Fortuna intersects 1,299 g/t Ag Eq over a true width of 9.9 meters at the San Jose Mine, Mexico

VANCOUVER, British Columbia, Sept. 05, 2023 (GLOBE NEWSWIRE) -- Fortuna Silver Mines Inc. (NYSE: FSM) (TSX: FVI) is pleased to announce the discovery of the Yessi vein, a new blind mineralized structure, at the San Jose Mine in Mexico.

Paul Weedon, Senior Vice President of Exploration, commented, “Drilling by the mine geology team recognized a new blind zone of alteration and brecciation, resulting in the intersection of 1,299 g/t Ag Eq over 9.9 meters in drill hole SJOM-1387, and 621 g/t Ag Eq over 5 meters in drill hole SJOM-1391. This new zone has been named the Yessi vein.” Mr. Weedon continued, “Extension drilling intersected the Yessi vein approximately 200 meters further east of the Victoria Mineralized Zone, highlighting the potential size and strength of San Jose´s mineralized system.” Mr. Weedon added, “Drilling continues with additional holes planned along strike to the north and south to further define the extent of Yessi´s mineralization.”   

Yessi vein drilling highlights include:

  • SJOM1387: 1,299 g/t Ag Eq over an estimated true width of 9.9 meters      
  • SJOM1391:     621 g/t Ag Eq over an estimated true width of 5.0 meters     
  • SJOM1396:     483 g/t Ag Eq over an estimated true width of 0.7 meters      

Three drill holes totaling 1,118 meters were completed from an underground platform after infill drilling on the Victoria Mineralized Zone intersected alteration and brecciation towards the original planned depth in drill hole SJOM-1387. The resulting 200-meter extension returned intervals of up to 90 meters of brecciation, alteration, and zones of mineralization (refer to Figure 1). These holes support the interpretation of the Yessi vein, which represents the easternmost limit of mineralization intersected at San Jose to date and which does not have any surface expression, highlighting the regional prospectivity.  

A review of the geochemical signature of the Yessi vein indicates a potentially different phase of mineralization with respect to the other San Jose mineralized structures, containing a higher gold to silver ratio and low levels of base metals. Further work is planned to better understand the relationship between the Yessi vein and the broader mineralized system at the San Jose Mine.

Additional drilling is currently underway to define the strike extent and geometry of the Yessi vein. Mineralization remains open along strike to the north and south, and at depth. Refer to Appendix 1 for details of the Yessi vein drill holes and assay results.

Figure 1: Cross section A - A’ looking north showing recent drilling results.

Cross section A - A’ looking north showing recent drilling results.

Quality Assurance & Quality Control (QA-QC)

Following detailed geological and geotechnical logging, drill core samples are split on-site by diamond sawing. One half of the core is submitted to the internal laboratory located in the CMC facilities. The CMC laboratory has been accredited by the Standard Council of Canada (ISO 17025: 2017) for preparation, drying, gravimetry, fire assay, Inductively Coupled Plasma, and Atomic Absorption processes. The remaining half core is retained on-site for verification and reference purposes. Following preparation, the samples are assayed for gold and silver by standard fire assay methods and for silver and base metals by Inductively Coupled Plasma and as well as three acid digestion at the same internal laboratory. The QA-QC program includes the blind insertion of certified reference standards and assay blanks at a frequency of approximately 1 per 20 normal samples as well as the inclusion of duplicate samples for verification of sampling and assay precision levels.  

Qualified Person

Paul Weedon, Senior Vice President of Exploration for Fortuna Silver Mines Inc., is a Qualified Person as defined by National Instrument 43-101 being a member of the Australian Institute of Geoscientists (Membership #6001). Mr. Weedon has reviewed and approved the scientific and technical information contained in this news release. Mr. Weedon has verified the data disclosed, and the sampling, analytical and test data underlying the information or opinions contained herein by reviewing geochemical and geological databases and reviewing diamond drill core. There were no limitations to the verification process.

About Fortuna Silver Mines Inc.

Fortuna Silver Mines Inc. is a Canadian precious metals mining company with five operating mines in Argentina, Burkina Faso, Cote d’Ivoire, Mexico, and Peru. Sustainability is integral to all our operations and relationships. We produce gold and silver and generate shared value over the long-term for our stakeholders through efficient production, environmental protection, and social responsibility. For more information, please visit our website.

ON BEHALF OF THE BOARD

Jorge A. Ganoza
President, CEO and Director
Fortuna Silver Mines Inc.

Investor Relations:

Carlos Baca | info@fortunasilver.com | www.fortunasilver.com |X| LinkedIn | YouTube

Forward looking Statements

This news release contains forward looking statements which constitute “forward looking information” within the meaning of applicable Canadian securities legislation and “forward looking statements” within the meaning of the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995 (collectively, “Forward looking Statements”). All statements included herein, other than statements of historical fact, are Forward looking Statements and are subject to a variety of known and unknown risks and uncertainties which could cause actual events or results to differ materially from those reflected in the Forward looking Statements. The Forward looking Statements in this news release include, without limitation, statements about the Company’s plans for the Company’s plans for additional drilling to further define the extent of Yessi’s mineralization; statements regarding the potential size and strength of San Jose’s mineralized system; the Company’s business strategy, plans and outlook; the merit of the Company’s mines and mineral properties; mineral resource and reserve estimates; timelines; the future financial or operating performance of the Company; expenditures; approvals and other matters. Often, but not always, these Forward looking Statements can be identified by the use of words such as “estimated”, “potential”, “open”, “future”, “assumed”, “projected”, “used”, “detailed”, “has been”, “gain”, “planned”, “reflecting”, “will”, “containing”, “remaining”, “to be”, or statements that events, “could” or “should” occur or be achieved and similar expressions, including negative variations.

Forward looking Statements involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of the Company to be materially different from any results, performance or achievements expressed or implied by the Forward looking Statements. Such uncertainties and factors include, among others, changes in general economic conditions and financial markets; changes in prices for silver, gold and other metals; the timing and success of the Company’s proposed exploration programs at the San Jose Mine; technological and operational hazards in Fortuna’s mining and mine development activities; risks inherent in mineral exploration; fluctuations in prices for energy, labour, materials, supplies and services; fluctuations in currencies; uncertainties inherent in the estimation of mineral reserves, mineral resources, and metal recoveries; our ability to obtain all necessary permits, licenses and regulatory approvals in a timely manner; governmental and other approvals; political unrest or instability in countries where Fortuna is active; labour relations issues; as well as those factors discussed under “Risk Factors” in the Company's Annual Information Form for the financial year ended December 31, 2022. Although the Company has attempted to identify important factors that could cause actual actions, events or results to differ materially from those described in Forward looking Statements, there may be other factors that cause actions, events or results to differ from those anticipated, estimated or intended.

Forward looking Statements contained herein are based on the assumptions, beliefs, expectations and opinions of management, including but not limited to expectations regarding the results from the exploration programs conducted at the San Jose Mine; expected trends in mineral prices and currency exchange rates; the accuracy of the Company’s information derived from its exploration programs at the Company’s mineral properties; current mineral resource and reserve estimates; the presence and continuity of mineralization at the San Jose Mine; that the Company’s activities will be in accordance with the Company’s public statements and stated goals; that there will be no material adverse change affecting the Company or its properties; that all required approvals will be obtained; that there will be no significant disruptions affecting operations and such other assumptions as set out herein. Forward looking Statements are made as of the date hereof and the Company disclaims any obligation to update any Forward looking Statements, whether as a result of new information, future events or results or otherwise, except as required by law. There can be no assurance that Forward looking Statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, investors should not place undue reliance on Forward looking Statements.

Cautionary Note to United States Investors Concerning Estimates of Reserves and Resources

Reserve and resource estimates included in this news release have been prepared in accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects ("NI 43-101") and the Canadian Institute of Mining, Metallurgy, and Petroleum Definition Standards on Mineral Resources and Mineral Reserves. NI 43-101 is a rule developed by the Canadian Securities Administrators that establishes standards for public disclosure by a Canadian company of scientific and technical information concerning mineral projects. Unless otherwise indicated, all mineral reserve and mineral resource estimates contained in the technical disclosure have been prepared in accordance with NI 43-101 and the Canadian Institute of Mining, Metallurgy and Petroleum Definition Standards on Mineral Resources and Reserves.

Canadian standards, including NI 43-101, differ significantly from the requirements of the Securities and Exchange Commission, and mineral reserve and resource information included in this news release may not be comparable to similar information disclosed by U.S. companies.

APPENDIX 1. Yessi vein drill results, San Jose Mine, Mexico

Hole IDEasting (NAD27_14N)Northing (NAD27_14N)Elevation (m)EOH Depth (m)1UTM AzimuthDipDepth From (m)Depth To (m)ETW
(m)2
Au (ppm)Ag (ppm)Ag Eq (ppm)3Hole Type4
SJOM-138774529818476501236355.6101-122032051.80.436092DD
including      202.62030.50.6993144DD
       2392401.10.86109174DD
       2412420.52.25243412DD
       2502510.92.27229400DD
       2522530.91.70196324DD
       2682701.00.7588144DD
       2702711.10.6279126DD
       2742751.11.88242383DD
       2892911.30.6774124DD
       3013149.96.408201,299DD
including      3013020.60.6279125DD
and      3023030.74.277431,063DD
and      303304.51.40.6071116DD
and      304.53050.40.5665107DD
and      3053071.24.56556898DD
and      3073081.24.31531854DD
and      3083090.927.523,5165,580DD
and      3093100.43.62571843DD
and      3103110.41.67276401DD
and      3113121.311.971,5692,467DD
and      3123130.78.708581,511DD
and      3133140.81.16157244DD
       3203221.50.78132191DD
SJOM-139174529818476501236360.0101-202092132.41.74226357DD
including      2122130.45.927791,223DD
       3373455.03.13386621DD
including      3373380.61.13191276DD
and      3383401.03.51455718DD
and      340340.30.54.32488812DD
and      3423430.70.9895169DD
and      343343.40.23.77481764DD
and      344.63450.210.361,5252,302DD
SJOM-139674529818476491237402.2102-31921963.50.445083DD
including      194.81961.30.535999DD
       263.6264.40.72.50295483DD
       2732751.40.5673115DD
       2752760.80.78105163DD


1 EOH: End of hole
2 ETW: Estimated true width
3 Ag Eq calculated using a factor of 75:1 using metal prices of US$1,840/oz for gold with 90% metallurgical recovery, and US$24.14/oz for silver with 91% metallurgical recovery
4 DD: Diamond drilling tail

 

 A photo accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/abcb1e98-17b8-45c4-aca3-018efe883af2


Primary Logo

Data & News supplied by www.cloudquote.io
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.