UNITED STATES SECURITIES AND EXCHANGE COMMISSION

FORM 10-K

/X/ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the Fiscal Year Ended September 30, 2004

Commission File Number 1-5097

JOHNSON CONTROLS, INC.
(Exact name of registrant as specified in its charter)

Registrant’s telephone number, including area code: (414) 524-1200

Securities Registered Pursuant to Section 12(b) of the Act:

Securities Registered Pursuant to Section 12(g) of the Act: None

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.
Yes /X/          No /   /

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. /X/

Indicate by check mark whether the registrant is an accelerated filer (as defined in Rule 12b-2 of the Act). Yes /X/ No /   /

The aggregate market value of the registrant’s stock held by non-affiliates of the registrant on March 31, 2004 was approximately $11,240,000,000.

190,346,186 shares of the registrant’s Common Stock, par value $0.04 1/6 per share, were outstanding on October 31, 2004.

DOCUMENTS INCORPORATED BY REFERENCE

Parts I, II and IV incorporate by reference portions of the Annual Report to Shareholders for the year ended September 30, 2004.

Part III incorporates by reference portions of the Proxy Statement dated and to be filed with the Securities and Exchange Commission on December 3, 2004.

JOHNSON CONTROLS, INC.

Index to Annual Report on Form 10-K

Year Ended September 30, 2004

2

JOHNSON CONTROLS, INC.

Index to Annual Report on Form 10-K

Year Ended September 30, 2004

3

CAUTIONARY STATEMENTS FOR FORWARD-LOOKING INFORMATION

Johnson Controls, Inc. (“the Company”) has made forward-looking statements in this document pertaining to its financial results for fiscal 2005 and future years that are based on preliminary data and are subject to risks and uncertainties. Forward-looking statements include information concerning possible or assumed future risks and may include words such as “believes,” “forecasts,” “expects,” “outlook” or similar expressions. For those statements, the Company cautions that numerous important factors, such as automotive vehicle production levels and schedules, the strength of the U.S. or other economies, currency exchange rates, cancellation of commercial contracts, as well as those factors discussed in the Company’s Form 8-K filing (dated October 26, 2004), could affect the Company’s actual results and could cause its actual consolidated results to differ materially from those expressed in any forward-looking statement made by, or on behalf of, the Company.

PART I

ITEM 1          BUSINESS

General Development of Business

Johnson Controls, Inc. is a Wisconsin corporation organized in 1885. Its principal office is located at 5757 North Green Bay Avenue, P.O. Box 591, Milwaukee, Wisconsin 53201. From 1885 through 1978, the Company’s operations were predominantly in the controls business. Since 1978, the Company’s operations have been diversified through acquisitions and internal growth. It currently conducts business in two operating segments, controls (Controls Group) and automotive (Automotive Group).

The Controls Group is a global market leader in providing installed building control systems and technical and facility management services, including comfort, energy and security management for the non-residential buildings market. The segment’s installed systems integrate the management, operation and control of building control systems such as temperature, ventilation, humidity, fire safety and security. The segment’s technical and facility management services provide a complete suite of integrated solutions to improve building operations and maintenance.

In 1978, the Company entered the North American battery market through the acquisition of Globe-Union, Inc. and grew in this market through internal growth. In 1985, the Company entered the automotive seating market through the acquisition of Hoover Universal. During the late 1990’s, the Company expanded into additional interior systems and geographic markets. Today, the Automotive Group is among the world’s largest automotive suppliers. The segment provides seating, instrument panel, overhead, floor console and door systems, including electronics, and batteries for more than 35 million vehicles annually.

Financial Information About Business Segments

Note 20, “Segment information,” of the Notes to the Consolidated Financial Statements on pages 48 and 49 of the 2004 Annual Report to Shareholders is incorporated herein by reference.

4

Products/Systems and Services

Automotive Group

The Automotive Group designs and manufactures products and systems for passenger cars and light trucks, including vans, pick-up trucks and sport/crossover utility vehicles. The segment produces automotive interior systems for original equipment manufacturers and automotive batteries for the replacement and original equipment markets. It operates approximately 210 wholly- and majority-owned manufacturing or assembly plants in 31 countries worldwide (see Item 2 “Properties”). Additionally, the Group has partially-owned affiliates in Asia, Europe, North America and South America.

Automotive interior systems products include complete seating systems and components; cockpit systems, including instrument clusters, information displays and body controllers; overhead systems, including headliners and electronic convenience features; floor consoles; door systems, and engine electronics. Interior systems sales accounted for approximately 89 percent of total fiscal 2004 segment sales.

The segment operates assembly plants that supply automotive manufacturers with complete seats on a “just-in-time/in-sequence” basis. Seats are assembled to specific order and delivered on a predetermined schedule directly to an automotive assembly line. Certain of the segment’s other automotive interior systems are also supplied on a just-in-time/in-sequence basis. Foam and metal seating components, seat covers, seat mechanisms and other components are shipped to these plants from the segment’s production facilities or outside suppliers.

In the last eight years, the segment has substantially grown its interior systems capabilities, principally through internal growth aided by acquisitions. In fiscal 2002, the segment expanded its capabilities in vehicle electronics with its acquisition of the automotive electronics business of France-based Sagem SA. In fiscal 2003, the Company acquired Borg Instruments AG, an automotive electronics company with headquarters in Germany.

Sales of automotive batteries generated 11 percent of the segment’s fiscal 2004 sales. Johnson Controls is the world’s leading manufacturer of lead-acid automotive batteries. In fiscal 2002, the segment expanded its battery operations into the European market through the acquisition of the German automotive battery manufacturer Hoppecke Automotive GmbH and Co. KG. In fiscal 2003, the Company continued its expansion into the European market with its acquisition of VARTA Automotive GmbH and the 80 percent majority ownership in VB Autobatterie GmbH, a major European automotive battery manufacturer headquartered in Germany. Most recently, in fiscal 2004, the Company acquired the remaining 51 percent interest in its Mexican joint venture with Grupo IMSA, S.A. de C. V. The acquisition supports the Company’s growth strategies and provides new opportunities to strengthen the Company’s global leadership position in the automotive battery industry. Batteries and plastic battery containers are manufactured at wholly owned plants in North America, South America and Europe and via a partially-owned affiliate at a plant in India (see Item 2 “Properties”).

5

Controls Group

The Controls Group is a major worldwide supplier of installed control systems and technical and facility management services which improve the comfort, fire-safety, security, productivity, energy efficiency, and cost-effectiveness of non-residential buildings. The Company provides control systems that monitor, automate and integrate critical building operating equipment and conditions. These systems are customized to address each building’s unique design and use. The Controls Group provides a broad range of technical and facility management services that supplement or function as in-house building staff. Technical services includes the operation, scheduled maintenance and repair of building equipment such as control systems, chillers and boilers. Facility management services provides on-site staff for complete facility operations and management.

The segment sells directly to building owners as well as contractors. It employs sales, engineering and service personnel working out of approximately 290 branch offices located in approximately 45 countries throughout the world. Controls Group employees also work full-time at numerous customer sites.

The Controls Group also sells its control systems and products to original equipment manufacturers, wholesalers and distributors of air-conditioning and refrigeration systems, commercial and residential heating systems, and water-pumping equipment. Controls Group installed systems are manufactured throughout the world (see Item 2 “Properties”). The segment also has partially-owned affiliates in Asia, Europe, North America and South America.

Worldwide, approximately 40 percent of the Controls Group’s sales are derived from installed control systems and approximately 60 percent originate from its service offerings. Also, approximately 35 percent of segment revenues are derived from the new construction market while 65 percent are derived from the existing buildings market.

Major Customers and Competition

As described previously, the Company is a major supplier to the automotive industry. Sales to its major customers, as a percentage of consolidated net sales, were as follows for the most recent three-year period:

Approximately 49 percent of Automotive Group sales over the last three years were to the three automobile manufacturers listed above. In fiscal 2004, approximately 49 percent of the Company’s total sales to these manufacturers originated in the United States, 36 percent were based in Europe and 15 percent were attributable to other foreign markets. Because of the importance of new vehicle sales of major automotive manufacturers to its operations, the Company is affected by general business conditions in this industry. Sales to additional

6

automakers that accounted for more than five percent of Company sales included Nissan Motor Co., Ltd., Toyota Motor Corporation and Volkswagen AG.

Automotive Group

The Automotive Group faces competition from other automotive parts suppliers and, with respect to certain products, from the automobile manufacturers who produce or have the capability to produce certain products the segment supplies. Competition is based on technology, quality, reliability of delivery and price. Design, engineering and product planning are increasingly important factors. Independent suppliers that represent the principal interior systems competitors include Lear Corporation, Faurecia, Intier Automotive, Delphi Corporation and Visteon Corporation. The segment primarily competes in the battery market with Exide Technologies, Delphi Corporation, Fiamm and East Penn Manufacturing Company.

Approximately 81 percent of automotive battery sales worldwide in fiscal 2004 were to the automotive replacement market, with the remaining sales to the original equipment market. The segment is the principal supplier of batteries to many of the largest merchants in the battery aftermarket, including Advance Auto Parts, AutoZone, Bosch Group, Costco, Interstate Battery System of America, Pep Boys and Sears, Roebuck & Co. It is also a major supplier of automotive batteries to Wal-Mart Stores. Automotive batteries are sold throughout the world under private label and under the Company’s brand names Optima®, Varta®, LTH® and Heliar® to automotive replacement battery retailers and distributors and to automobile manufacturers as original equipment. Approximately 62 percent of total automotive battery sales in fiscal 2004 were based in the United States while 38 percent were attributable to the European market.

Controls Group

The Controls Group conducts its operations through thousands of individual contracts that are either negotiated or awarded on a competitive basis. Key factors in the award of installation contracts include system and service quality, price, reputation, technology, application engineering capability and construction management expertise. Competition for contracts includes many regional, national and international controls providers; larger competitors in the control systems market include Honeywell International and Siemens Building Technologies (of Siemens AG). The services market is highly fragmented, with no one company being dominant. Sales of these services are largely dependent upon numerous individual contracts with commercial businesses worldwide and various departments and agencies of the U.S. Federal government. The loss of any individual contract would not have a materially adverse effect on the Company.

Backlog

At September 30, 2004, the Company’s Automotive Group had an incremental backlog of new orders for its interior systems, net of discontinued programs, to be executed within the next fiscal year of approximately $2.3 billion, which includes orders of approximately $0.1 billion associated with unconsolidated joint ventures. The backlog one year ago was approximately $1.9 billion. The automotive backlog is generally subject to a number of risks and uncertainties, such as related vehicle production volumes and the timing of related production launches.

7

The Company’s backlog relating to the Controls Group is applicable to its sales of installed systems and technical service activity, accounted for using the percentage-of-completion method. In accordance with customary industry practice, customers are progress billed on an estimated basis as work proceeds. At September 30, 2004, the unearned backlog of installed systems contracts to be executed within the next fiscal year was $1.84 billion, compared with the prior year’s $1.75 billion. The preceding data does not include amounts associated with facility management service contracts because such contracts are typically multi-year service awards. The backlog amount outstanding at any given time is not necessarily indicative of the amount of revenue to be earned in the coming fiscal period.

Raw Materials

Raw materials used by the Automotive Group in connection with its automotive interior systems and battery operations, including steel, urethane chemicals, lead, sulfuric acid and polypropylene, were readily available during the year and such availability is expected to continue. Although the raw materials are expected to continue to be readily available, costs of certain commodities, such as steel and lead, are expected to rise significantly in the upcoming fiscal year. The Controls Group is not dependent upon any single source of supply for essential materials, parts or components.

Intellectual Property

Generally, the Company seeks statutory protection for strategic or financially important intellectual property developed in connection with its business. Certain intellectual property, where appropriate, is protected by contracts, licenses, confidentiality or other agreements.

The Company owns numerous U.S. and foreign patents (and their respective counterparts), the more important of which cover those technologies and inventions embodied in current products, or which are used in the manufacture of those products. While the Company believes patents are important to its business operations and in the aggregate constitute a valuable asset, no single patent, or group of patents, is critical to the success of the business. The Company, from time to time, grants licenses under its patents and technology and receives licenses under patents and technology of others.

The Company has numerous registered trademarks in the United States and in many foreign countries. The most important of these marks are “JOHNSON CONTROLS” (including a stylized version thereof), “JCI” and “JOHNSON. “ These marks are universally used in connection with certain of its product lines and services. The trademarks and service marks “PENN, “ “METASYS, “ “CARDKEY,” “HOMELINK,” “AUTOVISION,” “TRAVELNOTE,” “BLUECONNECT,” “RAILPORT,” “OPTIMA,” “VARTA,” “LTH,” “HELIAR,” “INSPIRA” and others are used in connection with certain Company product lines and services. The Company also markets automotive batteries under the licensed trademarks “EVEREADY” and “ENERGIZER.”

Most works of authorship produced for the Company, such as computer programs, catalogs and sales literature, carry appropriate notices indicating the Company’s claim to copyright protection under U.S. law and appropriate international treaties.

8

Environmental, Health and Safety Matters

Laws addressing the protection of the environment (Environmental Laws) and workers’ safety and health (Worker Safety Laws) govern the Company’s ongoing global operations. They generally provide for civil and criminal penalties, as well as injunctive and remedial relief, for noncompliance or require remediation of sites where Company-related materials have been released into the environment.

The Company has expended substantial resources globally, both financial and managerial, to comply with Environmental Laws and Worker Safety Laws and maintains procedures designed to foster and ensure compliance. Certain of the Company’s businesses are or have been engaged in the handling or use of substances that may impact workplace health and safety or the environment. The Company is committed to protecting its workers and the environment against the risks associated with these substances.

The Company’s operations and facilities have been, and in the future may become, the subject of formal or informal enforcement actions or proceedings for noncompliance with such laws or for the remediation of Company-related substances released into the environment. Such matters typically are resolved by negotiation with regulatory authorities that result in commitments to compliance, abatement, or remediation programs and, in some cases, payment of penalties. Historically, neither such commitments nor such penalties have been material. (See Item 3 “Legal Proceedings” of this report for a discussion of the Company’s potential environmental liabilities.)

Environmental Capital Expenditures

The Company’s ongoing environmental compliance program often results in capital expenditures. Environmental considerations are a part of all significant capital expenditures; however, expenditures in 2004 related solely to environmental compliance were not material. It is management’s opinion that the amount of any future capital expenditures related solely to environmental compliance will not have a material adverse effect on the Company’s financial results or competitive position in any one year.

Employees

As of September 30, 2004, the Company employed approximately 123,000 employees, of whom approximately 79,000 were hourly and 44,000 were salaried.

Seasonal Factors

Sales of automotive interior systems and batteries to automobile manufacturers for use as original equipment are dependent upon the demand for new automobiles. Management believes that demand for new automobiles generally reflects sensitivity to overall economic conditions with no material seasonal effect. The automotive replacement battery market is affected by weather patterns because batteries are more likely to fail when extremely low temperatures place substantial additional power requirements upon a vehicle’s electrical system. Also, battery life is shortened by extremely high temperatures, which accelerate corrosion rates. Therefore, either

9

mild winter or moderate summer temperatures may adversely affect automotive replacement battery sales.

The Controls Group’s activities are executed on a relatively continuous basis, with no significant fluctuation in revenues during the year.

Financial Information About Geographic Areas

Note 20, “Segment information,” of the Notes to the Consolidated Financial Statements on pages 48 and 49 of the 2004 Annual Report to Shareholders is incorporated herein by reference.

Research and Development Expenditures

Note 15, “Research and development,” of the Notes to the Consolidated Financial Statements on page 46 of the 2004 Annual Report to Shareholders is incorporated herein by reference.

Available Information

The Company’s filings with the Securities and Exchange Commission (SEC), including annual reports on Form 10-K, quarterly reports on Form 10-Q, definitive proxy statements on Form 14a, current reports on Form 8-K, and any amendments to those reports filed pursuant to Section 13 or 15(d) of the Exchange Act, are made available free of charge through the Investor Relations section of the Company’s Internet website at http://www.johnsoncontrols.com as soon as reasonably practicable after the Company electronically files such material with, or furnishes it to, the SEC. Copies of any materials the Company files with the SEC can also be obtained free of charge through the SEC’s website at http://www.sec.gov, at the SEC’s Public Reference Room at 450 Fifth St., N.W., Washington, D.C. 20549, or by calling the SEC’s Public Reference Room at 1-800-732-0330. The Company also makes available, free of charge, its Ethics Policy, Corporate Governance Guidelines, committee charters and other information related to the Company on the Company’s Internet website or in printed form upon request.

ITEM 2          PROPERTIES

At September 30, 2004, the Company conducted its operations in 34 countries throughout the world, with its world headquarters located in Milwaukee, Wisconsin. The Company’s wholly- and majority-owned facilities, which are listed in the table on the following pages by segment and location, totaled approximately 78 million square feet of floor space and are owned by the Company except as noted. The facilities primarily consisted of manufacturing, assembly and/or warehouse space, except where noted that the facility has administrative space. The Company considers its facilities to be suitable and adequate. The majority of the facilities are operating at normal levels based on capacity.

In addition, approximately 290 Controls Group branch offices, located in major cities throughout the world, are either owned or leased. These offices vary in size in proportion to the volume of business in the particular locality.

10

Johnson Controls, Inc.
Properties at September 30, 2004

11

12

13

ITEM 3          LEGAL PROCEEDINGS

Environmental Litigation and Proceedings and Other Matters

As noted previously, liabilities potentially arise globally under various Environmental Laws and Worker Safety Laws for activities that are not in compliance with such laws and for the cleanup of sites where Company-related substances have been released into the environment.

Currently, the Company is responding to allegations that it is responsible for performing environmental remediation, or for the repayment of costs spent by governmental entities or others performing remediation, at approximately 50 sites in the United States. Many of these sites are landfills used by the Company in the past for the disposal of waste materials; others are secondary lead smelters and lead recycling sites where the Company returned lead-containing materials for recycling; a few involve the cleanup of Company manufacturing facilities; and the remaining fall into miscellaneous categories. The Company may face similar claims of liability at additional sites in the future. Where potential liabilities are alleged, the Company pursues a course of action intended to mitigate them.

The Company accrues for potential environmental losses consistent with generally accepted accounting principles; that is, when it is probable a loss has been incurred and the amount of the loss is reasonably estimable. Its reserves for environmental costs totaled $61 million and $62 million at September 30, 2004 and 2003, respectively. The Company reviews the status of the sites on a quarterly basis and adjusts its reserves accordingly. Such potential liabilities accrued by the Company do not take into consideration possible recoveries of future insurance proceeds. They do, however, take into account the likely share other parties will bear at remediation sites. It is difficult to estimate the Company’s ultimate level of liability at many remediation sites due to the large number of other parties that may be involved, the complexity of determining the relative liability among those parties, the uncertainty as to the nature and scope of the investigations and remediation to be conducted, the uncertainty in the application of law and risk assessment, the various choices and costs associated with diverse technologies that may be used in corrective actions at the sites, and the often quite lengthy periods over which eventual remediation may occur. Nevertheless, the Company has no reason to believe at the present time that any claims, penalties or costs in connection with known environmental matters will have a material adverse effect on the Company’s financial position, results of operations or cash flows.

Typically, site remediation matters are addressed at the administrative agency level of the government. Occasionally, however, litigation is involved. The most significant of such matters where litigation has been commenced by the government or by private parties and remains pending against the Company is the following:

United States v. NL Industries, Inc., Case No. 91-CV-00578-WDS (United States District Court for the Southern District of Illinois), filed July 31, 1991. The EPA sought to enforce an administrative order issued on November 27, 1990 against Johnson Controls and other defendants requiring performance of a cleanup at a secondary smelter facility in Granite City, Illinois. The Company executed a consent decree in 1999 settling the matter, which the court entered in 2003. Most of the work and payments required by the consent decree have been completed or made, and accrued liabilities relating to environmental matters include an amount attributable to the remaining costs.

14

Additionally, the Company is involved in a number of product liability and various other suits incident to the operation of its businesses. Insurance coverages are maintained and estimated costs are recorded for claims and suits of this nature. It is management’s opinion that none of these will have a materially adverse effect on the Company’s financial position, results of operations or cash flows.

In 1989, Johnson Controls initiated an action in the Milwaukee County, Wisconsin Circuit Court, Johnson Controls, Inc. v. Employers Insurance of Wausau, which sought reimbursement under comprehensive general liability insurance policies dating from 1954 through 1985 for costs relating to certain environmental matters. In 1995, the Circuit Court dismissed the action based on the Wisconsin Supreme Court’s decision in City of Edgerton v. General Casualty Co. of Wisconsin. The Company twice appealed the case to the Court of Appeals and then petitioned the Wisconsin Supreme Court to review the lower courts’ judgments. The Supreme Court granted the petition and on July 11, 2003 overruled its decision in the Edgerton case and found that the comprehensive general liability insurance policies may provide coverage for environmental damages, subject to other available defenses. The Supreme Court’s decision remands the case to the Circuit Court for further consideration, where the merits of Johnson Controls’ various environmental claims will be determined.

ITEM 4          SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

No matters were submitted to a vote of security holders during the fourth quarter of the fiscal year covered by this report.

EXECUTIVE OFFICERS OF THE REGISTRANT

Pursuant to General Instruction G(3) of Form 10-K, the following list is included as an unnumbered Item in Part I of this report in lieu of being included in the Company’s fiscal year 2004 Proxy Statement.

15

16

There are no family relationships, as defined by the instructions to this item, between the above executive officers.

17

All officers are elected for terms that expire on the date of the meeting of the Board of Directors following the Annual Meeting of Shareholders or until their successors are elected and qualified.

PART II

The information required by Part II, Items 5, 6, 7, 7A and 8, are incorporated herein by reference to the Company’s 2004 Annual Report to Shareholders as follows:

On November 19, 2003, the Company’s Board of Directors declared a two-for-one stock split of the common stock payable January 2, 2004 to shareholders of record on December 12, 2003. This stock split resulted in the issuance of approximately 90.5 million additional shares of common stock and was accounted for by the transfer of approximately $7.5 million from common stock to capital in excess of par value. All share or per share data in this Form 10-K have been restated to reflect the two-for-one stock split.

The Company has entered into an Equity Swap Agreement, dated as of March 18, 2004 (the “Swap Agreement”), with Citibank, N.A. (“Citibank”). Citibank has advised the Company that in connection with the Swap Agreement it has purchased shares of the Company’s stock in the market or in privately negotiated transactions. The Company disclaims that Citibank is an “affiliated purchaser” of the Company as such term is defined in Rule 10b-18(a)(3) under the Securities Exchange Act or that Citibank is purchasing any shares on behalf of the Company. The expiration date of the Swap Agreement is not currently determinable. There were no purchases by the Company or by Citibank in the quarter ended September 30, 2004.

18

ITEM 9A          CONTROLS AND PROCEDURES

As of the end of the period covered by this report, the Company’s management, including the Chief Executive Officer and Chief Financial Officer, conducted an evaluation of the effectiveness of disclosure controls and procedures. Based upon that evaluation, the Chief Executive Officer and the Chief Financial Officer concluded that such disclosure controls and procedures were effective in alerting them on a timely basis to material information relating to the Company required to be included in the Company’s reports filed under the Exchange Act.

There have been no significant changes in the Company’s internal controls over financial reporting, or in factors that could significantly affect internal controls over financial reporting, subsequent to the date of the evaluation.

ITEM 9B          OTHER INFORMATION

None.

PART III

The information required by Part III, Items 10, 11, 12 and 14, are incorporated herein by reference to the Company’s Proxy Statement for its 2005 Annual Meeting of Shareholders (fiscal year 2004 Proxy Statement), dated and to be filed with the SEC on December 3, 2004, as follows:

19

PART IV

ITEM 15          EXHIBITS AND FINANCIAL STATEMENT SCHEDULE

*Incorporated by reference from the indicated pages of the 2004 Annual Report to Shareholders.

All other schedules are omitted because they are not applicable, or the required information is shown in the financial statements or notes thereto.

Financial statements of 50 percent or less-owned companies have been omitted because the proportionate share of their profit before income taxes and total assets are less than 20 percent of the respective consolidated amounts, and investments in such companies are less than 20 percent of consolidated total assets.

20

Other Matters

For the purposes of complying with the amendments to the rules governing Form S-8 under the Securities Act of 1933, the undersigned registrant hereby undertakes as follows, which undertaking shall be incorporated by reference into registrant’s Registration Statements on Form S-8 Nos. 33-30309, 33-31271, 33-58092, 33-58094, 33-49862, 333-10707, 333-36311, 333-66073, 333-41564, and 333-117898.

Insofar as indemnification for liabilities arising under the Securities Act of 1933 may be permitted to directors, officers and controlling persons of the registrant pursuant to the foregoing provisions, or otherwise, the registrant has been advised that in the opinion of the SEC such indemnification is against public policy as expressed in the Securities Act of 1933 and is, therefore, unenforceable. In the event that a claim for indemnification against such liabilities (other than the payment by the registrant of expenses incurred or paid by a director, officer or controlling person of the registrant in the successful defense of any action, suit or proceeding) is asserted by such director, officer or controlling person in connection with the securities being registered, the registrant will, unless in the opinion of its counsel the matter has been settled by controlling precedent, submit to a court of appropriate jurisdiction the question whether such indemnification by it is against public policy as expressed in the Act and will be governed by the final adjudication of such issue.

21

Report of Independent Registered Public Accounting Firm on
Financial Statement Schedule

To the Board of Directors
of Johnson Controls, Inc.

Our audits of the consolidated financial statements referred to in our report dated November 12, 2004 appearing in the 2004 Annual Report to Shareholders of Johnson Controls, Inc. (which report and consolidated financial statements are incorporated by reference in this Annual Report on Form 10-K) also included an audit of the financial statement schedule listed in Item 15(a)(2) of this Form 10-K. In our opinion, this financial statement schedule presents fairly, in all material respects, the information set forth therein when read in conjunction with the related consolidated financial statements.

/s/ PricewaterhouseCoopers LLP
PricewaterhouseCoopers LLP
Milwaukee, Wisconsin
November 12, 2004

22

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Date: November 30, 2004

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below as of November 30, 2004, by the following persons on behalf of the registrant and in the capacities indicated:

23

JOHNSON CONTROLS, INC. AND SUBSIDIARIES

SCHEDULE II — VALUATION AND QUALIFYING ACCOUNTS
(in millions)

24

JOHNSON CONTROLS, INC.
INDEX TO EXHIBITS

25

JOHNSON CONTROLS, INC.
INDEX TO EXHIBITS

26

JOHNSON CONTROLS, INC.
INDEX TO EXHIBITS

27

JOHNSON CONTROLS, INC.
INDEX TO EXHIBITS

*These instruments are not being filed as exhibits herewith because none of the long-term debt instruments authorizes the issuance of debt in excess of ten percent of the total assets of Johnson Controls, Inc. and its subsidiaries on a consolidated basis. Johnson Controls, Inc. agrees to furnish a copy of each such agreement to the Securities and Exchange Commission upon request.

28