Kaltra Introduces New Downward-Spraying Distribution Technology to Boost Microchannel Evaporator Performance
By:
PRLog
February 27, 2026 at 13:30 PM EST
The Challenge: Uneven Refrigerant Flow
In microchannel evaporators, cooling efficiency depends on how evenly refrigerant is distributed across dozens of parallel microchannels. When the refrigerant enters the inlet header in a two-phase state (liquid and vapor), the heavier liquid naturally settles at the bottom while the lighter vapor rises to the top.
This separation causes uneven feeding of the microchannels: some channels receive mostly vapor, others too much liquid. The result is reduced heat transfer efficiency, unstable operation, and significant performance losses.
In practical terms:
- Evaporators without any internal distributor can lose 25–35% of performance due to severe maldistribution.
- Systems equipped with conventional lateral-spraying distributors typically reduce losses, but still experience 10–15% performance degradation.
The Solution: Downward-Spraying Distributor (DSD)
To address this issue, Kaltra developed a new Downward-Spraying Distributor (DSD) architecture.
Instead of injecting refrigerant sideways inside the header — as in traditional designs — the DSD injects refrigerant vertically downward through precisely calibrated openings. This seemingly simple change produces a powerful effect:
- The downward spray works with gravity rather than against it.
- Liquid refrigerant is actively directed toward the lower region of the header.
- High-velocity jets create turbulence and fine mixing.
- Liquid and vapor phases are blended more evenly before entering the microchannels.
By mechanically disrupting natural phase separation, the DSD ensures that each microchannel receives a more consistent liquid–vapor mixture.
Near-Ideal Performance Achieved
Testing confirmed that evaporators equipped with Kaltra's DSD technology demonstrate performance losses as low as 1–3%, approaching ideal distribution conditions.
The system also maintains high distribution uniformity:
- At coil inclination angles up to 30°
- At inlet vapor qualities below 0.4
- Under realistic operating and installation conditions
Compared to conventional designs, the DSD concept represents a major improvement in evaporator stability, efficiency, and surface utilization.
Raising the Standard for Microchannel Technology
By solving one of the fundamental challenges of two-phase refrigerant flow inside horizontal headers, Kaltra's new distributor technology sets a new benchmark for microchannel heat exchanger performance.
The development reinforces Kaltra's commitment to advancing thermal management solutions through practical engineering innovation and measurable performance gains.
Photos: (Click photo to enlarge)
Source: Kaltra GmbH
Read Full Story - Kaltra Introduces New Downward-Spraying Distribution Technology to Boost Microchannel Evaporator Performance | More news from this source
Press release distribution by PRLog
More News
View More
AeroVironment Touches Down On Value Opportunity ↗
Today 12:45 EDT
Via MarketBeat
Tickers
AVAV
Huntington Bancshares Is Chasing a Bigger Growth Story ↗
Today 11:28 EDT
Via MarketBeat
Tickers
HBAN
3 ETFs to Avoid as Oil Shock Hits Markets ↗
Today 10:24 EDT
The Trade Desk: Follow the CEO, Not the Downgrade ↗
Today 8:07 EDT
Via MarketBeat
Tickers
TTD
Recent Quotes
View More
Stock Quote API & Stock News API supplied by www.cloudquote.io
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the Privacy Policy and Terms Of Service.
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the Privacy Policy and Terms Of Service.
© 2025 FinancialContent. All rights reserved.
>