ATI 2014 10-Q Q2
Table of Contents

 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 
 FORM 10-Q
 
ý
QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the Quarterly Period Ended June 30, 2014
OR
¨
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the Transition Period From                      to                     
Commission File Number 1-12001
 
 ALLEGHENY TECHNOLOGIES INCORPORATED
(Exact name of registrant as specified in its charter)
 
Delaware
 
25-1792394
(State or other jurisdiction of
 
(I.R.S. Employer
incorporation or organization)
 
Identification No.)
 
 
 
1000 Six PPG Place
 
 
Pittsburgh, Pennsylvania
 
15222-5479
(Address of Principal Executive Offices)
 
(Zip Code)
(412) 394-2800
(Registrant’s telephone number, including area code)
 
Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.     Yes  ý    No  ¨
Indicate by check mark whether the Registrant submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).     Yes  ý    No  ¨
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
 
Large accelerated filer
ý
Accelerated filer
¨
 
 
 
 
Non-accelerated filer
o (Do not check if a smaller reporting company)
Smaller reporting company
¨
Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).     Yes  ¨    No  ý
At July 28, 2014, the registrant had outstanding 108,721,200 shares of its Common Stock.
 


Table of Contents

ALLEGHENY TECHNOLOGIES INCORPORATED
SEC FORM 10-Q
Quarter Ended June 30, 2014
INDEX
 
Page No.
PART I. - FINANCIAL INFORMATION
 
 
 
Item 1. Financial Statements
 
 
 
Consolidated Balance Sheets
 
 
Consolidated Statements of Operations
 
 
Consolidated Statements of Comprehensive Income
 
 
Consolidated Statements of Cash Flows
 
 
Statements of Changes in Consolidated Equity
 
 
Notes to Consolidated Financial Statements
 
 
Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations
 
 
Item 3. Quantitative and Qualitative Disclosures About Market Risk
 
 
Item 4. Controls and Procedures
 
 
PART II. - OTHER INFORMATION
 
 
 
Item 1. Legal Proceedings
 
 
Item 1A. Risk Factors
 
 
Item 6. Exhibits
 
 
SIGNATURES
 
 
EXHIBIT INDEX


Table of Contents

PART I. FINANCIAL INFORMATION
Item 1. Financial Statements
Allegheny Technologies Incorporated and Subsidiaries
Consolidated Balance Sheets
(In millions, except share and per share amounts)
(Current period unaudited)
 
June 30,
2014
 
December 31,
2013
ASSETS
 
 
 
Current Assets:
 
 
 
Cash and cash equivalents
$
355.1

 
$
1,026.8

Accounts receivable, net of allowances for doubtful accounts of $4.9 and $5.3 as of June 30, 2014 and December 31, 2013, respectively
650.9

 
528.2

Inventories, net
1,406.5

 
1,322.1

Prepaid expenses and other current assets
97.7

 
67.6

Current assets of discontinued operations
3.6

 
6.1

Total Current Assets
2,513.8

 
2,950.8

Property, plant and equipment, net
2,916.8

 
2,874.1

Cost in excess of net assets acquired
785.1

 
727.9

Other assets
352.0

 
342.0

Non-current assets of discontinued operations
3.2

 
3.7

Total Assets
$
6,570.9

 
$
6,898.5

LIABILITIES AND EQUITY
 
 
 
Current Liabilities:
 
 
 
Accounts payable
$
556.3

 
$
471.8

Accrued liabilities
298.5

 
310.9

Deferred income taxes
26.2

 
3.5

Short term debt and current portion of long-term debt
17.4

 
419.9

Current liabilities of discontinued operations
4.6

 
4.9

Total Current Liabilities
903.0

 
1,211.0

Long-term debt
1,520.7

 
1,527.4

Accrued postretirement benefits
425.3

 
442.4

Pension liabilities
355.8

 
368.2

Deferred income taxes
229.4

 
206.6

Other long-term liabilities
146.0

 
148.2

Total Liabilities
3,580.2

 
3,903.8

Redeemable noncontrolling interest
12.1

 

Equity:
 
 
 
ATI Stockholders’ Equity:
 
 
 
Preferred stock, par value $0.10: authorized-50,000,000 shares; issued-none

 

Common stock, par value $0.10: authorized-500,000,000 shares; issued-109,695,171 shares at June 30, 2014 and December 31, 2013; outstanding- 108,722,026 shares at June 30, 2014 and 107,983,360 shares at December 31, 2013
11.0

 
11.0

Additional paid-in capital
1,156.6

 
1,185.9

Retained earnings
2,416.5

 
2,490.1

Treasury stock: 973,145 shares at June 30, 2014 and 1,711,811 shares at December 31, 2013
(44.2
)
 
(79.6
)
Accumulated other comprehensive loss, net of tax
(664.2
)
 
(713.2
)
Total ATI stockholders’ equity
2,875.7

 
2,894.2

Noncontrolling interests
102.9

 
100.5

Total Equity
2,978.6

 
2,994.7

Total Liabilities and Equity
$
6,570.9

 
$
6,898.5

The accompanying notes are an integral part of these statements.

1

Table of Contents

Allegheny Technologies Incorporated and Subsidiaries
Consolidated Statements of Operations
(In millions, except per share amounts)
(Unaudited)
 
 
Three months ended June 30,
 
Six months ended June 30,
 
2014
 
2013
 
2014
 
2013
Sales
$
1,119.0

 
$
1,056.8

 
$
2,106.3

 
$
2,155.8

Costs and expenses:
 
 
 
 
 
 
 
Cost of sales
1,029.5

 
969.1

 
1,946.6

 
1,967.6

Selling and administrative expenses
65.7

 
67.1

 
133.4

 
139.5

Income before interest, other income and income taxes
23.8

 
20.6

 
26.3

 
48.7

Interest expense, net
(28.5
)
 
(13.9
)
 
(57.6
)
 
(28.3
)
Other income (expense), net
1.3

 
(0.2
)
 
1.9

 
0.9

Income (loss) from continuing operations before income tax provision
(3.4
)
 
6.5

 
(29.4
)
 
21.3

Income tax provision (benefit)
(2.9
)
 
0.6

 
(12.9
)
 
4.1

Income (loss) from continuing operations
(0.5
)
 
5.9

 
(16.5
)
 
17.2

Income (loss) from discontinued operations, net of tax
(0.2
)
 
0.7

 
(2.1
)
 
1.0

Net income (loss)
(0.7
)
 
6.6

 
(18.6
)
 
18.2

Less: Net income attributable to noncontrolling interests
3.3

 
2.2

 
5.4

 
3.8

Net income (loss) attributable to ATI
$
(4.0
)
 
$
4.4

 
$
(24.0
)
 
$
14.4

 
 
 
 
 
 
 
 
Income (loss) per common share:
 
 
 
 
 
 
 
Basic
 
 
 
 
 
 
 
Continuing operations attributable to ATI per common share
$
(0.03
)
 
$
0.04

 
$
(0.20
)
 
$
0.13

Discontinued operations attributable to ATI per common share

 

 
(0.02
)
 

Basic net income (loss) attributable to ATI per common share
$
(0.03
)
 
$
0.04

 
$
(0.22
)
 
$
0.13

 
 
 
 
 
 
 
 
Diluted
 
 
 
 
 
 
 
Continuing operations attributable to ATI per common share
$
(0.03
)
 
$
0.04

 
$
(0.20
)
 
$
0.13

Discontinued operations attributable to ATI per common share

 

 
(0.02
)
 

Diluted net income (loss) attributable to ATI per common share
$
(0.03
)
 
$
0.04

 
$
(0.22
)
 
$
0.13

Dividends declared per common share
$
0.18

 
$
0.18

 
$
0.36

 
$
0.36

 
 
 
 
 
 
 
 
Amounts attributable to ATI common stockholders:
 
 
 
 
 
 
 
Income (loss) from continuing operations, net of tax
$
(3.8
)
 
$
3.7

 
$
(21.9
)
 
$
13.4

Income (loss) from discontinued operations, net of tax
(0.2
)
 
0.7

 
(2.1
)
 
1.0

Net income (loss)
$
(4.0
)
 
$
4.4

 
$
(24.0
)
 
$
14.4

The accompanying notes are an integral part of these statements.


2

Table of Contents

Allegheny Technologies Incorporated and Subsidiaries
Consolidated Statements of Comprehensive Income
(In millions)
(Unaudited)
 
 
Three months ended June 30,
 
Six months ended June 30,
 
2014
 
2013
 
2014
 
2013
Net income (loss)
$
(0.7
)
 
$
6.6

 
$
(18.6
)
 
$
18.2

Currency translation adjustment
 
 
 
 
 
 
 
Unrealized net change arising during the period
7.7

 
4.5

 
4.4

 
(8.5
)
Unrealized holding gain on securities
 
 
 
 
 
 
 
Net gain (loss) arising during the period
0.1

 
(0.1
)
 
0.1

 

Derivatives
 
 
 
 
 
 
 
Net derivatives gain (loss) on hedge transactions
12.8

 
(16.0
)
 
22.1

 
(2.9
)
Reclassification to net income of net realized loss (gain)
(0.5
)
 
0.5

 
1.6

 
1.2

Income taxes on derivative transactions
4.7

 
(6.1
)
 
9.1

 
(0.7
)
Total
7.6

 
(9.4
)
 
14.6

 
(1.0
)
Postretirement benefit plans
 
 
 
 
 
 
 
Amortization of net actuarial loss
22.0

 
33.5

 
44.0

 
67.0

Prior service cost
 
 
 
 

 
 
Amortization to net income of net prior service credits
(0.1
)
 
(3.8
)
 
(0.3
)
 
(7.6
)
Income taxes on postretirement benefit plans
8.4

 
11.4

 
16.8

 
22.9

Total
13.5

 
18.3

 
26.9

 
36.5

Other comprehensive income, net of tax
28.9

 
13.3

 
46.0

 
27.0

Comprehensive income
28.2

 
19.9

 
27.4

 
45.2

Less: Comprehensive income attributable to noncontrolling interests
2.2

 
4.1

 
2.4

 
6.2

Comprehensive income attributable to ATI
$
26.0

 
$
15.8

 
$
25.0

 
$
39.0

The accompanying notes are an integral part of these statements.


3

Table of Contents

Allegheny Technologies Incorporated and Subsidiaries
Consolidated Statements of Cash Flows
(In millions)
(Unaudited)
 
 
Six months ended June 30,
 
2014
 
2013
Operating Activities:
 
 
 
Net income (loss)
$
(18.6
)
 
$
18.2

Adjustments to reconcile net income (loss) to net cash provided by (used in) operating activities:
 
 
 
Depreciation and amortization
87.5

 
96.9

Deferred taxes
10.5

 
57.1

Changes in operating asset and liabilities:
 
 
 
Inventories
(78.0
)
 
31.6

Accounts receivable
(119.7
)
 
(42.2
)
Accounts payable
82.2

 
(54.2
)
Retirement benefits
10.9

 
32.3

Accrued income taxes
(29.3
)
 
(53.9
)
Accrued liabilities and other
17.0

 
(27.8
)
Cash provided by (used in) operating activities
(37.5
)
 
58.0

Investing Activities:
 
 
 
Purchases of property, plant and equipment
(97.9
)
 
(223.7
)
Purchases of businesses, net of cash acquired
(92.5
)
 

Asset disposals and other
2.1

 
0.5

Cash used in investing activities
(188.3
)
 
(223.2
)
Financing Activities:
 
 
 
Payments on long-term debt and capital leases
(403.4
)
 
(5.9
)
Net borrowings under credit facilities

 
0.6

Dividends paid to stockholders
(38.6
)
 
(38.4
)
Dividends paid to noncontrolling interests

 
(18.0
)
Taxes on share-based compensation

 
2.6

Exercises of stock options and other

 
0.4

Shares repurchased for income tax withholding on share-based compensation
(3.9
)
 
(6.6
)
Cash used in financing activities
(445.9
)
 
(65.3
)
Decrease in cash and cash equivalents
(671.7
)
 
(230.5
)
Cash and cash equivalents at beginning of period
1,026.8

 
304.6

Cash and cash equivalents at end of period
$
355.1

 
$
74.1

The accompanying notes are an integral part of these statements.


4

Table of Contents

Allegheny Technologies Incorporated and Subsidiaries
Statements of Changes in Consolidated Equity
(In millions, except per share amounts)
(Unaudited)
 
 
ATI Stockholders
 
 
 
 
 
Common
Stock
 
Additional
Paid-In
Capital
 
Retained
Earnings
 
Treasury
Stock
 
Accumulated
Other
Comprehensive
Income (Loss)
 
Non-
controlling
Interests
 
Total
Equity
Balance, December 31, 2012
$
11.0

 
$
1,181.7

 
$
2,427.6

 
$
(111.3
)
 
$
(1,029.4
)
 
$
107.5

 
$
2,587.1

Net income

 

 
14.4

 

 

 
3.8

 
18.2

Other comprehensive income

 

 

 

 
24.6

 
2.4

 
27.0

Cash dividends on common stock ($0.36 per share)

 

 
(38.4
)
 

 

 

 
(38.4
)
Dividends paid to noncontrolling interest

 

 

 

 

 
(18.0
)
 
(18.0
)
Employee stock plans

 
(6.6
)
 
(14.5
)
 
32.1

 

 

 
11.0

Balance, June 30, 2013
$
11.0

 
$
1,175.1

 
$
2,389.1

 
$
(79.2
)
 
$
(1,004.8
)
 
$
95.7

 
$
2,586.9

Balance, December 31, 2013
$
11.0

 
$
1,185.9

 
$
2,490.1

 
$
(79.6
)
 
$
(713.2
)
 
$
100.5

 
$
2,994.7

Net income (loss)

 

 
(24.0
)
 

 

 
5.4

 
(18.6
)
Other comprehensive income (loss)

 

 

 

 
49.0

 
(3.0
)
 
46.0

Cash dividends on common stock ($0.36 per share)

 

 
(38.6
)
 

 

 

 
(38.6
)
Conversion of convertible notes

 

 
(0.5
)
 
5.5

 

 

 
5.0

Employee stock plans

 
(29.3
)
 
(10.5
)
 
29.9

 

 

 
(9.9
)
Balance, June 30, 2014
$
11.0

 
$
1,156.6

 
$
2,416.5

 
$
(44.2
)
 
$
(664.2
)
 
$
102.9

 
$
2,978.6

The accompanying notes are an integral part of these statements.

5

Table of Contents

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
Unaudited
Note 1. Accounting Policies
The interim consolidated financial statements include the accounts of Allegheny Technologies Incorporated and its subsidiaries. Unless the context requires otherwise, “Allegheny Technologies”, “ATI” and “the Company” refer to Allegheny Technologies Incorporated and its subsidiaries.
These unaudited consolidated financial statements have been prepared in accordance with U.S. generally accepted accounting principles for interim financial information and with the instructions for Form 10-Q and Article 10 of Regulation S-X. Accordingly, they do not include all of the information and note disclosures required by U.S. generally accepted accounting principles for complete financial statements. In management’s opinion, all adjustments (which include only normal recurring adjustments) considered necessary for a fair presentation have been included. Certain prior year amounts have been reclassified in order to conform with the fiscal year 2014 presentation. These unaudited consolidated financial statements should be read in conjunction with the consolidated financial statements and notes thereto included in the Company’s 2013 Annual Report on Form 10-K. The results of operations for these interim periods are not necessarily indicative of the operating results for any future period. The December 31, 2013 financial information has been derived from the Company’s audited consolidated financial statements.
ATI’s strategic vision is to be an aligned and integrated specialty materials and components company. In conjunction with this initiative, in the first quarter of 2014, the High Performance Metals segment was renamed the High Performance Materials & Components segment. Individual business unit names within each segment were also changed to reflect their aligned and integrated product focus. There was no change to the business units that comprise each business segment or the manner in which resources are allocated and performance is assessed for the business units by management. Therefore, there was no change to business segment reporting as a result of this initiative.
New Accounting Pronouncements Adopted
In January 2014, the Company adopted changes issued by the Financial Accounting Standards Board (FASB) that require an entity to net its liability for unrecognized tax positions against a net operating loss carryforward, a similar tax loss or a tax credit carryforward when settlement in this manner is available under the tax law. The adoption of these changes had no impact on the consolidated financial statements.
In January 2014, the Company adopted changes issued by the FASB to the accounting for obligations resulting from joint and several liability arrangements. This guidance requires an entity that is joint and severally liable to measure the obligation as the sum of the amount the entity has agreed with co-obligors to pay and any additional amount it expects to pay on behalf of one or more co-obligors. Required disclosures include a description of the nature of the arrangement, how the liability arose, the relationship with co-obligors and the terms and conditions of the arrangement. The adoption of these changes had no impact on the consolidated financial statements.
In January 2014, the Company adopted changes issued by the FASB to a parent entity’s accounting for the cumulative translation adjustment (CTA) upon derecognition of certain subsidiaries or groups of assets within a foreign entity or of an investment in a foreign entity. The amendments specify that CTA should be released into earnings when an entity ceases to have a controlling financial interest in a subsidiary or group of assets within a consolidated foreign entity and the sale or transfer results in the complete or substantially complete liquidation of the foreign entity. For sales of an equity method investment that is a foreign entity, a pro rata portion of CTA attributable to the investment would be recognized in earnings when the investment is sold. When an entity sells either a part or all of its investment in a consolidated foreign entity, CTA would be recognized in earnings only if the sale results in the parent no longer having a controlling financial interest in the foreign entity. In addition, CTA should be recognized in earnings in a business combination achieved in stages (i.e., a step acquisition). The adoption of these changes had no impact on the consolidated financial statements.
Pending Accounting Pronouncements

In May 2014, the FASB issued changes to revenue recognition with customers. This update provides a five-step analysis of transactions to determine when and how revenue is recognized. An entity should recognize revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. This update will be effective for the Company beginning in fiscal year 2017. This update may be applied retrospectively to each prior reporting period presented or retrospectively with the cumulative effect of

6

Table of Contents

initially applying this update recognized at the date of initial application. The Company is currently evaluating the impact of the new guidance on its consolidated financial statements.
In April 2014, the FASB issued changes to the criteria for reporting discontinued operations. Under the new criteria, a disposal of a component of an entity is required to be reported as discontinued operations only if the disposal represents a strategic shift that has, or will have, a major effect on an entity’s operations and financial results. The current criteria that there be no significant continuing involvement in the operations of the component after the disposal transaction has been removed under the new guidance. The new guidance also requires the presentation of the assets and liabilities of a disposal group that includes a discontinued operation for each comparative period and requires additional disclosures about discontinued operations, including the major line items constituting the pretax profit or loss of the discontinued operation, certain cash flow information for the discontinued operation, expanded disclosures about an entity’s significant continuing involvement in a discontinued operation, and disclosures about a disposal of an individually significant component of an entity that does not qualify for discontinued operations presentation. The provisions of the new guidance become effective for all disposals that occur for the Company beginning in fiscal year 2015. The Company does not anticipate a material impact to the consolidated financial statements upon adoption.
Note 2. Acquisition of Business
On February 7, 2014, the Company acquired 85% of Dynamic Flowform Corp. (“Dynamic Flowform”) for $72.9 million of cash consideration, net of cash acquired. The Dynamic Flowform acquisition is treated as an asset purchase for tax purposes. The holders of the 15% noncontrolling interest have a put option requiring the Company to purchase their equity interest (see Note 12 for additional explanation). The Company also incurred $0.7 million of pre-tax costs related to the acquisition, consisting primarily of professional fees, which were recorded in selling and administrative expenses in the six months ended June 30, 2014 consolidated statement of operations.
Based in Billerica, MA, Dynamic Flowform, which has been renamed ATI Flowform Products, uses precision flowforming process technologies to produce thin-walled components in net or near-net shapes across multiple alloy systems, including nickel-based alloys and superalloys, titanium and titanium alloys, zirconium alloys, and specialty and stainless alloys. Management expects this acquisition to expand the Company’s capabilities to produce specialty materials parts and components, primarily in the aerospace and defense, and oil & gas/chemical process industry markets. ATI Flowform Products results are included in the High Performance Materials & Components segment from the date of the acquisition.
The purchase price allocation includes technology, trademarks and customer intangible assets of $21.4 million, which will be amortized over a 23 year weighted average life, and goodwill of $46.8 million, which is deductible for tax purposes. The final allocation of the purchase price was completed in the second quarter of 2014.
In addition, on June 12, 2014, the Company acquired Hanard Machine, Inc. (“Hanard”) for $20.2 million of cash consideration, net of cash acquired, including $19.6 million paid in the second quarter of 2014 and $0.6 million that is expected to be paid within the next twelve months. Located in Salem, OR, Hanard performs precision machining on parts and components made from titanium alloys, nickel-based alloys and superalloys, aluminum, specialty steel, and other ferrous and non-ferrous metals. The business operates as ATI Cast Products, Salem Operations, and is reported as a part of the High Performance Materials & Components segment from the date of the acquisition. Management expects this acquisition to expand the Company’s capabilities to produce finished specialty materials parts and components and reinforces the Company’s important aerospace supply chain role.  The preliminary purchase price allocation includes technology and customer intangible assets of $4.3 million, which will be amortized over a 20 year life, and goodwill of $8.0 million, which is deductible for tax purposes. The final allocation of the purchase price is expected to be completed by the end of the third quarter of 2014.
Pro forma financial information has not been included because these acquisitions did not meet certain significance thresholds individually or in the aggregate.
Note 3. Discontinued Operations
On November 4, 2013, the Company completed the sale of its tungsten materials business, which produces tungsten powder, tungsten heavy alloys, tungsten carbide materials, and carbide cutting tools. The operating results for this business have been included in discontinued operations in the Company's consolidated statement of operations for the three and six months ended June 30, 2013.
Also, during the third quarter of 2013, the Company completed a strategic review of its iron castings and fabricated components businesses. Based on current and forecasted results, these businesses were not projected to meet the Company’s long-term profitable growth and return on capital employed expectations resulting in the closure of the fabricated components

7

Table of Contents

business and planned divestiture of the iron casting business in 2013. In April 2014, the Company announced plans to close its iron castings business, as the divestiture of this business through a sale process on commercially acceptable terms was unlikely to be successful. Assuming an agreement to sell is not reached, the orderly wind-down of operations is expected to be completed by the end of the third quarter 2014 and is expected to result in $1.7 million of cash exit costs, primarily related to severance benefits, of which $1.2 million was recorded in the second quarter ended June 30, 2014, and the remainder to be recorded in the third quarter 2014 as part of the results of discontinued operations. Payment of cash exit costs is expected to be completed within one year of the closure date. The net assets of the fabricated components and iron casting businesses were classified as discontinued operations as of June 30, 2014 and December 31, 2013 and the operating results of these businesses have been included in discontinued operations in the Company's consolidated statements of operations for all periods presented.
The following table presents summarized operating results for these discontinued operations (in millions):
 
Three months ended June 30,
 
Six months ended June 30,
 
2014
 
2013
 
2014
 
2013
Sales
$
6.4

 
$
78.7

 
$
11.6

 
$
159.1

Income (loss) before income tax provision (benefit)
$
(0.2
)
 
$
1.2

 
$
(3.0
)
 
$
1.7

Note 4. Inventories
Inventories at June 30, 2014 and December 31, 2013 were as follows (in millions):
 
June 30,
2014
 
December 31,
2013
Raw materials and supplies
$
293.3

 
$
277.6

Work-in-process
1,087.7

 
984.9

Finished goods
151.4

 
162.1

Total inventories at current cost
1,532.4

 
1,424.6

Adjustment from current cost to LIFO cost basis
(8.5
)
 
29.4

Inventory valuation reserves
(51.4
)
 
(84.3
)
Progress payments
(66.0
)
 
(47.6
)
Total inventories, net
$
1,406.5

 
$
1,322.1

Inventories are stated at the lower of cost (last-in, first-out (“LIFO”), first-in, first-out (“FIFO”), and average cost methods) or market, less progress payments. Most of the Company’s inventory is valued utilizing the LIFO costing methodology. Inventory of the Company’s non-U.S. operations is valued using average cost or FIFO methods. The effect of using the LIFO methodology to value inventory, rather than FIFO, increased cost of sales by $37.9 million for the first six months of 2014, which was offset by a $35.0 million reduction in net realizable value reserves on the carrying value of LIFO-based inventory. The first six months of 2013 results included a $23.9 million decrease in cost of sales from using the LIFO costing methodology. The first six months of 2014 results included $13.1 million in inventory valuation charges related to the market-based valuation of industrial titanium products in the Flat Rolled Products segment.
Note 5. Property, Plant and Equipment
Property, plant and equipment at June 30, 2014 and December 31, 2013 was as follows (in millions):
 
June 30,
2014
 
December 31,
2013
Land
$
30.2

 
$
30.2

Buildings
1,032.4

 
1,019.1

Equipment and leasehold improvements
3,618.0

 
3,526.0

 
4,680.6

 
4,575.3

Accumulated depreciation and amortization
(1,763.8
)
 
(1,701.2
)
Total property, plant and equipment, net
$
2,916.8

 
$
2,874.1

The construction in progress portion of property, plant and equipment at June 30, 2014 was $111.1 million.

8

Table of Contents

Note 6. Debt
Debt at June 30, 2014 and December 31, 2013 was as follows (in millions): 
 
June 30,
2014
 
December 31,
2013
Allegheny Technologies 5.875% Notes due 2023
$
500.0

 
$
500.0

Allegheny Technologies 5.95% Notes due 2021
500.0

 
500.0

Allegheny Technologies 4.25% Convertible Notes due 2014

 
402.5

Allegheny Technologies 9.375% Notes due 2019
350.0

 
350.0

Allegheny Ludlum 6.95% debentures due 2025
150.0

 
150.0

ATI Ladish Series B 6.14% Notes due 2016 (a)
12.1

 
18.2

ATI Ladish Series C 6.41% Notes due 2015 (b)
20.6

 
21.1

Domestic Bank Group $400 million unsecured credit facility

 

Foreign credit facilities

 

Industrial revenue bonds, due through 2020, and other
5.4

 
5.5

Total short-term and long-term debt
1,538.1

 
1,947.3

Short-term debt and current portion of long-term debt
17.4

 
419.9

Total long-term debt
$
1,520.7

 
$
1,527.4

 
(a)
Includes fair value adjustments of $0.7 million at June 30, 2014 and $1.0 million at December 31, 2013.
(b)
Includes fair value adjustments of $0.6 million at June 30, 2014 and $1.1 million at December 31, 2013.
On June 2, 2014, the Company repaid the remaining $397.5 million outstanding of the 4.25% Convertible Senior Notes (Convertible Notes). Holders of the Convertible Notes had the option to convert their notes into shares of ATI common stock at any time prior to the close of business on the second scheduled trading day immediately preceding the June 1, 2014 maturity date. Prior to the maturity date, $5.0 million of the Convertible Notes were converted into 120,476 shares of ATI common stock. The conversion rate for the Convertible Notes was 23.9263 shares of ATI common stock per $1,000 principal amount of Convertible Notes, equivalent to a conversion price of approximately $41.795 per share. Other than receiving cash in lieu of fractional shares, holders did not have the option to receive cash instead of shares of common stock upon conversion.
There were no outstanding borrowings made under the Company’s $400 million senior unsecured domestic credit facility expiring May 31, 2018 during the first six months of 2014, although approximately $5 million has been utilized to support the issuance of letters of credit. Under the terms of the facility, the Company may increase the size of the credit facility by up to $100 million without seeking further approval of the lending group. The facility includes a $200 million sublimit for the issuance of letters of credit. This credit facility requires the Company to maintain a leverage ratio (consolidated total indebtedness net of cash on hand in excess of $50 million, divided by consolidated earnings before interest, taxes, depreciation and amortization, and non-cash pension expense for the four prior fiscal quarters) of not greater than 4.0, which is reduced to 3.75 for the quarter ended March 31, 2015 and is then further reduced to 3.50 beginning with the quarter ended June 30, 2015 and for each fiscal quarter thereafter. The credit facility also requires the Company to maintain an interest coverage ratio (consolidated earnings before interest, taxes, and non-cash pension expense divided by interest expense) of not less than 2.0 for the quarter ended March 31, 2014 and for each fiscal quarter thereafter. At June 30, 2014, the leverage ratio was 2.06 and the interest coverage ratio was 4.61. The Company was in compliance with these required ratios during all applicable periods.
The Company has an additional separate credit facility for the issuance of letters of credit. As of June 30, 2014, $32 million in letters of credit were outstanding under this facility.
In addition, Shanghai STAL Precision Stainless Steel Company Limited (STAL), the Company’s Chinese joint venture company in which ATI has a 60% interest, has a 205 million renminbi (approximately $33 million at June 30, 2014 exchange rates) revolving credit facility with a group of banks, which expires August 8, 2014. Negotiations are ongoing to replace this credit facility upon expiration. This credit facility is supported solely by STAL’s financial capability without any guarantees from the joint venture partners. As of June 30, 2014, there were no borrowings under this credit facility.
The ATI Ladish Series B and Series C Notes are guaranteed by ATI and are equally ranked with all of ATI’s existing and future senior unsecured debt.

9

Table of Contents

Note 7. Derivative Financial Instruments and Hedging
As part of its risk management strategy, the Company, from time-to-time, utilizes derivative financial instruments to manage its exposure to changes in raw material prices, energy costs, foreign currencies, and interest rates. In accordance with applicable accounting standards, the Company accounts for most of these contracts as hedges. In general, hedge effectiveness is determined by examining the relationship between offsetting changes in fair value or cash flows attributable to the item being hedged, and the financial instrument being used for the hedge. Effectiveness is measured utilizing regression analysis and other techniques to determine whether the change in the fair market value or cash flows of the derivative exceeds the change in fair value or cash flow of the hedged item. Calculated ineffectiveness, if any, is immediately recognized in the consolidated statements of operations.
The Company sometimes uses futures and swap contracts to manage exposure to changes in prices for forecasted purchases of raw materials, such as nickel and natural gas. Under these contracts, which are generally accounted for as cash flow hedges, the price of the item being hedged is fixed at the time that the contract is entered into and the Company is obligated to make or receive a payment equal to the net change between this fixed price and the market price at the date the contract matures.
The majority of ATI’s products are sold utilizing raw material surcharges and index mechanisms. However, as of June 30, 2014, the Company had entered into financial hedging arrangements primarily at the request of its customers, related to firm orders, for an aggregate notional amount of approximately 10% of its estimated annual nickel requirements. These nickel hedges extend to 2020.
At June 30, 2014, the outstanding financial derivatives used to hedge the Company’s exposure to energy cost volatility included natural gas cost hedges for approximately 70% of its annual forecasted domestic requirements for 2014, approximately 80% for 2015, approximately 50% for 2016, and approximately 15% for 2017, and electricity hedges for Western Pennsylvania operations of approximately 10% of its forecasted on-peak and off-peak requirements for 2014.
While the majority of the Company’s direct export sales are transacted in U.S. dollars, foreign currency exchange contracts are used, from time-to-time, to limit transactional exposure to changes in currency exchange rates for those transactions denominated in a non-U.S. currency. The Company sometimes purchases foreign currency forward contracts that permit it to sell specified amounts of foreign currencies expected to be received from its export sales for pre-established U.S. dollar amounts at specified dates. The forward contracts are denominated in the same foreign currencies in which export sales are denominated. These contracts are designated as hedges of the variability in cash flows of a portion of the forecasted future export sales transactions which otherwise would expose the Company to foreign currency risk. The Company may also enter into foreign currency forward contracts that are not designated as hedges, which are denominated in the same foreign currency in which export sales are denominated. At June 30, 2014, the outstanding financial derivatives, including both hedges and undesignated derivatives, that are used to manage the Company’s exposure to foreign currency, primarily euros, represented approximately 10% of its forecasted total international sales through 2018. In addition, the Company may also designate cash balances held in foreign currencies as hedges of forecasted foreign currency transactions.
The Company may enter into derivative interest rate contracts to maintain a reasonable balance between fixed- and floating-rate debt. There were no unsettled derivative financial instruments related to debt balances for the periods presented.
There are no credit risk-related contingent features in the Company’s derivative contracts, and the contracts contained no provisions under which the Company has posted, or would be required to post, collateral. The counterparties to the Company’s derivative contracts are substantial and creditworthy commercial banks that are recognized market makers. The Company controls its credit exposure by diversifying across multiple counterparties and by monitoring credit ratings and credit default swap spreads of its counterparties. The Company also enters into master netting agreements with counterparties when possible.
The fair values of the Company’s derivative financial instruments are presented below, representing the gross amounts recognized which are not offset by counterparty or by type of item hedged. All fair values for these derivatives were measured using Level 2 information as defined by the accounting standard hierarchy, which includes quoted prices for similar assets or liabilities in active markets, quoted prices for identical or similar assets or liabilities in markets that are not active, and inputs derived principally from or corroborated by observable market data.

10

Table of Contents

(in millions):
Asset derivatives
 
Balance sheet location
 
June 30,
2014
 
December 31,
2013
Derivatives designated as hedging instruments:
 
 
 
 
Foreign exchange contracts
 
Prepaid expenses and other current assets
 
$
0.2

 
$
0.3

Nickel and other raw material contracts
 
Prepaid expenses and other current assets
 
7.1

 
0.1

Natural gas contracts
 
Prepaid expenses and other current assets
 
2.4

 
2.5

Electricity contracts
 
Prepaid expenses and other current assets
 
0.1

 

Nickel and other raw material contracts
 
Other assets
 
5.4

 
0.4

Natural gas contracts
 
Other assets
 
0.6

 
1.0

Total derivatives designated as hedging instruments
 
15.8

 
4.3

Derivatives not designated as hedging instruments:
 
 
 
 
Foreign exchange contracts
 
Prepaid expenses and other current assets
 
0.3

 

Total derivatives not designated as hedging instruments
 
0.3

 

Total asset derivatives
 
 
 
$
16.1

 
$
4.3

Liability derivatives
 
Balance sheet location
 
 
 
 
Derivatives designated as hedging instruments:
 
 
 
 
Natural gas contracts
 
Accrued liabilities
 
$
0.5

 
$
0.4

Nickel and other raw material contracts
 
Accrued liabilities
 
0.1

 
4.5

Foreign exchange contracts
 
Accrued liabilities
 
4.2

 
7.8

Electricity contracts
 
Accrued liabilities
 
0.1

 
0.5

Natural gas contracts
 
Other long-term liabilities
 
1.2

 

Foreign exchange contracts
 
Other long-term liabilities
 
1.7

 
5.4

Nickel and other raw material contracts
 
Other long-term liabilities
 

 
1.3

Total derivatives designated as hedging instruments
 
7.8

 
19.9

Derivatives not designated as hedging instruments:
 
 
 
 
Foreign exchange contracts
 
Accrued liabilities
 
0.2

 
1.7

Total derivatives not designated as hedging instruments
 
0.2

 
1.7

Total liability derivatives
 
 
 
$
8.0

 
$
21.6

For derivative financial instruments that are designated as cash flow hedges, the effective portion of the gain or loss on the derivative is reported as a component of other comprehensive income (OCI) and reclassified into earnings in the same period or periods during which the hedged item affects earnings. Gains and losses on the derivative representing either hedge ineffectiveness or hedge components excluded from the assessment of effectiveness are recognized in current period results. The Company did not use fair value or net investment hedges for the periods presented. The effects of derivative instruments in the tables below are presented net of related income taxes.

11

Table of Contents

Activity with regard to derivatives designated as cash flow hedges for the three and six month periods ended June 30, 2014 and 2013 was as follows (in millions): 
 
Amount of Gain (Loss)
Recognized in OCI on
Derivatives
(Effective Portion)
 
Amount of Gain (Loss)
Reclassified from
Accumulated OCI
into Income
(Effective Portion) (a)
 
Amount of Gain (Loss)
Recognized in Income
on Derivatives (Ineffective
Portion and Amount
Excluded from
Effectiveness Testing) (b)
Derivatives in Cash Flow
Three months ended June 30,
 
Three months ended June 30,
 
Three months ended June 30,
Hedging Relationships
2014
 
2013
 
2014
 
2013
 
2014
 
2013
Nickel and other raw material contracts
$
7.1

 
$
(7.4
)
 
$
0.9

 
$
(1.1
)
 
$

 
$

Natural gas contracts
(1.0
)
 
(1.9
)
 
1.0

 
0.1

 

 

Electricity contracts
(0.1
)
 
(0.1
)
 
0.1

 

 

 

Foreign exchange contracts
1.9

 
(0.4
)
 
(1.7
)
 
0.6

 

 

Total
$
7.9

 
$
(9.8
)
 
$
0.3

 
$
(0.4
)
 
$

 
$


 
Amount of Gain (Loss)
Recognized in OCI on
Derivatives
(Effective Portion)
 
Amount of Gain (Loss)
Reclassified from
Accumulated OCI
into Income
(Effective Portion) (a)
 
Amount of Gain (Loss)
Recognized in Income
on Derivatives (Ineffective
Portion and Amount
Excluded from
Effectiveness Testing) (b)
Derivatives in Cash Flow
Six months ended June 30,
 
Six months ended June 30,
 
Six months ended June 30,
Hedging Relationships
2014
 
2013
 
2014
 
2013
 
2014
 
2013
Nickel and other raw material contracts
$
10.1

 
$
(8.8
)
 
$
(0.8
)
 
$
(1.0
)
 
$

 
$

Natural gas contracts
1.3

 
(0.3
)
 
2.4

 
(0.9
)
 

 

Electricity contracts
0.8

 

 
0.5

 
(0.2
)
 

 

Foreign exchange contracts
1.4

 
7.3

 
(3.1
)
 
1.3

 

 

Total
$
13.6

 
$
(1.8
)
 
$
(1.0
)
 
$
(0.8
)
 
$

 
$

(a)
The gains (losses) reclassified from accumulated OCI into income related to the effective portion of the derivatives are presented in cost of sales in the same period or periods in which the hedged item affects earnings.
(b)
The gains (losses) recognized in income on derivatives related to the ineffective portion and the amount excluded from effectiveness testing are presented in selling and administrative expenses.
Assuming market prices remain constant with those at June 30, 2014, a gain of $3.0 million is expected to be recognized over the next 12 months.
The disclosures of gains or losses presented above for nickel and other raw material contracts and foreign currency contracts do not take into account the anticipated underlying transactions. Since these derivative contracts represent hedges, the net effect of any gain or loss on results of operations may be fully or partially offset.
Derivatives that are not designated as hedging instruments were as follows:
In millions
Amount of Gain (Loss) Recognized
in Income on Derivatives
Derivatives Not Designated
Three months ended June 30,
 
Six months ended June 30,
as Hedging Instruments
2014
 
2013
 
2014
 
2013
Foreign exchange contracts
$
0.9

 
$
(0.4
)
 
$
1.1

 
$
0.4

Changes in the fair value of foreign exchange contract derivatives not designated as hedging instruments are recorded in cost of sales.

12

Table of Contents

Note 8. Fair Value of Financial Instruments
The estimated fair value of financial instruments at June 30, 2014 was as follows: 
 
 
 
Fair Value Measurements at Reporting Date Using
(In millions)
Total
Carrying
Amount
 
Total
Estimated
Fair Value
 
Quoted Prices in
Active Markets for
Identical Assets(Level 1)
 
Significant
Observable
Inputs
(Level 2)
Cash and cash equivalents
$
355.1

 
$
355.1

 
$
355.1

 
$

Derivative financial instruments:
 
 
 
 
 
 
 
Assets
16.1

 
16.1

 

 
16.1

Liabilities
8.0

 
8.0

 

 
8.0

Debt
1,538.1

 
1,751.6

 
1,713.5

 
38.1

The estimated fair value of financial instruments at December 31, 2013 was as follows:
 
 
 
 
Fair Value Measurements at Reporting Date Using
(In millions)
Total
Carrying
Amount
 
Total
Estimated
Fair Value
 
Quoted Prices in
Active Markets for
Identical Assets
(Level 1)
 
Significant
Observable
Inputs
(Level 2)
Cash and cash equivalents
$
1,026.8

 
$
1,026.8

 
$
1,026.8

 
$

Derivative financial instruments:
 
 
 
 
 
 
 
Assets
4.3

 
4.3

 

 
4.3

Liabilities
21.6

 
21.6

 

 
21.6

Debt
1,947.3

 
2,072.6

 
2,027.8

 
44.8

In accordance with accounting standards, fair value is defined as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants at the measurement date. Accounting standards established three levels of a fair value hierarchy that prioritizes the inputs used to measure fair value. This hierarchy requires entities to maximize the use of observable inputs and minimize the use of unobservable inputs. The three levels of inputs used to measure fair value are as follows:
Level 1 – Quoted prices in active markets for identical assets or liabilities.
Level 2 – Observable inputs other than quoted prices included in Level 1, such as quoted prices for similar assets and liabilities in active markets; quoted prices for identical or similar assets and liabilities in markets that are not active; or other inputs that are observable or can be corroborated by observable market data.
Level 3 – Unobservable inputs that are supported by little or no market activity and that are significant to the fair value of the assets and liabilities. This includes certain pricing models, discounted cash flow methodologies and similar techniques that use significant unobservable inputs.

The following methods and assumptions were used by the Company in estimating the fair value of its financial instruments:
Cash and cash equivalents: Fair value was determined using Level 1 information.
Derivative financial instruments: Fair values for derivatives were measured using exchange-traded prices for the hedged items. The fair value was determined using Level 2 information, including consideration of counterparty risk and the Company’s credit risk.
Short-term and long-term debt: The fair values of the Company’s publicly traded debt were based on Level 1 information. The fair values of the other short-term and long-term debt were determined using Level 2 information.

13

Table of Contents

Note 9. Pension Plans and Other Postretirement Benefits
The Company has defined benefit pension plans and defined contribution plans covering substantially all employees. Benefits under the defined benefit pension plans are generally based on years of service and/or final average pay. The Company funds the U.S. pension plans in accordance with the Employee Retirement Income Security Act of 1974, as amended, and the Internal Revenue Code.
The Company also sponsors several postretirement plans covering certain salaried and hourly employees. The plans provide health care and life insurance benefits for eligible retirees. In most plans, Company contributions towards premiums are capped based on the cost as of a certain date, thereby creating a defined contribution. For the non-collectively bargained plans, the Company maintains the right to amend or terminate the plans at its discretion.
For the three month periods ended June 30, 2014 and 2013, the components of pension expense and components of other postretirement benefit expense for the Company’s defined benefit plans included the following (in millions): 
 
Pension Benefits
 
Other Postretirement Benefits
 
Three months ended June 30,
 
Three months ended June 30,
 
2014
 
2013
 
2014
 
2013
Service cost - benefits earned during the year
$
7.3

 
$
10.0

 
$
0.7

 
$
0.8

Interest cost on benefits earned in prior years
33.4

 
30.3

 
6.0

 
5.6

Expected return on plan assets
(46.0
)
 
(43.8
)
 
(0.1
)
 
(0.1
)
Amortization of prior service cost (credit)
0.6

 
0.7

 
(0.7
)
 
(4.5
)
Amortization of net actuarial loss
18.5

 
29.2

 
3.5

 
4.3

Termination benefits
0.3

 

 

 

Total retirement benefit expense
$
14.1

 
$
26.4

 
$
9.4

 
$
6.1

For the six month periods ended June 30, 2014 and 2013, the components of pension expense and components of other postretirement benefit expense for the Company’s defined benefit plans included the following (in millions):
 
Pension Benefits
 
Other Postretirement Benefits
 
Six months ended June 30,
 
Six months ended June 30,
 
2014
 
2013
 
2014
 
2013
Service cost - benefits earned during the year
$
14.7

 
$
20.0

 
$
1.4

 
$
1.6

Interest cost on benefits earned in prior years
66.8

 
60.6

 
12.0

 
11.2

Expected return on plan assets
(92.1
)
 
(87.6
)
 
(0.1
)
 
(0.2
)
Amortization of prior service cost (credit)
1.2

 
1.5

 
(1.5
)
 
(9.1
)
Amortization of net actuarial loss
37.0

 
58.4

 
7.0

 
8.6

Termination benefits
0.3

 

 

 

Total retirement benefit expense
$
27.9

 
$
52.9

 
$
18.8

 
$
12.1

Other postretirement benefit costs for a defined contribution plan were $0.6 million and $1.3 million for the three and six months ended June 30, 2014.
Note 10. Income Taxes
Second quarter 2014 results included a benefit for income taxes of $2.9 million, or 85.3% of loss from continuing operations before income tax, compared to a provision of $0.6 million, or 9.2% of income from continuing operations before income tax, for the comparable period. Income taxes in the second quarter 2014 and 2013 included discrete tax benefits of $2.2 million and $2.6 million, respectively, primarily associated with adjustments to prior years’ taxes.
For the first six months of 2014, the benefit for income taxes was $12.9 million, or 43.9% of loss from continuing operations before income tax, compared to a provision of $4.1 million, or 19.2% of income from continuing operations before income tax, for the comparable period. The first six months of 2014 included a discrete tax benefit of $4.4 million, primarily associated with adjustments to prior years’ and foreign taxes. Excluding the discrete tax benefits, the effective tax rate for the first half 2014 was 29.2%. The first six months of 2013 included a discrete tax benefit of $4.6 million, primarily associated with adjustments to prior years’ taxes and 2013 Federal tax law changes.
For the three and six months ended June 30, 2014, the Company determined that it was unable to make a reliable estimate of

14

Table of Contents

the annual effective tax rate, as relatively small changes in projected results for either the Company’s domestic or international operations can produce a significant variation in its annual effective tax rate. Therefore, the Company recorded a tax benefit for the three and six months ended June 30, 2014 based on the actual effective rate for this period.
Note 11. Business Segments
The Company operates in two business segments: High Performance Materials & Components and Flat Rolled Products. Our measure of segment operating profit, which is used to analyze the performance and results of the business segments, excludes income taxes, corporate expenses, net interest expense, retirement benefit expense, closed company expenses and restructuring costs, if any. Discontinued operations are also excluded. Management believes segment operating profit, as defined, provides an appropriate measure of controllable operating results at the business segment level. Following is certain financial information with respect to the Company’s business segments for the periods indicated (in millions):
 
 
Three months ended June 30,
 
Six months ended June 30,
 
2014
 
2013
 
2014
 
2013
Total sales:
 
 
 
 
 
 
 
High Performance Materials & Components
$
531.4

 
$
520.5

 
$
1,035.5

 
$
1,080.5

Flat Rolled Products
630.5

 
560.6

 
1,160.1

 
1,128.4

 
1,161.9

 
1,081.1

 
2,195.6

 
2,208.9

Intersegment sales:
 
 
 
 
 
 
 
High Performance Materials & Components
17.3

 
16.4

 
37.0

 
36.3

Flat Rolled Products
25.6

 
7.9

 
52.3

 
16.8

 
42.9

 
24.3

 
89.3

 
53.1

Sales to external customers:
 
 
 
 
 
 
 
High Performance Materials & Components
514.1

 
504.1

 
998.5

 
1,044.2

Flat Rolled Products
604.9

 
552.7

 
1,107.8

 
1,111.6

 
$
1,119.0

 
$
1,056.8

 
$
2,106.3

 
$
2,155.8

Operating profit (loss):
 
 
 
 
 
 
 
High Performance Materials & Components
$
85.1

 
$
69.0

 
$
154.2

 
$
144.0

Flat Rolled Products
(19.9
)
 
1.2

 
(45.5
)
 
3.7

Total operating profit
65.2

 
70.2

 
108.7

 
147.7

Corporate expenses
(11.7
)
 
(11.8
)
 
(23.2
)
 
(24.2
)
Interest expense, net
(28.5
)
 
(13.9
)
 
(57.6
)
 
(28.3
)
Closed company and other expenses
(4.3
)
 
(5.5
)
 
(9.3
)
 
(8.9
)
Retirement benefit expense
(24.1
)
 
(32.5
)
 
(48.0
)
 
(65.0
)
Income (loss) from continuing operations before income taxes
$
(3.4
)
 
$
6.5

 
$
(29.4
)
 
$
21.3

Retirement benefit expense represents defined benefit plan pension expense and other postretirement benefit expense for both defined benefit and defined contribution plans. Operating profit with respect to the Company’s business segments excludes any retirement benefit expense. Costs associated with multiemployer pension plans are included in segment operating profit, and costs associated with defined contribution pension plans are included in segment operating profit or corporate expenses, as applicable.
Interest expense, net of interest income, in the second quarter 2014 was $28.5 million, compared to net interest expense of $13.9 million in the second quarter 2013. The increase in interest expense was primarily due to reduced capitalized interest and higher debt levels. Interest expense benefited from the capitalization of interest costs of $1.4 million in the second quarter 2014 compared to $10.6 million in the second quarter 2013. The decrease in capitalized interest is due to a lower construction in progress balance, primarily related to the Flat Rolled Products segment Hot-Rolling and Processing Facility.
Closed company and other expenses primarily includes charges incurred in connection with closed operations and other non-operating income or expense. These items are presented primarily in selling and administrative expenses and in other income in the statements of operations. These items resulted in net charges of $4.3 million for the three months ended June 30, 2014 and $5.5 million for the three months ended June 30, 2013.

15

Table of Contents

Note 12. Redeemable Noncontrolling Interest
The holders of the 15% noncontrolling interest in ATI Flowform Products have a put option to require the Company to purchase their equity interest at a redemption value determinable from a specified formula based on a multiple of EBITDA (subject to a fixed minimum linked to the original acquisition date value). The put option is fully exercisable beginning in the 2017 second quarter, and is also exercisable under certain other circumstances. The put option cannot be separated from the noncontrolling interest, and the combination of a noncontrolling interest and the redemption feature requires classification as redeemable noncontrolling interest in the consolidated balance sheet, separate from Stockholders’ Equity.
The carrying amount of the redeemable noncontrolling interest approximates its maximum redemption value. Any subsequent change in maximum redemption value is adjusted through retained earnings. The redeemable noncontrolling interest was $12.1 million as of June 30, 2014, which was unchanged from the acquisition date value.
Note 13. Per Share Information
The following table sets forth the computation of basic and diluted income from continuing operations per common share: 
 
Three Months Ended
 
Six months ended
(in millions, except per share amounts):
June 30,
 
June 30,
2014
 
2013
 
2014
 
2013
Numerator for basic income (loss) from continuing operations per common share –
 
 
 
 
 
 
 
Income (loss) from continuing operations attributable to ATI
$
(3.8
)
 
$
3.7

 
$
(21.9
)
 
$
13.4

Effect of dilutive securities:
 
 
 
 
 
 
 
4.25% Convertible Notes due 2014

 

 

 

Numerator for diluted income (loss) from continuing operations per common share –
 
 
 
 
 
 
 
Income (loss) from continuing operations available to ATI after assumed conversions
$
(3.8
)
 
$
3.7

 
$
(21.9
)
 
$
13.4

Denominator for basic net income per common share-weighted average shares
107.1

 
106.8

 
107.0

 
106.7

Effect of dilutive securities:
 
 
 
 
 
 
 
Share-based compensation

 
0.4

 

 
0.4

4.25% Convertible Notes due 2014

 

 

 

Denominator for diluted net income per common share – adjusted weighted average shares assuming conversions
107.1

 
107.2

 
107.0

 
107.1

Basic income (loss) from continuing operations attributable to ATI per common share
$
(0.03
)
 
$
0.04

 
$
(0.20
)
 
$
0.13

Diluted income (loss) from continuing operations attributable to ATI per common share
$
(0.03
)
 
$
0.04

 
$
(0.20
)
 
$
0.13

Common stock that would be issuable upon the assumed conversion of the 2014 Convertible Notes (prior to maturity on June 2, 2014) and other option equivalents and contingently issuable shares are excluded from the computation of contingently issuable shares, and therefore, from the denominator for diluted earnings per share, if the effect of inclusion is anti-dilutive. There were 7.0 million and 8.5 million anti-dilutive shares for the three and six month periods ended June 30, 2014, respectively, and 9.6 million anti-dilutive shares for the three and six month periods ended June 30, 2013.
Note 14. Financial Information for Subsidiary and Guarantor Parent
The payment obligations under the $150 million 6.95% debentures due 2025 issued by Allegheny Ludlum, LLC (the “Subsidiary”) are fully and unconditionally guaranteed by Allegheny Technologies Incorporated (the “Guarantor Parent”). In accordance with positions established by the Securities and Exchange Commission, the following financial information sets forth separately financial information with respect to the Subsidiary, the Non-guarantor Subsidiaries and the Guarantor Parent. The principal elimination entries eliminate investments in subsidiaries and certain intercompany balances and transactions.
ATI is the plan sponsor for the U.S. qualified defined benefit pension plan (the “Plan”) which covers certain current and former employees of the Subsidiary and the Non-guarantor Subsidiaries. As a result, the balance sheets presented for the Subsidiary and the Non-guarantor Subsidiaries do not include any Plan assets or liabilities, or the related deferred taxes. The Plan assets,

16

Table of Contents

liabilities and related deferred taxes and pension income or expense are recognized by the Guarantor Parent. Management and royalty fees charged to the Subsidiary and to the Non-guarantor Subsidiaries by the Guarantor Parent have been excluded solely for purposes of this presentation.
Allegheny Technologies Incorporated
Financial Information for Subsidiary and Guarantor Parent
Balance Sheets
June 30, 2014
 
(In millions)
Guarantor
Parent
 
Subsidiary
 
Non-guarantor
Subsidiaries
 
Eliminations
 
Consolidated
Assets:
 
 
 
 
 
 
 
 
 
Cash and cash equivalents
$
4.6

 
$
25.4

 
$
325.1

 
$

 
$
355.1

Accounts receivable, net
0.2

 
253.8

 
396.9

 

 
650.9

Intercompany notes receivable

 

 
2,377.5

 
(2,377.5
)
 

Inventories, net

 
322.4

 
1,084.1

 

 
1,406.5

Prepaid expenses and other current assets
57.3

 
7.5

 
32.9

 

 
97.7

Current assets of discontinued operations

 

 
3.6

 

 
3.6

Total current assets
62.1

 
609.1

 
4,220.1

 
(2,377.5
)
 
2,513.8

Property, plant and equipment, net
2.4

 
1,467.0

 
1,447.4

 

 
2,916.8

Cost in excess of net assets acquired

 
126.6

 
658.5

 

 
785.1

Intercompany notes receivable

 

 
200.0

 
(200.0
)
 

Investment in subsidiaries
6,312.9

 
37.7

 

 
(6,350.6
)
 

Other assets
24.6

 
29.5

 
297.9

 

 
352.0

Non-current assets of discontinued operations

 

 
3.2

 

 
3.2

Total assets
$
6,402.0

 
$
2,269.9

 
$
6,827.1

 
$
(8,928.1
)
 
$
6,570.9

Liabilities and stockholders’ equity:
 
 
 
 
 
 
 
 
 
Accounts payable
$
3.9

 
$
319.0

 
$
233.4

 
$

 
$
556.3

Accrued liabilities
42.7

 
64.3

 
191.5

 

 
298.5

Intercompany notes payable
1,381.9

 
995.6

 

 
(2,377.5
)
 

Deferred income taxes
26.2

 

 

 

 
26.2

Short-term debt and current portion of long-term debt
0.4

 
0.1

 
16.9

 

 
17.4

Current liabilities of discontinued operations

 

 
4.6

 

 
4.6

Total current liabilities
1,455.1

 
1,379.0

 
446.4

 
(2,377.5
)
 
903.0

Long-term debt
1,350.8

 
150.4

 
19.5

 

 
1,520.7

Intercompany notes payable

 
200.0

 

 
(200.0
)
 

Accrued postretirement benefits

 
173.7

 
251.6

 

 
425.3

Pension liabilities
311.2

 
5.3

 
39.3

 

 
355.8

Deferred income taxes
229.4

 

 

 

 
229.4

Other long-term liabilities
76.9

 
19.4

 
49.7

 

 
146.0

Total liabilities
3,423.4

 
1,927.8

 
806.5

 
(2,577.5
)
 
3,580.2

Redeemable noncontrolling interest

 

 
12.1

 

 
12.1

Total stockholders’ equity
2,978.6

 
342.1

 
6,008.5

 
(6,350.6
)
 
2,978.6

Total liabilities and stockholders’ equity
$
6,402.0

 
$
2,269.9

 
$
6,827.1

 
$
(8,928.1
)
 
$
6,570.9



17

Table of Contents


Allegheny Technologies Incorporated
Financial Information for Subsidiary and Guarantor Parent
Statements of Operations and Comprehensive Income
For the three months ended June 30, 2014  
(In millions)
Guarantor
Parent
 
Subsidiary
 
Non-guarantor
Subsidiaries
 
Eliminations
 
Consolidated
Sales
$

 
$
513.8

 
$
605.2

 
$

 
$
1,119.0

Cost of sales
14.8

 
525.2

 
489.5

 

 
1,029.5

Selling and administrative expenses
20.9

 
10.3

 
34.5

 

 
65.7

Income (loss) before interest, other income and income taxes
(35.7
)
 
(21.7
)
 
81.2

 

 
23.8

Interest income (expense), net
(28.6
)
 
(11.2
)
 
11.3

 

 
(28.5
)
Other income (loss) including equity in income of unconsolidated subsidiaries
60.9

 
0.2

 
0.8

 
(60.6
)
 
1.3

Income (loss) from continuing operations before income tax provision (benefit)
(3.4
)
 
(32.7
)
 
93.3

 
(60.6
)
 
(3.4
)
Income tax provision (benefit)
(2.9
)
 
(11.8
)
 
38.6

 
(26.8
)
 
(2.9
)
Income (loss) from continuing operations
(0.5
)
 
(20.9
)
 
54.7

 
(33.8
)
 
(0.5
)
Income (loss) from discontinued operations, net of tax
(0.2
)
 

 
(0.2
)
 
0.2

 
(0.2
)
Net income (loss)
(0.7
)
 
(20.9
)
 
54.5

 
(33.6
)
 
(0.7
)
Less: Net income attributable to noncontrolling interests

 

 
3.3

 

 
3.3

Net income (loss) attributable to ATI
$
(0.7
)
 
$
(20.9
)
 
$
51.2

 
$
(33.6
)
 
$
(4.0
)
Comprehensive income (loss) attributable to ATI
$
28.2

 
$
(18.8
)
 
$
60.2

 
$
(43.6
)
 
$
26.0


Allegheny Technologies Incorporated
Financial Information for Subsidiary and Guarantor Parent
Statements of Operations and Comprehensive Income
For the six months ended June 30, 2014  
(In millions)
Guarantor
Parent
 
Subsidiary
 
Non-guarantor
Subsidiaries
 
Eliminations
 
Consolidated
Sales
$

 
$
941.7

 
$
1,164.6

 
$

 
$
2,106.3

Cost of sales
27.1

 
964.8

 
954.7

 

 
1,946.6

Selling and administrative expenses
48.0

 
20.4

 
65.0

 

 
133.4

Income (loss) before interest, other income and income taxes
(75.1
)
 
(43.5
)
 
144.9

 

 
26.3

Interest income (expense), net
(57.1
)
 
(21.8
)
 
21.3

 

 
(57.6
)
Other income (loss) including equity in income of unconsolidated subsidiaries
102.8

 
0.5

 
1.4

 
(102.8
)
 
1.9

Income (loss) from continuing operations before income tax provision (benefit)
(29.4
)
 
(64.8
)
 
167.6

 
(102.8
)
 
(29.4
)
Income tax provision (benefit)
(12.9
)
 
(23.1
)
 
65.0

 
(41.9
)
 
(12.9
)
Income (loss) from continuing operations
(16.5
)
 
(41.7
)
 
102.6

 
(60.9
)
 
(16.5
)
Income (loss) from discontinued operations, net of tax
(2.1
)
 

 
(2.1
)
 
2.1

 
(2.1
)
Net income (loss)
(18.6
)
 
(41.7
)
 
100.5

 
(58.8
)
 
(18.6
)
Less: Net income attributable to noncontrolling interests

 

 
5.4

 

 
5.4

Net income (loss) attributable to ATI
$
(18.6
)
 
$
(41.7
)
 
$
95.1

 
$
(58.8
)
 
$
(24.0
)
Comprehensive income (loss) attributable to ATI
$
27.4

 
$
(37.6
)
 
$
102.7

 
$
(67.5
)
 
$
25.0



18

Table of Contents

Condensed Statements of Cash Flows
For the six months ended June 30, 2014  
(In millions)
Guarantor
Parent
 
Subsidiary
 
Non-guarantor
Subsidiaries
 
Eliminations
 
Consolidated
Cash flows provided by (used in) operating activities
$
(45.6
)
 
$
(196.9
)
 
$
205.0

 
$

 
$
(37.5
)
Investing Activities:
 
 
 
 
 
 
 
 
 
Purchases of property, plant and equipment

 
(72.4
)
 
(25.5
)
 

 
(97.9
)
Purchases of businesses, net of cash acquired

 

 
(92.5
)
 

 
(92.5
)
Net receipts/(payments) on intercompany activity

 

 
(766.5
)
 
766.5

 

Asset disposals and other

 
1.5

 
0.6

 

 
2.1

Cash flows provided by (used in) investing activities

 
(70.9
)
 
(883.9
)
 
766.5

 
(188.3
)
Financing Activities:
 
 
 
 
 
 
 
 
 
Payments on long-term debt and capital leases
(397.7
)
 

 
(5.7
)
 

 
(403.4
)
Net receipts/(payments) on intercompany activity
486.8

 
279.7

 

 
(766.5
)
 

Dividends paid to stockholders
(38.6
)
 

 

 

 
(38.6
)
Other
(3.9
)
 

 

 

 
(3.9
)
Cash flows provided by (used in) financing activities
46.6

 
279.7

 
(5.7
)
 
(766.5
)
 
(445.9
)
Increase (decrease) in cash and cash equivalents
$
1.0

 
$
11.9

 
$
(684.6
)
 
$

 
$
(671.7
)

19

Table of Contents

Allegheny Technologies Incorporated
Financial Information for Subsidiary and Guarantor Parent
Balance Sheets
December 31, 2013
 
Guarantor
 
 
 
Non-guarantor
 
 
 
 
(In millions)
Parent
 
Subsidiary
 
Subsidiaries
 
Eliminations
 
Consolidated
Assets:
 
 
 
 
 
 
 
 
 
Cash and cash equivalents
$
3.6

 
$
13.5

 
$
1,009.7

 
$

 
$
1,026.8

Accounts receivable, net
0.3

 
179.4

 
348.5

 

 
528.2

Intercompany notes receivable

 

 
1,589.4

 
(1,589.4
)
 

Inventories, net

 
295.5

 
1,026.6

 

 
1,322.1

Prepaid expenses and other current assets
26.2

 
6.5

 
34.9

 

 
67.6

Current assets of discontinued operations

 

 
6.1

 

 
6.1

Total current assets
30.1

 
494.9

 
4,015.2

 
(1,589.4
)
 
2,950.8

Property, plant and equipment, net
2.9

 
1,397.5

 
1,473.7

 

 
2,874.1

Cost in excess of net assets acquired

 
112.1

 
615.8

 

 
727.9

Intercompany notes receivable

 

 
200.0

 
(200.0
)
 

Investment in subsidiaries
6,170.8

 
37.7

 

 
(6,208.5
)
 

Other assets
35.7

 
32.0

 
274.3

 

 
342.0

Non-current assets of discontinued operations

 

 
3.7

 

 
3.7

Total assets
$
6,239.5

 
$
2,074.2

 
$
6,582.7

 
$
(7,997.9
)
 
$
6,898.5

Liabilities and stockholders’ equity:
 
 
 
 
 
 
 
 
 
Accounts payable
$
3.1

 
$
310.5

 
$
158.2

 
$

 
$
471.8

Accrued liabilities
51.6

 
56.6

 
202.7

 

 
310.9

Intercompany notes payable
825.6

 
763.8

 

 
(1,589.4
)
 

Deferred income taxes
3.5

 

 

 

 
3.5

Short-term debt and current portion of long-term debt
402.9

 
0.1

 
16.9

 

 
419.9

Current liabilities of discontinued operations

 

 
4.9

 

 
4.9

Total current liabilities
1,286.7

 
1,131.0

 
382.7

 
(1,589.4
)
 
1,211.0

Long-term debt
1,350.8

 
150.4

 
26.2

 

 
1,527.4

Intercompany notes payable

 
200.0

 

 
(200.0
)
 

Accrued postretirement benefits

 
179.7

 
262.7

 

 
442.4

Pension liabilities
323.0

 
5.6

 
39.6

 

 
368.2

Deferred income taxes
206.6

 

 

 

 
206.6

Other long-term liabilities
77.7

 
20.2

 
50.3

 

 
148.2

Total liabilities
3,244.8

 
1,686.9

 
761.5

 
(1,789.4
)
 
3,903.8

Total stockholders’ equity
2,994.7

 
387.3

 
5,821.2

 
(6,208.5
)
 
2,994.7

Total liabilities and stockholders’ equity
$
6,239.5

 
$
2,074.2

 
$
6,582.7

 
$
(7,997.9
)
 
$
6,898.5





20

Table of Contents

Allegheny Technologies Incorporated
Financial Information for Subsidiary and Guarantor Parent
Statements of Operations and Comprehensive Income
For the three months ended June 30, 2013  
(In millions)
Guarantor
Parent
 
Subsidiary
 
Non-guarantor
Subsidiaries
 
Eliminations
 
Consolidated
Sales
$

 
$
475.8

 
$
581.0

 
$

 
$
1,056.8

Cost of sales
18.6

 
468.5

 
482.0

 

 
969.1

Selling and administrative expenses
25.0

 
9.5

 
32.6

 

 
67.1

Income (loss) before interest, other income and income taxes
(43.6
)
 
(2.2
)
 
66.4

 

 
20.6

Interest expense, net
(16.5
)
 
(14.7
)
 
17.3

 

 
(13.9
)
Other income (loss) including equity in income of unconsolidated subsidiaries
66.6

 
5.9

 
(8.7
)
 
(64.0
)
 
(0.2
)
Income (loss) from continuing operations before income tax provision (benefit)
6.5

 
(11.0
)
 
75.0

 
(64.0
)
 
6.5

Income tax provision (benefit)
0.6

 
(0.7
)
 
23.9

 
(23.2
)
 
0.6

Income (loss) from continuing operations
5.9

 
(10.3
)
 
51.1

 
(40.8
)
 
5.9

Income (loss) from discontinued operations, net of tax
0.7




0.7


(0.7
)
 
0.7

Net income (loss)
6.6

 
(10.3
)
 
51.8

 
(41.5
)
 
6.6

Less: Net income attributable to noncontrolling interests

 

 
2.2

 

 
2.2

Net income (loss) attributable to ATI
$
6.6

 
$
(10.3
)
 
$
49.6

 
$
(41.5
)
 
$
4.4

Comprehensive income (loss) attributable to ATI
$
19.9

 
$
(10.2
)
 
$
52.8

 
$
(46.7
)
 
$
15.8


Allegheny Technologies Incorporated
Financial Information for Subsidiary and Guarantor Parent
Statements of Operations and Comprehensive Income
For the six months ended June 30, 2013  
(In millions)
Guarantor
Parent
 
Subsidiary
 
Non-guarantor
Subsidiaries
 
Eliminations
 
Consolidated
Sales
$

 
$
952.9

 
$
1,202.9

 
$

 
$
2,155.8

Cost of sales
36.1

 
935.2

 
996.3

 

 
1,967.6

Selling and administrative expenses
53.5

 
19.9

 
66.1

 

 
139.5

Income (loss) before interest, other income and income taxes
(89.6
)
 
(2.2
)
 
140.5

 

 
48.7

Interest expense, net
(28.2
)
 
(17.3
)
 
17.2

 

 
(28.3
)
Other income (loss) including equity in income of unconsolidated subsidiaries
139.1

 
0.5

 
0.5

 
(139.2
)
 
0.9

Income (loss) from continuing operations before income tax provision (benefit)
21.3

 
(19.0
)
 
158.2

 
(139.2
)
 
21.3

Income tax provision (benefit)
4.1

 
(3.2
)
 
52.9

 
(49.7
)
 
4.1

Income (loss) from continuing operations
17.2

 
(15.8
)
 
105.3

 
(89.5
)
 
17.2

Income (loss) from discontinued operations, net of tax
1.0

 

 
1.0

 
(1.0
)
 
1.0

Net income (loss)
18.2

 
(15.8
)
 
106.3

 
(90.5
)
 
18.2

Less: Net income attributable to noncontrolling interests

 

 
3.8

 

 
3.8

Net income (loss) attributable to ATI
$
18.2

 
$
(15.8
)
 
$
102.5

 
$
(90.5
)
 
$
14.4

Comprehensive income (loss) attributable to ATI
$
45.2

 
$
(15.6
)
 
$
92.8

 
$
(83.4
)
 
$
39.0


21

Table of Contents


Condensed Statements of Cash Flows
For the six months ended June 30, 2013
(In millions)
Guarantor
Parent
 
Subsidiary
 
Non-guarantor
Subsidiaries
 
Eliminations
 
Consolidated
Cash flows provided by (used in) operating activities
$
(39.1
)
 
$
(86.7
)
 
$
208.1

 
$
(24.3
)
 
$
58.0

Investing Activities:
 
 
 
 
 
 
 
 
 
Purchases of property, plant and equipment
(0.1
)
 
(201.7
)
 
(21.9
)
 

 
(223.7
)
Net receipts/(payments) on intercompany activity

 

 
(358.7
)
 
358.7

 

Asset disposals and other

 
0.1

 
0.4

 

 
0.5

Cash flows provided by (used in) investing activities
(0.1
)
 
(201.6
)
 
(380.2
)
 
358.7

 
(223.2
)
Financing Activities:
 
 
 
 
 
 
 
 
 
Net receipts/(payments) on intercompany activity
78.7

 
280.0

 

 
(358.7
)
 

Dividends paid to stockholders
(38.4
)
 

 
(24.3
)
 
24.3

 
(38.4
)
Other
(3.7
)
 
(0.1
)
 
(23.1
)
 

 
(26.9
)
Cash flows provided by (used in) financing activities
36.6

 
279.9

 
(47.4
)
 
(334.4
)
 
(65.3
)
Decrease in cash and cash equivalents
$
(2.6
)
 
$
(8.4
)
 
$
(219.5
)
 
$

 
$
(230.5
)

The condensed consolidating statements of cash flows for the six months ended June 30, 2013 have been revised to reclassify intercompany activities between operating, investing and financing activities, rather than entirely as financing activities, as previously presented. These revisions increased (decreased) cash flows provided by (used in) the consolidating statements of cash flows as follows, in millions: operating activities for the Guarantor Parent, Subsidiary, Non-guarantor Subsidiaries and Eliminations, $(18.0), $(138.3), $180.6 and $(24.3), respectively; investing activities for the Non-guarantor Subsidiaries and Eliminations, $(358.7) and $358.7, respectively; and financing activities for the Guarantor Parent, Subsidiary, Non-guarantor Subsidiaries and Eliminations, $18.0, $138.3, $178.1 and $(334.4), respectively.

22

Table of Contents

Note 15. Accumulated Other Comprehensive Income (Loss)
The changes in accumulated other comprehensive income (loss) (AOCI) by component, net of tax, for the three month period ended June 30, 2014 were as follows (in millions):
 
Post-
retirement
benefit plans
 
Currency
translation
adjustment
 
Unrealized
holding gains
on securities
 
Derivatives
 
Total
Attributable to ATI:
 
 
 
 
 
 
 
 
 
 
 
 
 
Balance, March 31, 2014
$
(705.5
)
 
$
13.8

 
$

 
$
(2.6
)
 
$
(694.3
)
OCI before reclassifications
 

 
 
8.9

 
 
0.1

 
 
7.9

 
16.9

Amounts reclassified from AOCI
(a)
13.5

 
(b)

 
(b)

 
(c)
(0.3
)
 
13.2

Net current-period OCI
 
13.5

 
 
8.9

 
 
0.1

 
 
7.6

 
30.1

Balance, June 30, 2014
$
(692.0
)
 
$
22.7

 
$
0.1

 
$
5.0

 
$
(664.2
)
Attributable to noncontrolling interests:
 
 
 
 
 
 
 
 
 
 
 
 
 
Balance, March 31, 2014
$

 
$
$
25.3

 
$

 
$

 
$
25.3

OCI before reclassifications
 

 
 
(1.2
)
 
 

 
 

 
(1.2
)
Amounts reclassified from AOCI
 

 
(b)

 
 

 
 

 

Net current-period OCI
 

 
 
(1.2
)
 
 

 
 

 
(1.2
)
Balance, June 30, 2014
$

 
$
24.1

 
$

 
$

 
$
24.1


The changes in accumulated other comprehensive income (loss) (AOCI) by component, net of tax, for the six month period ended June 30, 2014 were as follows (in millions): 
 
Post-
retirement
benefit plans
 
Currency
translation
adjustment
 
Unrealized
holding gains
on securities
 
Derivatives
 
Total
Attributable to ATI:
 
 
 
 
 
 
 
 
 
 
 
 
 
Balance, December 31, 2013
$
(718.9
)
 
$
15.3

 
$

 
$
(9.6
)
 
$
(713.2
)
OCI before reclassifications
 

 
 
7.4

 
 
0.1

 
 
13.6

 
21.1

Amounts reclassified from AOCI
(a)
26.9

 
(b)

 
(b)

 
(c)
1.0

 
27.9

Net current-period OCI
 
26.9

 
 
7.4

 
 
0.1

 
 
14.6

 
49.0

Balance, June 30, 2014
$
(692.0
)
 
$
22.7

 
$
0.1

 
$
5.0

 
$
(664.2
)
Attributable to noncontrolling interests:
 
 
 
 
 
 
 
 
 
 
 
 
 
Balance, December 31, 2013
$

 
$
$
27.1

 
$

 
$

 
$
27.1

OCI before reclassifications
 

 
 
(3.0
)
 
 

 
 

 
(3.0
)
Amounts reclassified from AOCI
 

 
(b)

 
 

 
 

 

Net current-period OCI
 

 
 
(3.0
)
 
 

 
 

 
(3.0
)
Balance, June 30, 2014
$

 
$
24.1

 
$

 
$

 
$
24.1

 
(a)
Amounts were included in net periodic benefit cost for pension and other postretirement benefit plans (see Note 9).
(b)
No amounts were reclassified to earnings.
(c)
Amounts were included in cost of goods sold in the period or periods the hedged item affects earnings (see Note 7).

23

Table of Contents

The changes in accumulated other comprehensive income (loss) (AOCI) by component, net of tax, for the three month period ended June 30, 2013 were as follows (in millions):
 
Post-
retirement
benefit plans
 
Currency
translation
adjustment
 
Unrealized
holding gains
on securities
 
Derivatives
 
Total
Attributable to ATI:
 
 
 
 
 
 
 
 
 
 
 
 
 
Balance, March 31, 2013
$
(1,011.8
)
 
$
(10.1
)
 
$

 
$
5.7

 
$
(1,016.2
)
OCI before reclassifications
 

 
 
2.6

 
 
(0.1
)
 
 
(9.8
)
 
(7.3
)
Amounts reclassified from AOCI
(a)
18.3

 
(b)

 
(b)

 
(c)
0.4

 
18.7

Net current-period OCI
 
18.3

 
 
2.6

 
 
(0.1
)
 
 
(9.4
)
 
11.4

Balance, June 30, 2013
$
(993.5
)
 
$
(7.5
)
 
$
(0.1
)
 
$
(3.7
)
 
$
(1,004.8
)
Attributable to noncontrolling interests:
 
 
 
 
 
 
 
 
 
 
 
 
 
Balance, March 31, 2013
$

 
$
24.2

 
$

 
$

 
$
24.2

OCI before reclassifications
 

 
 
1.9

 
 

 
 

 
1.9

Amounts reclassified from AOCI
 

 
(b)

 
 

 
 

 

Net current-period OCI
 

 
 
1.9

 
 

 
 

 
$
1.9

Balance, June 30, 2013
$

 
$
26.1

 
$

 
$

 
$
26.1


The changes in accumulated other comprehensive income (loss) (AOCI) by component, net of tax, for the six month period ended June 30, 2013 were as follows (in millions): 
 
Post-
retirement
benefit plans
 
Currency
translation
adjustment
 
Unrealized
holding gains
on securities
 
Derivatives
 
Total
Attributable to ATI:
 
 
 
 
 
 
 
 
 
 
 
 
 
Balance, December 31, 2012
$
(1,030.0
)
 
$
3.4

 
$
(0.1
)
 
$
(2.7
)
 
$
(1,029.4
)
OCI before reclassifications
 

 
 
(10.9
)
 
 

 
 
(1.8
)
 
(12.7
)
Amounts reclassified from AOCI
(a)
36.5

 
(b)

 
(b)

 
(c)
0.8

 
37.3

Net current-period OCI
 
36.5

 
 
(10.9
)
 
 

 
 
(1.0
)
 
24.6

Balance, June 30, 2013
$
(993.5
)
 
$
(7.5
)
 
$
(0.1
)
 
$
(3.7
)
 
$
(1,004.8
)
Attributable to noncontrolling interests:
 
 
 
 
 
 
 
 
 
 
 
 
 
Balance, December 31, 2012
$

 
$
$
23.7

 
$

 
$

 
$
23.7

OCI before reclassifications
 

 
 
2.4

 
 

 
 

 
2.4

Amounts reclassified from AOCI
 

 
(b)

 
 

 
 

 

Net current-period OCI
 

 
 
2.4

 
 

 
 

 
2.4

Balance, June 30, 2013
$

 
$
26.1

 
$

 
$

 
$
26.1

 
(a)
Amounts were included in net periodic benefit cost for pension and other postretirement benefit plans (see Note 9).
(b)
No amounts were reclassified to earnings.
(c)
Amounts were included in cost of goods sold in the period or periods the hedged item affects earnings (see Note 7).




24

Table of Contents

Reclassifications out of AOCI for the three and six month periods ended June 30, 2014 and June 30, 2013 were as follows: 
 
 
Amount reclassified from AOCI (c)
 
 
Details about AOCI Components
(in millions)
 
Three months ended June 30, 2014
 
Three months ended June 30, 2013
 
Six months ended June 30, 2014
 
Six months ended June 30, 2013
 
 
Affected line item in the
statements of operations
Postretirement benefit plans
 
 
 
 
 
 
 
 
  
 
 
Prior service (cost) credit
 
$
0.1

 
$
3.8

(a) 
$
0.3

 
$
7.6

(a) 
 
 
Actuarial losses
 
(22.0
)
 
(33.5
)
(a) 
(44.0
)
 
(67.0
)
(a) 
 
 
 
 
(21.9
)
 
(29.7
)
(c) 
(43.7
)
 
(59.4
)
(c) 
 
Total before tax
 
 
(8.4
)
 
(11.4
)
 
(16.8
)
 
(22.9
)
 
 
Tax provision (benefit)
 
 
$
(13.5
)
 
$
(18.3
)
 
$
(26.9
)
 
$
(36.5
)
 
 
Net of tax
Derivatives
 
 
 
 
 
 
 
 
 
 
 
Nickel and other raw material contracts
 
$
1.5

 
$
(1.6
)
(b) 
$
(1.3
)
 
$
(1.5
)
(b) 
 
 
Natural gas contracts
 
1.6

 
0.2

(b) 
3.9

 
(1.5
)
(b) 
 
 
Electricity contracts
 
0.1

 

(b) 
0.8

 
(0.3
)
(b) 
 
 
Foreign exchange contracts
 
(2.7
)
 
0.9

(b) 
(5.0
)
 
2.1

(b) 
 
 
 
 
0.5

 
(0.5
)
(c) 
(1.6
)
 
(1.2
)
(c) 
 
Total before tax
 
 
0.2

 
(0.1
)
 
(0.6
)
 
(0.4
)
 
 
Tax provision (benefit)
 
 
$
0.3

 
$
(0.4
)
 
$
(1.0
)
 
$
(0.8
)
 
 
Net of tax
 
(a)
Amounts are included in the computation of pension and other postretirement benefit expense, which is reported in both cost of goods sold and selling and administrative expenses. For additional information, see Note 9.
(b)
Amounts are included in cost of goods sold in the period or periods the hedged item affects earnings. For additional information, see Note 7.
(c)
For pretax items, positive amounts are income and negative amounts are expense in terms of the impact to net income. Tax effects are presented in conformity with ATI’s presentation in the consolidated statements of operations.
Note 16. Commitments and Contingencies
The Company is subject to various domestic and international environmental laws and regulations that govern the discharge of pollutants and disposal of wastes, and which may require that it investigate and remediate the effects of the release or disposal of materials at sites associated with past and present operations. The Company could incur substantial cleanup costs, fines, and civil or criminal sanctions, third party property damage or personal injury claims as a result of violations or liabilities under these laws or noncompliance with environmental permits required at its facilities. The Company is currently involved in the investigation and remediation of a number of its current and former sites, as well as third party sites.
Environmental liabilities are recorded when the Company’s liability is probable and the costs are reasonably estimable. In many cases, however, the Company is not able to determine whether it is liable or, if liability is probable, to reasonably estimate the loss or range of loss. Estimates of the Company’s liability remain subject to additional uncertainties, including the nature and extent of site contamination, available remediation alternatives, the extent of corrective actions that may be required, and the number, participation, and financial condition of other potentially responsible parties (“PRPs”). The Company adjusts its accruals to reflect new information as appropriate. Future adjustments could have a material adverse effect on the Company’s consolidated results of operations in a given period, but the Company cannot reliably predict the amounts of such future adjustments.
At June 30, 2014, the Company’s reserves for environmental remediation obligations totaled approximately $16 million, of which $8 million was included in other current liabilities. The reserve includes estimated probable future costs of $4 million for federal Superfund and comparable state-managed sites; $9 million for formerly owned or operated sites for which the Company has remediation or indemnification obligations; $2 million for owned or controlled sites at which Company operations have been discontinued; and $1 million for sites utilized by the Company in its ongoing operations. The Company continues to evaluate whether it may be able to recover a portion of past and future costs for environmental liabilities from third parties and to pursue such recoveries where appropriate.

25

Table of Contents

Based on currently available information, it is reasonably possible that costs for recorded matters may exceed the Company’s recorded reserves by as much as $11 million. However, future investigation or remediation activities may result in the discovery of additional hazardous materials, potentially higher levels of contamination than discovered during prior investigation, and may impact costs of the success or lack thereof in remedial solutions. Therefore, future developments, administrative actions or liabilities relating to environmental matters could have a material adverse effect on the Company’s consolidated financial condition or results of operations.
The timing of expenditures depends on a number of factors that vary by site. The Company expects that it will expend present accruals over many years and that remediation of all sites with which it has been identified will be completed within thirty years.
See Note 18. Commitments and Contingencies to the Company’s consolidated financial statements in the Company’s Annual Report on Form 10-K for its fiscal year ended December 31, 2013 for a discussion of legal proceedings affecting the Company.
A number of other lawsuits, claims and proceedings have been or may be asserted against the Company relating to the conduct of its currently and formerly owned businesses, including those pertaining to product liability, patent infringement, commercial, government contracting, construction, employment, employee and retiree benefits, taxes, environmental, health and safety and occupational disease, and stockholder and corporate governance matters. While the outcome of litigation cannot be predicted with certainty, and some of these lawsuits, claims or proceedings may be determined adversely to the Company, management does not believe that the disposition of any such pending matters is likely to have a material adverse effect on the Company’s financial condition or liquidity, although the resolution in any reporting period of one or more of these matters could have a material adverse effect on the Company’s consolidated results of operations for that period.
Item 2.
Management’s Discussion and Analysis of Financial Condition and Results of Operations
Overview
ATI is one of the largest and most diversified specialty materials and components producers in the world. We use innovative technologies to offer global markets a wide range of specialty materials solutions. Our products include titanium and titanium alloys, nickel-based alloys and superalloys, zirconium and related alloys, advanced powder alloys, stainless and specialty steel alloys, grain-oriented electrical steel, forgings, castings, components, and machining capabilities. Our specialty materials are produced in a wide range of alloys and product forms and are selected for use in applications that demand metals having exceptional hardness, toughness, strength, resistance to heat, corrosion or abrasion, or a combination of these characteristics. We are a fully integrated supplier, from alloy development, to raw materials (for titanium sponge) to melting and hot-working (for other specialty alloy systems), through highly engineered finished components. Our strategic vision is to be an aligned and integrated specialty materials and components company. In conjunction with this initiative, in the first quarter of 2014, the High Performance Metals segment was renamed the High Performance Materials & Components segment. Individual business unit names within each segment were also changed to reflect their aligned and integrated product focus. There was no change to the business units that comprise each business segment or the manner in which resources are allocated and performance is assessed for the business units by management. Therefore, there was no change to business segment reporting as a result of this initiative.
Our second quarter 2014 results from continuing operations were sales of $1.119 billion and a net loss attributable to ATI of $3.8 million, or $(0.03) per share, compared to second quarter 2013 sales of $1.057 billion and net income attributable to ATI of $3.7 million, or $0.04 per share. Compared to the second quarter 2013, sales increased 2% in the High Performance Materials & Components business segment and 9% in the Flat Rolled Products business segment. For the first half of 2014, results from continuing operations were sales of $2.106 billion and a net loss attributable to ATI of $21.9 million, or $(0.20) per share, compared to first half 2013 sales of $2.156 billion and net income attributable to ATI of $13.4 million, or $0.13 per share. Compared to the first half of 2013, sales decreased 4% in the High Performance Materials & Components business segment and were flat in the Flat Rolled Products business segment. Operating results for the second quarter and first half of 2014 reflect higher shipment volumes for most products, which more than offset lower selling prices, and include the effects of raw material surcharges and index pricing mechanisms, compared to the second quarter and first half of 2013.

26

Table of Contents

Demand from the global aerospace and defense, oil & gas/chemical process industry, electrical energy, and medical markets represented 67% of our sales for the three and six month periods ended June 30, 2014. Comparative information for our overall revenues (in millions) by market and their respective percentages of total revenues for the three and six month periods ended June 30, 2014 and 2013 were as follows:
 
 
Three Months Ended

Three Months Ended
Market
June 30, 2014
 
June 30, 2013
Aerospace & Defense
$
367.3

 
33
%
 
$
363.9

 
34
%
Oil & Gas/Chemical Process Industry
208.6

 
19
%
 
200.7

 
19
%
Electrical Energy
119.0

 
10
%
 
121.7

 
12
%
Medical
56.6

 
5
%
 
52.5

 
5
%
Subtotal - Key Markets
751.5

 
67
%
 
738.8

 
70
%
Automotive
110.0

 
10
%
 
91.2

 
9
%
Food Equipment & Appliances
75.2

 
7
%
 
63.7

 
6
%
Construction/Mining
73.3

 
7
%
 
69.9

 
7
%
Transportation
47.2

 
4
%
 
35.3

 
3
%
Electronics/Computers/Communication
36.9

 
3
%
 
35.2

 
3
%
Conversion Services & Other
24.9

 
2
%
 
22.7

 
2
%
Total
$
1,119.0

 
100
%
 
$
1,056.8

 
100
%
 
Six months ended
 
Six months ended
Market
June 30, 2014
 
June 30, 2013
Aerospace & Defense
$
717.4

 
34
%
 
$
756.9

 
35
%
Oil & Gas/Chemical Process Industry
370.4

 
17
%
 
392.3

 
18
%
Electrical Energy
224.7

 
11
%
 
244.6

 
11
%
Medical
104.6

 
5
%
 
108.9

 
5
%
Subtotal - Key Markets
1,417.1

 
67
%
 
1,502.7

 
69
%
Automotive
208.9

 
10
%
 
176.7

 
8
%
Construction/Mining
148.2

 
7
%
 
143.9

 
7
%
Food Equipment & Appliances
129.5

 
6
%
 
128.9

 
6
%
Transportation
83.6

 
4
%
 
81.9

 
4
%
Electronics/Computers/Communication
68.7

 
3
%
 
71.5

 
3
%
Conversion Services & Other
50.3

 
3
%
 
50.2

 
3
%
Total
$
2,106.3

 
100
%
 
$
2,155.8

 
100
%

27

Table of Contents

For the second quarter 2014, international sales were $423 million and represented 38% of total sales, compared to $429 million or 41% of total sales for the second quarter 2013. Sales of our high-value products (titanium and titanium alloys, nickel-based alloys and specialty alloys, zirconium and related alloys, precision forgings, castings and components, grain-oriented electrical steel, precision and engineered strip) represented 76% of total sales for the three months ended June 30, 2014. Comparative information for our major high-value and standard products based on their percentages of our total sales is as follows: 

Three months ended June 30,
 
2014

2013
High-Value Products
 
 
 
Nickel-based alloys and specialty alloys
26
%
 
26
%
Titanium and titanium alloys
14
%
 
15
%
Precision and engineered strip
13
%
 
13
%
Precision forgings, castings and components
13
%
 
14
%
Zirconium and related alloys
6
%
 
6
%
Grain-oriented electrical steel
4
%
 
4
%
Total High-Value Products
76
%
 
78
%
Standard Products
 
 
 
Specialty stainless sheet
12
%
 
10
%
Stainless steel sheet
9
%
 
9
%
Stainless steel plate and other
3
%
 
3
%
Total Standard Products
24
%
 
22
%
Grand Total
100
%
 
100
%
For the first half of 2014, international sales were $797 million and represented 38% of total sales, compared to $858 million or 40% of total sales for the first half of 2013. Sales of our high-value products (titanium and titanium alloys, nickel-based alloys and specialty alloys, zirconium and related alloys, precision forgings, castings and components, grain-oriented electrical steel, precision and engineered strip) represented 77% of total sales for the six months ended June 30, 2014. Comparative information for our major high-value and standard products based on their percentages of our total sales is as follows:
 
Six months ended June 30,
 
2014
 
2013
High-Value Products
 
 
 
Nickel-based alloys and specialty alloys
26
%
 
25
%
Titanium and titanium alloys
15
%
 
16
%
Precision forgings, castings and components
13
%
 
14
%
Precision and engineered strip
13
%
 
12
%
Zirconium and related alloys
6
%
 
6
%
Grain-oriented electrical steel
4
%
 
4
%
Total High-Value Products
77
%
 
77
%
Standard Products
 
 
 
Specialty stainless sheet
11
%
 
10
%
Stainless steel sheet
9
%
 
9
%
Stainless steel plate and other
3
%
 
4
%
Total Standard Products
23
%
 
23
%
Grand Total
100
%
 
100
%
Total titanium mill product shipments, including Uniti joint venture conversion, were 9.3 million pounds in the second quarter 2014, bringing the first half 2014 total to 18.0 million pounds. These volumes represent a 1% decrease compared to the second quarter 2013 and an 8% decrease compared to the first half of 2013, primarily due to lower project-based business.

28

Table of Contents

Segment operating profit for the second quarter 2014 was $65.2 million, or 5.8% of sales, compared to $70.2 million, or 6.6% of sales for the second quarter 2013. Second quarter 2014 results included $28.9 million in LIFO inventory valuation reserve charges, predominantly in the Flat Rolled Products segment, which were largely offset by the reversal of the remaining $26.0 million of net realizable value inventory valuation reserves. Second quarter 2013 segment results included a $24.4 million LIFO inventory valuation reserve benefit. For the first half 2014, segment operating profit was $108.7 million, or 5.2% of sales, compared to $147.7 million, or 6.9% of sales for the first half 2013. Segment operating profit as a percentage of sales for the three and six month periods ended June 30, 2014 and 2013 was:
 
Three months ended June 30,
 
Six months ended June 30,
 
2014
 
2013
 
2014
 
2013
High Performance Materials & Components
16.6
 %
 
13.7
%
 
15.4
 %
 
13.8
%
Flat Rolled Products
(3.3
)%
 
0.2
%
 
(4.1
)%
 
0.3
%
Our measure of segment operating profit, which we use to analyze the performance and results of our business segments, excludes income taxes, corporate expenses, net interest expense, retirement benefit expense, closed company expenses and restructuring costs, if any. Discontinued operations are also excluded. We believe segment operating profit, as defined, provides an appropriate measure of controllable operating results at the business segment level.
Second quarter 2014 results also included $4.0 million of Hot-Rolling and Processing Facility (HRPF) start-up costs, and $11.4 million of costs related to the Rowley titanium sponge facility Premium Quality (PQ) qualification process, including inventory valuation charges related to the market-based valuation of industrial titanium products, higher raw material costs due to the strategic decision to use ATI-produced titanium sponge rather than lower cost titanium units to manufacture certain titanium products, and higher production costs due to lower operating rates during the PQ qualification process.
The PQ qualification process at Rowley remains on schedule. We have melted all of the titanium sponge required as part of the PQ qualification process into mill products, which are now undergoing processing and quality testing. The Rowley facility is an important part of our long-term titanium products growth strategy. Until the completion of the PQ qualification process, we will continue to assess the optimal production rates at Rowley based on market demand for standard and industrial quality titanium products. We expect that this strategic approach regarding Rowley production and the relative cost differential to other titanium raw material sources to continue to adversely affect our operating results throughout 2014.
Segment operating profit for the second quarter 2014 in the High Performance Materials & Components segment was $85.1 million, or 16.6% of sales, compared to $69.0 million, or 13.7% of sales, for the second quarter 2013. The Flat Rolled Products segment operating loss for the second quarter 2014 was $19.9 million, or (3.3)% of sales, compared to segment operating profit of $1.2 million, or 0.2% of sales, for the first quarter 2013. Segment operating profit benefited from $41.3 million in cost reductions during the second quarter 2014.
The loss from continuing operations before tax for the second quarter 2014 was $3.4 million, or (0.3)% of sales, compared to income from continuing operations before tax of $6.5 million, or 0.6% of sales, for the second quarter 2013. Net loss from continuing operations attributable to ATI for the second quarter 2014 was $3.8 million, or $(0.03) per share, compared to net income from continuing operations attributable to ATI of $3.7 million, or $0.04 per share, for the second quarter 2013.
In the third quarter 2013, ATI announced the divestiture of its tungsten materials and iron castings businesses and the closure of its fabricated components business. These businesses are reported as discontinued operations for all periods presented. The tungsten materials business was sold in the fourth quarter 2013, and the iron castings business was held for sale as of the second quarter 2014. Assuming an agreement to sell this business is not reached, the orderly wind-down of the operations is expected to be completed by the end of the third quarter 2014. Results of discontinued operations for the second quarter 2014 were a net loss of $0.2 million compared to net income of $0.7 million for the second quarter 2013.
The net loss attributable to ATI was $4.0 million, or $(0.03) per share, for the second quarter 2014, compared to net income attributable to ATI of $4.4 million, or $0.04 per share for the second quarter 2013.
Segment operating profit in the High Performance Materials & Components segment for the first half 2014 was $154.2 million, or 15.4% of sales, compared to $144.0 million, or 13.8% or sales, for the first half 2013. Results for the Flat Rolled Products segment were a loss of $45.5 million, or (4.1)% of sales for the first half 2014, compared to segment operating profit of $3.7 million, or 0.3% or sales for the prior year period. The first half of 2014 results include $6.3 million of HRPF start-up costs and $26.2 million of Rowley titanium sponge PQ qualification costs.

29

Table of Contents

The loss from continuing operations before tax for the first half 2014 was $29.4 million, or (1.4)% of sales, compared to income from continuing operations before tax of $21.3 million, or 1.0% of sales, for the first half 2013. Net loss from continuing operations attributable to ATI for the first half 2014 was $21.9 million, or $(0.20) per share, compared to net income from continuing operations attributable to ATI of $13.4 million, or $0.13 per share, for the first half 2013. Results of discontinued operations for the six months ended June 30, 2014 were a net loss of $2.1 million compared to net income of $1.0 million for the prior year to date period. The net loss attributable to ATI was $24.0 million, or $(0.22) per share, for the first half 2014, compared to net income attributable to ATI of $14.4 million, or $0.13 per share for the first half 2013.
We continued to see improvement in end market demand as we moved through the second quarter 2014. Demand from the jet engine market is improving for both new builds and aftermarket spares. Sales to the oil & gas market in the second quarter 2014 were 30% higher than in the first quarter. The markets for flat-rolled stainless sheet and plate and grain-oriented electrical steel continue to improve and modest base price increases are being realized on non-contract business. In addition, demand from global projects in the industrial titanium market is beginning to shows signs of modest improvement after a lengthy period of stagnation.
As we look ahead to the third quarter 2014, we expect business conditions to continue to improve, resulting in improved operating results before taking into account start-up and qualification costs and net inventory valuation charges. While these improving conditions are encouraging, we expect third quarter 2014 results to continue to be negatively impacted by start-up and qualification costs associated with our two strategic growth projects, namely HRPF and Rowley. HRPF start-up costs in the third quarter are expected to increase to approximately $12 million, pre-tax, as we accelerate the commissioning process. This compares to HRPF start-up costs of $2.3 million and $4.0 million in the first quarter and second quarter 2014, respectively. We expect that the third quarter 2014 will be impacted by approximately $6 million of costs as we continue the Rowley titanium sponge PQ program. In addition, based on current year-end forecasted raw material costs, we expect LIFO inventory valuation reserve charges of approximately $19 million, pre-tax, in both the third and fourth quarter 2014, which will not have an offsetting benefit from net realizable value inventory valuation reserves. The net impact of LIFO inventory valuation reserve charges and net realizable value inventory valuation reserve benefits was zero and $2.9 million in the first and second quarters 2014, respectively.
Business Segment Results
The High Performance Materials & Components and Flat Rolled Products business segments represented the following percentages of our total revenues and segment operating profit for the first six months of 2014 and 2013:
 
2014
 
2013

Revenue
 
Operating
Profit (Loss)
 
Revenue
 
Operating
Profit
High Performance Materials & Components
47
%
 
142
 %
 
48
%
 
97
%
Flat Rolled Products
53
%
 
(42
)%
 
52
%
 
3
%
High Performance Materials & Components Segment
Second quarter 2014 sales increased 2.0% to $514.1 million compared to the second quarter 2013, primarily as a result of higher mill product shipments, which were partially offset by lower base-selling prices for most products, and lower raw material surcharges. Sales of nickel-based and specialty alloys were 13% higher than the second quarter 2013. Sales of titanium and titanium-related alloys were 3% lower than the second quarter 2013. Precision forgings, castings and components sales were 3% lower, while sales for zirconium and related alloys were 6% higher. Sales to the oil & gas market increased 33% compared to the prior year second quarter, marking the end of several quarters of supply chain rebalancing. Sales to the medical market increased 9%. Segment results for the second quarter 2014 continued to be impacted by inventory management actions in the aerospace supply chain, and by low demand for zirconium products from chemical processing industry markets. In addition, lower raw material indices and lower base-selling prices negatively affected sales. Demand from the jet engine market is improving for both new builds and aftermarket spares, and the aerospace supply chain appears to be in better balance.


30

Table of Contents

Comparative information for our High Performance Materials & Components segment revenues (in millions) by market and their respective percentages of the segment’s overall revenues for the three month periods ended June 30, 2014 and 2013 is as follows: 
 
Three Months Ended
 
Three Months Ended
Market
June 30, 2014
 
June 30, 2013
Aerospace:
 
 
 
 
 
 
 
Jet Engines
$
155.9

 
30
%
 
$
163.0

 
32
%
Airframes
96.1

 
19
%
 
90.0

 
18
%
Government
46.7

 
9
%
 
52.3

 
11
%
Total Aerospace
298.7

 
58
%
 
305.3

 
61
%
Medical
49.8

 
10
%
 
45.5

 
9
%
Oil & Gas/Chemical Process Industry
46.5

 
9
%
 
40.8

 
8
%
Electrical Energy
35.5

 
7
%
 
39.6

 
8
%
Defense
26.3

 
5
%
 
24.1

 
5
%
Construction/Mining
19.8

 
4
%
 
16.5

 
3
%
Transportation
12.2

 
2
%
 
12.0

 
2
%
Other
25.3

 
5
%
 
20.3

 
4
%
Total
$
514.1

 
100
%
 
$
504.1

 
100
%
International sales represented over 41% of total segment sales for the second quarter 2014. Comparative information for the High Performance Materials & Components segment’s major product categories, based on their percentages of sales for the three months ended June 30, 2014 and 2013, is as follows: 
 
Three Months Ended
June 30,
 
2014
 
2013
High-Value Products
 
 
 
Nickel-based alloys and specialty alloys
33
%
 
30
%
Precision forgings, castings and components
28
%
 
30
%
Titanium and titanium alloys
26
%
 
27
%
Zirconium and related alloys
13
%
 
13
%
Total High-Value Products
100
%
 
100
%
Segment operating profit in the second quarter 2014 increased to $85.1 million, or 16.6% of total sales, compared to $69.0 million, or 13.7% of total sales, for the second quarter 2013 primarily as a result of higher shipments and a $27.0 million benefit in the second quarter 2014 primarily associated with the reversal of our remaining LIFO-related net realizable value reserves recognized in the fourth quarter 2013, when the carrying value of our inventory as valued on the LIFO inventory accounting method exceeded replacement cost. Second quarter 2013 results included an $11.8 million LIFO benefit. Segment results continued to be negatively impacted by low operating rates at our Rowley, UT titanium sponge facility and by the strategic decision to use ATI-produced titanium sponge rather than lower cost titanium units to manufacture certain titanium products. Results benefited from $23.2 million in gross cost reductions in the second quarter 2014.
For the six months ended June 30, 2014, segment sales decreased 4.4%, to $998.5 million, compared to the first half 2013, primarily due to lower mill product shipments of titanium and titanium-related alloys and zirconium and related alloys, lower base-selling prices for most products, and lower raw material surcharges. Sales to the aerospace market were 7% lower than the prior year to date period.


31

Table of Contents

Comparative information for our High Performance Materials & Components segment revenues (in millions) by market and their respective percentages of the segment’s overall revenues for the six month periods ended June 30, 2014 and 2013 is as follows:
 
Six Months Ended
 
Six Months Ended
Market
June 30, 2014
 
June 30, 2013
Aerospace:
 
 
 
 
 
 
 
Jet Engines
$
310.7

 
31
%
 
$
334.9

 
32
%
Airframes
189.2

 
19
%
 
193.4

 
19
%
Government
89.6

 
9
%
 
104.7

 
10
%
Total Aerospace
589.5

 
59
%
 
633.0

 
61
%
Medical
91.9

 
9
%
 
94.8

 
9
%
Oil & Gas/Chemical Process Industry
90.6

 
9
%
 
87.4

 
8
%
Electrical Energy
63.6

 
6
%
 
78.0

 
7
%
Defense
52.7

 
5
%
 
47.5

 
5
%
Construction/Mining
37.0

 
4
%
 
31.6

 
3
%
Transportation
25.4

 
3
%
 
29.0

 
3
%
Other
47.8

 
5
%
 
42.9

 
4
%
Total
$
998.5

 
100
%
 
$
1,044.2

 
100
%
International sales represented over 41% of total segment sales for the first half 2014. Comparative information for the High Performance Materials & Components segment’s major product categories, based on their percentages of sales for the six months ended June 30, 2014 and 2013, is as follows:
 
Six Months Ended
June 30,
 
2014
 
2013
High-Value Products
 
 
 
Nickel-based alloys and specialty alloys
32
%
 
31
%
Precision forgings, castings and components
29
%
 
29
%
Titanium and titanium alloys
26
%
 
28
%
Zirconium and related alloys
13
%
 
12
%
Total High-Value Products
100
%
 
100
%
Segment operating profit for the first six months of 2014 increased to $154.2 million, or 15.4% of sales, compared to $144.0 million, or 13.8% of sales, for the comparable 2013 period. Results in 2014 include a $35.0 million benefit for the reversal of LIFO-related net realizable value reserves. Prior year results included an $11.8 million LIFO inventory valuation reserve benefit. Lower base selling prices and lower raw material surcharges also negatively impacted 2014 results. Cost reductions, before the effects of inflation, totaled $37.2 million for the first half of 2014.
Flat Rolled Products Segment
Second quarter 2014 sales increased 9% compared to the second quarter 2013, to $604.9 million, primarily due to higher shipments of both high-value and standard products. Shipments of high-value products increased 11% compared to the second quarter 2013, with shipments of our Precision Rolled Strip® and engineered strip products, and nickel-based alloys showing the largest increases. Shipments of standard stainless products increased 15%. Average selling prices declined 4% for high-value products and 1% for standard stainless products, as recent base price increases and increasing raw material surcharges have not reached the selling prices of the 2013 period. Second quarter 2014 Flat Rolled Products segment titanium shipments, including Uniti joint venture conversion, were 2.8 million pounds, an 8% decrease compared to the second quarter 2013.


32

Table of Contents

Comparative information for our Flat Rolled Products revenues (in millions) by market and their respective percentages of the segment’s overall revenues for the three month periods ended June 30, 2014 and 2013 is as follows:
 
Three Months Ended
 
Three Months Ended
Market
June 30, 2014
 
June 30, 2013
Oil & Gas/Chemical Process Industry
$
162.1

 
27
%
 
$
160.0

 
29
%
Automotive
106.1

 
17
%
 
87.9

 
16
%
Electrical Energy
83.5

 
14
%
 
82.2

 
15
%
Food Equipment & Appliances
73.9

 
12
%
 
63.4

 
12
%
Construction/Mining
53.4

 
9
%
 
53.3

 
10
%
Aerospace & Defense
42.4

 
7
%
 
34.4

 
6
%
Electronics/Computers/Communication
36.1

 
6
%
 
34.3

 
6
%
Transportation
35.0

 
6
%
 
23.2

 
4
%
Medical
6.8

 
1
%
 
7.0

 
1
%
Other
5.6

 
1
%
 
7.0

 
1
%
Total
$
604.9

 
100
%
 
$
552.7

 
100
%
International sales represented 35% of total segment sales for the second quarter 2014. Comparative information for the Flat Rolled Products segment’s major product categories, based on their percentages of sales for the three months ended June 30, 2014 and 2013, is as follows:

Three Months Ended
March 31,
 
2014

2013
High-Value Products
 
 
 
Precision and engineered strip
24
%
 
24
%
Nickel-based alloys and specialty alloys
21
%
 
22
%
Grain-oriented electrical steel
8
%
 
8
%
Titanium and titanium alloys
5
%
 
5
%
Total High-Value Products
58
%
 
59
%
Standard Products
 
 
 
Specialty stainless sheet
22
%
 
20
%
Stainless steel sheet
16
%
 
17
%
Stainless steel plate
4
%
 
4
%
Total Standard Products
42
%
 
41
%
Grand Total
100
%
 
100
%
Segment operating results for the second quarter 2014 were a loss of $19.9 million, or (3.3)% of sales, compared to segment operating profit of $1.2 million, or 0.2% of sales, for the second quarter 2013. The decrease in operating results was primarily due to higher inventory costs. Second quarter 2014 segment operating results included a $29.9 million LIFO inventory valuation reserve charge, compared to a $12.6 million LIFO inventory valuation reserve benefit in the prior year quarter. Additionally, 2014 results included a major portion of the costs related to the Rowley, UT titanium sponge facility PQ qualification process, including $4.8 million of charges for the market-based valuation of industrial titanium products, as well as higher raw material costs due to the strategic decision to use ATI-produced titanium sponge rather than other lower cost titanium units to manufacture certain titanium products.
Segment results also included $4.0 million of HRPF start-up costs. HRPF cold commissioning began in the first quarter 2014 and progressed to hot commissioning and the start of operational integration in the second quarter 2014. Hot commissioning of the HRPF is expected to be completed in the fourth quarter 2014. We expect HRPF pre-tax start-up costs of approximately $12 million in the third quarter 2014 as the pace of the hot commissioning process accelerates. We continue to expect $30-$35 million in start-up costs for the full year 2014. The HRPF is a critical part of our strategy to transform our flat rolled products business into a more competitive and consistently profitable business. It is designed to significantly expand our product offering capabilities, shorten manufacturing cycle times, reduce inventory requirements, and improve the cost structure of our flat rolled products business. We expect to begin to realize these benefits in 2015 upon the completion of the commissioning process.

33

Table of Contents

Results benefited from $18.1 million in gross costs reductions in the second quarter 2014.

Comparative shipment volume and average selling price information of the segment’s products for the three months ended June 30, 2014 and 2013 is provided in the following table:
 
Three Months Ended
June 30,
 
%
 
2014
 
2013
 
Change
Volume (000’s pounds):
 
 
 
 
 
High value
133,820

 
120,272

 
11
 %
Standard
193,699

 
168,946

 
15
 %
Total
327,519

 
289,218

 
13
 %
Average prices (per lb.):
 
 
 
 
 
High value
$
2.60

 
$
2.71

 
(4
)%
Standard
$
1.31

 
$
1.33

 
(1
)%
Combined Average
$
1.84

 
$
1.90

 
(3
)%

For the six months ended June 30, 2014, segment sales were $1,107.8 million, approximately equal to first half 2013 sales of $1,111.6 million. Shipments of high-value products in the first half 2014 were 10% higher, and shipments of standard products were 5% higher. Average transaction prices, which include surcharges, were lower for standard products and most high-value products.

Comparative information for our Flat Rolled Products revenues (in millions) by market and their respective percentages of the segment’s overall revenues for the six month periods ended June 30, 2014 and 2013 is as follows:
 
Six Months Ended

Six Months Ended
Market
June 30, 2014

June 30, 2013
Oil & Gas/Chemical Process Industry
$
279.8


25
%

$
304.8


27
%
Automotive
201.4


18
%

171.3


16
%
Electrical Energy
161.1


15
%

166.6


15
%
Food Equipment & Appliances
127.6


12
%

128.3


12
%
Construction/Mining
111.2


10
%

112.3


10
%
Aerospace & Defense
75.3


7
%

76.3


7
%
Electronics/Computers/Communication
67.3


6
%

70.2


6
%
Transportation
58.3


5
%

52.9


5
%
Medical
12.7


1
%

14.1


1
%
Other
13.1


1
%

14.8


1
%
Total
$
1,107.8


100
%

$
1,111.6


100
%

34

Table of Contents

International sales represented nearly 35% of total segment sales for the first six months of 2014. Comparative information for the Flat Rolled Products segment’s major product categories, based on their percentages of sales for the six months ended June 30, 2014 and 2013, is as follows:
 
Six Months Ended
June 30,
 
2014
 
2013
High-Value Products
 
 
 
Precision and engineered strip
25
%
 
24
%
Nickel-based alloys and specialty alloys
20
%
 
22
%
Grain-oriented electrical steel
8
%
 
7
%
Titanium and titanium alloys
5
%
 
5
%
Total High-Value Products
58
%
 
58
%
Standard Products
 
 
 
Specialty stainless sheet
20
%
 
20
%
Stainless steel sheet
17
%
 
18
%
Stainless steel plate
5
%
 
4
%
Total Standard Products
42
%
 
42
%
Grand Total
100
%
 
100
%
Segment operating results for the first half 2014 were a loss of $45.5 million, or (4.1)% of sales, compared to segment operating profit of $3.7 million, or 0.3% of sales, for the first half 2013. The decrease in operating results was primarily due to higher inventory costs. The first half of 2014 segment operating results included a $37.9 million LIFO inventory valuation reserve charge, compared to a $12.1 million LIFO inventory valuation reserve benefit in the prior year period. Primarily due to significant raw material inflation, particularly for nickel, based on current estimates, we expect to record another $38 million in LIFO inventory valuation reserve charges ratably over the remainder of 2014 in the Flat Rolled Products segment. Additionally, first half 2014 segment results include $6.3 million in HRPF start-up costs, and a major portion of the costs related to the Rowley, UT titanium sponge facility PQ qualification process, including $13.1 million of charges for the market-based valuation of industrial titanium products, as well as higher raw material costs due to the strategic decision to use ATI-produced titanium sponge rather than other lower cost titanium units to manufacture certain titanium products. Results benefited from $34.3 million in gross costs reductions in the first half 2014.

Comparative shipment volume and average selling price information of the segment’s products for the six months ended June 30, 2014 and 2013 is provided in the following table:
 
Six Months Ended
June 30,
 
%
 
2014
 
2013
 
Change
Volume (000’s pounds):
 
 
 
 
 
High value
256,589

 
233,295

 
10
 %
Standard
359,100

 
342,764

 
5
 %
Total
615,689

 
576,059

 
7
 %
Average prices (per lb.):
 
 
 
 
 
High value
$
2.49

 
$
2.75

 
(9
)%
Standard
$
1.28

 
$
1.35

 
(5
)%
Combined Average
$
1.79

 
$
1.92

 
(7
)%
Corporate Items
Corporate expenses for the second quarter 2014 were $11.7 million, compared to $11.8 million in the second quarter 2013. For the six months ended June 30, 2014, corporate expenses were $23.2 million, compared to $24.2 million for the six months ended June 30, 2013. The decrease in corporate expenses for the six month period ended June 30, 2014 was primarily the result of reduced performance-based incentive compensation expenses.

35

Table of Contents

Interest expense, net of interest income, in the second quarter 2014 was $28.5 million, compared to net interest expense of $13.9 million in the second quarter 2013. On a year-to-date basis, first half 2014 net interest expense was $57.6 million compared to $28.3 million for the first half of 2013. The increase in interest expense was primarily due to reduced capitalized interest on major strategic capital projects and higher debt levels. Interest expense benefited from the capitalization of interest costs on major strategic capital projects of $1.4 million in the second quarter 2014 compared to $10.6 million in the second quarter 2013. For the six months ended June 30, 2014 and 2013, capitalized interest was $3.6 million and $20.2 million, respectively. The capitalized interest amounts are primarily related to the HRPF.
Closed company and other expenses for the second quarter 2014 were $4.3 million, compared to $5.5 million for the second quarter 2013. For the six months ended June 30, 2014, other expenses were $9.3 million compared to $8.9 million for the comparable 2013 period. These items are presented primarily in selling and administrative expenses, and in other income in the consolidated statements of operations. The increase over the prior year for the six month period ended June 30, 2014 was primarily related to an increase in environmental expenses associated with closed operations.
Retirement benefit expense, which includes pension expense and other postretirement expense, decreased to $24.1 million in the second quarter 2014, compared to $32.5 million in the second quarter 2013. For the six months ended June 30, 2014, retirement benefit expense was $48.0 million, compared to $65.0 million for the six months ended June 30, 2013. Approximately 85% of 2014 retirement benefit expense is included in costs of sales, with the remainder included in selling and administrative expenses. The decrease in retirement benefit expense was primarily due to the utilization of a higher discount rate to value retirement benefit obligations.
Income Taxes
The second quarter 2014 benefit for income taxes was $2.9 million, or 85.3% of loss from continuing operations before income tax, compared to the second quarter 2013 provision for income taxes of $0.6 million, or 9.2% of income from continuing operations before income tax. Income taxes in the second quarter 2014 and 2013 included discrete tax benefits of $2.2 million and $2.6 million, respectively, primarily associated with adjustments to prior years’ taxes. For the first six months of 2014, the benefit for income taxes was $12.9 million, or 43.9% of loss from continuing operations before income tax, compared to a provision of $4.1 million, or 19.2% of income from continuing operations before income tax, for the comparable period. The first six months of 2014 included a discrete tax benefit of $4.4 million, primarily associated with adjustments to prior years’ and foreign taxes. Excluding the discrete tax benefits, the effective tax rate for the first half 2014 was 29.2%. The first six months of 2013 included a discrete tax benefit of $4.6 million, primarily associated with adjustments to prior years' taxes and 2013 Federal tax law changes.
Financial Condition and Liquidity
We believe that internally generated funds, current cash on hand and available borrowings under existing credit facilities will be adequate to meet foreseeable liquidity needs, including the completion and commissioning of the HRPF. If we needed to obtain additional financing using the credit markets, the cost and the terms and conditions of such borrowing may be influenced by our credit rating.
On June 2, 2014, the Company repaid the remaining $397.5 million outstanding of the 4.25% Convertible Senior Notes (Convertible Notes). Holders of the Convertible Notes had the option to convert their notes into shares of ATI common stock at any time prior to the close of business on the second scheduled trading day immediately preceding the June 1, 2014 maturity date. Prior to the maturity date, $5.0 million of the Convertible Notes were converted into 120,476 shares of ATI common stock. The conversion rate for the Convertible Notes was 23.9263 shares of ATI common stock per $1,000 principal amount of Convertible Notes, equivalent to a conversion price of approximately $41.795 per share. Other than receiving cash in lieu of fractional shares, holders did not have the option to receive cash instead of shares of common stock upon conversion.
There were no outstanding borrowings made under the Company’s $400 million senior unsecured domestic credit facility expiring May 31, 2018 during the first six months of 2014, although approximately $5 million has been utilized to support the issuance of letters of credit. This credit facility requires the Company to maintain a leverage ratio (consolidated total indebtedness net of cash on hand in excess of $50 million, divided by consolidated earnings before interest, taxes, depreciation and amortization, and non-cash pension expense for the four prior fiscal quarters) of not greater than 4.0, which is reduced to 3.75 for the quarter ended March 31, 2015 and is then further reduced to 3.50 beginning with the quarter ended June 30, 2015 and for each fiscal quarter thereafter. The credit facility also requires the Company to maintain an interest coverage ratio (consolidated earnings before interest, taxes, and non-cash pension expense divided by interest expense) of not less than 2.0 for the quarter ended March 31, 2014 and for each fiscal quarter thereafter. At June 30, 2014, the leverage ratio was 2.06 and the interest coverage ratio was 4.61. Changes in our credit rating do not impact our access to, or the cost of, our existing credit

36

Table of Contents

facilities.  While we remain in compliance with the financial covenants of our senior unsecured domestic credit facility, we have several options should we need to address any financial covenant concerns.
We have no off-balance sheet arrangements as defined in Item 303(a)(4) of SEC Regulation S-K.
Cash Flow and Working Capital
For the six months ended June 30, 2014, cash flow used in operations was $37.5 million, including a $127.6 million investment in managed working capital associated with increased business activity. Cash used in investing activities was $188.3 million in the first six months of 2014, and included $72.9 million for the acquisition of Dynamic Flowform Corp., $19.6 million for the acquisition of Hanard Machine, Inc., and $97.9 million of capital expenditures, primarily associated with the Flat Rolled Products segment’s HRPF. Cash used in financing activities was $445.9 million in the first six months of 2014 and consisted primarily of debt repayments of $403.4 million, including the June 2014 maturity of our convertible notes, and dividend payments of $38.6 million to ATI stockholders. At June 30, 2014, cash and cash equivalents on hand totaled $355.1 million, a decrease of $671.7 million from year end 2013. As of June 30, 2014, $213.5 million of cash and cash equivalents were held by our foreign subsidiaries.

As part of managing the liquidity of our business, we focus on controlling managed working capital, which is defined as gross accounts receivable and gross inventories, less accounts payable. In measuring performance in controlling managed working capital, we exclude the effects of LIFO and other inventory valuation reserves, and reserves for uncollectible accounts receivable which, due to their nature, are managed separately. At June 30, 2014, managed working capital decreased to 33.2% of annualized total ATI sales, including discontinued operations, compared to 39.4% of annualized sales at December 31, 2013. During the first six months of 2014, managed working capital increased by $127.6 million, to $1.6 billion. The increase in managed working capital from December 31, 2013 resulted from a $122.9 million increase in accounts receivable and an $87.3 million increase in inventory, partially offset by an $82.6 million increase in accounts payable. While accounts receivable balances increased during 2014, days sales outstanding, which measures actual collection timing for accounts receivable, improved compared to year end 2013. Gross inventory turns, which exclude the effect of LIFO inventory valuation reserves, remained unchanged at June 30, 2014 compared to year end 2013.
The components of managed working capital at June 30, 2014 and December 31, 2013 were as follows: 
 
June 30,
 
December 31,
(in millions)
2014
 
2013
Accounts receivable
$
650.9

 
$
528.2

Inventory
1,406.5

 
1,322.1

Accounts payable
(556.3
)
 
(471.8
)
Subtotal
1,501.1

 
1,378.5

Allowance for doubtful accounts
4.9

 
5.3

LIFO reserve
8.5

 
(29.4
)
Inventory reserves
51.4

 
84.3

Corporate and other
4.5

 
2.7

Managed working capital of discontinued operations
3.7

 
5.1

Managed working capital
$
1,574.1

 
1,446.5

Annualized prior 2 months sales
$
4,734.8

 
$
3,675.0

Managed working capital as a % of annualized sales
33.2
%
 
39.4
%
Change in managed working capital from December 31, 2013
$
127.6

 
 
Capital Expenditures
We have significantly expanded and continue to expand our manufacturing capabilities to meet expected intermediate and long-term demand from the aerospace (engine and airframe), oil & gas, chemical process industry, electrical energy, and medical markets, especially for titanium and titanium-based alloys, nickel-based alloys and superalloys, specialty alloys, and zirconium and related alloys.
Our most significant ongoing capital expenditure project is the HRPF at our existing Flat Rolled Products segment Brackenridge, PA operations. The HRPF is designed to provide unsurpassed manufacturing capability and versatility in the production of a wide range of flat-rolled specialty materials. We expect improved productivity, lower costs, and higher quality for our diversified product mix of flat-rolled specialty materials, including nickel-based and specialty alloys, titanium and

37

Table of Contents

titanium alloys, zirconium alloys, Precision Rolled Strip products, and stainless sheet and coiled plate products. The HRPF is also designed to produce high-strength carbon steel alloys. This capital project, which is on schedule and on budget at $1.2 billion excluding capitalized interest costs, is designed to be the most powerful mill in the world for production of specialty materials. After placement into service at the end of 2013, cold commissioning, which began in the first quarter 2014, progressed to hot commissioning and the start of operational integration in the second quarter 2014. Hot commissioning of the HRPF continues on schedule and is expected to be completed in the fourth quarter 2014. The HRPF is a critical part of our strategy to transform our flat rolled products business into a more competitive and profitable business. It is designed to significantly expand our product offering capabilities, shorten manufacturing cycle times, reduce inventory requirements, and improve the cost structure of our flat rolled products business. We expect to begin to realize these benefits in 2015 upon the completion of the commissioning process.
Capital expenditures were $97.9 million for the first six months of 2014, primarily related to the HRPF project. We currently expect our 2014 capital expenditures to be approximately $300 million. Our objective is to fund these capital expenditures with cash on hand and cash flow generated from our operations and if needed, by using a portion of our $400 million unsecured domestic credit facility.
Debt
At June 30, 2014, we had $1,538.1 million in total outstanding debt, compared to $1,947.3 million at December 31, 2013.
In managing our overall capital structure, some of the measures on which we focus are net debt to total capitalization, which is the percentage of our debt, net of cash that may be available to reduce borrowings, to our total invested and borrowed capital, and total debt to total capitalization, which excludes cash balances. Net debt as a percentage of total capitalization was 29.1% at June 30, 2014, compared to 24.1% at December 31, 2013. The net debt to total capitalization was determined as follows:
 
($ in millions)
June 30, 2014
 
December 31, 2013
Total debt
$
1,538.1

 
$
1,947.3

Less: Cash
(355.1
)
 
(1,026.8
)
Net debt
$
1,183.0

 
$
920.5

Total ATI stockholders' equity
2,875.7

 
2,894.2

Net ATI total capital
$
4,058.7

 
$
3,814.7

Net debt to ATI total capital
29.1
%
 
24.1
%
Total debt to total capitalization decreased to 34.8% at June 30, 2014 from 40.2% at December 31, 2013.
Total debt to total capitalization was determined as follows:
 
($ in millions)
June 30, 2014
 
December 31, 2013
Total debt
$
1,538.1

 
$
1,947.3

Total ATI stockholders' equity
2,875.7

 
2,894.2

Total ATI capital
$
4,413.8

 
$
4,841.5

Total debt to total ATI capital
34.8
%
 
40.2
%
There were no outstanding borrowings made under the Company’s $400 million senior unsecured domestic credit facility expiring May 31, 2018 during the first six months of 2014, although approximately $5 million has been utilized to support the issuance of letters of credit. This credit facility requires the Company to maintain a leverage ratio (consolidated total indebtedness net of cash on hand in excess of $50 million, divided by consolidated earnings before interest, taxes, depreciation and amortization, and non-cash pension expense for the four prior fiscal quarters) of not greater than 4.0, which is reduced to 3.75 for the quarter ended March 31, 2015 and is then further reduced to 3.50 beginning with the quarter ended June 30, 2015 and for each fiscal quarter thereafter. The credit facility also requires the Company to maintain an interest coverage ratio (consolidated earnings before interest, taxes, and non-cash pension expense divided by interest expense) of not less than 2.0 for the quarter ended March 31, 2014 and for each fiscal quarter thereafter. At June 30, 2014, the leverage ratio was 2.06 and the interest coverage ratio was 4.61. The Company was in compliance with these required ratios during all applicable periods.
We have an additional, separate credit facility for the issuance of letters of credit. As of June 30, 2014, $32 million in letters of credit were outstanding under this facility.

38

Table of Contents

In addition, STAL, the Company’s Chinese joint venture company in which ATI has a 60% interest, has a 205 million renminbi (approximately $33 million at June 30, 2014 exchange rates) revolving credit facility with a group of banks, which expires August 8, 2014. Negotiations are ongoing to replace this credit facility upon expiration. This credit facility is supported solely by STAL’s financial capability without any guarantees from the joint venture partners. As of June 30, 2014, there were no borrowings under this credit facility.
Dividends
A regular quarterly dividend of $0.18 per share of common stock was paid on June 18, 2014 to stockholders of record at the close of business on June 5, 2014. The payment of dividends and the amount of such dividends depends upon matters deemed relevant by our Board of Directors, such as our results of operations, financial condition, cash requirements, future prospects, any limitations imposed by law, credit agreements or senior securities, and other factors deemed relevant and appropriate.
Critical Accounting Policies
Inventory
At June 30, 2014, we had net inventory of $1,406.5 million. Inventories are stated at the lower of cost (last-in, first-out (LIFO), first-in, first-out (FIFO) and average cost methods) or market, less progress payments. Costs include direct material, direct labor and applicable manufacturing and engineering overhead, and other direct costs. Most of our inventory is valued utilizing the LIFO costing methodology. Inventory of our non-U.S. operations is valued using average cost or FIFO methods. Under the LIFO inventory valuation method, changes in the cost of raw materials and production activities are recognized in cost of sales in the current period even though these material and other costs may have been incurred at significantly different values due to the length of time of our production cycle. In a period of rising prices, cost of sales expense recognized under LIFO is generally higher than the cash costs incurred to acquire the inventory sold. Conversely, in a period of declining raw material prices, cost of sales recognized under LIFO is generally lower than cash costs incurred to acquire the inventory sold. Generally, over time based on overall inflationary trends in raw materials, labor and overhead costs, the use of the LIFO inventory valuation method will result in a LIFO inventory valuation reserve, as the higher current period costs are included in cost of sales and the balance sheet carrying value of inventory is reduced.
The prices for many of the raw materials we use have been extremely volatile during the past several years. Since we value most of our inventory utilizing the LIFO inventory costing methodology, a rise in raw material costs has a negative effect on our operating results by increasing cost of sales while lowering the carrying value of inventory, while, conversely, a fall in material costs results in a benefit to operating results by reducing cost of sales and increasing the inventory carrying value. For example, in 2013 and 2012, the effect of falling raw material costs on our LIFO inventory valuation method resulted in cost of sales from continuing operations which were $80.9 million and $75.6 million, respectively, lower than would have been recognized had we utilized the FIFO methodology to value our inventory. However, in cases where inventory at FIFO cost is lower than the LIFO carrying value, a write-down of the inventory to market may be required, subject to a lower of cost or market evaluation.
Since the LIFO inventory valuation methodology is designed for annual determination, interim estimates of the annual LIFO valuation are required. We recognize the effects of the LIFO inventory valuation method on an interim basis by projecting the expected annual LIFO cost and allocating that projection to the interim quarters equally. These projections of annual LIFO inventory valuation reserve changes are updated quarterly and are evaluated based upon material, labor and overhead costs and projections for such costs at the end of the year plus projections regarding year end inventory levels.
In applying the lower of cost or market principle, market means current replacement cost, subject to a ceiling (market value shall not exceed net realizable value) and a floor (market shall not be less than net realizable value reduced by an allowance for a normal profit margin). We evaluate product lines on a quarterly basis to identify inventory values that exceed estimated net realizable value. The calculation of a resulting reserve, if any, is recognized as an expense in the period that the need for the reserve is identified. We recorded a $37.9 million increase to our cost of sales for changes in our LIFO inventory valuation method in the first six months of 2014 which was offset by a $35.0 million reduction in net realizable value reserves on the carrying value of LIFO-based inventory. The first six months of 2014 results also included $13.1 million in inventory valuation charges related to the market-based valuation of industrial titanium products in the Flat Rolled Products segment.
It is our general policy to write-down to scrap value any inventory that is identified as obsolete and any inventory that has aged or has not moved in more than twelve months. In some instances this criterion is up to twenty-four months due to the longer manufacturing and distribution process for such products.
The LIFO inventory valuation methodology is not utilized by many of the companies with which we compete, including foreign competitors. As such, our results of operations may not be comparable to those of our competitors during periods of

39

Table of Contents

volatile material costs due, in part, to the differences between the LIFO inventory valuation method and other acceptable inventory valuation methods.
Other Critical Accounting Policies
A summary of other significant accounting policies is discussed in Management’s Discussion and Analysis of Financial Condition and Results of Operations and in Note 1 to the consolidated financial statements contained in our Annual Report on Form 10-K for the year ended December 31, 2013.
The preparation of the financial statements in accordance with U.S. generally accepted accounting principles requires us to make judgments, estimates and assumptions regarding uncertainties that affect the reported amounts of assets and liabilities. Significant areas of uncertainty that require judgments, estimates and assumptions include the accounting for derivatives, retirement plans, income taxes, environmental and other contingencies as well as asset impairment, inventory valuation and collectability of accounts receivable. We use historical and other information that we consider to be relevant to make these judgments and estimates. However, actual results may differ from those estimates and assumptions that are used to prepare our financial statements.

New Accounting Pronouncements Adopted
In January 2014, the Company adopted changes issued by the Financial Accounting Standards Board (FASB) that require an entity to net its liability for unrecognized tax positions against a net operating loss carryforward, a similar tax loss or a tax credit carryforward when settlement in this manner is available under the tax law. The adoption of these changes had no impact on the consolidated financial statements.
In January 2014, the Company adopted changes issued by the FASB to the accounting for obligations resulting from joint and several liability arrangements. This guidance requires an entity that is joint and severally liable to measure the obligation as the sum of the amount the entity has agreed with co-obligors to pay and any additional amount it expects to pay on behalf of one or more co-obligors. Required disclosures include a description of the nature of the arrangement, how the liability arose, the relationship with co-obligors and the terms and conditions of the arrangement. The adoption of these changes had no impact on the consolidated financial statements.
In January 2014, the Company adopted changes issued by the FASB to a parent entity’s accounting for the cumulative translation adjustment (CTA) upon derecognition of certain subsidiaries or groups of assets within a foreign entity or of an investment in a foreign entity. The amendments specify that CTA should be released into earnings when an entity ceases to have a controlling financial interest in a subsidiary or group of assets within a consolidated foreign entity and the sale or transfer results in the complete or substantially complete liquidation of the foreign entity. For sales of an equity method investment that is a foreign entity, a pro rata portion of CTA attributable to the investment would be recognized in earnings when the investment is sold. When an entity sells either a part or all of its investment in a consolidated foreign entity, CTA would be recognized in earnings only if the sale results in the parent no longer having a controlling financial interest in the foreign entity. In addition, CTA should be recognized in earnings in a business combination achieved in stages (i.e., a step acquisition). The adoption of these changes had no impact on the consolidated financial statements.
Pending Accounting Pronouncements

In May 2014, the FASB issued changes to revenue recognition with customers. This update provides a five-step analysis of transactions to determine when and how revenue is recognized. An entity should recognize revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. This update will be effective for the Company beginning in fiscal year 2017. This update may be applied retrospectively to each prior reporting period presented or retrospectively with the cumulative effect of initially applying this update recognized at the date of initial application. The Company is currently evaluating the impact of the new guidance on its consolidated financial statements.
In April 2014, the FASB issued changes to the criteria for reporting discontinued operations. Under the new criteria, a disposal of a component of an entity is required to be reported as discontinued operations only if the disposal represents a strategic shift that has, or will have, a major effect on an entity’s operations and financial results. The current criteria that there be no significant continuing involvement in the operations of the component after the disposal transaction has been removed under the new guidance. The new guidance also requires the presentation of the assets and liabilities of a disposal group that includes a discontinued operation for each comparative period and requires additional disclosures about discontinued operations, including the major line items constituting the pretax profit or loss of the discontinued operation, certain cash flow information for the discontinued operation, expanded disclosures about an entity’s significant continuing involvement in a discontinued

40

Table of Contents

operation, and disclosures about a disposal of an individually significant component of an entity that does not qualify for discontinued operations presentation. The provisions of the new guidance become effective for all disposals that occur for the Company beginning in fiscal year 2015. The Company does not anticipate a material impact to the consolidated financial statements upon adoption.
Forward-Looking and Other Statements
From time to time, we have made and may continue to make “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. Certain statements in this report relate to future events and expectations and, as such, constitute forward-looking statements. Forward-looking statements include those containing such words as “anticipates,” “believes,” “estimates,” “expects,” “would,” “should,” “will,” “will likely result,” “forecast,” “outlook,” “projects,” and similar expressions. Forward-looking statements are based on management’s current expectations and include known and unknown risks, uncertainties and other factors, many of which we are unable to predict or control, that may cause our actual results, performance or achievements to differ materially from those expressed or implied in the forward-looking statements. Important factors that could cause actual results to differ materially from those in the forward-looking statements include: (a) material adverse changes in economic or industry conditions generally, including global supply and demand conditions and prices for our specialty materials; (b) material adverse changes in the markets we serve, including the aerospace and defense, oil and gas/chemical process industry, electrical energy, medical, automotive, construction and mining, and other markets; (c) our inability to achieve the level of cost savings, productivity improvements, synergies, growth or other benefits anticipated by management, from strategic investments and the integration of acquired businesses, whether due to significant increases in energy, raw materials or employee benefits costs, the possibility of project cost overruns or unanticipated costs and expenses, or other factors; (d) volatility of prices and availability of supply of the raw materials that are critical to the manufacture of our products; (e) declines in the value of our defined benefit pension plan assets or unfavorable changes in laws or regulations that govern pension plan funding; (f) significant legal proceedings or investigations adverse to us; and (g) other risk factors summarized in our Annual Report on Form 10-K for the year ended December 31, 2013, and in other reports filed with the Securities and Exchange Commission. We assume no duty to update our forward-looking statements.
Item 3.
Quantitative and Qualitative Disclosures About Market Risk
As part of our risk management strategy, we utilize derivative financial instruments, from time to time, to hedge our exposure to changes in energy and raw material prices, foreign currencies, and interest rates. We monitor the third-party financial institutions which are our counterparty to these financial instruments on a daily basis and diversify our transactions among counterparties to minimize exposure to any one of these entities. Fair values for derivatives were measured using exchange-traded prices for the hedged items including consideration of counterparty risk and the Company’s credit risk. Our exposure to volatility in interest rates is presently not material, as nearly all of our debt is at fixed interest rates.
Volatility of Energy Prices. Energy resources markets are subject to conditions that create uncertainty in the prices and availability of energy resources. The prices for and availability of electricity, natural gas, oil and other energy resources are subject to volatile market conditions. These market conditions often are affected by political and economic factors beyond our control. Increases in energy costs, or changes in costs relative to energy costs paid by competitors, have and may continue to adversely affect our profitability. To the extent that these uncertainties cause suppliers and customers to be more cost sensitive, increased energy prices may have an adverse effect on our results of operations and financial condition. We use approximately 11 to 13 million MMBtu’s of natural gas annually, depending upon business conditions, in the manufacture of our products. These purchases of natural gas expose us to risk of higher natural gas prices. For example, a hypothetical $1.00 per MMBtu increase in the price of natural gas would result in increased annual energy costs of approximately $11 to $13 million. We use several approaches to minimize any material adverse effect on our results of operations or financial condition from volatile energy prices. These approaches include incorporating an energy surcharge on many of our products and using financial derivatives to reduce exposure to energy price volatility.
At June 30, 2014, the outstanding financial derivatives used to hedge our exposure to energy cost volatility included both natural gas and electricity hedges. For natural gas, approximately 70% of our forecasted domestic requirements are hedged for 2014, approximately 80% for 2015, approximately 50% for 2016, and approximately 15% for 2017. The net mark-to-market valuation of these outstanding natural gas hedges at June 30, 2014 was an unrealized pre-tax gain of $1.3 million, comprised of $2.4 million classified in prepaid expenses and other current assets, $0.6 million included in other long-term assets, $0.5 million in accrued liabilities, and $1.2 million in other long-term liabilities. For the three months ended June 30, 2014, the effects of natural gas hedging activity decreased cost of sales by $1.6 million. For electricity usage in our Western Pennsylvania operations, we have hedged approximately 10% of our on-peak and off-peak forecasted requirements for 2014. The net mark-to-market valuation of the electricity hedges remained unchanged as $0.1 million classified in prepaid expenses and other

41

Table of Contents

current assets was offset by $0.1 million in accrued liabilities on the balance sheet. For the three months ended June 30, 2014, the effects of electricity hedging activity decreased cost of sales by $0.1 million.
Volatility of Raw Material Prices. We use raw materials surcharge and index mechanisms to offset the impact of increased raw material costs; however, competitive factors in the marketplace can limit our ability to institute such mechanisms, and there can be a delay between the increase in the price of raw materials and the realization of the benefit of such mechanisms. For example, in 2013, we used approximately 100 million pounds of nickel; therefore, a hypothetical change of $1.00 per pound in nickel prices would result in increased costs of approximately $100 million. In addition, in 2013, we also used approximately 760 million pounds of ferrous scrap in the production of our flat-rolled products; a hypothetical change of $0.01 per pound would result in increased costs of approximately $8 million. While we enter into raw materials futures contracts from time-to-time to hedge exposure to price fluctuations, such as for nickel, we cannot be certain that our hedge position adequately reduces exposure. We believe that we have adequate controls to monitor these contracts, but we may not be able to accurately assess exposure to price volatility in the markets for critical raw materials.

The majority of our products are sold utilizing raw material surcharges and index mechanisms. However, as of June 30, 2014, we had entered into financial hedging arrangements primarily at the request of our customers related to firm orders for an aggregate amount of approximately 10% of our estimated annual nickel requirements. These nickel hedges extend to 2020. Any gain or loss associated with these hedging arrangements is included in cost of sales. At June 30, 2014, the net mark-to-market valuation of our outstanding raw material hedges was an unrealized pre-tax gain of $12.4 million, comprised of $7.1 million classified in prepaid expenses and other current assets, $5.4 million in other long-term assets, and $0.1 million in accrued liabilities on the balance sheet.
Foreign Currency Risk. Foreign currency exchange contracts are used, from time-to-time, to limit transactional exposure to changes in currency exchange rates. We sometimes purchase foreign currency forward contracts that permit us to sell specified amounts of foreign currencies expected to be received from our export sales for pre-established U.S. dollar amounts at specified dates. The forward contracts are denominated in the same foreign currencies in which export sales are denominated. These contracts are designated as hedges of the variability in cash flows of a portion of the forecasted future export sales transactions which otherwise would expose the Company to foreign currency risk. We may also enter into foreign currency forward contracts that are not designated as hedges, which are denominated in the same foreign currency in which export sales are denominated. At June 30, 2014, the outstanding financial derivatives, including both hedges and undesignated derivatives, that are used to manage our exposure to foreign currency, primarily euros, represented approximately 10% of our forecasted total international sales through 2018. In addition, we may also designate cash balances held in foreign currencies as hedges of forecasted foreign currency transactions. At June 30, 2014, the net mark-to-market valuation of the outstanding foreign currency forward contracts was a net liability of $5.6 million, of which $0.5 million is included in prepaid expenses and other current assets, $4.4 million in accrued liabilities and $1.7 million in other long-term liabilities on the balance sheet.
Item 4.
Controls and Procedures
(a) Evaluation of Disclosure Controls and Procedures
Our Chief Executive Officer and Chief Financial Officer have evaluated the Company’s disclosure controls and procedures (as defined in Rule 13a-15(e) or Rule 15d-15(e) under the Securities Exchange Act of 1934, as amended) as of June 30, 2014, and they concluded that these disclosure controls and procedures are effective.
(b) Changes in Internal Controls
There was no change in our internal controls over financial reporting identified in connection with the evaluation of the Company’s disclosure controls and procedures (as defined in Rule 13a-15(e) or Rule 15d-15(e) under the Securities Exchange Act of 1934, as amended) as of June 30, 2014 conducted by our Chief Executive Officer and Chief Financial Officer, that occurred during the quarter ended June 30, 2014 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.
PART II. OTHER INFORMATION
Item 1.
Legal Proceedings
A number of lawsuits, claims and proceedings have been or may be asserted against the Company relating to the conduct of its currently or formerly owned businesses, including those pertaining to product liability, patent infringement, commercial, government contracting, construction, employment, employee and retiree benefits, taxes, environmental, health and safety and

42

Table of Contents

occupational disease, and stockholder and corporate governance matters. Certain of such lawsuits, claims and proceedings are described in our Annual Report on Form 10-K for the year ended December 31, 2013, and addressed in Note 16 to the unaudited interim financial statements included herein. While the outcome of litigation cannot be predicted with certainty, and some of these lawsuits, claims or proceedings may be determined adversely to the Company, management does not believe that the disposition of any such pending matters is likely to have a material adverse effect on the Company’s financial condition or liquidity, although the resolution in any reporting period of one or more of these matters could have a material adverse effect on the Company’s results of operations for that period.
Item 1A.
Risk Factors
The following is an update to, and should be read in conjunction with, Item 1A. Risk Factors contained in the Company’s Annual Report on Form 10-K for the year ended December 31, 2013. In addition to the other information set forth in this report, you should carefully consider the factors discussed in Part I, “Item 1A. Risk Factors” in our Annual Report on Form 10-K for the year ended December 31, 2013, which could materially affect our business, financial condition or future results. The risks described in our Annual Report on Form 10-K are not the only risks facing our Company. Additional risks and uncertainties not currently known to us or that we currently deem to be immaterial also may materially adversely affect our business, financial condition and/or operating results.
Labor Matters. We have approximately 9,600 full-time employees. Approximately 50% of our workforce is covered by various collective bargaining agreements, predominantly with the United Steel, Paper and Forestry, Rubber, Manufacturing, Energy, Allied Industrial and Service Workers International Union (USW). At various times, our collective bargaining agreements with unions expire and are subject to renegotiation. Our collective bargaining agreements with the USW that cover approximately 2,200 Flat Rolled Products segment production, office and maintenance employees and approximately 200 employees in a High Performance Materials & Components segment Albany, Oregon facility will expire on June 30, 2015. Generally, collective bargaining agreements that expire may be terminated after notice by the union. After termination, the union may authorize a strike. A labor dispute, which could lead to a strike, lockout, or other work stoppage by the employees covered by one or more of the collective bargaining agreements, could have a material adverse effect on production at one or more of our facilities and, depending upon the length of such dispute or work stoppage, on our operating results. There can be no assurance that we will succeed in concluding collective bargaining agreements to replace those that expire.
Cyber Security Threats. Increased global information technology threats, security requirements, vulnerabilities, and a rise in sophisticated and targeted international computer crime pose a risk to the security of our systems and networks and the confidentiality, availability and integrity of our data. We believe that ATI faces the threat of such cyber attacks due to the markets we serve, the products we manufacture, the locations of our operations, and global interest in our technology. Due to the evolving nature of cyber security threats, the scope and impact of any incident cannot be predicted. We continually work to safeguard our systems and mitigate potential risks. Despite our efforts to protect sensitive information and confidential and personal data, our facilities and systems and those of our third-party service providers may be vulnerable to security breaches. This could lead to disclosure, modification or destruction of proprietary and other key information, defective products, production downtimes, operational disruptions, and remediation costs, which in turn could adversely affect our reputation, competitiveness and results of operations.

43

Table of Contents

Item 6.
Exhibits
(a) Exhibits
12.1
 
Computation of the Ratio of Earnings to Fixed Charges (filed herewith).
 
 
 
31.1
 
Certification of Chief Executive Officer required by Securities and Exchange Commission Rule 13a – 14(a) or 15d – 14(a) (filed herewith).
 
 
 
31.2
 
Certification of Chief Financial Officer required by Securities and Exchange Commission Rule 13a – 14(a) or 15d – 14(a) (filed herewith).
 
 
 
32.1
 
Certification pursuant to 18 U.S.C. Section 1350 (filed herewith).
 
 
 
101.INS
 
XBRL Instance Document
 
 
 
101.SCH
 
XBRL Taxonomy Extension Schema Document
 
 
 
101.CAL
 
XBRL Taxonomy Extension Calculation Linkbase Document
 
 
 
101.DEF
 
XBRL Taxonomy Extension Definition Linkbase Document
 
 
 
101.LAB
 
XBRL Taxonomy Extension Label Linkbase Document
 
 
 
101.PRE
 
XBRL Taxonomy Extension Presentation Linkbase Document


44

Table of Contents

SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
ALLEGHENY TECHNOLOGIES INCORPORATED
(Registrant)
 
Date:
August 4, 2014
 
By
 
/s/ Patrick J. DeCourcy
 
 
 
 
 
Patrick J. DeCourcy
 
 
 
 
 
Senior Vice President, Finance and Chief Financial Officer
(Principal Financial Officer)
 
 
 
 
 
 
Date:
August 4, 2014
 
By
 
/s/ Karl D. Schwartz
 
 
 
 
 
Karl D. Schwartz
 
 
 
 
 
Controller and Chief Accounting Officer
(Principal Accounting Officer)

45

Table of Contents

EXHIBIT INDEX
 
12.1
 
Computation of the Ratio of Earnings to Fixed Charges (filed herewith).
 
 
 
31.1
 
Certification of Chief Executive Officer required by Securities and Exchange Commission Rule 13a – 14(a) or 15d – 14(a).
 
 
 
31.2
 
Certification of Chief Financial Officer required by Securities and Exchange Commission Rule 13a – 14(a) or 15d – 14(a).
 
 
 
32.1
 
Certification pursuant to 18 U.S.C. Section 1350.
 
 
 
101.INS
 
XBRL Instance Document
 
 
 
101.SCH
 
XBRL Taxonomy Extension Schema Document
 
 
 
101.CAL
 
XBRL Taxonomy Extension Calculation Linkbase Document
 
 
 
101.DEF
 
XBRL Taxonomy Extension Definition Linkbase Document
 
 
 
101.LAB
 
XBRL Taxonomy Extension Label Linkbase Document
 
 
 
101.PRE
 
XBRL Taxonomy Extension Presentation Linkbase Document



46