SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 6-K
Report of Foreign Private Issuer
Pursuant to Rule 13a-16 or 15d-16 of
the Securities Exchange Act of 1934
For the month of August, 2004
Commission File Number 001-31704
FNX MINING COMPANY INC.
(Registrant's name)
55 University Avenue
Suite 700
Toronto, Ontario
M5J 2H7 Canada
(Address of principal executive offices)
Indicate by check mark whether the registrant files or will file annual reports under cover Form 20-F or Form 40F.
Form 20-F |
Form 40-F |
X |
Indicate by check mark if the registrant is submitting the Form 6-K in paper as permitted by Regulation S-T Rule 101(b)(1):
Indicate by check mark if the registrant is submitting the Form 6-K in paper as permitted by Regulation S-T Rule 101(b)(7):
Indicate by check mark whether by furnishing the information contained in this Form, the registrant is also thereby furnishing the information to the Commission pursuant to Rule 12g3-2(b) under the Securities Exchange Act of 1934.
Yes |
No |
X |
If "Yes" is marked, indicate below the file number assigned to the registrant in connection with Rule 12g3-2(b) : 82-_______________
Documents Included as Part of this Report
No.
Document
1
News Release on Levack #2 Shaft reconditioning and results of drilling on the 1300 Deposit dated August 17, 2004
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the under-signed, thereunto duly authorized.
Date: August 17, 2004
FNX MINING COMPANY INC.
By: /s/ DAVE CONSTABLE
Dave Constable
Vice President
$8.0 Million Reconditioning of Levack #2 Shaft to Proceed
Drilling at Levack Mine Expands 1300 Deposit
TORONTO, ONTARIO August 17, 2004. FNX Mining Company Inc. (FNX-TSX/AMEX) and Dynatec Corporation (DY-TSX), the Sudbury Joint Venture partners (SJV) announce that, in anticipation of a positive production decision at Levack, an $8.0 million reconditioning program for the Levack #2 Shaft and headframe has been approved by the SJV and is scheduled to commence later this summer upon receipt of all required permits and approvals. It is anticipated that upon completion of this reconditioning program and Phase 2 mine development, all ore from the lower McCreedy West and Levack Mine Complex will be brought to surface through the Levack #2 Shaft.
The SJV also reports that recent results from the on-going drill program in support of the feasibility study to reopen the Levack Mine property continue to confirm and expand the mineralization in the 1300 Deposit.
On September 4, 2003, the Sudbury Joint Venture reported a mineral resource for the Levack Mine property of 5.1 million tons grading 1.9% Ni and 0.9% Cu in the measured and indicated categories with a further 0.98 million tons grading 2.0% Ni and 0.9% Cu in the inferred category (independently audited by Roscoe Postle Associates).
The 1300 Deposit (Figure 1) is included in the Levack resource estimates and contains a previously published inferred resource of 349,000 tons grading 1.91% Ni and 0.68% Cu (news release dated September 4, 2003). The deposit consists of nickel-rich contact-type mineralization and is readily accessible and well located between the previously mined Levack Main Orebody and the Levack #1 Orebody. A revised resource estimate for the 1300 Deposit will be issued after the current drill program is completed later this year.
HIGHLIGHTS
Feet | % | % | |||
Borehole | From | To | Length | Ni | Cu |
FNX7003 | 834.5 | 852.5 | 18.0 | 2.2 | 0.4 |
FNX7004 | 762.7 | 865.0 | 102.3 | 2.6 | 0.5 |
incl | 771.5 | 826.9 | 55.4 | 3.9 | 0.6 |
FNX7007 | 747.0 | 768.6 | 21.6 | 1.9 | 0.7 |
incl | 757.4 | 768.6 | 11.2 | 2.8 | 0.8 |
FNX7008 | 802.1 | 818.3 | 16.2 | 2.1 | 1.0 |
FNX2039 | 1473.4 | 1493.6 | 20.2 | 2.2 | 0.7 |
FNX2042 | 1472.9 | 1494.7 | 21.8 | 1.6 | 0.3 |
FNX2047 | 1323.7 | 1339.1 | 15.4 | 2.7 | 0.8 |
Seven 2000 series holes (12,418 ft) were collared from surface and twelve 7000 series holes (10,715 ft) were collared from underground. Assays are reported below for all 19 new holes (see Figure 2 and Table 1 for details and notes). The results from previously reported FNX holes are contained in Table 1A while the results from historic drilling are presented in Table 1B. One underground drill rig, located on the 1600 Level, is continuing to drill other Levack targets
The Levack mine was initially operated between 1915 and 1929 and was in continuous production again from 1937 to 1999. The Levack Mine produced approximately 64.3 million tons of ore averaging 1.88% Ni, 1.3% Cu, 0.056% cobalt (Co) and 0.049 oz/ton of Total Precious Metals. Since closure in 1999, the upper part of the Levack Mine has been maintained in a dry condition. The Levack property has usable surface infrastructure, including the Levack #2 headframe, hoists, fresh air raises and buildings. The mine also has extensive underground infrastructure and is accessible via the multi-compartment Levack # 2 shaft, which has a production capacity in excess of 4,000 tpd, and is currently dry to the 2600 Level. Access to the 1600 Level of the Levack Mine has been gained via the 1600 Level from the immediately adjacent McCreedy West Mine, which is currently in production by the Sudbury Joint Venture (SJV). The required reconditioning of the #2 Shaft and associated underground infrastructure to a level capable of supporting production is expected to start later this summer.
Sudbury Joint Venture - General
The Sudbury Joint Venture is owned 75% by FNX (exploration operator) and 25% by Dynatec (mining operator). The Sudbury Joint Venture properties (McCreedy West, Levack, Victoria, Norman and Kirkwood) are all former copper, nickel, platinum, palladium and gold producers. The properties are located in the Sudbury District of northeastern Ontario and are covered by previously announced agreements between FNX and Inco Limited (see January 11, 2002 FNX press release) and FNX and Dynatec Corporation (see February 3, 2002 FNX and DY press release). For a detailed description of the properties and previous work, please go to the FNX website "www.fnxmining.com" and refer to FNXs Annual Information Form dated March 23, 2004.
James M. Patterson, Ph.D., P.Geo., and Vice President Exploration of FNX, is the designated Qualified Person and responsible for the verification and quality assurance of the Sudbury Joint Ventures exploration data and analytical results. Anthony P. Makuch, M. Eng., P. Eng., M.B.A., and Dynatecs Vice President, Sudbury Joint Venture Mining Operations, oversees mining activities on behalf of the Sudbury Joint Venture. Please see the July 16, 2003 FNX news release and the March 23, 2004 Annual Information Form for a description of sample preparation and assay procedures for the Sudbury Joint Venture.
This press release contains certain forward-looking statements. While these forward-looking statements represent our best current judgment, they are subject to a variety of risks and uncertainties, including the risk factors listed in FNX Minings Annual Information Forms filed with the TSX, that are beyond the companys ability to control or predict and which could cause actual events or results to differ materially from those anticipated in such forward-looking statements. Accordingly, readers should not place undue reliance on forward-looking statements.
For further information, please contact:
Terry MacGibbon, President and CEO
Tel: 416-628-5929, Fax 416-360-0550, Email: tmacgibbon@fnxmining.com
David Constable, Vice President, Investor Relations and Corporate Affairs
Telephone: 416-628-5938, Fax: 416-360-0550, Email: dconstable@fnxmining.com,
FNX Website - www.fnxmining.com
Notes to Tables:
The lengths reported are drill intersected core lengths.
Cu = copper; Ni = nickel.
nsv = no significant values
2000 series holes are collared from surface
7000 series holes are collared from underground
TABLE 1 -1300 DEPOSIT-FNX Results Reported Today
DDH | East | North | Elev | Az° | Dip° | Feet | % | True Width % | |||
From | To | Length | Ni | Cu | |||||||
FNX7000 | 10975.0 | 9411.0 | 11525.0 | 181.1 | 18.1 | 810.5 | 826.1 | 15.6 | 1.6 | 0.6 | 100 |
and | 838.8 | 841.2 | 2.4 | 1.4 | 0.5 | ||||||
FNX7001 | 10975.0 | 9411.0 | 11525.0 | 178.0 | 23.3 | nsv | |||||
FNX7002 | 10975.0 | 9411.0 | 11525.0 | 178.0 | 14.0 | 815.5 | 836.2 | 20.7 | 1.2 | 1.1 | 100 |
FNX7003 | 11054.0 | 9407.0 | 11252.0 | 180.1 | 23.1 | 711.5 | 718.1 | 6.6 | 2.9 | 0.7 | 100 |
834.5 | 852.5 | 18.0 | 2.2 | 0.4 | |||||||
incl. | 834.5 | 842.4 | 7.9 | 3.8 | 0.6 | ||||||
FNX7004 | 11054.0 | 9407.0 | 11252.0 | 181.9 | 16.8 | 738.2 | 749.1 | 10.9 | 1.3 | 0.4 | 60-80 |
762.7 | 865.0 | 102.3 | 2.6 | 0.5 | |||||||
incl. | 771.5 | 826.9 | 55.4 | 3.9 | 0.6 | ||||||
FNX7005 | 11054.0 | 9407.0 | 11252.0 | 179.5 | 29.7 | 799.9 | 800.5 | 0.6 | 2.8 | 1.0 | 100 |
FNX7006 | 11114.0 | 9405.0 | 11525.0 | 177.5 | 33.6 | 807 | 809.8 | 2.8 | 1.5 | 0.8 | 100 |
FNX7007 | 11114.0 | 9405.0 | 11525.0 | 168.9 | 25.4 | 747.0 | 768.6 | 21.6 | 1.9 | 0.7 | 100 |
incl. | 757.4 | 768.6 | 11.2 | 2.8 | 0.8 | ||||||
FNX7008 | 11114.0 | 9405.0 | 11525.0 | 176.4 | 16.0 | 791.7 | 818.3 | 26.6 | 1.7 | 0.8 | 100 |
incl. | 802.1 | 818.3 | 16.2 | 2.1 | 1.0 | ||||||
FNX7009 | 11175.0 | 9412.0 | 11526.0 | 182.5 | 20.3 | 747.8 | 766.6 | 18.8 | 2.2 | 0.6 | 100 |
FNX7011 | 11210.0 | 9411.0 | 11526.0 | 180.1 | 36.6 | nsv | |||||
FNX7012 | 11210.0 | 9411.0 | 11526.0 | 179.9 | 28.2 | 752.8 | 753.7 | 0.9 | 4.7 | 0.3 | 100 |
FNX2039 | 11050.0 | 8307.0 | 13124.0 | 353.1 | -83.4 | 1473.4 | 1493.6 | 20.2 | 2.2 | 0.7 | 100 |
incl. | 1476 | 1485.2 | 9.2 | 3.1 | 0.9 | ||||||
and | 1518.9 | 1528.0 | 9.1 | 2.6 | 0.7 | 100 | |||||
FNX2040 | 11050.0 | 8307.0 | 13124.0 | 356.6 | -86.5 | nsv | |||||
FNX2041 | 11125.0 | 8339.0 | 13105.0 | 346.5 | -80.7 | 1297.7 | 1299.2 | 1.5 | 1.5 | 0.6 | 100 |
FNX2042 | 11175.0 | 8266.0 | 13135.0 | 355.5 | -82.9 | 1472.9 | 1494.7 | 21.8 | 1.6 | 0.3 | 100 |
incl. | 1478.1 | 1490.2 | 12.1 | 2.2 | 0.3 | ||||||
FNX2043 | 11250.0 | 8249.0 | 13139.0 | 358.7 | -77.9 | 1475.8 | 1478.0 | 2.2 | 1.1 | 1.1 | 100 |
FNX2046 | 11275.0 | 8255.0 | 13147.0 | 355.9 | -82.5 | 1456.7 | 1469.0 | 12.3 | 1.7 | 0.5 | 100 |
FNX2047 | 11225.0 | 8490.0 | 13106.0 | 354.9 | -81.9 | 1323.7 | 1339.1 | 15.4 | 2.7 | 0.8 | 100 |
TABLE 1A - 1300 DEPOSIT FNX Results Previously Reported
DDH | East | North | Elev | Az0 | Dip0 | Feet | % | True Width % | |||
From | To | Length | Ni | Cu | |||||||
FNX2001 | 10673.0 | 8210.0 | 13115.0 | 37.6 | -65.2 | 1470.0 | 1505.7 | 35.7 | 2.0 | 0.6 | 95 |
incl. | 1470.0 | 1489.3 | 19.3 | 2.6 | 0.9 | ||||||
FNX2007 | 10980.0 | 8397.0 | 13104.0 | 003.0 | -80.3 | 1294.2 | 1392.8 | 98.6 | 1.3 | 0.5 | 90 |
incl. | 1330.3 | 1353.4 | 23.1 | 2.9 | 0.8 | ||||||
FNX2009 | 11170.0 | 8266.0 | 13137.0 | 359.6 | -80.1 | 1412.9 | 1492.7 | 79.8 | 1.6 | 0.7 | 100 |
incl. | 1460.1 | 1492.7 | 32.6 | 2.1 | 0.8 | ||||||
FNX2010 | 11002.0 | 8429.0 | 13103.0 | 359.4 | -71.4 | 1202.8 | 1210.9 | 8.1 | 1.8 | 0.5 | 95 |
FNX2011 | 11098.0 | 8328.0 | 13144.0 | 356.8 | -83.0 | 1483.7 | 1504.1 | 20.4 | 1.0 | 0.4 | 100 |
FNX2013 | 11260.0 | 8248.0 | 13139.0 | 357.1 | -79.4 | 1438.0 | 1480.2 | 42.2 | 2.7 | 0.7 | 100 |
incl. | 1438.0 | 1450.6 | 12.6 | 4.3 | 0.8 | ||||||
FNX2014 | 11170.0 | 8267.0 | 13136.0 | 358.0 | -77.6 | 1455.6 | 1471.0 | 15.4 | 1.4 | 0.5 | 100 |
TABLE 1B -1300 DEPOSIT Historical Results
DDH | East | North | Elev | Az0 | Dip0 | Feet | % | True Width % | |||
From | To | Length | Ni | Cu | |||||||
28320 | 11120.0 | 8785.0 | 12277.0 | 360.0 | -68.0 | 238.4 | 256.7 | 18.3 | 1.8 | 0.7 | 90 |
971350 | 11137.0 | 8392.0 | 13106.0 | 359.6 | -73.0 | 1264.5 | 1286.5 | 22.0 | 1.5 | 0.9 | 85 |
971430 | 11028.0 | 8302.0 | 13130.0 | 009.6 | -76.0 | 1459.0 | 1482.8 | 23.8 | 1.7 | 0.6 | 90 |
971450 | 11129.0 | 8370.0 | 13108.0 | 354.6 | -85.0 | 1406.8 | 1461.5 | 54.7 | 1.5 | 0.5 | 100 |
971460 | 11283.0 | 8246.0 | 13140.0 | 357.6 | -84.0 | 1494.7 | 1507.3 | 12.6 | 1.3 | 0.3 | 100 |
971410 | 11022.0 | 8302.0 | 13129.0 | 009.6 | -74.0 | 1354.8 | 1420.5 | 65.7 | 3.3 | 1.1 | 60 |