Star Copper Reports Overlimit Samples, Increases Grade Profile from Surface
By:
ACCESS Newswire
September 30, 2025 at 03:01 AM EDT
ⓘ This article is third-party content and does not represent the views of this site. We make no guarantees regarding its accuracy or completeness.
Phase 1 Additional Holes Still Pending VANCOUVER, BC / ACCESS Newswire / September 30, 2025 / Star Copper Corp. (CSE:STCU)(OTCQX:STCUF)(FWB:SOP) ("Star Copper" or the "Company"), a critical minerals exploration and development company is pleased to announce it has received the overlimit samples from holes 50., 51 and 52. Highlights with Overlimit
Overlimit assays (Cu<10,000ppm) are included for S050 from 38-47m-, S051 from 35-38m, 42.6-53m, 56-62m, 68-74m, and S051 from 68-70.25m. Additional results from the Phase 1 campaign plus pending data for three (3) more holes from Phase 1 along with assay results are expected in the coming weeks and will be reported as received, vetted and interpreted. In summary, the initial Phase 1 results from drill holes S-050, S-051 and S-052 confirm a broad near-surface supergene copper enrichment blanket at Star Main covering 300 x 250 m to a depth of 100 m, with multiple intervals at or above the analytical upper limit of 10,000 ppm Cu (≥1.00% Cu) Star Copper is extremely pleased to report that based on the results from the first three holes of the initial six-hole drill program, the Company now has a greater understanding of the relationship between the Project's fault structure and grade of the supergene zone through the clarification of the transition to hypogene copper mineralization. Table 1 - Select results from Phase 1 drill campaign at Star Project. Star Copper 2025
Table 1 Footnotes: (1) Widths reported are drill widths, true thicknesses are unknown. (2) All assay intervals represent length-weighted averages. (3) Copper equivalent (CuEQ) calculations use metal prices of: Cu US$4.00/lb, and Au US$3000/oz., and conceptual recoveries of: Cu 80%, and Au 80%. Conversion of metals to an equivalent copper grade based on these metal prices is relative to the copper price per unit mass factored by conceptual recoveries for those metals normalized to the conceptualized copper recovery. The metal equivalencies for each metal are added to the copper grade. The general formula for this is: CuEQ% = Cu% + ((Au g/t * Au $ g.*Au Recovery) / ( Cu $/t. * 22.046 *Cu Recovery)) (4) Overlimit assays (Cu<10,000ppm) are included for S050 from 38-47m-, S051 from 35-38m, 42.6-53m, 56-62m, 68-74m, and S051 from 68-70.25m. Table 2 - Collar Table - UTM Zone 9N NAD83. Star Copper 2025
The first three holes all intersected significant supergene enriched mineralization in the first 100m with a transition to hypogene zonation below the fault structures showing vertical and lateral continuity at depth. Hole S-050, located 50m east of historic hole S-048, was stopped at 101m as it encountered clay gouges but ultimately delivered valuable information regarding the supergene cap. Hole S-051 was collared west of hole S-050 and intersected consistent supergene enrichment in the first 100m which transitioned to hypogene mineralization to a depth of 538m. Hole S-052 was collared 100m north of hole S-050 and was the deepest hole to date ending at approximately 674m. Again, this hole was successful in confirming the supergene system and subsequent transition to hypogene mineralization below the 100m threshold. Hole S-052 intersected a similar zone at the 200m depth level combined with the results including from S-051 confirming robust continuity (see Figure 1). ![]() Overall, the oxide footprint currently shows that at surface the Star Project holds significant mineral potential. The secondary goal of the Phase 2 drilling will be to confirm hypogene in step outs at depth to increase deposit model confidence of mineralization expansion. ![]() Key Takeaways and Outlook
QA/QC Statement Samples are shipped under chain-of-custody protocols to Bureau Veritas Laboratories, an ISO/IEC 17025 accredited laboratory. At Bureau Veritas, samples are dried, crushed, split, and pulverized to 85% passing 200 mesh. Analytical procedures include multi-element ICP-ES/MS following four-acid digestion, with gold and precious metals analyzed by fire assay with an atomic absorption or ICP finish. Star Copper implements a robust QA/QC program, including the insertion of a minimum 5% certified reference materials (standards), blanks, and field duplicates at regular intervals into the sample stream to monitor analytical accuracy and precision. The performance on the blind standards, blanks and duplicates achieved high levels of accuracy and reproducibility and has been verified by Jeremy Hanson, a qualified person as defined by NI-43-101. Qualified Person On Behalf of the Board of Directors Darryl Jones About Star Copper Corp. (CSE:STCU)(OTCQX:STCUF)(FWB:SOP/WKN A416ME) For more information visit: www.starcopper.com and to sign up for free news alerts please go to https://starcopper.com/news/news-alerts/, or follow us on X (formerly Twitter),Facebook or LinkedIn. More information in respect of the project, including historical drilling, is available under the Company's profile at www.sedarplus.ca and/or in the Company's February 26, 2025 technical report. Investor Relations Cautionary Note Regarding Forward-Looking Statements SOURCE: Star Copper Corp. View the original press release on ACCESS Newswire
Report this content
If you believe this article contains misleading, harmful, or spam content, please let us know. Report this articleMore NewsView MoreVia MarketBeat
Via MarketBeat
Tickers
LHX
MarketBeat Week in Review – 04/27 - 05/01 ↗
Today 7:00 EDT
Via MarketBeat
Recent QuotesView More
Stock Quote API & Stock News API supplied by www.cloudquote.io
Quotes delayed at least 20 minutes. By accessing this page, you agree to the Privacy Policy and Terms Of Service.
© 2025 FinancialContent. All rights reserved.
|

