturns, which may harm our operating results and financial condition.

In addition, we operate in a few narrow markets of the broader semiconductor market and, as a result, cyclical fluctuations may affect these segments to a greater extent than they affect the broader semiconductor market. This may cause us to experience greater fluctuations in our operating results and financial condition than compared to some of our broad line semiconductor competitors. In addition, we may experience significant changes in our profitability as a result of variations in sales, changes in product mix, changes in end-user markets and the costs associated with the introduction of new products. The markets for our products depend on continued demand in the consumer electronics, computing, communications, industrial and automotive sectors. These end-user markets also tend to be cyclical and may also experience changes in demand that could adversely affect our operating results and financial condition.

The semiconductor business is highly competitive, and increased competition may harm our business, operating results and financial condition.

The semiconductor industry in which we operate is highly competitive. We expect intensified competition from existing competitors and new entrants. Competition is based on price, product performance, product availability, quality, reliability, technological innovation and customer service. We compete in various markets with companies of various sizes, many of which are larger and have greater resources or capabilities as it relates to financial, marketing, distribution, brand name recognition, research and development, manufacturing and other resources than we have. As a result, they may be better able to develop new products, market their products, pursue acquisition candidates and withstand adverse economic or market conditions. Most of our current major competitors are broad line semiconductor manufacturers who often have a wider range of product types and technologies than we do. In addition, companies not currently in direct competition with us may introduce competing products in the future. Some of our current major competitors are Infineon Technologies A.G., Nexperia, formerly the Standard Products business of NXP Semiconductors N.V., ON Semiconductor Corporation, Rohm Electronics USA, LLC, Toshiba Corporation and Vishay Intertechnology, Inc. We may not be able to compete successfully in the future, and competitive pressures may harm our business, operating results and financial condition.

One of our external suppliers is also a related party. The loss of this supplier could harm our business, operating results and financial condition.

In 2017, 2016 and 2015, LSC, our largest stockholder, accounted for approximately 1%-3% of our silicon wafer supply and our finished goods supply. The loss of LSC as a supplier could materially harm our business, operating results and financial condition.

Delays in initiation of production at facilities due to implementing new production techniques or resolving problems associated with technical equipment malfunctions could adversely affect our manufacturing efficiencies, operating results and financial condition.

Our manufacturing efficiency has been and will be an important factor in our future profitability, and we may not be able to maintain or increase our manufacturing efficiency. Our manufacturing and testing processes are complex, require advanced and costly equipment and are continually being modified in our efforts to improve product performance and cost. Difficulties in the manufacturing process can lower yields. Technical or other problems could lead to production delays, order cancellations and lost net sales. In addition, any problems in achieving acceptable yields, construction delays, or other problems in upgrading or expanding existing facilities, building new facilities, bringing new manufacturing capacity to full production or changing our process technologies, could also result in capacity constraints, production delays and a loss of future net sales and customers. Our operating results also could be adversely affected by any increase in fixed costs and operating expenses related to increases in production capacity if net sales do not increase proportionately, or in the event of a decline in demand for our products.  Any disruption at any of our wafer fabrication facilities or assembly and test facilities could have a material adverse effect on our manufacturing efficiencies, operating results and financial condition.

We are and will continue to be under continuous pressure from our customers and competitors to reduce the price of our products, which could adversely affect our growth and profit margins.

Prices for our products tend to decrease over their life cycle. There is substantial and continuing pressure from customers to reduce the total cost of purchasing our products. To remain competitive and retain our customers and gain new ones, we must continue

- 10 -

---

to reduce our costs through product and manufacturing improvements. We must also strive to minimize our customers’ shipping and inventory financing costs and to meet their other goals for rationalization of supply and production. Our net sales growth and profit margins will suffer if we cannot effectively continue to reduce our costs and keep our product prices competitive.

Our customers require our products to undergo a lengthy and expensive qualification process without any assurance of product sales and may demand to audit our operations from time to time.  A failure to qualify a product or a negative audit finding could adversely affect our net sales, operating results and financial condition.

Prior to purchasing our products, our customers may require our products to undergo an extensive qualification process, which involves rigorous reliability testing. This qualification process may continue for six months or longer. However, qualification of a product by a customer does not ensure any sales of the product to that customer. In addition, we are focusing more on the automotive and industrial markets. These markets, automotive in particular, require higher quality standards.  Although we are working to ensure our organization and products meet the more rigorous quality standards, there can be no assurances we will succeed.  Even after successful qualification and sales of a product to a customer, a subsequent revision to the product, changes in the product’s manufacturing process or the selection of a new supplier by us may require a re-qualification process, which may result in delayed net sales and excess or obsolete inventory. After our products are qualified, it can take an additional six months or more before the customer commences volume production of components or devices that incorporate our products. Despite these uncertainties, we devote substantial resources, including design, engineering, sales, marketing and management efforts, toward qualifying our products with customers in anticipation of sales. If we are unsuccessful or delayed in qualifying any of our products with a customer, such failure or delay would preclude or delay sales of such product to the customer, which may adversely affect our net sales, operating results and financial condition.

In addition, from time to time, our customers may demand an audit of our records, product manufacturing, qualification, and packaging processes, business practices and other related items to verify that we have complied with our business obligations, standard processes and procedures, product specifications and certain governing laws and regulations related to our business practices, and in accordance with the agreed terms and conditions of mutual business agreements.  If the audit shows any deficiency in any of these categories, our customers may require us to implement extensive protocols to remedy the deficiency, assess us significant penalties, refuse shipments of our products, return existing inventory, cancel orders, or terminate our business relationship, each of which will adversely affect our net sales, operating results and financial condition.

Our customer orders are subject to cancellation or modification usually with no penalty. High volumes of order cancellation or reduction in quantities ordered could adversely affect our net sales, operating results and financial condition.

All of our customer orders are subject to cancellation or modification, usually with no penalty to the customer. Orders are generally made on a purchase order basis, rather than pursuant to long-term supply contracts, and are booked from immediate delivery to twelve months or more in advance of delivery. The rate of booking new orders can vary significantly from month to month. We, and the semiconductor industry as a whole, are experiencing a trend towards shorter customer-requested lead-times, which is the amount of time between the date a customer places an order and the date the customer requires shipment. Furthermore, our industry is subject to rapid changes in customer outlook and periods of excess inventory due to changes in demand in the end-markets our industry serves. As a result, many of our purchase orders are revised, and may be cancelled, with little or no penalty and with little or no notice. However, we must still commit production and other resources to fulfilling these purchase orders even though they may ultimately be cancelled. If a significant number of purchase orders are cancelled or product quantities ordered are reduced, and we are unable to timely generate replacement orders, we may build up excess inventory and our net sales, operating results and financial condition may suffer.

Production at our manufacturing facilities could be disrupted for a variety of reasons, including natural disasters and other extraordinary events, which could prevent us from producing enough of our products to maintain our sales and satisfy our customers’ demands and could adversely affect our operating results and financial condition.

A disruption in production at our manufacturing facilities could have a material adverse effect on our business. Disruptions could occur for many reasons, including fire, floods, hurricanes, typhoons, droughts, tsunamis, volcanoes, earthquakes, disease or other similar natural disasters, unplanned maintenance or other manufacturing problems, labor shortages, power outages or shortages, telecommunications failures, strikes, transportation interruption, government regulation, terrorism or other extraordinary events. Such disruptions may cause direct injury or damage to our employees and property and related internal controls with significant indirect consequences. Alternative facilities with sufficient capacity or capabilities may not be available, may cost substantially more or may take a significant time to start production, each of which could negatively affect our business and financial performance. If one of our key manufacturing facilities is unable to produce our products for an extended period of time, our sales may be reduced by the shortfall caused by the disruption, and we may not be able to meet our customers’ needs, which could cause them to seek other suppliers. Such disruptions could have an adverse effect on our operating results and financial condition.

- 11 -

---

New technologies could result in the development of new products by our competitors and a decrease in demand for our products, and we may not be able to develop new products to satisfy changes in demand, which would adversely affect our net sales, market share, operating results and financial condition.

Our product range and new product development program are focused on low pin count semiconductor devices with one or more active or passive components. Our failure to develop new technologies, or anticipate or react to changes in existing technologies, either within or outside of the semiconductor market, could materially delay development of new products, which could result in a decrease in our net sales and a loss of market share to our competitors. The semiconductor industry is characterized by rapidly changing technologies and industry standards, together with frequent new product introductions. This includes the development of new types of technology or the improvement of existing technologies, such as analog and digital technologies that compete with, or seek to replace, discrete semiconductor technology. Our financial performance depends on our ability to design, develop, manufacture, assemble, test, market and support new products and product enhancements on a timely and cost-effective basis. New products often command higher prices and, as a result, higher profit margins. We may not successfully identify new product opportunities or develop and bring new products to market or succeed in selling them into new customer applications in a timely and cost-effective manner.

Products or technologies developed by other companies may render our products or technologies obsolete or noncompetitive, and since we operate primarily in a narrower segment of the broader semiconductor industry, this may have a greater effect on us than it would if we were a broad-line semiconductor supplier with a wider range of product types and technologies. Many of our competitors are larger and more established international companies with greater engineering and research and development resources than us. Our failure to identify or capitalize on any fundamental shifts in technologies in our product markets, relative to our competitors, could harm our business, have a material adverse effect on our competitive position within our industry and harm our relationships with our customers. In addition, to remain competitive, we must continue to reduce package sizes, improve manufacturing costs and expand our sales. We may not be able to accomplish these goals, which would adversely affect our net sales, market share, operating results and financial condition.

We may be adversely affected by any disruption in our information technology systems, which could adversely affect our cash flows, operating results and financial condition.

Our operations are dependent upon our information technology systems, which encompass all of our major business functions. We rely upon such information technology systems to manage and replenish inventory, to fill and ship customer orders on a timely basis, to coordinate our sales activities across all of our products and services and to coordinate our administrative activities. A substantial disruption in our information technology systems for any prolonged time period (arising from, for example, system capacity limits from unexpected increases in our volume of business, outages or delays in our service) could result in delays in receiving inventory and supplies or filling customer orders and adversely affect our customer service and relationships. Our systems might be damaged or interrupted by natural or man-made events or by computer viruses, physical or electronic break-ins and similar disruptions affecting the global Internet. There can be no assurance that such delays, problems, or costs will not have a material adverse effect on our cash flows, operating results and financial condition.

As our operations grow in both size and scope, we will continuously need to improve and upgrade our systems and infrastructure while maintaining the reliability and integrity of our systems and infrastructure. The expansion of our systems and infrastructure will require us to commit substantial financial, operational and technical resources before the volume of our business increases, with no assurance that the volume of business will increase. In particular, we have upgraded our financial reporting system and are currently seeking to upgrade other information technology systems. These and any other upgrades to our systems and information technology, or new technology, now and in the future, will require that our management and resources be diverted from our core business to assist in compliance with those requirements. There can be no assurance that the time and resources our management will need to devote to these upgrades, service outages or delays due to the installation of any new or upgraded technology (and related customer issues), or the impact on the reliability of our data from any new or upgraded technology will not have a material adverse effect on our cash flows, operating results and financial condition.

A significant portion of our operations operate on a single Enterprise Resource Planning (“ERP”) platform. To manage our international operations efficiently and effectively, we rely heavily on our ERP system, internal electronic information and communications systems and on systems or support services from third parties. Any of these systems are subject to electrical or telecommunications outages, computer hacking or other general system failure. It is also possible that future acquisitions will operate on different ERP systems and that we could face difficulties in integrating operational and accounting functions of new acquisitions. Difficulties in upgrading or expanding our ERP system or system-wide or local failures that affect our information processing could adversely affect our cash flows, operating results and financial condition and could result in material weaknesses or significant deficiencies in internal controls.

- 12 -

---

We may be subject to claims of infringement of third-party intellectual property rights or demands that we license third-party technology, which could result in significant expense, reduction in our intellectual property rights and a negative impact on our business, operating results and financial condition.

The semiconductor industry is characterized by vigorous protection and pursuit of intellectual property rights. From time to time, third parties have asserted, and may in the future assert, patent, copyright, trademark and other intellectual property rights to technology that is important to our business and have demanded, and may in the future demand, that we license their patents and technology. Any litigation to determine the validity of allegations that our products infringe or may infringe these rights, including claims arising through our contractual indemnification of our customers, or claims challenging the validity of our patents, regardless of its merit or resolution, could be costly and divert the efforts and attention of our management and technical personnel. We may not prevail in litigation given the complex technical issues and inherent uncertainties in intellectual property litigation. If litigation results in an adverse ruling, we could be required to:

 

We depend on third-party suppliers for timely deliveries of raw materials, manufacturing services, product and process development, parts and equipment, as well as finished products from other manufacturers, and our reputation with customers, operating results and financial condition could be adversely affected if we are unable to obtain adequate supplies in a timely manner.

Our manufacturing operations depend upon obtaining adequate supplies of raw materials, manufacturing services, product and process development, parts and equipment on a timely basis from third parties. In some instances, a supplier may be our sole-source supplier.  Our operating results could be adversely affected if we are unable to obtain adequate supplies of raw materials, manufacturing services, product and process development, parts and equipment in a timely manner or if the costs charged to us were to increase significantly. Our business could also be adversely affected if there is a significant degradation in the quality of raw materials used in our products, or if the raw materials give rise to compatibility or performance issues in our products, any of which could lead to an increase in customer returns or product warranty claims. Although we maintain rigorous quality control systems, errors or defects may arise from a supplied raw material and be beyond our detection or control. In addition, we may be subject to quality claims from customers who purchased goods from companies before we acquired those companies.  Any interruption in, or change in quality of, the supply of raw materials, manufacturing services, product and process development, parts or equipment needed to manufacture our products could adversely affect our reputation with customers, operating results and financial condition.

In addition, we sell finished products from other manufacturers. Our business could also be adversely affected if there are quality problems with the finished products we sell. From time to time, various suppliers may extend lead-times, limit supplies or increase prices due to capacity constraints or other factors. We have no long-term purchase contracts with any of these manufacturers and, therefore, have no contractual assurances of continued supply, pricing or access to finished products that we sell, and any such manufacturer could discontinue supplying to us at any time. Additionally, some of our suppliers of finished products or wafers compete directly with us and may, in the future, choose not to supply products to us.

If we do not succeed in continuing to vertically integrate our business, we will not realize the cost and other efficiencies we anticipate, which could adversely affect our ability to compete, our operating results and financial condition.

We are continuing to vertically integrate our business. Key elements of this strategy include continuing to expand our sales organization, manufacturing capacity, wafer foundry and research and development capability and expand our marketing, product development, package development and assembly and test operations in company-owned facilities or through the acquisition of established contractors. There are certain risks associated with our vertical integration strategy, including:

 

- 13 -

---

The risks of becoming a fully integrated manufacturer are amplified in an industry-wide slowdown because of the fixed costs associated with manufacturing facilities. In addition, we may not realize the cost, operating and other efficiencies that we expect from continued vertical integration. If we fail to successfully vertically integrate our business, our ability to compete, profit margins, operating results and financial condition may suffer.

Part of our growth strategy involves identifying and acquiring companies. We may be unable to identify suitable acquisition candidates or consummate desired acquisitions and, if we do make any acquisitions, we may be unable to successfully integrate any acquired companies with our operations, which could adversely affect our business, operating results and financial condition.

A significant part of our growth strategy involves acquiring companies. For example, (i) in 2000, we acquired FabTech, Inc., a wafer fabrication company, in order to have our own wafer manufacturing capabilities, (ii) in 2006, we acquired Anachip Corp. as an entry into the analog market, (iii) in 2006, we acquired the net operating assets of APD Semiconductor, Inc., (iv) in 2008, we acquired Zetex plc., (v) in 2012, we acquired over 50% of the outstanding common stock of Eris Technology Corporation, (vi) also in 2012, we acquired Power Analog Microelectronics, Inc., (vii) in 2013, we acquired BCD Semiconductor Manufacturing Limited and (viii) in 2015, we acquired Pericom Semiconductor Corporation. In addition, from time to time, we may be in various stages of discussions with potential acquisition targets as we intend to continue to expand and diversify our operations by making further acquisitions. However, we may be unsuccessful in identifying suitable acquisition candidates, or we may be unable to consummate a desired acquisition. To the extent we do make acquisitions, if we are unsuccessful in integrating these companies or their operations or product lines with our operations, or if integration is more difficult than anticipated, we may experience disruptions that could have a material adverse effect on our business, operating results and financial condition. In addition, we may not realize all of the benefits we anticipate from any such acquisitions. Some of the risks that may affect our ability to integrate or realize any anticipated benefits from acquisitions that we may make include those associated with:

 

We are subject to litigation risks, including securities class action litigation, which may be costly to defend and the outcome of which is uncertain and could adversely affect our business and financial condition.

All industries, including the semiconductor industry, are subject to legal claims, with and without merit, including securities class action litigation that may be particularly costly and which may divert the attention of our management and our resources in general. We are involved in a variety of legal matters, most of which we consider either routine matters that arise in the normal course of business or immaterial for our aggregate business operations. These routine matters typically fall into broad categories such as those involving suppliers and customers, employment and labor, and intellectual property. We believe it is unlikely that the final outcome of these legal claims will have a material adverse effect on our financial position, operating results or cash flows. However, defense and settlement costs can be substantial, even with respect to claims that we believe have no merit. Due to the inherent uncertainty of the litigation process, the resolution of any particular legal claim or proceeding could adversely affect our business, operating results and financial condition.

From time to time, we have been, or may in the future be, involved in securities litigation or litigation arising from our acquisitions. We can provide no assurance as to the outcome of any such litigation matter in which we are a party. These types of matters are costly to defend and even if resolved in our favor, could have a material adverse effect on our business, financial condition, operating results and cash flow. Such litigation could also substantially divert the attention of our management and our resources in general. Uncertainties resulting from the initiation and continuation of securities or other litigation could harm our ability to obtain credit and financing for our operations and to compete in the marketplace. Because the price of our Common Stock has been,

- 14 -

---

and may continue to be, volatile, we can provide no assurance that securities litigation will not be filed against us in the future. In addition, we can provide no assurance that our past or future acquisitions will not subject us to additional litigation. See Part I, Item 3 “Legal Proceedings” of this Annual Report for more information on our legal proceedings.

We are subject to many environmental laws and regulations that could result in significant expenses and could adversely affect our business, operating results and financial condition.

We are subject to a variety of U.S. federal, state, local and foreign governmental laws, rules and regulations related to the use, storage, handling, discharge or disposal of certain toxic, volatile or otherwise hazardous chemicals used in manufacturing our products throughout the world. Some of these regulations in the U.S. include the Federal Clean Water Act, Clean Air Act, Resource Conservation and Recovery Act, Comprehensive Environmental Response, Compensation, and Liability Act and similar state statutes and regulations. Any of these regulations could require us to acquire equipment or to incur substantial other expenses to comply with environmental regulations. If we were to incur such additional expenses, our product costs could significantly increase, materially affecting our business, financial condition and operating results. Any failure to comply with present or future environmental laws, rules and regulations could result in fines, suspension of production or cessation of operations, any of which could have a material adverse effect on our business, operating results and financial condition. Our operations affected by such requirements include, among others: the disposal of wastewater containing residues from our manufacturing operations through publicly operated treatment works or sewer systems, and which may be subject to volume and chemical discharge limits and may also require discharge permits; and the use, storage and disposal of materials that may be classified as toxic or hazardous. Any of these may result in, or may have resulted in, environmental conditions for which we could be liable.

Some environmental laws impose liability, sometimes without fault, for investigating or cleaning up contamination on, or emanating from, our currently or formerly owned, leased or operated properties, as well as for damages to property or natural resources and for personal injury arising out of such contamination. Such liability may also be joint and several, meaning that we could be held responsible for more than our share of the liability involved, or even the entire liability. In addition, the presence of environmental contamination could also interfere with ongoing operations or adversely affect our ability to sell or lease our properties. Environmental requirements may also limit our ability to identify suitable sites for new or expanded plants. Discovery of contamination for which we are responsible, the enactment of new laws and regulations, or changes in how existing requirements are enforced, could require us to incur additional costs for compliance or subject us to unexpected financial liabilities.

Our products, or products we purchase from third parties for resale, may be found to be defective and, as a result, warranty claims and product liability claims may be asserted against us and we may not have recourse against our suppliers, which may harm our business, reputation with our customers, operating results and financial condition.

Our products, or products we purchase from third parties for resale, are typically sold at prices that are an insignificant portion of the overall value of the equipment or other goods in which they are incorporated. For example, our products that are incorporated into a television may be sold for several cents, whereas the television maker might sell the television for several hundred dollars. Although we maintain rigorous quality control systems, we receive warranty claims and product liability claims for some of these products that are defective, or that do not perform to published specifications. Since a defect or failure in our products could give rise to failures in the end-products that incorporate them (and consequential claims for damages against our customers from their customers), we may face claims for damages that are disproportionate to the net sales and profits we receive from the products involved. In addition, our ability to reduce such liabilities may be limited by the laws or the customary business practices of the countries where we do business. Even in cases where we do not believe we have legal liability for such claims, we may choose to pay for them to retain a customer’s business or goodwill or to settle claims to avoid protracted litigation. Our operating results and business could be adversely affected as a result of a significant quality or performance issue in our products, if we are required or choose to pay for the damages that result. We may choose not to carry liability insurance, may not have sufficient insurance coverage, or may not have sufficient resources, to satisfy all possible warranty claims and product liability claims. In addition, any perception that our products are defective would likely result in reduced sales of our products, loss of customers and harm to our business, reputation, operating results and financial condition.

We may fail to attract or retain the qualified technical, sales, marketing, finance and management/executive personnel required to operate our business successfully, which could adversely affect our business, operating results and financial condition.

Our future success depends, in part, upon our ability to attract and retain highly qualified technical, sales, marketing, finance and managerial personnel. Personnel with the necessary expertise are scarce and competition for personnel with these skills is intense. We may not be able to retain existing key technical, sales, marketing, finance and managerial employees or be successful in attracting, assimilating or retaining other highly qualified technical, sales, marketing, finance and managerial/executive personnel in the future. For example, we have faced, and continue to face, intense competition for qualified technical and other personnel in China, where our assembly and test facilities are located. A number of U.S. and multi-national corporations, both in the semiconductor industry and in other industries, have recently established and are continuing to establish factories and plants in China, and the competition for qualified personnel has increased significantly as a result. If we are unable to retain existing key employees or are unsuccessful in

- 15 -

---

attracting new highly qualified employees, our business, operating results and financial condition could be materially and adversely affected.

We may not be able to achieve future growth, and any such growth may place a strain on our management and on our systems and resources, which could adversely affect our business, operating results and financial condition.

Our ability to successfully grow our business requires effective planning and management. Our past growth, and our targeted future growth, may place a significant strain on our management and on our systems and resources, including our financial and managerial controls, reporting systems and procedures. In addition, we will need to continue to train and manage our workforce worldwide. If we are unable to effectively plan and manage our growth effectively, our business and prospects will be harmed and we will not be able to maintain our profitable growth, which could adversely affect our business, operating results and financial condition.

Obsolete inventories as a result of changes in demand for our products and change in life cycles of our products could adversely affect our business, operating results and financial condition.

The life cycles of some of our products depend heavily upon the life cycles of the end-products into which our products are designed. End-market products with short life cycles require us to manage closely our production and inventory levels. Inventory may also become obsolete because of adverse changes in end-market demand. We may in the future be adversely affected by obsolete or excess inventories, which may result from unanticipated changes in the estimated total demand for our products or the estimated life cycles of the end-products into which our products are designed. In addition, some customers restrict how far back the date of manufacture for our products can be and certain customers may stop ordering products from us and go out of business due to adverse economic conditions; therefore, some of our product inventory may become obsolete and, thus, adversely affect our business, operating results and financial condition.

If OEMs do not design our products into their applications, our net sales may be adversely affected.

We expect an increasingly significant portion of net sales will come from products we design specifically for our customers. However, we may be unable to achieve these design wins. In addition, a design win from a customer does not guarantee future sales to that customer. Without design wins from OEMs, we would only be able to sell our products to these OEMs as a second source, which usually means we are only able to sell a limited amount of product to them. Once an OEM designs another supplier’s semiconductors into one of its product platforms, it is more difficult for us to achieve future design wins with that OEM’s product platform because changing suppliers involves significant cost, time, effort and risk to an OEM. Achieving a design win with a customer does not ensure that we will receive significant net sales from that customer, and we may be unable to convert design wins into actual sales. Even after a design win, the customer is not obligated to purchase our products and can choose at any time to stop using our products, if, for example, its own products are not commercially successful or if the customer can obtain a superior product or the product at a lower cost from one of our competitors.

We are subject to interest rate risk that could have an adverse effect on our cost of working capital and interest expenses, which could adversely affect our business, operating results and financial condition.

We currently have a U.S. banking credit facility under which as of December 31, 2017 we had a remaining principal balance of $165.8 million under a term loan, and had drawn $103.0 million on a $250.0 million revolver ($147.0 million of which remained available as of December 31, 2017), with the possibility of an additional $200.0 million of borrowings.  See “Liquidity and Capital Resources” below and Note 7 of “Notes to Consolidated Financial Statements” of this Annual Report for additional information. A rise in interest rates could have an adverse impact upon our cost of working capital and our interest expense. Based on our debt balances at December, 31, 2017, an increase or decrease in interest rates by 1.0% for the year on our credit facilities would increase or decrease our annual interest rate expense by less than $1.0 million, net of the amounts realized from our interest rate swaps.  

Our hedging strategies may not be successful in mitigating our risks associated with interest rates or foreign exchange exposure or our counterparties might not perform as agreed.

We use interest rate swaps and foreign exchange forward contracts to provide a level of protection against interest rate risks and foreign exchange exposure, but no hedging strategy can protect us completely. The nature and timing of hedging transactions influence the effectiveness of these strategies. Poorly designed strategies, improperly executed and documented transactions or inaccurate assumptions could actually increase our risks and losses. In addition, hedging strategies involve transaction and other costs. The hedging strategies and the derivatives that we use may not be able to adequately offset the risks of interest rate volatility and our hedging transactions may result in or magnify losses. Furthermore, interest rate and foreign exchange derivatives may not be available on favorable terms or at all, particularly during economic downturns. Any of the foregoing risks could adversely affect our business, financial condition and results of operations.  We are exposed to counterparty credit risk in the event of non-performance by counterparties to the interest rate swaps and foreign exchange contracts.

- 16 -

---

We may have a significant amount of debt with various financial institutions worldwide. Any indebtedness could adversely affect our business, operating results, financial condition and our ability to meet payment obligations under such debt.

 

We may have a significant amount of debt and substantial debt service requirements on our borrowings, including our credit facilities with various financial institutions worldwide. As of December 31, 2017 $268.8 million was outstanding under our U.S. banking credit facility. In addition, we have short-term foreign credit facilities with borrowing capacities of approximately $80.5 million with an unused amount of $78.7 million.

A significant amount of debt could have significant consequences on our future operations, including:

Any of the above-listed factors could have an adverse effect on our business, operating results, financial condition and our ability to meet our payment obligations under our debt.

Restrictions in our credit facilities may limit our business and financial activities, including our ability to obtain additional capital in the future.

Our U.S. banking credit facility contains covenants imposing various restrictions on our business and financial activities. These restrictions may affect our ability to operate our business and undertake certain financial activities and may limit our ability to take advantage of potential business or financial opportunities as they arise. The restrictions these covenants place on us include limitations on our ability to incur liens, incur indebtedness, make investments, dissolve or merge or consolidate with or into another entity, dispose of certain property, make restricted payments (including dividends and share repurchases), issue or sell equity interests, engage in other different material lines of business, conduct related party transactions, enter into certain burdensome contractual obligations and use proceeds from any credit facility to purchase or carry margin stock or to extend credit to others for the same purpose. Our U.S. banking credit facility also requires us to meet certain financial ratios, including a minimum consolidated fixed charge coverage ratio and a maximum consolidated leverage ratio.

Our ability to comply with the U.S. banking credit facility may be affected by events beyond our control, including prevailing economic, financial and industry conditions, and are subject to the risks stated in this section of the Annual Report. The breach of any of these covenants or restrictions could result in an event of default under the facility. An event of default under the facility would permit the lenders under the facility to declare all amounts owed under such facility to be immediately due and payable in full. Upon acceleration of our indebtedness, we may be unable to repay the accelerated amount of principal and interest on the credit facilities that would then be due. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Financial Condition-Debt instruments” in Part II, Item 7 of this Annual Report for additional information.

Our business benefits from certain Chinese government incentives. Expiration of, or changes to, these incentives could adversely affect our operating results and financial condition.

The Chinese government has provided various incentives to technology companies, including our manufacturing facilities located in Shanghai and Chengdu, China, in order to encourage development of the high-tech industry. These incentives include reduced tax rates and other measures. As a result, we are entitled to a preferential enterprise income tax rate of 15% so long as our manufacturing facilities continue to maintain their High and New Technology Enterprise (“HNTE”) status. One of our Shanghai manufacturing facilities has been approved for HNTE status for the tax years 2015-2017. In addition, one of our wafer fabrication facilities and one research and development facility located in Shanghai were approved for HNTE status for the tax years 2017-2019. HNTE qualification requires, but is not limited to, metrics based on China research and development expenditures as well as research and development headcount and overall college-degreed headcount.  Any prior years that have already been approved are subject to audit requirements. If we were to no longer meet the HNTE requirements, our statutory tax rate for our approved Shanghai assembly

- 17 -

---

and test facility and wafer fabrication facility would increase to 25% for any period in which an audit shows we were not compliant, which could adversely affect our operating results and financial condition.

In connection with our entity in Chengdu, China, we have qualified for tax incentives offered in the Go West Initiative (“Go West”), where companies are entitled to a preferential income tax rate of 15% for doing business in western China. If we were to no longer meet the Go West requirements, our statutory tax rate for this entity would increase to 25%, which could adversely affect our operating results and financial condition.

The impact of our HNTE and Go West status, collectively called tax holidays, decreased our tax expense by approximately $3.7 million, $7.3 million and $2.9 million for the years ended December 31, 2017, 2016 and 2015, respectively. The benefit of the tax holidays on basic and diluted earnings per share for the twelve months ended December 31, 2017 was approximately $0.08. The benefit of the tax holidays on both basic and diluted earnings per share for both twelve month periods ended December 31, 2016 and 2015 was approximately $0.15 and $0.06, respectively.

We operate a global business through numerous foreign subsidiaries, and there is a risk that tax authorities will challenge our transfer pricing methodologies or legal entity structures, which could adversely affect our operating results and financial condition.

We conduct operations worldwide through our foreign subsidiaries and are, therefore, subject to complex transfer pricing regulations in the jurisdictions in which we operate. Transfer pricing regulations generally require that, for tax purposes, transactions between related parties be priced on a basis that would be comparable to an arm’s length transaction between unrelated parties. There is uncertainty and inherent subjectivity in complying with these rules. To the extent that any foreign tax authorities disagree with our transfer pricing policies, we could become subject to significant tax liabilities and penalties. Based on our current knowledge and probability assessment of potential outcomes, we believe that we have provided for all tax exposures. However, the ultimate outcome of a tax examination could differ materially from our provisions and could have a material adverse effect on our business, financial condition, operating results and cash flows.

Our legal organizational structure could result in unanticipated unfavorable tax or other consequences which could have a material adverse effect on our financial condition and operational results. In some countries, we maintain multiple entities for tax or other purposes. Changes in tax laws, regulations, future jurisdictional profitability of us and our subsidiaries, and related regulatory interpretations in the countries in which we operate may impact the taxes we pay or tax provision we record, which could have a material adverse effect on our operating results. In addition, any challenges to how our entities are structured or realigned or their business purpose by taxing authorities could result in us becoming subject to significant tax liabilities and penalties which could have a material adverse effect on our business, financial condition, operating results and cash flows.

The value of our benefit plan assets and liabilities is based on estimates and assumptions, which may prove inaccurate and the actual amount of expenses recorded in the consolidated financial statements could differ materially from the assumptions used.

Certain of our employees in the U.K. participate in a company-sponsored defined benefit plan, which is closed to new entrants and is frozen with respect to future benefit accruals. The retirement benefit is based on the final average compensation and service of each eligible employee. In accounting for these plans, we are required to make actuarial assumptions that are used to calculate the earning value of the related assets, where applicable, and liabilities and the amount of expenses to be recorded in our consolidated financial statements. Assumptions include, but are not limited to, the expected return on plan assets, discount rates, and mortality rates. While we believe the underlying assumptions under the projected unit credit method are appropriate, the carrying value of the related assets and liabilities and the actual amount of expenses recorded in the consolidated financial statements could differ materially from the assumptions used.

Changes in actuarial assumptions for our defined benefit plan could increase the volatility of the plan’s asset value, require us to increase cash contributions to the plan and have a negative impact on our cash flows, operating results and financial condition.

The assets of our defined benefit pension plan (the “plan”) in the U.K. provide pensions to employees and former employees.  The plan’s assets are invested in a diverse range of listed and unlisted securities, including corporate bonds and, mutual funds and are determined, from time to time, based on their fair market value.  The plan’s obligation to pay pensions is estimated by using actuarial assumptions. To the extent that the plan’s assets are not sufficient to meet the estimated amount of the plan’s obligations, further funding of the plan will be required by the plan’s sponsoring employers, Diodes Zetex Limited and Diodes Zetex Semiconductors Limited, over an agreed upon deficit recovery period.

As of December 31, 2017, the benefit obligation of the plan was approximately $166.1 million and the total assets in such plan were approximately $134.2 million. Therefore, the plan was underfunded by approximately $31.8 million. The difference between plan obligations and assets, or the funded status of the plan, is a significant factor in determining the net periodic benefit costs of the plan and the ongoing funding requirements of the plan.

- 18 -

---

Any fluctuations in the U.K. equity markets and bond markets or changes in several key actuarial assumptions, including, but not limited to, changes in discount rate, estimated return on the plan and mortality rates, can (i) affect the level of plan funding, (ii) cause volatility in the net periodic pension cost, and (iii) increase our future funding requirements. In the event that actual results differ from the actuarial assumptions or actuarial assumptions are changed, the funding status of the plan may change. Any deficiency in the funding of the plan could result in additional charges to equity and an increase in future plan expense and cash contribution. A significant increase in our funding requirements could have a negative impact on our cash flows, operating results and financial condition.

 

         During the first quarter of 2015, we agreed to a payment plan with the trustees of the defined benefit plan, under which we would make annual contributions each year through 2030, of approximately 2 million British Pounds (“GBP”) (approximately $2.8 million based on a GBP:USD exchange rate of 1.4).  The annual contributions were expected to meet the deficit disclosed in the plan as of April 5, 2013, by December 31, 2030.  The trustees are required to review the funding position every three years, and a further review was carried out as of April 5, 2016. The outcome of the review, as agreed to with the trustees during the first quarter of 2017, was that contributions would continue at the existing level, up to December 31, 2029.  If we fail to reach an agreement with the trustees, as we are required to do every three years, the Pension Regulator in the U.K. could impose contributions on Diodes Zetex Limited or Diodes Zetex Semiconductors Limited, or in limited circumstances could require financial support to be provided to the plan from entities connected or associated with Diodes Zetex Limited or Diodes Zetex Semiconductors Limited. Furthermore, Diodes Zetex Limited and Diodes Zetex Semiconductors Limited remain ultimately liable to fully fund the plan regardless of any failure to agree upon future contributions in respect of a particular actuarial valuation, i.e., if either the plan or those companies were wound up, a debt equal to each company’s share of the entire outstanding deficit at that time (calculated on a statutory conservative basis) would be owed by the relevant company. This could have a material adverse effect on our cash flows, operating results and financial condition.  

Certain of our customers and suppliers require us to comply with their codes of conduct, which may include certain restrictions that may substantially increase our cost of doing business as well as have an adverse effect on our operating efficiencies, operating results and financial condition.

Certain of our customers and suppliers require us to agree to comply with the Electronic Industry Code of Conduct (“EICC”) or their own codes of conduct, which may include detailed provisions on labor, human rights, health and safety, environment, corporate ethics and management systems. Certain of these provisions are not requirements under the laws of the countries in which we operate and may be burdensome to comply with on a regular basis. Moreover, new provisions may be added or material changes may be made to any these codes of conduct, and we may have to promptly implement such new provisions or changes, which may substantially further increase the cost of our business, be burdensome to implement and adversely affect our operational efficiencies and operating results. If we violate any such codes of conduct, we may lose further business with the customer or supplier and, in addition, we may be subject to fines from the customer or supplier. While we believe that we are currently in compliance with our customers and suppliers’ codes of conduct, there can be no assurance that, from time to time, if any one of our customers and suppliers audits our compliance with such code of conduct, we would be found to be in full compliance. A loss of business from these customers or suppliers could have a material adverse effect on our business, operating results and financial condition.

Compliance with government regulations and customer demands regarding the use of “conflict minerals” may result in increased costs and may have a negative impact on our business, operating results and financial condition.

The Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010 imposes new disclosure requirements regarding the use of certain minerals, which are mined from the Democratic Republic of Congo and adjoining countries, known as conflict minerals. When these new requirements are fully implemented, they could affect the pricing, sourcing and availability of minerals used in the manufacture of semiconductor devices (including our products). We are incurring additional costs associated with complying with the disclosure requirements, such as costs related to determining the source of any conflict minerals used in our products. Our supply chain is complex, and we may be unable to verify the origins for all metals used in our products. Customers may demand that the products they purchase be free of conflict minerals. Therefore, we may encounter challenges with our customers and stockholders if we are unable to certify that our products are conflict free. This requirement could affect the sourcing and availability of products we purchase from suppliers. This may reduce the number of suppliers that may be able to provide conflict-free products, and may affect our ability to obtain products in sufficient quantities to meet customer demand or at competitive prices.

There are risks associated with previous and future acquisitions. We may ultimately not be successful in overcoming these risks or any other problems encountered in connection with acquisitions.

The risks commonly encountered in acquisitions of companies include, among other things, higher than anticipated acquisition costs and expenses, the difficulty and expense in integrating the operations and personnel of the companies, the difficulty of bringing standards, procedures and controls, including disclosure controls and procedures and internal control over financial reporting, into conformance with our operations, the ability to coordinate our new products and process development, the ability to hire additional management and other critical personnel, the ability to increase the scope, geographic diversity and complexity of our operations,

- 19 -

---

difficulties in consolidating facilities and transferring processes and know-how, difficulties in reducing costs, prolonged diversion of our management’s attention from the management of our business, the ability to clearly define our present and future strategies, the loss of key employees and customers as a result of changes in management and any geographic distances may make integration slower and more challenging. We may ultimately not be successful in overcoming these risks or any other problems encountered in connection with acquisitions.

In addition, any acquisition may cause large one-time expenses as well as create goodwill and other intangible assets that may result in significant asset impairment charges in the future.

If we fail to maintain an effective system of internal controls or discover material weaknesses in our internal control over financial reporting, we may not be able to report our financial results accurately or detect fraud, which could harm our business and the trading price of our Common Stock.

Effective internal controls are necessary for us to produce reliable financial reports and are important in our effort to prevent financial fraud. We are required to periodically evaluate the effectiveness of the design and operation of our internal controls. These evaluations may result in the conclusion that enhancements, modifications or changes to our internal controls are necessary or desirable. While management evaluates the effectiveness of our internal controls on a regular basis, these controls may not always be effective. There are inherent limitations on the effectiveness of internal controls, including collusion, management override, and failure of human judgment. Because of this, control procedures are designed to reduce rather than eliminate business risks. If we fail to maintain an effective system of internal controls or if management or our independent registered public accounting firm were to discover material weaknesses in our internal controls, we may be unable to produce reliable financial reports or prevent fraud, which could harm our financial condition and operating results, and could result in a loss of investor confidence and a decline in our stock price.

Terrorist attacks, or threats or occurrences of other terrorist activities, whether in the U.S. or internationally, may affect the markets in which our Common Stock trades, the markets in which we operate and our operating results and financial condition.

Terrorist attacks, or threats or occurrences of other terrorist or related activities, whether in the U.S. or internationally, may affect the markets in which our Common Stock trades, the markets in which we operate and our profitability. Future terrorist or related activities could affect our domestic and international sales, disrupt our supply chains and impair our ability to produce and deliver our products. Such activities could affect our physical facilities or those of our suppliers or customers. Such terrorist attacks could cause seaports or airports, to or through which we ship, to be shut down, thereby preventing the delivery of raw materials and finished goods to or from our manufacturing facilities in China, Taiwan and Germany and our wafer fabrication facilities in China, the U.S. and the U.K., or to our regional sales offices. Due to the broad and uncertain effects that terrorist attacks have had on financial and economic markets generally, we cannot provide any estimate of how these activities might negatively affect our future operating results and financial condition.

System security risks, data protection breaches, cyber-attacks and other related cybersecurity issues could disrupt our internal operations, and any such disruption could reduce our expected net sales, increase our expenses, damage our reputation and adversely affect our stock price.

Experienced computer programmers and hackers may be able to penetrate our security controls and misappropriate or compromise our confidential information or that of third parties, create system disruptions or cause shutdowns. Computer programmers and hackers also may be able to develop and deploy viruses, worms and other malicious software programs that attack our websites, products or otherwise exploit any security vulnerabilities of our websites and products. In 2016 the Company became aware of a cyber-intrusion.  In response to this cyber-intrusion we engaged an information technology security expert to assess the information accessed by the intruder and to assist in designing security measures to prevent a recurrence.  We completed the assessment and have started enhancing our security measures. These efforts continue. At this time we have no reason to believe the cyber intruder obtained any confidential or propriety information. The costs to us to eliminate or alleviate cyber or other security problems, bugs, viruses, worms, malicious software programs and security vulnerabilities could be significant, and our efforts to address these problems may not be successful and could result in interruptions, delays, cessation of service, extortionate demands to decrypt files and loss of existing or potential customers that may impede our sales, manufacturing, distribution or other critical functions and materially adversely affect our operating results, stock price and reputation.

We manage and store various proprietary information and sensitive or confidential data relating to our business and third party business. Breaches of our security measures or the accidental loss, inadvertent disclosure or unapproved dissemination of proprietary information or sensitive or confidential data about us or our partners or customers, including the potential loss, encryption or disclosure of such information or data as a result of fraud, trickery or other forms of deception, could expose us, our partners and customers or the individuals affected to a risk of loss or misuse of this information, extortionate demands to decrypt files, result in litigation and potential liability for us, damage our brand and reputation or otherwise harm our business. In addition, the cost and operational consequences of implementing further data protection measures could be significant. Delayed sales, significant costs or

- 20 -

---

lost customers resulting from these system security risks, data protection breaches, cyber-attacks and other related cyber-security issues could materially adversely affect our operating results, stock price and reputation.

RISKS RELATED TO OUR INTERNATIONAL OPERATIONS

Our international operations subject us to risks that could adversely affect our operations.

We expect net sales from foreign markets to continue to represent a significant portion of our total net sales. In addition, the majority of our manufacturing facilities are located in China. In each of the years ended 2017, 2016 and 2015, our Asian and European subsidiaries represented approximately 90% of our net sales. There are risks inherent in doing business internationally, and any or all of the following factors could cause harm to our business:

 

We have significant operations and assets in China, the U.K., Germany, Hong Kong and Taiwan and, as a result, will be subject to risks inherent in doing business in those jurisdictions, which may adversely affect our financial performance and operating results.

We have a significant portion of our assets in mainland China, U.K., Germany, Hong Kong and Taiwan. Our ability to operate in these countries may be adversely affected by changes in those jurisdictions’ laws and regulations, including those relating to taxation, including, but not limited to income tax and value added tax, import and export tariffs, environmental regulations, land use rights, property and other matters. In addition, our operating results and financial performance are subject to the economic and political situations. We believe that our operations are in compliance with all applicable legal and regulatory requirements. However, the central or local governments of these jurisdictions may impose new, stricter regulations or interpretations of existing regulations that would require additional expenditures and efforts on our part to ensure our compliance with such regulations or interpretations.

Changes in the political environment or government policies in those jurisdictions could result in revisions to laws or regulations or their interpretation and enforcement, increased taxation, restrictions on imports, import duties or currency revaluations. In addition, a significant destabilization of relations between or among China, the U.K., Germany, Hong Kong, Taiwan and the U.S. could result in restrictions or prohibitions on our operations or the sale of our products or the forfeiture of our assets in these jurisdictions. There can be no certainty as to the application of the laws and regulations of these jurisdictions in particular instances. Enforcement of existing laws or agreements may be sporadic and implementation and interpretation of laws inconsistent. Moreover, there is a high degree of fragmentation among regulatory authorities, resulting in uncertainties as to which authorities have jurisdiction over particular parties or transactions. The possibility of political conflict between these countries or with the U.S. could have an adverse impact upon our ability to transact business in these jurisdictions and to generate profits.

 

Significant uncertainties related to changes in governmental policies and participation in international trading partnerships or economic unions currently exist, and, depending upon how such uncertainties are resolved, the changes could have a material adverse effect on us.

Changes to existing trade agreements, such as the North American Free Trade Agreement, greater restrictions on international trade generally and significant increases in tariffs on goods imported into the United States, particularly from China, could materially adversely affect our business and operations. Changes in U.S. social, political, regulatory and economic conditions or in laws and policies governing foreign trade, manufacturing, development and investment in the territories and countries where we currently develop, manufacture and sell products, and any negative reactions towards the United States as a result of such changes, could adversely affect our business and operations. In addition, negative sentiments towards the U.S. among non-U.S. customers and among non-U.S. employees or prospective employees could adversely affect our international sales or the hiring and retention of qualified employees, respectively.

- 21 -

---

The United Kingdom referendum to exit the European Union has also created political and economic uncertainty, particularly in the U.K. and the European Union, and this uncertainty may last for years. Our business in the U.K. the European Union, and worldwide could be adversely affected during this period of uncertainty, and, depending upon developments following completion of the U.K. exit, may materially adversely affect our business and operations. Future events as a consequence of the U.K. exit, including stresses within the U.K. itself, may cause significant volatility in global financial markets, including global currency and debt markets, and result in a slowdown in economic activity in the U.K., Europe or globally, which could materially adversely affect our operating results and growth prospects. In addition, our business and operations could be materially adversely affected by new or revised trade agreements between countries in which we have operations or do business, including the U.S., the U.K., the European Union and China, as well as by the possible impositions of tariffs or trade or other regulatory barriers by any nation where we have operations or do business.

A slowdown in the Chinese economy could limit the growth in demand for electronic devices containing our products, which would have a material adverse effect on our business, operating results and prospects.

We believe that an increase in demand in China for electronic devices that include our products will be an important factor in our future growth. Continuing weakness in the Chinese economy could result in a decrease in demand for electronic devices containing our products and, thereby, materially and adversely affect our business, operating results and prospects.

Economic regulation in China could materially and adversely affect our business, operating results and prospects.

We have a significant portion of our manufacturing capacity in mainland China. In addition, in 2017 approximately 56% of our total sales were shipped to customers in China. In recent years, the Chinese economy has experienced periods of rapid expansion and wide fluctuations in the rate of inflation. In response to these factors, the Chinese government has, from time to time, adopted measures to regulate growth and contain inflation, including measures designed to restrict credit or control prices. Such actions in the future could increase the cost of doing business in China or decrease the demand for our products in China and, thereby, have a material adverse effect on our business, operating results and prospects.

We could be adversely affected by violations of the United States’ Foreign Corrupt Practices Act, the U.K.’s Bribery Act 2010, China’s anti-corruption campaign and similar worldwide anti-bribery laws.

The United States’ Foreign Corrupt Practices Act (“FCPA”), the United Kingdom’s Bribery Act 2010 (the “U.K. Bribery Act”), China’s anti-corruption campaign and similar anti-bribery laws in other jurisdictions generally prohibit companies and their intermediaries from making improper payments to government officials for the purpose of obtaining or retaining business. Our policies mandate compliance with these anti-bribery laws. We operate in many parts of the world that may have experienced governmental corruption to some degree and, in certain circumstances, strict compliance with anti-bribery laws may conflict with local customs and practices. We train our staff concerning FCPA, the U.K. Bribery Act and related anti-bribery laws. We have established procedures and controls to monitor internal and external compliance. There can be no assurance that our internal controls and procedures always will protect us from reckless or criminal acts committed by our employees or agents, and we have no third party attestation to the effectiveness of our internal controls related to fraud and corruption. If we are found to be liable for FCPA, the U.K. Bribery Act and other anti-bribery law violations (either due to our own acts or inadvertence, or due to the acts or inadvertence of others), we could incur criminal or civil penalties or other sanctions, which could have a material adverse effect on our business and operating results.

We are subject to foreign currency risk as a result of our international operations.

We face exposure to adverse movements in foreign currency exchange rates, principally the Chinese Yuan, the Taiwanese dollar, the Euro and the British Pound Sterling and, to a lesser extent, the Japanese Yen and the Hong Kong dollar. Our income and expenses are based on a mix of currencies and a decline in one currency relative to the other currencies could adversely affect our operating results. Furthermore, our operating results are reported in U.S. dollars, which is our reporting currency. In the event the U.S. dollar weakens against a foreign currency, we will experience a currency transaction loss, which could adversely affect our operating results. Also, fluctuations in foreign currency exchange rates may have an adverse impact and be increasingly influential to our overall sales, profits and operating results as amounts that are measured in foreign currency are translated back to U.S. dollars for reporting purposes. Our foreign currency risk may change over time as the level of activity in foreign markets grows and could have an adverse impact upon our financial results, especially if the portion of our sales attributable to Europe increases. We have taken, and plan to continue to take, efforts to mitigate some of our foreign currency exposure by entering into foreign exchange hedging agreements with financial institutions to reduce exposures to some of the principal currencies in countries in which we conduct sales, acquire raw materials, build products and make capital investments, but these efforts may not be successful. In this regard, these hedging agreements do not cover all currencies in which we do business, do not eliminate foreign currency risk entirely for the currencies that they do cover, and involve costs and risks of their own in the form of transaction costs, credit requirements and counterparty risk.

- 22 -

---

China is experiencing rapid social, political and economic change, which has increased labor costs and other related costs that could make doing business in China less advantageous than in prior years. Increased labor costs in China could adversely affect our business, operating results and financial condition.

Historically, labor in China has been readily available at a lower cost compared to other countries. However, because China is experiencing rapid social, political and economic change, there can be no assurance that labor will continue to be available in China at costs consistent with historical levels. Any future increase in labor cost in China is likely to be higher than historical and projected amounts and may occur multiple times in any given year. As a result of experiencing such rapid social, political and economic change, China is also likely to enact new, and/or revise its existing, labor laws and regulations on employee compensation and benefits. These changes in Chinese labor laws and regulations will likely to have an adverse effect on product manufacturing costs in China. Furthermore, if China workers go on strike to demand higher wages, our operations could be disrupted. Many of our suppliers are currently dealing with labor shortages in China, which may result in future supply delays and disruptions and may drive a substantial increase in their labor costs that is likely to be shared by us in the form of price increases to us. New or revised government labor laws or regulations, strikes or labor shortages could cause our product costs to rise and/or could cause manufacturing partners on whom we rely to exit the business. These events could have a material adverse impact on our product availability and quality, which would affect our business, operating results and financial condition.

We may not continue to receive preferential tax treatment in Asia, thereby increasing our income tax expense and reducing our net income.

As an incentive for establishing our manufacturing subsidiaries in China, we receive preferential tax treatment. Governmental changes in foreign tax law may cause us not to be able to continue receiving these preferential tax treatments in the future, which may cause an increase in our income tax expense, thereby reducing our net income.

The distribution of any earnings of certain foreign subsidiaries may be subject to foreign income taxes, thus reducing our net income.

As a result of enactment of the Tax Cuts and Jobs Act (the “Tax Act”) on December 22, 2017, all of our undistributed foreign subsidiary earnings immediately became subject to U.S. income tax.  We had not previously accrued U.S. taxes on these earnings, due to our policy of indefinitely reinvesting the earnings overseas.  Refer to the U.S. Tax Reform section in Item 7 and the Tax Cuts and Jobs Act (the “Tax Act”) section in Note 11 of “Notes to Consolidated Financial Statements” of this Annual Report for further discussion.  Our undistributed foreign earnings continue to be indefinitely reinvested in foreign operations, with limited exceptions related to earnings of European subsidiaries.  Any future distributions of foreign earnings will not be subject to additional U.S. income tax, but may be subject to foreign withholding taxes. As of December 31, 2017, we had undistributed earnings from non-U.S. operations of approximately $770 million (including approximately $51 million of restricted earnings, which are not available for dividends). Undistributed earnings of our China subsidiaries comprise $429 million of this total.  Additional Chinese withholding taxes of approximately $42 million would be required should the $429 million of such earnings be distributed out of China as dividends. We continue to evaluate the potential effects the Tax Act may have on our long term plans for capital investment across the geographies in which we operate.  In accordance with SEC Staff Accounting Bulletin No. 118, the Company will finalize the accounting for the effects of the Tax Act no later than the fourth quarter of 2018.  Future adjustments made to the provisional effects will be reported as a component of income tax expense from continuing operations in the reporting period in which any such adjustments are determined.

RISKS RELATED TO OUR COMMON STOCK

Variations in our quarterly operating results may cause our stock price to be volatile.

We have experienced substantial variations in net sales, gross profit margin and operating results from quarter to quarter. We believe that the factors that influence this variability of quarterly results include:

 

- 23 -

---

Accordingly, a comparison of our operating results from period to period is not necessarily meaningful to investors and our operating results for any period do not necessarily indicate future performance. Variations in our quarterly results may trigger volatile changes in our stock price.

General or industry specific market conditions or stock market performance or domestic or international macroeconomic and geopolitical factors unrelated to our performance also may affect the price of our stock. For these reasons, investors should not rely on recent or historical trends to predict future stock prices, financial condition, operating results or cash flows. In addition, as discussed in Part I, Item 3 “Legal Proceedings” of this Annual Report, we are involved in several lawsuits. Additional volatility in the price of our securities could result in the filing of additional litigation, which could result in substantial costs and the diversion of management time and resources.

We may enter into future acquisitions and take certain actions in connection with such acquisitions that could adversely affect the price of our Common Stock.

As part of our growth strategy, we expect to review acquisition prospects that would implement our vertical integration strategy or offer other growth opportunities. From time to time, we may be in various stages of discussions and we may acquire businesses, products or technologies in the future. In the event of future acquisitions, we could:

 

 

Such actions by us could harm our operating results and adversely affect the price of our Common Stock.

Our directors, executive officers and significant stockholders hold a substantial portion of our Common Stock, which may lead to conflicts with other stockholders over corporate transactions and other corporate matters.

Our directors, executive officers and our affiliate, LSC, beneficially own approximately 23% of our outstanding Common Stock, including options to purchase shares of our Common Stock that are exercisable within 60 days of December 31, 2017. These stockholders, acting together, will be able to influence significantly all matters requiring stockholder approval, including the election of directors and significant corporate transactions such as mergers or other business combinations. This control may delay, deter or prevent a third party from acquiring or merging with us, which could adversely affect the market price of our Common Stock.

LSC, our largest stockholder, owns approximately 16% (approximately 7.8 million shares) of our Common Stock. Some of our directors and executive officers may have potential conflicts of interest because of their positions with LSC or their ownership of LSC common stock.

Raymond Soong, the Chairman of the Board of Directors, is the Chairman of LSC, and is the Chairman of Lite-On Technology Corporation (“LTC”), a significant shareholder of LSC. C.H. Chen, our former President and Chief Executive Officer and currently the Vice Chairman of the Board of Directors, is also Vice Chairman of LSC and a board member of LTC. Dr. Keh-Shew Lu, a member of our Board of Directors and our President and Chief Executive Officer, is a board member of LTC and a board member of Nuvoton. L.P. Hsu, a former member of the Board of Directors since 2007, serves as a consultant to LTC and a supervisor of the board of Nuvoton. Several of our directors and executive officers may own LSC common stock or hold options to purchase LSC common stock. Service on our Board of Directors and as a director or officer of LSC, or ownership of LSC common stock by our directors and executive officers, could create, or appear to create, actual or potential conflicts of interest when directors and officers are faced with decisions that could have different implications for LSC and us. For example, potential conflicts could arise in connection with decisions involving the Common Stock owned by LSC, or under the other agreements we may enter into with LSC. In 2017, 2016 and 2015, LSC accounted for approximately between 1% and 3% of our silicon wafer supply and our finished good supply. We may have difficulty resolving any potential conflicts of interest with LSC, and even if we do, the resolution may be less favorable than if we were dealing with an unrelated third party.

- 24 -

---

We were formed in 1959, and our early corporate records are incomplete. As a result, we may have difficulty in assessing and defending against claims relating to rights to our Common Stock purporting to arise during periods for which our records are incomplete.

We were formed in 1959 under the laws of California and reincorporated in Delaware in 1968. We have had several transfer agents since being formed. In addition, our early corporate records, including our stock ledger, are incomplete. As a result, we may have difficulty in assessing and defending against claims relating to rights to our Common Stock purporting to arise during periods for which our records are incomplete.

Non-cash tender offers, debt equity swaps or equity exchanges to consummate our business activities are likely to have the effect of diluting the ownership interest of existing stockholders, including qualified stockholders who receive shares of our Common Stock in such business activities.

We, from time to time, may utilize non-cash tender offers, debt equity swaps or equity exchanges in accordance with the guidance and rules promulgated by the SEC to consummate our business activities. Such means to consummate our business activities will likely involve issuance of our Common Stock in large quantities and will subsequently dilute the ownership interest of existing stockholders, including stockholders who previously received shares of our Common Stock in such transactions. Any sales in the public market of the newly issued Common Stock could adversely affect prevailing market prices of our Common Stock. In addition, utilizing non-cash tender offers, debt equity swaps or equity exchanges may encourage short selling because such utilization could depress the price of our Common Stock.

Anti-takeover effects of certain provisions of Delaware law and our Certificate of Incorporation and Bylaws, may hinder a take-over attempt.

Some provisions of Delaware law, our certificate of incorporation and bylaws may be deemed to have an anti-takeover effect and may delay or prevent a tender offer or takeover attempt, including those attempts that might result in a premium over the market price for the shares held by stockholders.

Section 203 of Delaware General Corporation Law may deter a take-over attempt.

Section 203 of the Delaware General Corporation Law prohibits transactions between a Delaware corporation and an “interested stockholder,” which is defined as a person who, together with any affiliates or associates, beneficially owns, directly or indirectly, 15.0% or more of the outstanding voting shares of a Delaware corporation. This provision prohibits certain business combinations between an interested stockholder and a Delaware corporation for a period of three years after the date the stockholder becomes an interested stockholder, unless:

For this purpose, business combinations include mergers, consolidations, sales or other dispositions of assets having an aggregate value in excess of 10.0% of the aggregate market value of the consolidated assets or outstanding stock of the corporation, and certain transactions that would increase the interested stockholder’s proportionate share ownership in the corporation.

Certificate of Incorporation and Bylaw Provisions may deter a take-over attempt.

Provisions of our certificate of incorporation and bylaws may have the effect of making it more difficult for a third party to acquire control of us. In particular, our certificate of incorporation authorizes our Board of Directors to issue, without further action by the stockholders, up to 1,000,000 shares of preferred stock with rights and preferences, including voting rights, designated from time to time by the Board of Directors. The existence of authorized but unissued shares of preferred stock enables our Board of Directors to render it more difficult or to discourage an attempt to obtain control of us by means of a merger, tender offer, proxy contest or otherwise.

 

 

- 25 -

---

Item 1B.  Unresolved Staff Comments.

None

 

 

Item 2.Properties.

Our corporate headquarters are located in Plano, Texas.  As of December 31, 2017, we own approximately 3.7 million square feet of property and lease approximately 3.1 million square feet of property, with leases expiring at various times beginning in 2018 with land rights expiring in 2056.  The table below sets forth the use, location and square footage of property either owned or leased by the Company:  

 

 

We believe our current facilities are adequate for the foreseeable future.

 

Item 3. Legal Proceedings.

From time to time, we are involved in various legal proceedings that arise in the normal course of business. While we intend to defend any lawsuit vigorously, we presently believe that the ultimate outcome of any current pending legal proceeding will not have any material adverse effect on our financial position, cash flows or operating results. However, litigation is subject to inherent uncertainties, and unfavorable rulings could occur. An unfavorable ruling could include monetary damages, which could impact our business and operating results for the period in which the ruling occurs or future periods. See Note 16 of the “Notes to Consolidated Financial Statements” for detailed information regarding the status of our lawsuits.

 

 

Item 4.Mine Safety Disclosures.

Not Applicable.

 

 

 

- 26 -

---

PART II

Market Information

Our Common Stock is traded on the Nasdaq Global Select Market (“NasdaqGS”) under the symbol “DIOD.” The following table shows the range of high and low closing sales prices per share for our Common Stock for each fiscal quarter from January 1, 2016 as reported by NasdaqGS.

 

Holders and Recent Stock Price

On February 9, 2018, the closing sales price of our Common Stock as reported by NasdaqGS was $29.22 and there were approximately 273 holders of record of our Common Stock.

Dividends

We have never declared or paid dividends on our Common Stock, and currently do not intend to pay dividends in the foreseeable future as we intend to retain any earnings for future use in our business.  Our U.S. banking credit facility permits us to pay dividends up to $3.0 million per fiscal year to our stockholders so long as we have not defaulted at the time of such dividend and no default would result from declaring and paying such dividend. The payment of dividends is within the discretion of our Board of Directors, and will depend upon, among other things, our earnings, financial condition, capital requirements, and general business conditions.

Securities Authorized for Issuance Under Equity Compensation Plans

The information regarding our equity compensation plans required to be disclosed by Item 201(d) of Regulation S-K is incorporated by reference from our 2018 definitive proxy statement into Item 12 of Part III of this Annual Report.

- 27 -

---

Performance Graph

The following graph compares the yearly percentage change in the cumulative total stockholder return of our Common Stock against the cumulative total return of the Nasdaq Composite and the Nasdaq Industrial Index for the five calendar years ending December 31, 2017. The graph is not necessarily indicative of future price performance.

The graph shall not be deemed incorporated by reference by any general statement incorporating by reference this Annual Report into any filing under the Securities Act of 1933 or under the Securities Exchange Act of 1934, except to the extent that the Company specifically incorporates this information by reference, and shall not otherwise be deemed filed under such Acts.

 

 

 

Source: Prepared by Zacks Investment Research, Inc. Used with permission. All rights reserved. Copyright 1980-2016.

The graph assumes $100 invested on December 31, 2012 in our Common Stock, the stock of the companies in the Nasdaq Composite Index and the stock of companies in the Nasdaq Industrial Index, and that all dividends received within a quarter, if any, were reinvested in that quarter.

 

 

 

- 28 -

---

Issuer Purchases of Equity Securities

The Company repurchases shares of its Common Stock from time to time pursuant to publicly announced share repurchase programs. During December 2017, the Company repurchased 300,000 shares of its common shares at a cost of $8.7 million. All purchases were made through open market transactions and were recorded as treasury stock. The following table contains information for shares repurchased during the fourth quarter of 2017. None of the shares in this table were repurchased directly from any of our officers or directors.

 

      

 

 

 

 

 

 

 

 

 

 

 

 

 

- 29 -

---

The following selected consolidated financial data for the fiscal years ended December 31, 2017 through 2013 is qualified in its entirety by, and should be read in conjunction with, the other information and consolidated financial statements, including the notes thereto, appearing elsewhere herein. Certain immaterial amounts as presented in the accompanying consolidated financial statements have been reclassified to conform to 2017 financial statement presentation.

 

 

 

 

The following section discusses management’s view of the financial condition, results of operations and cash flows of Diodes Incorporated and its subsidiaries (collectively, “the Company,” “our Company,” “we,” “our,” “ours,” or “us”) and should be read together with the consolidated financial statements and the notes to consolidated financial statements included elsewhere in this Form 10-K.

The following discussion contains forward-looking statements and information relating to our Company. We generally identify forward-looking statements by the use of terminology such as “may,” “will,” “could,” “should,” “potential,” “continue,” “expect,” “intend,” “plan,” “estimate,” “anticipate,” “believe,” “project,” or similar phrases or the negatives of such terms. We base these statements on our beliefs as well as assumptions we made using information currently available to us. Such statements are subject to risks, uncertainties and assumptions, including those identified in Part I, Item 1A.“Risk Factors,” as well as other matters not yet known to us or not currently considered material by us. Should one or more of these risks or uncertainties materialize, or should underlying assumptions prove incorrect, actual results may vary materially from those anticipated, estimated or projected. Given these risks and uncertainties, prospective investors are cautioned not to place undue reliance on such forward-looking statements. Forward-looking statements do not guarantee future performance and should not be considered as statements of fact.

- 30 -

---

You should not unduly rely on these forward-looking statements, which speak only as of the date of this Annual Report on Form 10-K. Unless required by law, we undertake no obligation to publicly update or revise any forward-looking statements to reflect new information or future events or otherwise. The Private Securities Litigation Reform Act of 1995 (the “Act”) provides certain “safe harbor” provisions for forward-looking statements. All forward-looking statements made in this Annual Report on Form 10-K are made pursuant to the Act.

Summary of the Twelve Months Ended December 31, 2017

Summary of the Twelve Months Ended December 31, 2016

KFAB Shutdown

During 2017 we completed the shutdown of KFAB. The Company ceased production operations at KFAB late in third quarter 2017 and vacated the premises during November 2017. Employees were provided retention and standard severance packages.  Total costs incurred for the shutdown were approximately $10.1 million.

Business Outlook

During 2017 we achieved our goal of $1 billion in annual revenue.  During 2017, we announced new goals for 2025 that include revenue of $2.5 billion and gross margin of 40%, representing gross profit of $1.0 billion. Acquisitions remain a key part of our growth strategy to reach our revenue goal. We have a solid pipeline of designs and expanded customer relationships across all regions and product lines. The success of our business depends on, among other factors, the strength of the global economy and the stability of the financial markets, our customers’ demand for our products, the ability of our customers to meet their payment obligations, the likelihood of customers not canceling or deferring existing orders, and the strength of consumers’ demand for items containing our

- 31 -

---

products in the end-markets we serve. We believe the long-term outlook for our business remains generally favorable despite the uncertainties in the global economy as we continue to execute on the strategy that has proven successful for us over the years. See “Risk Factors – The success of our business depends on the strength of the global economy and the stability of the financial markets, and any weaknesses in these areas may have a material adverse effect on our net sales, operating results and financial condition.” in Part I, Item 1A of this Annual Report for additional information.

Factors Relevant to Our Results of Operations

In 2017, the following factors affected, and, we believe, will continue to affect, our results of operations:

Description of Sales and Expenses

Net sales

The principal factors that have affected or could affect our net sales from period to period are:

 

Cost of goods sold

Cost of goods sold includes manufacturing costs for our semiconductors and our wafers. These costs include raw materials used in our manufacturing processes as well as labor costs and overhead expenses. Cost of goods sold is also impacted by yield improvements, capacity utilization and manufacturing efficiencies. In addition, cost of goods sold includes the cost of products that we purchase from other manufacturers and sell to our customers. Cost of goods sold is also affected by inventory obsolescence if our inventory management is not efficient.

Selling, general and administrative

Selling, general and administrative expenses relate primarily to compensation and associated expenses for personnel in general management, sales and marketing, information technology, engineering, human resources, procurement, planning and finance, and sales commissions, as well as outside legal, investor relations, accounting, consulting and other operating expenses.  Also included in selling, general and administrative expenses are acquisition costs from business combinations.

Research and development

Research and development expenses consist of compensation and associated costs of employees engaged in research and development projects, as well as materials and equipment used for these projects. Research and development expenses are primarily

- 32 -

---

associated with our wafer facilities in China, Lee’s Summit, Missouri and Oldham, U.K. and our manufacturing facilities in Taiwan and China, as well as with our engineers in the U.S. and Taiwan. All research and development expenses are expensed as incurred.

Amortization of acquisition-related intangible assets

Amortization of acquisition-related intangible assets consists of assets such as developed technologies and customer relationships.

Impairment of fixed assets

Impairment of fixed assets consists of the impairment amount recognized as a result of the fair value of an asset being below its recorded value.

Restructuring

Restructuring are one-time charges that must be paid by the Company due to reorganizing or restructuring a part of the business.

Interest income / expense

Interest income consists of interest earned on our cash and investment balances. Interest expense consists of interest payable on our outstanding credit facilities and other debt instruments.

Gain (loss) on securities carried at fair value

From time to time we may hold investments in the form of common stock or some other similar equivalent and have elected fair value accounting treatment.

Foreign currency (loss) gain, net

This income account is used to show the amount gained or lost as a result of foreign currency transactions.

Income tax provision

Our global presence requires us to pay income taxes in a number of jurisdictions. See Note 11 of “Notes to Consolidated Financial Statements” for additional information.

Net income attributable to noncontrolling interest

This represents the minority investors’ share of our subsidiaries’ earnings.

Net income attributable to common stockholders

Net income attributable to common stockholders is net income less net income attributable to noncontrolling interest.

 

U.S. Tax Reform

 

The Tax Cuts and Jobs Act (the “Tax Act”) was enacted on December 22, 2017. The Tax Act reduces the U.S. federal corporate tax rate from 35% to 21%, requires companies to pay a one-time transition tax on earnings of certain foreign subsidiaries that were previously tax deferred, provides an exemption from U.S. federal tax for dividends received from foreign subsidiaries, and creates new taxes on certain foreign sourced earnings. As of the completion of these financial statements and related disclosures, we have not completed our accounting for the tax effects of the Tax Act; however, as described below, we have made a reasonable estimate of such effects and recorded a provisional tax expense of approximately $45.9 million, which is included as a component of income tax expense from continuing operations in the fourth quarter of 2017.  This provisional tax expense incorporates assumptions made based upon the Company’s current interpretation of the Tax Act, and may change as we receive additional clarification and implementation guidance and as the interpretation of the Tax Act evolves. In accordance with SEC Staff Accounting Bulletin No. 118, the Company will finalize the accounting for the effects of the Tax Act no later than the fourth quarter of 2018.  Future adjustments made to the provisional effects will be reported as a component of income tax expense from continuing operations in the reporting period in which any such adjustments are determined.

 

The table below reflects the significant components of the provisional amount of tax expense recorded in the fourth quarter of 2017 and included as a component of income tax expense from continuing operations:

- 33 -

---

The Company expects to use net operating loss carryforwards and tax credits to completely offset any cash tax obligations resulting from the transition tax.  The other components shown above represent noncash adjustments to tax expense.  

Remeasurement of U.S. deferred tax assets and liabilities

We remeasured certain U.S. deferred tax assets and liabilities using the lower corporate income tax rate of 21%. However, we are still analyzing certain aspects of the Tax Act and refining our calculations, which could potentially affect the measurement of these deferred tax balances.

Transition tax on foreign earnings

The one-time transition tax is based on our total post-1986 earnings and profits (“E&P”) that we previously deferred from U.S. income taxes, and is net of indirect effects of unrecognized tax benefits. We have not yet completed our analysis of the total post-1986 E&P for the majority of our foreign subsidiaries. Further, the transition tax is based in part on the amount of those earnings held in cash and other specified assets. This amount may change when we finalize the calculation of post-1986 foreign E&P previously deferred from U.S. federal taxation and finalize the amounts held in cash or other specified assets.

No additional income taxes have been provided for any remaining undistributed foreign earnings not subject to the transition tax, or any additional outside basis difference inherent in these entities.  Our undistributed foreign earnings, including those subject to the transition tax, continue to be indefinitely reinvested in foreign operations, with limited exceptions related to earnings of European subsidiaries. Determining the amount of unrecognized deferred tax liability related to any remaining undistributed foreign earnings not subject to the transition tax and additional outside basis difference in these entities (i.e., basis difference in excess of that subject to the one-time transition tax) is not practicable.  We continue to evaluate the potential effects the Tax Act may have on our long-term plans for capital investment across the geographies in which we operate.

Foreign tax credits used to offset transition tax

The Company is able to claim foreign tax credits against the incremental U.S. tax due on its previously deferred foreign earnings.  However, we have not yet completed our calculation of the total amount of foreign taxes previously paid or accrued by the majority of our foreign subsidiaries that may be creditable against the transition tax.  We expect these tax credits to generally be available to offset any cash tax liability resulting from the transition tax.  

Other adjustments

 

We have not yet completed our analysis of the direct and indirect implications of the Tax Act on the Company’s tax attributes, such as tax credit carryforwards.  Included in the provisional tax expense is the estimated effect of our change in judgment regarding realizability of foreign tax credits and R&D credits.  

- 34 -

---

Results of Operations

The following table sets forth, for the periods indicated, the percentage that certain items in the statements of income bear to net sales:

 

The following discussion explains in greater detail our consolidated operating results and financial condition. This discussion should be read in conjunction with the consolidated financial statements and notes thereto appearing elsewhere in this Annual Report (in thousands).

2017 Compared to 2016

- 35 -

---

Net Sales

Net sales increased for the twelve months ended December 31, 2017, compared to the same period last year due to continued market share gains and strength across all our geographies, growth in our automotive, industrial and communications end markets as well as growth from our Pericom products.

Cost of Goods Sold

Cost of goods sold increased approximately $42.2 million for the twelve months ended December 31, 2017 compared to the same period last year.  Cost of goods primarily increased as a result of our increased sales.  A portion of the increase in cost of goods sold was $2.7 million of KFAB inventory that was expensed, as it will not be used in the future, and other inventory that was scrapped. Cost of goods was positively impacted in 2017 by receipt of $3.9 million of business interruption insurance and $0.6 million of inventory insurance recovery received related to the fire at KFAB.  As a percent of sales, cost of goods sold was 66.2% for the twelve months ended December 31, 2017 compared to 69.5% for the same period last year. Average unit cost decreased 7% for the twelve months ended December 31, 2017, compared to the same period last year, due to increased production facility utilization. For the twelve months ended December 31, 2017, gross profit increased approximately 24.3% when compared to the same period last year. Gross profit margin for the twelve month periods ended December 31, 2017 and 2016 was 33.8% and 30.5%, respectively.

Operating expenses

Operating expenses for the twelve months ended December 31, 2017 increased approximately $27.5 million, or 11.1%, compared to the same period last year.  Selling, general and administrative expenses (“SG&A”) increased approximately $9.4 million.  The increase in SG&A was driven by an increase in wages and benefits, partially offset by decreases in other SG&A expense categories. Research and development expenses (“R&D”) increased approximately $7.9 million, tracking with the increase in sales.  Amortization of acquisition- related intangibles decreased approximately $1.7 million reflecting the overall reduction in the balance of intangible assets subject to amortization.  During the twelve months ended December 31, 2017, we recognized impairment of fixed assets of $2.2 million, primarily related to the KFAB shutdown, and also recognized restructuring costs of $10.1 million related to the KFAB shutdown.  SG&A, as a percentage of sales, was 15.9% and 16.8% for the twelve months ended December 31, 2017 and 2016, respectively. R&D, as a percentage of sales, was constant at 7.4% for the twelve months ended December 31, 2017 and 2016.

 

Other (expense)/income

Interest income increased for the twelve months ended December 31, 2017 due to a higher amount of invested funds.  The increase in interest expense for the twelve months ended December 31, 2017 is due to higher interest rates on the borrowing to effect the Pericom acquisition. Foreign currency losses increased during the twelve months ended December 31, 2017 due to the weakness of the U.S. dollar when compared to the currencies in the foreign countries in which we operate.  These losses were partially offset by $1.5 million in hedging gains.

- 36 -

---

 Income tax provision

We recognized an income tax expense of approximately $62.3 million for the twelve months ended December 31, 2017 and income tax expense of approximately $6.6 million for the twelve months ended December 31, 2016, resulting in effective income tax rates of 99.6% and 26.2%, respectively. The increase in income taxes for 2017 compared to 2016 is primarily attributable the impact of the Tax Act.  The Tax Act increased our tax expense by approximately $45.9 million.  The remainder of the increase in our tax expense is primarily due to the increase in pretax earnings from 2016 to 2017.

2016 Compared to 2015

In 2016, we had twelve months of Pericom results included in our results of operations, compared to approximately one month of Pericom results included in our 2015 results of operations.

Net Sales

Net sales increased for the twelve months ended December 31, 2016, compared to the same period last year due to an incremental Pericom contribution of approximately $110.6 million.  This increase was partially offset by the impact of the fire at KFAB and weaker consumer market and weaker domestic demand in China.

Cost of Goods Sold

Cost of goods sold increased approximately $54.9 million for the twelve months ended December 31, 2016, compared to the same period last year. The increase in cost of goods sold was driven by cost of goods sold from Pericom of $69.3 million for the twelve months ended December 31, 2016 compared to Pericom cost of goods sold of $10.7 million in 2015.  The increase in cost of goods sold related to Pericom was partially offset by the impact of the KFAB fire resulting in lower costs and the related business interruption insurance recovery. As a percent of sales, cost of goods sold was 69.5% and 70.7% for the twelve months ended December 31, 2016 and 2015, respectively. Excluding Pericom, average unit cost decreased 1.4% for the twelve months ended December 31, 2016, compared to the same period last year. Including Pericom, average unit cost increased 6.6% for the twelve months ended December 31, 2016, compared to the same period last year. For the twelve months ended December 31, 2016, gross profit increased approximately 15.4% when compared to the same period last year. Gross profit margin for the twelve months ended December 31, 2016 and 2015 was 30.5% and 29.3%, respectively.

Operating expenses

Operating expenses for the twelve months ended December 31, 2016 increased approximately $42.4 million, or 20.5%, compared to the same period last year.  The increase in operating expense reflects approximately $56.7 million of incremental operating expenses from Pericom.  SG&A increased approximately $19.0 million due primarily to an increase of $26.5 million of incremental Pericom SG&A recognized in 2016 partially offset by lower stock compensation and change in control expense.   R&D

- 37 -

---

increased approximately $12.9 million due to an increase in Pericom R&D expense of $18.0 million recognized in 2016.  The increase in R&D expense of $12.9 million was partially offset by reversals of previously recorded liability reserves resulting from prior acquisitions. Amortization of acquisition- related intangibles increased approximately $11.9 million reflecting the amortization of the intangible assets acquired in the Pericom acquisition. SG&A, as a percentage of sales, was 16.8% and 16.4% for the twelve months ended December 31, 2016 and 2015, respectively. R&D, as a percentage of sales, was 7.4% and 6.7% for the twelve months ended December 31, 2016 and 2015, respectively.

 

Other (expense)/income

Interest income increased for the twelve months ended December 31, 2016 due to a higher amount of invested funds, reflecting the investments acquired in the Pericom acquisition.  The increase in interest expense for the twelve months ended December 31, 2016 was due to higher levels of borrowing to effect the Pericom acquisition. During 2016 we recognized the impairment of a cost-basis equity investment of $3.2 million.  During 2015, we recognized losses on the sale of marketable securities that was not repeated in 2016.  

 Income tax provision

We recognized an income tax expense of approximately $6.6 million for the twelve months ended December 31, 2016 and income tax expense of approximately $14.1 million for the twelve months ended December 31, 2015, resulting in effective income tax rates of 26.2% and 34.7%, respectively. The decrease in income taxes for 2016 compared to 2015 was primarily attributable to changes in the proportion of income generated in North America, Europe and Asia, respectively.

Financial Condition

Liquidity and Capital Resources

Our primary sources of liquidity are cash and cash equivalents, funds from operations and, if necessary, borrowings under our credit facilities. We currently have a U.S. banking credit facility (the “U.S. Credit Facility”) under which we may draw up to $250 million on a revolving basis, in addition to a $250 million term loan included in the U.S. Credit Facility.  The U.S. Credit Facility matures October 26, 2021.  The term loan portion of the U.S. Credit Facility is repayable in part through quarterly installments that increase over time from $3.1 million per quarter in 2016 to $9.4 million per quarter in the final year of the U.S. Credit Facility. We may from time to time request increases in the aggregate commitments under the U.S. Credit Facility of up to $200 million, subject to the lenders electing to increase their commitments or by means of the addition of new lenders, and subject to at least half of each increase in aggregate commitments being in the form of term loans, with the remaining amount of each increase being an increase in the amount of the revolving portion of the U.S. Credit Facility.  The U.S. Credit Facility bears interest at LIBOR or similar indices plus a specified margin.  The U.S. Credit Facility contains certain financial and non-financial covenants, including, but not limited to, a maximum consolidated leverage ratio, a minimum consolidated fixed charge coverage ratio, and restrictions on liens, indebtedness, investments, fundamental changes, dispositions, and restricted payments (including dividends and share repurchases).  At December 31, 2017, we owed $268.8 million under the U.S. Credit Facility, $103.0 million of which was drawn under the revolving portion and $165.8 million of which was outstanding under the term loan.

 

Our Asia subsidiaries maintain credit facilities with several financial institutions worldwide totaling $80.5 million. In some cases, our foreign credit lines are unsecured, uncommitted and may be repayable on demand.  These credit facilities bear interest at LIBOR plus a specified margin with interest payments due quarterly. In addition, we have short-term foreign credit facilities with borrowing capacities of approximately $80.5 million with an unused amount of $78.7 million.

Our primary liquidity requirements have been to meet our capital expenditure needs and to fund on-going operations. For 2017, 2016, and 2015, our working capital was $415.2 million, $547.4 million, and $570.9 million, respectively.  In 2017, our working capital decreased due to the use of cash and short-term investments to pay down our long-term debt.  In 2016 our working capital decreased due to decreases in short-term investments and a decrease in inventories. We expect cash generated by our operations together with existing cash, cash equivalents, short-term investments and available credit facilities to be sufficient to satisfy our working capital needs, capital asset purchases, outstanding commitments and other liquidity requirements associated with our existing operations for at least the next 12 months.

In 2017, 2016 and 2015, our capital expenditures were approximately $125.2 million, $52.2 million and $137.7 million, respectively, which includes approximately $23.8 million, $10.5 million and $62.1 million of capital expenditures related to the investment agreement with the Management Committee of the Chengdu Hi-Tech Industrial Development Zone (the “CDHT”) for 2017, 2016 and 2015, respectively. Our capital expenditures for these periods were primarily related to manufacturing expansion in our facilities in China and, to a lesser extent, our office buildings. Capital expenditures in 2017 were approximately 11.8% of our net sales.

- 38 -

---

In 2010, we announced an investment agreement with the Management Committee of the CDHT. Under this agreement, we formed an entity with a Chinese partner, Chengdu Ya Guang Electronic Company Limited (“Ya Guang”), to establish a semiconductor assembly and test facility in Chengdu, China. In December 2016, we increased our investment and currently own approximately 98% of the entity. The CDHT granted the entity a 50 year land lease, provides corporate and employee tax incentives, tax refunds, subsidies and other financial support. This is a long-term, multi-year project that will provide us additional capacity as needed. As of December 31, 2017, we have invested $157.2 million, primarily for infrastructure, buildings and equipment related capital expenditures.

As a result of enactment of the Tax Cuts and Jobs Act (the “Tax Act”) on December 22, 2017, all of our undistributed foreign subsidiary earnings immediately became subject to U.S. income tax.  We had not previously accrued U.S. taxes on these earnings, due to our policy of indefinitely reinvesting the earnings overseas.  Refer to the U.S. Tax Reform section in Item 7 and the Tax Cuts and Jobs Act section in Note 11 of the “Notes to Consolidated Financial Statements” in this Annual Report for further discussion.  Our undistributed foreign earnings continue to be indefinitely reinvested in foreign operations, with limited exceptions related to earnings of European subsidiaries.  Any future distributions of foreign earnings will not be subject to additional U.S. income tax, but may be subject to foreign withholding taxes.  As of December 31, 2017, our foreign subsidiaries held approximately $197 million of cash, cash equivalents and investments of which approximately $92 million would be subject to foreign withholding tax if distributed outside the country in which the related earnings were generated.

Restricted cash is pledged as collateral when we enter into agreements with banks for certain banking facilities. As of December 31, 2017, restricted cash of $1.4 million was pledged as collateral for issuance of bank acceptance notes and letters of credit.

As of December 31, 2017, we had short-term investments of approximately $4.6 million. These investments are highly liquid with maturity dates greater than three months at the date of purchase.  The decrease from $29.8 million in 2016, to $4.6 million in 2017 reflects the liquidation of a portion of the short-term investment portfolio acquired as part of Pericom, as we used the funds to reduce our debt and purchase our Common Stock.  We generally can access these investments in a relatively short amount of time but in doing so we generally forfeit a portion of interest income.

Discussion of Cash Flows

Cash and cash equivalents decreased approximately $44.0 million to $203.8 million in 2017 from $247.8 million in 2016.  The decrease was primarily due to cash being used for capital expenditures and the repayment of long-term debt undertaken to purchase Pericom. Cash and cash equivalents increased approximately $29.4 million to $247.8 million in 2016 from $218.4 million in 2015.  The increase was due to higher cash flow from operations and lower levels of cash used in investing and financing activities when compared to the prior year.  

 

Operating Activities

Net cash provided by operating activities for 2017 was approximately $181.1 million, due primarily to $96.2 million of depreciation and amortization, $25.3 million of deferred tax assets, $18.6 million from non-cash share-based compensation, and an increase in working capital accounts of $40.6 million. Net cash provided by operating activities for 2016 was approximately $124.7 million, due primarily to $18.5 million of net income, $100.9 million in depreciation and amortization, $14.0 million from non-cash share-based compensation and a net increase in operating capital assets and liabilities of $5.5 million.  These positive effects to operating cash flow were partially offset by the negative effect of a change in deferred income taxes of $14.9 million. Net cash provided by operating activities for 2015 was approximately $118.1 million, due primarily to $26.5 million of net income, $80.8 million in depreciation and amortization, $19.0 million from non-cash share-based compensation, partially offset by a total of approximately $9.9 million net decrease in other operating asset and operating liability accounts.  

- 39 -

---

Investing Activities

Net cash used by investing activities for 2017 was approximately $78.3 million, due primarily to $111.2 million in cash capital expenditures, $12.2 million in purchases of short-term investments and a $7.0 million grant from a foreign government, partially offset by a $38.6 million sale of short-term investments. Net cash used by investing activities for 2016 was approximately $27.4 million, due primarily to $58.5 million used for purchases of property, plant and equipment.  This use of cash for investing was partially offset by a net decrease in short-term investments of $32.7 million. Net cash used by investing activities for 2015 was approximately $459.4 million.  Included in our investing activities is $348.9 million of acquisitions, net of cash acquired.  We had capital expenditures of $133.2 million.  We had sales of short-term investments, net of purchases of approximately $18.0 million.

Financing Activities

Net cash used by financing activities for 2017 was approximately $158.1 million, due primarily to a $159.9 million net reduction of debt and an $8.7 million repurchase of Common Stock, partially offset by $13.6 million in proceeds from stock option exercises. Net cash used in financing activities for 2016 was approximately $63.5 million, due primarily to the net repayment of long-term debt of $36.4 million, the repurchase of 691,196 shares of the Company’s common stock for $18.0 million, the payment of dividends to noncontrolling interest of $4.9 million, payment of taxes on net share settlement of $2.5 million related to vesting of Diodes stock awards for Pericom employees and payment of $2.0 million of debt issuance costs from refinancing our long-term debt. Net cash provided by financing activities for 2015 was approximately $321.4 million, due primarily to the additional debt of approximately $391.2 million we incurred to purchase Pericom.  This increase was partially offset by the repayment of approximately $66.0 million of long-term debt during 2015.

Debt instruments

 

The U.S. Credit Facility contains certain financial and non-financial covenants, including, but not limited to, a maximum Consolidated Leverage Ratio, a minimum Consolidated Fixed Charge Coverage Ratio, and restrictions on liens, indebtedness, investments, fundamental changes, dispositions, and restricted payments (including dividends and share repurchases).

As of December 31, 2017, our Asia subsidiaries had unused and available credit lines of up to an aggregate of approximately $78.7 million, with several financial institutions. In some cases, our foreign credit lines are unsecured, uncommitted and may be repayable on demand, except for two Taiwanese credit facilities that are collateralized by assets. Our foreign credit lines bear interest at LIBOR or similar indices plus a specified margin. At December 31, 2017, $1.0 million was outstanding under these lines of credit. See “Liquidity and Capital Resources” above and Note 7 of “Notes to Consolidated Financial Statements” of this Annual Report for additional information.

Off-Balance Sheet Arrangements

We do not have any transactions, arrangements and other relationships with unconsolidated entities that will affect our liquidity or capital resources. We have no special purpose entities that provided off-balance sheet financing, liquidity or market or credit risk support, nor do we engage in leasing, hedging or research and development services, that could expose us to liability that is not reflected on the face of our financial statements.

Contractual Obligations

The following table represents our contractual obligations as of December 31, 2017 (in thousands):

 

Tax liabilities are not included in the above contractual obligations as we cannot make reasonable estimates of the amount and period in which those tax liabilities would be paid. See “Accounting for income taxes” below and Note 11 of “Notes to Consolidated Financial Statements” of this Annual Report for additional information. In addition to these purchase commitments, we have equity

- 40 -

---

investment obligations for our Chengdu facilities of $50 million, $25 million and $25 million for 2018, 2019 and 2020, respectively, and capital investment obligations of $62 million, $25 million and $29 million for 2018, 2019 and 2020, respectively.

 

Critical Accounting Policies and Estimates

The preparation of financial statements in conformity with U.S. GAAP requires that management make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of net sales and expenses during the reporting period. On an on-going basis, we evaluate our estimates, which are based upon historical experiences, market trends and financial forecasts and projections, and upon various other assumptions that management believes to be reasonable under the circumstances at that certain point in time. Actual results may differ, significantly at times, from these estimates under different assumptions or conditions.

We believe the following critical accounting policies and estimates affect the significant estimates and judgments we use in the preparation of our consolidated financial statements, and may involve a higher degree of judgment and complexity than others.

Revenue recognition

Net sales (revenue) are recognized when there is persuasive evidence that an arrangement exists, when delivery has occurred, when the price to the buyer is fixed or determinable and when collectability of the receivable is reasonably assured. These elements are met when title to the products is passed to the buyer, which is generally when product is shipped to the customer or when product is delivered to the customer. Generally, we recognize net sales upon shipment to manufacturers (direct ship) as well as upon sales to distributors using the “sell in” model, which is when product is shipped to the distributors (point of purchase).

Certain customers have limited rights of return or are entitled to price adjustments on products held in their inventory or upon sale to their end customers. We reduce net sales in the period of sale for estimates of product returns, distributor price adjustments and other allowances. Our reserve estimates are based upon historical data as well as projections of sales, distributor inventories, price adjustments, average selling prices and market conditions. Actual returns and adjustments could be significantly different from our estimates and provisions, resulting in an adjustment to net sales.

We record allowances/reserves for the following items: (i) ship and debit, which arise when we, from time to time based on market conditions, issue credit to certain distributors upon their shipments to their end customers; (ii) stock rotation, which are contractual obligations that permit certain distributors, up to four times a year, to return a portion of their inventory based on historical shipments to them in exchange for an equal and offsetting order; and (iii) price protection, which arise when market conditions cause average selling prices to decrease and we issue credit to certain distributors on their inventory.

Ship and debit reserves are recorded as a reduction to net sales with a corresponding reduction to accounts receivable. Stock rotation reserves are recorded as a reduction to net sales with a corresponding reduction to cost of goods sold for the estimated cost of inventory that is expected to be returned. Price protection reserves are recorded as a reduction to net sales with a corresponding increase in accrued liabilities.

Inventories

Inventories are stated at the lower of cost or net realizable value. Cost is determined principally by the first-in, first-out method. On an on-going basis, we evaluate our inventory for obsolescence and slow-moving items. This evaluation includes analysis of sales levels, sales projections, and purchases by item, as well as raw material usage related to our manufacturing facilities. If our review indicates a reduction in utility below carrying value, we reduce our inventory to a new cost basis. If future demand or market conditions are different than our current estimates, an inventory adjustment may be required, and would be reflected in cost of goods sold in the period the revision is made.

Accounting for income taxes

As part of the process of preparing our consolidated financial statements, we are required to estimate our income taxes in each of the tax jurisdictions in which we operate. This process involves using an asset and liability approach whereby deferred tax assets and liabilities are recorded for differences in the financial reporting bases and tax bases of our assets and liabilities. A valuation allowance is provided against deferred tax assets unless it is more likely than not that such deferred tax assets will be realized. This analysis requires considerable judgment and is subject to change to reflect future events and changes in the tax laws.

The benefit of a tax position is recognized only if it is more likely than not that the tax position would be sustained based on its technical merits in a tax examination, using the presumption the tax authority has full knowledge of all relevant facts regarding the

- 41 -

---

position. The amount of benefit recognized is the largest amount of tax benefit that is greater than 50% likely of being realized on ultimate settlement with the tax authority. For tax positions not meeting the more likely than not test, no tax benefit is recorded.

Goodwill and other indefinite lived intangible assets

Goodwill and other indefinite lived assets are tested for impairment on an annual basis or when an event or changes in circumstances indicate that its carrying value may not be recoverable. Goodwill impairment is tested at the reporting unit level, which is defined as an operating segment or one level below the operating segment. Diodes has one operating segment. Goodwill is reviewed for impairment using either a qualitative assessment or a quantitative goodwill impairment test. If we choose to perform a qualitative assessment and determine the fair value more likely than not exceeds the carrying value, no further evaluation is necessary. When we perform the quantitative goodwill impairment test, we compare fair value to carrying value, which includes goodwill. If fair value of exceeds carrying value, the goodwill is not considered impaired. If the carrying value is higher than the fair value, the difference would be recognized as an impairment loss. 

Defined benefit plan

We maintain a pension plan covering certain of our employees in the U.K. For financial reporting purposes, the net pension and supplemental retirement benefit obligations and the related periodic pension costs are calculated based upon, among other things, assumptions of the discount rate for plan obligations, estimated return on pension plan assets and mortality rates. These obligations and related periodic costs are measured using actuarial techniques and assumptions. The projected unit credit method is the actuarial cost method used to compute the pension liabilities and related expenses.

Contingencies

From time to time, we are involved in a variety of legal matters that arise in the normal course of business. Based on information available, we evaluate the likelihood of potential outcomes. We record the appropriate liability when the amount is deemed probable and reasonably estimable. In addition, we do not accrue for estimated legal fees and other directly related costs as they are expensed as incurred.

Derivative Instruments and Hedging Activities

 

Accounting Standards Codification 815, Derivatives and Hedging (“ASC 815”), provides the disclosure requirements for derivatives and hedging activities with the intent to provide users of financial statements with an enhanced understanding of: (a) how and why an entity uses derivative instruments, (b) how the entity accounts for derivative instruments and related hedged items, and (c) how derivative instruments and related hedged items affect an entity’s financial position, financial performance, and cash flows. Further, qualitative disclosures are required that explain the entity’s objectives and strategies for using derivatives, as well as quantitative disclosures about the fair value of and gains and losses on derivative instruments, and disclosures about credit-risk-related contingent features in derivative instruments.

As required by ASC 815, the Company records all derivatives on the balance sheet at fair value.  The accounting for changes in the fair value of derivatives depends on the intended use of the derivative, whether the Company has elected to designate a derivative in a hedging relationship and apply hedge accounting and whether the hedging relationship has satisfied the criteria necessary to apply hedge accounting. Derivatives designated and qualifying as a hedge of the exposure to variability in expected future cash flows, or other types of forecasted transactions, are considered cash flow hedges. Hedge accounting generally provides for the matching of the timing of gain or loss recognition on the hedging instrument with the recognition of the changes in the fair value of the hedged asset or liability that are attributable to the hedged risk in a fair value hedge or the earnings effect of the hedged forecasted transactions in a cash flow hedge.  

Recently Issued Accounting Pronouncements

See Note 1 of “Notes to Consolidated Financial Statements” of this Annual Report for additional information regarding the status of recently issued accounting pronouncements.

 

 

Foreign Currency Risk

We face exposure to adverse movements in foreign currency exchange rates, primarily in Asia and Europe. Our foreign currency risk may change over time as the level of activity in foreign markets grows and could have a material adverse impact upon our financial results. Certain of our assets, including certain bank accounts and accounts receivable, and liabilities exist in non–U.S. dollar denominated currencies, which are sensitive to foreign currency exchange fluctuations. These currencies are principally the Chinese Yuan, the Taiwanese dollar, the Euro, and the British Pound Sterling and, to a lesser extent, the Japanese Yen and the Hong Kong

- 42 -

---

dollar. We have entered into hedging arrangements designed to mitigate foreign currency fluctuations. See “Risk Factors – We are subject to foreign currency risk as a result of our international operations.” in Part I, Item 1A of this Annual Report for additional information.

Effect on Reporting Income

Certain of our subsidiaries have a functional currency that differs from the currencies in which some of their expenses are denominated. Our income and expenses are based on a mix of currencies and a decline in one currency relative to the other currencies could adversely affect our results of operations. Furthermore, our results of operations are reported in U.S. dollars, which is our reporting currency. In the event the U.S. dollar weakens against a foreign currency, we will experience a currency transaction loss, which could adversely affect our results of operations. Based on our results for the twelve months ended December 31, 2017, if a foreign currency were to weaken (or strengthen) by 1.0% against the U.S. dollar, we would experience currency transaction gain (or loss) of approximately $1 million.

Foreign Currency Transaction Risk

We also are subject to foreign currency risk arising from intercompany transactions that are expected to be settled in cash in the near term where the cash balances are held in denominations other than our subsidiaries’ functional currency. If exchange rates weaken against the functional currency, we would incur a remeasurement gain in the value of the cash balances, and if the exchange rates strengthen against the functional currency, we would incur a remeasurement loss in the value of the cash balances, assuming the net monetary asset balances remained constant. Our ultimate realized gain or loss with respect to currency fluctuations will generally depend on the size and type of transaction, the size and currencies of the net monetary assets and the changes in the exchange rates associated with these currencies. Based on balances at December, 31, 2017, if the Chinese Yuan, the Taiwanese dollar, the Euro and the British Pound Sterling were to weaken (or strengthen) by 1.0% against the U.S. dollar, we would experience currency transaction gain (or loss) of less than $1 million per quarter. Net foreign exchange transaction gains (or losses) are included in other income and expense.

Foreign Currency Translation Risk

When our foreign subsidiaries’ books are maintained in their functional currency, fluctuations in foreign currencies impact the amount of total assets and liabilities that we report for our foreign subsidiaries upon the translation of these amounts into U.S. dollars for reporting purposes. All elements of the subsidiaries’ financial statements, except for stockholders’ equity accounts, are translated using a currency exchange rate. Assets and liabilities denominated in foreign currencies are translated at the exchange rate on the balance sheet date. Income and expense accounts denominated in foreign currencies are translated at the weighted-average exchange rate during the period presented. Resulting translation adjustments are recorded as a separate component of accumulated other comprehensive income or loss within stockholders’ equity in the consolidated balance sheets, which are accumulated in this account until sale or liquidation of the foreign entity investment, at which time they are reported as adjustments to the gain or loss on sale of investment.

Foreign Currency Denominated Defined Benefit Plans

We have a contributory defined benefit plan that covers certain employees in the U.K., which is closed to new entrants and frozen with respect to future benefit accruals. The retirement benefit is based on the final average compensation and service of each eligible employee. December 31 is our annual measurement date, and on the measurement date, defined benefit plan assets are determined based on fair value. Defined benefit plan assets consist primarily of high quality corporate bonds and stocks that are denominated in the currency in which the benefits will be paid and that have terms to maturity approximating to the terms of the related pension liability. The net pension and supplemental retirement benefit obligations and the related periodic costs are based on, among other things, assumptions of the discount rate, estimated return on plan assets and mortality rates. These obligations and related periodic costs are measured using actuarial techniques and assumptions. The projected unit credit method is the actuarial cost method used to compute the pension liabilities and related expenses.

- 43 -

---

As of December 31, 2017, the plan was underfunded and a liability of approximately $31.8 million was reflected in our consolidated financial statements as a noncurrent liability. The amount recognized in accumulated other comprehensive income was a net loss of $44.0 million. If the British Pound Sterling were to (weaken) or strengthen by 1.0% against the U.S. dollar, we would experience currency translation liability (decrease) or increase of less than $1 million. The weighted-average discount rate assumption used to determine benefit obligations as of December 31, 2017 was 2.6%. A 0.2% increase/(decrease) in the discount rate used to calculate the net period benefit cost for the year would reduce/increase annual benefit cost by less than $0.5 million. A 0.2% increase/(decrease) in the discount rate used to calculate the year-end projected benefit obligation would increase/(decrease) the year–end projected benefit obligation by approximately $6.4 million. The expected return on plan assets is determined based on historical and expected future returns of the various assets classes and as such, each 1.0% increase/(decrease) in the expected rate of return assumption would increase/(decrease) the net period benefit cost by approximately $1.3 million. The asset value of the defined benefit plan has been volatile in recent years due primarily to wide fluctuations in the U.K. equity markets and bond markets. See “Risk Factors - Changes in actuarial assumptions for our defined benefit plan could increase the volatility of the plan’s asset value, require us to increase cash contributions to the plan and have a negative impact on our cash flows, operating results and financial condition” in Part I, Item 1A of this Annual Report for additional information.

Interest Rate Risk

We have credit facilities with financial institutions in the U.S., Asia and Europe as well as other debt instruments with interest rates equal to LIBOR or similar indices plus a negotiated margin. A rise in interest rates could have an adverse impact upon our cost of working capital and our interest expense.  Through the use of financial instruments, we have hedged $220.0 million of our floating rate debt.  As a matter of policy, we do not enter into derivative transactions for speculative purposes. As of December 31, 2017, our outstanding principal debt included $268.8 million outstanding under our revolving senior credit facility and term loan, $1.3 million outstanding under foreign long term liabilities and $0.9 million used for import and export guarantees and bank acceptance notes. Based on our debt balances at December, 31, 2017, an increase or decrease in interest rates by 1.0% for the year on our credit facilities would increase or decrease our annual interest rate expense by less than $1.0 million, net of the amounts realized from our interest rate swaps. See “Risk Factors,” – “We are subject to interest rate risk that could have an adverse effect on our cost of working capital and interest expenses, which could adversely affect our business, operating results and financial condition” in Part I, Item 1A of this Annual Report for additional information.

Political Risk

We have a significant portion of our assets in mainland China, Taiwan and the U.K. The possibility of political conflict between any of these countries or with the U.S. could have a material adverse impact upon our ability to transact business through these important business channels and to generate profits. See “Risk Factors” – Risks Related to our International Operations” in Part I, Item 1A of this Annual Report for additional information.

Inflation Risk

Inflation did not have a material effect on net sales or net income in fiscal year 2017. A significant increase in inflation could affect future performance.

Credit Risk

The success of our business depends, among other factors, on the strength of the global economy and the stability of the financial markets, which in turn affect our customers’ demand for our products, the ability of our customers to meet their payment obligations, the likelihood of customers canceling or deferring existing orders and the strength of consumer demand for items containing our products in the end-markets we serve. We provide credit to customers in the ordinary course of business and perform ongoing credit evaluations, while at times providing extended terms. We believe that our exposure to concentrations of credit risk with respect to trade receivables is largely mitigated by dispersion of our customers over various geographic areas, operating primarily in electronics manufacturing and distribution. We believe our allowance for doubtful accounts is sufficient to cover customer credit risks.

See Part IV, Item 15 “Exhibits and Financial Statement Schedules” for our consolidated financial statements and the notes and schedules thereto filed as part of this Annual Report.

Not Applicable.

- 44 -

---

Disclosure Controls and Procedures

Our Chief Executive Officer, Keh-Shew Lu, and Chief Financial Officer, Richard D. White, with the participation of our management, carried out an evaluation as of December 31, 2017 of the effectiveness of our disclosure controls and procedures (as defined in Rule 13a-15(e) and Rule 15d-15(e) of the Securities Exchange Act of 1934, as amended). Based upon that evaluation, the Chief Executive Officer and the Chief Financial Officer believe that, as of the end of the period covered by this report, our disclosure controls and procedures are effective at the reasonable assurance level to ensure that information required to be included in this report is:

 

Disclosure controls and procedures, no matter how well designed and implemented, can provide only reasonable assurance of achieving an entity’s disclosure objectives. The likelihood of achieving such objectives is affected by limitations inherent in disclosure controls and procedures. These include the fact that human judgment in decision-making can be faulty and that breakdowns in internal control can occur because of human failures such as simple errors, mistakes or intentional circumvention of the established processes.

 

Management's Annual Report on Internal Control Over Financial Reporting

Management is responsible for establishing and maintaining adequate internal control over financial reporting. Internal control over financial reporting is a process designed by, or under the supervision of, our Chief Executive Officer and Chief Financial Officer and implemented by our Board of Directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles in the United States of America (“U.S. GAAP”).

Our internal control over financial reporting includes those policies and procedures that: (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with U.S. GAAP, and that receipts and expenditures of ours are being made only in accordance with authorizations of our management and directors; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Under the supervision and with the participation of management, including our Chief Executive Officer and the Chief Financial Officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting based on the framework and criteria established in Internal Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”). This evaluation included review of the documentation of controls, testing of operating effectiveness of controls and a conclusion on this evaluation. Based on this evaluation, management concluded that our internal control over financial reporting was effective as of December 31, 2017.

The effectiveness of our internal control over financial reporting as of December 31, 2017 has been audited by Moss Adams LLP, an independent registered public accounting firm, as stated in their report which appears in Item 8 of this Annual Report on Form 10-K.

 

Changes in Internal Control Over Financial Reporting

There was no change in our internal control over financial reporting, known to the Chief Executive Officer or the Chief Financial Officer, that occurred during the last fiscal quarter covered by this report that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

None.

 

 

 

- 45 -

---

PART III

The information concerning our directors, executive officers and corporate governance is incorporated herein by reference from the section entitled “Proposal One – Election of Directors” contained in our definitive proxy statement to be filed pursuant to Section 14(a) of the Securities Exchange Act of 1934 within 120 days after our fiscal year end of December 31, 2017, for our annual stockholders’ meeting for 2018 (the “Proxy Statement”).

We have adopted a code of ethics that applies to our Chief Executive Officer and senior financial officers. The code of ethics has been posted on our website under the Corporate Governance portion of the Investor Relations section at www.diodes.com. We intend to satisfy disclosure requirements regarding amendments to, or waivers from, any provisions of our code of ethics on our website.

 

The information concerning executive compensation is incorporated herein by reference from the sections entitled “Compensation Discussion and Analysis,” “Executive Compensation,” and “Compensation Committee Interlocks and Insider Participation” contained in the Proxy Statement.

 

The information concerning the security ownership of certain beneficial owners and management and related stockholder matters is incorporated herein by reference from the sections entitled “General Information – Security Ownership of Certain Beneficial Owners and Management,” and “Executive Compensation - Equity Compensation Plan Information” contained in the Proxy Statement.

 

The information concerning certain relationships, related transactions and director independence is incorporated herein by reference from the sections entitled “Corporate Governance – Certain Relationships and Related Person Transactions” and “Corporate Governance – Director Independence” and “Proposal One – Election of Directors” contained in the Proxy Statement.

 

The information concerning our principal accountant’s fees and services is incorporated herein by reference from the section entitled “Ratification of the Appointment of Independent Registered Public Accounting Firm” contained in the Proxy Statement.

 

 

 

- 46 -

---

PART IV

 

 

Our consolidated financial statements are as set forth under Item 8 of this report on Form 10-K.

 

(2)     Schedules:

         None

Schedules not listed above have been omitted because the information required to be set forth therein is not applicable or is shown in the financial statements and note thereto.

The exhibits listed on the Index to Exhibits are filed as exhibits or incorporated by reference to this Annual Report.

Not Applicable.

 

 

Item 16.  Form 10-K Summary.

None

 

- 47 -

---

Report of Independent Registered Public Accounting Firm

 

To the stockholders and the Board of Directors of

Diodes Incorporated

 

Opinions on the Financial Statements and Internal Control over Financial Reporting

 

We have audited the accompanying consolidated balance sheets of Diodes Incorporated and Subsidiaries (the “Company”) as of December 31, 2017 and 2016, the related consolidated statements of income, comprehensive (loss) income, equity, and cash flows for each of the three years in the period ended December 31, 2017, and the related notes (collectively referred to as the “consolidated financial statements”). We also have audited the Company’s internal control over financial reporting as of December 31, 2017, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”).

 

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the consolidated financial position of the Company as of December 31, 2017 and 2016, and the consolidated results of its operations and its cash flows for each of the three years in the period ended December 31, 2017, in conformity with accounting principles generally accepted in the United States of America. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2017, based on criteria established in Internal Control - Integrated Framework (2013) issued by COSO.

 

Basis for Opinions

 

The Company’s management is responsible for these consolidated financial statements, for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Annual Report on Internal Control over Financial Reporting included in Item 9A. Our responsibility is to express an opinion on the Company’s consolidated financial statements and an opinion on the Company’s internal control over financial reporting based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

 

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud, and whether effective internal control over financial reporting was maintained in all material respects.

 

Our audits of the consolidated financial statements included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures to respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

 

Definition and Limitations of Internal Control Over Financial Reporting

 

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding

- 48 -

---

prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

/s/ Moss Adams LLP

 

We have served as the Company’s auditor since 1993.

Los Angeles, California

February 19, 2018

 

 

 

- 49 -

---

DIODES INCORPORATED AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

(In thousands, except share and per share amounts)

 

 

The accompanying notes are an integral part of these consolidated financial statements.

- 50 -

---

 

DIODES INCORPORATED AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF INCOME

(In thousands, except per share data)

 

 

The accompanying notes are an integral part of these consolidated financial statements.

 

 

 

- 51 -

---

DIODES INCORPORATED AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF COMPREHENSIVE (LOSS) INCOME

(In thousands)

 

The accompanying notes are an integral part of these consolidated financial statements.

 

 

 

- 52 -

---

DIODES INCORPORATED AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF EQUITY

(In thousands)

 

The accompanying notes are an integral part of these consolidated financial statements.

 

 

 

- 53 -

---

DIODES INCORPORATED AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

(In thousands) 

The accompanying notes are an integral part of these consolidated financial statements.

- 54 -

---

 

 

DIODES INCORPORATED AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS (Continued)

(In thousands)

 

The accompanying notes are an integral part of these consolidated financial statements.

 

 

 

- 55 -

---

 

DIODES INCORPORATED AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(Table amounts in thousands except per share data)

 

Note 1 – Summary of Operations and Significant Accounting Policies

Nature of operations – Diodes Incorporated and its subsidiaries (collectively, the “Company” or “we” or “our”) is a leading global manufacturer and supplier of high-quality application specific standard products within the broad discrete, logic, analog and mixed-signal semiconductor markets. Diodes serves the consumer electronics, computing, communications, industrial, and automotive markets. Diodes’ products include diodes, rectifiers, transistors, MOSFETs, protection devices, function-specific arrays, logic, amplifiers and comparators, Hall-effect and temperature sensors, power management devices, including LED drivers, AC-DC converters and controllers, DC-DC switching and linear voltage regulators, and voltage references along with special function devices, such as USB power switches, load switches, voltage supervisors, and motor controllers. Diodes’ corporate headquarters and Americas’ sales office are located in Plano, Texas and Milpitas, California. Design, marketing, and engineering centers are located in Plano; Milpitas; Taipei, Taiwan; Taoyuan City, Taiwan; Zhubei City, Taiwan; Manchester, England; and Neuhaus, Germany. Diodes’ wafer fabrication facilities are located in Manchester and Shanghai, China. Diodes has assembly and test facilities located in Shanghai, Jinan, Chengdu, and Yangzhou, China, as well as in Hong Kong, Neuhaus and Taipei. Additional engineering, sales, warehouse, and logistics offices are located in Taipei; Hong Kong; Manchester; Shanghai; Shenzhen, China; Seongnam-si, South Korea; and Munich, Germany, with support offices throughout the world.  Our products are sold primarily throughout Asia, North America and Europe.  During 2017, we shut down and transferred our wafer fabrication operation located in Lee’s Summit, MO, (“KFAB”) to other Company-owned wafer fabrication plants and external foundries. See Note 18 below for additional information related to the KFAB shutdown.

On November 24, 2015 we acquired Pericom Semiconductor Corporation. Pericom designs, develops and markets high-performance integrated circuits (“ICs”) and frequency control products (“FCPs”) used in many of today’s advanced electronic systems. ICs include functions that support the connectivity, timing and signal conditioning of high-speed parallel and serial protocols that transfer data among a system’s microprocessor, memory and various peripherals, such as displays and monitors, and between interconnected systems. FCPs are electronic components that provide frequency references such as crystals and oscillators for computer, communication and consumer electronic products. Analog, digital and mixed-signal ICs, together with FCPs enable higher system bandwidth and signal quality, resulting in better operating reliability, signal integrity, and lower overall system cost in applications such as notebook computers, servers, network switches and routers, storage area networks, digital TVs, cell phones, GPS and digital media players. Analog, digital and mixed-signal ICs, together with FCPs enable higher system bandwidth and signal quality, resulting in better operating reliability and signal integrity, and lower overall system cost in applications such as notebook computers, servers, network switches and routers, storage area networks, digital TVs, cell phones, GPS and digital media players.

Principles of consolidation – The consolidated financial statements include the accounts of Diodes Incorporated, its wholly-owned subsidiaries and its controlled majority-owned subsidiaries. We account for equity investments in companies over which we have the ability to exercise significant influence, but do not hold a controlling interest, under the equity method, and we record our proportionate share of income or losses in interest and other, net in the consolidated statements of income. All significant intercompany balances and transactions have been eliminated.

Use of estimates – The preparation of financial statements in conformity with generally accepted accounting principles in the United States of America (“GAAP”) requires that management make estimates and assumptions that affect the amounts reported in the consolidated financial statements and accompanying notes. The level of uncertainty in estimates and assumptions increases with the length of time until the underlying transactions are completed. Actual results may differ from these estimates in amounts that may be material to the consolidated financial statements and accompanying notes.

Revenue recognition – Net sales (revenue) are recognized when there is persuasive evidence that an arrangement exists, when delivery has occurred, when the price to the buyer is fixed or determinable and when collectability of the receivable is reasonably assured. These elements are met when title to the products is passed to the buyers, which is generally when product is shipped to the customers. Generally, we recognize net sales upon shipment to manufacturers (direct ship) as well as upon sales to distributors using the “sell in” model, which is when product is shipped to the distributors (point of purchase).

Certain customers have limited rights of return and/or are entitled to price adjustments on products held in their inventory or upon sale to their end customers. We reduce net sales in the period of sale for estimates of product returns, distributor price adjustments and other allowances. Our reserve estimates are based upon historical data as well as projections of sales, distributor inventories, price adjustments, average selling prices and market conditions.

We record allowances/reserves for the following items: (i) ship and debit, which arise when we, from time to time based on market conditions, issue credit to certain distributors upon their shipments to their end customers; (ii) stock rotation, which are

- 56 -

---

contractual obligations that permit certain distributors, up to four times a year, to return a portion of their inventory based on historical shipments to them in exchange for an equal and offsetting order; and (iii) price protection, which arise when market conditions cause average selling prices to decrease and we issue credit to certain distributors on their inventory.

Ship and debit reserves are recorded as a reduction to net sales with a corresponding reduction to accounts receivable. Stock rotation reserves are recorded as a reduction to net sales with a corresponding reduction to cost of goods sold for the estimated cost of inventory that is expected to be returned. Price protection reserves are recorded as a reduction to net sales with a corresponding increase in accrued liabilities. Net sales are reduced in the period of sale for estimates of product returns and other allowances including distributor adjustments, which were approximately $158.1 million, $132.9 million and $113.5 million in 2017, 2016 and 2015, respectively.

Product warranty – We generally warrant our products for a period of one year from the date of sale. Historically, warranty expense has not been material.

Cash, cash equivalents, and short-term investments – We consider all highly liquid investments with maturity of three months or less at the date of purchase to be cash equivalents. We currently maintain substantially all of our day-to-day operating cash balances with major financial institutions.  We hold short-term investments consisting of time deposits, which are highly liquid with maturity dates greater than three months at the date of purchase. Generally, we can access these investments in a relatively short amount of time but in doing so we generally forfeit a portion of interest income.  See Note 2 below for additional information regarding fair value of financial instruments.

Allowance for doubtful accounts – We evaluate the collectability of our accounts receivable based upon a combination of factors, including the current business environment and historical experience. If we are aware of a customer’s inability to meet its financial obligations, we record an allowance to reduce the receivable to the amount we reasonably believe will be collected from the customer. For all other customers, we record an allowance based upon the amount of time the receivables are past due. If actual accounts receivable collections differ from these estimates, an adjustment to the allowance may be necessary with a resulting effect on operating expense. Accounts receivable are presented net of valuation allowance, which were approximately $4.5 million in 2017 and $2.1 million 2016.

Inventories – Inventories are stated at the lower of cost or net realizable value. Cost is determined principally by the first-in, first-out method. Cost includes materials, labor, and manufacturing overhead related to the purchase and production of inventories. Any write-down of inventory to the lower of cost or net realizable value at the close of a fiscal period creates a new cost basis that subsequently would not be marked up based on changes in underlying facts and circumstances. On an on-going basis, we evaluate inventory for obsolescence and slow-moving items. This evaluation includes analysis of sales levels, sales projections, and purchases by item, as well as raw material usage related to our manufacturing facilities. If our review indicates a reduction in utility below carrying value, we reduce inventory to a new cost basis. If future demand or market conditions are different than our current estimates, an inventory adjustment to write down inventory may be required, and would be reflected in cost of goods sold in the period the revision is made.

Property, plant and equipment – Purchased property, plant and equipment is recorded at historical cost, and property, plant and equipment acquired in a business combination is recorded at fair value on the date of acquisition. Property, plant and equipment is depreciated using straight-line methods over the estimated useful lives, which range from 20 to 55 years for buildings and 3 to 10 years for machinery and equipment. The estimated lives of leasehold improvements range from 3 to 5 years, and are amortized over the shorter of the remaining lease term or their estimated useful lives.

Goodwill and other indefinite lived intangible assets – Goodwill and indefinite lived assets are tested for impairment on an annual basis or when an event or changes in circumstances indicate that its carrying value may not be recoverable. Goodwill impairment is tested at the reporting unit level, which is defined as an operating segment or one level below the operating segment.  Diodes has one operating segment. No goodwill impairment occurred in 2017, 2016, or 2015. Goodwill is reviewed for impairment using either a qualitative assessment or a quantitative goodwill impairment test. If we choose to perform a qualitative assessment and determine the fair value more likely than not exceeds the carrying value, no further evaluation is necessary. When we perform the quantitative goodwill impairment test, we compare fair value to carrying value, which includes goodwill. If fair value of exceeds carrying value, the goodwill is not considered impaired. If the carrying value is higher than the fair value, the difference would be recognized as an impairment loss.            

Impairment of long-lived assets – Our long-lived assets are reviewed whenever events or changes in circumstances indicate that the carrying value may not be recoverable. We consider assets to be impaired if the carrying value exceeds the undiscounted projected cash flows from operations. If impairment exists, the assets are written down to fair value or to the projected discounted cash flows from related operations. As of December 31, 2017, we expect the remaining carrying value of assets to be recoverable. During 2017 we had recognized an impairment of long-lived assets related to the KFAB fixed assets.  See Note 18 below for additional information related to the KFAB shut down.

- 57 -

---

 

Business combinations – The Company recognizes all (and only) the assets acquired and liabilities assumed in the transaction and establishes the acquisition-date fair value as the measurement objective for all assets acquired and liabilities assumed in a business combination. Certain provisions prescribe, among other things, the determination of acquisition-date fair value of consideration paid in a business combination (including contingent consideration) and the exclusion of transaction and acquisition-related restructuring costs from acquisition accounting.  During the normal course of business the Company makes acquisitions. In the event that an individual acquisition (or an aggregate of acquisitions) is material, appropriate disclosure of such acquisition activity is provided.  See Note 19 for additional information regarding business combinations.

Income taxes – Income taxes are accounted for using an asset and liability approach whereby deferred tax assets and liabilities are recorded for differences in the financial reporting bases and tax bases of our assets and liabilities. If it is more likely than not that some portion of deferred tax assets will not be realized, a valuation allowance is recorded.

GAAP prescribes a comprehensive model for how companies should recognize, measure, present, and disclose in their financial statements uncertain tax positions taken or expected to be taken on a tax return. Tax positions shall initially be recognized in the financial statements when it is more likely than not the position will be sustained upon examination by the tax authorities. Such tax positions shall initially and subsequently be measured as the largest amount of tax benefit that is greater than 50% likely of being realized upon ultimate settlement with the tax authority assuming full knowledge of the position and all relevant facts. All deferred income taxes are classified as noncurrent assets or noncurrent liabilities on the consolidated balance sheet as of December 31, 2017 and 2016, respectively.

The Tax Cuts and Jobs Act (the “Tax Act”) was enacted on December 22, 2017. The Tax Act reduces the U.S. federal corporate tax rate from 35% to 21%, requires companies to pay a one-time transition tax on earnings of certain foreign subsidiaries that were previously tax deferred, provides an exemption from U.S. federal tax for dividends received from foreign subsidiaries, and creates new taxes on certain foreign sourced earnings. As of the completion of these financial statements and related disclosures, we have not completed our accounting for the tax effects of the Tax Act; however, as described below, we have made a reasonable estimate of such effects and recorded a provisional tax expense of approximately $45.9 million, which is included as a component of income tax expense from continuing operations in the fourth quarter of 2017.  This provisional tax expense incorporates assumptions made based upon the Company’s current interpretation of the Tax Act, and may change as we receive additional clarification and implementation guidance and as the interpretation of the Tax Act evolves. In accordance with SEC Staff Accounting Bulletin No. 118, the Company will finalize the accounting for the effects of the Tax Act no later than the fourth quarter of 2018.  Future adjustments made to the provisional effects will be reported as a component of income tax expense from continuing operations in the reporting period in which any such adjustments are determined. See Note 11 for additional information.

Research and development costs – Internally-developed research and development costs are expensed as incurred. Acquired in-process research and development (“IPR&D”) is capitalized as an indefinite-lived intangible asset and evaluated periodically for impairment. When the project is completed, an expected life is determined and the IPR&D is amortized as an expense over the expected life.

Shipping and handling costs – Shipping and handling costs for products shipped to customers, which are included in selling, general and administrative expenses, were approximately $15.2 million, $14.2 million and $8.3 million for the twelve months ended December 31, 2017, 2016 and 2015, respectively.

Concentration of credit risk – Financial instruments, which potentially subject us to concentrations of credit risk, include trade accounts receivable. Credit risk is limited by the dispersion of our customers over various geographic areas, operating primarily in electronics manufacturing and distribution. We perform on-going credit evaluations of our customers, and generally require no collateral. Historically, credit losses have not been significant.

We currently maintain substantially all of our day-to-day cash balances and short-term investments with major financial institutions. Cash balances are usually in excess of Federal and/or foreign deposit insurance limits.

Derivative instruments and hedging activities - The Company records all derivatives on the balance sheet at fair value. The accounting for changes in the fair value of derivatives depends on the intended use of the derivative, whether the Company has elected to designate a derivative in a hedging relationship and apply hedge accounting and whether the hedging relationship has satisfied the criteria necessary to apply hedge accounting. Derivatives designated and qualifying as a hedge of the exposure to variability in expected future cash flows, or other types of forecasted transactions, are considered cash flow hedges. Hedge accounting generally provides for the matching of the timing of gain or loss recognition on the hedging instrument with the recognition of the changes in the fair value of the hedged asset or liability that are attributable to the hedged risk in a fair value hedge or the earnings effect of the hedged forecasted transactions in a cash flow hedge.  The Company may enter into derivative contracts that are intended to economically hedge certain of its risk, even though hedge accounting does not apply or the Company elects not to apply hedge

- 58 -

---

accounting.  We maintain derivative financial instruments with major financial institutions of investment grade credit rating and monitor the amount of credit exposure to any one issuer. We believe there are no significant concentrations of risk associated with our derivative financial instruments.

Valuation of financial instruments – The carrying value of our financial instruments, including cash and cash equivalents, short-term investments, accounts receivable, accounts payable, credit line, and long-term debt approximate fair value due to their current market conditions, maturity dates and other factors.

Earnings per share – Basic earnings per share is calculated by dividing net earnings attributable to common stockholders by the weighted-average number of shares of Common Stock outstanding during the period. Diluted earnings per share is calculated similarly but includes potential dilution from the exercise of stock options and stock awards, except when the effect would be anti-dilutive. Earnings per share are computed using the “treasury stock method.”

For the twelve months ended December 31, 2017, 2016 and 2015, options and share grants outstanding totaling approximately 3.5 million shares, 1.4 million shares and 1.4 million shares have been excluded from the computation of diluted earnings per share because their effect was anti-dilutive.

 

Share-based compensation – We use the Black-Scholes-Merton model to determine the fair value of stock options on the date of grant and recognize compensation expense for stock options on a straight-line basis. Restricted stock grants are measured based on the fair market value of the underlying stock on the date of grant and compensation expense is recognized on a straight-line basis over the requisite four-year service period.

The amount of compensation expense recognized using the Black-Scholes-Merton model requires us to exercise judgment and make assumptions relating to the factors that determine the fair value of our stock option grants. The fair value calculated by this model is a function of several factors, including the grant price, the expected future volatility, the expected term of the option and the risk-free interest rate of the option. The expected term and expected future volatility of the options require judgment. In addition, we are required to estimate the expected forfeiture rate and only recognize expense for those stock options expected to vest. We estimate the forfeiture rate based on historical experience, and to the extent our actual forfeiture rate is different from our estimate, share-based compensation expense is adjusted accordingly.

Treasury stock – Under a program authorized by our board of directors we have purchased shares of our common stock. These shares are recorded as treasury stock, at cost, as a reduction to stockholder’ equity.

Functional currencies and foreign currency translation – We translate the assets and liabilities of our non-U.S. dollar functional currency subsidiaries into U.S. dollars using exchange rates on the balance sheet date. Net sales and expense for these subsidiaries are translated at the weighted-average exchange rate during the period presented. Resulting translation adjustments are recorded as a separate component of accumulated other comprehensive income or loss within stockholders’ equity in the consolidated balance sheets. Included in other income are foreign exchange (losses) and gains of $(8.0) million, $2.2 million and $1.3 million for the twelve months ended December 31, 2017, 2016 and 2015, respectively.

Defined benefit plan – We maintain pension plans covering certain of our employees in the U.K. The overfunded or underfunded status of pension and postretirement benefit plans are recognized on the balance sheet. Actuarial gains and losses, and prior service costs or credits, are recognized in other comprehensive income (loss), net of tax effects, until they are amortized as a component of net periodic benefit cost. For financial reporting purposes, the net pension and supplemental retirement benefit obligations and the related periodic pension costs are calculated based upon, among other things, assumptions of the discount rate for plan obligations, estimated return on pension plan assets and mortality rates. These obligations and related periodic costs are measured

- 59 -

---

using actuarial techniques and assumptions. The projected unit credit method is the actuarial cost method used to compute the pension liabilities and related expenses.  The expected long-term return on plan assets was determined based on historical and expected future returns of the various asset classes. The plan’s investment policy includes a mandate to diversify assets and invest in a variety of asset classes to achieve its expected long-term return and is currently invested in a variety of funds representing most standard equity and debt security classes. Trustees of the plan may make changes at any time.

Investment in joint ventures – Investment in joint ventures over which we have the ability to exercise significant influence and that, in general, are at least 20 percent owned are accounted for using the equity method of accounting. These investments are evaluated for impairment, in which an impairment loss would be recorded whenever a decline in the value of an equity investment below its carrying amount is determined to be “other than temporary.” In judging “other than temporary,” we consider the length of time and extent to which the fair value of the investment has been less than the carrying amount of the investment, the near-term and longer-term operating and financial prospects of the investee, and our longer-term intent of retaining the investment in the investee.

Noncontrolling interest - Noncontrolling interest primarily relates to the minority investors’ share of the earnings of certain China and Taiwan subsidiaries. Noncontrolling interests are a separate component of equity and not a liability.   Increases or decreases in noncontrolling interest, due to changes in our ownership interest of the subsidiaries that leave control intact, are recorded as equity transactions. The noncontrolling interest in our subsidiaries and their equity balances are reported separately in the consolidated financial statements, and activities of these subsidiaries are included therein.

Contingencies – From time to time, we may be involved in a variety of legal matters that arise in the normal course of business. Based on information available, we evaluate the likelihood of potential outcomes. We record and disclose the appropriate liability when the amount is deemed probable and reasonably estimable. In addition, we do not accrue for estimated legal fees and other directly related costs as they are expensed as incurred.

Comprehensive income (loss) – GAAP generally requires that recognized revenue, expenses, gains and losses be included in net income. Although certain changes in assets and liabilities are reported as separate components of the equity section of the consolidated balance sheet, such items, along with net income, are components of comprehensive income or loss. The components of accumulated other comprehensive income or loss include foreign currency translation adjustments and unrealized gain or loss on defined benefit plan. Accumulated other comprehensive loss was approximately $83.5 million, $112.7 million and $84.4 million at December 31, 2017, 2016 and 2015, respectively.

There is no income tax expense or benefit associated with each component of comprehensive income. As of December 31, the accumulated balance for each component of comprehensive income is as follows:

 

Reclassifications – Certain immaterial amounts from prior periods have been reclassified to conform to the current years’ presentation.

 

Recently Accounting Pronouncements - The Financial Accounting Standards Board (“FASB”) issued the following Accounting Standards Updates (“ASU”) which could have potential impact to the Company’s financial statements:

 

In May 2014, the FASB issued ASU No. 2014-09, Revenue from Contracts with Customers (Topic 606). This standard provides a single set of guidelines for revenue recognition to be used across all industries and requires additional disclosures. It is effective for annual and interim reporting periods beginning after December 15, 2017. We will adopt this standard in the first quarter of 2018, and will apply the standard using the modified retrospective method. Further, we will elect the following applicable practical expedients;  

Our key revenue streams are Distribution and Original Equipment Manufacturer (“OEM”) sales, that combined comprise the majority of our business.  The current pattern of revenue recognition for these revenue streams is point-in-time, and that will not change upon the adoption of the new standard. Further, we have identified a number of variable consideration components within our contracts with customers, and have determined there will be no related impact. We have also determined that the impact of accounting

- 60 -

---

for costs incurred to obtain a contract is immaterial.  The adoption of this standard will not have a material effect on our consolidated financial statements, but will require the Company to provide additional and revised disclosures beginning with our Form 10-Q filing for the first quarter of 2018.

 

ASU No. 2016-02, Leases (Topic 842) (“ASU 2016-02”) - In February 2016, the FASB issued ASU 2016-02, which amends the accounting treatment for leases. The amendments are effective for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years. Lessees (for capital and operating leases) and lessors (for sales-type, direct financing, and operating leases) must apply a modified retrospective transition approach for leases existing at, or entered into after, the beginning of the earliest comparative period presented in the financial statements. The modified retrospective approach would not require any transition accounting for leases that expired before the earliest comparative period presented. Lessees and lessors may not apply a full retrospective transition approach. Early adoption is permitted. The Company is currently evaluating the impact that the adoption of ASU 2016-02 may have on its consolidated financial statements and has not elected early adoption as of the period ended December 31, 2017.  During the second quarter of 2017 we engaged outside accounting consultants to assist us in the implementation of this new standard.  The Company is in the process of assessing its outstanding leases.

ASU No. 2016-09, Compensation—Stock Compensation (Topic 718) Improvements to Employee Share-Based Payment Accounting - In March 2016, the FASB issued guidance to simplify the accounting for share-based payment transactions by requiring all excess tax benefits and deficiencies to be recognized in income tax expense or benefit in earnings, thus eliminating the requirement to classify the excess tax benefit and deficiencies as additional paid-in capital. Under the new guidance, an entity makes an accounting policy election to either estimate the expected forfeiture awards or account for forfeitures as they occur. We adopted ASU No. 2016-09 during the first quarter of 2017 and as a result will account for forfeitures as they occur.  The effect of the adoption related to the income tax portion was an increase of $4.8 million to retained earnings and to deferred income tax assets.  The effect of the adoption related to forfeitures was an increase to additional paid in capital of $0.8 million, an increase to deferred tax assets of $0.3 million and a decrease to retained earnings of $0.5 million.

 

ASU No. 2017-09, Compensation – Stock Compensation (Topic 718) Scope of Modification Accounting - In May 2017, the FASB issued guidance to clarify when to account for a change to the terms or conditions of a share-based payment award as a modification.  Under the new guidance, modification accounting is required only if the fair value, the vesting conditions, or the classification of the award (as equity or liability) changes as a result of the change in terms or conditions. The guidance is effective prospectively for all companies for annual periods beginning on or after December 15, 2017. Early adoption is permitted.  We early adopted this standard in the third quarter of 2017. Adoption of this standard had no impact on the Company’s financial statements.

 

ASU No. 2017-12, Derivatives and Hedging (Topic 815):  Targeted Improvements to Accounting for Hedging Activities – In August 2017, the FASB issued guidance that eliminates the requirement to separately measure and report hedge ineffectiveness.  The guidance is effective for public business entities for fiscal years beginning after December 15, 2018, including interim periods within those years. Early adoption is permitted in any interim period or fiscal period before the effective date. The Company adopted ASU No. 2017-12 during the third quarter of 2017. In accordance with ASU 2017-12, the Company recognizes all reclassifications out of other comprehensive income (other than those related to a hedged transaction becoming probable of not occurring) in the same income statement line item in which the earnings effect of the hedged item is being presented, which is consistent with the Company’s current policy.  Adoption of this standard had no impact on the Company’s financial statements.    

ASU No. 2015-11, Simplifying the Measurement of Inventory (“ASU 2015-11”).   This standard requires in scope inventory to be measured at the lower of cost and net realizable value. Net realizable value is the estimated selling price in the ordinary course of business, less reasonably predictable costs of completion, disposal, and transportation. The amendments do not apply to inventory that is measured using LIFO or the retail inventory method. The amendments apply to all other inventory, which includes inventory that is measured using first-in, first-out (“FIFO”) or average cost. The standard is effective for fiscal years beginning after December 15, 2016, including interim periods within those fiscal years and requires prospective application.  We adopted this standard in the first quarter of 2017.  The adoption had no material impact on our financial statements.   

 

ASU No. 2016-15, Statement of Cash Flows (Topic 230) Classification of Certain Cash Receipts and Cash Payments - In November 2016, the FASB issued an accounting standard update related to the presentation of restricted cash in the Company’s Consolidated Statement of Cash Flows. The update requires that the Consolidated Statement of Cash Flows explain the change during the period in cash, cash equivalents, and restricted cash. Restricted cash should be included with cash and cash equivalents when reconciling the beginning-of-period and end-of-period total amounts shown on the Consolidated Statement of Cash Flows. This accounting guidance is effective for the Company beginning in the first quarter of 2018. The Company will adopt this guidance for our fiscal year beginning January 1, 2018, and the guidance will result in changes to the Company’s Consolidated Statement of Cash Flows such that restricted cash amounts will be included in the beginning-of-period and end-of-period cash and cash equivalents totals, and will have no impact on our results of operations.  

 

- 61 -

---

ASU No. 2016-16, Income Taxes (Topic 740) Intra-Entity Transfers of Assets Other Than Inventory.  This standard requires that an entity should recognize the income tax consequences of an intra-entity transfer of an asset other than inventory when the transfer occurs.  Current GAAP prohibits the recognition of current and deferred income taxes for an intra-entity asset transfer until the asset has been sold to an outside party. The amendments in this standard are effective for annual reporting periods beginning after December 15, 2017, including interim reporting periods within those annual reporting periods.  The Company does not expect the adoption of this new standard to have a material effect on its financial statements.

 

ASU No. 2017-01, Clarifying the Definition of a Business.  This standard classifies the definition of a business with the objective of adding guidance to assist entities with evaluating whether transactions should be accounted for as acquisitions (or disposals) of assets or businesses.  This update is effective for annual periods beginning after December 15, 2017, including interim periods within those annual reporting periods, and would only apply to future acquisitions.

 

ASU 2017-04, Intangibles—Goodwill and Other (Topic 350) Simplifying the Test for Goodwill Impairment.  This standard simplifies the accounting for goodwill impairment. The guidance removes Step 2 of the goodwill impairment test, which requires a hypothetical purchase price allocation. Goodwill impairment will now be the amount by which a reporting unit’s carrying value exceeds its fair value, not to exceed the carrying amount of goodwill.  The revised guidance will be applied prospectively, and is effective for calendar year-end SEC filers for its annual or any interim goodwill impairment tests in fiscal years beginning after December 15, 2019.  Early adoption is permitted for interim or annual goodwill impairment tests performed on testing dates after January 1, 2017.  The Company adopted this standard in the third quarter of 2017.  Adoption of this standard had no impact on the Company’s financial statements.

 

Note 2 – Fair Value Measurements

Fair value is the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date.

We use valuation techniques that are consistent with the market approach, the income approach and/or the cost approach. The market approach uses prices and other relevant information generated by market transactions involving identical or comparable assets and liabilities. The income approach uses valuation techniques to convert future amounts, such as cash flows or earnings, to a single present amount on a discounted basis. The cost approach is based on the amount that currently would be required to replace the service capacity of an asset (replacement costs). Valuation techniques should be consistently applied. Inputs to valuation techniques refer to the assumptions that market participants would use in pricing the asset or liability. Inputs may be observable, meaning those that reflect the assumptions market participants would use in pricing the asset or liability developed based on market data obtained from independent sources, or unobservable, meaning those that reflect the reporting entity’s own assumptions about the assumptions market participants would use in pricing the asset or liability developed based on the best information available in the circumstances. These two types of inputs create a three-tier fair value hierarchy that gives the highest priority to quoted prices in active markets for identical assets or liabilities and the lowest priority to unobservable inputs. The fair value hierarchy is as follows:

Level 1 Inputs - Unadjusted quoted prices in active markets for identical assets or liabilities that the reporting entity has the ability to access at the measurement date.

Level 2 Inputs - Inputs other than quoted prices included in Level 1 that are observable for the asset or liability, either directly or indirectly. These include quoted prices for similar assets or liabilities in active markets, quoted prices for identical or similar assets or liabilities in markets that are not active, inputs other than quoted prices that are observable for the asset or liability (for example, interest rates, volatilities, prepayment speeds, loss severities, credit risks and default rates) or inputs that are derived principally from or corroborated by observable market data by correlation or other means.

Level 3 Inputs - Significant unobservable inputs that reflect an entity’s own assumptions that market participants would use in pricing the assets or liabilities.

As of December 31, 2017, we had short-term investments.  Trading securities held at December 31, 2017, were purchased on the open market and unrealized gains and losses are included in other income (expense). The trading securities are valued under the fair value hierarchy using Level 1 Inputs. Short-term investments of $4.6 million consist of investments such as time deposits, which are highly liquid with maturity dates greater than three months at the date of purchase. See Note 17 for additional information related to our interest rate swaps and foreign currency hedges.  Generally, we can access these investments in a relatively short amount of time but in doing so we generally forfeit a portion of earned and future interest income. The short-term investments are valued under the fair value hierarchy using Level 2 Inputs.

 

 

- 62 -

---

Financial assets and liabilities carried at fair value as of December 31, 2017 are classified in the following table:

 

Financial assets and liabilities carried at fair value as of December 31, 2016 are classified in the following table:

 

Certain financial assets and financial liabilities are measured at fair value on a non-recurring basis; that is, the instruments are not measured at fair value on an ongoing basis but are subject to fair value adjustments in certain circumstances (for example, when there is evidence of impairment). We believe our long-term debt under our revolving credit facility approximates fair value and is valued under the fair value hierarchy using Level 2 Inputs. Financial assets and financial liabilities measured at fair value on a non-recurring basis were not significant at December 31, 2017 and 2016.

We also are responsible for a pension plan in the U.K. that holds investments carried at fair value.  See Note 12 for additional information related to these pension plan investments.

 

 

Note 3 – Inventories

Inventories, stated at the lower of cost or market value, at December 31 were:

 

 

Note 4 – Property, Plant and Equipment

Property, plant and equipment at December 31 were:

 

Depreciation and amortization of property, plant and equipment was $76.9 million, $78.5 million and $71.5 million for the years ended December 31, 2017, 2016 and 2015, respectively.   We have capital lease obligations totaling approximately $1.0 million and $1.1 million and December 31, 2017 and 2016, respectively, included in other current liabilities and other long-term liabilities on the balance sheet.  

 

 

- 63 -

---

Note 5 – Intangible Assets

Intangible assets subject to amortization at December 31 were as follows:

 

 

Amortization expense related to intangible assets subject to amortization was $18.8 million, $20.5 million and $8.6 million for the years ended December 31, 2017, 2016 and 2015, respectively.

Amortization of intangible assets is as follows:

 

 

 

NOTE 6 – GOODWILL

Changes in goodwill for the years ended December 31 were as follows:

 

 

 

- 64 -

---

NOTE 7 – BANK CREDIT AGREEMENTS AND OTHER SHORT-TERM AND LONG-TERM DEBT  

Short-term debt

Our Asia subsidiaries maintain credit facilities with several financial institutions through our foreign entities worldwide totaling $80.5 million. Generally our foreign credit lines are unsecured, uncommitted and may be repayable on demand.  These credit facilities bear interest at LIBOR plus margin.  Interest payments are due quarterly on outstanding amounts under the credit lines. The unused and available credit under the various facilities as of December 31, 2017, was approximately $78.7 million, net of a $1.0 million advance under the foreign credit line and $0.9 million credit used for import and export guarantee.

Long-term debt

We currently have a U.S. banking credit facility (the “U.S. Credit Facility”) under which we may draw up to $250 million on a revolving basis, in addition to a $250 million term loan.  The U.S. Credit Facility matures October 26, 2021.  The term loan portion of the U.S. Credit Facility is repayable in part through quarterly installments that increase over time from $3.1 million per quarter in 2016 to $9.4 million per quarter in the final year of the U.S. Credit Facility. We may, from time to time, request increases in the aggregate commitments under the U.S. Credit Facility of up to $200 million, subject to the lenders electing to increase their commitments or by means of the addition of new lenders, and subject to at least half of each increase in aggregate commitments being in the form of term loans, with the remaining amount of each increase being an increase in the amount of the revolving portion of the U.S. Credit Facility.  The U.S. Credit Facility bears interest at LIBOR or similar indices plus a specified margin.  The U.S. Credit Facility contains certain financial and non-financial covenants, including, but not limited to, a maximum consolidated leverage ratio, a minimum consolidated fixed charge coverage ratio, and restrictions on liens, indebtedness, investments, fundamental changes, dispositions, and restricted payments (including dividends and share repurchases).  At December 31, 2017, we owed $268.8 million under the U.S. Credit Facility, $103.0 million of which was drawn under the revolving portion and $165.8 million of which was outstanding under the term loan. The obligations of the Borrowers under the U.S. Credit Facility are secured by substantially all of the assets of Diodes, including controlling interests in its first-tier subsidiaries, and by specified assets of certain of its subsidiaries.

Long-term debt balances as of December 31, consist of the following:

 

The table below sets forth the annual contractual maturities of long-term debt at December 31, 2017:

 

 

 

 

- 65 -

---

NOTE 8 – CAPITAL LEASE OBLIGATIONS

Future minimum lease payments under capital lease agreements are summarized as follows:

 

At December 31, 2017, property under capital leases had a cost of $3.7 million, and the related accumulated depreciation was $2.6 million. Depreciation of assets held under capital lease is included in depreciation expense.

 

 

NOTE 9 – ACCRUED LIABILITIES AND OTHER LONG-TERM LIABILITIES

Accrued liabilities and other current liabilities at December 31 were:

 

Other long-term liabilities at December 31 were:

 

 

NOTE 10 – STOCKHOLDERS’ EQUITY

We have never declared or paid cash dividends on our Common Stock. Our U.S. Credit Facility permits us to pay dividends up to $3.0 million per fiscal year to its stockholders so long as we have not defaulted at the time of such dividend and no default would result from declaring or paying such dividend. The payment of dividends is within the discretion of our Board of Directors. See Note 7 for additional information regarding our credit agreements.

During November 2015 the Company’s board of directors authorized a share repurchase plan to repurchase up to an aggregate of $100 million of the Company’s outstanding common stock, $0.66 2/3 par value per share.  The share repurchase program is expected to continue through the end of 2019 unless extended or shortened by the Board of Directors.  During 2017 the Company repurchased 300,000 of its common shares at a cost of $8.7 million and in 2016, the Company repurchased 691,196 of its common shares at a cost of $18.0 million. All purchases were made through open market transactions and were recorded as treasury stock.  

 

 

- 66 -

---

NOTE 11 – INCOME TAXES

 

Tax Cuts and Jobs Act

 

The Tax Act was enacted on December 22, 2017. The Tax Act reduces the U.S. federal corporate tax rate from 35% to 21%, requires companies to pay a one-time transition tax on earnings of certain foreign subsidiaries that were previously tax deferred, provides an exemption from U.S. federal tax for dividends received from foreign subsidiaries, and creates new taxes on certain foreign sourced earnings. As of the completion of these financial statements and related disclosures, we have not completed our accounting for the tax effects of the Tax Act; however, as described below, we have made a reasonable estimate of such effects and recorded a provisional tax expense of $45.9 million, which is included as a component of income tax expense from continuing operations in the fourth quarter of 2017.  This provisional tax expense incorporates assumptions made based upon the Company’s current interpretation of the Tax Act, and may change as we receive additional clarification and implementation guidance and as the interpretation of the Tax Act evolves. In accordance with SEC Staff Accounting Bulletin No. 118, the Company will finalize the accounting for the effects of the Tax Act no later than the fourth quarter of 2018.  Future adjustments made to the provisional effects will be reported as a component of income tax expense from continuing operations in the reporting period in which any such adjustments are determined.

 

 

The table below reflects the significant components of the provisional amount of tax expense recorded in the fourth quarter of 2017 and included as a component of income tax expense from continuing operations:

 

 

The Company expects to use net operating loss carryforwards and tax credits to completely offset any cash tax obligations resulting from the transition tax.  The other components shown above represent noncash adjustments to tax expense.  

 

Remeasurement of U.S. deferred tax assets and liabilities

 

We remeasured certain U.S. deferred tax assets and liabilities using the lower corporate income tax rate of 21%. However, we are still analyzing certain aspects of the Tax Act and refining our calculations, which could potentially affect the measurement of these deferred tax balances.

Transition tax on foreign earnings

The one-time transition tax is based on our total post-1986 earnings and profits (E&P) that we previously deferred from U.S. income taxes, and is net of indirect effects of unrecognized tax benefits. We have not yet completed our calculation of the total post-1986 E&P for the majority of our foreign subsidiaries. Further, the transition tax is based in part on the amount of those earnings held in cash and other specified assets. This amount may change when we finalize the calculation of post-1986 foreign E&P previously deferred from U.S. federal taxation and finalize the amounts held in cash or other specified assets.

No additional income taxes have been provided for any remaining undistributed foreign earnings not subject to the transition tax, or any additional outside basis difference inherent in these entities.  Our undistributed foreign earnings, including those subject to the transition tax, continue to be indefinitely reinvested in foreign operations, with limited exceptions related to earnings of European subsidiaries. Determining the amount of unrecognized deferred tax liability related to any remaining undistributed foreign earnings not subject to the transition tax and additional outside basis difference in these entities (i.e., basis difference in excess of that subject to the one-time transition tax) is not practicable.  We continue to evaluate the potential effects the Tax Act may have on our long term plans for capital investment across the geographies in which we operate.

Foreign tax credits used to offset transition tax

The Company is able to claim foreign tax credits against the incremental U.S. tax due on its previously deferred foreign earnings.  However, we have not yet completed our calculation of the total amount of foreign taxes previously paid or accrued by the majority of our foreign subsidiaries that may be creditable against the transition tax.  We expect these tax credits to generally be available to offset any cash tax liability resulting from the transition tax.  

 

- 67 -

---

Other adjustments

We have not yet completed our analysis of the direct and indirect implications of the Tax Act on the Company’s tax attributes, such as tax credit carryforwards.  Included in the provisional tax expense is the estimated effect of our change in judgment regarding realizability of foreign tax credits and R&D credits.            

 

The components of the income tax provision (benefit) are as follows for the years ended December 31:

 

Effective Tax Rate Reconciliation

Reconciliation between the effective tax rate and the statutory tax rates for the years ended December 31, 2017, 2016, and 2015 is as follows:

 

 

- 68 -

---

Uncertain Tax Positions

In accordance with the provisions related to accounting for uncertainty in income taxes, we recognize the benefit of a tax position if the position is “more likely than not” to prevail upon examination by the relevant tax authority. A reconciliation of the beginning and ending amount of unrecognized tax benefits is as follows:

 

If the $30.6 million of unrecognized tax benefits as of December 31, 2017 is recognized, approximately $27.2 million would affect the effective tax rate.   It is reasonably possible that the amount of the unrecognized benefit with respect to certain of our unrecognized tax positions will significantly increase or decrease within the next 12 months. These changes may be the result of settlements of ongoing audits or competent authority proceedings. At this time, an estimate of the range of the reasonably possible outcomes cannot be made.

We file income tax returns in the U.S. federal jurisdiction and in various state and foreign jurisdictions. We are no longer subject to U.S. federal income tax examinations by tax authorities for tax years before 2008, or for the 2010 and 2011 tax years.  We are no longer subject to China income tax examinations by tax authorities for tax years before 2007.  With respect to state and local jurisdictions and countries outside of the U.S., with limited exceptions, we are no longer subject to income tax audits for years before 2012. Although the outcome of tax audits is always uncertain, we believe that adequate amounts of tax, interest and penalties, if any, have been provided for in our reserve for any adjustments that may result from future tax audits. We recognize accrued interest and penalties, if any, related to unrecognized tax benefits in interest expense. We had an immaterial amount of accrued interest and penalties at December 31, 2017, 2016 and 2015.

Deferred Taxes

The table below sets forth our deferred tax assets and liabilities as of December 31, 2017 and 2016:

 

We prospectively adopted ASU No. 2013-11, Presentation of an Unrecognized Tax Benefit When a Net Operating Loss Carryforward, a Similar Tax Loss, or a Tax Credit Carryforward Exists, (“ASU 2013-11”) effective in the first quarter of 2014.  ASU No. 2013-11 provides that an entity is required to present an unrecognized tax benefit, or a portion of an unrecognized tax benefit, in the financial statements as a reduction to a deferred tax asset for a net operating loss carryforward, a similar tax loss, or a tax credit carryforward.  The $15.4 million net deferred tax assets presented in the balance sheet as of December 31, 2017, is net of $3.2 million of unrecognized tax benefits.  The $27.8 million net deferred tax asset presented on the balance sheet as of December 31, 2016, is net of $13.6 million of unrecognized tax benefits.  The $41.4 million net deferred tax asset presented above is prior to the net balance sheet presentation required by ASU 2013-11.  

- 69 -

---

 We adopted ASU No. 2016-09, Compensation—Stock Compensation (Topic 718) Improvements to Employee Share-Based Payment Accounting, (“ASU 2016-09”) effective in the first quarter of 2017.  The effect of the adoption related to the income tax components of ASU 2016-09 was an increase of $4.8 million to retained earnings and to deferred income tax assets, to record the tax benefit of the net operating loss carryforward resulting from excess tax deductions related to stock based compensation.  ASU 2016-09 requires that the tax effects of differences between cumulative compensation expense recorded for financial statement purposes and available income tax deductions be recorded to income tax expense.  We recorded a $1.5 million increase to income tax expense as a result of the application of ASU 2016-09 to stock based compensation vesting and exercise events that occurred during 2017.  

At December 31, 2017, we had federal tax credit and research credit carryforwards of approximately $20 million and $7 million, respectively, which are available to offset future income tax liabilities. The federal tax credit carryforwards begin to expire in 2021 and the state tax credit carryforwards will begin to expire in 2020. We determined that it is more likely than not that a portion of our federal and state research credit carryforwards will expire before they are utilized. The valuation allowances recorded against the related deferred tax assets totaled $13 million and $22.4 million as of December 31, 2017 and 2016, respectively.

At December 31, 2017, we had state net operating loss (“NOL”) carryforwards of approximately $3 million, and foreign NOL carryforwards of $2 million which are available to offset future taxable income. The U.S. state NOL carryforwards will begin to expire in 2018. We determined that it is more likely than not that the U.S. state NOL carryforwards will expire before they are fully utilized and recorded a full valuation allowance on the related deferred tax assets. The foreign NOL carryforwards will begin to expire in 2020. We determined that it is more likely than not that a portion of the foreign NOL carryforwards will expire before they are fully utilized.  The valuation allowances recorded against the related deferred tax assets totaled $5 million and $5.9 million as of December 31, 2017 and 2016, respectively.  

Supplemental Information

Our undistributed foreign earnings continue to be indefinitely reinvested in foreign operations, with limited exceptions related to earnings of European subsidiaries. As of December 31, 2017, we had undistributed earnings from non-U.S. operations of approximately $770 million (including approximately $51 million of restricted earnings, which are not available for dividends). Undistributed earnings of our China subsidiaries comprise $429 million of this total.  Additional Chinese withholding taxes of approximately $42 million would be required should the $429 million of such earnings be distributed out of China as dividends.

The impact of tax holidays decreased our tax expense by approximately $3.7 million, $7.3 million and $2.9 million for the years ended December 31, 2017, 2016 and 2015, respectively. The benefit of the tax holidays on basic and diluted earnings per share was $0.08, $0.15 and $0.06 for the twelve months ended December 31, 2017, 2016 and 2015, respectively.                     

 

 

NOTE 12 – EMPLOYEE BENEFIT PLANS

Defined Benefit Plan

In connection with the Zetex acquisition, we adopted a contributory defined benefit plan that covers certain employees in the U.K. The defined benefit plan is closed to new entrants and frozen with respect to future benefit accruals. The retirement benefit is based on the final average compensation and service of each eligible employee. We determined the fair value of the defined benefit plan assets and utilize an annual measurement date of December 31. At subsequent measurement dates, defined benefit plan assets will be determined based on fair value. Defined benefit plan assets consist of a diverse range of listed and unlisted securities including corporate bonds and mutual funds and are denominated in the currency in which the benefits will be paid and that have terms to maturity approximating the terms of the related pension liability. The net pension and supplemental retirement benefit obligations and the related periodic costs are based on, among other things, assumptions of the discount rate, estimated return on plan assets and mortality rates. These obligations and related periodic costs are measured using actuarial techniques and assumptions. The projected unit credit method is the actuarial cost method used to compute the pension liabilities and related expenses.  All unrecognized actuarial gains and losses, prior service costs and accumulated other comprehensive income are eliminated and the balance sheet liability is set equal to the funded status of the defined benefit plan at acquisition date.

- 70 -

---

The table below sets forth net periodic benefit costs of the plan for the years ended December 31, 2017 and 2016:

 

The table below sets forth the benefit obligation, the fair value of plan assets, and the funded status as of December 31:

 

Based on an actuarial study performed as of December 31, 2017, the plan is underfunded by approximately $31.8 million and the liability is reflected in our consolidated balance sheets as a noncurrent liability and the amount recognized in accumulated other comprehensive loss was approximately $44.0 million.  

We apply the “10% corridor” approach to amortize unrecognized actuarial gains (losses). Under this approach, only actuarial gains (losses) that exceed 10% of the greater of the projected benefit obligation or the market-related value of the plan assets are amortized. For the twelve months ended December 31, 2017, the plan’s total recognized loss increased by approximately $4.8 million. The variance between the actual and expected return to plan assets during 2017 decreased the total unrecognized net loss by approximately $1.1 million. The total unrecognized net loss is more than 10% of the projected benefit obligation and 10% of the plan assets.  Therefore, the excess amount will be amortized over the average term to retirement of plan participants not yet in receipt of pension, which as of December 31, 2017 the average term was approximately 13 years. The following weighted-average assumptions were used to determine net periodic benefit costs for the twelve months ended December 31:

 

The following weighted-average assumption was used to determine the benefit obligations at December 31:

- 71 -

---

 

The expected long-term return on plan assets was determined based on historical and expected future returns of the various asset classes. The plan’s investment policy includes a mandate to diversify assets and invest in a variety of asset classes to achieve its expected long-term return and is currently invested in a variety of funds representing most standard equity and debt security classes. Trustees of the plan may make changes at any time. The table below sets forth the plan asset allocations of the assets in the plan and expected long-term return by asset category:

 

Benefit plan payments are primarily made from funded benefit plan trusts and current assets. The table below sets forth the expected future benefit payments, including future benefit accrual, as of December 31, 2017:

 

We adopted a payment plan with the trustees of the defined benefit plan, in which we would make annual contributions each year through 2030, of approximately GBP 2 million (approximately $2.8 million based on a GBP:USD exchange rate of 1.4).  The annual contributions were expected to meet the deficit disclosed in the plan as of April 5, 2013 by December 31, 2030.  The trustees are required to review the funding position every three years, and a further review was carried out as of April 5, 2016. The outcome of the review, as agreed with the trustees during the first quarter of 2017, was that contributions would continue at the existing level until December 31, 2029.       

Our overall defined benefit plan investment strategy is to achieve a mix of investments for long-term growth and for near-term benefit payments with a wide diversification of asset types and fund strategies. The target allocations for plan assets are 48% equity securities, 40% corporate bonds and government securities, and 12% to absolute return funds. Equity securities primarily include investments in large-cap and mid-cap companies primarily located in the U.K. Fixed income securities include corporate bonds of companies from diversified industries, and U.K. government bonds. The absolute return fund is mainly invested in a mixture of equities and bonds.

The plan’s trustees appoint fund managers to carry out all the day-to-day functions relating to the management of the fund and its administration. The fund managers must invest their portion of the plan’s assets in accordance with their investment manager agreement agreed by the trustees. The trustees are responsible for agreeing these investment manager agreements and for deciding on the portion of the plan’s assets that will be invested with each fund manager. When making decisions, the trustees take advice from experts including the plan’s actuary and also have the option to consult with the Company.

- 72 -

---

The following table summarizes the major categories of the plan assets:

 

Fair value is taken to mean the bid value of securities, as supplied by the fund managers. All the plan’s securities are publically traded and highly liquid. The plan does not hold any Level 3 securities. See Note 2 for additional information regarding fair value and Levels 1, 2 and 3.

The investment manager agreements require the fund managers to invest in a diverse range of stocks and bonds across each particular asset class. The stocks held by the plan in a particular asset class should therefore match closely the underlying stocks in the relevant index. We believe that this leads to minimal concentration of risk within each asset class; although we recognize that some asset classes are inherently more risky than others.

We also have pension plans in Asia for which the benefit obligation, fair value of the plan assets and the funded status amounts are immaterial and therefore, not included in the amounts or assumptions above.

401(k) Retirement Plan

We maintain a 401(k) retirement plan (“the Plan”) for the benefit of qualified employees at our U.S. locations. Employees who participate may elect to make salary deferral contributions to the Plan up to 100% of the employees’ eligible payroll subject to annual Internal Revenue Code maximum limitations. We currently make a matching contribution of $1 for every $2 contributed by the participant up to 6% (3% maximum matching) of the participant’s eligible payroll, which vests over an initial four years. In addition, we may make a discretionary contribution to the entire qualified employee pool, in accordance with the Plan.

As stipulated by the regulations of China, we maintain a retirement plan pursuant to the local municipal government for the employees in China. We are required to make contributions to the retirement plan at a rate between 10% and 22% of the employee’s eligible payroll. Pursuant to the Taiwan Labor Standard Law and Factory Law, we maintain a retirement plan for the employees in Taiwan, whereby we make contributions at a rate of 6% of the employee’s eligible payroll.

For the years ended December 31, 2017, 2016 and 2015, total amounts expensed under these plans were approximately $14.8 million, $13.9 million and $14.0 million, respectively.

Deferred Compensation Plan

We maintain a Non-Qualified Deferred Compensation Plan (the “Deferred Compensation Plan”) for executive officers, key employees and members of the Board of Directors (the “Board”). The Deferred Compensation Plan allows eligible participants to defer the receipt of eligible compensation, including equity awards, until designated future dates. We offset our obligations under the Deferred Compensation Plan by investing in the actual underlying investments. These investments are classified as trading securities

- 73 -

---

and are carried at fair value. At December 31, 2017, these investments totaled approximately $8.8 million. All gains and losses in these investments are materially offset by corresponding gains and losses in the deferred compensation plan liabilities.  

 

 

NOTE 13 - SHARE-BASED COMPENSATION

The table below sets forth the line items where share-based compensation expense was recorded for the twelve months ended December 31, 2017, 2016 and 2015:

 

The table below sets forth share-based compensation expense by type for the twelve months ended December 31, 2017, 2016 and 2015:

 

In 2016, we recorded a $2.7 million reversal decrease of previously recorded expense related to performance grants. In 2015, we recorded $4.0 million in restricted stock expense related to Diodes restricted stock grants issued as replacement for unvested Pericom employee awards outstanding at the date of the acquisition. 

In May 2013, our stockholders approved our 2013 Equity Incentive Plan (“2013 Plan”). Since the approval of the 2013 Plan, all stock options are granted under the 2013 Plan, and we will not grant any further stock options under our 2001 Plan. Stock options under the 2013 Plan generally vest in equal annual installments over a four-year period and expire eight years after the grant date. The number of shares originally authorized to be awarded under the 2013 Plan was 6 million shares. In May 2017, our stockholders approved an amendment to the 2013 Plan, authorizing and additional 6 million shares to be awarded, bringing the total shares authorized to be awarded under the 2013 Plan to 12 million shares.  

Share-based compensation expense for stock options granted in previous years was calculated on the date of grant using the Black-Scholes-Merton option-pricing model.  No stock options were granted in any of the periods presented.

Total cash received from option exercises was approximately $13.6 million, $0.1 million and $10.2 million during 2017, 2016 and 2015, respectively.

At December 31, 2017, unrecognized compensation expense related to unvested options, net of estimated forfeitures, was approximately $0.3 million. The weighted average period over which share-based compensation expense related to these options will be recognized is less than 1 year.

- 74 -

---

The table below sets forth a summary of activity in our stock option plans:

 

      

The table below sets forth information about stock options outstanding at December 31, 2017:

 

 Share Grants—Restricted stock awards and restricted stock units generally vest in equal annual installments over a four-year period. Since the approval of the 2013 Plan, all new grants are granted under the 2013 Plan, and we will not grant any further grants under our 2001 Plan.

The table below sets forth a summary of our non-vested share grants in 2017, 2016 and 2015:

 

- 75 -

---

During 2017 the Company modified a performance-based award previously granted to our Chief Executive Officer.  The effect was to replace a performance-based grant covering 700,000 shares of the Company’s common stock with a performance-based grant covering 62,905 shares of the Company’s common stock and a restricted stock grant covering 62,905 of the Company’s common stock.  If certain performance criteria are met for the performance-based grant, Dr. Lu will receive 200% of that award or 125,810 shares.  The incremental expense if Dr. Lu received 200% of the performance-based grant award is approximately $3.3 million.  The incremental expense of the restricted stock grant is approximately $1.7 million.           

Included in the restricted stock grant for 2015 were 724,000 shares granted to Pericom employees. During 2016, the Company paid $2.5 million in taxes related to the net share settlement on shares of stock that vested for Pericom employees.   .

The total unrecognized share-based compensation expense as of December 31, 2017 was approximately $32.4 million, relating to restricted stock awards, which was expected to be recognized over a weighted average period of approximately 2.4 years.

Our Chief Executive Officer has a grant of 600,000 performance-based stock units that vest upon the Company reaching $1.0 billion in revenue.  Based on the Company reaching approximately $1.1 billion in revenue in 2017, our Chief Executive Officer’s grant of 600,000 performance-based stock units will be released to the Chief Executive Officer, upon filing of the Company’s Annual Report on Form 10-K, in February 2018.  The expense related to the 600,000 performance-based units was all recognized in previous periods.

 

 

NOTE 14 – RELATED PARTY TRANSACTIONS

We conduct business with a related party company, Lite-On Semiconductor Corporation, and its subsidiaries and affiliates (“LSC”), and Nuvoton Technology Corporation and its subsidiaries and affiliates (collectively, “Nuvoton”). LSC is our largest stockholder, owning approximately 16% of our outstanding Common Stock as of December 31, 2017, and is a member of the Lite-On Group of companies. We sold products to LSC totaling less than 1% of our net sales for the years ended December 31, 2017, 2016 and 2015, respectively.  Raymond Soong, the Chairman of the Board of Directors, is the Chairman of LSC, and is the Chairman of Lite-On Technology Corporation (“LTC”), a significant shareholder of LSC. C.H. Chen, our former President and Chief Executive Officer and currently the Vice Chairman of the Board of Directors, is also Vice Chairman of LSC and a board member of LTC. Dr. Keh-Shew Lu, our President and Chief Executive Officer and a member of our Board of Directors, is a board member of LTC, and a board member of Nuvoton. L.P. Hsu, a former member of our Board of Directors serves as a consultant to LTC, and is a supervisor of the board of Nuvoton. We consider our relationships with LSC, a member of the Lite-On Group of companies, and Nuvoton to be mutually beneficial and we plan to continue our strategic alliance with LSC and Nuvoton.  We purchase wafers from Nuvoton for use in our production process.

We also conduct business with Keylink International (B.V.I.) Inc. and its subsidiaries and affiliates (“Keylink”). Keylink is our 5% partner in our Shanghai assembly and test facilities.   We sell products to, and purchase inventory from, companies owned by Keylink. We sold products to companies owned by Keylink, totaling approximately 1% of net sales for each of the years ended December 31, 2017, 2016 and 2015. In addition, our subsidiaries in China lease their manufacturing facilities in Shanghai from, and subcontract a portion of our manufacturing process (metal plating and environmental services) to, Keylink. We also pay a consulting fee to Keylink. The aggregate amounts paid to Keylink for the years ended December 31, 2017, 2016 and 2015 were approximately $17.1 million, $16.1 million and $17.9 million, respectively.   In addition, Chengdu Ya Guang Electronic Company Limited (“Ya Guang”) is our 2% partner in one of our Chengdu assembly and test facilities and our 5% partner in our two Chengdu assembly and test facilities; however, we have no material transactions with Ya Guang.  We also purchase materials from Jiyuan Crystal Photoelectric Frequency Technology Ltd. (“JCP”) an FCP manufacturing company in which we have made an equity investment and account for using the equity method of accounting.

The Audit Committee of the Board reviews all related party transactions for potential conflict of interest situations on an ongoing basis, all in accordance with such procedures as the Audit Committee may adopt from time to time.

- 76 -

---

 

The table below sets forth net sales and purchases from related parties for the twelve months ended December 31:

 

 

The table below sets forth accounts receivable from and accounts payable to related parties at December 31:

 

 

- 77 -

---

NOTE 15 – SEGMENT INFORMATION AND ENTERPRISE-WIDE DISCLOSURES

An operating segment is defined as a component of an enterprise about which separate financial information is available that is evaluated regularly by the chief decision maker, or decision-making group, in deciding how to allocate resources and in assessing performance. Our chief operating decision maker is our CEO. For financial reporting purposes, we operate in a single segment, standard semiconductor products, through our various manufacturing and distribution facilities.

Our primary operations include the operations in Asia, North America and Europe. The table below sets forth net sales by geographic areas based on the location of subsidiaries producing the net sales:

The accounting policies of the operating entities are the same as those described in the summary of significant accounting policies.

 

- 78 -

---

The table below sets forth net sales by country.  We report net sales based on “shipped to” customer locations as we believe this best represents where our customers’ business activities occur. “All others” represents countries with less than 3% of total net sales each.

 

Major customers – One customer accounted for 10% or more of our net sales in 2017, but not 10% of our outstanding accounts receivable at December 31, 2017.  No customers accounted for 10% or more of our net sales in 2016 or 2015.

 

NOTE 16 – COMMITMENTS AND CONTINGENCIES

Operating leases – We lease offices, manufacturing plants, equipment, vehicles and warehouses under operating lease agreements expiring through December 2024. Rental expense amounted to approximately $10.4 million, $10.5 million and $10.1 million for the years ended December 31, 2017, 2016 and 2015, respectively.  We do not have purchase options related to the operating lease agreements. The table below sets forth the approximate amount for future minimum lease payments under non-cancelable operating leases at December 31, 2017:

 

 

- 79 -

---

In addition, we have the following land right leases.    None of the leases requires a rental payment.

 

 

Purchase commitments – We have entered into non-cancelable purchase contracts for capital expenditures, primarily for manufacturing equipment, for approximately $23.5 million at December 31, 2017.  In addition to these purchase commitments, we have equity investment obligations for our Chengdu facilities of $50 million, $25 million and $25 million for 2018, 2019 and 2020, respectively, and capital investment obligations of $62 million, $25 million and $29 million for 2018, 2019 and 2020, respectively.

Contingencies - From time to time, we are involved in various legal proceedings that arise in the normal course of business. While we intend to defend any lawsuit vigorously, we presently believe that the ultimate outcome of any current pending legal proceeding will not have any material adverse effect on our financial position, cash flows or operating results. However, litigation is subject to inherent uncertainties, and unfavorable rulings could occur. An unfavorable ruling could include monetary damages, which could impact on our business and operating results for the period in which the ruling occurs or future periods.  Based on information available, we evaluate the likelihood of potential outcomes. We record the appropriate liability when the amount is deemed probable and reasonably estimable. In addition, we do not accrue for estimated legal fees and other directly related costs as they are expensed as incurred.  The Company is not currently a party to any pending litigation that the Company considers material.

  

 

NOTE 17 – DERIVATIVE FINANCIAL INSTRUMENTS

 

In accordance with ASC 815 we recognize derivative instruments on our balance sheet, and we measure them at fair value. The accounting for changes in the fair value of derivatives depends on the intended use of the derivative, whether we have elected to designate the derivative as being in a hedging relationship, and whether the hedging relationship has satisfied the criteria necessary to apply hedge accounting. Derivative instruments that are designated, and qualify as hedges of the exposure to changes in the fair value are considered fair value hedges. Derivative instruments that are designated, and qualify as hedges of the exposure to variability in expected future cash flows are considered cash flow hedges. Derivative instruments may also be designated as hedges of the foreign currency exposure of a net investment in a foreign operation. We currently only utilize cash flow hedges and do not use derivatives for trading or speculative purposes.                  

 

Hedge accounting generally provides for the matching of the timing of gain or loss recognition on the hedging instrument with the recognition of the changes in the fair value of the hedged asset or liability that are attributable to the hedged risk in a fair value hedge, or the earnings effect of the hedged forecasted transactions in a cash flow hedge. We may enter into derivative contracts that are intended to economically hedge certain risks, even though we elect not to apply hedge accounting under ASC 815. Changes in the fair value of derivatives not designated in hedging relationships are recorded directly in the consolidated statements of income. Specific information about the valuations of derivatives is described in Note 1 and classification of derivatives in the fair value hierarchy is described in Note 2.  Currently our interest rate swaps and interest rate collars are designated as hedges while our foreign exchange contracts are not designated as hedges.

 

The effective portion of changes in the fair value of derivatives designated and qualifying as cash flow hedges is recorded in accumulated other comprehensive loss and is subsequently reclassified into earnings in the period in which the hedged forecasted transaction affects earnings.

 

Certain of the Company's agreements with its derivative counterparties contain provisions where if certain merger activity, a change of control, or a capital structure change occurs that materially changes the Company's creditworthiness in an adverse manner, the Company’s counterparty may have the right to terminate any derivative transactions under such agreement.

 

The company has agreements with each of its derivative counterparties that contain a provision where the Company could be declared in default on its derivative obligations if repayment of the underlying indebtedness is accelerated by the lender due to the Company's default on the indebtedness.

Hedges of Foreign Currency Risk

We are exposed to fluctuations in various foreign currencies against our different functional currencies. We use foreign currency forward agreements to manage this exposure. At December 31, 2017 we had outstanding foreign currency forward contracts that are

- 80 -

---

intended to preserve the economic value of foreign currency denominated monetary assets and liabilities; these instruments are not designated for hedge accounting treatment in accordance with ASC 815.  There is no fair value of our foreign exchange hedges, therefore they are not recorded in our Consolidated Balance Sheets.  As of December 31, 2017 and 2016 the total notional amounts of these foreign exchange contracts was $87.6 million and zero, respectively.

The table below sets forth outstanding foreign currency forward contracts at December 31, 2017:

Hedges of Interest Rate Risk

The Company’s objectives in using interest rate derivatives are to add stability to interest expense and to manage its exposure to interest rate movements. To accomplish this objective, the Company primarily uses interest rate swaps, including interest rate collars, as part of its interest rate risk management strategy.  Interest rate swaps designated as cash flow hedges involve the receipt of variable amounts from a counterparty in exchange for the Company making fixed-rate payments over the life of the agreements without exchange of the underlying notional amount.

The table below sets forth information related to the number of and the notional amount of our interest rate related derivative instruments at December 31 2017 and December 31, 2016:

The table below sets forth the fair value of the Company’s interest rate related derivative financial instruments as well as their classification on the Consolidated Balance Sheets as of December 31, 2017 and December 31, 2016:

 

The tables below sets forth the effect of the Company’s derivative financial instruments on the Consolidated Statements of Income for the years ended December 31, 2017 and 2016:  

 

We estimate that $0.5 million of net derivative gains included in AOCI as of December 31, 2017 will be reclassified into earnings within the following 12 months. No gains or losses were reclassified from AOCI into earnings as a result of forecasted transactions that failed to occur during fiscal year 2017.

 

- 81 -

---

 

There was no effect from derivative financial instruments on the Company’s Consolidated Statements of Operations for the twelve months ended December 31, 2015.

 

At December 31, 2017 and 2016, the fair value of derivatives in a net asset position, which includes accrued interest but excludes any adjustments for nonperformance risk, related to these agreements was $3.9 million and $2.3 million, respectively.  As of December 31, 2017 and 2016, the Company had not posted any collateral related to these agreements.

 

NOTE 18 – RESTRUCTURING COSTS

In February 2017, the Company announced its plan to transfer its wafer fabrication operation at KFAB to other Company-owned wafer fabrication plants and external foundries. The Company ceased production operations at KFAB late in third quarter 2017 and vacated and returned the premises in November 2017. Employees were provided retention and standard severance packages.  During 2017 the Company received $6.5 million of insurance proceeds as a result of the fires sustained at the KFAB facility during 2016 of which $4.5 million is recorded in Cost of Goods Sold and $2.0 million is recorded in Other Income.  There are outstanding insurance claims.  Also during 2017, the Company recorded $1.9 million of asset impairment related to the shut-down of KFAB.

The table below sets forth the restructuring costs, recorded in restructuring expense in the Condensed Consolidated Statements of Operations, incurred during the twelve months ended December 31, 2017:

 

 

The table below sets forth the costs accrued related to the KFAB restructuring:

 

 

The Company will pay out the remaining accrued costs during the first quarter of 2018.

 

Based on continued negotiations with the landlord, we recorded an additional $1.4 million of asset retirement obligations related the KFAB restructuring.  This asset retirement obligation is for the estimated amounts to be paid to contractors to remediate the KFAB facility upon vacating the property.   The table below sets forth the asset retirement obligation related to the KFAB restructuring:

 

 

In connection with the asset retirement obligation, the Company recorded amortization expense of the offsetting asset of $1.4 million for the twelve months ended December 31, 2017.   

 

- 82 -

---

NOTE 19 – BUSINESS COMBINATION

Pericom Semiconductor Corporation

On November 24, 2015, we completed our acquisition of Pericom Semiconductor Corporation (“Pericom”) pursuant to the Agreement and Plan of Merger dated as of September 2, 2015 (the “Merger Agreement”), as amended on November 6, 2015, by Amendment No. 1 (the “Merger Agreement Amendment”).  Under the Merger Agreement and the Merger Agreement Amendment and in accordance with the General Corporation Law of the State of California (1) PSI Merger Sub, Inc., a California corporation and wholly-owned subsidiary of the Company, was merged with and into Pericom, with Pericom continuing as the surviving corporation and a wholly-owned subsidiary of the Company, and (2) each outstanding share of common stock, without par value, of Pericom (other than shares owned by Pericom or certain of its affiliates or shares held by Pericom shareholders who have perfected their appraisal rights in accordance with applicable California law) was automatically converted into the right to  receive $17.75 in cash per share, without interest.  The aggregate consideration was approximately $403.2 million including the value of Pericom equity awards paid out or converted to Diodes equity awards pursuant to the Merger Agreement and Merger Agreement Amendment.  

The table below sets forth the estimated purchase price and related costs for Pericom:

 

 

The results of operations of Pericom are included in our consolidated financial statements from November 24, 2015.  The consolidated revenue and earnings of Pericom included in our consolidated financial statements for the twelve months ended December 31, 2015 was approximately $14.6 million and $(1.0) million, respectively, which include acquisition accounting adjustments.  The purpose of the acquisition was to further our strategy of expanding market and growth opportunities through selected strategic acquisitions.

The table below sets for the unaudited pro forma consolidated results of operations for the twelve month ended December 31, 2015 as if the acquisition of Pericom had occurred at January 1, 2014:

The unaudited pro forma consolidated results of operations do not purport to be indicative of the results that would have been obtained if the above acquisition had actually occurred as of the dates indicated or of those results that may be obtained in the future. The unaudited proforma consolidated results for December 31, 2015, exclude $10.0 million of acquisition related costs and $8.0 million of costs from Diodes restricted stock grants and change-in-control agreements for Pericom employees, and include additional amortization and depreciation of $12.0 million, additional interest expense of $11.0 million and additional income tax expense of $1.0 million. These unaudited pro forma consolidated results of operations were derived, in part, from the historical consolidated financial statements of Pericom and other available information and assumptions believed to be reasonable under the circumstances.  Pericom will be conformed to Diodes’ reporting calendar.  

 

- 83 -

---

NOTE 20 – SELECTED QUARTERLY FINANCIAL DATA (Unaudited)

 

Note: The sum of the quarterly earnings per share may not equal the full year amount, as the computations of the weighted average number of common shares outstanding for each quarter and for the full year are performed independently.

 

 

- 84 -

---

 

INDEX TO EXHIBITS

 

 

- 85 -

---

- 86 -

---

- 87 -

---

- 88 -

---

- 89 -

---

- 90 -

---

- 91 -

---

- 92 -

---

PLEASE NOTE: It is inappropriate for investors to assume the accuracy of any covenants, representations or warranties that may be contained in agreements or other documents filed as exhibits to this Annual Report on Form 10-K. In certain instances the disclosure schedules to such agreements or documents contain information that modifies, qualifies and creates exceptions to the representations, warranties and covenants. Moreover, some of the representations and warranties may not be complete or accurate as of a particular date because they are subject to a contractual standard of materiality that is different from those generally applicable to stockholders or were used for the purpose of allocating risk among the parties rather than establishing certain matters as facts. Accordingly, you should not rely on the representations and warranties as characterizations of the actual state of facts at the time they were made or otherwise.

 

 

- 93 -

---

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

KNOW ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below hereby constitutes and appoints Dr. Keh-Shew Lu, President and Chief Executive Officer, and Richard D. White, Chief Financial Officer and Secretary, his true and lawful attorneys-in-fact and agents, with full power of substitution, to sign and execute on behalf of the undersigned any and all amendments to this report, and to perform any acts necessary in order to file the same, with all exhibits thereto and other documents in connection therewith with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents full power and authority to do and perform each and every act and thing requested and necessary to be done in connection therewith, as fully to all intents and purposes as he might or could do in person, hereby ratifying and confirming all that said attorney-in-fact and agents, or their or his or her substitutes, shall do or cause to be done by virtue hereof.

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities indicated on February 19, 2018.

 

 

 

- 94 -