UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-K

(Mark One)

For the fiscal year ended December 29, 2018

or

For the transition period from                to                

Commission file number 0-26946

INTEVAC, INC.

(Exact name of registrant as specified in its charter)

3560 Bassett Street

Santa Clara, California 95054    

(Address of principal executive office, including Zip Code)

Registrant’s telephone number, including area code: (408) 986-9888    

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:

None.

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    ☐  Yes    ☒  No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    ☐  Yes    ☒  No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    ☒  Yes    ☐  No

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).    ☒  Yes    ☐  No

Indicate by a check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K(§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    ☒

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.:

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    ☐  Yes    ☒  No

As of June 30, 2018, the aggregate market value of voting and non-voting stock held by non-affiliates of the Registrant was approximately $106,877,786 (based on the closing price for shares of the Registrant’s Common Stock as reported by the Nasdaq Stock Market for the last trading day prior to that date). Shares of Common Stock held by each executive officer and director have been excluded in that such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.

On February 8, 2019, 22,911,918 shares of the Registrant’s Common Stock, $0.001 par value, were outstanding.

DOCUMENTS INCORPORATED BY REFERENCE.

Portions of the Registrant’s Proxy Statement for the 2019 Annual Meeting of Stockholders are incorporated by reference into Part III. Such proxy statement will be filed within 120 days after the end of the fiscal year covered by this Annual Report on Form 10-K.

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

Certain information in this Annual Report on Form 10-K (“report” or “Form 10-K”) of Intevac, Inc. and its subsidiaries (“Intevac” or the “Company”), including “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Item 7, is forward-looking in nature. All statements in this report, including those made by the management of Intevac, other than statements of historical fact, are forward-looking statements. Examples of forward-looking statements include statements regarding Intevac’s future financial results, operating results, cash flows and cash deployment strategies, business strategies, costs, products, working capital, competitive positions, management’s plans and objectives for future operations, research and development, acquisitions and joint ventures, growth opportunities, customer contracts, investments, liquidity, declaration of dividends, and legal proceedings, as well as market conditions and industry trends. These forward-looking statements are based on management’s estimates, projections and assumptions as of the date hereof and include the assumptions that underlie such statements. Forward-looking statements may contain words such as “may,” “will,” “should,” “could,” “would,” “expect,” “plan,” “anticipate,” “believe,” “estimate,” “predict,” “potential” and “continue,” the negative of these terms, or other comparable terminology. Any expectations based on these forward-looking statements are subject to risks and uncertainties and other important factors, including those discussed in Item 1A, “Risk Factors,” below and elsewhere in this report. Other risks and uncertainties may be disclosed in Intevac’s prior Securities and Exchange Commission (“SEC”) filings. These and many other factors could affect Intevac’s future financial condition and operating results and could cause actual results to differ materially from expectations based on forward-looking statements made in this report or elsewhere by Intevac or on its behalf. Intevac undertakes no obligation to revise or update any forward-looking statements.

The following information should be read in conjunction with the Consolidated Financial Statements and the accompanying Notes to Consolidated Financial Statements included in this report.

PART I

Overview

Intevac’s business consists of two reportable segments:

Thin-film Equipment (“TFE”): Intevac is a leader in the design and development of high-productivity, thin-film processing systems. Our production-proven platforms are designed for high-volume manufacturing of substrates with precise thin-film properties, such as the hard disk drive (“HDD”) media, display cover panel (“DCP”), and solar photovoltaic (“PV”) markets we serve currently.

Photonics: Intevac is a leading developer of advanced high-sensitivity digital sensors, cameras and systems that primarily serve the defense industry. We are a leading provider of integrated digital night-vision imaging systems for the U.S. military.

Intevac was incorporated in California in October 1990 and was reincorporated in Delaware in 2007.

TFE Segment

Hard Disk Drive (“HDD”) Equipment Market

Intevac designs, manufactures, markets and services complex capital equipment used to deposit thin films and lubricants onto substrates to produce magnetic disks that are used in HDDs. Disk and disk drive manufacturers produce magnetic disks in a sophisticated manufacturing process involving many steps, including plating, annealing, polishing, texturing, sputtering, etching, stripping and lubrication. Intevac believes its systems represent approximately 60% of the installed capacity for disk sputtering worldwide. Intevac’s systems are used by manufacturers of magnetic media such as Seagate Technology, Western Digital, including its wholly-owned subsidiary HGST, Fuji Electric, and Showa Denko.

HDDs are a primary storage medium for digital data including nearline “cloud” applications and are used in products and applications such as personal computers (“PCs”), enterprise data storage, video players and video game consoles. Intevac believes that HDD media shipments will grow over time, driven by continued high growth rates in digitally-stored data, by the slowing of areal density improvements, by the increase in demand for nearline drives for cloud storage, an increasing tie ratio

2

(the average number of disks per hard drive) and by new and emerging applications. The projected growth rates for digitally-stored data on HDDs exceed the rate of areal density improvements, at the same time as the tie ratio is increasing, which results in demand for magnetic disks outpacing HDD units.

In recent years HDD media units have been negatively impacted by declining PC units, primarily caused as a result of the proliferation of tablets and the transition to centralized storage. Although the HDD industry continues to expect growth in the nearline data storage market segment, the transition to centralized storage combined with the negative growth in PC shipments has resulted in lower HDD shipments in recent years. However, Intevac continues to believe that long-term demand for hard disks required for high capacity HDDs will increase, driven by growth in demand for digital storage, a declining growth rate in areal density improvements, and increased information technology spending to support the transition to cloud storage. The number of disk manufacturing systems needed to support this growth as well as future technology transitions and improvements is expected to vary from year to year depending on the factors noted above.

Intevac expects that HDD manufacturers will extend their utilization of planar perpendicular media with the introduction of new technologies such as Heat Assisted Magnetic Recording (“HAMR”) and Microwave Assisted Magnetic Recording (“MAMR”). Initial volume shipments of both HAMR and MAMR-based HDDs are expected to begin in 2020. Intevac believes that leading manufacturers of magnetic media, that are using Intevac systems for the development of these new technologies, will create a significant market opportunity for systems upgrades in support of the media evolution required by these new technologies as they are more widely adopted.

Display Cover Panel (“DCP”) Market

Intevac develops equipment to deposit optically transparent thin films onto DCPs typically found on consumer and automotive electronic products.

DCPs are found in products including smartphones, tablet PCs, wearable devices, gaming systems, digital cameras, automotive infotainment systems and digital signage. In 2018, approximately 1.46 billion smartphones, 152 million tablet PCs and 44 million smart watches were shipped to consumers worldwide. For smartphones alone, it is forecasted that nearly 1.6 billion units will ship by 2022, representing a CAGR of 2.4% for the 2017 – 2022 time period.

The DCP is typically made of tempered glass, such as soda-lime or aluminosilicate, or other materials such as sapphire, ceramic and colorless polyimide. The primary function of the DCP is to provide a clear protective interface to the display it protects. In many cases, the DCP is treated with various coatings to enhance its protective performance as well as for clarity, readability and touch sensitivity.

The types of coatings typically found on DCPs of electronic devices include: Scratch Protection (“SP”) coatings, Anti-Reflection (“AR”) coatings, Anti-Finger (“AF”) and Non-Conductive Vacuum Metallization (“NCVM”) coatings.

SP coatings generally consist of hard thin films deposited onto the surface of the DCP. Their primary function is to provide enhanced protection against the incidence of scratch, but they can also provide greater breakage resistance.

AR coatings enable greater light transmission though the DCP by reducing the light reflected by the surface back to the user’s eye. This allows the user to more easily read the display and reduces the required power needed to display the image which results in extending the battery life. A significant drawback to using AR coatings is their susceptibility to scratch. AR coatings are typically soft and must be applied to the outer surface of the DCP. These coatings generally scratch easily, and as such, smartphone manufacturers have been reluctant to implement AR coatings on their products.

AF coatings provide water and oil protection for the surface of the DCP. This coating, which prevents fingerprints, provides greater aesthetics as well as improving readability. AF coatings allow for greater visual acuity when fingerprints are not visible. The drawback to AF coatings is their relatively low resistance to wear. The coating is soft and usually wears off within a few months of product purchase.

With the adoption of wireless charging and the upcoming 5G standard of wireless communication, smartphone manufacturers are making a major transition to DCP on the backside of the device. This transition is essential to ensure that the backside cover, which previously used to be metallic, does not interfere with the wireless signals. NCVM coatings are a new type of color film coating, applied for decorative purposes, to the backside DCP. When applied to the exterior, the NCVM

3

coating provides a pleasing aesthetic and gives manufacturers flexibility with color customization. Decorative NCVM coatings have evolved from single color to multiple colors with complex transitions. Intevac has developed a proprietary technology that enables the creation of uniquely patterned NCVM coatings for the phone back cover. Several leading handset manufacturers are currently evaluating this technology for potential incorporation into their upcoming phone models.

NCVM has a tendency to scratch easily and rub off over time, leading to a poor appearance. To preserve the color film on the backside DCP, manufacturers are reliant on SP coatings for scratch-resistance and a consistent appearance.    Intevac has developed and is currently marketing a SP coating known as Optical Diamond-like-Carbon (“oDLC^®”) utilizing its production-proven carbon film technology that is also used on HDD media. This coating provides a hard protective layer which significantly improves the DCP’s resistance to scratches and breakage. The scratch protection benefits with the oDLC coating has demonstrated a greater than 20 times improvement over current standard cover glass under stainless steel ball Taber scratch testing. Furthermore using a Ring-on-Ring (“RoR”) test, cover glass with our oDLC coating provides a greater than 20 percent increase in breakage resistance strength over cover glass without the oDLC coating. Intevac expects that the adoption of AR and NCVM coatings on mobile devices will create an increased need for SP coatings and provide a significant demand opportunity for oDLC.

Solar Market

Intevac designs, manufactures and markets capital equipment for the PV solar manufacturing industry.

A solar cell (also called a PV cell) is a solid state device that converts the energy of sunlight directly into electricity. Assemblies of cells are used to make solar modules, also known as solar panels. Solar panels have broad-based end market applications for utility-scale solar farms; integrated building PV arrays for commercial, retail, and offices; residential rooftop; and for portable devices.

The cost of electricity generated from solar energy, in many cases, remains higher than that of electricity generated from traditional energy sources. However, deployment of photovoltaics is gaining momentum on a worldwide scale, particularly in Asia, North America and other regions, where solar PV is now increasingly competitive with conventional energy sources. Grid parity, whereby solar PV generates power at a levelized cost of electricity (“LCOE”) less than or equal to the price of power purchased from the electrical grid, has already been reached in about thirty countries. In countries or areas where the cost of solar energy generation remains higher than traditional electricity generation sources, some governments have implemented various tax credits and other financial incentives to promote the growth in solar and other alternative energy sources. As a result of solar energy costs having favorably declined due to the increased scale and improved manufacturing efficiencies spurred by these incentive policies, many governments have reduced or are planning to reduce their incentives for solar, a trend which is likely to continue. More than 85 gigawatts of solar capacity were added globally in 2018, tapering off 13% year-on-year, but the rate is expected to rise to a sustained growth of 17% in 2019. Intevac expects that 2019 will continue to be challenging for the solar industry due to further declines in solar panel pricing.

The PV industry continues to focus on the development of high-efficiency cell technologies aimed at simultaneously boosting PV efficiency and reducing solar energy production costs. New vacuum process technologies and integrated processing steps are expected to become increasingly important as companies search for lower-cost manufacturing solutions for PV cells.

Intevac offers products for wafer-based crystalline silicon (“c-Si”) solar cell manufacturing processes, the prevailing manufacturing process in the PV industry. Intevac’s products for the solar industry are specifically focused on cell designs with the highest energy conversion efficiency, which are within the n-type mono crystalline portion of the market.

Intevac offers thin-film vacuum process manufacturing solutions for c-Si cell fabrication applications. Intevac offers high-productivity process equipment solutions that enable low-cost solar cell manufacturing with high cell efficiency, consistent with the PV industry’s focus and requirements. Intevac has developed two vacuum process application technologies for solar cell manufacturing: one utilizes Physical Vapor Deposition (“PVD”) technology for the deposition of thin films onto c-Si wafers, and the other utilizes ion implantation, which selectively changes the electrical characteristics of the c-Si solar cell.

PVD is a process used in multiple ways in the manufacturing of solar cells such as for fabricating electrical contacts and conductor layers, depositing reflective layers of various types, and for growing transparent conductive oxide layers, all of which are critical to the efficiency of solar cells.

4

Ion implantation is a solar cell processing technology whereby an impurity is added to a PV structure to improve its conductivity. In ion implantation, a beam of ions of a desired dopant element such as phosphorus or boron is electrostatically accelerated and directed toward the target material, introducing the impurity. In a subsequent thermal annealing step, the dopant is electrically activated. The ion implant processes enable precision engineering of the dose and of the depth of dopant elements to form emitter structures in working solar cells. Ion implantation is a technique being introduced to solar cell lines as a means to lower the cost per watt to manufacture the cell. Ion implantation can replace existing diffusion processes in existing solar processing lines for present-day PV cell structures, and is also extendable to new advanced cell structures. In both cases, ion implant-formed emitters are created with fewer processing steps, and therefore at lower cost, than the diffusion processes implant displaces. Intevac’s ion implantation products are based upon technology developed by Solar Implant Technologies, Inc. (“SIT”) which was acquired by Intevac in November 2010.

Fan-Out Packaging Market

Intevac is bringing to market capital equipment for fan-out packaging applications, fan-out packaging being a specialized part of the overall semiconductor device packaging market.

Semiconductor device packaging technology in general, and fan-out wafer level packaging (“FOWLP”)/fan-out panel level packaging (“FOPLP”) technology in particular, is being driven by the strong cost advantages these technologies offer over the cost of further implementing continued Moore’s Law progress for 10nm and 7nm semiconductor device process nodes. Generally speaking, fan-out packaging provides for increased Input/Output (“I/O”) density for a given semiconductor device while simultaneously supporting continued progress in shrinking the individual semiconductor devices, resulting in decreased footprint per device and, by extension, decreases in the amount of space integrated circuit content occupies in handheld consumer electronic products, for example in smartphones, wearables, and in Internet of Things (“IoT”) devices.

Fan-out packaging technology consists of a series of operations where known good semiconductor devices from silicon wafers fabricated by an Integrated Device Manufacturer (“IDM”), or by a semiconductor foundry, are singulated and then assembled onto a substrate or temporary carrier, which is then overmolded with epoxy mold compound and cured to create what is known as a reconstituted wafer. The reconstituted wafer then goes through another series of process steps (dielectric deposition, metallization, photolithography), to create a redistributed “fan-out” of the electrical interconnections from the original silicon device area to an expanded area that includes the device (die) surface itself, along with a generous amount of extra surface created from the mold compound area.

A redistribution layer (“RDL”) is the “fanned-out” metal layer on a packaged integrated circuit that makes the I/O pads of the integrated circuit available in other locations. PVD processes are essential to RDL fabrication; in fan-out packaging, our INTEVAC MATRIX^®PVD system is used to deposit thin layers of Titanium (“Ti”), Titanium Tungsten (“TiW”) and Copper (“Cu”) to form the barrier/seed layer upon which the full RDL is constructed.

Applications driving the adoption of fan-out packaging include, among others: (1) baseband processors and application processors; (2) radio frequency (“RF”) transceivers and switches; (3) power management integrated circuits (“PMIC”); (4) radar modules for automotive; (5) audio codec; and (6) microcontrollers.

Smartphones of the iPhone 8 generation and above incorporate fan-out packaged components, as do most higher-end automobiles. IoT applications in the future are expected to contribute additional significant volume in fan-out packaged devices.

The compelling advantages our INTEVAC MATRIX PVD system brings to fan-out packaging are a much-reduced cost of ownership over the current PVD process tools of record used for RDL barrier/seed layer applications, and also the flexibility to run round wafers, and square or rectangular panels, with no changes to the INTEVAC MATRIX PVD system beyond a simple substrate carrier substitution.

TFE Products

Intevac’s TFE product portfolio addressing each of these markets is based around common core technologies and competencies. Intevac believes its TFE product portfolio can be extended to support adjacent markets. Based on its history and market and technology leadership in the HDD industry, Intevac offers superior high-productivity vacuum handling of small substrates at the lowest cost of ownership. Lowest cost of ownership includes various advantages such as high target utilization, high throughput, small footprint, double-sided coating, and reduced materials costs.

5

Product Table

The following table presents a representative list of the TFE products that we offered during fiscal 2018 and fiscal 2017.

Photonics Segment

Photonics Market

Intevac Photonics develops, manufactures and sells compact, high-sensitivity digital-optical products for the capture and display of extreme low-light images. These products incorporate high resolution digital night-image sensors operating in the visible and near infrared (“NIR”) light spectrums and are based on Intevac’s proprietary EBAPS^® (Electron Bombarded Active Pixel Sensor) technology.

6

Photonics products primarily address the high performance military night-vision market. Our products provide digital imagery in extremely low-light level conditions. Intevac provides these products for military aircraft including the U.S. Army AH-64 Apache Attack Helicopter and the F-35 Joint Strike Fighter. Additionally, the Company is developing additional technologies to address soldier head-mounted and weapon-mounted applications.

Military Products

Intevac’s EBAPS is incorporated into custom-designed cameras, modules and system products for high performance military applications. Intevac’s EBAPS can be integrated at various levels with optics, electronics, software, and displays based upon customer specifications and requirements. Intevac is developing a next-generation, 3.7 mega-pixel resolution EBAPS which will operate at higher resolutions, lower light levels, higher speeds, and lower power consumption for use in next-generation systems. Customization typically occurs in the areas of electronics, near-eye micro-displays and mechanical packaging. Intevac’s products by application are:

Helicopter Pilotage    

Intevac provides a night-vision camera with a 2.0 mega-pixel resolution EBAPS module which is gimbal turret-mounted on the nose of the Apache helicopter. The low-light level digital video is then viewable by the helicopter pilot on a Head-Mounted Display (“HMD”) enabling the pilot to have enhanced night vision and allowing the aircrew to view multiple aircraft-mounted sensor information.

Fixed Wing Aircraft Pilotage

Intevac provides night-vision modules with a 2.0 mega-pixel resolution EBAPS module which are integrated with the F-35 fighter pilot’s helmet and enables the pilot to have enhanced night vision incorporating navigational and tactical information. Additionally, a similar integrated night vision camera utilizing a 2.0 mega-pixel resolution EBAPS is being designed into the Striker II helmet for the NATO Eurofighter Typhoon aircraft.

Long-Range Target Identification

Intevac provides the Laser Illuminated Viewing and Ranging (“LIVAR^®”) shortwave-infrared camera for long range military night time surveillance systems that can identify targets at distances of up to twenty kilometers. Photonics’ LIVAR camera is incorporated into long range target identification systems manufactured by a major defense contractor.

Augmented Reality (“AR”) and Wireless HMDs

Intevac provides HMDs for applications in AR and weapon sights. The HMD is a near-eye, high-definition, wide field-of-view (“FOV”) micro-display system for portable viewing of video in military and commercial applications. Depending on the application, Intevac provides configuration choices that include monocular or binocular, mono or stereo video, wired or wireless interfaces, and with integral inertial measurement units (“IMU”). An AR HMD overlays symbology and other information on and tracked in a view of the real world, creating the illusion that they occupy the same space. Intevac has developed and demonstrated wide FOV AR displays for use in HMDs. Intevac is providing its wireless HMD into a large U.S. Army Program of Record to allow remote viewing of a crew-served weapon targeting systems.

Soldier Mobility

Intevac is developing a digital-fused binocular night-vision goggle with AR which will integrate the next-generation EBAPS. This goggle will demonstrate superior night-vision capability, with digital advantages, such as zoom, information overlay, and wireless image transmission and reception.

Intevac is developing a digital night-vision camera which will be integrated into the U.S. Army’s Integrated Visual Augmentation System (“IVAS”). The IVAS will incorporate head, body, and weapon technologies on individual soldiers. It is a single platform that soldiers can use to fight, rehearse, and train that provides increased mobility and situational awareness necessary to achieve overmatch against adversaries and includes a squad-level combat training capability.

7

Commercial Products

Low-Light Cameras

Photonics’ MicroVista^® product line of commercial compact and lightweight low-light Complementary Metal–Oxide–Semiconductor (“CMOS”) cameras provides high sensitivity in the ultraviolet, visible or NIR regions of the spectrum for use in industrial inspection, bio-medical and scientific applications. These cameras are primarily sold through distribution channels and to original equipment manufacturers.

Customer Concentration

Historically, a significant portion of Intevac’s revenue in any particular period has been attributable to sales to a limited number of customers.

The following customers accounted for at least 10 percent of Intevac’s consolidated net revenues in fiscal 2018 and 2017.

* Less than 10%

Intevac expects that sales of Intevac’s products to relatively few customers will continue to account for a high percentage of Intevac’s revenues in the foreseeable future.

Foreign sales accounted for 71% of revenue in fiscal 2018 and 67% of revenue in fiscal 2017. The majority of Intevac’s foreign sales are to companies in Asia or to U.S. companies for use in their Asian manufacturing or development operations. Intevac anticipates that foreign sales will continue to be a significant portion of Intevac’s TFE revenues. Intevac’s disk sputtering equipment customers include magnetic disk manufacturers, such as Fuji Electric and Showa Denko, and vertically integrated HDD manufacturers, such as Seagate, Western Digital and HGST. Intevac’s PV solar equipment customers including several major solar cell manufacturers. Intevac’s DCP equipment customers include DCP manufacturers, such as Truly Opto-electronics. Intevac’s customers’ manufacturing facilities are primarily located in California, China, Taiwan, Japan, Malaysia, Philippines and Singapore.

Competition

The principal competitive factors affecting the markets for Intevac TFE products include price, product performance and functionality, ease of integration, customer support and service, reputation and reliability. Intevac has one major competitor, Canon Anelva, in the hard disk drive equipment market and has historically experienced intense worldwide competition for magnetic disk sputtering equipment. Intevac primarily faces competition from large established global competitors in the PV equipment market including Applied Materials, Centrotherm Photovoltaics, Amtech, Jusung and Von Ardenne. Intevac faces competition in the DCP market from optical coating equipment manufacturers such as Optorun and Shincron, glass manufacturers that may develop scratch resistant glass, touchscreen manufacturers that may adopt harder substrate materials, or other equipment companies, chemical companies or the display cover plate manufacturers themselves that may offer competing protective coatings including oDLC. Intevac’s competitors for PVD processes in the fan-out packaging market include the companies SPTS Technologies, Evatec AG, ULVAC Technologies, Inc., Tango Systems, Inc., and NEXX Systems. These competitors generally have substantially greater financial, technical, marketing, manufacturing and other resources as compared to Intevac. Furthermore, any of Intevac’s competitors may develop enhancements to, or future generations of, competitive products that offer superior price or performance features. In addition, new competitors, with enhanced products may enter the markets that Intevac currently serves.

The principal competitive factors affecting Photonics products include price, extreme low-light level performance, power consumption, resolution, size, ease of integration, reliability, spectral band, reputation and customer support and service. Intevac faces substantial competition for Photonics products, and many competitors have substantially greater resources and brand recognition. In the military market for soldier and helicopter night vision goggles, Harris Corporation and L-3 Communications are large and well-established defense contractors and are the primary U.S. manufacturers of analog image intensifier tubes used

8

in Generation-III night-vision devices. For long range airborne targeting applications, Intevac competes against camera providers using low light CMOS imagery. Intevac expects that other companies will develop digital night-vision products and aggressively promote their sales. Within the near-eye display market, Intevac also currently faces competition from Rockwell-Collins, Kopin and Six 15 Technologies in the defense space and anticipates that in the future it will experience competition from lower performance, niche commercial HMD providers expanding into defense applications, all of which can offer cost-competitive products.

Marketing and Sales

TFE sales are made primarily through Intevac’s direct sales force. Intevac also sells its products through distributors in Japan and China. The selling process for Intevac’s TFE products is multi-level and lengthy, involving individuals from marketing, engineering, operations, customer service and senior management.

Installing and integrating new equipment requires a substantial investment by a customer. Sales of Intevac’s systems depend, in significant part, upon the decision of a prospective customer to replace obsolete equipment or to increase manufacturing capacity by upgrading or expanding existing manufacturing facilities or by constructing new manufacturing facilities, all of which typically involve a significant capital commitment. Intevac’s systems have a lengthy sales cycle, during which Intevac may expend substantial funds and management time and effort with no assurance that a sale will result.

The production of large complex systems requires Intevac to make significant investments in inventory both to fulfill customer orders and to maintain adequate supplies of spare parts to service previously shipped systems. Intevac maintains inventories of spare parts in the United States, Singapore, Malaysia and China to support its TFE customers. Intevac often requires its TFE customers to pay for systems in three installments, with a portion of the system price billed upon receipt of an order, a portion of the price billed upon shipment, and the balance of the price and any sales tax due upon completion of installation and acceptance of the system at the customer’s factory.

Intevac provides process and applications support, customer training, installation, start-up assistance and post-installation service support to Intevac’s TFE customers. Intevac has field offices in Singapore, China, and Malaysia to support Intevac’s customers in Asia.

Warranties for Intevac’s TFE products typically range between 12 and 24 months from customer acceptance. During the warranty period any necessary non-consumable parts are supplied and installed without charge.

Sales of Photonics products for military applications are primarily made to the end user through Intevac’s direct sales force. Intevac sells to the U.S. government and to leading defense contractors such as Lockheed Martin Corporation, Northrop Grumman Corporation, Elbit Systems of America, Raytheon, Leonardo DRS, BAE Systems and Safran Electronics and Defense.

Intevac is subject to long sales cycles in the Photonics segment because many of Intevac’s products, such as Intevac’s night-vision systems, typically must be designed into Intevac’s customers’ products, which are often complex and state-of-the-art. These development cycles are generally multi-year, and Intevac’s sales are dependent on Intevac’s customer successfully integrating Intevac’s product into its product, completing development of its product and then obtaining production orders for its product. Sales of these products are also often dependent on ongoing funding of defense programs by the U.S. government and its allies. Additionally, sales to international customers are contingent on issuance of export licenses by the U.S. government.

Photonics generally invoices its research and development customers either as costs are incurred, or as program milestones are achieved, depending upon the particular contract terms. As a government contractor, Intevac invoices customers using estimated annual rates approved by the Defense Contracts Audit Agency (“DCAA”).

Research and Development and Intellectual Property

Intevac’s long-term growth strategy requires continued development of new products. Intevac works closely with Intevac’s customers to design products that meet their planned technical and production requirements. Product development and engineering organizations are located primarily in the United States and Singapore.

9

Intevac’s competitive position significantly depends on Intevac’s research, development, engineering, manufacturing and marketing capabilities, and not just on Intevac’s patent position. However, protection of Intevac’s technological assets by obtaining and enforcing intellectual property rights, including patents, is important. Therefore, Intevac’s practice is to file patent applications in the United States and other countries for inventions that Intevac considers important. Although Intevac does not consider Intevac’s business materially dependent upon any one patent, the rights of Intevac and the products made and sold under Intevac’s patents along with other intellectual property, including trademarks, know-how, trade secrets and copyrights, taken as a whole, are a significant element of Intevac’s business.

Intevac enters into patent and technology licensing agreements with other companies when management determines that it is in Intevac’s best interest to do so. Intevac pays royalties under existing patent license agreements for use of certain patented technologies in several of Intevac’s products. Intevac also receives, from time to time, royalties from licenses granted to third parties. Royalties received from or paid to third parties have not been material to Intevac’s consolidated results of operations.

In the normal course of business, Intevac periodically receives and makes inquiries regarding possible patent infringements. In dealing with such inquiries, it may be necessary or useful for us to obtain or grant licenses or other rights. However, there can be no assurance that such licenses or rights will be available to us on commercially reasonable terms, or at all. If Intevac is not able to resolve or settle claims, obtain necessary licenses and/or successfully prosecute or defend Intevac’s position, Intevac’s business, financial condition and results of operations could be materially and adversely affected.

Manufacturing

Intevac manufactures its TFE products at its facilities in California and Singapore. Intevac’s TFE manufacturing operations include electromechanical assembly, vacuum processing, fabrication of sputter sources, and system assembly, alignment and testing.

Photonics products are manufactured at Intevac’s facilities in California. Photonics manufactures sensors, cameras, integrated camera systems, and near-eye display systems using advanced manufacturing techniques and equipment. Intevac’s operations include vacuum processing, and electromechanical and optical system assembly.

Employees

At December 29, 2018, Intevac had 257 employees, including 7 contract employees.

Compliance with Environmental Regulations

Intevac is subject to a variety of governmental regulations relating to the use, storage, discharge, handling, emission, generation, manufacture, treatment and disposal of toxic or otherwise hazardous substances, chemicals, materials or waste. Intevac treats the cost of complying with government regulations and operating a safe workplace as a normal cost of business and allocates the cost of these activities to all functions, except where the cost can be isolated and charged to a specific function. The environmental standards and regulations promulgated by government agencies in California and Singapore are rigorous and set a high standard of compliance. Intevac believes its costs of compliance with these regulations and standards are comparable to other companies operating similar facilities in these jurisdictions.

Executive Officers of the Registrant

Certain information about our executive officers as of February 13, 2019 is listed below:

10

Mr. Blonigan joined Intevac in July 2013 as President and Chief Executive Officer. Prior to joining Intevac, Mr. Blonigan co-founded Orbotech LT Solar in 2009 and served as the company’s Chief Executive Officer until 2013. From 2006 until 2009, he was the Chief Operating Officer at Photon Dynamics, Inc. In 1991, Mr. Blonigan joined Applied Materials’ AKT display subsidiary. During his tenure at AKT, he held various positions. In 2003, he was appointed President and served in this role until 2006; from 1999 through 2003 he was Vice President, and prior to that time he was Director of Engineering and New Product Development. Mr. Blonigan holds a BS in electronic engineering technology from DeVry University Missouri Institute of Technology.

Mr. Moniz joined Intevac as Executive Vice President, Finance and Administration, Chief Financial Officer and Treasurer in November 2014. Mr. Moniz previously served as the Chief Financial Officer of Nanometrics, Inc. from 2009 until his retirement in 2011. During 2008, Mr. Moniz was the Chief Financial Officer at Photon Dynamics, Inc. From 2000 until 2008, Mr. Moniz served as the Chief Financial Officer at Nextest Systems Corporation. Prior to Nextest, Mr. Moniz held senior financial management positions at Millennia Vision Corporation, Lockheed Martin Corporation, Loral Corporation and Varian Associates. Mr. Moniz holds an MBA, a BS in accounting and a BS in marketing from San Jose State University.

Mr. Justyn has served as Executive Vice President and General Manager, Photonics from February 2018. Mr. Justyn served as Senior Vice President of Global Operations from February 2015 to February 2018. Mr. Justyn served as Vice President, Photonics from October 2008 to February 2015. Mr. Justyn served as Vice President, TFE Manufacturing from April 1997 to October 2008. Mr. Justyn joined Intevac in February 1991 and has served in various roles in our TFE Products Division and our former night-vision business. Mr. Justyn holds a BS in chemical engineering from the University of California, Santa Barbara.

Mr. Cho joined Intevac in January 2014 and currently serves as Executive Vice President and General Manager, TFE. Prior to joining Intevac, Mr. Cho was President, Chief Executive Officer and Co-Founder of REEnewal Corporation. From 2006 to 2011, Mr. Cho served as Vice President / General Manager of the Tester and Repair Business Units of Orbotech LTD. From 2005 to 2006, Mr. Cho served as Vice President, Product Development at Metara Inc. From 1992 to 2005, Mr. Cho held various management positions at Novellus Systems, Inc. Prior to Novellus, Mr. Cho worked for Digital Equipment Corporation and Intermec Corporation. Mr. Cho holds a BS in electrical engineering from Washington State University and an MBA from University of Phoenix.

Mr. Aebi has served as Chief Technology Officer of the Photonics business since August 2006. Previously, Mr. Aebi served as President of the Photonics Division from July 2000 to July 2006 and as General Manager of the Photonics Division since May 1995. Mr. Aebi was elected as a Vice President of the Company in September 1995. From 1988 through 1994, Mr. Aebi was the Engineering Manager of the night-vision business Intevac acquired from Varian Associates in 1991, where he was responsible for new product development in the areas of advanced photocathodes and image intensifiers. Mr. Aebi holds a BS in physics and an MS in electrical engineering from Stanford University.

Mr. Bluck rejoined Intevac as Chief Technology Officer of the TFE in August 2004. Mr. Bluck had previously worked at Intevac from December 1996 to November 2002 in various engineering positions. The business unit Mr. Bluck worked for was sold to Photon Dynamics in November 2002, and he was employed there as Vice President, Rapid Thermal Process Product Engineering until August 2004. Mr. Bluck holds a BS in physics from San Jose State University.

Ms. Burk joined Intevac in May 2000 and currently serves as Senior Vice President of Global Human Resources. Prior to joining Intevac, Ms. Burk served as Human Resources Manager of Moen, Inc. from 1999 to 2000 and as Human Resources Manager of Lawson Mardon from 1994 to 1999. Ms. Burk holds a BS in sociology from Northern Illinois University.

Available Information

Intevac’s website is http://www.intevac.com. Intevac makes available free of charge, on or through its website, its annual, quarterly and current reports, and any amendments to those reports, as soon as reasonably practicable after electronically filing such reports with, or furnishing them to, the SEC. This website address is intended to be an inactive textual reference only and none of the information contained on Intevac’s website is part of this report or is incorporated by reference herein.

Trademarks

Intevac’s trademarks include the following: “200 Lean^®,” “EBAPS^®,” “ENERGi^®,” “LIVAR^®,” “INTEVAC LSMA^®,” “INTEVAC MATRIX^®,” “MicroVista^®,” “NightVista^®,” “oDLC^®,” “INTEVAC VERTEX^®” and “VERTEX SPECTRA™.”

11

The following factors could materially affect Intevac’s business, financial condition or results of operations and should be carefully considered in evaluating the Company and its business, in addition to other information presented elsewhere in this report.

The industries we serve are cyclical, volatile and unpredictable.

A significant portion of our revenue is derived from the sale of equipment used to manufacture commodity technology products such as disk drives, PV solar cells and cell phones. This subjects us to business cycles, the timing, length and volatility of which can be difficult to predict. When demand for commodity technology products exceeds production capacity, then demand for new capital equipment such as ours tends to be amplified. Conversely, when supply of commodity technology products exceeds demand, then demand for new capital equipment such as ours tends to be depressed. For example, sales of systems for magnetic disk production were depressed from late 2007 through 2009. The number of new systems delivered increased in 2010 as customers increased their production capacity in response to increased demand for data storage, but decreased in 2011 through 2015 as the hard disk drive industry did not add the same level of capacity that it did in 2010. We cannot predict with any certainty when these cycles will begin or end. Our sales of systems for magnetic disk production increased in 2016 as a customer began upgrading the technology level of its manufacturing capacity. Sales of systems and upgrades for magnetic disk production in 2017 and 2018 were higher than in 2016 as this customer’s technology upgrade continued.

Our equipment represents only a portion of the capital expenditure that our customers incur when they upgrade or add production capacity. Accordingly, our customers generally commit to making large capital expenditures far in excess of the cost of our systems alone when they decide to purchase our systems. The magnitude of these capital expenditures requires our customers to have access to large amounts of capital. Our customers generally reduce their level of capital investment during downturns in the overall economy or during a downturn in their industries.

In recent years the photovoltaic (solar) market has undergone a downturn, which is likely to impact our sales of PV equipment. The solar industry from time to time experiences periods of structural imbalance between supply and demand, and such periods put intense pressure on our customers’ pricing. The solar industry is currently in such a period. Competition in solar markets globally and across the solar value chain is intense, and could remain that way for an extended period of time. During any such period, solar module manufacturers may reduce their sales prices in response to competition, even below their manufacturing costs, in order to generate sales and may do so for a sustained period of time. As a result, our customers may be unable to sell their solar modules or systems at attractive prices or for a profit during a period of excess supply of solar modules, which would adversely affect their results of operations and their ability to make capital investments such as purchasing our products.

We must effectively manage our resources and production capacity to meet rapidly changing demand. Our business experiences rapid growth and contraction, which stresses our infrastructure, internal systems and managerial resources. During periods of increasing demand for our products, we must have sufficient manufacturing capacity and inventory to meet customer demand; attract, retain and motivate a sufficient number of qualified individuals; and effectively manage our supply chain. During periods of decreasing demand for our products, we must be able to align our cost structure with prevailing market conditions; motivate and retain key employees and effectively manage our supply chain.

Sales of our equipment are primarily dependent on our customers’ upgrade and capacity expansion plans and whether our customers select our equipment.

We have no control over our customers’ upgrade and capacity expansion plans, and we cannot be sure they will select, or continue to select, our equipment when they upgrade or expand their capacity. The sales cycle for our equipment systems can be a year or longer, involving individuals from many different areas of Intevac and numerous product presentations and demonstrations for our prospective customers. Our sales process also commonly includes production of samples and customization of our products. We do not typically enter into long-term contracts with our customers, and until an order is actually submitted by a customer there is no binding commitment to purchase our systems. In some cases orders are also subject to customer acceptance or other criteria even in the case of a binding agreement.

Sales of new manufacturing systems are also dependent on obsolescence and replacement of the installed base of our customers’ existing equipment with newer, more capable equipment. If upgrades are developed that extend the useful life of the

12

installed base of systems, then we tend to sell more upgrade products and fewer new systems, which can significantly reduce total revenue.

Our 200 Lean HDD customers also experience competition from companies that produce alternative storage technologies like flash memory, which offer smaller size, lower power consumption and more rugged designs. These storage technologies are being used increasingly in enterprise applications and smaller form factors such as tablets, smart-phones, ultra-books, and notebook PCs instead of hard disk drives. Tablet computing devices and smart-phones have never contained, nor are they likely in the future to contain, a disk drive. Products using alternative technologies, such as flash memory, optical storage and other storage technologies are becoming increasingly common and could become a significant source of competition to particular applications of the products of our 200 Lean HDD customers, which could adversely affect our results of operations. If alternative technologies, such as flash memory, replace hard disk drives as a significant method of digital storage, then demand for our hard disk manufacturing products would decrease.

The Photonics business is also subject to long sales cycles because many of its products, such as our military imaging products, often must be designed into the customers’ end products, which are often complex state-of-the-art products. These development cycles are typically multi-year, and our sales are contingent on our customers successfully integrating our product into their product, completing development of their product and then obtaining production orders for their product from the U.S. government or its allies.

We operate in an intensely competitive marketplace, and our competitors have greater resources than we do.

In the market for our disk sputtering systems, we experience competition primarily from Canon Anelva, which has sold a substantial number of systems worldwide. In the PV equipment market, Intevac faces competition from large established competitors including Applied Materials, Centrotherm Photovoltaics, Amtech, Jusung and Von Ardenne. In the market for our military imaging products we experience competition from companies such as Harris Corporation and L-3 Communications. Some of our competitors have substantially greater financial, technical, marketing, manufacturing and other resources than we do, especially in the DCP and PV equipment markets. Our competitors may develop enhancements to, or future generations of, competitive products that offer superior price or performance features, and new competitors may enter our markets and develop such enhanced products. Moreover, competition for our customers is intense, and our competitors have historically offered substantial pricing concessions and incentives to attract our customers or retain their existing customers.

Our growth depends on development of technically advanced new products and processes.

We have invested heavily, and continue to invest, in the development of new products, such as our 200 Lean HDD and other PVD systems, our coating systems for DCP, our solar systems for PV applications, our digital night-vision products and our near-eye display products. Our success in developing and selling new products depends upon a variety of factors, including our ability to: predict future customer requirements; make technological advances; achieve a low total cost of ownership for our products; introduce new products on schedule; manufacture products cost-effectively including transitioning production to volume manufacturing; commercialize and attain customer acceptance of our products; and achieve acceptable and reliable performance of our new products in the field. Our new product decisions and development commitments must anticipate continuously evolving industry requirements significantly in advance of sales. In addition, we are attempting to expand into new or related markets, including the PV and display cover glass markets. Our expansion into the PV and cover glass markets is dependent upon the success of our customers’ development plans. To date we have not recognized material revenue from such products. Failure to correctly assess the size of the markets, to successfully develop cost effective products to address the markets or to establish effective sales and support of the new products would have a material adverse effect on future revenues and profits. In addition, if we invest in products for which the market does not develop as anticipated, we may incur significant charges related to such investments.

Rapid technological change in our served markets requires us to rapidly develop new technically advanced products. Our future success depends in part on our ability to develop and offer new products with improved capabilities and to continue to enhance our existing products. If new products have reliability or quality problems, our performance may be impacted by reduced orders, higher manufacturing costs, delays in acceptance and payment for new products and additional service and warranty expenses.

We are exposed to risks associated with a highly concentrated customer base.

Historically, a significant portion of our revenue in any particular period has been attributable to sales of our disk sputtering systems to a limited number of customers. This concentration of customers, when combined with changes in the

13

customers’ specific capacity plans and market share shifts can lead to extreme variability in our revenue and financial results from period to period.

The concentration of our customer base may enable our customers to demand pricing and other terms unfavorable to Intevac, and makes us more vulnerable to changes in demand by or issues with a given customer. Orders from a relatively limited number of manufacturers have accounted for, and will likely continue to account for, a substantial portion of our revenues. The loss of one of these large customers, or delays in purchasing by them, could have a material and adverse effect on our revenues.

Our operating results fluctuate significantly from quarter to quarter, which can lead to volatility in the price of our common stock.

Our quarterly revenues and common stock price have fluctuated significantly. We anticipate that our revenues, operating margins and common stock price will continue to fluctuate for a variety of reasons, including: (1) changes in the demand, due to seasonality, cyclicality and other factors in the markets for computer systems, storage subsystems and consumer electronics containing disks as well as cell phones and PV solar cells our customers produce with our systems; (2) delays or problems in the introduction and acceptance of our new products, or delivery of existing products; (3) timing of orders, acceptance of new systems by our customers or cancellation or delay of those orders; (4) new products, services or technological innovations by our competitors or us; (5) changes in our manufacturing costs and operating expense; (6) changes in general economic, political, stock market and industry conditions; and (7) any failure of our operating results to meet the expectations of investment research analysts or investors.

Any of these, or other factors, could lead to volatility and/or a rapid change in the trading price of our common shares. In the past, securities class action litigation has been instituted against companies following periods of volatility in the market price of their securities. Any such litigation, if instituted against Intevac, could result in substantial costs and diversion of management time and attention.

We may not be able to obtain export licenses from the U.S. government permitting delivery of our products to international customers.

Many of our products, especially Photonics products, require export licenses from U.S. government agencies under the Export Administration Act, the Trading with the Enemy Act of 1917, the Arms Export Act of 1976 or the International Traffic in Arms Regulations. These regulations limit the potential market for some of our products. We can give no assurance that we will be successful in obtaining all the licenses necessary to export our products. Heightened government scrutiny of export licenses for defense related products has resulted in lengthened review periods for our license applications. Exports to countries that are not considered by the U.S. government to be allies are likely to be prohibited, and even sales to U.S. allies may be limited. Failure to comply with export control laws, including identification and reporting of all exports and re-exports of controlled technology or exports made without correct license approval or improper license use could result in severe penalties and revocation of licenses. Failure to obtain export licenses, delays in obtaining licenses, or revocation of previously issued licenses would prevent us from selling the affected products outside the United States and could negatively impact our results of operations.

The Photonics business is dependent on U.S. government contracts, which are subject to fixed pricing, immediate termination and a number of procurement rules and regulations.

We sell our Photonics products and services directly to the U.S. government, as well as to prime contractors for various U.S. government programs. The U.S government is considering significant changes in the level of existing, follow-on or replacement programs. We cannot predict the impact of potential changes in priorities due to military transformations and/or the nature of future war-related activities. A shift of government priorities to programs in which we do not participate and/or reductions in funding for or the termination of programs in which we do participate, unless offset by other programs and opportunities, could have a material adverse effect on our financial position, results of operations, or cash flows.

Funding of multi-year government programs is subject to congressional appropriations, and there is no guarantee that the U.S. government will make further appropriations. Sales to the U.S. government and its prime contractors may also be affected by changes in procurement policies, budget considerations and political developments in the United States or abroad. For example, if the U.S. government is less focused on defense spending or there is a decrease in hostilities, demand for our

14

products could decrease. The loss of funding for a government program would result in a loss of future revenues attributable to that program. The influence of any of these factors, which are beyond our control, could negatively impact our results of operations.

A significant portion of our U.S. government revenue is derived from fixed-price development and production contracts. Under fixed-price contracts, unexpected increases in the cost to develop or manufacture a product, whether due to inaccurate estimates in the bidding process, unanticipated increases in material costs, reduced production volumes, inefficiencies or other factors, are borne by us. We have experienced cost overruns in the past that have resulted in losses on certain contracts, and may experience additional cost overruns in the future. We are required to recognize the total estimated impact of cost overruns in the period in which they are first identified. Such cost overruns could have a material adverse effect on our results of operations.

Generally, government contracts contain provisions permitting termination, in whole or in part, without prior notice at the government’s convenience upon the payment of compensation only for work done and commitments made at the time of termination. We cannot ensure that one or more of the government contracts under which we, or our customers, operate will not be terminated under these circumstances. Also, we cannot ensure that we, or our customers, would be able to procure new government contracts to offset the revenues lost as a result of any termination of existing contracts, nor can we ensure that we, or our customers, will continue to remain in good standing as federal contractors.

As a U.S. government contractor we must comply with specific government rules and regulations and are subject to routine audits and investigations by U.S. government agencies. If we fail to comply with these rules and regulations, the results could include: (1) reductions in the value of our contracts; (2) reductions in amounts previously billed and recognized as revenue; (3) contract modifications or termination; (4) the assessment of penalties and fines; and (5) suspension or debarment from government contracting or subcontracting for a period of time or permanently.

Our business could be negatively impacted by cyber and other security threats or disruptions.

As a defense contractor, we face various cyber and other security threats, including espionage and attempts to gain unauthorized access to sensitive information and networks. Although we utilize various procedures and controls to monitor and mitigate the risk of these threats, there can be no assurance that these procedures and controls will be sufficient. These threats could lead to losses of sensitive information or capabilities; financial liabilities and damage to our reputation. If we are unable to maintain compliance with security standards applicable to defense contractors, we could lose business or suffer reputational harm.

Cyber threats to businesses in general are evolving and include, but are not limited to, malicious software, destructive malware, attempts to gain unauthorized access to data, disruption or denial of service attacks, and other electronic security breaches that could lead to disruptions in our systems, unauthorized release of confidential, personal or otherwise protected information (ours or that of our employees, customers or partners), and corruption of data, networks or systems. In addition, we could be impacted by cyber threats or other disruptions or vulnerabilities found in products we use or in our partners’ or customers’ systems that are used in connection with our business. These events, if not prevented or effectively mitigated, could damage our reputation, require remedial actions and lead to loss of business, regulatory actions, potential liability and other financial losses.

Changes to our effective tax rate affect our results of operations.

As a global company, we are subject to taxation in the United States, Singapore and various other countries. Significant judgment is required to determine and estimate worldwide tax liabilities. Our future effective tax rate could be affected by: (1) changes in tax laws; (2) the allocation of earnings to countries with differing tax rates; (3) changes in worldwide projected annual earnings in current and future years: (4) accounting pronouncements; or (5) changes in the valuation of our deferred tax assets and liabilities. Although we believe our tax estimates are reasonable, there can be no assurance that any final determination will not be different from the treatment reflected in our historical income tax provisions and accruals, which could result in additional payments by Intevac.

Our success depends on international sales and the management of global operations.

In previous years, the majority of our revenues have come from regions outside the United States. Most of our international sales are to customers in Asia, which includes products shipped to overseas operations of U.S. companies. We currently have

15

manufacturing facilities in California and Singapore and international customer support offices in Singapore, China, and Malaysia. We expect that international sales will continue to account for a significant portion of our total revenue in future years. Certain of our suppliers are also located outside the United States.

Managing our global operations presents challenges including, but not limited to, those arising from: (1) global trade issues; (2) variations in protection of intellectual property and other legal rights in different countries; (3) concerns of U.S. governmental agencies regarding possible national commercial and/or security issues posed by growing manufacturing business in Asia; (4) fluctuation of interest rates, raw material costs, labor and operating costs, and exchange rates; (5) variations in the ability to develop relationships with suppliers and other local businesses; (6) changes in the laws and regulations of the United States, including export restrictions, and other countries, as well as their interpretation and application; (7) the need to provide technical and spares support in different locations; (8) political and economic instability; (9) cultural differences; (10) varying government incentives to promote development; (11) shipping costs and delays; (12) adverse conditions in credit markets; (13) variations in tariffs, quotas, tax codes and other market barriers; and (14) barriers to movement of cash.

We must regularly assess the size, capability and location of our global infrastructure and make appropriate changes to address these issues.

Difficulties in integrating past or future acquisitions could adversely affect our business.

We have completed a number of acquisitions and dispositions during our operating history. We have spent and may continue to spend significant resources identifying and pursuing future acquisition opportunities. Acquisitions involve numerous risks including: (1) difficulties in integrating the operations, technologies and products of the acquired companies; (2) the diversion of our management’s attention from other business concerns; and (3) the potential loss of key employees of the acquired companies. Failure to achieve the anticipated benefits of the prior and any future acquisitions or to successfully integrate the operations of the companies we acquire could have a material and adverse effect on our business, financial condition and results of operations. Any future acquisitions could also result in potentially dilutive issuance of equity securities, acquisition or divestiture-related write-offs or the assumption of debt and contingent liabilities. In addition, we have made and will continue to consider making strategic divestitures. With any divestiture, there are risks that future operating results could be unfavorably impacted if targeted objectives, such as cost savings, are not achieved or if other business disruptions occur as a result of the divestiture or activities related to the divestiture.

Our success is dependent on recruiting and retaining a highly talented work force.

Our employees are vital to our success, and our key management, engineering and other employees are difficult to replace. We do not maintain key person life insurance on any of our employees. The expansion of high technology companies worldwide has increased demand and competition for qualified personnel, and has made companies increasingly protective of prior employees. It may be difficult for us to locate employees who are not subject to non-competition agreements and other restrictions.

The majority of our U.S. operations are located in California where the cost of living and of recruiting employees is high. Our operating results depend, in large part, upon our ability to retain and attract qualified management, engineering, marketing, manufacturing, customer support, sales and administrative personnel. Furthermore, we compete with industries such as the hard disk drive, semiconductor, and solar industries for skilled employees. Failure to retain existing key personnel, or to attract, assimilate or retain additional highly qualified employees to meet our needs in the future, could have a material and adverse effect on our business, financial condition and results of operations.

We are dependent on certain suppliers for parts used in our products.

We are a manufacturing business. Purchased parts constitute the largest component of our product cost. Our ability to manufacture depends on the timely delivery of parts, components and subassemblies from suppliers. We obtain some of the key components and subassemblies used in our products from a single supplier or a limited group of suppliers. If any of our suppliers fail to deliver quality parts on a timely basis, we may experience delays in manufacturing, which could result in delayed product deliveries, increased costs to expedite deliveries or develop alternative suppliers, or require redesign of our products to accommodate alternative suppliers. Some of our suppliers are thinly capitalized and may be vulnerable to failure.

16

Our business depends on the integrity of our intellectual property rights.

The success of our business depends upon the integrity of our intellectual property rights, and we cannot ensure that: (1) any of our pending or future patent applications will be allowed or that any of the allowed applications will be issued as patents or will issue with claims of the scope we sought; (2) any of our patents will not be invalidated, deemed unenforceable, circumvented or challenged; (3) the rights granted under our patents will provide competitive advantages to us; (4) other parties will not develop similar products, duplicate our products or design around our patents; or (5) our patent rights, intellectual property laws or our agreements will adequately protect our intellectual property or competitive position.

From time to time, we have received claims that we are infringing third parties’ intellectual property rights or seeking to invalidate our rights. We cannot ensure that third parties will not in the future claim that we have infringed current or future patents, trademarks or other proprietary rights relating to our products. Any claims, with or without merit, could be time-consuming, result in costly litigation, cause product shipment delays or require us to enter into royalty or licensing agreements. Such royalty or licensing agreements, if required, may not be available on terms acceptable to us.

We could be involved in litigation.

From time to time we may be involved in litigation of various types, including litigation alleging infringement of intellectual property rights and other claims and customer disputes. Litigation is expensive, subjects us to the risk of significant damages and requires significant management time and attention and could have a material and adverse effect on our business, financial condition and results of operations.

We are subject to risks of non-compliance with environmental and other governmental regulations.

We are subject to a variety of governmental regulations relating to the use, storage, discharge, handling, emission, generation, manufacture, treatment and disposal of toxic or otherwise hazardous substances, chemicals, materials or waste. If we fail to comply with current or future regulations, such failure could result in suspension of our operations, alteration of our manufacturing process, remediation costs or substantial civil penalties or criminal fines against us or our officers, directors or employees. Additionally, these regulations could require us to acquire expensive remediation or abatement equipment and incur substantial expenses to comply with them.

Business interruptions could adversely affect our operations.

Our operations are vulnerable to interruption by fire, earthquake, floods or other natural disaster, quarantines or other disruptions associated with infectious diseases, national catastrophe, terrorist activities, war, disruptions in our computing and communications infrastructure due to power loss, telecommunications failure, human error, physical or electronic security breaches and computer viruses, and other events beyond our control. We do not have a detailed disaster recovery plan. Despite our implementation of network security measures, our tools and servers may be vulnerable to computer viruses, break-ins and similar disruptions from unauthorized tampering with our computer systems and tools located at customer sites. Political instability could cause us to incur increased costs in transportation, make such transportation unreliable, increase our insurance costs or cause international currency markets to fluctuate. All these unforeseen disruptions and instabilities could have the same effects on our suppliers and their ability to timely deliver their products. In addition, we do not carry sufficient business interruption insurance to compensate us for all losses that may occur, and any losses or damages incurred by us could have a material adverse effect on our business and results of operations. For example, we self-insure earthquake risks because we believe this is the prudent financial decision based on the high cost of the limited coverage available in the earthquake insurance market. An earthquake could significantly disrupt our operations, most of which are conducted in California. It could also significantly delay our research and engineering effort on new products, most of which is also conducted in California. We take steps to minimize the damage that would be caused by business interruptions, but there is no certainty that our efforts will prove successful.

We could be negatively affected as a result of a proxy contest and the actions of activist stockholders.

A proxy contest with respect to election of our directors, or other activist stockholder activities, could adversely affect our business because: (1) responding to a proxy contest and other actions by activist stockholders can be costly and time-consuming, disruptive to our operations and divert the attention of management and our employees; (2) perceived uncertainties as to our future direction caused by activist activities may result in the loss of potential business opportunities, and may make it more difficult to attract and retain qualified personnel and business partners; and (3) if individuals are elected to our Board of Directors with a specific agenda, it may adversely affect our ability to effectively and timely implement our strategic plans.

17

We are required to evaluate our internal control over financial reporting under Section 404 of the Sarbanes-Oxley Act of 2002, and any adverse results from such evaluation could result in a loss of investor confidence in our financial reports and have an adverse effect on our stock price.

Pursuant to Section 404 of the Sarbanes-Oxley Act of 2002, our management must perform evaluations of our internal control over financial reporting. Beginning in 2004, our Form 10-K has included a report by management of their assessment of the adequacy of such internal control. Additionally, our independent registered public accounting firm must publicly attest to the effectiveness of our internal control over financial reporting. We have completed the evaluation of our internal controls over financial reporting as required by Section 404 of the Sarbanes-Oxley Act. Although our assessment, testing, and evaluation resulted in our conclusion that as of December 29, 2018, our internal controls over financial reporting were effective, we cannot predict the outcome of our testing in future periods. Ongoing compliance with this requirement is complex, costly and time-consuming. If Intevac fails to maintain effective internal control over financial reporting; our management does not timely assess the adequacy of such internal control; or our independent registered public accounting firm does not deliver an unqualified opinion as to the effectiveness of our internal control over financial reporting, then we could be subject to restatement of previously reported financial results, regulatory sanctions and a decline in the public’s perception of Intevac, which could have a material and adverse effect on our business, financial condition and results of operations.

None.

Intevac maintains its corporate headquarters in Santa Clara, California. The location, approximate size and type of facility of the principal properties are listed below. Intevac leases all of its properties and does not own any real estate.

Intevac considers these properties adequate to meet its current and future requirements. Intevac regularly assesses the size, capability and location of its global infrastructure and periodically makes adjustments based on these assessments.

From time to time, Intevac is involved in claims and legal proceedings that arise in the ordinary course of business. Intevac expects that the number and significance of these matters will increase as Intevac’s business expands. Any claims or proceedings against us, whether meritorious or not, could be time consuming, result in costly litigation, require significant amounts of management time, result in the diversion of significant operational resources, or require us to enter into royalty or licensing agreements which, if required, may not be available on terms favorable to us or at all. Intevac is not presently a party to any lawsuit or proceeding that, in Intevac’s opinion, is likely to seriously harm Intevac’s business.

Not applicable.

18

PART II

Market Information

Intevac common stock is traded on The Nasdaq Stock Market (NASDAQ Global Select) under the symbol “IVAC.” As of February 13, 2019, there were 79 holders of record.

Recent Sales of Unregistered Securities

None.

Repurchases of Intevac Common Stock

On November 21, 2013, Intevac’s Board of Directors approved a stock repurchase program authorizing up to $30.0 million in repurchases. On August 15, 2018, Intevac’s Board of Directors approved a $10.0 million increase to the original stock repurchase program authorizing up to $40.0 million. At December 29, 2018, $10.9 million remains available for future stock repurchases under the repurchase program.

The following table provides information as of December 29, 2018 with respect to the shares of common stock repurchased by Intevac during the fourth quarter of fiscal 2018.

Equity Plan Information

The following table summarizes the number of outstanding options and RSUs granted to employees and directors, as well as the number of securities remaining available for future issuance, under Intevac’s equity compensation plans at December 29, 2018.

Not applicable for smaller reporting companies.

19

Management’s Discussion and Analysis (MD&A) is intended to facilitate an understanding of Intevac’s business and results of operations. This MD&A should be read in conjunction with Intevac’s Consolidated Financial Statements and the accompanying Notes to Consolidated Financial Statements included elsewhere in this Form 10- K. The following discussion contains forward-looking statements and should also be read in conjunction with the cautionary statement set forth at the beginning of this Form 10-K. MD&A includes the following sections:

Overview

Intevac is a provider of vacuum deposition equipment for a wide variety of thin-film applications, and a leading provider of digital night-vision technologies and products to the defense industry. The Company leverages its core capabilities in high-volume manufacturing of small substrates to provide process manufacturing equipment solutions to the HDD, DCP, and solar cell industries. Intevac also provides sensors, cameras and systems for government applications such as night vision and long-range target identification. Intevac’s customers include manufacturers of hard disk media, DCPs and solar cells as well as the U.S. government and its agencies, allies and contractors. Intevac reports two segments: TFE and Photonics.

Product development and manufacturing activities occur in North America and Asia. Intevac has field offices in Asia to support its TFE customers. Intevac’s products are highly technical and are sold primarily through Intevac’s direct sales force. Intevac also sells its products through distributors in Japan and China.

Intevac’s results are driven by a number of factors including success in its equipment growth initiatives in the DCP and solar markets and by worldwide demand for HDDs. Demand for HDDs depends on the growth in digital data creation and storage, the rate of areal density improvements, the end-user demand for PCs, enterprise data storage, nearline “cloud” applications, video players and video game consoles that include such drives. Intevac continues to execute its strategy of equipment diversification into new markets by introducing new products, such as for a thin-film PVD application for protective coating for DCP manufacturing and a thin-film PVD application for PV solar cell manufacturing. Intevac believes that expansion into these markets will result in incremental equipment revenues for Intevac and decrease Intevac’s dependence on the HDD industry. Intevac’s equipment business is subject to cyclical industry conditions, as demand for manufacturing equipment and services can change depending on supply and demand for HDDs, cell phones, and PV cells as well as other factors such as global economic conditions and technological advances in fabrication processes.

Fiscal 2017 financial results reflected an improved environment and the Company returned to profitability. Intevac recognized revenue on six 200 Lean HDD systems as one of our HDD customers upgraded the technology level of its manufacturing capacity. In 2017, Intevac recognized revenue on four VERTEX coating system for DCPs, one MATRIX implant pilot system and two ENERGi implant systems for solar cell manufacturing. In 2017 Intevac shipped an additional three

20

ENERGi implant systems which were installed in fiscal 2018. In fiscal 2017, lower Photonics’ product sales were offset by higher Photonics’ contract R&D. Photonics margins and operating results were negatively impacted by a higher-mix of lower margin technology development contracts versus product sales. The fiscal 2017 net income reflected higher net revenues and higher gross margins, offset in part by higher operating expenses as the Company recorded higher variable compensation expenses as a result of the return to profitability. During fiscal 2017, the Company did not recognize an income tax benefit on its U.S. net operating loss.

Fiscal 2018 HDD equipment sales were at the same levels as 2017 as our HDD customers took delivery of fewer systems but more upgrades. Intevac recognized revenue on four 200 Lean HDD systems with an additional six in backlog at the end of the year as our HDD customer upgraded the technology level of their manufacturing capacity. In 2018, Intevac recognized revenue on the three ENERGi implant systems shipped in the previous year with an additional nine in backlog at the end of the year. In fiscal 2018, Photonics business levels were lower compared to the prior year with lower Photonics’ product sales, offset in part by higher Photonics’ contract R&D. Photonics continued to deliver production shipments of the night-vision camera modules for the F35 Joint Strike Fighter program in fiscal 2018. With the completion of the Apache program in 2017, the Photonics revenue profile moved from a product-driven one to a funded R&D revenue profile. Photonics margins and operating results were negatively impacted by a higher-mix of lower margin technology development contracts versus product sales. Fiscal 2018 net income reflected recognition of an income tax benefit and lower operating expenses due to cost containment activities put in place in the first quarter of fiscal 2018, offset in part by lower net revenues and lower gross margins. During fiscal 2018, the Company reversed the valuation allowance recorded against the deferred tax assets related to its Singapore operations. This reversal resulted in the recognition of a non-cash income tax benefit of $7.9 million. During fiscal 2018, the Company did not recognize an income tax benefit on its U.S. net operating loss.

We believe that we will be profitable in fiscal 2019. Intevac expects that HDD equipment sales will be similar to slightly down from the levels in 2018 as a HDD manufacturer may take delivery of only four of the six 200 Lean HDD systems in backlog. In 2019, we expect additional 200 Lean HDD system orders. In 2019, Intevac expects higher sales of new TFE products as we expect follow on production orders for our VERTEX coating system for DCPs and we recognize revenue on the nine ENERGi implant systems that are in backlog. Four of the nine systems in backlog at the end of 2018 were shipped in January 2019. In 2019, we expect increased product shipments in Photonics as shipments for the Apache camera will resume and we will continue to deliver production shipments of the night-vision camera modules for the F35 Joint Strike Fighter program. In 2019, we expect increased contract R&D revenue as development work begins on the multi-year $28.6 million contract award for the development and production of digital night-vision cameras to support the U.S. Army’s IVAS program. For fiscal 2019, Intevac expects that Photonics profits will be higher than fiscal 2018 as Photonics results will reflect higher revenue levels.

Results of Operations

Net revenues

Net revenues consist primarily of sales of equipment used to manufacture thin-film disks, PV cells, DCPs and related equipment and system components; sales of low-light imaging products; and revenue from contract R&D related to the development of electro-optical sensors, cameras and systems.

The decrease in TFE revenues in fiscal 2018 versus fiscal 2017 was due primarily to lower systems sales as TFE recognized revenue on four 200 Lean HDD systems and three solar implant ENERGi systems, offset in part by increases in revenue recognized on technology upgrades and spare parts. In fiscal 2017, TFE revenue recognized six 200 Lean HDD systems, four VERTEX coating system for DCPs, two solar implant ENERGi systems, and a MATRIX implant pilot system as well as technology upgrades and spare parts.

21

Photonics revenues decreased by 23.9% to $25.8 million in fiscal 2018 versus fiscal 2017. Photonics product revenue decreased in fiscal 2018 versus fiscal 2017 due to lower shipments as a result of the completion of the multi-year Apache arrangement in the third quarter of fiscal 2017 and lower unit shipments for the F35 Joint Strike Fighter program night-vision camera. Contract R&D revenue in fiscal 2018 increased as a result of a higher volume of contracts.

Backlog

TFE backlog at December 29, 2018 included six 200 Lean HDD systems and nine ENERGi solar ion implant systems. TFE backlog at December 30, 2017 included three 200 Lean HDD systems and twelve ENERGi solar ion implant systems.

Significant portions of Intevac’s revenues in any particular period have been attributable to sales to a limited number of customers. The following customers accounted for at least 10 percent of Intevac’s consolidated net revenues in fiscal 2018 and 2017.

Revenue by geographic region

International sales include products shipped to overseas operations of U.S. companies. The decrease in sales to the U.S. region in 2018 versus 2017 reflected lower Photonics product sales, offset in part by higher Photonics contract R&D work. There were no TFE systems sold to factories in the U.S. in 2018 or 2017.

The decrease in sales to the Asia region in 2018 versus 2017 reflected lower system sales, offset in part by increased technology upgrade and spare parts sales. Sales to the Asia region in 2018 included four 200 Lean HDD systems and three solar implant ENERGi systems. Sales to the Asia region in 2017 included six 200 Lean HDD systems, four VERTEX coating systems for DCP, one pilot MATRIX solar ion implant system and two ENERGi solar ion implant systems.

Sales to the Europe region in 2018 and 2017 primarily relate to near-eye displays sold to a NATO customer.

Rest of World includes contract R&D for the Australian government as part of a program under the Department of Defense’s Coalition Warfare Program which is funded by the U.S. government and several foreign nation coalition partners.

22

Gross margin

Cost of net revenues consists primarily of purchased materials and costs attributable to contract R&D, and also includes assembly, test and installation labor and overhead, customer-specific engineering costs, warranty costs, royalties, provisions for inventory reserves and scrap.

TFE gross margin was 36.5% in fiscal 2018 compared to 42.7% in fiscal 2017. Fiscal 2018 gross margins declined over fiscal 2017 due primarily to lower revenue levels, lower factory utilization and higher provisions for inventory reserves. TFE gross margin in fiscal 2017 reflects the release of $2.2 million in previously-recognized inventory provisions upon the sale of two ENERGi solar ion implant systems, offset in part by the lower margin on the pilot MATRIX solar ion implant system. Gross margins in the TFE business vary depending on a number of factors, including product mix, product cost, system configuration and pricing, factory utilization, and provisions for excess and obsolete inventory.

Photonics gross margin was 28.6% in fiscal 2018 compared to 35.2% in fiscal 2017. Fiscal 2018 gross margins declined over fiscal 2017 due primarily to a higher mix of lower-margin contract R&D versus product sales, lower margins on contract R&D and loss provisions recorded on firm fixed priced (“FFP”) contracts. Manufacturing costs for digital night-vision products decreased in fiscal 2018 and 2017 as a result of cost reductions and yield improvements.

Research and development

Research and development expense consists primarily of salaries and related costs of employees engaged in and prototype materials used in ongoing research, design and development activities for PV cell manufacturing equipment, DCP manufacturing equipment, HDD disk sputtering equipment and Photonics products.

TFE research and development spending in fiscal 2018 was flat compared to fiscal 2017.

Research and development spending for Photonics decreased during 2018 as compared to fiscal 2017. Research and development expenses do not include costs of $9.1 million and $7.1 million in 2018 and 2017, respectively, which are related to customer-funded contract R&D programs and therefore included in cost of net revenues.

Selling, general and administrative

Selling, general and administrative expense consists primarily of selling, marketing, customer support, financial and management costs. All domestic sales and the majority of international sales of HDD disk sputtering products in Asia are made through Intevac’s direct sales force. Intevac also sells its TFE products through distributors in Japan and China. Intevac has offices in Singapore, Malaysia and China to support Intevac’s TFE customers in Asia.

23

Selling, general and administrative expenses decreased in 2018 over the amount spent in 2017 due to cost control initiatives implemented in the first quarter of fiscal 2018, lower variable compensation costs, lower legal expenses for patent applications and lower spending for strategic consulting.

Acquisition-related (benefit), net

Acquisition-related (benefit), net, represents the change in the fair value of contingent consideration arrangements related to the SIT acquisition. See Note 8 “Contingent Consideration” in the notes to the consolidated financial statements for additional information related to the fair value of contingent consideration. Increases in the assessed likelihood of a higher payout under a contingent consideration arrangement contribute to increases in the fair value of the related liability. Conversely, decreases in the assessed likelihood of a higher payout under a contingent consideration arrangement contribute to decreases in the fair value of the related liability.

The benefits recognized during fiscal 2018 and fiscal 2017 are associated with changes in the fair value of the contingent consideration related to the revenue earnout obligation. We recorded liabilities on our consolidated balance sheet of $4.1 million as of the original acquisition date for this contingent consideration arrangement and subsequently remeasured the liability to fair value, with changes in fair value reported in earnings. As a result of this remeasurement, we recorded a net gain of $139,000 and $223,000, respectively during fiscal 2018 and fiscal 2017.

Cost reduction plan

During the first quarter of fiscal 2018, Intevac substantially completed implementation of the 2018 cost reduction plan (the “2018 Plan”), which reduced expenses and reduced its workforce by 6 percent. The total cost of implementing the 2018 Plan was $95,000 of which $61,000 was reported under cost of net revenues and $34,000 was reported under operating expenses. Substantially all cash outlays in connection with the 2018 Plan were completed in fiscal 2018. Implementation of the 2018 Plan reduced salary, wages and other employee-related expenses by approximately $1.8 million on an annual basis.

Interest income and other income (expense), net

Interest income and other, net in fiscal 2018 included $516,000 of interest income on investments and $135,000 earnout income from a divestiture, offset in part by $80,000 of foreign currency losses. Interest income and other, net in fiscal 2017 included $291,000 of interest income on investments and $115,000 earnout income from a divestiture, offset in part by $107,000 of foreign currency losses. The increase in interest income in 2018 over 2017 reflected higher interest rates on Intevac’s investments, offset in part by lower invested balances.

Provision for (benefit from) income taxes

During fiscal 2018 the Company reversed the valuation allowance recorded against the deferred tax assets related to its Singapore operations. This reversal resulted in the recognition of a non-cash income tax benefit of $7.9 million.

24

Intevac’s effective income tax rate was 199.6% for fiscal 2018 and 21.1% for fiscal 2017. Our effective income tax rate in 2018, excluding the impact of the reduction in our deferred income tax asset valuation allowance was (20.4%). Intevac’s tax rate differs from the applicable statutory rates due primarily to establishment and reversal of a valuation allowance, the utilization of deferred and current credits and the effect of permanent differences and adjustments of prior permanent differences. Intevac’s future effective income tax rate depends on various factors including, the level of Intevac’s projected earnings, the geographic composition of worldwide earnings, tax regulations governing each region, net operating loss carry forwards, availability of tax credits and the effectiveness of Intevac’s tax planning strategies. Management carefully monitors these factors and timely adjusts the effective income tax rate accordingly.

On December 22, 2017, the Tax Cuts and Jobs Act (“Tax Reform”) was signed into law that significantly reforms the Internal Revenue Code of 1986, as amended. Tax Reform, among other things, permanently lowered the U.S. federal tax rate to 21% from the then existing maximum rate of 35%, allowed for the expensing of capital expenditures, and put into effect the migration from a “worldwide” system of taxation to a territorial system. In fiscal 2017 we revalued our net deferred tax assets and liabilities at the newly enacted U.S. federal tax rate. At December 29, 2018, we have now completed our accounting for all of the enactment-date income tax effects of Tax Reform. There was no material impact to our tax expense in fiscal 2018 or fiscal 2017, related to Tax Reform.

In fiscal 2014, a valuation allowance of $9.4 million was established to record the portion of the Singapore deferred tax asset. The Company concluded that, as of December 29, 2018, it is more likely than not that the Company will generate sufficient taxable income in Singapore to realize its deferred tax assets and reversed the valuation allowance during the fourth quarter of 2018. This reversal resulted in the recognition of a non-cash income tax benefit of $7.9 million for fiscal 2018. The Company has considered all positive and negative evidence regarding the ability to fully realize the deferred tax asset, including past operating results and the forecast of future taxable income. This conclusion, and the resulting reversal of the deferred tax asset valuation allowance, is based upon consideration of a number of factors, including the Company’s completion of 7 consecutive quarters of profitability and its forecast of future profitability under multiple scenarios that support the utilization of net operating loss carryforwards. After recognizing the reversal, the Company does not have a remaining valuation allowance against the deferred tax assets in Singapore at December 29, 2018. The Company recorded a valuation allowance decrease of $603,000 for fiscal 2017.

In fiscal 2012, a valuation allowance of $23.4 million was added to record only the portion of the U.S. federal deferred tax asset that more likely than not will be realized. In fiscal 2018, a valuation allowance increase of $930,000 was recorded for the U.S. federal deferred tax assets, and in fiscal 2017, a valuation allowance decrease of $6.9 million was recorded for the U.S. federal deferred tax assets. The fiscal 2017 decrease was a result of revaluing our deferred tax assets and liabilities at the newly enacted U.S federal tax rate. The amount of the deferred tax asset considered realizable, however, could be adjusted if estimates of future taxable income during the carryforward period are increased, or if objective negative evidence in the form of cumulative losses is no longer present and additional weight may be given to subjective evidence such as our projections for growth.

Liquidity and Capital Resources

At December 29, 2018, Intevac had $40.3 million in cash, cash equivalents, restricted cash and investments compared to $43.5 million at December 30, 2017. During fiscal 2018, cash, cash equivalents, restricted cash and investments decreased by $3.2 million due primarily to cash used by operating activities, repurchases of common stock, purchases of fixed assets and tax payments related to the net share settlement of restricted stock units, partially offset by cash received from the sale of Intevac common stock to Intevac’s employees through Intevac’s employee benefit plans.

Cash, cash equivalents, restricted cash and investments consist of the following:

25

Cash used in operating activities totaled $1.7 million in 2018 and $2.4 million in 2017. Improved operating cash flow in 2018 was a result of improved working capital, offset in part by reporting a loss from operations.

Accounts receivable totaled $27.7 million at December 29, 2018 compared to $20.5 million at December 30, 2017. At December 29, 2018 customer advances for products that had not been shipped to customers and included in accounts receivable were $3.7 million. The number of days outstanding for Intevac’s accounts receivable was 78 at December 29, 2018 compared to 74 at December 30, 2017. Net inventories totaled $30.6 million at December 29, 2018 compared to $33.8 million at December 30, 2017. Net inventories at December 29, 2018 include three ENERGi implant systems in finished goods and one ENERGi implant system in work in process that are virtually complete and shipped to the customer in January 2019. At December 29, 2018 net inventories include an additional five ENERGi implant systems in work in process that are partially built. Net inventories at December 30, 2017 include three ENERGi implant systems at a customer site for which installation procedures had not begun and four ENERGi implant systems in work in process that were virtually complete, pending customer shipment. Inventory turns were 1.5 in fiscal 2018 and were 1.8 in fiscal 2017. Accounts payable increased to $6.1 million at December 29, 2018 compared to $3.9 million at December 30, 2017 to support increased manufacturing activities. Other accrued liabilities decreased to $5.0 million at December 29, 2018 compared to $7.7 million at December 30, 2017. Other accrued liabilities at December 29, 2018 included $1.1 million in deferred revenue related to the recognition of the ASC 606 transition adjustment. Other accrued liabilities at December 30, 2017 included $5.1 million in deferred revenue related to three ENERGi implant systems at a customer site. Accrued payroll and related liabilities decreased to $4.7 million at December 29, 2018 compared to $6.8 million at December 30, 2017 as a result of lower variable compensation accruals. Customer advances increased from $11.0 million at December 30, 2017 to $14.3 million at December 29, 2018.

Investing activities used cash of $1.0 million in 2018 and $5.8 million in 2017. Proceeds from sales and maturities of investments net of purchases of investments, totaled $2.2 million in 2018. Purchases of investments net of proceeds from sales and maturities of investments, totaled $1.4 million in 2017. Capital expenditures were $3.2 million in 2018 and $4.4 million in 2017.

Financing activities generated cash of $1.8 million in 2018 and $256,000 in 2017. The sale of Intevac common stock to Intevac’s employees through Intevac’s employee benefit plans provided $3.2 million in 2018 and $2.4 million in 2017. Tax payments related to the net share settlement of restricted stock units were $831,000 in 2018 and $2.0 million in 2017. In November 2013, Intevac’s Board of Directors approved a stock repurchase program authorizing up to $30 million in repurchases. On August 15, 2018, Intevac’s Board of Directors approved a $10.0 million increase to the original stock repurchase program authorizing up to $40.0 million in repurchases. Cash used to repurchase common stock totaled $558,000 in 2018.

In connection with the acquisition of SIT, Intevac agreed to pay to the selling shareholders in cash a revenue earnout on Intevac’s net revenue from commercial sales of certain solar implant products over a specified period up to an aggregate of $9.0 million. Payments made associated with the revenue earnout obligation were $174,000 in 2017.

Intevac’s investment portfolio consists principally of investment grade money market mutual funds, U.S. treasury and agency securities, certificates of deposit, commercial paper, municipal bonds and corporate bonds. Intevac regularly monitors the credit risk in its investment portfolio and takes measures, which may include the sale of certain securities, to manage such risks in accordance with its investment policies.

As of December 29, 2018, approximately $13.9 million of cash and cash equivalents and $1.3 million of short term investments were domiciled in foreign tax jurisdictions. Intevac expects a significant portion of these funds to remain off shore in the short term. If the Company chose to repatriate these funds to the United States, it would be required to accrue and pay additional taxes on any portion of the repatriation subject to foreign withholding taxes.

Intevac believes that its existing cash, cash equivalents and investments will be sufficient to meet Intevac’s cash requirements for the next 12 months. Intevac intends to undertake approximately $6.0 million to $8.0 million in capital expenditures during the next 12 months.

Off-Balance Sheet Arrangements

Off-balance sheet firm commitments relating to outstanding letters of credit amounted to approximately $1.2 million as of December 29, 2018. These letters of credit and bank guarantees are collateralized by $1.2 million of restricted cash. We do not maintain any other off-balance sheet arrangements, transactions, obligations, or other relationships that would be expected to have a material current or future effect on the consolidated financial statements.

26

Critical Accounting Policies

The preparation of consolidated financial statements and related disclosures in conformity with accounting principles generally accepted in the United States of America requires management to make judgments, assumptions and estimates that affect the amounts reported. Note 1 of Notes to Consolidated Financial Statements describes the significant accounting policies used in the preparation of the consolidated financial statements. Certain of these significant accounting policies are considered to be critical accounting policies.

A critical accounting policy is defined as one that is both material to the presentation of Intevac’s consolidated financial statements and requires management to make difficult, subjective or complex judgments that could have a material effect on Intevac’s financial condition or results of operations. Specifically, these policies have the following attributes: (1) Intevac is required to make assumptions about matters that are highly uncertain at the time of the estimate; and (2) different estimates Intevac could reasonably have used, or changes in the estimate that are reasonably likely to occur, would have a material effect on Intevac’s financial condition or results of operations.

Estimates and assumptions about future events and their effects cannot be determined with certainty. Intevac bases its estimates on historical experience and on various other assumptions believed to be applicable and reasonable under the circumstances. These estimates may change as new events occur, as additional information is obtained and as Intevac’s operating environment changes. These changes have historically been minor and have been included in the consolidated financial statements as soon as they became known. In addition, management is periodically faced with uncertainties, the outcomes of which are not within its control and will not be known for prolonged periods of time. These uncertainties are discussed in the section above entitled “Risk Factors.” Based on a critical assessment of its accounting policies and the underlying judgments and uncertainties affecting the application of those policies, management believes that Intevac’s consolidated financial statements are fairly stated in accordance with accounting principles generally accepted in the United States of America, and provide a meaningful presentation of Intevac’s financial condition and results of operations.

Management believes that the following are critical accounting policies:

Revenue Recognition

On December 31, 2017, we adopted the new accounting standard ASC 606, Revenue from Contracts with Customers and all the related amendments (“new revenue standard”) to all contracts using the modified retrospective method. We recognized the cumulative effect of initially applying the new revenue standard as an adjustment to the opening balance of the accumulated deficit. The comparative information has not been restated and continues to be reported under the accounting standards in effect for those periods. We expect the impact of the adoption of the new standard to be immaterial to our net income on an ongoing basis.

In our TFE segment, a majority of our equipment sales revenue continues to be recognized when products are shipped from our manufacturing facilities. Revenue recognition for our equipment sales arrangements, which includes systems, technology upgrades, service and spare parts, remains materially consistent with our historical practice.

Under the new revenue standard, in our TFE segment, we recognize revenue for equipment sales at a point in time following the transfer of control of such products to the customer, which typically occurs upon shipment or delivery depending on the terms of the underlying contracts. Our contracts with customers may include multiple performance obligations. For such arrangements, under the new revenue standard we allocate revenue to each performance obligation based on its relative standalone selling price. We generally determine standalone selling prices based on the prices charged to customers or by using expected cost plus margin. Under the new revenue standard, the expected costs associated with our base warranties continue to be recognized as expense when the equipment is sold.

Under the new revenue standard, in our Photonics segment, we recognize revenue for cost plus fixed fee (“CPFF”) and FFP government contracts over time under the cost-to-cost method for the majority of our government contracts, which is consistent with our historical revenue recognition model. Revenue on the majority of our government contracts will continue to be recognized over time because of the continuous transfer of control to the customer. For U.S. government contracts, this continuous transfer of control to the customer is supported by clauses in the contract that allow the customer to unilaterally terminate the contract for convenience, pay us for costs incurred plus a reasonable profit and take control of any work in process. Similarly, for non-U.S. government contracts, the customer typically controls the work in process as evidenced either

27

by contractual termination clauses or by our rights to payment for work performed to date to deliver products or services that do not have an alternative use to the Company. Under the new standard, the cost-to-cost measure of progress continues to best depict the transfer of control of assets to the customer, which occurs as we incur costs.

The majority of our contracts in our Photonics segment have a single performance obligation as the promise to transfer the individual goods or services is not separately identifiable from other promises in the contracts and, therefore, not distinct. Some of our contracts have multiple performance obligations, most commonly due to the contract covering multiple phases of the product lifecycle (development and production). For contracts with multiple performance obligations, we allocate the contract’s transaction price to each performance obligation using our best estimate of the standalone selling price of each distinct good or service in the contract. The primary method used to estimate standalone selling price is the expected cost plus a margin approach, under which we forecast our expected costs of satisfying a performance obligation and then add an appropriate margin for that distinct good or service.

Under the new revenue standard, in our Photonics segment, we recognize revenue for homogenous manufactured military products sold to the U.S. government and its contractors over time under the units-of-delivery method because of the continuous transfer of control to the customer. Intevac believes that the units-of-delivery method is an appropriate measure for measuring progress for the manufactured units as an equal amount of value is individually transferred to the customer upon delivery. The Company previously recognized revenue for substantially all manufactured military products sold to the U.S. government and its contractors when the customers took delivery of the products, which was generally upon shipment.

The nature of our contracts in our Photonics segment gives rise to several types of variable consideration including tiered pricing. Allocation of contract revenues among Photonics military products, and the timing of the recognition of those revenues, is impacted by agreements with tiered pricing or variable rate structures. We include variable consideration in the estimated transaction price when there is a basis to reasonably estimate the amount of the consideration. These estimates are based on historical experience, anticipated performance and our best judgment at the time. Because of our certainty in estimating these amounts, they are included in the transaction price of our contracts and the associated remaining performance obligations.

Accounting for CPFF and FFP contracts and programs involves the use of various techniques to estimate total contract revenue and costs. For these contracts, we estimate the profit on a contract as the difference between the total estimated revenue and expected costs to complete a contract and recognize that profit over the life of the contract. Contract estimates are based on various assumptions to project the outcome of future events. These assumptions include the complexity of the work to be performed; the cost and availability of materials; the performance of subcontractors; and the availability and timing of funding from the customer.

As a significant change in one or more of these estimates could affect the profitability of our contracts, we review and update our contract-related estimates regularly. We recognize adjustments in estimated profit on contracts under the cumulative catch-up method. Under this method, the impact of the adjustment on profit recorded to date on a contract is recognized in the period the adjustment is identified. Revenue and profit in future periods of contract performance are recognized using the adjusted estimate. If at any time the estimate of contract profitability indicates an anticipated loss on the contract, we recognize the total loss in the quarter it is identified.

Prior to December 31, 2017, Intevac recognized revenue when persuasive evidence of an arrangement existed, delivery had occurred and title and risk of loss had passed to Intevac’s customer or services had been rendered, the price was fixed or determinable, and collectibility was reasonably assured. Intevac’s revenue recognition policy generally resulted in revenue recognition at the following points: (1) for all transactions where legal title passed to the customer upon shipment, Intevac recognized revenue upon shipment for all products that had been demonstrated to meet product specifications prior to shipment; the portion of revenue associated with certain installation-related tasks was deferred, and that revenue was recognized upon completion of the installation-related tasks; (2) for products that had not been demonstrated to meet product specifications prior to shipment, revenue was recognized at customer acceptance; and (3) for arrangements containing multiple elements, the revenue relating to the undelivered elements was deferred until delivery of the deferred elements. When a sales arrangement contained multiple elements, Intevac allocated revenue to each element based on a selling price hierarchy. The selling price for a deliverable was based on its vendor specific evidence (“VSOE”) if available, third party evidence (“TPE”) if VSOE was not available, or best estimate of selling price (“ESP”) if neither VSOE nor TPE was available. Intevac generally utilized the ESP due to the nature of its products. In certain cases, technology upgrade sales were accounted for as multiple-element arrangements, usually split between delivery of the parts and installation on the customer’s systems. In these cases, Intevac recognized revenue for the relative sales price of the parts upon shipment and transfer of title, and recognized revenue for the

28

relative sales price of installation services when those services were completed. Revenue related to sales of spare parts was generally recognized upon shipment. Intevac recognized revenue in certain circumstances before delivery had occurred (commonly referred to as bill and hold transactions). In such circumstances, among other things, risk of ownership had passed to the customer, the customer had made a written fixed commitment to purchase the finished goods, the customer had requested the finished goods be held for future delivery as scheduled and designated by them, and no additional performance obligations existed by Intevac. For those transactions, the finished goods were segregated from inventory and normal billing and credit terms granted. Revenue related to services was generally recognized upon completion of the services. In addition, Intevac used the installment method to record revenue based on cash receipts in situations where the account receivable was collected over an extended period of time and in management’s judgment the degree of collectibility was uncertain.

Revenue on CPFF contracts was recognized to the extent of costs actually incurred plus a proportionate amount of the fee earned. Intevac considered fixed fees under CPFF contracts to be earned in proportion to the allowable costs actually incurred in performance of the contract. Revenue on FFP contracts was recognized on a milestone method or percentage-of-completion method of contract accounting. For contracts structured as milestone agreements, revenue was recognized when a specified milestone was achieved, provided that (1) the milestone event was substantive in nature and there was substantial uncertainty about the achievement of the milestone at the inception of the agreement, (2) the milestone payment was non-refundable, and (3) there was no continuing performance obligations associated with the milestone payment. Any milestone payments received prior to satisfying these revenue recognition criteria were deferred. Intevac generally determined the percentage completed based on the percentage of costs incurred to date in relation to total estimated costs expected through completion of the contract. When estimates of total costs to be incurred on a contract exceeded estimates of total revenue to be earned, a provision for the entire loss on the contract was recorded in the period the loss is determined.

Inventories

Inventories are valued using average actual costs and are stated at the lower of cost or net realizable value. The carrying value of inventory is reduced for estimated obsolescence by the difference between its cost and the net realizable value based upon assumptions about future demand. Intevac evaluates the inventory carrying value for potential excess and obsolete inventory exposures by analyzing historical and anticipated demand. In addition, inventories are evaluated for potential obsolescence due to the effect of known and anticipated engineering change orders and new products. If actual demand were to be substantially lower than estimated, additional inventory adjustments for excess or obsolete inventory might be required, which could have a material adverse effect on Intevac’s business, financial condition and results of operations.

Warranty

Intevac estimates the costs that may be incurred under the warranty it provides and records a liability in the amount of such costs at the time the related revenue is recognized. Estimated warranty costs are determined by analyzing specific product and historical configuration statistics and regional warranty support costs. Intevac’s warranty obligation is affected by product failure rates, material usage, and labor costs incurred in correcting product failures during the warranty period. As Intevac’s customer service engineers and process support engineers are highly trained and deployed globally, labor availability is a significant factor in determining labor costs. The quantity and availability of critical replacement parts is another significant factor in estimating warranty costs. Unforeseen component failures or exceptional component performance can also result in changes to warranty costs. If actual warranty costs differ substantially from our estimates, revisions to the estimated warranty liability would be required.

Income Taxes

Intevac accounts for income taxes by recognizing deferred tax assets and liabilities using enacted tax rates for the effect of temporary differences between the book and tax bases of recorded assets and liabilities, net operating losses and tax credit carryforwards. Deferred tax assets are also reduced by a valuation allowance if it is more likely than not that a portion of the deferred tax asset will not be realized. Management has determined that it is more likely than not that its future taxable income will not be sufficient to realize its entire deferred tax assets.

In determining whether to establish or maintain a valuation allowance against a deferred tax asset, the Company reviews available evidence to determine whether it is more likely than not that all or a portion of the Company’s net deferred tax assets will be realized in future periods. Consideration is given to various positive and negative factors that could affect the realization of the net deferred tax assets. In making such a determination, the Company considers, among other things, future reversals of

29

existing taxable temporary differences, projected future taxable income, tax-planning strategies, historical financial performance, the length of statutory carry forward periods, experience with operating loss and tax credit carry forwards not expiring unused. If the Company determines that it would be able to realize its deferred tax assets in the future in excess of their net recorded amount, the Company would make an adjustment to the deferred tax asset valuation allowance, which would reduce the provision for income taxes.

The effective tax rate is highly dependent upon the geographic composition of worldwide earnings, tax regulations governing each region, non-tax deductible expenses and availability of tax credits. Management carefully monitors the changes in many factors and adjusts the effective income tax rate as required. If actual results differ from these estimates, Intevac could be required to record additional valuation allowances on deferred tax assets or adjust its effective income tax rate, which could have a material adverse effect on Intevac’s business, financial condition and results of operations.

The calculation of tax liabilities involves significant judgment in estimating the impact of uncertainties in the application of complex tax laws. Resolution of these uncertainties in a manner inconsistent with Intevac’s expectations could have a material impact on Intevac’s results of operations and financial condition.

Valuation of Acquisition-Related Contingent Consideration

Contingent consideration related to a business combination is recorded at the acquisition date at the estimated fair value of the contingent payments. The acquisition date fair value is measured based on the consideration expected to be transferred (probability-weighted), discounted back to present value. The discount rate used is determined at the time of the acquisition in accordance with accepted valuation methods. The fair value of the acquisition-related contingent consideration is remeasured at the estimated fair value at each reporting period with the change in fair value recognized as income or expense in the consolidated statements of income.

Equity-Based Compensation

Intevac records compensation expense for equity-based awards using the Black-Scholes option pricing model. This model requires Intevac to estimate the expected volatility of the price of Intevac’s common stock and the expected life of the equity-based awards. Estimating volatility and expected life requires significant judgment and an analysis of historical data. Beginning January 1, 2017, Intevac accounts for forfeitures as they occur rather than estimating expected forfeitures. Intevac may have to increase or decrease compensation expense for equity-based awards if actual results differ significantly from Intevac’s estimates.

Not applicable for smaller reporting companies.

30

INTEVAC, INC.

CONSOLIDATED FINANCIAL STATEMENTS

Contents

31

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

Board of Directors and Stockholders

Intevac, Inc.

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of Intevac, Inc. (a Delaware corporation) and its subsidiaries (the “Company”) as of December 29, 2018 and December 30, 2017, and the related consolidated statements of income, comprehensive income, stockholders’ equity, and cash flows for each of the two years in the period ended December 29, 2018, and the related notes (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 29, 2018 and December 30, 2017, and the results of its operations and its cash flows for each of the two years in the period ended December 29, 2018, in conformity with accounting principles generally accepted in the United States of America.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (“PCAOB”), the Company’s internal control over financial reporting as of December 29, 2018, based on criteria established in Internal Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated February 13, 2019, expressed an unqualified opinion.

Change in Accounting Principle

As discussed in Note 1 to the consolidated financial statements, the Company changed its method of accounting for revenues from contracts with customers in 2018 due to the adoption of the new revenue standard.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

/s/ BPM LLP

We have served as the Company’s auditor since 2015.

San Jose, California

February 13, 2019

32

INTEVAC, INC.

CONSOLIDATED BALANCE SHEETS

See accompanying notes.

33

INTEVAC, INC.

CONSOLIDATED STATEMENTS OF INCOME

See accompanying notes.

34

INTEVAC, INC.

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

See accompanying notes.

35

INTEVAC, INC.

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

(In thousands)

See accompanying notes.

36

INTEVAC, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

See accompanying notes.

37

INTEVAC, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

1. Summary of Significant Accounting Policies

Principles of Consolidation and Basis of Presentation

The consolidated financial statements include the accounts of Intevac, Inc. and its subsidiaries (Intevac or the Company) after elimination of inter-company balances and transactions.

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the amounts reported in the consolidated financial statements and accompanying notes. Actual results could differ materially from those estimates.

Fiscal Year End Date

Intevac operates under a 52-53 week fiscal year ending on the Saturday nearest to December 31 of each year in order to improve the alignment of financial and business processes and to streamline financial reporting. Each fiscal quarter consists of 13 weeks, with an occasional fourth quarter extending to 14 weeks, if necessary, for the fiscal year to end on the Saturday nearest to December 31. The Company’s fiscal 2018 and fiscal 2017 years ended on December 29, 2018 and December 30, 2017, respectively.

Cash, Cash Equivalents and Investments

Intevac considers all highly liquid investments with original maturities of three months or less when purchased to be cash equivalents. Available-for-sale securities, comprised of certificates of deposit, commercial paper, obligations of the U.S. government and its agencies, corporate debt securities, asset backed securities and municipal bonds, are carried at fair value, with unrealized gains and losses recorded within other comprehensive income (loss) as a separate component of stockholders’ equity. Realized gains and losses and declines in value judged to be other than temporary, if any, on available-for-sale securities are included in earnings. Purchases and sales of investment securities are recognized on a trade date basis. The cost of investment securities sold is determined by the specific identification method.

Restricted Cash

Restricted cash of $600,000 as of December 29, 2018 secures a standby letter of credit obligation associated with a lease obligation and the restriction on the cash will be removed when the letter of credit expires. In addition, Intevac pledged $569,000 as collateral for various guarantees with its bank.

Derivative Instruments and Hedging Arrangements

Foreign Exchange Exposure Management — Intevac enters into forward foreign currency contracts that economically hedge the gains and losses generated by the re-measurement of certain recorded assets and liabilities in a non-functional currency and to offset certain operational exposures from the impact of changes in foreign currency exchange rates. Such exposures result from the portion of the Company’s operations, assets and liabilities that are denominated in currencies other than the U.S. dollar, primarily the Singapore dollar. These foreign currency exchange contracts are entered into to support transactions made in the normal course of business, and accordingly, are not speculative in nature. The contracts are for periods consistent with the terms of the underlying transactions, generally one year or less. Changes in the fair value of these undesignated hedges are recognized in other income (expense), net immediately as an offset to the changes in the fair value of the asset or liability being hedged.

Fair Value Measurement—Definition and Hierarchy

Intevac reports certain financial assets and liabilities at fair value. Intevac defines fair value as the price that would be received from selling an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date.

38

INTEVAC, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – (Continued)

Fair value measurements are classified and disclosed in one of the following three categories:

Level 1—Valuations based on quoted prices in active markets for identical assets or liabilities.

Level 2—Valuations based on other than quoted prices in active markets for identical assets and liabilities, quoted prices for identical or similar assets or liabilities in inactive markets, or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities.

Level 3—Valuations based on inputs that are generally unobservable and typically reflect management’s estimates of assumptions that market participants would use in pricing the asset or liability.

Trade Accounts Receivables and Doubtful Accounts

Intevac evaluates the collectibility of trade accounts receivable on an ongoing basis and provides reserves against potential losses when appropriate. Management analyzes historical bad debts, customer concentrations, customer creditworthiness, changes in customer payment tendencies and current economic trends when evaluating the adequacy of the allowance for doubtful accounts. Customer accounts are written off against the allowance when the amount is deemed uncollectible.

Inventories

Inventories are generally stated at the lower of cost or net realizable value, with cost determined on an average cost basis.

Property, Plant and Equipment

Equipment and leasehold improvements are stated at cost. Depreciation is computed using the straight-line method over the estimated useful lives of the assets as follows: computers and software, 3 years; machinery and equipment, 5 years; furniture, 7 years; vehicles, 4 years; and leasehold improvements, remaining lease term.

Contingent Consideration and Purchased Intangible Assets

Contingent consideration related to a business combination is recorded at the acquisition date at the estimated fair value of the contingent payments. The acquisition date fair value is measured based on the consideration expected to be transferred (probability-weighted), discounted back to present value. The discount rate used is determined at the time of the acquisition in accordance with accepted valuation methods. The fair value of the acquisition-related contingent consideration is remeasured at the estimated fair value at each reporting period with the change in fair value recognized as income or expense in the consolidated statements of income.

Purchased intangible assets other than goodwill are amortized over their useful lives unless these lives are determined to be indefinite. Purchased intangible assets are carried at cost, less accumulated amortization. Amortization is computed over the estimated useful lives of the respective assets, generally one to thirteen years using the straight line method. In 2012, as a result of its impairment analysis, Intevac wrote off all of the goodwill in both its TFE and Photonics reporting units.

Impairment of Long-Lived Assets

Long-lived assets and certain identifiable finite-lived intangible assets to be held and used are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of such assets may not be recoverable. Determination of recoverability of long-lived assets is based on an estimate of undiscounted future cash flows resulting from the use of the asset and its eventual disposition. Measurement of an impairment loss for long-lived assets and certain identifiable intangible assets that management expects to hold and use is based on the fair value of the asset. When an impairment loss is recognized, the carrying amount of the asset is reduced to its estimated fair value. No impairment charges were recognized in fiscal 2018 and 2017.

39

INTEVAC, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – (Continued)

Income Taxes

Deferred tax assets and liabilities are recognized using enacted tax rates for the effect of temporary differences between book and tax bases of recorded assets and liabilities. Deferred tax assets are reduced by a valuation allowance if it is more likely than not that a portion of the deferred tax asset will not be realized.

In determining whether to establish or maintain a valuation allowance against a deferred tax asset, the Company reviews available evidence to determine whether it is more likely than not that all or a portion of the Company’s net deferred tax assets will be realized in future periods. Consideration is given to various positive and negative factors that could affect the realization of the net deferred tax assets. In making such a determination, the Company considers, among other things, future reversals of existing taxable temporary differences, projected future taxable income, tax-planning strategies, historical financial performance, the length of statutory carry forward periods, experience with operating loss and tax credit carry forwards not expiring unused. If the Company determines that it would be able to realize its deferred tax assets in the future in excess of their net recorded amount, the Company would make an adjustment to the deferred tax asset valuation allowance, which would reduce the provision for income taxes.

On a quarterly basis, Intevac provides for income taxes based upon an annual effective income tax rate. The effective tax rate is highly dependent upon the level of Intevac’s projected earnings, the geographic composition of worldwide earnings, tax regulations governing each region, net operating loss carryforwards, availability of tax credits and the effectiveness of Intevac’s tax planning strategies. Intevac carefully monitors the changes in many factors and adjust its effective income tax rate on a timely basis. If actual results differ from the estimates, this could have a material effect on Intevac’s business, financial condition and results of operations.

The calculation of tax liabilities involves significant judgment in estimating the impact of uncertainties in the application of complex tax laws. Resolution of these uncertainties in a manner inconsistent with Intevac’s expectations could have a material effect on Intevac’s business, financial condition and results of operations.

Intevac recognizes accrued interest and penalties related to unrecognized tax benefits in the provision for income taxes.

Sales and Value Added Taxes

Taxes collected from customers and remitted to governmental authorities are presented on a net basis in the accompanying consolidated statements of income.

Revenue Recognition

On December 31, 2017, we adopted the new accounting standard ASC 606, Revenue from Contracts with Customers and all the related amendments (“new revenue standard”) to all contracts using the modified retrospective method. We recognized the cumulative effect of initially applying the new revenue standard as an adjustment to the opening balance of the accumulated deficit. The comparative information has not been restated and continues to be reported under the accounting standards in effect for those periods. We expect the impact of the adoption of the new standard to be immaterial to our net income on an ongoing basis.

In our TFE segment, a majority of our equipment sales revenue continues to be recognized when products are shipped from our manufacturing facilities. Revenue recognition for our equipment sales arrangements, which includes systems, technology upgrades, service and spare parts, remains materially consistent with our historical practice.

Under the new revenue standard, in our TFE segment, we recognize revenue for equipment sales at a point in time following the transfer of control of such products to the customer, which typically occurs upon shipment or delivery depending on the terms of the underlying contracts. Our contracts with customers may include multiple performance obligations. For such arrangements, under the new revenue standard we allocate revenue to each performance obligation based on its relative standalone selling price. We generally determine standalone selling prices based on the prices charged to customers or by using expected cost plus margin. Under the new revenue standard, the expected costs associated with our base warranties continue to be recognized as expense when the equipment is sold.

40

INTEVAC, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – (Continued)

Under the new revenue standard, in our Photonics segment, we recognize revenue for CPFF and FFP government contracts over time under the cost-to-cost method for the majority of our government contracts, which is consistent with our historical revenue recognition model. Revenue on the majority of our government contracts will continue to be recognized over time because of the continuous transfer of control to the customer. For U.S. government contracts, this continuous transfer of control to the customer is supported by clauses in the contract that allow the customer to unilaterally terminate the contract for convenience, pay us for costs incurred plus a reasonable profit and take control of any work in process. Similarly, for non-U.S. government contracts, the customer typically controls the work in process as evidenced either by contractual termination clauses or by our rights to payment for work performed to date to deliver products or services that do not have an alternative use to the Company. Under the new standard, the cost-to-cost measure of progress continues to best depict the transfer of control of assets to the customer, which occurs as we incur costs.

The majority of our contracts in our Photonics segment have a single performance obligation as the promise to transfer the individual goods or services is not separately identifiable from other promises in the contracts and, therefore, not distinct. Some of our contracts have multiple performance obligations, most commonly due to the contract covering multiple phases of the product lifecycle (development and production). For contracts with multiple performance obligations, we allocate the contract’s transaction price to each performance obligation using our best estimate of the standalone selling price of each distinct good or service in the contract. The primary method used to estimate standalone selling price is the expected cost plus a margin approach, under which we forecast our expected costs of satisfying a performance obligation and then add an appropriate margin for that distinct good or service.

Under the new revenue standard, in our Photonics segment, we recognize revenue for homogenous manufactured military products sold to the U.S. government and its contractors over time under the units-of-delivery method because of the continuous transfer of control to the customer. Intevac believes that the units-of-delivery method is an appropriate measure for measuring progress for the manufactured units as an equal amount of value is individually transferred to the customer upon delivery. The Company previously recognized revenue for substantially all manufactured military products sold to the U.S. government and its contractors when the customers took delivery of the products, which was generally upon shipment.

The nature of our contracts in our Photonics segment gives rise to several types of variable consideration including tiered pricing. Allocation of contract revenues among Photonics military products, and the timing of the recognition of those revenues, is impacted by agreements with tiered pricing or variable rate structures. We include variable consideration in the estimated transaction price when there is a basis to reasonably estimate the amount of the consideration. These estimates are based on historical experience, anticipated performance and our best judgment at the time. Because of our certainty in estimating these amounts, they are included in the transaction price of our contracts and the associated remaining performance obligations.

Accounting for CPFF and FFP contracts and programs involves the use of various techniques to estimate total contract revenue and costs. For these contracts, we estimate the profit on a contract as the difference between the total estimated revenue and expected costs to complete a contract and recognize that profit over the life of the contract. Contract estimates are based on various assumptions to project the outcome of future events. These assumptions include the complexity of the work to be performed; the cost and availability of materials; the performance of subcontractors; and the availability and timing of funding from the customer.

As a significant change in one or more of these estimates could affect the profitability of our contracts, we review and update our contract-related estimates regularly. We recognize adjustments in estimated profit on contracts under the cumulative catch-up method. Under this method, the impact of the adjustment on profit recorded to date on a contract is recognized in the period the adjustment is identified. Revenue and profit in future periods of contract performance are recognized using the adjusted estimate. If at any time the estimate of contract profitability indicates an anticipated loss on the contract, we recognize the total loss in the quarter it is identified.

Prior to December 31, 2017, Intevac recognized revenue when persuasive evidence of an arrangement existed, delivery had occurred and title and risk of loss had passed to Intevac’s customer or services had been rendered, the price was fixed or determinable, and collectibility was reasonably assured. Intevac’s revenue recognition policy generally resulted in revenue recognition at the following points: (1) for all transactions where legal title passed to the customer upon shipment, Intevac

41

INTEVAC, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – (Continued)

recognized revenue upon shipment for all products that had been demonstrated to meet product specifications prior to shipment; the portion of revenue associated with certain installation-related tasks was deferred, and that revenue was recognized upon completion of the installation-related tasks; (2) for products that had not been demonstrated to meet product specifications prior to shipment, revenue was recognized at customer acceptance; and (3) for arrangements containing multiple elements, the revenue relating to the undelivered elements was deferred until delivery of the deferred elements. When a sales arrangement contained multiple elements, Intevac allocated revenue to each element based on a selling price hierarchy. The selling price for a deliverable was based on its VSOE if available, TPE if VSOE was not available, or best ESP if neither VSOE nor TPE was available. Intevac generally utilized the ESP due to the nature of its products. In certain cases, technology upgrade sales were accounted for as multiple-element arrangements, usually split between delivery of the parts and installation on the customer’s systems. In those cases, Intevac recognized revenue for the relative sales price of the parts upon shipment and transfer of title, and recognized revenue for the relative sales price of installation services when those services were completed. Revenue related to sales of spare parts was generally recognized upon shipment. Intevac recognized revenue in certain circumstances before delivery had occurred (commonly referred to as bill and hold transactions). In such circumstances, among other things, risk of ownership had passed to the customer, the customer had made a written fixed commitment to purchase the finished goods, the customer had requested the finished goods be held for future delivery as scheduled and designated by them, and no additional performance obligations existed by Intevac. For those transactions, the finished goods were segregated from inventory and normal billing and credit terms granted. Revenue related to services was generally recognized upon completion of the services. In addition, Intevac used the installment method to record revenue based on cash receipts in situations where the account receivable was collected over an extended period of time and in management’s judgment the degree of collectibility was uncertain.

Revenue on CPFF contracts was recognized to the extent of costs actually incurred plus a proportionate amount of the fee earned. Intevac considered fixed fees under CPFF contracts to be earned in proportion to the allowable costs actually incurred in performance of the contract. Revenue on FFP contracts was recognized on a milestone method or percentage-of-completion method of contract accounting. For contracts structured as milestone agreements, revenue was recognized when a specified milestone was achieved, provided that (1) the milestone event is substantive in nature and there is substantial uncertainty about the achievement of the milestone at the inception of the agreement, (2) the milestone payment is non-refundable, and (3) there is no continuing performance obligations associated with the milestone payment. Any milestone payments received prior to satisfying these revenue recognition criteria were deferred. Intevac generally determined the percentage completed based on the percentage of costs incurred to date in relation to total estimated costs expected through completion of the contract. When estimates of total costs to be incurred on a contract exceeded estimates of total revenue to be earned, a provision for the entire loss on the contract was recorded in the period the loss is determined.

Adoption of New Accounting Standard

Upon adoption of the new revenue standard, we recorded a cumulative effect adjustment to the beginning balance of our consolidated December 31, 2017 balance sheet for the impact of the allocation and the timing of the recognition of revenues for an open Photonics military product agreement with a tiered pricing structure. This change will also result in increased revenue in subsequent periods from this agreement. The cumulative effect of the changes made to our consolidated December 31, 2017 balance sheet were as follows (in thousands):

42

INTEVAC, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – (Continued)

In accordance with the new revenue standard requirements, the disclosure of the impact of adoption on our selected consolidated statement of income line items was as follows (in thousands):

Consolidated Statement of Income

In accordance with the new revenue standard requirements, the disclosure of the impact of adoption on select consolidated balance sheet line items was as follows (in thousands):

Consolidated Balance Sheet

Advertising Costs

Advertising costs are expensed as incurred. Advertising costs were not material for all periods presented.

Foreign Currency Translation

The functional currency of Intevac’s foreign subsidiaries in Singapore and Hong Kong and the Taiwan branch is the U.S. dollar. The functional currency of Intevac’s foreign subsidiaries in China, Malaysia and Korea is the local currency of the country in which the respective subsidiary operates. Assets and liabilities recorded in foreign currencies are translated at year-end exchange rates; revenues and expenses are translated at average exchange rates during the year. The effect of foreign currency translation adjustments are included in stockholders’ equity as a component of accumulated other comprehensive income in the accompanying consolidated balance sheets. The effects of foreign currency transactions are included in other income in the determination of net income (loss). Gains (losses) from foreign currency transactions were ($80,000) and ($107,000) in 2018 and 2017, respectively.

43

INTEVAC, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – (Continued)

Comprehensive Income

The changes in accumulated other comprehensive income by component, were as follows for the years ended December 29, 2018 and December 30, 2017:

Employee Stock Plans

Intevac has equity-based compensation plans that provide for the grant to employees of equity-based awards, including incentive or non-statutory stock options, restricted stock, stock appreciation rights, restricted stock units (“RSUs”), performance units and performance bonus awards. In addition, these plans provide for the grant of non-statutory stock options and RSUs to non-employee directors and consultants. Intevac also has an employee stock purchase plan, which provides Intevac’s employees with the opportunity to purchase Intevac common stock at a discount through payroll deductions. See Note 3 for a complete description of these plans and their accounting treatment.

Recent Accounting Pronouncements Not Yet Adopted

In February 2018, the Financial Accounting Standards Board (“FASB”) issued Accounting Standard Update (“ASU”) 2018-02, Income Statement – Reporting Comprehensive Income (Topic 220): Reclassification of Certain Tax Effects from Accumulated Other Comprehensive Income. ASU 2018-02 allows a reclassification from accumulated other comprehensive income to retained earnings for “stranded tax effects” resulting from Tax Reform. The guidance states that because the adjustment of deferred taxes due to the reduction of the historical corporate income tax rate to the newly enacted corporate income tax rate is required to be included in income from continuing operations, the tax effects of items within accumulated other comprehensive income (“stranded tax effects”) do not reflect the appropriate tax rate. As stated within the guidance, the amendments in this update should be applied retrospectively to each period in which the effect of the change in the U.S. federal corporate income tax rate in the Tax Reform is recognized. This update becomes effective and will be adopted by Intevac in the first quarter of fiscal 2019. Intevac does not expect the adoption of this update to have a material impact on its consolidated financial statements.

In May 2017, the FASB issued ASU 2017-09, Compensation—Stock Compensation: Scope of Modification Accounting, which provides guidance about which changes to the terms or conditions of a share-based payment award require an entity to apply modification accounting. An entity will account for the effects of a modification unless the fair value of the modified award is the same as the original award, the vesting conditions of the modified award are the same as the original award and the classification of the modified award as an equity instrument or liability instrument is the same as the original award. This update becomes effective and will be adopted by Intevac in the first quarter of fiscal 2019. The update is to be adopted prospectively to an award modified on or after the adoption date. Intevac does not expect the adoption of this update to have a material impact on its consolidated financial statements.

44

INTEVAC, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – (Continued)

In March 2017, the FASB issued ASU 2017-08, Receivables – Nonrefundable Fees and Other Costs (Subtopic 310-20): Premium Amortization on Purchased Callable Debt Securities. ASU 2017-08 amends the amortization period for certain purchased callable debt securities held at a premium, shortening such period to the earliest call date. This update becomes effective and will be adopted by Intevac in the first quarter of fiscal 2019. Intevac does not expect the adoption of this update to have a material impact on its consolidated financial statements.

In January 2017, the FASB issued ASU 2017-04, Intangibles—Goodwill and Other (Topic 350): Simplifying the Test for Goodwill Impairment. ASU 2017-04 eliminates Step 2 from the goodwill impairment test. Under Step 2, an entity had to perform procedures to determine the fair value at the impairment testing date of its assets and liabilities (including unrecognized assets and liabilities) following the procedure that would be required in determining the fair value of assets acquired and liabilities assumed in a business combination. Instead, under the amendments in ASU 2017-04, an entity should perform its annual, or interim, goodwill impairment test by comparing the fair value of a reporting unit with its carrying amount. An entity should recognize an impairment charge for the amount by which the carrying amount exceeds the reporting unit’s fair value; however, the loss recognized should not exceed the total amount of goodwill allocated to that reporting unit. Additionally, an entity should consider income tax effects from any tax deductible goodwill on the carrying amount of the reporting unit when measuring the goodwill impairment loss, if applicable. An entity still has the option to perform the qualitative assessment for a reporting unit to determine if the quantitative impairment test is necessary. This update becomes effective and will be adopted by Intevac in the first quarter of fiscal 2020. Early adoption is permitted for interim or annual goodwill impairment tests performed on testing dates after January 1, 2017. Intevac does not expect the adoption of this update to have a material impact on its consolidated financial statements.

In June 2016, the FASB issued ASU 2016-13, Financial Instruments – Credit Losses (Topic 326). This ASU amends the impairment model to utilize an expected loss methodology in place of the currently used incurred loss methodology, which will result in the more-timely recognition of losses. The requirements of this ASU are effective for interim and annual reporting periods beginning after December 15, 2019. We are currently assessing how the adoption of this standard will impact our consolidated financial statements.

In February 2016, the FASB issued ASU 2016-02, Leases. The new standard requires lessees to record assets and liabilities on the balance sheet for all leases with terms longer than 12 months. Leases will be classified as either finance or operating, with classification affecting the pattern of expense recognition in the income statement.

Intevac leases certain facilities under non-cancelable operating leases that expire at various times up to March 2024 and has options to renew most leases, with rentals to be negotiated. Certain of Intevac’s leases contain provisions for rental adjustments. Operating lease rentals are expensed on a straight-line basis over the life of the lease beginning on the date we take possession of the property. At lease inception, we determine the lease term by assuming the exercise of those renewal options that are reasonably assured. The exercise of lease renewal options is at our sole discretion. The lease term is used to determine whether a lease is financing or operating and is used to calculate straight-line rent expense. Additionally, the depreciable life of leasehold improvements is limited by the expected lease term.

We plan to adopt the standard as of December 30, 2018, the beginning of fiscal 2019. We will elect the package of practical expedients permitted under the transition guidance within the new standard, which, among other things, allows us to carry forward the historical lease classification. In addition, we are electing the hindsight practical expedient to determine the reasonably certain lease term for existing leases. We will make an accounting policy election to keep leases with an initial term of 12 months or less off of the balance sheet. We will recognize those lease payments in the consolidated statements of income on a straight-line basis over the lease term. We also plan to elect the practical expedient that allow us to apply the new lease guidance at its effective date, December 30, 2018, without adjusting the comparative financial statements.

We are currently completing the assessment phase of the implementation project and are finalizing our review of the impact of adoption. We expect the adoption of these accounting changes will materially increase our assets and liabilities, but will not have a material impact on our results of operations, equity, or cash flows.

45

INTEVAC, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – (Continued)

2.    Revenue

The following tables represent a disaggregation of revenue from contracts with customers for fiscal 2018 and 2017 along with the reportable segment for each category. As noted above, the prior period amounts have not been adjusted under the modified retrospective method.

Major Products and Service Lines

Primary Geography Markets

Timing of Revenue Recognition