Table of Contents

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, DC 20549

 

 

FORM 10-Q

 

 

(Mark One)

☒	QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended June 30, 2018

OR

 

☐	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from                      to                     

Commission file number 000-01227

 

 

Chicago Rivet & Machine Co.

(Exact Name of Registrant as Specified in Its Charter)

 

 

 

Illinois		36-0904920
(State or Other Jurisdiction of Incorporation or Organization)		(I.R.S. Employer Identification No.)
901 Frontenac Road, Naperville, Illinois		60563
(Address of Principal Executive Offices)		(Zip Code)

(630) 357-8500

Registrant’s Telephone Number, Including Area Code

 

 

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ☒    No  ☐

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate website, if any, every interactive data file required to be submitted and posted pursuant to Rule 405 of Regulation S-T (section 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ☒    No  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer”, “accelerated filer”, “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act. (Check one):

 

Large accelerated filer		☐		Accelerated filer		☐
Non-accelerated filer		☐  (Do not check if smaller reporting company)		Smaller reporting company		☒
				Emerging growth company		☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ☐    No  ☒

As of August 3, 2018, there were 966,132 shares of the registrant’s common stock outstanding.

 

 

 

---

Table of Contents

CHICAGO RIVET & MACHINE CO.

INDEX

 

				Page
PART I.		FINANCIAL INFORMATION (Unaudited)
		Condensed Consolidated Balance Sheets at June 30, 2018 and December 31, 2017			2-3
		Condensed Consolidated Statements of Income for the Three and Six Months Ended June 30, 2018 and 2017			4
		Condensed Consolidated Statements of Retained Earnings for the Six Months Ended June 30, 2018 and 2017			5
		Condensed Consolidated Statements of Cash Flows for the Six Months Ended June 30, 2018 and 2017			6
		Notes to the Condensed Consolidated Financial Statements			7-10
		Management’s Discussion and Analysis of Financial Condition and Results of Operations			11
		Controls and Procedures			13
PART II.		OTHER INFORMATION			14

 

1

---

Table of Contents

Item 1.

Financial Statements.

CHICAGO RIVET & MACHINE CO.

Condensed Consolidated Balance Sheets

June 30, 2018 and December 31, 2017

 

		June 30, 2018				December 31, 2017
		(Unaudited)
Assets
Current Assets:
Cash and cash equivalents		$	1,287,212			$	1,152,569
Certificates of deposit			7,063,000				7,810,000
Accounts receivable - Less allowances of $140,000			6,907,426				5,326,650
Inventories, net			5,450,221				4,528,100
Prepaid income taxes			—				84,112
Other current assets			330,476				357,918
Total current assets			21,038,335				19,259,349
Property, Plant and Equipment:
Land and improvements			1,535,434				1,535,434
Buildings and improvements			8,039,831				8,039,831
Production equipment and other			35,005,062				34,607,507
			44,580,327				44,182,772
Less accumulated depreciation			32,041,193				31,625,819
Net property, plant and equipment			12,539,134				12,556,953
Total assets		$	33,577,469			$	31,816,302

 

See Notes to the Condensed Consolidated Financial Statements

 

2

---

Table of Contents

CHICAGO RIVET & MACHINE CO.

Condensed Consolidated Balance Sheets

June 30, 2018 and December 31, 2017

 

		June 30, 2018				December 31, 2017
			(Unaudited)
Liabilities and Shareholders’ Equity
Current Liabilities:
Accounts payable		$	1,516,822			$	737,040
Accrued wages and salaries			921,288				674,316
Other accrued expenses			632,485				495,132
Unearned revenue and customer deposits			221,570				312,775
Total current liabilities			3,292,165				2,219,263
Deferred income taxes			710,084				737,084
Total liabilities			4,002,249				2,956,347
Commitments and contingencies (Note 3)
Shareholders’ Equity:
Preferred stock, no par value, 500,000 shares authorized: none outstanding			—				—
Common stock, $1.00 par value, 4,000,000 shares authorized: 1,138,096 shares issued; 966,132 shares outstanding			1,138,096				1,138,096
Additional paid-in capital			447,134				447,134
Retained earnings			31,912,088				31,196,823
Treasury stock, 171,964 shares at cost			(3,922,098	)			(3,922,098	)
Total shareholders’ equity			29,575,220				28,859,955
Total liabilities and shareholders’ equity		$	33,577,469			$	31,816,302

See Notes to the Condensed Consolidated Financial Statements

 

3

---

Table of Contents

CHICAGO RIVET & MACHINE CO.

Condensed Consolidated Statements of Income

For the Three and Six Months Ended June 30, 2018 and 2017

(Unaudited)

 

		Three Months Ended June 30,								Six Months Ended June 30,
		2018				2017				2018				2017
Net sales		$	9,792,784			$	9,435,508			$	19,804,425			$	18,918,835
Cost of goods sold			7,504,350				7,366,100				15,172,986				14,592,916
Gross profit			2,288,434				2,069,408				4,631,439				4,325,919
Selling and administrative expenses			1,411,969				1,420,575				2,876,687				2,926,847
Operating profit			876,465				648,833				1,754,752				1,399,072
Other income			37,627				22,522				71,128				43,205
Income before income taxes			914,092				671,355				1,825,880				1,442,277
Provision for income taxes			211,000				209,000				415,000				469,000
Net income		$	703,092			$	462,355			$	1,410,880			$	973,277
Per share data, basic and diluted:
Net income per share		$	0.73			$	0.48			$	1.46			$	1.01
Average common shares outstanding			966,132				966,132				966,132				966,132
Cash dividends declared per share		$	0.21			$	0.20			$	0.72			$	0.75

See Notes to the Condensed Consolidated Financial Statements

 

4

---

Table of Contents

CHICAGO RIVET & MACHINE CO.

Condensed Consolidated Statements of Retained Earnings

For the Six Months Ended June 30, 2018 and 2017

(Unaudited)

 

		2018				2017
Retained earnings at beginning of period		$	31,196,823			$	30,228,793
Net income			1,410,880				973,277
Cash dividends declared in the period; $.72 per share in 2018 and $.75 in 2017			(695,615	)			(724,599	)
Retained earnings at end of period		$	31,912,088			$	30,477,471

See Notes to the Condensed Consolidated Financial Statements

 

5

---

Table of Contents

CHICAGO RIVET & MACHINE CO.

Condensed Consolidated Statements of Cash Flows

For the Six Months Ended June 30, 2018 and 2017

(Unaudited)

 

		2018				2017
Cash flows from operating activities:
Net income		$	1,410,880			$	973,277
Adjustments to reconcile net income to net cash provided by operating activities:
Depreciation			653,537				613,167
Gain on disposal of equipment			(17,485	)			(1,600	)
Deferred income taxes			(27,000	)			(48,000	)
Changes in operating assets and liabilities:
Accounts receivable			(1,580,776	)			(629,324	)
Inventories			(922,121	)			(458,150	)
Other current assets and prepaid income taxes			111,554				7,372
Accounts payable			779,782				288,102
Accrued wages and salaries			246,972				161,600
Other accrued expenses			137,353				(58,057	)
Unearned revenue and customer deposits			(91,205	)			(34,395	)
Net cash provided by operating activities			701,491				813,992
Cash flows from investing activities:
Capital expenditures			(635,718	)			(796,258	)
Proceeds from the sale of equipment			17,485				1,600
Proceeds from certificates of deposit			1,992,000				3,328,000
Purchases of certificates of deposit			(1,245,000	)			(2,083,000	)
Net cash provided by investing activities			128,767				450,342
Cash flows from financing activities:
Cash dividends paid			(695,615	)			(724,599	)
Net cash used in financing activities			(695,615	)			(724,599	)
Net increase in cash and cash equivalents			134,643				539,735
Cash and cash equivalents at beginning of period			1,152,569				353,475
Cash and cash equivalents at end of period		$	1,287,212			$	893,210
Supplemental schedule of non-cash investing activities:
Capital expenditures in accounts payable		$	—			$	2,900

See Notes to the Condensed Consolidated Financial Statements

 

6

---

Table of Contents

CHICAGO RIVET & MACHINE CO.

NOTES TO THE CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)

1. In the opinion of the Company, the accompanying unaudited interim financial statements contain all adjustments necessary to present fairly the financial position of the Company as of June 30, 2018 (unaudited) and December 31, 2017 (audited) and the results of operations and changes in cash flows for the indicated periods. Certain information and note disclosures normally included in financial statements prepared in accordance with accounting principles generally accepted in the United States of America have been omitted from these unaudited financial statements in accordance with applicable rules. Please refer to the financial statements and notes thereto included in the Company’s Annual Report on Form 10-K for the year ended December 31, 2017.

The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates. The results of operations for the three and six-month period ending June 30, 2018 are not necessarily indicative of the results to be expected for the year.

2. The Company extends credit on the basis of terms that are customary within our markets to various companies doing business primarily in the automotive industry. The Company has a concentration of credit risk primarily within the automotive industry and in the Midwestern United States.

3. The Company is, from time to time, involved in litigation, including environmental claims and contract disputes, in the normal course of business. While it is not possible at this time to establish the ultimate amount of liability with respect to contingent liabilities, including those related to legal proceedings, management is of the opinion that the aggregate amount of any such liabilities, for which provision has not been made, will not have a material adverse effect on the Company’s financial position.

4. Revenue—On January 1, 2018, the Company adopted ASC Topic 606, “Revenue from Contracts with Customers” using the modified retrospective method. The adoption did not result in the recognition of a cumulative adjustment to beginning retained earnings, nor did it have a material impact on the condensed consolidated financial statements. For the Company, the most significant impact of the new standard is the addition of required disclosures within the notes to the financial statements.

The Company operates in the fastener industry and is in the business of manufacturing and selling rivets, cold-formed fasteners and parts, screw machine products, automatic rivet setting machines and parts and tools for such machines. Revenue is recognized when control of the promised goods or services is transferred to our customers, generally upon shipment of goods or completion of services, in an amount that reflects the consideration we expect to receive in exchange for those goods or services. Sales taxes we may collect concurrent with revenue producing activities are excluded from revenue. Revenue is recognized net of certain sales adjustments to arrive at net sales as reported on the statement of income. These adjustments primarily relate to customer returns and allowances. The Company records a liability and reduction in sales for estimated product returns based upon historical experience. If we determine that our obligation under warranty claims is probable and subject to reasonable determination, an estimate of that liability is recorded as an offset against revenue at that time. As of June 30, 2018 and December 31, 2017 reserves for warranty claims were not material. Cash received by the Company prior to shipment is recorded as unearned revenue.

Shipping and handling fees billed to customers are recognized in net sales, and related costs as cost of sales, when incurred.

Sales commissions are expensed when incurred because the amortization period is less than one year. These costs are recorded within selling and administrative expenses in the statement of income.

 

7

---

Table of Contents

The following table presents revenue by segment, further disaggregated by end-market:

 

						Assembly
		Fastener				Equipment				Consolidated
Three Months Ended June 30, 2018:
Automotive			5,845,574				38,842				5,884,416
Non-automotive			3,188,701				719,667				3,908,368
Total			9,034,275				758,509				9,792,784
Three Months Ended June 30, 2017:
Automotive			5,696,401				34,690				5,731,091
Non-automotive			2,400,943				1,303,474				3,704,417
Total			8,097,344				1,338,164				9,435,508
Six Months Ended June 30, 2018:
Automotive			11,913,584				88,905				12,002,489
Non-automotive			6,045,790				1,756,146				7,801,936
Total			17,959,374				1,845,051				19,804,425
Six Months Ended June 30, 2017:
Automotive			11,934,425				81,592				12,016,017
Non-automotive			4,899,107				2,003,711				6,902,818
Total			16,833,532				2,085,303				18,918,835

5. The Company’s effective tax rates were approximately 23.1% and 31.1% for the second quarter of 2018 and 2017, respectively, and 22.7% and 32.5% for the six months ended June 30, 2018 and 2017, respectively. The lower rate in 2018 is due to the enactment of the Tax Cuts and Jobs Act in December 2017 that reduced the maximum federal corporate tax rate from 35% to 21% beginning in 2018. The effective rate was lower than the U.S. federal statutory rate in 2017 primarily due to the Domestic Production Activities Deduction allowed under Internal Revenue Code Section 199.

The Company’s federal income tax returns for the 2014 through 2017 tax years are subject to examination by the Internal Revenue Service (“IRS”). While it may be possible that a reduction could occur with respect to the Company’s unrecognized tax benefits as an outcome of an IRS examination, management does not anticipate any adjustments that would result in a material change to the results of operations or financial condition of the Company. No statutes have been extended on any of the Company’s federal income tax filings. The statute of limitations on the Company’s 2014 through 2017 federal income tax returns will expire on September 15, 2018 through 2021, respectively.

The Company’s state income tax returns for the 2014 through 2017 tax years remain subject to examination by various state authorities with the latest closing period on October 31, 2021. The Company is not currently under examination by any state authority for income tax purposes and no statutes for state income tax filings have been extended.

6. Inventories are stated at the lower of cost or net realizable value, cost being determined by the first-in, first-out method. A summary of inventories is as follows:

 

		June 30, 2018				December 31, 2017
Raw material		$	2,377,560			$	1,812,603
Work-in-process			1,559,978				1,604,867
Finished goods			2,103,683				1,674,630
Inventories, gross			6,041,221				5,092,100
Valuation reserves			(591,000	)			(564,000	)
Inventories, net		$	5,450,221			$	4,528,100

 

8

---

Table of Contents

CHICAGO RIVET & MACHINE CO.

NOTES TO THE CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)

 

6. Segment Information—The Company operates in two business segments as determined by its products. The fastener segment includes rivets, cold-formed fasteners and parts and screw machine products. The assembly equipment segment includes automatic rivet setting machines and parts and tools for such machines. Information by segment is as follows:

 

						Assembly
		Fastener				Equipment				Other				Consolidated
Three Months Ended June 30, 2018:
Net sales		$	9,034,275			$	758,509			$	—			$	9,792,784
Depreciation			292,378				27,298				7,341				327,017
Segment operating profit			1,229,717				249,376				—				1,479,093
Selling and administrative expenses			—				—				(591,640	)			(591,640	)
Interest income			—				—				26,639				26,639
Income before income taxes														$	914,092
Capital expenditures			281,692				—				127,599				409,291
Segment assets:
Accounts receivable, net			6,508,150				399,276				—				6,907,426
Inventories, net			4,399,770				1,050,451				—				5,450,221
Property, plant and equipment, net			10,164,570				1,619,454				755,110				12,539,134
Other assets			—				—				8,680,688				8,680,688
														$	33,577,469
Three Months Ended June 30, 2017:
Net sales		$	8,097,344			$	1,338,164			$	—			$	9,435,508
Depreciation			276,610				24,390				8,970				309,970
Segment operating profit			756,226				525,867				—				1,282,093
Selling and administrative expenses			—				—				(626,772	)			(626,772	)
Interest income			—				—				16,034				16,034
Income before income taxes														$	671,355
Capital expenditures			510,981				110,863				—				621,844
Segment assets:
Accounts receivable, net			5,588,046				364,797				—				5,952,843
Inventories, net			3,990,878				1,004,965				—				4,995,843
Property, plant and equipment, net			10,422,170				1,629,310				585,069				12,636,549
Other assets			—				—				8,179,902				8,179,902
														$31,765,137

 

9

---

Table of Contents

CHICAGO RIVET & MACHINE CO.

NOTES TO THE CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)

 

		Fastener				Assembly Equipment				Other				Consolidated
Six Months Ended June 30, 2018:
Net sales		$	17,959,374			$	1,845,051			$	—			$	19,804,425
Depreciation			584,259				54,596				14,682				653,537
Segment operating profit			2,407,179				633,561				—				3,040,740
Selling and administrative expenses			—				—				(1,268,579	)			(1,268,579	)
Interest income			—				—				53,719				53,719
Income before income taxes														$	1,825,880
Capital expenditures			465,919				31,495				138,304				635,718
Six Months Ended June 30, 2017:
Net sales		$	16,833,532			$	2,085,303			$	—			$	18,918,835
Depreciation			546,447				48,780				17,940				613,167
Segment operating profit			1,947,773				771,487				—				2,719,260
Selling and administrative expenses			—				—				(1,307,700	)			(1,307,700	)
Interest income			—				—				30,717				30,717
Income before income taxes														$	1,442,277
Capital expenditures			685,770				113,388				—				799,158

 

10

---

Table of Contents

CHICAGO RIVET & MACHINE CO.

 

Item 2.

Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Results of Operations

Revenues for the second quarter of 2018 were $9,792,784, an increase of $357,276, or 3.8%, compared to $9,435,508 reported for the second quarter of 2017. For the first half of 2018, net sales totaled $19,804,425 compared to $18,918,835 in the first half of 2017, an increase of $885,590, or 4.7%. Net income for the second quarter of 2018 was $703,092, or $0.73 per share, compared to $462,355, or $0.48 per share, in the second quarter of 2017. Net income for the first half of 2018 was $1,410,880, or $1.46 per share, compared to $973,277, or $1.01 per share, in the first half of 2017.

Fastener segment revenues were $9,034,275 in the second quarter of 2018, an increase of $936,931, or 11.6%, compared to $8,097,344 reported in the second quarter of 2017. For the first six months of 2018, fastener segment revenues were $17,959,374, compared to $16,833,532 in the first half of 2017, an increase of $1,125,842, or 6.7%. The automotive sector is the primary market for our fastener segment products and our current year fastener segment sales have been supported by a 2% increase in U.S. light-vehicle sales. Additionally, we have added a number of non-automotive customers in the past year which has contributed to an increase in such sales of 32.8% and 23.4% in the second quarter and the first six months of 2018, respectively, compared to 2017. Fastener segment gross margins were $2,047,372 in the second quarter of 2018 compared to $1,554,670 in the second quarter of 2017, an increase of $492,702, or 31.7%. For the first half of 2018, gross margins for the segment were $4,024,012 compared to $3,587,484 in the first half of 2017, an increase of $436,528, or 12.2%. The overall improvement in fastener segment margins during the first six months of 2018 was primarily due to the increase in sales in the current year as well as the reduction in certain overhead expenses, most significantly tooling which declined $127,000, which helped offset the impact of higher steel prices.

Assembly equipment segment revenues were $758,509 in the second quarter of 2018 compared to $1,338,164 in the second quarter of 2017, a decline of $579,655, or 43.3%. The large decline in sales during the second quarter, which reversed a first quarter gain, was due to the shipment of certain high dollar value machine orders in the prior year quarter. For the first half of 2018, assembly equipment sales were $1,845,051 compared to $2,085,303 for the first half of 2017, a decline of $240,252, or 11.5%. Lower machine sales was the primary cause of the decline in assembly equipment segment gross margins to $241,062 in the second quarter of 2018 from $514,738 in the second quarter of 2017. For the first half of the year, gross margins were $607,427 compared to $738,435 in 2017, a decline of $131,008.

Selling and administrative expenses for the second quarter of 2018 were $1,411,969, a decline of $8,606, or 0.6%, compared with the year earlier quarter total of $1,420,575. Although sales commissions increased $40,000, due to higher sales, and profit sharing expense increased $36,000, due to the improvement in operating profit, these increases were offset by expenditures for a new ERP system that one of our locations incurred in the second quarter of 2017. For the first six months of 2018, selling and administrative expenses were $2,876,687 compared to $2,926,847 in 2017, a decline of $50,160, or 1.7%. As in the second quarter, expenditures for the first half of 2018 were favorably impacted by the ERP system conversion undertaken at one of our locations last year. This accounted for $150,000 of additional expenses during the first half of 2017, which was only partially offset by increases in sales commissions of $75,000 and profit sharing expense of $54,000 in the current year. Selling and administrative expenses as a percentage of net sales for the first half of 2018 were 14.5% compared to 15.5% in the first half of 2017.

Other Income

Other income in the second quarter of 2018 was $37,627, compared to $22,522 in the second quarter of 2017. Other income for the first half of 2018 was $71,128, compared to $43,205 in the first six months of 2017. The increases were primarily related to greater interest income on certificates of deposit due to higher interest rates and greater average invested balances in the current year.

Income Tax Expense

The Company’s effective tax rates were approximately 23.1% and 31.1% for the second quarter of 2018 and 2017, respectively, and 22.7% and 32.5% for the six months ended June 30, 2018 and 2017, respectively. The lower rates in 2018 are due to the enactment of the Tax Cuts and Jobs Act in December 2017 that reduced the maximum federal corporate tax rate from 35% to 21% beginning in 2018. The new tax law had the estimated impact of reducing income tax expense by $92,000 and $193,000 during the second quarter and first half of 2018, respectively. The 2017 rates were lower than the U.S. federal statutory rate primarily due to the Domestic Production Activities Deduction allowed under Internal Revenue Code Section 199.

 

11

---

Table of Contents

Liquidity and Capital Resources

Working capital at June 30, 2018 was $17.7 million, an increase of $0.7 million from the beginning of the year. The largest component of the net increase in working capital in the first half of 2018 was accounts receivable which increased $1.6 million since the beginning of the year due to the greater sales during the second quarter compared to the seasonally lower fourth quarter of 2017. Raw material purchases were accelerated during the second quarter in an effort to avoid tariff charges which contributed to a $0.9 million increase in inventory and a $0.8 million increase in accounts payable. Capital expenditures for the first half of 2018 were $0.6 million, which primarily consisted of equipment used in production activities. Dividends paid in the first two quarters were $0.7 million, including two regular quarterly payments of $0.21 per share and an extra dividend of $0.30 per share paid in the first quarter. The net result of these changes and other cash flow activity was to leave cash, cash equivalents and certificates of deposit at $8.4 million as of June 30, 2018 compared to $9.0 million at the beginning of the year.

Results of Operations Summary

We are pleased to report improvement in both sales and net income in the second quarter and the first half of 2018 compared to the year earlier periods. Demand for our fastener segment products has benefited from an increase in domestic automotive sales and the addition of new non-automotive customers in the past year. However, we have experienced increases in steel prices, our primary raw material, in recent months that have negatively impacted our gross margins and remain a concern as further increases are expected. The near-term outlook for our assembly equipment segment is positive due to a machine order backlog that exceeds that of a year ago. Our results will continue to be impacted by higher prices for raw materials and the disruption that sourcing changes may bring, however, we will continue to make adjustments to our activities which we feel are necessary based on changing conditions in our markets while maintaining an emphasis on quality and reliability of service our customers demand.

Forward-Looking Statements

This discussion contains certain “forward-looking statements” which are inherently subject to risks and uncertainties that may cause actual events to differ materially from those discussed herein. Factors which may cause such differences in events include, those disclosed under “Risk Factors” in our Annual Report on Form 10-K and in the other filings we make with the United States Securities and Exchange Commission.    These factors, include among other things: conditions in the domestic automotive industry, upon which we rely for sales revenue, the intense competition in our markets, the concentration of our sales with a major customer, risks related to export sales, the price and availability of raw materials, labor relations issues, losses related to product liability, warranty and recall claims, costs relating to environmental laws and regulations, the loss of the services of our key employees and difficulties in achieving expected cost savings. Many of these factors are beyond our ability to control or predict. Readers are cautioned not to place undue reliance on these forward-looking statements. We undertake no obligation to publish revised forward-looking statements to reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events.

 

12

---

Table of Contents

CHICAGO RIVET & MACHINE CO.

 

Item 4.

Controls and Procedures.

(a) Disclosure Controls and Procedures. The Company’s management, with the participation of the Company’s Chief Executive Officer and President, Chief Operating Officer and Treasurer (the Company’s principal financial officer), has evaluated the effectiveness of the Company’s disclosure controls and procedures (as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”)) as of the end of the period covered by this report. Based on such evaluation, the Company’s Chief Executive Officer and President, Chief Operating Officer and Treasurer have concluded that, as of the end of such period, the Company’s disclosure controls and procedures are effective in recording, processing, summarizing and reporting, on a timely basis, information required to be disclosed by the Company in the reports that it files or submits under the Exchange Act.

(b) Internal Control Over Financial Reporting. There have not been any changes in the Company’s internal control over financial reporting (as such term is defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) during the fiscal quarter to which this report relates that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

 

13

---

Table of Contents

PART II — OTHER INFORMATION

 

Item 6.

Exhibits

 

 

14

---

Table of Contents

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

						CHICAGO RIVET & MACHINE CO.
						(Registrant)
Date: August 9, 2018
						/s/ John A. Morrissey
						John A. Morrissey
						Chairman of the Board of Directors and Chief Executive Officer (Principal Executive Officer)
Date: August 9, 2018
						/s/ Michael J. Bourg
						Michael J. Bourg
						President, Chief Operating Officer and Treasurer (Principal Financial Officer)

 

15