10-K


UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D. C. 20549
FORM 10-K
ý
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended June 30, 2015
OR
¨
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from                          to                         
Commission File No. 1-4982
PARKER-HANNIFIN CORPORATION
(Exact name of registrant as specified in its charter)
Ohio
34-0451060
(State or other jurisdiction of
Incorporation or Organization)
(I.R.S. Employer
Identification No.)
 
 
6035 Parkland Boulevard, Cleveland, Ohio
44124-4141
(Address of Principal Executive Offices)
(Zip Code)
Registrant’s telephone number, including area code (216) 896-3000
Securities registered pursuant to Section 12(b) of the Act:
Title of Each Class
 
Name of Each Exchange
on which Registered
Common Shares, $.50 par value
 
New York Stock Exchange
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    
Yes  ý    No  ¨
Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨    No  ý
Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ý    No  ¨
Indicate by check mark whether the Registrant has submitted electronically and posted on its corporate website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit and post such files).    Yes  ý    No  ¨
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K ¨.
Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of "large accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act.
Large Accelerated Filer:
ý
Accelerated Filer:
¨
Non-Accelerated Filer:
¨
Smaller Reporting Company:
¨
(Do not check if a smaller reporting company)
 
 
 
Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  ý
The aggregate market value of the outstanding common stock held by non-affiliates of the Registrant as of December 31, 2014, excluding, for purpose of this computation only, stock holdings of the Registrant’s Directors and Officers: $18,161,893,495.
The number of Common Shares outstanding on July 31, 2015 was 138,418,792.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the following documents are incorporated by reference:
(1)
Annual Report to Shareholders of the Company for the fiscal year ended June 30, 2015 is incorporated by reference into Parts I and II hereof.
(2)
Definitive Proxy Statement for the Company’s 2015 Annual Meeting of Shareholders to be held on October 28, 2015 is incorporated by reference into Part III hereof.




PARKER-HANNIFIN CORPORATION
FORM 10-K
Fiscal Year Ended June 30, 2015
PART I

ITEM 1. Business. Parker-Hannifin Corporation is a leading worldwide diversified manufacturer of motion and control technologies and systems, providing precision engineered solutions for a wide variety of mobile, industrial and aerospace markets. The Company was incorporated in Ohio in 1938. Its principal executive offices are located at 6035 Parkland Boulevard, Cleveland, Ohio 44124-4141, telephone (216) 896-3000. As used in this Annual Report on Form 10-K, unless the context otherwise requires, the term "Company" refers to Parker-Hannifin Corporation and its subsidiaries.
The Company’s investor relations internet website address is www.phstock.com. The Company makes available free of charge on or through its website its annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and any amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as soon as reasonably practicable after filing or furnishing such material electronically with the Securities and Exchange Commission. The information contained on or accessible through the Company’s website is not part of this Annual Report on Form 10-K.
The Board of Directors has adopted a written charter for each of the committees of the Board of Directors. These charters, as well as the Company’s Global Code of Business Conduct, Board of Directors Guidelines on Significant Corporate Governance Issues and Independence Standards for Directors, are posted and available on the Company’s investor relations internet website at www.phstock.com under the Corporate Governance page. Shareholders may request copies of these corporate governance documents, free of charge, by writing to Parker-Hannifin Corporation, 6035 Parkland Boulevard, Cleveland, Ohio 44124-4141, Attention: Secretary, or by calling (216) 896-3000.
The Company’s manufacturing, service, sales, distribution and administrative facilities are located in 40 states within the United States and in 49 other countries. The Company’s products are sold as original and replacement equipment through sales and distribution centers worldwide. The Company markets its products through direct-sales employees, independent distributors and sales representatives. The Company's products are supplied to approximately 445,000 customers in virtually every significant manufacturing, transportation and processing industry.

The Company has two reporting segments: Diversified Industrial and Aerospace Systems. During the fiscal year ended June 30, 2015, the Company's technologies and systems were used in the products of these two reporting segments. For fiscal year 2015, total net sales were $12.7 billion. Diversified Industrial Segment products accounted for 82% and Aerospace Systems Segment products accounted for 18% of those net sales.
Markets
The Company’s technologies and systems are used throughout various industries and in various applications. The approximately 445,000 customers who purchase the Company’s products are found throughout virtually every significant manufacturing, transportation and processing industry. No single customer accounted for more than 4% of the Company’s total net sales for the fiscal year ended June 30, 2015.

- 1 -



Diversified Industrial Segment. Sales of Diversified Industrial Segment products are made primarily to original equipment manufacturers ("OEMs") and their replacement markets in manufacturing, packaging, processing, transportation, mobile construction, refrigeration and air conditioning, agricultural and military machinery and equipment industries. The major markets for products of the Diversified Industrial Segment are listed below by group:
 
Automation
Group:
•    Automotive
•    Conveyor and material handling
 •    Factory automation
•    Food and beverage 
•    Industrial machinery
  •    Life sciences and medical
•    Machine tools 
•    Oil and gas
•    Packaging, paper and plastics machinery
•    Primary metals
•    Renewable energy
 •    Safety and security
 •    Semiconductor and electronics
 •    Transportation and mobile


 
 
 
Engineered Materials Group:
•    Aerospace
 
•    Chemical processing
 
•    Consumer
 
•    Fluid power
 
•    General industrial
 
•    Information technology
 
•    Life sciences
•    Microelectronics
 
•    Military
 
•    Oil and gas
•    Power generation
•    Renewable energy
 
•    Telecommunications
 
•    Transportation
 
 
 
Filtration
Group:
•    Aerospace
•    Food and beverage
 
•    Industrial machinery
 
•    Life sciences
 
•    Marine
 
•    Mobile equipment
•    Oil and gas
 •    Power generation
 •    Renewable energy
 •    Transportation
 •    Water purification
 
 
 
Fluid
Connectors
Group:
•    Aerial lift
 
•    Agriculture
 
•    Bulk chemical handling
 
•    Construction machinery
 
•    Food and beverage
 
•    Fuel and gas delivery
 
•    Industrial machinery
•    Life sciences
 
•    Marine
 
•    Mining
 
•    Mobile equipment
 
•    Oil and gas
 
•    Renewable energy
 
•    Transportation
 
 
 
Hydraulics
Group:
•    Aerial lift
 
•    Agriculture
 
•    Automotive manufacturing
 
•    Construction machinery
 
•    Forestry
 
•    Industrial machinery
•    Machine tool
•    Marine

•    Material handling
•    Mining
 
•    Oil and gas
 
•    Power generation
 
•    Refuse vehicles
 
•    Renewable energy
 
•    Truck hydraulics
•    Turf equipment
 
 
 

- 2 -



Instrumentation
Group:
•    Air conditioning
•    Alternative fuels
•    Bio pharmaceuticals
•    Chemical and refining
 
•    Food and beverage
 
•    Life sciences
•    Microelectronics
•    Mining
•    Oil and gas
 
•    Pharmaceuticals
 
•    Power generation
•    Precision cooling
•    Refrigeration
•    Water/wastewater

Aerospace Systems Segment. Sales of the Aerospace Systems Segment products are made primarily in the commercial and military aerospace markets to both OEMs and to end users for spares, maintenance, repair and overhaul. The major markets for products of the Aerospace Systems Segment are listed below:

•    Commercial transports
 
•    Engines
 
•    General and business aviation
 
•    Helicopters
 
•    Launch vehicles
 
•    Military aircraft
•    Missiles
 
•    Power generation
 
•    Regional transports
 
•    Unmanned aerial vehicles
 
•    Aftermarket services


Principal Products and Methods of Distribution
Although the Company offers hundreds of thousands of individual products, no single product contributed more than 1% to the Company’s total net sales for the fiscal year ended June 30, 2015. Listed below are some of the Company’s principal products.
Diversified Industrial Segment. The products produced by the Company’s Diversified Industrial Segment consist of a broad range of motion-control and fluid systems and components, which are described below by group:
Automation Group: pneumatic, fluidic and electromechanical components and systems, including:
•    Air preparation units
•    Manifolds
•    Pneumatic actuators and grippers 
•    Pneumatic valves and controls  
•    Vacuum generators, cups and sensors
•    Fluidic valves and pumps


•    AC/DC drives and systems
 
•    Electric actuators, gantry robots and slides
 
•    Human-machine interfaces
 
•    Inverters 
•    Rotary actuators
•    Solenoid valves
 
•    Stepper motors, servo motors, drives and controls
•    Structural extrusions

Engineered Materials Group: static and dynamic sealing devices, including:
•    Dynamic seals
 
•    Elastomeric o-rings
•    Electro-medical instrument design and assembly
 
•    Electromagnetic interference shielding
 
•    Extruded and precision-cut fabricated elastomeric seals
 
 •    High-temperature metal seals
•    Homogeneous and inserted elastomeric shapes
 
•    Medical devices
 
•    Metal and plastic retained composite seals
 
•    Shielded optical windows
 
•    Silicone tubing and extrusions
•    Thermal management products
•    Vibration dampening


- 3 -



Filtration Group: filters, systems and diagnostics solutions to monitor and remove contaminants from fuel, air, oil, water and other liquids and gases, including:
•    Analytical gas generators
 
•    Compressed air and gas filters and dryers
 
•    Engine air, coolant, fuel and oil filtration systems
•    Filtration and purification systems
 
•    Fluid condition monitoring systems
•    Hydraulic and lubrication filters

 

•    Instrumentation filters
•    Membrane and fiber filters
•    Nitrogen and hydrogen generators 
•    Sterile air filtration
•    Water desalinization and purification filters/systems

Fluid Connectors Group: connectors which control, transmit and contain fluid, including:
•    Check valves
 
•    Connectors for low pressure fluid conveyance
 
•    Diagnostic equipment
 
•    Hose couplings
 
•    Industrial hose
•    Polytetrafluoroethylene ("PTFE") hose and tubing
 
•    Quick couplings
 
•    Rubber and thermoplastic hose
 
•    Tube fittings and adapters
 
•    Tubing and plastic fittings


Hydraulics Group: hydraulic components and systems for builders and users of industrial and mobile machinery and equipment, including:
•    Accumulators
 
•    Cartridge valves
•    Coolers
•    Electrohydraulic actuators
•    Electronic displays
•    Electronic I/O controllers
 
•    Fan drives
 
•    Hybrid drives
 
•    Hydraulic cylinders
 
•    Hydraulic motors and pumps
•    Hydraulic systems
•    Hydraulic valves and controls 
•    Hydrostatic steering units
 
•    Integrated hydraulic circuits
 
•    Power take-off equipment
 
•    Power units
 
•    Rotary actuators
 
•    Sensors
•    Telematic controllers

Instrumentation Group: high quality critical flow components for process instrumentation, healthcare and ultra-high-purity applications and components for use in refrigeration and air conditioning systems and in fluid control applications for processing, fuel dispensing, beverage dispensing and mobile emissions, including: 
•    Accumulators
•    Analytical instruments and sample conditioning systems
•    Carbon dioxide controls
•    Compressed natural gas dispensers
•    Electronic controllers
•    Filter driers
•    Fluoropolymer chemical delivery fittings, valves and pumps
•    Hand shut-off valves
•    High pressure fittings, valves, pumps and systems
•    High-purity gas delivery fittings, valves, regulators and digital flow controllers
•    Industrial mass flow meters/controllers
•    Medical devices
•    Pressure regulating valves
•    Process control fittings, valves, regulators and manifold valves
 
•    Refrigerant distributors
•    Safety relief valves
•    Solenoid valves
•    Thermostatic expansion valves





- 4 -



Diversified Industrial Segment products include standard products, as well as custom products which are engineered and produced to OEMs’ specifications for application to particular end products. Both standard and custom products are also used in the replacement of original products. Diversified Industrial Segment products are marketed primarily through field sales employees and approximately 12,800 independent distributor locations throughout the world.
Aerospace Systems Segment. The principal products of the Company’s Aerospace Systems Segment include flight control, hydraulic, fuel, fluid conveyance, and engine systems and components used on commercial and military airframe and engine programs.
The Aerospace Systems Segment offers primary and secondary flight control systems and components used for precise control of aircraft rudders, elevators, ailerons and other aerodynamic control surfaces, including the following actuation components:
Electric backup hydraulic
Electrohydraulic
Electrohydrostatic
Electro-mechanical
Hydraulic
The Aerospace Systems Segment offers complete hydraulic systems and components, including:
•    Accumulators
 
•    Automatic bleed valves
 
•    Electrohydraulic servo valves 
•    Electronic controllers and software
•    Engine-driven pumps
•    Filtration manifolds
•    Hydraulic power packs
 

•    Integration packages
•    Motor pumps
•    Power transfer units
•    Reservoirs
•    Selector valves
•    Thrust-reverser systems
 
•    Utility actuators
 

The Aerospace Systems Segment designs and manufactures aircraft wheels, brakes and associated hydraulics components for general aviation, rotorcraft and military markets.

The Aerospace Systems Segment offers complete fuel systems and components, including: 
•    Center of gravity controls
 
•    Electronic monitoring computers and controllers
 
 •    Engine fuel injection atomization nozzles, manifolds and augmentor controls
 
•    Fluid conveyance equipment
 
•    Fuel and pneumatic filtration
 
•    Fuel measurement and management systems    
•    Fuel pumps and valves
 
•    Fuel tank inerting systems
 
•    In-flight refueling systems
 
•    Lightning-safe flame arresters, fuel caps and adapters 
 
•    Refuel, transfer and pressurization controls
•    Water and waste subsystems


The Aerospace Systems Segment offers fluid conveyance systems and components, including:
 
Couplings, quick disconnects, fittings, joints and unions
 
Rigid tube assemblies
 
Rubber, metal, and PTFE hose assemblies
 
Valves and regulators

- 5 -



The Aerospace Systems Segment produces various engine systems and components, including: 
•    Electronic control and monitoring computers
 
•    Engine bleed control and anti-ice systems
 
•    Engine starter systems
 
•    Fluid conveyance systems and engine build units
  
•    Fuel and pneumatic filtration
 
•    Fuel valves and manifolds
•    Heat management
 
•    Low-pressure pneumatic controls
 
•     Motor-driven and hydraulic pumps
•    Oil and lubrication pumps and equipment
•    Pneumatic subsystems
•    Thrust reverser actuation
The Aerospace Systems Segment also offers electronic thermal management heat rejection systems and single-phase and two-phase heat collection systems for radar, inverse synthetic aperture radar, and power electronics.
Aerospace Systems Segment products are marketed by the Company’s regional sales organizations and are sold directly to original equipment manufacturers and end users throughout the world.
Competition
The Company’s business operates in highly competitive markets and industries. The Company offers its products over numerous, varied markets through its 139 divisions operating in 50 countries and consequently has hundreds of competitors when viewed across its various markets and product offerings. The Company’s competitors include U.S. and non-U.S. companies. These competitors and the degree of competition vary widely by product lines, end markets, geographic scope and/or geographic locations. Although each of the Company’s segments has numerous competitors, given the Company’s market and product breadth, no single competitor competes with the Company with respect to all products manufactured and sold by the Company.
In the Diversified Industrial Segment, the Company competes on the basis of product quality and innovation, customer service, manufacturing and distribution capability, and price competitiveness. The Company believes that it is one of the market leaders in most of the major markets for its most significant Diversified Industrial Segment products. The Company has comprehensive motion and control packages for the broadest systems capabilities. While the Company’s primary global competitors include Bosch Rexroth AG, Danfoss A/S, Donaldson Company, Inc., Eaton Corporation plc, Emerson Climate Technologies, Emerson/ASCO, Festo AG, Freudenberg-NOK, IMI/Norgren, Pall Corporation, SMC Corporation, Swagelok Company, and Trelleborg AB, none of these businesses compete with every group in the Company's Diversified Industrial Segment and every product line offered by this segment.
In the Aerospace Systems Segment, the Company has developed alliances with key customers based on the Company’s advanced technological and engineering capabilities, superior performance in quality, delivery, and service, and price competitiveness, which has enabled the Company to obtain significant original equipment business on new aircraft programs for its systems and components and to thereby obtain the follow-on repair and replacement business for these programs. Further, the Aerospace Systems Segment is able to utilize low cost manufacturing techniques for similar product on the Diversified Industrial Segment to achieve a lower cost producer status. Although the Company believes that it is one of the market leaders in most of the major markets for its most significant Aerospace Systems Segment products, the Company’s primary global competitors for the most significant Aerospace Systems Segment products include Eaton Corporation plc, Honeywell International, Inc., Moog Inc., Triumph Group, Inc., UTC Aerospace Systems, Woodward, Inc. and Zodiac Aerospace SA.
The Company believes that its platform utilizing nine core technologies, which consist of aerospace, electromechanical, filtration, fluid handling, hydraulics, pneumatics, process control, refrigeration, and sealing and shielding, is a positive factor in its ability to compete effectively with both large and small competitors. For both of its segments, the Company believes that the following factors also contribute to its ability to compete effectively:
decentralized operating structure that allows each division to focus on its customers and respond quickly at the local level;
systems solution capabilities that use the Company’s core technologies from both of its segments;
global presence; and
a strong global distribution network.

- 6 -



Research and Product Development
The Company continually researches the feasibility of new products and services through its development laboratories and testing facilities in many of its worldwide manufacturing locations. Its research and product development staff includes chemists, physicists, and mechanical, chemical and electrical engineers.
Total research and development costs relating to the development of new products and services and the improvement of existing products and services amounted to $403.1 million in fiscal year 2015, $410.1 million in fiscal year 2014, and $406.6 million in fiscal year 2013. These amounts include costs incurred by the Company related to independent research and development initiatives as well as costs incurred in connection with research and development contracts. Costs incurred in connection with research and development contracts and included in the total research and development costs reported above for each of the respective fiscal years 2015, 2014 and 2013 were $57.8 million, $55.9 million and $58.9 million, respectively.
Patents, Trademarks, Licenses
The Company owns a number of patents, trademarks and licenses related to its products and has exclusive and non-exclusive rights to use a number of patents owned by others. In addition, patent applications on certain products are now pending, although there can be no assurance that patents will be issued. The Company is not dependent to any material extent on any single patent, trademark or license or group of patents, trademarks or licenses.
Backlog and Seasonal Nature of Business
Backlog consists of written firm orders from a customer to deliver products and, in the case of blanket purchase orders, only includes the portion of the order for which a schedule or release date has been agreed to with the customer. The dollar value of backlog is equal to the amount that is expected to be billed to the customer and reported as a sale. The Company’s backlog by business segment for the past two fiscal years, as set forth on pages 13-5 to 13-7 of Exhibit 13 to this Annual Report on Form 10-K, is incorporated into this section by reference. The Company’s backlog was $3.3 billion at June 30, 2015 and $3.9 billion at June 30, 2014. Approximately 81% of the Company’s backlog at June 30, 2015 is scheduled for delivery in the succeeding twelve months. The Company’s business is generally not seasonal in nature.
Environmental Regulation
Certain of the Company’s operations necessitate the use and handling of hazardous materials and, as a result, the Company is subject to United States federal, state, and local laws and regulations as well as non-U.S. laws and regulations designed to protect the environment and regulate the discharge of materials into the environment. These laws impose penalties, fines and other sanctions for non-compliance and liability for response costs, property damage and personal injury resulting from past and current spills, disposals or other releases of, or exposures to, hazardous materials. Among other environmental laws, the Company is subject to the United States federal "Superfund" law, under which the Company has been designated as a "potentially responsible party" and may be liable for cleanup costs associated with various waste sites, some of which are on the United States Environmental Protection Agency’s Superfund priority list.
As of June 30, 2015, the Company was involved in environmental remediation at various United States and non-U.S. manufacturing facilities presently or formerly operated by the Company and as a "potentially responsible party," along with other companies, at off-site waste disposal facilities and regional sites.
The Company believes that its policies, practices and procedures are properly designed to prevent unreasonable risk of environmental damage and the consequent financial liability to the Company. Compliance with environmental laws and regulations requires continuing management efforts and expenditures by the Company. Compliance with environmental laws and regulations has not had in the past, and, the Company believes, will not have in the future, a material adverse effect on the capital expenditures, earnings, or competitive position of the Company.
As of June 30, 2015, the Company had a reserve of $17.0 million for environmental matters that were probable and reasonably estimable. This reserve was recorded based upon the best estimate of costs to be incurred in light of the progress made in determining the magnitude of remediation costs, the timing and extent of remedial actions required by governmental authorities and the amount of the Company’s liability in proportion to other responsible parties.
The Company’s estimated total liability for the above mentioned sites ranges from a minimum of $17.0 million to a maximum of $80.2 million. The largest range of the estimated total liability for any one site is approximately $8.4 million. The actual costs to be incurred by the Company will be dependent on final determination of contamination and required remedial action, negotiations with governmental authorities with respect to cleanup levels, changes in regulatory requirements, innovations in investigatory and remedial technologies, effectiveness of remedial technologies employed, the ability of the other responsible parties to pay, and any insurance or other third-party recoveries.

- 7 -



Energy Matters and Sources and Availability of Raw Materials
The Company’s primary energy source for both of its business segments is electric power. While the Company cannot predict future costs of electric power, the primary source for production of the required electric power will be coal from substantial, proven coal reserves available to electric utilities. The Company is subject to governmental regulations in regard to energy supplies in the United States and elsewhere. To date, the Company has not experienced any significant disruptions of its operations due to energy curtailments.
Steel, brass, copper, aluminum, nickel, rubber and thermoplastic materials and chemicals are the principal raw materials used by the Company. These materials are available from numerous sources in quantities sufficient to meet the requirements of the Company.
Employees
The Company employed approximately 54,750 persons as of June 30, 2015, of whom approximately 28,670 were employed by foreign subsidiaries.
Business Segment Information
The Company’s net sales, segment operating income and assets by business segment and net sales and long-lived assets by geographic area for the past three fiscal years, as set forth on pages 13-15 to 13-16 of Exhibit 13 to this Annual Report on Form 10-K, are incorporated into this section by reference.
Acquisitions
During fiscal year 2015, the Company completed four acquisitions as set forth on pages 13-23 to 13-24 of Exhibit 13 to this Annual Report on Form 10-K, which is incorporated into this section by reference.

ITEM 1A. Risk Factors.
The following "risk factors" identify what the Company believes to be the risks that could materially adversely affect the Company’s financial and/or operational performance. These risk factors should be considered and evaluated together with information incorporated by reference or otherwise included elsewhere in this Annual Report on Form 10-K. Additional risks not currently known to the Company or that the Company currently believes are immaterial also may impair the Company’s business, financial condition, results of operations and cash flows.
The Company may be subject to risks arising from uncertainty in worldwide and regional economic conditions.
The Company's business is sensitive to global macro-economic conditions. Slow economic growth persists in the economic regions in which the Company conducts substantial operations, including Western Europe and Brazil. The continued effects of the global economic downturn and the rate of recovery may have an adverse effect on the business, results of operations and financial condition of the Company and its distributors, customers and suppliers, and on the general economic activity in many of the industries and markets in which the Company and its distributors, customers and suppliers operate. Among the economic factors which may have such an effect are manufacturing and other end-market activity, currency exchange rates, air travel trends, difficulties entering new markets, and general economic conditions such as inflation, deflation, interest rates and credit availability. These factors may, among other things, negatively impact the level of purchases, capital expenditures, and creditworthiness of the Company and its distributors, customers and suppliers, and, therefore, the Company’s revenues, operating profits, margins, and order rates.
The Company has remained focused on maintaining its financial strength by adjusting its cost structure to reflect changing demand levels, engaging in various business realignment initiatives, maintaining a strong balance sheet, and managing its cash. The Company cannot predict changes in worldwide or regional economic conditions, as such conditions are highly volatile and beyond the Company’s control. If these conditions deteriorate or do not return to previous levels, however, the Company’s business, results of operations and financial condition could be materially adversely affected.
The Company may be subject to risks relating to its non-U.S. operations.
The Company’s net sales derived from customers outside the United States were approximately 42% in fiscal 2015 and approximately 44% in each of fiscal 2014 and 2013. In addition, many of the Company’s manufacturing operations and suppliers are located outside the United States. The Company expects net sales from non-U.S. markets to continue to represent a significant portion of its total net sales. The Company’s non-U.S. operations are subject to risks in addition to those facing its domestic operations, including:

- 8 -



fluctuations in currency exchange rates;
limitations on ownership and on repatriation of earnings;
transportation delays and interruptions;
political, social and economic instability and disruptions;
government embargoes or trade restrictions;
the imposition of duties and tariffs and other trade barriers;
import and export controls;
labor unrest and current and changing regulatory environments;
the potential for nationalization of enterprises;
difficulties in staffing and managing multi-national operations;
limitations on the Company’s ability to enforce legal rights and remedies;
potentially adverse tax consequences; and
difficulties in implementing restructuring actions on a timely basis.
If the Company is unable to successfully manage the risks associated with expanding its global business or adequately manage operational fluctuations internationally, the risks could have a material adverse effect on the Company’s business, results of operations or financial condition.
The Company may be subject to risks relating to organizational changes.
The Company regularly executes organizational changes such as acquisitions, divestitures and realignments to support its growth and cost management strategies. The Company also engages in initiatives aimed to increase productivity, efficiencies and cash flow and to reduce costs. The Company further commits significant resources to identify, develop and retain key employees to ensure uninterrupted leadership and direction. If the Company is unable to successfully manage these and other organizational changes, the ability to complete such activities and realize anticipated synergies or cost savings as well as the Company's results of operations and financial condition could be materially adversely affected. The Company also cannot offer assurances that any of these initiatives will continue to be beneficial to the extent anticipated, or that the estimated efficiency improvements, incremental cost savings or cash flow improvements will be realized as anticipated or at all.
The Company may be subject to risks relating to acquisitions and joint ventures.
The Company expects to continue its strategy of identifying and acquiring businesses with complementary products and services, and entering into joint ventures, which it believes will enhance its operations and profitability. However, there can be no assurance that the Company will be able to continue to find suitable businesses to purchase or joint venture opportunities or that it will be able to acquire such businesses or enter into such joint ventures on acceptable terms. In addition, there is no assurance that the Company will be able to avoid acquiring or assuming unexpected liabilities, that the Company will be able to integrate successfully any businesses that it purchases into its existing business or that any acquired businesses or joint ventures will be profitable. The successful integration of new businesses and the success of joint ventures depend on the Company’s ability to manage these new businesses and cut excess costs. If the Company is unable to avoid these risks, its results of operations and financial condition could be materially adversely affected.
The Company may be subject to risks relating to its information technology systems.
The Company relies extensively on information technology systems to manage and operate its business, some of which are managed by third parties. The security and functionality of these information technology systems, and the processing of data by these systems, are critical to our business operations. If these systems, or any part of the systems, are damaged, intruded upon, attacked, shutdown or cease to function properly (whether by planned upgrades, force majeure, telecommunications failures, hardware or software break-ins or viruses, or other cyber-security incidents) and the Company suffers any resulting interruption in its ability to manage and operate its business or if its products are effected, the Company's results of operations and financial condition could be materially adversely affected.

- 9 -



The Company may be subject to risks relating to changes in the demand for and supply of its products.
Demand for and supply of the Company’s products may be adversely affected by numerous factors, some of which the Company cannot predict or control. Such factors include:
changes in business relationships with and purchases by or from major customers, suppliers or distributors, including delays or cancellations in shipments, disputes regarding contract terms or significant changes in financial condition, and changes in contract cost and revenue estimates for new development programs;
changes in product mix;
changes in the market acceptance of the Company’s products;
increased competition in the markets the Company serves;
declines in the general level of industrial production;
weakness in the end-markets the Company serves;
fluctuations in the availability or the prices of raw materials; and
fluctuations in currency exchange rates.
If any of these factors occur, the demand for and supply of the Company’s products could suffer, which could materially adversely affect the Company’s results of operations.
The Company may be subject to risks relating to the development of new products and technologies.
The markets in which the Company operates are characterized by rapidly changing technologies and frequent introductions of new products and services. The Company’s ability to develop new products based on technological innovation can affect its competitive position and often requires the investment of significant resources. If the Company does not develop, or has difficulties or delays in the development of, innovative new and enhanced products and services, or fails to gain market or regulatory acceptance of new products and technologies, the Company's revenues may be materially reduced and the Company's competitive position could be materially adversely affected. In addition, the Company may invest in research and development of products and services, or in acquisitions or other investments, that do not lead to significant revenue, which could adversely affect our profitability.
The Company may be subject to risks arising from price and supply fluctuations in raw materials used in the Company’s production processes and by its suppliers of component parts.
The Company’s supply of raw materials for its businesses could be interrupted for a variety of reasons, including availability and pricing. Prices for raw materials necessary for production have fluctuated significantly in the past and significant increases could adversely affect the Company’s results of operations and profit margins. Although the Company generally attempts to manage these fluctuations by, among other things, passing along increased raw material prices to its customers in the form of price increases, there may be a time delay between the increased raw material prices and the Company’s ability to increase the price of its products, or the Company may be unable to increase the prices of its products due to pricing pressure, contract terms or other factors which could adversely impact results of operations and cash flows.
The Company’s suppliers of component parts may significantly and quickly increase their prices in response to increases in costs of raw materials that they use to manufacture the component parts. As a result, the Company may not be able to increase its prices commensurately with its increased costs. Consequently, the Company’s results of operations or financial condition could be materially adversely affected.
The Company may be subject to risks arising from changes in the competitive environment in which it operates.
The Company’s operations are subject to competition from a wide variety of global, regional and local competitors, which could adversely affect the Company’s results of operations by creating downward pricing pressure and/or a decline in the Company’s margins or market shares. To compete successfully, the Company must excel in terms of product quality and innovation, technological and engineering capability, manufacturing and distribution capability, delivery, price competitiveness, and customer service.
The Company may be subject to risks relating to changes in its tax rates or exposure to additional income tax liabilities.

- 10 -



The Company is subject to income taxes in the United States and various non-U.S. jurisdictions. The Company's domestic and international tax liabilities are dependent upon the location of earnings among these different jurisdictions. The Company’s future results of operation could be adversely affected by changes in the Company's effective tax rate as a result of changes in the mix of earnings in countries with differing statutory tax rates, changes in overall profitability, changes in generally accepted accounting principles, changes in the valuation of deferred tax assets or changes in tax laws. In addition, the amount of income taxes paid by the Company is subject to ongoing audits by United States federal, state and local tax authorities and by non-U.S. tax authorities. If these audits result in assessments different from amounts reserved, future financial results may include unfavorable adjustments to the Company’s tax liabilities, which could have a material adverse effect on the Company’s results of operations.
The Company may be subject to product liability risks.
The Company’s businesses expose it to potential product liability risks that are inherent in the design, manufacture and sale of its products and the products of third-party vendors that the Company uses or resells. Significant product liability claims could have a material adverse effect on the Company’s financial condition, liquidity and results of operations. Although the Company currently maintains what it believes to be suitable and adequate product liability insurance, there can be no assurance that the Company will be able to maintain its insurance on acceptable terms or that its insurance will provide adequate protection against all potential liabilities.
The Company may be subject to risks arising from litigation, legal and regulatory proceedings and obligations.
From time to time, the Company is subject to litigation or other commercial disputes and other legal and regulatory proceedings relating to its business. Due to the inherent uncertainties of any litigation, commercial disputes or other legal or regulatory proceedings, the Company cannot accurately predict their ultimate outcome, including the outcome of any related appeals. An unfavorable outcome could materially adversely impact the Company’s business, financial condition or results of operations. Furthermore, as required by U.S. generally accepted accounting principles, the Company establishes reserves based on its assessment of contingencies, including contingencies related to legal claims asserted against it. Subsequent developments in legal proceedings may affect the Company's assessment and estimates of the loss contingency recorded as a reserve and require the Company to make payments in excess of our reserves, which could have an adverse effect on the Company's results of operations.
The Company is subject to national and international laws and regulations, such as the anti-corruption laws of the U.S. Foreign Corrupt Practices Act and the U.K. Bribery Act, relating to its business and its employees. Despite the Company's policies, procedures and compliance programs, its internal controls and compliance systems may not be able to protect the Company from prohibited acts willfully committed by its employees, agents or business partners that would violate such applicable laws and regulations. Any such improper acts could damage the Company's reputation, subject it to civil or criminal judgments, fines or penalties, and could otherwise disrupt the Company's business, and as a result, could materially adversely impact the Company's business, financial condition or results of operations.
The Company may be subject to risks relating to the preservation of its intellectual property.
Protecting the Company’s intellectual property is critical to its innovation efforts. The Company owns a number of patents, trade secrets, copyrights, trademarks, trade names and other forms of intellectual property in its products and services throughout the world. The Company also has exclusive and non-exclusive rights to intellectual property owned by others. The Company’s intellectual property may be challenged or infringed upon by third parties or the Company may be unable to maintain, renew or enter into new license agreements with third-party owners of intellectual property on reasonable terms. In addition, the global nature of the Company’s business increases the risk that the Company’s intellectual property may be subject to infringement or other unauthorized use by others. In some cases, the Company’s ability to protect its intellectual property rights by legal recourse or otherwise may be limited, particularly in countries where laws or enforcement practices are inadequate or undeveloped. Unauthorized use of the Company’s intellectual property rights or the Company's inability to preserve existing intellectual property rights could adversely impact the Company’s competitive position and results of operations.
The Company may be subject to risks arising from the impact of environmental regulations.
The Company’s operations necessitate the use and handling of hazardous materials and, as a result, it is subject to various United States federal, state and local laws and regulations, as well as non-U.S. laws, designed to protect the environment and to regulate the discharge of materials into the environment. These laws impose penalties, fines and other sanctions for non-compliance and liability for response costs, property damages and personal injury resulting from past and current spills, disposals or other releases of, or the exposure to, hazardous materials. Among other laws, the Company is subject to the United States federal "Superfund" law, under which it has been designated as a "potentially responsible party" and may be liable for

- 11 -



clean-up costs associated with various waste sites, some of which are on the United States Environmental Protection Agency’s Superfund priority list. The Company could incur substantial costs as a result of non-compliance with or liability for cleanup or other costs or damages under environmental laws, including the Superfund law.
In addition, increased worldwide focus on climate change issues has led to recent legislative and regulatory efforts to limit greenhouse gas emissions, including regulation of such emissions through a "cap-and-trade" system globally. Regulation of greenhouse gas emissions and other climate changes concerns could subject the Company to additional costs and restrictions, including increased energy and raw material costs. Until definitive regulations are adopted, the Company is not able to predict how such regulations would affect the Company’s business, operations or financial results.
The Company may be subject to more stringent environmental laws in the future. If more stringent environmental laws are enacted in the future, these laws could have a material adverse effect on the Company’s business, results of operations and financial condition.
The Company may be subject to risks relating to increasing costs of certain employee and retiree benefits.
The funding requirements and the amount of expenses recorded for the Company’s defined benefit pension plans are dependent on changes in market interest rates and the value of plan assets, which are dependent on actual plan asset returns. Significant changes in market interest rates and decreases in the fair value of plan assets and investment losses on plan assets would increase funding requirements and expenses and may adversely impact the Company’s results of operations.
The Company absorbs a portion of healthcare costs for its employees. If healthcare costs rise significantly and the Company continues to absorb the majority of these costs, these increasing costs may adversely impact the Company's future results of operations.
The Company may be subject to risks arising from regulations applicable to companies doing business with the United States government.
In addition to the risks identified herein, doing business with the United States government subjects the Company to unusual risks, including dependence on the level of government spending and compliance with and changes in governmental procurement regulations. Agreements relating to the sale of products to government entities may be subject to termination, reduction or modification, either at the convenience of the government or for the Company’s failure to perform under the applicable contract. The Company is subject to government investigations of business practices and compliance with government procurement regulations. If the Company were charged with wrongdoing as a result of any such investigation, it could be suspended from bidding on or receiving awards of new government contracts, which could have a material adverse effect on the Company’s results of operations.

ITEM 1B. Unresolved Staff Comments. None.


- 12 -



ITEM 1C. Executive Officers of the Registrant.
The Company’s executive officers as of August 15, 2015 were as follows:
 
Name
 
Position
 
Officer
Since(1)
 
Age as of
8/15/2015
Donald E. Washkewicz
 
Chairman of the Board
 
1997
 
65

Thomas L. Williams
 
Chief Executive Officer and Director
 
2005
 
56

Lee C. Banks
 
President, Chief Operating Officer and Director
 
2001
 
52

Jon P. Marten
 
Executive Vice President – Finance & Administration and Chief Financial Officer
 
2008
 
59

Daniel S. Serbin
 
Executive Vice President – Human Resources & External Affairs
 
2005
 
61

Robert W. Bond
 
Vice President and President – Fluid Connectors Group
 
2000
 
57

Yoon "Michael" Chung
 
Vice President and President – Automation Group
 
2008
 
52

Jeffery A. Cullman
 
Vice President and President – Hydraulics Group
 
2006
 
60

John G. Dedinsky, Jr.
 
Vice President – Global Supply Chain and Procurement
 
2006
 
58

William G. Eline
 
Vice President – Chief Information Officer
 
2002
 
59

John R. Greco
 
Vice President and President – Instrumentation Group
 
2006
 
61

Kurt A. Keller
 
Vice President and President – Asia Pacific Group
 
2009
 
57

Joseph R. Leonti
 
Vice President, General Counsel and Secretary
 
2014
 
43

Robert W. Malone
 
Vice President and President – Filtration Group
 
2014
 
51

M. Craig Maxwell
 
Vice President – Chief Technology and Innovation Officer
 
2003
 
57

Andrew D. Ross
 
Vice President and President – Engineered Materials Group
 
2012
 
48

Roger S. Sherrard
 
Vice President and President – Aerospace Group
 
2003
 
49

Catherine A. Suever
 
Vice President and Controller
 
2010
 
56

 
(1)
Officers of the Company are elected by the Board of Directors to serve for a term of one year or until their respective successors are elected, except in the case of death, resignation or removal. Messrs. Bond, Cullman, Dedinsky, Eline, Greco, and Maxwell have served in the executive capacities indicated above opposite their respective names during each of the past five years.
Mr. Washkewicz has been a Director since 2000 and Chairman of the Board since October 2004. He was Chief Executive Officer from July 2001 to February 2015 and President from January 2007 to February 2015.
Mr. Williams has been a Director since January 2015 and Chief Executive Officer since February 2015. He was an Executive Vice President from August 2008 to February 2015 and an Operating Officer from November 2006 to February 2015. He is also a Director of Chart Industries, Inc.
Mr. Banks has been a Director since January 2015 and President and Chief Operating Officer since February 2015. He was an Executive Vice President from August 2008 to February 2015 and an Operating Officer from November 2006 to February 2015. He is also a Director of Nordson Corporation.
Mr. Marten has been Executive Vice President – Finance & Administration and Chief Financial Officer since November 2010. He was Vice President and Controller from August 2008 to December 2010.
Mr. Serbin has been Executive Vice President - Human Resources & External Affairs since July 2014. He was Executive Vice President – Human Resources from January 2011 to July 2014 and Vice President – Human Resources from May 2005 to January 2011.
Mr. Chung has been President of the Automation Group since July 2012 and has been a Vice President since March 2008. He was President of the Asia Pacific Group from March 2008 to July 2012.
Mr. Keller has been President of the Asia-Pacific Group since July 2012 and has been a Vice President since August 2009. He was President of the Engineered Materials Group from August 2009 to July 2012.

- 13 -



Mr. Leonti has been Vice President, General Counsel and Secretary since July 2014. He was Assistant Secretary from April 2011 to July 2014 and Associate General Counsel from January 2008 to July 2014.
Mr. Malone has been Vice President and President of the Filtration Group since December 2014. He was Vice President Operations of the Filtration Group from January 2013 to December 2014 and President and Chief Executive Officer of Purolator Filters (a German joint venture) from April 2006 to January 2013.
Mr. Ross has been a Vice President and President of the Engineered Materials Group since July 2012. He was Vice President of Operations of the Hydraulics Group from July 2011 to July 2012 and General Manager Hydraulic Valve Division from June 2007 to July 2011.
Mr. Sherrard has been President of the Aerospace Group since July 2012 and has been a Vice President since November 2003. He was President of the Automation Group from March 2005 to July 2012.
Ms. Suever has been Vice President and Controller since December 2010. She was Vice President and Controller of the Climate & Industrial Controls Group from November 2008 to December 2010.

ITEM 2. Properties. The Company’s corporate headquarters is located in Cleveland, Ohio, and, at June 30, 2015, the Company had 309 manufacturing plants, 99 distribution centers and 154 sales and administrative offices throughout the world, none of which were individually material to its operations. The facilities are situated in 40 states within the United States and in 49 other countries. The Company owns the majority of its manufacturing plants and its leased properties primarily consist of sales and administrative offices and distribution centers. The number of facilities used by each of the Company’s operating segments is summarized by type and geographic location in the tables below:
 
 
Type of Facility
 
Manufacturing
Plants
 
Distribution
Centers
 
Sales and
Administrative Offices
Diversified Industrial
286

 
95

 
137

Aerospace Systems
23

 
4

 
17

Total
309

 
99

 
154

 
 
Geographic Location
 
North America
 
Europe
 
Asia-Pacific
 
Latin America
Diversified Industrial
234

 
144

 
109

 
31

Aerospace Systems
35

 
5

 
4

 

Total
269

 
149

 
113

 
31


Several facilities are shared among each of the Company’s operating segments. To avoid double counting, each shared facility is counted once, primarily in the Diversified Industrial Segment.
The Company believes that its properties have been adequately maintained, are in good condition generally and are suitable and adequate for its business as presently conducted. The extent to which the Company uses its properties varies by property and from time to time. The Company believes that its restructuring efforts have brought capacity levels closer to present and anticipated needs. Most of the Company’s manufacturing facilities remain capable of handling volume increases.

ITEM 3. Legal Proceedings. Parker ITR S.r.l. (Parker ITR), a subsidiary acquired on January 31, 2002, has been the subject of a number of lawsuits and regulatory investigations. The lawsuits and investigations relate to allegations that for a period of up to 21 years, the Parker ITR business unit that manufactures and sells marine hose, typically used in oil transfer, conspired with competitors in unreasonable restraint of trade to artificially raise, fix, maintain or stabilize prices, rig bids and allocate markets and customers for marine oil and gas hose in the United States and in other jurisdictions. Parker ITR and the Company have cooperated with all of the regulatory authorities investigating the activities of the Parker ITR business unit that manufactures and sells marine hose and continue to cooperate with the investigations that remain ongoing. Several of the investigations and all of the lawsuits have concluded. The following investigation remains pending.
On May 15, 2007, the European Commission issued its initial Request for Information to the Company and Parker ITR. On January 28, 2009, the European Commission announced the results of its investigation of the alleged cartel activities. As

- 14 -



part of its decision, the European Commission found that Parker ITR infringed Article 81 of the European Community Treaty from April 1986 to May 2, 2007 and fined Parker ITR 25.61 million euros. The European Commission also determined that the Company was jointly and severally responsible for 8.32 million euros of the total fine which related to the period from January 2002, when the Company acquired Parker ITR, to May 2, 2007, when the cartel activities ceased. Parker ITR and the Company filed an appeal to the General Court of the European Union on April 10, 2009. On May 12, 2013, the court reversed in part the decision of the European Commission, reducing the original fine of 25.61 million euros to 6.40 million euros and holding that the Company and Parker ITR are jointly and severally liable for payment of the fine up to 6.30 million euros. The European Commission appealed the ruling of the European Court of Justice. On December 18, 2014, the European Court of Justice reversed the ruling of the General Court and referred the case back to the General Court.

ITEM 4. Mine Safety Disclosures. Not applicable.


- 15 -



PART II

ITEM 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.
(a)
Market for the Registrant’s Common Equity. The Company’s common stock is listed for trading on the New York Stock Exchange under the symbol "PH". Information regarding stock price and dividend information with respect to the Company’s common stock, as set forth on page 13-45 of Exhibit 13 to this Annual Report on Form 10-K, is incorporated into this section by reference. As of July 31, 2015, the number of shareholders of record of the Company was 3,906.
(b)
Use of Proceeds. Not Applicable.
(c)
Purchases of Equity Securities by the Issuer and Affiliated Purchasers.

ISSUER PURCHASES OF EQUITY SECURITIES
Period
 
(a) Total
Number
of Shares
Purchased
 
(b) Average
Price Paid
Per Share
 
(c) Total Number of
Shares Purchased
as Part of Publicly
Announced Plans
or Programs (1)
 
(d) Maximum Number
(or Approximate
Dollar Value) of
Shares that May Yet
Be Purchased
Under the Plans or
Programs
April 1, 2015 through April 30, 2015
 
132,400

 
$
120.74

 
132,400

 
24,719,687

May 1, 2015 through May 31, 2015
 
136,900

 
$
122.01

 
136,900

 
24,582,787

June 1, 2015 through June 30, 2015
 
144,631

 
$
119.64

 
144,631

 
24,438,156

Total:
 
413,931

 
$
120.77

 
413,931

 
24,438,156

 
(1)
On August 16, 1990, the Company publicly announced that its Board of Directors authorized the repurchase by the Company of up to 3 million shares of its common stock. From time to time thereafter, the Board of Directors has adjusted the overall maximum number of shares authorized for repurchase under this program. On October 22, 2014, the Company publicly announced that the Board of Directors increased the overall maximum number of shares authorized for repurchase under this program so that, beginning on such date, the aggregate number of shares authorized for repurchase was 35 million shares. There is no limitation on the amount of shares that can be repurchased in a fiscal year. There is no expiration date for this program.


ITEM 6. Selected Financial Data. The information set forth on page 13-48 of Exhibit 13 to this Annual Report on Form 10-K is incorporated into this section by reference.

ITEM 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations. The information set forth on pages 13-2 to 13-12 of Exhibit 13 to this Annual Report on Form 10-K is incorporated into this section by reference.

ITEM 7A. Quantitative and Qualitative Disclosures About Market Risk. The information set forth on page 13-10 of Exhibit 13 to this Annual Report on Form 10-K is incorporated into this section by reference.

ITEM 8. Financial Statements and Supplementary Data. The information set forth on pages 13-13 to 13-45 of Exhibit 13 to this Annual Report on Form 10-K is incorporated into this section by reference.

ITEM 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure. None.

ITEM 9A. Controls and Procedures. The Company carried out an evaluation, under the supervision and with the participation of the Company’s management, including the Company’s principal executive officer and principal financial officer, of the effectiveness of the Company’s disclosure controls and procedures as of June 30, 2015. Based on this evaluation, the Company’s principal executive officer and principal financial officer concluded that, as of the end of fiscal year 2015, the Company’s disclosure controls and procedures were effective.

- 16 -



Management’s Report on Internal Control over Financial Reporting set forth on page 13-46 of Exhibit 13 to this Annual Report on Form 10-K is incorporated into this section by reference. The Report of Independent Registered Public Accounting Firm set forth on page 13-47 of Exhibit 13 to this Annual Report on Form 10-K is incorporated into this section by reference.
There was no change in the Company’s internal control over financial reporting during the quarter ended June 30, 2015 that materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting.

ITEM 9B. Other Information. None.

PART III

ITEM 10. Directors, Executive Officers and Corporate Governance. Information required with respect to the Directors of the Company is set forth under the caption "Item I – Election of Directors" in the definitive Proxy Statement for the Company’s 2015 Annual Meeting of Shareholders, to be held October 28, 2015 (the "2015 Proxy Statement"), and is incorporated herein by reference. Information with respect to the executive officers of the Company is included in Part I, Item 1C hereof under the caption "Executive Officers of the Registrant."

The information set forth under the caption "Section 16(a) Beneficial Ownership Reporting Compliance" in the 2015 Proxy Statement is incorporated herein by reference.
The Company has adopted a Global Code of Business Conduct that applies to its Chief Executive Officer, Chief Financial Officer and Controller. The Global Code of Business Conduct is posted on the Company’s investor relations internet website at www.phstock.com under the Corporate Governance page. Any amendment to, or waiver from, a provision of the Company’s Global Code of Business Conduct that applies to its Chief Executive Officer, Chief Financial Officer or Controller will also be posted at www.phstock.com under the Corporate Governance page.
The information set forth under the captions "The Audit Committee" and "Report of the Audit Committee" in the 2015 Proxy Statement is incorporated herein by reference.

ITEM 11. Executive Compensation. The information set forth under the captions "Compensation Discussion and Analysis," "Compensation Committee Report," and "Compensation Tables" in the 2015 Proxy Statement is incorporated herein by reference.

ITEM 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters. The information set forth under the caption "Principal Shareholders" in the 2015 Proxy Statement is incorporated herein by reference.

Equity Compensation Plan Information. The following table sets forth certain information regarding the Company's equity compensation plans as of June 30, 2015, unless otherwise indicated.
 
Plan Category
Column (a)  
Column (b)  
Column (c)  
Number of securities to  
be issued upon exercise  
of outstanding options,  
warrants and rights  
Weighted-average  
exercise price of  
outstanding options,  
warrants and rights  
Number of securities  
remaining available for 
future issuance under  
equity compensation  
plans (excluding  
securities reflected in  
column (a))  
Equity compensation plans approved by security holders
10,374,316

(1)
$81.19
15,881,431

(2)
Equity compensation plans not approved by security holders

 


 
Total
10,374,316

 
$81.19
15,881,431

 
(1)
Includes the maximum future payouts of common stock that may be issued under the calendar year 2013-14-15, 2014-15-16 and 2015-16-17 long term incentive performance awards, or LTIP Awards. For these LTIP Awards, payouts will be determined based on our achieving an average return on average equity of 4% or an average free cash flow margin of 4%. If these performance measures are achieved, the participants will be eligible to receive the maximum payout of 200%. The Human Resources and Compensation Committee will then compare our performance to that of a group of our peers and, if appropriate, apply its discretion to reduce the final payouts based on any performance measures that the Committee determines to be appropriate. Also includes 38,480 phantom shares held in an account pursuant to the Stock Option Deferral Plan (which plan

- 17 -



has not been approved by shareholders). The phantom shares resulted from exercises of stock options granted under the 1990 Employees Stock Option Plan, which was approved by the shareholders. No further deferral elections may be made under the Stock Option Deferral Plan.
 
(2)
The maximum number of shares of our common stock that may be issued under the Amended and Restated 2009 Omnibus Stock Incentive Plan is 14.7 million shares of which approximately 5.9 million shares are available for future issuance. The maximum number of shares that may be issued under the 2004 Non-Employee Directors' Stock Incentive Plan is 375,000 shares. No further awards will be granted under the 2004 Non-Employee Directors' Stock Incentive Plan. The maximum number of shares that may be issued under the Global Employee Stock Purchase Plan is 10 million shares of which all shares are still available for future issuance.
 
ITEM 13. Certain Relationships and Related Transactions, and Director Independence. The information set forth under the captions "Review and Approval of Transactions with Related Persons" and "Director Independence" in the 2015 Proxy Statement is incorporated herein by reference.

ITEM 14. Principal Accountant Fees and Services. The information set forth under the captions "Audit Fees," "Audit-Related Fees," "Tax Fees," "All Other Fees" and "Audit Committee Pre-Approval Policies and Procedures" in the 2015 Proxy Statement is incorporated herein by reference.


- 18 -



PART IV







ITEM 15. Exhibits and Financial Statement Schedules.

a.
The following are filed as part of this report:

1.
Financial Statements and Schedule
The financial statements and schedule listed in the accompanying Index to Consolidated Financial Statements and Schedule are filed or incorporated by reference as part of this Annual Report on Form 10-K.
2.
Exhibits
The exhibits listed in the accompanying Exhibit Index and required by Item 601 of Regulation S-K (numbered in accordance with Item 601 of Regulation S-K) are filed, furnished or incorporated by reference as part of this Annual Report on Form 10-K.

- 19 -



SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
 
 
PARKER-HANNIFIN CORPORATION
 
 
 
 
By:
 
/s/ Jon P. Marten
 
 
 
Jon P. Marten
 
 
 
Executive Vice President - Finance &
 
 
 
Administration and Chief Financial Officer

August 26, 2015
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the date indicated.
Signature and Title
THOMAS L. WILLIAMS, Principal Executive Officer and Director; CATHERINE A. SUEVER, Principal Accounting Officer; DONALD E. WASHKEWICZ, Chairman of the Board of Directors; LEE C. BANKS, Director; ROBERT G. BOHN, Director; LINDA S. HARTY, Director; WILLIAM E. KASSLING, Director; ROBERT J. KOHLHEPP, Director; KEVIN A. LOBO, Director; KLAUS-PETER MÜLLER, Director; CANDY M. OBOURN, Director; JOSEPH SCAMINACE, Director; WOLFGANG R. SCHMITT, Director; ÅKE SVENSSON, Director; and JAMES L. WAINSCOTT, Director.
Date: August 26, 2015
 
/s/ Jon P. Marten
 
Jon P. Marten, Executive Vice President –
Finance & Administration and Chief Financial
Officer (Principal Financial Officer and
Attorney-in-Fact)
 

- 20 -



PARKER-HANNIFIN CORPORATION
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS AND SCHEDULE
 
 
Reference
 
Form 10-K
Annual Report
(Page)
 
Excerpt from
Exhibit  13
(Page)
Data incorporated by reference from Exhibit 13:
 
 
 
Management’s Report on Internal Control over Financial Reporting
—  
 
13 - 46
Report of Independent Registered Public Accounting Firm
—  
 
13 - 47
Consolidated Statement of Income for the years ended June 30, 2015, 2014 and 2013
—  
 
13 - 13
Consolidated Statement of Comprehensive Income for the years ended June 30, 2015, 2014 and 2013
—  
 
13 - 14
Business Segment Information
—  
 
13 - 15 to 13 - 16
Consolidated Balance Sheet at June 30, 2015 and 2014
—  
 
13 - 17
Consolidated Statement of Cash Flows for the years ended June 30, 2015, 2014 and 2013
—  
 
13 - 18
Consolidated Statement of Equity for the years ended June 30, 2015, 2014 and 2013
—  
 
13 - 19
Notes to Consolidated Financial Statements
—  
 
13 - 20 to 13 - 45
Schedule:
 
 
 
II - Valuation and Qualifying Accounts
22
 
—  

Individual financial statements and related applicable schedules for the Registrant (separately) have been omitted because the Registrant is primarily an operating company and its subsidiaries are considered to be wholly-owned.

- 21 -



PARKER-HANNIFIN CORPORATION
SCHEDULE II - VALUATION AND QUALIFYING ACCOUNTS
FOR THE YEARS ENDED JUNE 30, 2013, 2014 and 2015
(Dollars in Thousands)

 
Column A
 
Column B
 
Column C
 
Column D
 
Column E
Description
 
Balance at
Beginning
Of Period
 
Additions
Charged to
Costs and
Expenses
 
Other
(Deductions)/
Additions (A)
 
Balance
At End
Of Period
Allowance for doubtful accounts:
 
 
 
 
 
 
 
 
Year ended June 30, 2013
 
$
10,518

 
$
8,769

 
$
(4,463
)
 
$
14,824

Year ended June 30, 2014
 
$
14,824

 
$
9,649

 
$
(8,433
)
 
$
16,040

Year ended June 30, 2015
 
$
16,040

 
$
2,685

 
$
(9,441
)
 
$
9,284

Deferred tax asset valuation allowance:
 
 
 
 
 
 
 
 
Year ended June 30, 2013
 
$
176,079

 
$
97,334

 
$

 
$
273,413

Year ended June 30, 2014
 
$
273,413

 
$
74,032

 
$
1,392

 
$
348,837

Year ended June 30, 2015
 
$
348,837

 
$
(18,831
)
 
$

 
$
330,006


(A)
For allowance for doubtful accounts, net balance is comprised of deductions due to uncollectible accounts charged off, additions due to acquisitions or recoveries, and currency translation adjustments. For deferred tax asset valuation allowance, the balance primarily represents adjustments due to acquisitions and net operating losses.

- 22 -



Exhibit Index
 
Exhibit No.
 
Description of Exhibit
 
 
Articles of Incorporation and By-Laws:
 
 
 
(3)(a)
 
Amended Articles of Incorporation incorporated by reference to Exhibit 3 to the Registrant’s Report on Form 10-Q for the quarterly period ended September 30, 1997 (Commission File No. 1-4982).
 
 
 
(3)(b)
 
Code of Regulations, as amended, incorporated by reference to Exhibit 3(ii) to the Registrant’s Report on Form 10-Q for the quarterly period ended December 31, 2007 (Commission File No. 1-4982).
 
 
 
 
 
Instruments Defining Rights of Security Holders:
 
 
 
(4)(a)
 
Shareholder Protection Rights Agreement, dated as of February 8, 2007, between the Registrant and Wells Fargo Bank, N.A. (as successor to National City Bank), as Rights Agent, incorporated by reference to Exhibit 1 to the Registrant’s Form 8-A filed on February 8, 2007 (Commission File No. 1-4982).
 
 
 
(4)(b)
 
First Amendment to Shareholder Protection Rights Agreement, dated as of July 6, 2009, between the Registrant and Wells Fargo Bank, N.A. (as successor to National City Bank), as Rights Agent, incorporated by reference to Exhibit 4(a) to the Registrant’s Report on Form 10-K for the fiscal year ended June 30, 2009 (Commission File No. 1-4982).
 
 
 
 
 
The Registrant is a party to other instruments, copies of which will be furnished to the Commission upon request, defining the rights of holders of its long-term debt identified in Note 9 of the Notes to Consolidated Financial Statements on page 13-30 of Exhibit 13 hereto, which Note is incorporated herein by reference.
 
 
 
 
 
Material Contracts:
 
 
 
(10)(a)
 
Form of Parker-Hannifin Corporation Amended and Restated Change in Control Severance Agreement entered into by the Registrant and executive officers incorporated by reference to Exhibit 10(a) to the Registrant’s Report on Form 10-Q for the quarterly period ended September 30, 2008 (Commission File No. 1-4982).
 
 
 
(10)(b)
 
Termination Amendment to Parker-Hannifin Corporation Amended and Restated Change in Control Severance Agreement between Donald E. Washkewicz and the Registrant effective February 1, 2015 incorporated by reference to Exhibit 10(b) to the Registrant’s Report on Form 10-Q for the quarterly period ended March 31, 2015 (Commission File No. 1-4982).
 
 
 
(10)(c)
 
Parker-Hannifin Corporation Amended and Restated Change in Control Severance Plan incorporated by reference to Exhibit 10(b) to the Registrant’s Report on Form 10-Q for the quarterly period ended September 30, 2008 (Commission File No. 1-4982).
 
 
 
(10)(d)
 
Form of Indemnification Agreement entered into by the Registrant and its directors and executive officers incorporated by reference to Exhibit 10(c) to the Registrant’s Report on Form 10-K for the fiscal year ended June 30, 2003 (Commission File No. 1-4982).
 
 
 
(10)(e)
 
Description of the Parker-Hannifin Corporation Officer Life Insurance Plan incorporated by reference to Exhibit 10(h) to the Registrant’s Report on Form 10-K for the fiscal year ended June 30, 2005 (Commission File No. 1-4982).
 
 
 
(10)(f)
 
Parker-Hannifin Corporation Amended and Restated Supplemental Executive Retirement Benefits Program incorporated by reference to Exhibit 10(a) to the Registrant’s Report on Form 10-Q for the quarterly period ended September 30, 2009 (Commission File No. 1-4982).
 
 
 
(10)(g)
 
Amendment to Parker-Hannifin Corporation Amended and Restated Supplemental Executive Retirement Benefits Program, effective April 15, 2010, incorporated by reference to Exhibit 10.1 to the Registrant’s Report on Form 8-K filed with the Commission on April 21, 2010 (Commission File No. 1-4982).
 
 
 
(10)(h)
 
Amendment to Parker-Hannifin Corporation Amended and Restated Supplemental Executive Retirement Benefits Program, effective January 27, 2011, incorporated by reference to Exhibit 10(a) to the Registrant’s Report on Form 10-Q for the quarterly period ended March 31, 2011 (Commission File No. 1-4982).
 
 
 
(10)(i)
 
Parker-Hannifin Corporation Defined Contribution Supplemental Executive Retirement Benefits Program adopted January 21, 2015 incorporated by reference to Exhibit 10(a) to the Registrant’s Report on Form 10-Q for the quarterly period ended March 31, 2015 (Commission File No. 1-4982).
 
 
 
(10)(j)
 
Form of Notice of Change to Long Term Disability Benefit and Tax Election Form for certain executive officers incorporated by reference to Exhibit 10(j) to the Registrant’s Report on Form 10-K for the fiscal year ended June 30, 2007 (Commission File No. 1-4982).
 
 
 

- 23 -



(10)(k)
 
Parker-Hannifin Corporation Amended and Restated 2003 Stock Incentive Plan incorporated by reference to Exhibit 10(b) to the Registrant’s Report on Form 10-Q for the quarterly period ended September 30, 2010 (Commission File No. 1-4982).
 
 
 
(10)(l)
 
Parker-Hannifin Corporation Amended and Restated 2009 Omnibus Stock Incentive Plan incorporated by reference to Appendix A to the Registrant’s Definitive Proxy Statement filed with the Commission on September 24, 2012 (Commission File No. 1-4982).
 
 
 
(10)(m)
 
Parker-Hannifin Corporation 2010 Performance Bonus Plan incorporated by reference to Exhibit A to the Registrant’s Definitive Proxy Statement filed with the Commission on September 27, 2010 (Commission File No. 1-4982).
 
 
 
(10)(n)
 
Form of 2007 Notice of Grant of Stock Options with Tandem Stock Appreciation Rights for executive officers incorporated by reference to Exhibit 10.3 to the Registrant’s Report on Form 8-K filed with the Commission on August 22, 2006 (Commission File No. 1-4982).
 
 
 
(10)(o)
 
Form of 2008 Notice of Grant of Stock Options with Tandem Stock Appreciation Rights for executive officers incorporated by reference to Exhibit 10.1 to the Registrant’s Report on Form 8-K/A filed with the Commission on September 5, 2007 (Commission File No. 1-4982).
 
 
 
(10)(p)
 
Form of 2009 Notice of Stock Options Award with Tandem Stock Appreciation Rights for executive officers incorporated by reference to Exhibit 10(d) to the Registrant’s Report on Form 10-Q for the quarterly period ended September 30, 2008 (Commission File No. 1-4982).
 
 
 
(10)(q)
 
Form of 2010 Notice of Stock Options with Tandem Stock Appreciation Rights for executive officers incorporated by reference to Exhibit 10(d) to the Registrant’s Report on Form 10-Q for the quarterly period ended September 30, 2009 (Commission File No. 1-4982).
 
 
 
(10)(r)
 
Form of FY2011 Parker-Hannifin Corporation Stock Appreciation Rights Award Agreement for executive officers incorporated by reference to Exhibit 10.2 to the Registrant’s Report on Form 8-K filed with the Commission on August 17, 2010 (Commission File No. 1-4982).
 
 
 
(10)(s)
 
FY2011 Parker-Hannifin Corporation Stock Appreciation Rights Terms and Conditions for executive officers incorporated by reference to Exhibit 10.1 to the Registrant’s Report on Form 8-K filed with the Commission on August 17, 2010 (Commission File No. 1-4982).
 
 
 
(10)(t)
 
Form of Parker-Hannifin Corporation Stock Appreciation Rights Award Agreement for executive officers incorporated by reference to Exhibit 10(a) to the Registrant’s Report on Form 10-Q for the quarterly period ended September 30, 2011 (Commission File No. 1-4982).
 
 
 
(10)(u)
 
Parker-Hannifin Corporation Stock Appreciation Rights Terms and Conditions for executive officers incorporated by reference to Exhibit 10(b) to the Registrant’s Report on Form 10-Q for the quarterly period ended September 30, 2011(Commission File No. 1-4982).
 
 
 
(10)(v)
 
Parker-Hannifin Corporation Target Incentive Plan incorporated by reference to Exhibit 10(d) to the Registrant’s Report on Form 10-Q for the quarterly period ended September 30, 2010 (Commission File No. 1-4982).
 
 
 
(10)(w)
 
Parker-Hannifin Corporation Target Incentive Plan Subject to Performance Bonus Plan incorporated by reference to Exhibit 10(e) to the Registrant’s Report on Form 10-Q for the quarterly period ended September 30, 2010 (Commission File No. 1-4982).
 
 
 
(10)(x)
 
Parker-Hannifin Corporation Long-Term Incentive Performance Plan Under the Performance Bonus Plan incorporated by reference to Exhibit 10(a) to the Registrant’s Report on Form 10-Q for the quarterly period ended March 31, 2013 (Commission File No. 1-4982).
 
 
 
(10)(y)
 
Form of Parker-Hannifin Corporation Long-Term Incentive Performance Award Under the Performance Bonus Plan incorporated by reference to Exhibit 10.2 to the Registrant’s Report on Form 8-K filed with the Commission on February 1, 2011 (Commission File No. 1-4982).
 
 
 
(10)(z)
 
Terms and Conditions of Restricted Stock Issued as a Payout Under the LTI Plan incorporated by reference to Exhibit 10(i) to the Registrant's Report on Form 10-Q for the quarterly period ended September 30, 2010 (Commission File No. 1-4982).
 
 
 
(10)(aa)
 
Parker-Hannifin Corporation Restricted Stock Unit Award Agreement dated August 14, 2013 for Jeffery A. Cullman incorporated by reference to Exhibit 10(a) to the Registrant's Report on Form 10-Q for the quarterly period ended September 30, 2014 (Commission File No. 1-4982).
 
 
 
(10)(bb)
 
Parker-Hannifin Corporation Restricted Stock Unit Terms and Conditions for Jeffery A. Cullman incorporated by reference to Exhibit 10(b) to the Registrant's Report on Form 10-Q for the quarterly period ended September 30, 2014 (Commission File No. 1-4982).
 
 
 

- 24 -



(10)(cc)
 
Parker-Hannifin Corporation Profitable Growth Incentive Plan incorporated by reference to Exhibit 10(c) to the Registrant's Report on Form 10-Q for the quarterly period ended September 30, 2014 (Commission File No. 1-4982).
 
 
 
(10)(dd)
 
Form of Notice of RONA Bonus Award Under the Parker-Hannifin Corporation Performance Bonus Plan incorporated by reference to Exhibit 10(h) to the Registrant’s Report on Form 10-Q for the quarterly period ended September 30, 2009 (Commission File No. 1-4982).
 
 
 
(10)(ee)
 
Parker-Hannifin Corporation RONA Plan Subject to Performance Bonus Plan incorporated by reference to Exhibit 10(f) to the Registrant’s Report on Form 10-Q for the quarterly period ended September 30, 2010 (Commission File No. 1-4982).
 
 
 
(10)(ff)
 
Parker-Hannifin Corporation Summary of RONA Bonus Awards in Lieu of Certain Executive Perquisites incorporated by reference to Exhibit 10(h) to the Registrant’s Report on Form 10-Q for the quarterly period ended September 30, 2008 (Commission File No. 1-4982).
 
 
 
(10)(gg)
 
Parker-Hannifin Corporation Amended and Restated Savings Restoration Plan incorporated by reference to Exhibit 10(i) to the Registrant’s Report on Form 10-Q for the quarterly period ended September 30, 2008 (Commission File No. 1-4982).
 
 
 
(10)(hh)
 
Parker-Hannifin Corporation Amended and Restated Pension Restoration Plan incorporated by reference to Exhibit 10(j) to the Registrant’s Report on Form 10-Q for the quarterly period ended September 30, 2008 (Commission File No. 1-4982).
 
 
 
(10)(ii)
 
Amendment to Parker-Hannifin Corporation Amended and Restated Pension Restoration Plan, effective January 1, 2010, incorporated by reference to Exhibit 10(bb) to the Registrant’s Report on Form 10-K for the fiscal year ended June 30, 2010 (Commission File No. 1-4982).
 
 
 
(10)(jj)
 
Amendment to Parker-Hannifin Corporation Amended and Restated Pension Restoration Plan, effective January 27, 2011, incorporated by reference to Exhibit 10(b) to the Registrant’s Report on Form 10-Q for the quarterly period ended March 31, 2011 (Commission File No. 1-4982).
 
 
 
(10)(kk)
 
Parker-Hannifin Corporation Amended and Restated Executive Deferral Plan incorporated by reference to Exhibit 10(k) to the Registrant’s Report on Form 10-Q for the quarterly period ended September 30, 2008 (Commission File No. 1-4982).
 
 
 
(10)(ll)
 
Parker-Hannifin Corporation Volume Incentive Plan incorporated by reference to Exhibit 10.1 to the Registrant’s Report on Form 8-K filed with the Commission on August 18, 2009 (Commission File No. 1-4982).
 
 
 
(10)(mm)
 
Parker-Hannifin Corporation Global Employee Stock Purchase Plan incorporated by reference to Appendix A to the Registrant's Definitive Proxy Statement filed with the Securities and Exchange Commission on September 22, 2014 (Commission File No. 1-4982).
 
 
 
(10)(nn)
 
Parker-Hannifin Corporation Claw-back Policy incorporated by reference to Exhibit 10.2 to the Registrant’s Report on Form 8-K filed with the Commission on August 18, 2009 (Commission File No. 1-4982).
 
 
 
(10)(oo)
 
Parker-Hannifin Corporation Amended and Restated 2004 Non-Employee Directors’ Stock Incentive Plan incorporated by reference to Exhibit 10(aa) to the Registrant’s Report on Form 10-K for the fiscal year ended June 30, 2009 (Commission File No. 1-4982).
 
 
 
(10)(pp)
 
Form of Parker-Hannifin Corporation Non-Employee Directors’ Restricted Stock Award Agreement incorporated by reference to Exhibit 10(a) to the Registrant’s Report on Form 10-Q for the quarterly period ended December 31, 2011 (Commission File No. 1-4982).
 
 
 
(10)(qq)
 
Parker-Hannifin Corporation Non-Employee Directors’ Restricted Stock Award Terms and Conditions incorporated by reference to Exhibit 10(b) to the Registrant’s Report on Form 10-Q for the quarterly period ended December 31, 2011 (Commission File No. 1-4982).
 
 
 
(10)(rr)
 
Amended and Restated Deferred Compensation Plan for Directors of Parker-Hannifin Corporation incorporated by reference to Exhibit 10(b) to the Registrant's Report on Form 10-A for the quarterly period ended September 30, 2008 (Commission File No. 1-4982).
 
 
 
(10)(ss)
 
Summary of the Compensation of the Non-Employee Members of the Board of Directors, effective October 24, 2012, incorporated by reference to Exhibit 10(b) to the Registrant’s Report on Form 10-Q for the quarterly period ended December 31, 2012 (Commission File No. 1-4982).
 
 
 
(10)(tt)
 
Summary of the Compensation of the Non-Employee Members of the Board of Directors, effective October 22, 2014, incorporated by reference to Exhibit 10(b) to the Registrant’s Report on Form 10-Q for the quarterly period ended December 31, 2014 (Commission File No. 1-4982).
 
 
 

- 25 -



(11)
 
Computation of Common Shares Outstanding and Earnings Per Share is incorporated by reference to Note 5 of the Notes to Consolidated Financial Statements on page 13-27 of Exhibit 13 hereto.*
 
 
 
(12)
 
Computation of Ratio of Earnings to Fixed Charges as of June 30, 2015.*
 
 
 
(13)
 
Excerpts from Annual Report to Shareholders for the fiscal year ended June 30, 2015 which are incorporated herein by reference thereto.*
 
 
 
(21)
 
List of subsidiaries of the Registrant.*
 
 
 
(23)
 
Consent of Independent Registered Public Accounting Firm.*
 
 
 
(24)
 
Power of Attorney.*
 
 
 
(31)(a)
 
Certification of the Principal Executive Officer Pursuant to 17 CFR 240.13a-14(a), as Adopted Pursuant to §302 of the Sarbanes-Oxley Act of 2002.*
 
 
 
(31)(b)
 
Certification of the Principal Financial Officer Pursuant to 17 CFR 240.13a-14(a), as Adopted Pursuant to §302 of the Sarbanes-Oxley Act of 2002.*
 
 
 
(32)
 
Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to §906 of the Sarbanes-Oxley Act of 2002.*
 
 
 
101.INS
 
XBRL Instance Document.*
 
 
 
101.SCH
 
XBRL Taxonomy Extension Schema Document.*
 
 
 
101.CAL
 
XBRL Taxonomy Extension Calculation Linkbase Document.*
 
 
 
101.DEF
 
XBRL Taxonomy Extension Definition Linkbase Document.*
 
 
 
101.LAB
 
XBRL Taxonomy Extension Label Linkbase Document.*
 
 
 
101.PRE
 
XBRL Taxonomy Extension Presentation Linkbase Document.*

*
Submitted electronically herewith.

Attached as Exhibit 101 to this report are the following formatted in XBRL (Extensible Business Reporting Language): (i) Consolidated Statement of Income for the years ended June 30, 2015, 2014 and 2013, (ii) Consolidated Statement of Comprehensive Income for the years ended June 30, 2015, 2014 and 2013, (iii) Consolidated Balance Sheet at June 30, 2015 and 2014, (iv) Consolidated Statement of Cash Flows for the years ended June 30, 2015, 2014 and 2013, (v) Consolidated Statement of Equity for the years ended June 30, 2015, 2014 and 2013, and (vi) Notes to Consolidated Financial Statements.
Shareholders may request a copy of any of the exhibits to this Annual Report on Form 10-K by writing to the Secretary, Parker-Hannifin Corporation, 6035 Parkland Boulevard, Cleveland, Ohio 44124-4141.

- 26 -